Motorola Mobility T6FM1 Portable PCS GSM Transceiver with Bluetooth User Manual Scorpius E
Motorola Mobility LLC Portable PCS GSM Transceiver with Bluetooth Scorpius E
Contents
Exhibit 8B Users Manual
52
Making/Answering Calls
Making Calls
Making Calls........................................................................................................54
Calling the Same Party Again<Dialed Calls> ...................................................56
Redialing Automatically<Auto Redial>.............................................................58
Showing/Hiding Caller ID for Each Call<186/184> ...........................................58
Sending Push Signals Quickly
Making International Calls<WORLD CALL>.....................................................60
Making a Call by Specifying a Sub Address<Sub Address>..........................63
Warning with Display and Alarm when a Set Period Elapses during a Call
<In-Call Timer>....................................................................................................64
Talking Using Handsfree....................................................................................64
Talking in a Car, Hands Free<In-Car Handsfree>.............................................64
Talking via Bluetooth..........................................................................................65
Answering a Call
Receiving a Call ..................................................................................................65
Answering a Call by Pressing a Dial Key<Multi-key>......................................67
Answering a Call by Opening the Handset<Open to Answer>.......................67
Using Received Calls<Received Calls>............................................................67
Adjusting the Other Party's Volume during a Call...........................................68
Adjusting the Ringtone Volume ........................................................................69
Saving Power Consumption during a Call<Power Setting> ...........................69
53
When You are/were Unable to Answer Calls
Placing a Call on Hold When You Cannot Answer the Call ............................69
Setting the Response Hold Tone<Response Hold Tone> ...............................70
Placing a Call on Hold........................................................................................71
Setting the Answer Hold Tone and Image<Answer Hold> ..............................71
Using Public Mode (Drive Mode)<Public Mode (Drive Mode)>.......................72
Using Public Mode (Power Off)<Public Mode (Power Off)> ............................73
Checking Missed Calls.......................................................................................74
Recording of Voice/Video-clip Message from a Caller when You Cannot
Answer a Call<Answering Machine> ................................................................75
Playing/Deleting Record Message ....................................................................77
54
XXXXXMaking/Answering Calls
Making Calls
aEnter a phone number
• Enter up to 80 digits. If you enter more than 27 digits, only the last 26 digits are
displayed.
• Start from the area code even for a local call.
•i [Register] : Go to Step 2 (P95) in "Saving Contacts to Phonebook from
Received Calls or Dialed Calls".
■To make a call to a general phone
Area Code − City Code − Phone Number
■To make a call to a mobile phone
090−XXXX−XXXX/080−XXXX−XXXX
■To make a call to a PHS
070−XXXX−XXXX
bo/c
Start talking when the other party answers.
•i [Swap]: Calls up another function such as Phonebook. →P226
•0 to 9: Sends push signals (DTMF).
cp to terminate the call
• If you hear the Caller ID Display Request service voice prompt, make a call again sending the Caller ID.
■To correct an entered phone number
To delete an entered digit, use a to move the cursor to the right of the digit and press C.
To add a digit, use a to move the cursor to the position and enter the digit with the dial keys.
■Screen display during dialing
The other party's name appears if the party is saved in the Phonebook. However, when a call is made to a party that has
been saved as secret by setting "Secret Data" to "Hide", the phone number is displayed. (Checking the specifications)
The Function Menu on the Phone Number Entry Screen
aPhone number entry screen (P54) yh [Function] y Perform
the following operations
Attach Number
Enter the phone number referring to the phonebook or Dialed/Received Calls.
Insert
Enters "p", "w", or "n" at the cursor location. →P59
Caller ID
Makes a call after setting to show/hide the Caller ID. →P58
Phonebook
Dialed Calls
Received Calls
: Select the phonebook entry and press h [Select].
: Select a history and press h [Select].
: Select a history and press h [Select].
Phone number
entry screen
Talking screen
55
Making/Answering Calls XXXXX
Video Call
Makes a video call to the entered phone number.
Send Message
The entered phone number becomes the destination.
Compose and send a mail. →P172
Multi Number
Select a number to use for Caller ID when making calls. →P251
Add Intl Access No.
Adds an international access number at the beginning of the entered phone number. →P61
Add Country Code
Adds a country code at the beginning of the entered phone number. →P270
Insert
(Checking the specifications)
Editing Function
Uses the edit functions. →P261
Cancel Entry
Cancels storing. (Checking the specifications)
• Selecting "New Call" from the function menu during a call will bring up the phone number entry screen with "Browse" displayed.
(Checking the specifications)
• Selecting "New Call" from the function menu during a call to make a video call, will display a confirmation whether to dial after
disconnecting the current call. Pressing h [Yes] terminates the current call and makes a video call to the newly dialed
phone number.
The Function Menu on the Talking Screen
aTalking screen (P54) yh [Function] y Perform the following
operations
Mute
Turns off the sound.
Unmute
Cancels Mute.
Spkrphone On
Switches the sound source to the speaker to perform a Handsfree call.
Spkrphone Off
Cancels the Handsfree call.
My Personal Info
Displays your phone number.
Hold
Places the call on hold.
Use Bluetooth
• Searches and connects to a registered Bluetooth headset, etc. (Checking the specifications)
New Call
Places the active call on hold and makes another call. →P248
Attach Number
Video Call
Continued on the next page
56
XXXXXMaking/Answering Calls
Dialed Calls
Opens the Dialed Calls list.
Received Calls
Opens the Received Calls list.
Other Information
Displays other information. →P242 (Checking the specifications)
Dialed Calls
Calling the Same Party Again
Up to XX entries can be saved in the Dialed Calls for both voice calls and video calls. A
phone number, dialed date and time, ringing duration, and show/hide Caller ID are saved
in the Dialed Calls.
• If there are more than XX entries, the oldest entries will be overwritten first.
• Calling the same phone number overwrites the entry of the latest called date and time.
ar
• The other party's name appears if the party is saved in the Phonebook.
bSelect an entry yc
co/t
The phone number entry screen opens with the phone number entered.
do/c
• Press c to make a call in the same way (voice/video call) as the entry.
■To make a video call
Press t.
• You can also make a call by selecting an entry on the Dialed Calls list and performing Step 3 and subsequent steps.
• If the call was made using an additional number of Multi Number, the icon registered to the number is displayed. (Checking
the specifications)
• Calls made to a party saved as secret while "Secret Data" is set to "Hide", or a party whose calls are set to be rejected in
Phonebook are displayed as "Private" on the Dialed Calls list or Dial Calls detail screen.
• Calls made to parties who are not saved in the Phonebook are displayed as "Name unknown" on the Dialed Calls detail screen.
Dialed Calls list
Dialed Calls detail
screen
57
Making/Answering Calls XXXXX
■Icons on the Dialed Calls list (Checking the specifications)
The following icons indicate types of calls:
$★$: Voice Call $★$: Video Call $★$: Dialed Call $★$: Missed Dialed Call $★$: Number1 $★$: Number2
• Dialed calls made to parties saved in the Phonebook have icons saved under "Type".
The Function Menu on the Dialed Calls List and Dialed Calls Detail Screen
aDialed Calls list (P56)/Dialed Calls detail screen (P56) y
h [Function] y Perform the following operations
Store
Save a phone number from a call log to the Phonebook. Go to Step 2 (P95) in "Saving Contacts to Phonebook from
Received Calls or Dialed Calls".
Video Call
Makes a video call to the phone number in the history.
Delete
Deletes the selected/displayed entry.
yh [Yes]
Delete All
Deletes all entries from the Dialed Calls.
yh [Yes]
Caller ID
Sets to show/hide the Caller ID.
y "Show ID"/"Hide ID"
Send Message
Creates and sends a new mail with the phone number in the Dialed Calls. →P172
Add Digits
The phone number entry screen opens with the phone number in the history entered. Go to Step 2 in "Making a Call"
(P54).
Attach Number
Multi Number
Select a number and make a call. →P251
Copy All Text
Copies all text on the Dialed Calls detail screen.
Calling the Last Dialed Number
You can open the phone number entry screen with the last dialed number entered to make
a call easily.
acy $★$ (Accessories) y "Recent Calls" y "Notepad"
The phone number entry screen opens with the phone number entered.
bo/c
• Press c to make a call in the same way (voice/video call) as before.
Phonebook
Dialed Calls
Received Calls
: Opens the Phonebook list.
: Opens the Dialed Calls list.
: Opens the Received Calls list.
Continued on the next page
58
XXXXXMaking/Answering Calls
■To make a video call
Press t.
Auto Redial
Redialing Automatically
You can set the handset to redial automatically when a call was not connected due to a
busy line, etc. (Checking the specifications)
acy $★$ (Settings) y "General Settings" y "Auto Redial" y "On"/
"Off"
186/184
Showing/Hiding Caller ID for Each Call
There are 2 ways to show/hide Caller ID for each call: adding "184"/"186", or using the
function menu on the phone number entry screen.
Showing/Hiding Caller ID by Adding 184/186
aEnter "184"/"186" y enter the phone number
■To show Caller ID
Enter "186" before the phone number.
■To hide Caller ID
Enter "184" before the phone number.
bo/c
■To make a video call
Press t.
Showing/Hiding Caller ID Using the Function Menu
aEnter the phone number yh [Function] y "Caller ID" y
"Show ID"/"Hide ID"
bo/c
■To make a video call
Press t.
• The same operation is available from the Phonebook, Dialed Calls or Received Calls lists/detail screens.
• You can set to show/hide Caller ID to the network in advance. →P51
• You can set to Show/Hide Caller ID for each Contact. →P128
Default Off (Checking the specifications)
59
Making/Answering Calls XXXXX
Showing/Hiding Caller ID for the Next Call
You can set to show/hide the Caller ID for the next call in advance. (Checking the
specifications)
acy $★$ (Settings) y "In-Call Setup" y "Caller ID Notification"
y "Next Call Only" y "Show"/"Hide"
Sending Push Signals Quickly
Enter "p"/"w"/"n" and a number after the phone number to send number after the
alphabetic character as push signals (DTMF).
• Signals may not be received depending on the device on the receiving side.
Entering "p"
A call can be made with a "p" and a number after the phone number. After the number
before "p" is connected, the number after "p" is sent in DTMF about three seconds later.
This function is convenient for dialing an extension after a phone number is connected.
aEnter a phone number y h [Function] y "Insert" y "Pause"
y enter a number to send y o/c
After the call is connected, the number after "p" is sent automatically.
Entering "w"
A call can be made entering a "w" and a number after the phone number. When the
number before "w" is connected, the number after "w" is keyed in waiting to be sent in
DTMF. This function is convenient for sending a message to a pager, reserving tickets, or
checking the balance of your bank account over the phone.
aEnter a phone number y h [Function] y "Insert" y "Wait" y
Enter a number to send y o/c
b h [OK]
The number after "w" is sent.
Entering "n"
You can make a call entering "n" after a phone number and entering a number to be sent
instead of "n". After the number before "n" is connected, the number entered for "n" is
sent in DTMF. This function is convenient to make an international credit card call that is
connected using the access number and then requires a credit card number, PIN number
or a phone number.
*: From January, 2001, the DoCoMo pager service changed its name to QUICKCAST.
Continued on the next page
60
XXXXXMaking/Answering Calls
aEnter a phone number y h [Function] y "Insert" y "n" y
Enter a number to send y o/c
The entry screen of the number to be sent instead of "n" is displayed.
bEnter "n" value y i [OK]
When the call is connected, the entered number is sent instead of "n".
WORLD CALL
Making International Calls
WORLD CALL is an international calling service available from a DoCoMo mobile phone.
FOMA service subscribers are also signed up for WORLD CALL at the time of initial
subscription (except subscribers explicitly declining this service).
• You can make calls to about 220 countries and regions around the world.
• Charges for "WORLD CALL" are added to the monthly FOMA service call charges.
• No initial fee and no fixed monthly charges apply.
• This service is not available with some billing plans.
• For details on WORLD CALL, contact the "DoCoMo Information Center" on the back of this manual.
• When using international carriers other than DoCoMo, contact the prospective carrier directly.
Changes to the International Call Dialing Procedure
The "MY LINE" service is not applicable to mobile phone communications, including
WORLD CALL service. Along with the introduction of the "MY LINE" service, the dialing
procedure for international communications using a mobile phone has been changed.
Consequently, the previous dialing procedure (Step 1 in "Making an International Call"
(P37) without the prefix "010") can no longer be used.
Making an International Call by Entering a Phone Number
Enter the phone number in the following format:
aEnter "009130-010-Country Code-Area Code (City Code)-Phone
Number"
• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as
Italy, the leading "0" may be required)
bo/c
■To make a video call
Press t.
An "International Video Call" to an overseas party with a specific 3G mobile phone can be made by pressing
t after the following dialing procedures.
• For information about the countries where connection can be made and telecommunications carriers, refer
to the DoCoMo's Web site.
• For details, contact the "DoCoMo Information Center" on the back of this manual.
61
Making/Answering Calls XXXXX
Making an International Call Using "+"
Enter "+" at the beginning of a phone number and dial to replace "+" with an international
access code automatically. Press 0 for 1+ seconds to enter "+".
• Set "Auto-Assist Settings" of "International Access Code" to "On" before making a call. →P62
• The automatically added International Access Code is set to WORLD CALL (009130010) by default. →P62
a0 (for 1+ seconds) y Enter "Country Code - Area Code (City
Code) - Phone Number"
• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as
Italy, the leading "0" may be required).
bo/c
The confirmation to dial is displayed.
• The phone number with the International Access Code added is displayed on the confirmation to dial
screen.
■To make a video call
Press t.
ch [Yes]
• This option is available only inside the FOMA network service area.
• If the phone number has "+81" as its prefix, "+" will not be converted into the International Access Code.
Making an International Call Using a Function Menu
You can select an international access code from the function menu and add it to the
phone number.
aEnter "Country Code - Area Code (City Code) - Phone Number"
• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as
Italy, the leading "0" may be required).
bh [Function] y "Add International Access No." y Select a
number yh [Select]
The international access code is added at the beginning of the phone number.
co/c
■To make a video call
Press t.
• WORLD CALL is set as the international access code by default. International access codes can be added. →P62
62
XXXXXMaking/Answering Calls
Making an International Call Easily
Setting to Add the International Access Code Automatically
You can set whether to add an international access code automatically instead of "+"
when you make a call by entering "+" at the beginning of the phone number. Also, you can
specify the international access code to be added automatically.
acy $★$ (Settings) y "In-Call Setup" y "Intl Dial Settings" y
"Intl Access Code" y "Auto-Assist Settings" y Perform the
following operations
Auto Assist
y"On"/"Off"
Access Code
y Select an International access code yh [Select]
• You can save international access codes under "IDD Prefix Settings".
International Call Setting
Storing International Access Codes
Up to three international access codes can be stored.
acy $★$ (Settings) y "In-Call Setup" y "Intl Dial
Settings" y "Intl Access Code" y "IDD Prefix
Settings"
•c: View the stored international access codes.
b"[New Entry]" y Perform the following operations
Name
Save the name of the international access code. Up to XX full-pitch or XX half-pitch characters can be entered.
y Enter the name yi [OK]
Access Code
Up to XX digits can be entered.
y Enter the access code yi [OK]
ch [Complete]
Default Auto Assist: Off Access Code: World Call (0091300101)
Access Code
IDD Prefix Settings
screen
63
Making/Answering Calls XXXXX
• The following operations are available by pressing h [Function] on the name entry screen/access number entry screen:
- Select "Editing Function" to edit text. →P261
- Select "Cancel Entry" to cancel saving.
The Function Menu on the IDD Prefix Settings Screen
• The function menu is available only while a saved international access code is selected.
aIDD Prefix Settings screen (P62) yh [Function] y Perform the
following operations
Edit
You can correct the selected international access code. Go to Step 2 of "Storing International Access Code" (P62).
Delete
The selected international access code will be deleted.
New
Go to Step 2 of "Storing International Access Code" (P62).
• The pre-installed "World Call" number can also be edited.
• The international access number set as Auto-Assist cannot be deleted.
Sub Address
Making a Call by Specifying a Sub Address
You can set whether digits after "*" of a phone number with "*" inserted are identified as a
sub-address. A sub-address is used to call up a specific device connected to an ISDN line
or to select contents on "V live".
acy $★$ (Settings) y "In-Call Setup" y "Sub Address" y "On"/
"Off"
• "*" is not identified as a delimiter of a sub-address if: (Checking the specifications)
- "*" is entered at the beginning of the phone number
- A specific number such as "184" or "186" is entered at the beginning of the phone number
- "*" is entered right after "p" or "w"
Edit
Delete
Default (Checking the specifications)
64
XXXXXMaking/Answering Calls
In-Call Timer
Warning with Display and Alarm when a Set Period
Elapses during a Call
You can set to warn by displaying information about a call on the screen and sounding an
alarm if the set period of time elapses during the call. (Checking the specifications)
acy (Settings) y "In-Call Setup" y "In-Call Timer" y Perform
the following operations
Display
Beep
Enter an interval between Beeps of the range from 1 second to 999 seconds.
y "60 Seconds"/"Off" y Enter Beep interval yi [OK]
• The alarm setting completes if you select "Off".
• The following operations are available by pressing h [Function] on the alarm interval entry screen:
- Select "Editing Function" to edit text. →P261
- Select "Cancel Entry" to cancel saving.
• If "Credit Available" is set, it is impossible to make a call and the counter is reset when exceeding the "Credit Limit".
Talking Using Handsfree
You can set to hear the other party's voice from the speaker.
aTalking screen (P54) yh [Function] y "Spkrphone On"
■To cancel a handsfree talking
Press h [Function] and select "Spkrphone Off". (Checking the specifications)
• Keep a distance of at least XX cm between the handset and your ear during a Handsfree call.
• To operate during a video call →P83
In-Car Handsfree
Talking in a Car, Hands Free
Connecting the handset to a handsfree device, such as an in-car handsfree kit 01
(optional) or a car navigation system, allows you to make or receive a voice call from a
handsfree device.
Default Display: Off Beep: Off
Time
Credit Available
Off
: Shows the duration of the call.
: Shows the available remaining amount to the amount set under "Credit Limit".
: Nothing is displayed.
Display
65
Making/Answering Calls XXXXX
For operations of a handsfree device, refer to the user manual of the device. To use an in-
car handsfree kit 01 (optional) via USB, a FOMA in-car handsfree cable 01 (optional) is
necessary.
• If you connect the handset with a Bluetooth handsfree device via a Bluetooth connection, register the device before
connecting.
• To use a handsfree device via USB connection, set "USB Mode Settings" to "Data Connection".
• Screen display for incoming or a ringtone are in accord with the settings on the handset.
• When you switch to handsfree, a ringtone sounds from the handsfree device even if Manner Mode is set or "Ring Volume" is
set to "0" for the handset.
• The incoming call actions with Public Mode (Drive Mode) activated is in accord with Public Mode (Drive Mode) settings.
• The ring actions with Answering Machine activated is in accord with the "Record Message" settings.
• Folding the handset during a call does not affect the call. (Checking the specifications)
Talking via Bluetooth
You can talk connecting the handset to a commercially available Bluetooth device such
as a Bluetooth headset.
• Register the Bluetooth device before connecting it to the handset. →P239
• For operations of a Bluetooth device, refer to the user manual of the device.
aMake/Receive a Call using a Bluetooth device
•$★$ appears when the handset is connected to a Bluetooth device.
■To switch to a Bluetooth device during a call
(Checking the specifications)
Receiving a Call
aA call arrives
The ringtone sounds and the incoming call lamp blinks.
•NM: Stops the ringtone or vibration.
bo/i [Answer]
Answer the call.
cp to terminate the call
■Display of the Incoming call screen (with Caller ID)
If the caller is saved in the Phonebook, the name and phone number are displayed. If an image is saved in the Phonebook,
the specified image is displayed. (Checking the specifications)
• If an image is saved for a group, the image for the group takes precedence to be displayed. (Checking the specifications)
• When the "Secret Data" is set to "Hide", "Private ID" is displayed when a call arrives from a caller saved as secret in the
Phonebook.
Incoming call
screen
To be inserted
Continued on the next page
66
XXXXXMaking/Answering Calls
• If a call arrives to an additional number of Multi Number, the ringtone set in "Multi Number" sounds and the following icon
appears on the incoming screen:
$★$/$★$: Incoming voice call
$★$/$★$: Incoming video call
$★$/$★$: Incoming data
■Display on the Incoming call screen (without Caller ID)
The reason for no Caller ID is displayed instead of a phone number. →P127
• The incoming call actions such as a ringtone, vibration or screen display vary depending on the settings in "Style". →P106,
P108
• When Manner Mode is set, the ringtone does not sound. When Public Mode (Drive Mode) is set, the ringtone does not sound
and the incoming call lamp does not blink.
• When "Multi-key" is set, you can answer the call by pressing a key other than the key in Step 2.
• When "Open to Answer" is set, you can answer a call by opening the handset.
• If you subscribe to the Voicemail, Call Waiting or Call Forwarding service, when "Incoming Call Mgmt" is set to "Answer Call"
and "Incoming Call Setting" is enabled, a busy tone during a call sounds if a call arrives during another call, If a busy tone
during a call sounds, each service is available. →P251
• You can set "Ring Delay" to delay the incoming call action for a call made from a party not saved in the Phonebook.
• Use the following functions to reject incoming calls from a caller not saved in Contacts/specific caller.
- Set "Not in Phonebook" to "Reject".
- Set "Reject Calls" of Phonebook to "Yes".
The Function Menu on the Incoming Call Screen
aIncoming call screen (P65) yh [Function] y Perform the
following operations
Answer
Answer the ringing call.
End Active Call & Answer
Terminate an active voice call to answer a ringing call.
End Held Call & Answer
Terminates a call on answer hold to answer another call. (Checking the specifications)
Reject Call
Reject an incoming call and hang up.
Response Hold
Places the call on hold.
Voicemail
Connects a call to the Voicemail center.
Call Forwarding
Transfers an incoming call to the specified number.
• This option is not available unless you subscribe to the Voicemail service.
• This option is not available unless you subscribe to the Call Forwarding service and you specify a forwarding destination.
Voicemail
Call Forwarding
67
Making/Answering Calls XXXXX
Multi-key
Answering a Call by Pressing a Dial Key
You can set to answer a voice call by pressing a key other than i [Answer], o, J
(for 1+ seconds). (Checking the specifications)
acy $★$ (Settings) y "In-Call Setup" y "Answer Function" y
"Multi-key" y "On"/"Off"
• After setting, the following keys can be used to answer a call.
t, m, 0 to 9, *, #, c, C
• This function is not available when a video call arrives.
Open to Answer
Answering a Call by Opening the Handset
You can set to answer a voice or video call by simply opening the handset when a call
arrives while the handset is folded.
acy $★$ (Settings) y "In-Call Setup" y "Answer Function" y
"Open to Answer" y "On"/"Off"
• When "Open to Answer" is set, answer hold operations or function menu of the incoming call screen are unavailable.
Received Calls
Using Received Calls
Up to 20 incoming voice or video call entries are saved in Received Calls. A phone
number, received date and time, ringing duration, and show/hide Caller ID are saved in the
entries.
• If there are more than 20 entries, the oldest entries will be overwritten first.
• Receiving a call from the same phone number overwrites the entry of the latest received date and time.
aly "Received Calls"
• The caller's name appears if the caller is saved in the Phonebook.
Default On
Default On
Received Calls list
Continued on the next page
68
XXXXXMaking/Answering Calls
bSelect an entry yc
co/t
The phone number entry screen opens with the phone number entered.
do/c
• Press c to make a call in the same way (voice/video call) as the entry.
■To make a video call
Press t.
• Operations of a function menu from the Received Calls list or Received Calls detail screen are the same as the Dialed Calls
list or Dialed Calls detail screen. →P57
• You can make a call also by selecting an entry on the Received Calls list and performing Step 3 and subsequent steps.
• If the call arrives to an additional number of Multi Number, the icon of the number is displayed. (Checking the specifications)
• The reason for no Caller ID is displayed for the call log entry without Caller ID. →P127
• Dialed Calls entries from a caller who is saved as secret when "Secret Data" is set to "Hide", or a caller whose calls are set to
be rejected in Phonebook are displayed as "Secret" on the Received Calls list or Received Calls detail screen.
• Calls made to parties who are not saved in the Phonebook are displayed as "Name unknown" on the Received Calls detail
screen.
• When "Show in Call Logs" is set to "Off", a call that is hung up within the time set in "Ring Delay" is not saved in Received Calls.
• The call log entry of a dialed call may have a different number from the number actually dialed.
■Icons on the Received Calls list screen (Checking the specifications)
The following icons indicate types of calls:
$★$: Voice call $★$: Video call $★$: Connected call $★$: Missed call $★$: Number1 $★$: Number2
• Received calls from parties saved in the Phonebook have icons saved under "Type".
Adjusting the Other Party's Volume during a Call
The earpiece volume can be adjusted in X levels from X to X. (Checking the
specifications)
aTalking screen (P54) yN/M
•N: Increases the volume.
•M: Decreases the volume.
• The adjusted earpiece volume will be retained after the call. (Checking the specifications)
Default (Checking the specifications)
Received Calls
detail screen
Screen to be
inserted
69
Making/Answering Calls XXXXX
Adjusting the Ringtone Volume
The ringtone volume can be adjusted in 8 levels from 0 to 7.
• The default settings vary depending on the settings of "Style".
aN/M
• When the volume is set to "1", pressing M sets "Vibrate" and pressing M again sets "Silent".
• You can also set the ringtone volume using "Detail" under "Sound Profiles".
• The ringtone volume cannot be adjusted when Manner Mode is set.
• The set volume is used for incoming calls, incoming mails, Voicemail calls, Calendar alarms, incoming data, and Reminders.
(Checking the specifications)
Power Setting
Saving Power Consumption during a Call
(Checking the specifications)
acy $★$ (Settings) y "General Settings" y "Battery Save" y
"On"/"Off"
Placing a Call on Hold When You Cannot Answer the Call
aIncoming call screen (P65) yp
The call is placed on answer hold. The caller hears the hold tone set in
"Response Hold Tone" under "Call Hold".
bo when you can answer the call
■Video calls
Press o/t to send a camera image to the other party. Press i [Use Image] to send the
image set in "Alternate image"/Chara-den to the other party.
■To terminate a call
Press p.
• The caller is charged even during an answer hold.
• When the handset is folded and "Open to Answer" is set, answer hold is not available.
Default 7
Default On
Response Hold
screen
Screen to be
inserted
Continued on the next page
70
XXXXXMaking/Answering Calls
• If you subscribe to the Voicemail service/Call Forwarding service, you can connect the incoming call to the Voicemail Center
or forward the incoming call to the specified phone number. →P66, P84
Response Hold Tone
Setting the Response Hold Tone
You can set the response hold tone to Japanese/English. You can also record and set a
personal answer hold tone.
Specifying a Response Hold Tone
acy$★$ (Settings) y "In-Call Setup" y "Call
Hold" y "Response Hold Tone"
Japanese : The response hold tone is set to Japanese.
English : The response hold tone is set to English.
Personal : The response hold tone is set to Recorded data.
bSelect a hold tone yc
• If an Answer Hold Tone has not been recorded, "Personal" is displayed as "New".
■Response Hold Tone
An Response hold tone is played as follows:
Japanese
I cannot take your call now. Please wait or call again later.
English
I cannot take your call now. Please hold the line for a moment or call me back later. Thank you.
Recording Response Hold Tone
aResponse Hold Tone screen (P70) y Select "New" y
h [Record]
Start recording. After recording finishes, the Response Hold Tone screen returns.
• After recording completes, "New" is changed to "Personal".
• For recording, see "Recording Voice Notes" (P218).
Default Japanese
Personal
Response Hold
Tone screen
71
Making/Answering Calls XXXXX
The Function Menu on the Response Hold Tone Screen
aResponse Hold Tone screen (P70) yh [Function] y Perform
the following operations
Set as Default
Sets the selected item as the response hold tone.
Play
Plays the selected item.
Rerecord
Records the data again.
yh [Yes] y Record
Delete
Deletes the recorded data.
Placing a Call on Hold
aTalking screen (P54) yh [Function] y "Hold"
The call is placed on hold. The hold tone set in "Answer Hold" under "Call Hold" is played
to the caller.
■Video calls
The hold tone and image set in "Videocall Hold" under "Call Hold" are sent to the caller.
bo when you can answer the call (Checking the specifications)
■Video calls
Press o/t to send a camera image to the other party. Press i [Use Image] to send the
image set in "Alternate Image"/Chara-den to the other party. (Checking the specifications)
■To terminate a call
Press p.
Answer Hold
Setting the Answer Hold Tone and Image
You can set a hold tone and an image that is displayed on your handset and the other
party's while a call is on hold. (Checking the specifications)
acy $★$ (Settings) y "In-Call Setup" y "Call Hold" y"Answer
Hold" y Perform the following operations
Answer Hold Tone
Answer Hold Image
y Select a folder ycy Select an image yc
Default Answer Hold Tone: Japanese Answer Hold Image: (Checking the specifications)
Japanese
English
: The answer hold tone is set to Japanese.
: The answer hold tone is set to English.
Continued on the next page
72
XXXXXMaking/Answering Calls
■Answer hold tone
The Answer hold tone is played as follows:
Japanese
(Checking the specifications)
English
(Checking the specifications)
Public Mode (Drive Mode)
Using Public Mode (Drive Mode)
Public Mode is an automatic response service to assist in observing manners in public
locations. When Public Mode is set, a voice prompt is played to the caller indicating that
you are driving or at a place where you cannot talk (such as on a train, bus, or in a movie
theater) and cannot answer the call, and the call is disconnected.
• You can set or cancel Public Mode only in Standby (and when $★$ is displayed).
• This option is not available during data communication.
a* (for 1+ seconds)
When a call arrives, a voice prompt is played indicating that "you are either driving or at a
place where you cannot use the handset and cannot answer the call. Please call again
later.".
■To cancel Public Mode (Drive Mode)
Press * (for 1+ seconds) on the wallpaper screen.
■When Public Mode (Drive Mode) is set
Even when a call arrives to your handset, the ringtone does not sound. "X Missed Calls" is displayed on the screen and the
call is stored in Received Calls.
A voice prompt indicating that you are driving or you are at a location where you cannot use the handset is played to the
caller, and the call is disconnected.
•$★$ appears at the top of the screen when Public Mode is set.
• Even when Public Mode is set, you can make calls as usual.
• If a call with "Private Calling" arrives when Caller ID Display Request Service is set, a voice prompt of Caller ID Display
Request service is played (instead of Public Mode voice prompt).
• If Manner Mode is set concurrently, Public Mode (Drive Mode) settings take precedence.
• No tones from FOMA handset sound when Public Mode (Drive Mode) is set.
Incoming Call Actions When a Network Service and Public Mode (Drive
Mode) are Set
Actions performed when Public Mode and a Network Service are set concurrently.
Service Incoming Actions for a Voice Call Incoming Actions for a Video Call
Voicemail service After the Public Mode voice prompt is
played, the call is connected to the
Voicemail Center.*
The Public Mode image prompt does not
appear, and the call is connected to the
Voicemail Center.
Call Waiting service After the Public Mode voice prompt is
played, the call is terminated.
After the Public Mode image prompt is
shown, the call is terminated.
73
Making/Answering Calls XXXXX
*: If the ring time for a Network Service is set to 0 (zero) seconds, the Public Mode voice prompt is not played, and the call is not
recorded in Received Calls.
Public Mode (Power Off)
Using Public Mode (Power Off)
Public Mode (Power Off) is an automatic response service to assist with observing
manners in public locations. When Public Mode (Power Off) is set, when a call arrives
while the power is turned off, a voice prompt is played to the caller indicating that you are
at a place where the device must be turned off (such as in hospitals, in aircraft, or near
priority seats on a train) and cannot answer the call, and the call is disconnected.
aEnter "*25251" yo
Public Mode (Power Off) is set (the stand-by display appears the same).
After Public Mode (Power Off) is set, when a call arrives while the power is turned off, a
voice prompt is played indicating that "you are at a place where you must turn the device
off and cannot answer the call. Please call again later".
■To cancel Public Mode (Power Off)
Enter "*25250" and press o.
■To check the status of Public Mode (Power Off)
Enter "*25259" and press o.
■After setting Public Mode (Power Off)
Public Mode (Power Off) is activated until it is cancelled by dialing "*25250". Turning the power On does not cancel the
mode.
The Public Mode (Power Off) voice prompt is played even when you are out of the service area or where no signals are
received. A voice prompt indicating that you are at a location where you must turn the device off is played to the caller, and
the call is disconnected.
Call Forwarding service After the Public Mode voice prompt is
played, the call is forwarded to the
forwarding destination.*
Whether the Public Mode voice
prompt is played varies depending
on the settings of Call Forwarding
service voice prompt option.
The Public Mode image prompt does not
appear, and the call is forwarded to the
forwarding destination. If the forwarding
destination cannot handle video calls,
the call is terminated.
Nuisance Call Barring
service
If the caller is saved to reject a
nuisance call, the reject call voice
prompt is played and the call is
terminated.
In a case other than the above, the
Public Mode voice prompt is played
and the call is terminated.
If the caller is saved to reject a nuisance
call, the reject call image prompt is
shown and the call is terminated.
In a case other than the above, the
Public Mode image prompt is shown and
the call is terminated.
Caller ID Display Request
service
If the caller does not send the Caller
ID, the Caller ID display request
voice prompt is played and the call is
terminated.
If the caller sends the Caller ID, the
Public Mode voice prompt is played
and the call is terminated.
If the caller does not send the Caller ID,
the Caller ID display request voice
prompt is played and the call is
terminated.
If the caller sends the Caller ID, the
Public Mode image prompt is shown and
the call is terminated.
Service Incoming Actions for a Voice Call Incoming Actions for a Video Call
Continued on the next page
74
XXXXXMaking/Answering Calls
Incoming Call Actions When a Network Service and Public Mode (Power
Off) are Set
Actions performed when Public Mode and a Network Service are set concurrently.
*: If the ring time for a Network Service is set to 0 (zero) seconds, the Public Mode (Power Off) voice prompt is not played, and the
call is not recorded in Received Calls.
Checking Missed Calls
If you could not answer a call, the Missed call notification screen is displayed on the
wallpaper screen. From the Missed call notification screen, you can check the caller.
aAn incoming call terminates
The number of missed calls is displayed.
•i [Exit]: The Missed call notification screen is closed.
bh [View]
The Received list screen opens. $★$ appears for a Missed Call.
cSelect a missed call entry yc
The Received Calls list detail screen opens.
Service Incoming Actions for a Voice Call Incoming Actions for a Video Call
Voicemail service After the Public Mode (Power Off)
voice prompt is played, the call is
connected to the Voicemail Center.*
The Public Mode (Power Off) voice
prompt is not played, and the call is
connected to the Voicemail Center.
Call Forwarding service After the Public Mode (Power Off)
voice prompt is played, the call is
connected to the forwarding
destination.*
Whether the Public Mode voice
prompt is played is according to the
settings of Call Forwarding service
voice prompt option.
The Public Mode (Power Off) image
prompt does not appear, and the call is
forwarded to the forwarding destination.
If the forwarding destination cannot
handle video calls, the call is terminated.
Nuisance Call Barring
service
If the caller is saved to reject a
nuisance call, the reject call voice
prompt is played and the call is
terminated.
In a case other than the above, the
Public Mode (Power Off) voice
prompt is played and the call is
terminated.
If the caller is saved to reject a nuisance
call, a message indicating that the call
was not connected and the call is
terminated.
In a case other than the above, the
Public Mode (Power Off) image prompt
is shown and the call is terminated.
Caller ID Display Request
service
If the caller does not send the Caller
ID, the Caller ID display request
voice prompt is played and the call is
terminated.
If the caller sends the Caller ID, the
Public Mode (Power Off) voice
prompt is played and the call is
terminated.
If the caller does not send the Caller ID,
the Caller ID display request voice
prompt is played and the call is
terminated.
If the caller sends the Caller ID, the
Public Mode (Power Off) image prompt
is shown and the call is terminated.
Missed call
notification screen
75
Making/Answering Calls XXXXX
• After checking a missed call, the notification screen will not open.
• When "Show in Call Logs" is set to "No", the Missed call notification screen for a call that is hung up within the time set in "Ring
Delay" is not displayed.
Answering Machine
Recording of Voice/Video-clip Message from a Caller
when You Cannot Answer a Call
Even if you do not subscribe to the Voicemail service, a response message indicating that
you cannot answer the call can be played, and your handset can record the voice/image
message.
Setting the Answering Machine
acy $★$ (Accessories) y "Record Message"
yh [Function] y "Setting"
bPerform the following operations
Record Message
Activate/deactivate the Answering Machine.
y"On"/"Off"
Response Time
Set the duration of time from when the call arrives until Answering Machine launches. Enter between XX - XX seconds.
Use j to enter the time yh [OK]
Record Time
Set the recording time for the Answering Machine.
Select a recording time yh [Select]
Response Greeting
Response Image
Default
Record Message: Off
Response Time: 8Sec
Record Time: 30Sec
Response Greeting: Japanese
Response Image: Japanese
Japanese
English
Personal
: The message language is set to Japanese.
: The message language is set to English.
: The message is set as Recorded data.
Japanese
English
: The Response image is set to Japanese.
: The Response image is set to English.
Settings screen
Continued on the next page
76
XXXXXMaking/Answering Calls
•$★$ appears at the top of the screen when the Answering Machine is set.
• The time also can be entered using dial keys.
• If the Response time is set longer than the ring time of the Voicemail/Call Forwarding service, the setting for the service takes
precedence.
• If the Response time is set shorter than the set "Ring Delay", Answering Machine launches without the ring action.
• If the Response Greeting has not been recorded, "Personal" is displayed as "New".
• If recorded data is deleted, the Response Greeting reverts to "Japanese". (Checking the specifications)
• The following operations are available by pressing h [Function] on the Response image list:
- Select "Set as Default" to set the selected item as the Response image.
- Select "Preview" to view the selected response image.
Response Greeting
Recording a Response Greeting
aSettings screen (P75) y "Response Greeting"
bSelect "New" yc
• After recording completes, "New" is changed to "Personal".
• For recording, see "Recording Voice Notes" (P218).
The Function Menu on Greeting List
aGreeting List screen (P76) yh [Function] y Perform the
following operations
Set as Default
Sets the selected item as the Response Greeting.
Play
Plays the selected Response Greeting.
Edit
Records the greeting again.
Delete
Deletes the recorded greeting.
yh [Yes]
Response Time
Response Greeting
Response Image
Greeting List
77
Making/Answering Calls XXXXX
When Record Message is Activated
The caller's voice is recorded for a voice call, and the caller's image for a video call.
aA call arrives y the Response Message is played
The Response Message is played after the set response time elapses.
The Response Image is also sent for a video call.
•h [Answer]: Stop the Response Greeting and answer the call.
•i [Disconnect]: Disconnect the call.
bRecording starts
The other party's voice in recording hears from the earpiece.
•h [Answer]: Stop recording and answer the call.
•i [Disconnect]: Disconnect the call.
cRecording completes
•h [Play]: Play the Answering Machine message.
■If more than one message/video clip is recorded in the Answering
Machine
The number of recordings is displayed on the New Message notification
screen. Press [View] to display the Recorded message list.
• The number of messages that can be recorded varies depending on the available memory space. You can check the available
memory space for recording messages. →P78
• The Answering Machine is not available when $★$ is displayed, the handset power is turned off, or Public Mode (Drive Mode)
is set.
Playing/Deleting Record Message
Playing Record Message
acy $★$ (Accessories) y "Record Message"
• The caller's name appears if a caller saved in the Phonebook recorded a
message. (Checking the specifications)
■Notice
It is recommended that you write down messages from the Answering Machine and store them in a
separate location. DoCoMo is not responsible for lost recorded messages due to failure or repair of the
FOMA handset.
Greeting playback
screen
Recording Message
New Message
notification screen
Recorded message
list
Screen to be
inserted
78
XXXXXMaking/Answering Calls
bSelect a recorded message yc
The message is played.
•/
cu: Pauses.
•l/r: Plays the previous/next message.
•d: Stops the playback.
•i [Return]: Returns to the Recorded message list screen. (Checking the specifications)
■Icons on the Recorded message list screen (Checking the specifications)
The following icons indicate types of messages:
$★$: Unchecked voice call message $★$: Unchecked video call message
$★$: Checked voice call message $★$: Checked video call message
$★$: Protected voice call message $★$: Protected video call message
• The function menu operations on the Answering Machine playback screen are identical to those on the melody playback
screen.(Checking the specifications) →P213
The Function Menu on the Recorded Message List
aRecorded message list screen (P77) yh [Function] y Perform
the following operations
Play
Plays the selected message recorded in the answering Machine.
Call
Make a call to the phone number of the selected message recorded in the Answering Machine.
yo/t
Add to Ph Book
Save the caller's phone number of the selected message recorded in the Answering Machine to the phonebook. Go to
Step 2 in "Saving Contacts to Phonebook from Received Calls or Dialed Calls" (P94).
Delete
Deletes the selected message recorded in the Answering Machine.
yh [Yes]
Delete All
Deletes all messages recorded in the Answering Machine.
yh [Yes]
Lock・Unlock
Protects/Unprotects a message recorded in the Answering Machine.
Settings
Sets the Answering Machine. Go to Step 2 (P95) in "Setting the Answering Machine".
View Free Space
Checks the available space, used space and total space for Answering Machine.
79
Making/Answering Video Calls
Video Calls ..................................................................................................................80
Making a Video Call ....................................................................................................80
Receiving a Video Call................................................................................................83
Using Chara-den .........................................................................................................85
Setting the Image to Send to the Other Party ..........................................................85
Setting Handsfree for Video Calls<Handsfree> .......................................................86
Setting a Displayed Image during a Video Call........................................................86
Setting a Video Call Hold Tone and Image<Videocall Hold> ..................................87
Changing the Video Call Settings<Video Call Settings>.........................................88
80
Making/Answering Video Calls XXXXX
Video Calls
Video calls are available between DoCoMo video-phones.
• DoCoMo video-phones comply with "3G-324M*1, an international standard for 3GPP*2". The handset cannot
connect to a video phone that uses a different system from DoCoMo video-phones.
*1: 3G-324M
This is an international standard for the third generation of mobile video-phones.
*2: 3GPP (3rd Generation Partnership Project)
This is a regional standards organization for developing common technological specifications for the third
generation mobile communication system (IMT-2000).
Components of Video Call Screen
aMain window
bSub window
cThe other party's phone number/name
dCall duration
eOperation icon
$★$/$★$ (Image): Switches between the camera image and alternate
image
$★$/$★$ (On hold): Places a call on hold
$★$/$★$ (Speaker): Sets/cancels Handsfree
$★$/$★$ (Window): Switches between the main and sub windows
$★$/$★$ (Camera): Switches between the internal and external views of the camera
Making a Video Call
aEnter a phone number
• The function menu on the phone number entry screen →P54
• Start from the city code even for an inside the city call.
■To make a call to a general phone
■To make a call to a mobile phone
090−XXXX−XXXX/080−XXXX−XXXX
■To make a call to a PHS
070−XXXX−XXXX
bt
Start talking when the other party answers.
• Digital communication charges apply from the time
the Connecting screen is displayed.
•j: Enlarge or shrink the camera image.
•0 to 9: Sends push signals (DTMF).
cp to terminate the call
Area Code −City Code −Phone Number
a
b
c
d
Phone number
entry screen
Video call screenConnecting screen
81
Making/Answering Video Calls XXXXX
• If an image requests the Caller ID, make the video call again sending the Caller ID.
• International video calls are available using "WORLD CALL", DoCoMo's international telephone service. →P60
• The connection cannot be established if the call is made to a non video-phone or even if the other party has a video-phone,
when the handset power is turned off or outside of the service area. If you made a call to non video-phone, the call is cancelled
and a confirmation to call again is displayed. (Checking the specifications) Select "Reconnect as Voice Call" to call again as
a voice call. However, this may not occur if the destination is ISDN synchronous 64K or PIAFS, ISDN video-phone that does
not handle 3G-324M (as of XX 2006), or wrong number was dialed. Communication charges may apply.
• If an emergency call such as 110, 119 or 118 was made from the FOMA handset via video-phone and the other party does
not have a video-phone, call again using a voice call.
• i-mode mail or Message R/F arriving during a video call is stored at the i-mode center. SMS can be received even during a
video call.
• Digital communication charges apply even if you send the alternative image.
• If the handset is not set to "DTMF ON", push signals cannot be sent by pressing dial keys during a Chara-den video call.
→P82
■When video calls are not connected
The following error messages indicate the reason:
• The message displayed may not accurately describe the actual situation depending on the other party's handset or
subscription to Network Services.
The Function Menu on the Connecting Screen/Video Call Screen
aConnecting screen (P80)/Video call screen (P80) y h
[Function] y Perform the following operations
Select Application
Calls up another function such as Phonebook. →P226
Error Message Reason
Video Call Failed
Check number, then redial.
The dialed phone number is no longer in use.
Number Busy The line is busy or using packet communication.
• Select "Reconnect as Voice Call" to switch to a voice call.
• Select "Redial Video Call" to try a video call again.
• Select "Send Message" to create and send mail with the entered phone number
as an address.
Video Call Failed
Out of the Service Area/Power Off.
Send a Message?
The other party is in a location where no signals are received or the phone is turned
off.
• Press h [Yes] to create and send SMS with the entered phone number as an
address.
Video Call Failed.
Public Mode (Drive Mode).
Create a Message?
The other party has set Public Mode (Drive Mode).
• Press h [Yes] to create and send mail with the entered phone number as an
address.
Video Call Failed
Set Caller ID to ON.
Send a Message?
The other party's phone is set to reject no Caller ID calls and you did not send the
Caller ID, or you dialed to V-Live or Visual Net. (Checking the specifications)
• Press h [Yes] to create and send mail with the entered phone number as an
address.
Video call failed Appears for the reason other than the above.
• Select "Reconnect as Voice Call" to switch to a voice call.
• Select "Redial Video Call" to try a video call again.
• Select "Send Message" to create and send mail with the entered phone number
as an address.
Default Lighting Conditions: 10 seconds (Checking the specifications) Brightness: 3
Continued on the next page
82
Making/Answering Video Calls XXXXX
Camera On/Off image
Switches the image to send between camera image and alternate image.
Call Hold/Resume
Places the call on hold/resumes the call.
Swap View
Switches between Main and Sub windows.
External View/Internal View
Switches Camera image between External camera and Internal camera.
Audio Mute/Audio Unmute
Set or cancel mute. Your voice will not be sent to the other party when mute is set.
Status Icons On/Status Icons Off
Sets ON/OFF of the display of operation icons displayed on the top of the video call screen. (Checking the specifications.)
Setup
Brightness
Adjusts the brightness of the screen during a call. →P87
My Telephone Number
Displays your phone number.
Use Bluetooth
Searches and connects to a registered Bluetooth headset or other devices. (Checking the specifications)
Dialed Calls
Displays Dialed Calls.
Received Calls
Displays Received Calls.
Other Information
Displays other information. →P242 (Checking the specifications)
DTMF On/DTMF Off
Allows/Prohibits push signals to be sent while using Chara-den during a video call.
Action List
Opens the Action list screen. →P85
Change Action
Switches between Whole action mode and Part action mode. →P85
• The Alternate image sent to the other party is either an image or Chara-den according to the settings in "Alternate image".
Mirror On or Mirror Off : Set or cancel the mirror image of the camera image. →P87
Lighting Conditions : Adjusts the white balance to the light source of the recording place. →P137 (Checking the
specifications)
Alternate image
83
Making/Answering Video Calls XXXXX
Placing a Call on Hold
You can place a call on hold or cancel on hold using an operation icon.
aVideo call screen (P80) y use s to select $★$
(Hold) y i [Hold]/i [Resume]
While the call is on hold, the hold tone and image set in "Videocall Hold"
under "Call Hold" are sent to the caller.
• You can also cancel on hold by pressing o/t during hold.
• While a call is held on hold, $★$ is displayed, and after Hold is cancelled, $★$ is displayed.
Switching to a Handsfree Call
You can set to hear the other party's voice from the speaker using an operation icon.
aVideo call screen (P80) y use s to select $★$
(Speaker) y i [Speaker On]/i [Speaker Off]
• During a Handsfree call, $★$ is displayed, and after Handsfree is cancelled, $★$ is displayed.
Receiving a Video Call
aA call arrives
The ringtone sounds and the incoming call lamp blinks.
•N/M: Adjust the ringtone volume. (Checking the specifications)
bt／o
Answer the call.
■To answer the call with sending your camera image to the caller
Press i [Use Image]. An image or Chara-den is sent to the other party according to the settings
in "Alternate Image".
cp to terminate the call
Incoming Video Call
screen
Continued on the next page
84
Making/Answering Video Calls XXXXX
• Depending on the settings in "Style", the incoming call actions such as a ringtone, vibration or screen display vary. →P106,
P108
• If the caller is saved in the Phonebook, depending on the saved settings, the incoming call actions, such as ringtone, screen
display or incoming call lamp vary.
• When Manner Mode is set, the ringtone does not sound. When Public Mode (Drive Mode) is set, the ringtone does not sound
and the incoming call lamp does not blink.
• When "Open To Answer" is set, you can answer a video call by opening the handset.
• You can set to delay the incoming call action for a call made from a party not saved in the Phonebook in "Ring Delay".
• When the Voicemail service is activated, SMS notifies you of a new message.
• Even if the Call Forwarding service is activated, an incoming video call is not forwarded if the forwarding destination is not a
3G-324M video-phone handset. Check the forwarding destination device before setting the Call forwarding.
• i-mode mail or Message R/F arriving during a video call is stored at the i-mode center. SMS can be received even during a
video call.
• A video call cannot be received with 32K. (Checking the specifications)
The Function Menu on the Incoming Video Call Screen
aIncoming Video Call screen (P83) y h [Function] y Perform
the following operations
Answer
Receives a video call.
Ignore
Reject an incoming call and hang up.
Answer Hold
Places the call on hold.
Call Forward
Transfers a video call to the specified number.
• This option is not available unless you subscribe to the Call Forwarding service and you specify a forwarding destination.
Call Forwarding
85
Making/Answering Video Calls XXXXX
Using Chara-den
You can send a character of Chara-den instead of camera image to the other party. The
movement of the character can be controlled using keys.
• Set "Alternate Image" to "Chara-den" in advance.
aPress i [Use Image] when a call arrives
• Press 0 - 9 and # to control the character.
■To view the character's action
Press h [Function] to select "Action List" to open the action
list screen. Select an action and press h [Select] to check the
action.
■To switch action mode
Press h [Function] and select "Change Action" to switch
between Whole action mode and Part action mode.
• For operations on the Action list screen or Chara-den, or details of Action modes, see "Chara-den" (P213).
• Emotions of character are expressed as a whole in Whole action mode, and using a face, arms and legs in Part action mode.
• When "DTMF On" is set, Chara-den cannot be controlled by pressing dial keys. (Checking the specifications)
Setting the Image to Send to the Other Party
Switching between Camera Image and Alternate Image
aVideo call screen (P80) y use s
to select $★$ (Image) y i
[Use image]/i [Camera On]
• You can also press t to switch between Camera image and Alternative image.
• The Alternate image sent to the other party is either an image or Chara-den according to the settings in "Alternate image" of
"Video Call Settings".
• While the Camera image is sent, $★$ is displayed, and while the Alternate image is sent, $★$ is displayed.
Video call screen
©BVIG
Chara-den
86
Making/Answering Video Calls XXXXX
Switching between the Internal and External View of the Camera
aVideo call screen (P80) y use s
to select $★$ (Camera) y i
[Ext. View]/i [Int. View]
• While the Internal camera is used, $★$ is displayed, and while the External camera is used, $★$ is displayed.
Handsfree
Setting Handsfree for Video Calls
You can set whether the other party's voice to come from the speaker using Handsfree or
from the earpiece when receiving a video call. (Checking the specifications)
ac y $★$ (Settings) y "In-Call Setup" y "Video Call Settings"
y "Handsfree" y "Speaker"/"Earpiece"
Setting a Displayed Image during a Video Call
Switching between Main and Sub windows
aVideo call screen (P80) y use s
to select $★$ (Window) y i
[Swap View]
• While switched, $★$ is displayed, and after the headset is cancelled, $★$ is displayed.
Default Speaker
Default Main window: The other party's image Sub window: Your image
87
Making/Answering Video Calls XXXXX
Changing the Camera Image to a Mirror Image
You can see the In view with the right and left inversed (Mirror On), or with the original
right and left (Mirror Off).
aVideo call screen (P80) y h
[Function] y "Setup" y "Mirror
On"/"Mirror Off"
Adjusting the white balance
You can adjust the white balance according to the light source of the shooting location.
aVideo call screen (P80) y h [Function] y "Setup" y "Lighting
Conditions"
Automatic : Adjust automatically.
Sunny : Suitable for a call outdoor and sunny.
Indoor (Home) : Suitable for a call under incandescent lighting.
Indoor (Office) : Suitable for a call under florescent lighting.
Night : Suitable for a call at night.
bSelect a setting y h [Select]
• If you select "Off", the backlight does not turn on.
Adjusting the Brightness of the Screen
The brightness can be adjusted to 6 levels. (Checking the specifications)
aVideo call screen (P80) y h [Function] y "Brightness"
The Brightness screen opens. (Checking the specifications)
bUse a to adjust the brightness y h [OK]
Videocall Hold
Setting a Video Call Hold Tone and Image
You can set a hold tone and an image that is displayed on your handset while a call is on
hold. (Checking the specifications)
Default Auto (Checking the specifications)
Default 3 (Checking the specifications)
Default Video Call Hold Tone: Japanese Video Call Hold Image: (Checking the specifications)
Continued on the next page
88
Making/Answering Video Calls XXXXX
ac y $★$ (Settings) y "In-Call Setup" y "Call Hold"
y "Videocall Hold" y Perform the following operations
Videocall Hold Tone
Videocall Hold Image
y Select a folder y c y Select an image y c
■Video Call Hold Tone
A call hold tone is played as follows:
Japanese
(Checking the specifications)
English
(Checking the specifications)
Video Call Settings
Changing the Video Call Settings
Setting Alternate image/Chara-den
You can set the alternate image sent by pressing h [Use Image] during a video call.
ac y $★$ (Settings) y "In-Call Setup" y "Videocall Settings" y
"Alternate image"
My Pictures : An image is set as the Alternative image. Go to Step 2.
Chara-den : Chara-den is set. Go to Step 2.
bSelect a folder ycy Select an image/Chara-den yc
Japanese
English
: The hold tone is set to Japanese.
: The hold tone is set to English.
Default (Checking the specifications)
89
Phonebook
Phonebooks Available on the FOMA Handset .........................................................90
Saving in the FOMA Handset Contacts ....................................................................91
Saving in the UIM Contacts........................................................................................93
Saving Contacts to the Phonebook from Received Calls or Dialed Calls .............94
Saving/Editing a Category Name<Edit Category/UIM Category>...........................95
Making a Call from the Phonebook<Search>...........................................................97
Viewing a Phonebook Entry.......................................................................................98
Deleting Contacts .....................................................................................................101
Setting Details of the Phonebook<Setup> .............................................................102
Checking the Phonebook Capacity and Utilization
<Phone Capacity/UIM Capacity> .............................................................................103
Making a Call Using Speed Dial...............................................................................103
90
Phonebook XXXXX
Phonebooks Available on the FOMA Handset
There are 2 Phonebooks: the FOMA handset Phonebook and the UIM Phonebook.
The following can be saved/set for each Contact:
• Only one per entry.
*: This is an approximate number of entries when both Phonebooks save up to the maximum number of
optional items. The available number of entries (up to 2000 entries) to be saved varies depending on the
contents.
• You can use the UIM Phonebook entries if you insert the UIM into another FOMA handset.
Item FOMA Handset Phonebook UIM Phonebook
Number of Entries Approx. 700* Up to 50
Name/Reading 1 per entry 1 per entry
Nickname 1 number Not available
Primary Number Not available (Checking the
specifications)
Only 1 number (Checking the
specifications)
Phone number Up to 7 numbers Only 1 number
Type Select from 9 types Select from 9 types
Video Number Available Not Available
Email Up to 3 addresses Only 1 address
Type Select from 5 types Not Available
URL Up to 2 URL's Not available
Address Up to 2 Not available
Type Select from 3 types Not Available
Category Select from X types Select from X types
Picture One available Not available
Ringer ID One available Not available
Chara-den One available Not available
Birthday One available Not available
Notes One available Not available
Secret Available Available (Checking the specifications)
Reject Available Not available
Speed Dial Available Not available
■Notice
• It is recommended that you write down the contents of the Phonebooks and store it in a separate location.
You can connect the handset to a PC using data link software and a FOMA USB cable (optional) and save
Phonebook entries to the PC.
• It may not be possible to copy the data you have saved on your FOMA handset to a new model depending
on the specifications. Check with a DoCoMo shop.
• DoCoMo is not responsible for lost data due to failure or repair of the FOMA handset.
Savable Item
91
Phonebook XXXXX
Saving in the FOMA Handset Contacts
ad y "[New]"
bPerform the following operations
Name
Enter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 16 full-pitch or 32 half-pitch
characters can be entered.
y Enter a name
Reading
Enter or edit when necessary. Enter using Katakana, alphanumeric or symbols. Up to 32 half-pitch characters can be
entered.
y Enter a Reading
Nickname
Enter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 50 full-/half-pitch characters can be
entered.
y Enter a Nickname
Number
Up to 26 digits can be entered.
y Enter a phone number y i [OK]
Type
Set a type for the phone number.
y Select a type y h [Select]
Video Number
Set whether the entered phone number is for a video-phone.
y "Yes"/"No"
Email
Enter using alphanumeric or symbols. Up to 50 half-pitch characters can be entered.
y Enter an Email address
Type
Set a type of an Email address.
y Select a type y h [Select]
Store To
Specify the saving destination. In this example, select "Phone".
y "Phone"/"UIM"
URL
Enter using alphanumeric or symbols. Up to 128 half-pitch characters can be entered.
y Enter a URL
Postal Address
Enter Address using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 62 full- or half-pitch
characters can be entered for "Street 1" and "Street 2". Up to 32 full- or half-pitch characters can be entered for other
items.
y Select item to enter ycy Enter Address yc
Create Contact
screen
To be inserted
Continued on the next page
92
Phonebook XXXXX
Type
Set a type for the address.
y Select a type y h [Select]
Category
y Select a category y h [Select]
Picture ID
Specify an image to be displayed on the Phonebook list or on the Incoming call screen for a call from this caller.
Ringer ID
Specify a ringtone for a call from this caller.
y Select a folder y c y Select a ringtone/melody y c
Chara-den
Specify a Chara-den to be displayed as an alternative image during a video call to this party. (Checking the specifications)
y Select a folder y c y Select a Chara-den y c
Birthday
y Use a to enter the date y h [OK]
Secret
Save an entry as secret and set "Secret Data" to "Hide" to not display the entry.
y "Yes"/"No"
Reject
Reject an incoming call from the saved phone number.
y "Yes"/"No"
Notes
Enter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 128 full-/half-pitch characters can
be entered.
y Enter a note
ci [Complete]
• Use the function menu to add a phone number, Email address, URL, or postal address field. →P94
• The default type for a phone number, email address, and postal address are "General phone", "Mobile phone" and "Home".
• The following operations are available by pressing h [Function] on the phone number entry screen:
- Select in order of "Attach Number" y "Dialed Calls"/"Received Calls"/"Phonebook" to select a phone number from a call log
or Contact to enter the phone number.
- Select "Cancel Entry" to cancel saving.
• The default for Category is "General".
• The birth date also can be entered using dial keys.
• Depending on the image size, images may take a while to open. (Checking the specifications)
• If "Secret Data" is set to "Show", the setting field of "Secret" does not appear. (Checking the specifications)
Take Picture
Select Picture
Remove Picture
: Capture an image to save. Press c to capture an image and press h [Insert] to save.
: Select a folder and press c, then select an image and press c to save.
: Deletes a saved image.
Number
Category
Birthday
Picture ID
Secret
93
Phonebook XXXXX
Saving in the UIM Contacts
aThe Create Contact screen (P91) y "Store To" y
"UIM"
bPerform the following operations
Name
Enter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 10 full-pitch or 21 half-pitch
characters can be entered. (Checking the specifications)
y Enter a name
Reading
Enter or edit when necessary. Enter using Katakana, alphanumeric or symbols. Up to 12 full-pitch or 25 half-pitch
characters can be entered. (Checking the specifications)
y Enter a Reading
Primary Number (Checking the specifications)
Enter a primary phone number.
y Enter a phone number y i [OK]
Number
Up to 26 digits can be entered to the UIM Card (green) and up to 20 digits to the UIM Card (blue).
y Enter a phone number y i [OK]
Type (Checking the specifications)
Set a type of a phone number.
y Select a type y h [Select]
Email
Enter using alphanumeric or symbols. Up to 50 half-pitch characters can be entered.
y Enter an Email address
Category
y Select a category y h [Select]
Secret (Checking the specifications)
Save an entry as secret and set "Secret Data" to "Hide" not to display the entry.
y "Yes"/"No"
ci [Complete]
Create Contact
screen
To be inserted
Continued on the next page
94
Phonebook XXXXX
• The default type for a phone number is "General Phone".(Checking the specifications)
• The following operations are available by pressing h [Function] on the phone number entry screen:
- Select in order of "Browse" y "Dialed Calls"/"Received Calls"/"Phonebook" to select a phone number from a call log or
Contact to enter the phone number.
- Select "Cancel Entry" to cancel saving.
• The default for Category is "General".
• If "Secret Data" is set to "Show", the setting field of "Secret" does not appear. (Checking the specifications)
The Function Menu on the Create Contact Screen
aThe Create Contact screen (P91) y h [Function] y Perform
the following operations
Add Number
Adds another phone number entry field.
Add E mail
Adds another Email address entry field.
Add URL
Adds a URL entry field.
Add Postal Address
Adds a postal address entry field.
Cancel
Cancels saving an entry to the Phonebook.
• If "Store To" is set to "UIM", only "Cancel" is displayed.
Saving Contacts to the Phonebook from Received
Calls or Dialed Calls
You can save entries to a Phonebook from the list or detail screens of calls, mail, SMS,
bookmarks, or screen memos that contains a phone number, mail address or URL. Also,
you can save a phone number currently being entered/displayed on the phone number
entry screen, compose mail screen, or Web site.
<Example: Saving an entry from Dialed Calls list to the FOMA handset phonebook>
aDialed Calls list screen (P56) y Select an entry y h [Function]
y "Register"
■To save from the phone number entry screen
Press i [Save].
■To save from other screens
Select an item or phone number and press h [Function], then select "Add to Phonebook".
Number
Category
Secret
95
Phonebook XXXXX
bSelect a saving method y h [Select]
• An item to overwrite appears as "Replace Email", "Replace URL" or "Replace Picture" depending on
the selected item or display under Step 1.
Create New Contact : Save a new entry to a Phonebook. Go to Step 5.
Add to Contact : Add items to an existing Phonebook entry. The phonebook selection screen
appears.
Replace Number : Overwrites an existing Phonebook entry. The phonebook selection screen
appears.
cSelect a Phonebook entry to save y c
• Go to Step 5 if you select "Add to Contact".
dSelect a phone number to overwrite y h [Select]
• Select an Email address if selecting "Overwrite Email", and a URL if selecting "Overwrite URL" in Step
2.
• If "Replace Picture" is selected in Step 2, a confirmation to overwrite appears. Press h [Yes] and
go to Step 5.
eSave/edit the Phonebook entry y i [Complete]
• For saving a Contact, see Step 2 in “Saving to the Phonebook” (P91).
• To save an item from the Barcode reader scanned result screen, select "Add to Phonebook" and select "Add to Phonebook"
on the Function menu screen. If the Scanned result screen contains a phone number, select the phone number and press c
and select "Add to Phonebook" on the Function menu screen.
• The following operations are available by pressing h [Function] on the Contact selection screen:
- Select "Search" to find a Contact. →P97
- Select the order of "View" y "Phone & UIM Card"/"UIM Card"/"Phone Contacts" to select a Contact type (phone or UIM).
- Select "Cancel" to cancel the operation.
Edit Category/UIM Category
Saving/Editing a Category Name
Category names can be saved/edited/managed for both the FOMA handset phonebook
and the UIM phonebook. Up to 10 categories can be saved in each Phonebook.
• The pre-installed "General" cannot be edited or deleted.
• Only the category names and members can be saved/edited on the UIM phonebook.
aPhonebook list (P98)/Phonebook detail screen
(P98) y h [Function] y "Manage Contacts" y
"Edit Phone Categories"/"Edit UIM Categories"
■To view a category before editing
Select a category and press c [Select]. The Category detail screen opens
and you can check a set image or ringtone, or assigned members.
Categories screen
Screen to be
inserted
Continued on the next page
96
Phonebook XXXXX
b"[New Category]"
■To edit a saved category
Select a saved Category and press h [Function], then select "Edit
Category".
cPerform the following operations
Name
Enter a category name. Up to 24 full-/half-pitch characters can be entered.
y Enter a name
Members
Select a Phonebook entry from the select a member screen.
y Select a Phonebook entry y c y i [Complete]
Picture ID
Specify an image to be displayed on the incoming call screen when a call arrives from a group member.
y Select a folder y c y Select an image y c
Ringer ID
Specify a ringtone for a call from a category member.
y Select a folder y c y Select a ringtone/melody y c
Light ID
Specify an Light ID for the incoming call lamp when a call arrives from a group member.
y Select an Light ID y c [Select]
• The following operations are available by pressing h [Function] on the Member selection screen:
- Select "Search" to find a Contact. →P97
- Select "Search All"/"Unselect All" to select or deselect all Contacts.
- Select "View Selected" to open a list of selected Contacts.
- Select "Cancel" to cancel the operation.
• If you select "(None)", this option is set to the same setting as "Lights ID".
The Function Menu on the Categories/Category Detail Screen
aCategories screen (P95)/Category detail screen (P96) y h
[Function] y Perform the following operations
Edit Category
Edit the selected category. Go to Step 3 in "Saving/Editing a Category Name" (P96).
Delete Category
Deletes the selected category.
y h [Yes]
Members
Light ID
New Category screen
Screen to be
inserted
97
Phonebook XXXXX
Search
Making a Call from the Phonebook
Searching for an Entry Using Its Reading/Alphabet/Phone Number/
Symbols/Pictogram
Enter a reading or phone number to search for a Phonebook entry. You can also enter
alphabet characters, symbols or pictographs to search for an entry.
aPhonebook list (P98) y h [Function] y "Search" y Perform
the following operations
Reading
Enter a part of the reading. (Checking the specifications)
y Enter a part of the Reading y c
Alphabet
Enter alphabet characters contained in any item of the entry. (Checking the specifications)
y Enter alphabet characters y c
Phone Number
Enter a part of the phone number. (Checking the specifications)
y Enter a part of the phone number y c
Symbol
Enter a symbol contained in any item of the entry. (Checking the specifications)
y Select a symbol y h [Confirm] y c
E-Moji
Enter a pictograph contained in any item of the entry. (Checking the specifications)
y Select a pictograph y h [Confirm] y c (Checking the specifications)
bSelect a Phonebook entry y o
The phone number entry screen opens with the phone number entered.
co
■To make a video call
Press t.
Filter by Email
You can display only phonebook entries with Email saved on the Phonebook list to find
an entry.
aPhonebook list (P98) y h [Function] y "Filter by" y "Email"
The Phonebook list screen of only entries with Email opens.
bSelect a Phonebook entry ycy Select the phone number
yo
The phone number entry screen opens with the phone number entered.
co
Continued on the next page
98
Phonebook XXXXX
■To make a video call
Press t.
• You can also press */# several times on the Phonebook list.
• Press o on the Phonebook list, or select an email address on the Phonebook detail screen and press o, to create and
send email with the selected email address as a destination.
Filter by Category
You can display only phonebook entries saved in a specified category to find an entry.
aPhonebook list (P98) y h [Function] y "Filter by" y
"Category"
bSelect a category y h [Select]
The Phonebook list with only members of the specified category opens.
cSelect a Phonebook entry y o
The phone number entry screen opens with the phone number entered.
do
■To make a video call
Press t.
• You can also press */# several times on the Phonebook list.
Viewing a Phonebook Entry
• You can change the display format of the Phonebook list from "Setup" on the Function menu. →P102
ad
aA phone number for video calls
bThe first phone number and type
If no phone number is saved, saved mail address
and type icon, URL and URL icon, or postal address
and type icon will be displayed.
cAppears if more than one item is saved
Press s to switch the displayed item.
bSelect a Contact y c
Phonebook list
screen (List)
Phonebook list
screen (Picture)
a
c
b
Phonebook detail
screen
99
Phonebook XXXXX
■Operations from the Phonebook list
Select a Phonebook entry and press o/t to make a call, send mail or visit a site. Perform operations as follows:
Contacts: The phone number entry screen opens with the phone number entered.
Email Address: The send message screen opens with the address entered.
URL: Connects to a URL.
• If a Phonebook entry is displayed with $★$, use s to change the display
■Operations from the Phonebook detail screen
Select a phone number and press o/t. The phone number entry screen opens with the phone number entered. Select
an Email or URL and press o/t to make a video call to Internet video call. (Checking the specifications)
Select a phone number, Email, or URL and press c to open a screen of the following items:
"Call": Makes a voice call to the selected phone number.
"Video Call": Makes a video call to the selected phone number/mail address.
"Send Message": Create and send a new message to the selected phone number/Email as an address. →P172
"Connect": Connects to the selected URL.
"Store as Bookmark": Save the selected URL in Bookmarks.
The Function Menu on the Phonebook List/Phonebook Detail Screen
aPhonebook list (P98)/Phonebook detail screen (P98) y h
[Function] y Perform the following operations
Search
Search for a Phonebook entry. →P97
Send Message
Create and send a message with the phone number or Email of the currently selected/displayed entry as an address.
→P172
Caller ID
Sets send/hide Caller ID to the phone number of the entry currently selected/displayed.
y "Show ID"/"Hide ID"
Multi Number
Makes a call by selecting an additional phone number of the currently selected/displayed entry. →P251
Browse URL
Connects to the URL saved in the currently displayed/selected Contact.
Create New
Go to Step 2 in "Saving in Phone Contacts" (P91)/Step 1 "Saving in UIM Contacts" (P93).
Edit Contact
Edit the selected/displayed Contact. Go to Step 2 in "Saving in Phone Contacts" (P91)/Step 1 "Saving in UIM Contacts"
(P93).
Add to Speed Dial
Save the phone number of the currently selected/displayed entry as a speed dial.
y Select a dial number y h [Select]
Remove Speed Dial
Cancels the phone number of the currently selected/displayed entry as a speed dial.
View
Select a type of Phonebook (Phone or UIM) to be displayed on the Phonebook list.
Default View:(Checking the specifications)
Phone & UIM Card
UIM Card
Phone Contacts
: Displays all Phonebook entries.
: Displays entries only in the UIM phonebook.
: Displays entries only in the Handset phonebook.
Continued on the next page
100
Phonebook XXXXX
Filter by
Sets the displaying method of the Phonebook list.
Insert in Message
Create and send a message with the name and phone number or Email of the currently selected/displayed entry as an
address. →P172
Send Contact
Sends the currently selected/displayed entry as a vCard file using Bluetooth. →P239
Delete Number
Deletes a selected phone number.
Delete Email
Deletes a selected Email address.
Delete URL
Deletes a selected URL.
Delete Postal Address
Deletes a selected postal address.
Delete Contact
Deletes the selected/displayed entry.
Print
Prints the currently selected/displayed entry using a Bluetooth printer. →P240
Select Multiple to
Select more than one Phonebook entry and perform various operations. For steps to select multiple entries, see "Selecting
and Deleting More than One Phonebook Entry" (P101).
Manage Contacts
Copy to UIM Card
Copies the handset contacts to the UIM phonebook.
y h [Yes]
Copy to Phone
Copies the UIM contacts to the handset phonebook.
Edit Before Call
The phone number entry screen opens with the phone number of the currently selected/displayed entry. →P54
Setup
Set a display format (View by) of the Phonebook list or specify the default storage location when you save a Contact.
→P102
All Contacts
All Phone Contacts
All UIM Contacts
Email
Category
: Displays all Phonebook entries. This option appears only when "View" is set to "Phone & UIM".
: Displays all entries in the Handset phonebook. This option appears only when "View" is set to
"Phone Contacts".
: Displays all entries in the UIM phonebook. This option appears only when "View" is set to "UIM".
: Displays only entries with an Email address. →P97
: Displays entries only in the specified category. →P98
Send Message
Delete
Copy to UIM Card
Copy UIM to Phone
Print
: Specify more than one mail destination. Selecting destinations opens the Compose Message
screen with addresses entered.
: Deletes multiple phonebook entries at once.
: Copies multiple phone contacts to the UIM phonebook at once.
: Copies multiple UIM contacts to the Handset phonebook at once.
: Prints multiple phonebook entries to a Bluetooth printer at once. →P240
Speed Dial
Edit Categories
Edit UIM Categories
Phone Capacity
UIM Capacity
: Check, save or delete the Speed dial. →P103
: Sets categories to the Handset phonebook. →P95
: Sets categories to the UIM phonebook. →P95
: Checks the available memory on the handset phonebook. →P103
: Checks the available memory on the UIM phonebook. →P103
101
Phonebook XXXXX
Secret Code
Save the secret code.
Enter the unlock code y Enter the secret code y h [Save]
Send Tones
Sends the phone number of the currently displayed/selected entry as push signals (DTMF). (Checking the specifications)
• If "UIM" is selected, $★$ is displayed on the Phonebook list.
• If you have saved more than one phone number, email address, URL or postal address and delete the first one, the second
and subsequent ones will be moved up and saved.
• If you select a phone number or email address saved with the secret code and display the function menu on the Phonebook
detail screen, "
＊
" appears next to the item name of the "Secret code".
Deleting Contacts
Deleting One Contact
aPhonebook list (P98)/Phonebook detail screen (P98) y h
[Function] y "Delete Contact"
Deletes the selected/displayed entry.
• For deleting from the Phonebook list, select an entry then delete it.
Select and Delete More Than One Contact at a Time.
• If either of the handset phonebook or UIM phonebook is displayed, entries are deleted from the displayed
Phonebook.
aPhonebook list (P98) y h [Function] y "Select
Multiple to" y "Delete"
bSelect a Phonebook entry y c y i [Complete]
• Select all Phonebook entries and press i [Complete].
ch [Yes]
View
Delete phone number/Delete email address/Delete URL/Delete postal address
Secret code
Multiple selection
screen
102
Phonebook XXXXX
The Function Menu on the Multiple Selection Screen
aMultiple selection screen (P101) y h [Function] y Perform
the following operations
Search
Search for a Phonebook entry. →P96
Select All
Selects all Phonebook entries.
Unselect All
Cancels the selection of all.
View Selected
A list of selected Phonebook entries opens.
View by
Set a view of the Phonebook list.
y "Picture"/"List"
Cancel
Cancels the operation.
• When "View" is set to "UIM Card", select "1-Line" or "2-Line".
Setup
Setting Details of the Phonebook
You can set a display format (View by) of the Phonebook list or specify the default
storage location when you save a Contact.
• When "View" is set to "UIM Card", the Display format is set to "View By 1-Line" by default.
aPhonebook list (P98)/Phonebook detail screen (P98) y h
[Function] y "Setup" y Perform the following operations
View by
y "Picture"/"List"
Default Storage
Set the saving destination displayed in "Store To" in advance when the Create Contact screen opens.
y "Phone"/"UIM Card" yh [Yes]
• If "Phone" is selected, setup of default storage completes.
• When "View" is set to "UIM Card", select "1-Line" or "2-Line".
Default View by: (Checking the specifications)
View by
Default View by: List Default Storage: Phone
View by
103
Phonebook XXXXX
Phone Capacity/UIM Capacity
Checking the Phonebook Capacity and Utilization
You can check the available memory space on the phone and the UIM.
aPhonebook list (P98)/Phonebook detail screen (P98) y h
[Function] y "Manage Contacts" y "Phone Capacity"/"UIM
Capacity"
Making a Call Using Speed Dial
You can quickly make a call only by pressing a dial key from 1 to 7 to dial the phone
number assigned to the key.
• You need to assign a phone number to a dial key in advance.
aPress a dial key from 1 to 7 (for 1+ seconds)
The corresponding speed dial phone number is dialed.
■To View the assigned phone numbers
On the Phonebook detail screen (P98), press h [Function] y select "Manage Contacts" y "Speed Dial". The Speed Dial
Entries screen (P103) opens and you can check the phone number assigned to each dial key.
Assigning a Phone Number to a Dial Key
You can assign a phone number from a contact to make Speed dial calls.
• A contact that does not have a phone number cannot be saved in Speed dial.
aPhonebook list (P98)/Phonebook detail screen
(P98) y h [Function] y "Add to Speed Dial"
• Select a Contact before performing steps on the Phonebook list.
bSelect a dial number y h [Select] (Checking the
specifications)
■If a dial number already saved is selected
The confirmation to overwrite appears. Press h [Yes] to overwrite.
The Function Menu on the Speed Dial Entries Screen
aSpeed Dial Entries screen (P103) y h [Function] y Perform
the following operations
Speed Dial Entries
screen
Screen to be
inserted
Continued on the next page
104
Phonebook XXXXX
Assign Contact
Assign a phone number to a speed dial number.
y Select a Contact y h [Select]
Change Contact
Change the assigned phone number.
y Select a Contact y h [Select]
Remove Contact
Cancels the phone number assignment.
Clear All
Deletes all assigned phone numbers.
y h [Yes]
Specifying a Contact to Use as a Speed Dial
(Checking the specifications)
ac y $★$ (Settings) y "General Settings" y "Speed Dial" y
"Phone Memory"
Default Phone Memory
105
Tone/Screen/Light Settings
Tone Settings
Selecting Ring Styles<Style> ..........................................................................106
Changing the Ringer ID and Volume...............................................................107
Vibrating Instead of Ringtone or Alarm<Vibrate> .........................................108
Setting a Push Tone Signal (DTMF)<DTMF> ..................................................109
Sounding a Ringtone Only from the Headset<Ringer Function>.................110
Muting Handset Tones<Manner Mode> ..........................................................110
Changing Manner Mode<Mode> .....................................................................110
Screen/Light Settings
Changing the Display of the Stand-by Display<Wallpaper> .........................112
Changing the Appearance of the Main Menu<Main Menu> ..........................113
Setting a Skin<Skin> ........................................................................................113
Displaying a Wake-up Message<Greeting>....................................................114
Launching the Screen Saver<Screen Saver>.................................................114
Setting Ring Lights<Ring Lights>...................................................................114
Setting Event Lights<Event Lights> ...............................................................115
Displaying Date & Time on the Talking Screen<Date and Time> .................115
Setting the Clock Format<Home Screen> ......................................................115
Setting Time Duration before Display is Turned Off<Display Timeout>......116
Setting the Backlight Lighting Duration<Backlight>.....................................116
Setting Scrolling of the Screen<Scroll> .........................................................116
Setting the Text Marquee Speed<Text Marquee>...........................................117
Adjusting the Display Brightness<Brightness> ............................................117
106
Tone/Screen/Light Settings XXXXX
Style
Selecting Ring Styles
By changing the Sound Profile, you can change the ringtone, alarm tone, ring volume and
keypad sound volume at once.
• You can change the pre-set tones or volumes. →P107
ac y $★$ (Settings) y "Sound Profiles" y "Style"
b"Loud"/"Soft"/"Vibe&Ring"
■To not Sound
Select "Silent".
• After a Profile is selected, one of the following icons appears at the top of the screen:
$★$ (Loud) $★$ (Soft) $★$ (Vibe&Ring) $★$ (Silent)
• When "Vibe&Ring" is selected, the handset vibrates at the same time as the ringer ID sounds.
■Settings for each profile
The following table shows the pre-set function: (Checking the specifications)
Default Loud
Item Style
Loud Soft Vibe&Ring Silent
Ring Volume 7 4 7 −
Calls
(Checking the specifications) (Checking the specifications) (Checking the specifications)
−
Messages
(Checking the specifications) (Checking the specifications) (Checking the specifications)
−
Ans Mach
(Checking the specifications) (Checking the specifications) (Checking the specifications)
−
Calendar Alarm
(Checking the specifications) (Checking the specifications) (Checking the specifications)
Silent
Data Calls
(Checking the specifications) (Checking the specifications) (Checking the specifications)
−
Ringer IDs On On On −
Key Volume 2 2 7 −
Reminders Beep Beep Beep Vibrate
Style screen
107
Tone/Screen/Light Settings XXXXX
Changing the Ringer ID and Volume
You can change various tones set to Profiles. You can also set the Ringer ID saved for a
Contact to silent.
• Set "Style" to "Loud"/"Soft"/"Vibe&Ring"/"Silent" in advance.
• When "Style" is set to "Silent", you can change only "Calendar Alarm" and "Reminders".
ac y $★$ (Settings) y "Sound Profiles" y
"(Style name) Detail"
• The Style name set under "Style" is displayed in "(Style)".
bPerform the following operations
Ring Volume
The volume can be adjusted in eight levels from 0 to 7.
y Use j to adjust the volume yh [OK]
Calls
Change the ringer ID for incoming calls. Go to Step 3.
Messages
Change the ringer ID for incoming mail. Go to Step 3.
Ans Mach
Change the ringer ID that sounds when a message is recorded in Voicemail. Go to Step 3.
Calendar Alarm
Change the alarm tone that sounds at a Datebook alarm time. Go to Step 3.
Data Calls
Change the ringer ID for incoming data. Go to Step 3.
Set whether to sound the ringer ID saved for a contact. (Checking the specifications)
y "On"/"Off"
Ringer IDs
Set whether to sound the ringtone registered in the Phonebook entry. (Checking the specifications)
y "On"/"Off"
Key Volume
Adjust the volume of the keypad sound. The volume can be adjusted in 8 levels from 0 to 7.
y Use j to adjust the volume y h [OK]
Reminders
(Checking the specifications)
cSelect a folder y c y Select a ringtone or melody y c
Default See "Settings for Each Profile" (P106)
Beep
Vibrate
Off
: Sounds the beep tone.
: Vibrates the handset.
: No action is taken.
Style Detail screen
(For Loud)
To be inserted
Continued on the next page
108
Tone/Screen/Light Settings XXXXX
• The ring volume or keypad sound volume can also be entered using dial keys.
• If you set a video/i-motion movie as a ringtone, the graphics and sound are played when a call/message arrives (Chaku-
motion).
• Some i-motion movies, such as an i-motion movie without audio, cannot be set as the ringtone. (Checking the specifications)
• If an i-motion movie with a video and sound is set as the ringtone, even if the caller is saved in the Phonebook, the Picture ID
is not displayed and the i-motion movie with sound is played. However, if the i-motion movie has only sound, the Picture ID is
displayed. (Checking the specifications)
• When "Style" is set to "Silent", "Beep" cannot be set.
■Ringtones, Melodies and Alarm Tones (Pre-installed)
Vibrate
Vibrating Instead of Ringtone or Alarm
You can set the handset to vibrate when a call or mail arrives or at a Datebook alarm time
instead of a ringer ID or alarm tone.
• You can change the pre-set vibration pattern. →P109
ac y $★$ (Settings) y "Sound Profiles" y "Style"
b"Vibrate"
•$★$ appears at the top of the screen when Vibration is set.
Call Ringtone
Reminders
Ambient Urban Funky break
Nocturne Bossa Wa
Flowers Interlude Space ping pong
Soaring High Hellomoto Moving up
Solar Midnight Katana
Beats Ringer Hello
Vapor Alert Cyberspace
Fusion Bells Watermark
Ultra Violet Standard Got a mail
Grooving Triads Morning wave
Digital Provincial Big Mama
Default Style: Loud
Style screen
109
Tone/Screen/Light Settings XXXXX
Setting a Vibration Pattern
You can set a vibration pattern for events such as when a call or mail arrives, or at a
Datebook alarm time.
• Set "Style" to "Vibrate" in advance.
aSound/Vibration setting screen (P106) y "Vibrate Detail"
Calls : Change the vibration pattern for an incoming call.
Message Alert : Change the vibration pattern for incoming mail.
Voicemail : Change the vibration pattern when a message is recorded in Voicemail.
Calendar Alarm : Change the vibration pattern for a Datebook alarm time.
Data Calls : Change the vibration pattern for incoming data.
Reminders : (Checking the specifications)
bSelect an event y h [Change]
Silent : The handset does not vibrate.
Vibe Dash : (Checking the specifications)
Vibe Dot : (Checking the specifications)
Vibe Dot Dash : (Checking the specifications)
Vibe Dot Dash : (Checking the specifications)
Vibe Pulse : (Checking the specifications)
cSelect a vibration pattern y h [Select]
• When "Reminders" is selected, select "Vibrate" or "Off", then press h [Select].
• When a vibration pattern is selected, the handset vibrates in the selected pattern.
DTMF
Setting a Push Tone Signal (DTMF)
You can change the length of a push signal (DTMF). You can also set it not to sound.
ac y $★$ (Settings) y "General Settings" y "DTMF" y Select
length y h [Select]
• When "Off" is selected, push signals (DTMF) will not be sent even if a dial key is pressed.
Default Calls: Vibe Dot Message Alert: Vibe Dot Voicemail: Vibe Pulse
Calendar Alarm: Vibe Dot Dash Data Calls: Vibe Dot Dash
Default Long
110
Tone/Screen/Light Settings XXXXX
Ringer Function
Sounding a Ringtone Only from the Headset
You can set the device to sound a ringer ID while the miniUSB stereo headset M01
(optional) is connected to the handset.
ac y $★$ (Settings) y "Headset" y "Ringer Function" y Select
a device y h [Select]
Speaker Only : The ringtone sounds only from the speaker.
Headset Only : The ringtone sounds only from the headset.
Headset & Speaker : The ringtone sounds from both speaker and headset.
• Do not tie the cable of a miniUSB stereo headset M01 (optional) around the handset.
Manner Mode
Muting Handset Tones
Turn off the tones that sound from the handset so as not to disturb others.
• There are 3 types of Manner Mode: "Silent", "Manner Mode" and "Original Manner Mode". Select the one
that fits your usage. →P110
a# (for 1+ seconds)
■To cancel Manner mode
Press # (1+ seconds) on the wallpaper screen.
•$★$ appears at the top of the screen when Manner mode is set.
• A notification appears when you try to play a melody, video clip with sounds, or i-motion while Manner mode is set. (Checking
the specifications)
• Even when Manner mode is set, the camera shutter tone sounds. (Checking the specifications)
Mode
Changing Manner Mode
Select actions of Manner mode from "Silent", "Manner mode" or "Original manner mode".
• You can change the actions of Original manner mode. →P111
ac y $★$ (Settings) y "Personalize" y "Manner Mode" y
Select a mode y h [Select]
Default Headset & Speaker
Default Silent
111
Tone/Screen/Light Settings XXXXX
■Action in Each Mode
(Checking the specifications)
*1: Indicates the items in "Original Manner Detail".
*2: The handset vibrates for incoming calls, chat mail or mail, when a message is recorded in Voicemail, at an Alarm or
Datebook alarm time, and for incoming data.
Setting Actions in Original Manner Mode
You can change the actions of Original manner mode.
ac y $★$ (Settings) y "Personalize" y "Manner
Mode" y "Original Manner Detail"
bPerform the following operations
Ring Volume
The volume can be adjusted in 8 levels from 0 to 7.
y Use j to adjust the volume y h [OK]
Silent Manner Mode Original Manner Mode*1
Ring Volume (for Calls, Text
Message, Voicemail or Data
Calls)
(Checking the specifications) (Checking the specifications) In accord with the settings in
"Ring Volume"
Vibrate*2 (Checking the specifications) (Checking the specifications) In accord with the settings in
"Calls", "Chat mail",
"Messages", "Voicemail",
"Alarm", or "Data Calls"
Alarm Volume (Checking the specifications) (Checking the specifications) In accord with the settings in
"Ring Volume"
Datebook Alarm Volume (Checking the specifications) (Checking the specifications) In accord with the settings in
"Ring Volume"
Reminders (Checking the specifications) (Checking the specifications) In accord with the settings in
"Reminders"
Ringer IDs (Checking the specifications) (Checking the specifications) In accord with the settings in
"Ringer ID"
Response Hold Volume (Checking the specifications) (Checking the specifications) (Checking the specifications)
Call Hold Volume (Checking the specifications) (Checking the specifications) (Checking the specifications)
Key Volume (Checking the specifications) (Checking the specifications) In accord with the settings in
"Key Volume"
Low Battery Alert (Checking the specifications) (Checking the specifications) In accord with the settings in
"Low Battery Alert"
Microphone Sensitivity (Checking the specifications) (Checking the specifications) In accord with the settings in
"Microphone Sensitivity"
Default
Ring Volume: 0 Calls: (Checking the specifications) Chat mail: (Checking the specifications)
Text Messages: (Checking the specifications) Voicemail: (Checking the specifications)
Alarms: (Checking the specifications) Data Calls: (Checking the specifications)
Ringer IDs: Off Key Volume: 0 Reminders: Beep Low Battery Alert: Off Microphone Sensitivity: On
Original Manner
Detail screen
Screen to be
inserted
Continued on the next page
112
Tone/Screen/Light Settings XXXXX
Calls
Change the vibration pattern for an incoming call. Go to Step 3. (Checking the specifications)
Chat mail
Change the vibration pattern for incoming chat-mail. Go to Step 3. (Checking the specifications)
Message Alert
Change the vibration pattern for incoming mail. Go to Step 3. (Checking the specifications)
Voicemail
Change the vibration pattern when a message is recorded in Voicemail. Go to Step 3. (Checking the specifications)
Calendar Alarm
Change the vibration pattern for an Alarm or Datebook alarm time. Go to Step 3. (Checking the specifications)
Data Calls
Change the vibration pattern for incoming data. Go to Step 3. (Checking the specifications)
Ringer IDs
Set whether to sound the ringtone saved in a Phonebook entry. (Checking the specifications)
y "On"/"Off"
Key Volume
Adjust the volume of the keypad sound. The volume can be adjusted in 8 levels from 0 to 7.
y Use j to adjust the volume y h [OK]
Reminders
(Checking the specifications)
Low Battery Alert
Set whether to sound the Low battery alarm.
y "On"/"Off"
Mic Sensitivity
Set whether to increase the microphone sensitivity so that the other party can hear a low voice better.
y "On"/"Off"
cSelect a vibration pattern y h [Select] (Checking the
specifications)
• Vibration patterns →P109
• The ring volume or keypad sound volume can also be entered using dial keys.
Wallpaper
Changing the Display of the Stand-by Display
ac y $★$ (Settings) y "Personalize" y"Wallpaper" y Perform
the following operations
Picture
Change the image to be displayed on the Standby screen.
y Select a folder y c y Select an image y c
Beep
Vibrate
Off
: Sounds the beep tone.
: Vibrates the handset.
: No action is taken.
Default Picture: (Checking the specifications) Layout: Fit-to-screen Calendar: Off
113
Tone/Screen/Light Settings XXXXX
Layout
Adjust the position of the image set in "Picture".
Calendar
Set whether to display a Calendar on the wallpaper screen.
y "On"/"Off"
• For pre-installed wallpaper, see "Default Settings". →P288
• When an i-appli standby screen is set, the i-appli standby screen takes precedence. →P196
• If an animation GIF is set for a standby screen, the following operations are available while the standby screen is displayed:
(Checking the specifications) (Checking the specifications)
Main Menu
Changing the Appearance of the Main Menu
You can change the Main menu items to be displayed as Icons or in a list. You an also
change the order of items.
ac y $★$ (Settings) y "Personalize" y "Main Menu" y Perform
the following operations
View
y "Icons"/"List"
Reorder
y Use j to select a function y h [Grab] y Use j to move the function to a new position y h [Insert] y
i [Complete]
Skin
Setting a Skin
You can change the screen design of the FOMA handset. (Checking the specifications)
ac y $★$ (Settings) y "Personalize" y "Skin" y Select a skin
y h [Select]
Center
Tile
Fit-to-screen
: Places the image at the center of the screen.
: Tiles the image.
: Enlarges/shrinks the image to fit to the screen.
Pictures
Default View: Icons
Default Moto
Displayed as listDisplayed as icons
114
Tone/Screen/Light Settings XXXXX
Greeting
Displaying a Wake-up Message
You can display a greeting after the Wake-up screen opens when you turn the handset
power on.
ac y $★$ (Settings) y "Personalize" y "Greeting" y Enter a
message
• Up to 32 full-/half-pitch characters can be entered.
Screen Saver
Launching the Screen Saver
You can set to launch a screen saver if no operation is performed for a specific time.
ac y $★$ (Settings) y "Personalize" y "Screen Saver" y
Perform the following operations
Picture
You can change the screen saver image.
Select a folder y c y Select an image y c
Delay
Sets the duration before the screen saver launches.
y Select a time y h [Select]
• If you select "Off", the screen saver does not start.
• The screen saver does not start if the set time is shorter than the time set in "Display Timeout". (Checking the specifications)
Ring Lights
Setting Ring Lights
You can set the incoming call lamp to blink when a call or mail arrives. (Checking the
specifications)
ac y $★$ (Settings) y "Sound Profiles" y "Ring Lights" y
"(None)"/"<Lights>"
Default Picture: (Checking the specifications) Delay: 1 minute
Default None
115
Tone/Screen/Light Settings XXXXX
Event Lights
Setting Event Lights
You can set the incoming call lamp to blink at an alarm or Datebook alarm time.
(Checking the specifications)
ac y $★$ (Settings) y "Sound Profiles" y "Event Lights" y
"On"/"Off"
Date and Time
Displaying Date & Time on the Talking Screen
You can set the date and time in Talking screen for voice calls.
ac y $★$ (Settings) y "In-Call Setup" y "Date and Time" y
"Show Date"/"Show Time" y "On"/"Off"
Home Screen
Setting the Clock Format
You can change the appearance of the clock, or position of the clock or date on the
Standby screen. You can also set to not display the clock or date.
ac y $★$ (Settings) y "Personalize" y "Home Screen" y
Perform the following operations
Clock
Date
Set whether to display the date.
y "On"/"Off"
Layout
Set the position of the clock and date.
y "Left Justified"/"Centered"
• "Analog" cannot be set when "Calendar" for "Wallpaper" is set to "On".
Default On
Default Show Date: On Show Time: On
Default Clock: Digital Date: On Layout: Center
Digital
Analog
Off
: A digital clock is displayed.
: An analog clock is displayed.
: A clock is not displayed.
Clock
116
Tone/Screen/Light Settings XXXXX
Display Timeout
Setting Time Duration before Display is Turned Off
You can set to turn off the display to save power if no operation is performed during the
set time.
ac y $★$ (Settings) y "General Settings" y "Display Timeout"
y Select a time duration before the display is turned off y h
[Select]
• The display does not turn off if you select "Off".
Backlight
Setting the Backlight Lighting Duration
You can set to turn off the display lighting to save power if no operation is performed
during the set time.
ac y $★$ (Settings) y "General Settings" y "Backlight" y
Select time y h [Select]
• The display remains lit if you select "Continuous".
• Even if you set this option to "Continuous", the display is turned off after the time set in "Display Timeout" elapses. (Checking
the specifications)
Scroll
Setting Scrolling of the Screen
You can set the movement of the cursor on the screen with listed items such as Function
menu.
ac y $★$ (Settings) y "General Settings" y "Scroll"
Up/Down : The cursor does not move when u is pressed if the cursor is at the top item, or when
d is pressed if the cursor is at the bottom item.
Wrap Around : Moves the cursor to the bottom or top when j is pressed if the cursor is at the top or
bottom item.
bSelect a scrolling method y h [Select]
Default 2 minutes
Default 10 seconds
Default Wrap Around
117
Tone/Screen/Light Settings XXXXX
Text Marquee
Setting the Text Marquee Speed
The FOMA handset scrolls a partially hidden name such as Function menu item. You can
set the scrolling speed.
ac y $★$ (Settings) y "General Settings" y "Text Marquee"
y Select a speed y h [Change]
• When an item is selected, the item name is scrolled at the selected speed.
• The item name does not scroll when it is highlighted if you select "Off".
Brightness
Adjusting the Display Brightness
You can set the brightness of the screen in 6 levels.
ac y $★$ (Settings) y "General Settings" y "Brightness" y
Use a to adjust the brightness y h [OK]
Default Slow
Default 3