| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 711776 |
| Application ID | snkoYaiILivKengdVu51sA== |
| Document Description | Exhibit 8B Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 190.69kB (2383641 bits) |
| Date Submitted | 2006-10-03 00:00:00 |
| Date Available | 2006-10-03 00:00:00 |
| Creation Date | 2006-06-11 18:30:06 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2006-10-02 14:39:45 |
| Document Title | Scorpius_E.book |
| Document Creator | FrameMaker 7.0 |
| Document Author: | 8E528CFB8F9F8E6A |
Making/Answering Calls
Making Calls
Making Calls........................................................................................................54
Calling the Same Party Again ...................................................56
Redialing Automatically .............................................................58
Showing/Hiding Caller ID for Each Call<186/184> ...........................................58
Sending Push Signals Quickly
Making International Calls.....................................................60
Making a Call by Specifying a Sub Address..........................63
Warning with Display and Alarm when a Set Period Elapses during a Call
....................................................................................................64
Talking Using Handsfree....................................................................................64
Talking in a Car, Hands Free.............................................64
Talking via Bluetooth..........................................................................................65
Answering a Call
Receiving a Call ..................................................................................................65
Answering a Call by Pressing a Dial Key......................................67
Answering a Call by Opening the Handset.......................67
Using Received Calls............................................................67
Adjusting the Other Party's Volume during a Call...........................................68
Adjusting the Ringtone Volume ........................................................................69
Saving Power Consumption during a Call ...........................69
52
When You are/were Unable to Answer Calls
Placing a Call on Hold When You Cannot Answer the Call ............................69
Setting the Response Hold Tone ...............................70
Placing a Call on Hold ........................................................................................71
Setting the Answer Hold Tone and Image ..............................71
Using Public Mode (Drive Mode).......................72
Using Public Mode (Power Off) ............................73
Checking Missed Calls .......................................................................................74
Recording of Voice/Video-clip Message from a Caller when You Cannot
Answer a Call ................................................................75
Playing/Deleting Record Message ....................................................................77
53
Making Calls
Making/Answering Calls
Enter a phone number
• Enter up to 80 digits. If you enter more than 27 digits, only the last 26 digits are
displayed.
• Start from the area code even for a local call.
• i [Register] : Go to Step 2 (P95) in "Saving Contacts to Phonebook from
Received Calls or Dialed Calls".
Phone number
entry screen
■ To make a call to a general phone
Area Code − City Code − Phone Number
XXXXX
■ To make a call to a mobile phone
090−XXXX−XXXX/080−XXXX−XXXX
■ To make a call to a PHS
070−XXXX−XXXX
o/c
Start talking when the other party answers.
• i [Swap]: Calls up another function such as Phonebook. →P226
• 0 to 9: Sends push signals (DTMF).
p to terminate the call
Talking screen
• If you hear the Caller ID Display Request service voice prompt, make a call again sending the Caller ID.
■ To correct an entered phone number
To delete an entered digit, use a to move the cursor to the right of the digit and press C.
To add a digit, use a to move the cursor to the position and enter the digit with the dial keys.
■ Screen display during dialing
The other party's name appears if the party is saved in the Phonebook. However, when a call is made to a party that has
been saved as secret by setting "Secret Data" to "Hide", the phone number is displayed. (Checking the specifications)
The Function Menu on the Phone Number Entry Screen
Phone number entry screen (P54) yh [Function] y Perform
the following operations
Attach Number
Enter the phone number referring to the phonebook or Dialed/Received Calls.
Phonebook
: Select the phonebook entry and press h [Select].
Dialed Calls
: Select a history and press h [Select].
Received Calls : Select a history and press h [Select].
Insert
Enters "p", "w", or "n" at the cursor location. →P59
Caller ID
Makes a call after setting to show/hide the Caller ID. →P58
54
Video Call
Makes a video call to the entered phone number.
The entered phone number becomes the destination.
Compose and send a mail. →P172
Multi Number
Select a number to use for Caller ID when making calls. →P251
Add Intl Access No.
Adds an international access number at the beginning of the entered phone number. →P61
Add Country Code
Adds a country code at the beginning of the entered phone number. →P270
Making/Answering Calls
Send Message
Insert
XXXXX
(Checking the specifications)
Editing Function
Uses the edit functions. →P261
Cancel Entry
Cancels storing. (Checking the specifications)
Attach Number
• Selecting "New Call" from the function menu during a call will bring up the phone number entry screen with "Browse" displayed.
(Checking the specifications)
Video Call
• Selecting "New Call" from the function menu during a call to make a video call, will display a confirmation whether to dial after
disconnecting the current call. Pressing h [Yes] terminates the current call and makes a video call to the newly dialed
phone number.
The Function Menu on the Talking Screen
Talking screen (P54) yh [Function] y Perform the following
operations
Mute
Turns off the sound.
Unmute
Cancels Mute.
Spkrphone On
Switches the sound source to the speaker to perform a Handsfree call.
Spkrphone Off
Cancels the Handsfree call.
My Personal Info
Displays your phone number.
Hold
Places the call on hold.
Use Bluetooth
• Searches and connects to a registered Bluetooth headset, etc. (Checking the specifications)
New Call
Places the active call on hold and makes another call. →P248
Continued on the next page
55
Dialed Calls
Opens the Dialed Calls list.
Making/Answering Calls
Received Calls
Opens the Received Calls list.
Other Information
Displays other information. →P242 (Checking the specifications)
Dialed Calls
Calling the Same Party Again
XXXXX
Up to XX entries can be saved in the Dialed Calls for both voice calls and video calls. A
phone number, dialed date and time, ringing duration, and show/hide Caller ID are saved
in the Dialed Calls.
• If there are more than XX entries, the oldest entries will be overwritten first.
• Calling the same phone number overwrites the entry of the latest called date and time.
• The other party's name appears if the party is saved in the Phonebook.
Dialed Calls list
Select an entry yc
Dialed Calls detail
screen
o/t
The phone number entry screen opens with the phone number entered.
o/c
• Press c to make a call in the same way (voice/video call) as the entry.
■ To make a video call
Press t.
• You can also make a call by selecting an entry on the Dialed Calls list and performing Step 3 and subsequent steps.
• If the call was made using an additional number of Multi Number, the icon registered to the number is displayed. (Checking
the specifications)
• Calls made to a party saved as secret while "Secret Data" is set to "Hide", or a party whose calls are set to be rejected in
Phonebook are displayed as "Private" on the Dialed Calls list or Dial Calls detail screen.
• Calls made to parties who are not saved in the Phonebook are displayed as "Name unknown" on the Dialed Calls detail screen.
56
■ Icons on the Dialed Calls list (Checking the specifications)
$★$: Number2
The Function Menu on the Dialed Calls List and Dialed Calls Detail Screen
Dialed Calls list (P56)/Dialed Calls detail screen (P56) y
h [Function] y Perform the following operations
Making/Answering Calls
The following icons indicate types of calls:
$★$: Voice Call $★$: Video Call $★$: Dialed Call $★$: Missed Dialed Call $★$: Number1
• Dialed calls made to parties saved in the Phonebook have icons saved under "Type".
Store
Video Call
Makes a video call to the phone number in the history.
XXXXX
Save a phone number from a call log to the Phonebook. Go to Step 2 (P95) in "Saving Contacts to Phonebook from
Received Calls or Dialed Calls".
Delete
Deletes the selected/displayed entry.
yh [Yes]
Delete All
Deletes all entries from the Dialed Calls.
yh [Yes]
Caller ID
Sets to show/hide the Caller ID.
y "Show ID"/"Hide ID"
Send Message
Creates and sends a new mail with the phone number in the Dialed Calls. →P172
Add Digits
The phone number entry screen opens with the phone number in the history entered. Go to Step 2 in "Making a Call"
(P54).
Attach Number
Phonebook
: Opens the Phonebook list.
Dialed Calls
: Opens the Dialed Calls list.
Received Calls : Opens the Received Calls list.
Multi Number
Select a number and make a call. →P251
Copy All Text
Copies all text on the Dialed Calls detail screen.
Calling the Last Dialed Number
You can open the phone number entry screen with the last dialed number entered to make
a call easily.
cy $★$ (Accessories) y "Recent Calls" y "Notepad"
The phone number entry screen opens with the phone number entered.
o/c
• Press c to make a call in the same way (voice/video call) as before.
Continued on the next page
57
■ To make a video call
Press t.
Making/Answering Calls
Auto Redial
XXXXX
186/184
Redialing Automatically
Default
Off (Checking the specifications)
You can set the handset to redial automatically when a call was not connected due to a
busy line, etc. (Checking the specifications)
cy $★$ (Settings) y "General Settings" y "Auto Redial" y "On"/
"Off"
Showing/Hiding Caller ID for Each Call
There are 2 ways to show/hide Caller ID for each call: adding "184"/"186", or using the
function menu on the phone number entry screen.
Showing/Hiding Caller ID by Adding 184/186
Enter "184"/"186" y enter the phone number
■ To show Caller ID
Enter "186" before the phone number.
■ To hide Caller ID
Enter "184" before the phone number.
o/c
■ To make a video call
Press t.
Showing/Hiding Caller ID Using the Function Menu
Enter the phone number yh [Function] y "Caller ID" y
"Show ID"/"Hide ID"
o/c
■ To make a video call
Press t.
• The same operation is available from the Phonebook, Dialed Calls or Received Calls lists/detail screens.
• You can set to show/hide Caller ID to the network in advance. →P51
• You can set to Show/Hide Caller ID for each Contact. →P128
58
Showing/Hiding Caller ID for the Next Call
cy $★$ (Settings) y "In-Call Setup" y "Caller ID Notification"
y "Next Call Only" y "Show"/"Hide"
Sending Push Signals Quickly
• Signals may not be received depending on the device on the receiving side.
XXXXX
Enter "p"/"w"/"n" and a number after the phone number to send number after the
alphabetic character as push signals (DTMF).
Making/Answering Calls
You can set to show/hide the Caller ID for the next call in advance. (Checking the
specifications)
Entering "p"
A call can be made with a "p" and a number after the phone number. After the number
before "p" is connected, the number after "p" is sent in DTMF about three seconds later.
This function is convenient for dialing an extension after a phone number is connected.
Enter a phone number y h [Function] y "Insert" y "Pause"
y enter a number to send y o/c
After the call is connected, the number after "p" is sent automatically.
Entering "w"
A call can be made entering a "w" and a number after the phone number. When the
number before "w" is connected, the number after "w" is keyed in waiting to be sent in
DTMF. This function is convenient for sending a message to a pager, reserving tickets, or
checking the balance of your bank account over the phone.
Enter a phone number y h [Function] y "Insert" y "Wait" y
Enter a number to send y o/c
h [OK]
The number after "w" is sent.
Entering "n"
You can make a call entering "n" after a phone number and entering a number to be sent
instead of "n". After the number before "n" is connected, the number entered for "n" is
sent in DTMF. This function is convenient to make an international credit card call that is
connected using the access number and then requires a credit card number, PIN number
or a phone number.
*: From January, 2001, the DoCoMo pager service changed its name to QUICKCAST.
Continued on the next page
59
a
Enter a phone number y h [Function] y "Insert" y "n" y
Enter a number to send y o/c
Making/Answering Calls
The entry screen of the number to be sent instead of "n" is displayed.
Enter "n" value y i [OK]
When the call is connected, the entered number is sent instead of "n".
WORLD CALL
Making International Calls
XXXXX
WORLD CALL is an international calling service available from a DoCoMo mobile phone.
FOMA service subscribers are also signed up for WORLD CALL at the time of initial
subscription (except subscribers explicitly declining this service).
• You can make calls to about 220 countries and regions around the world.
• Charges for "WORLD CALL" are added to the monthly FOMA service call charges.
• No initial fee and no fixed monthly charges apply.
• This service is not available with some billing plans.
• For details on WORLD CALL, contact the "DoCoMo Information Center" on the back of this manual.
• When using international carriers other than DoCoMo, contact the prospective carrier directly.
Changes to the International Call Dialing Procedure
The "MY LINE" service is not applicable to mobile phone communications, including
WORLD CALL service. Along with the introduction of the "MY LINE" service, the dialing
procedure for international communications using a mobile phone has been changed.
Consequently, the previous dialing procedure (Step 1 in "Making an International Call"
(P37) without the prefix "010") can no longer be used.
An "International Video Call" to an overseas party with a specific 3G mobile phone can be made by pressing
t after the following dialing procedures.
• For information about the countries where connection can be made and telecommunications carriers, refer
to the DoCoMo's Web site.
• For details, contact the "DoCoMo Information Center" on the back of this manual.
Making an International Call by Entering a Phone Number
Enter the phone number in the following format:
Enter "009130-010-Country Code-Area Code (City Code)-Phone
Number"
• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as
Italy, the leading "0" may be required)
o/c
■ To make a video call
Press t.
60
Making an International Call Using "+"
• Set "Auto-Assist Settings" of "International Access Code" to "On" before making a call. →P62
• The automatically added International Access Code is set to WORLD CALL (009130010) by default. →P62
0 (for 1+ seconds) y Enter "Country Code - Area Code (City
Code) - Phone Number"
• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as
Italy, the leading "0" may be required).
o/c
The confirmation to dial is displayed.
XXXXX
Making/Answering Calls
Enter "+" at the beginning of a phone number and dial to replace "+" with an international
access code automatically. Press 0 for 1+ seconds to enter "+".
• The phone number with the International Access Code added is displayed on the confirmation to dial
screen.
■ To make a video call
Press t.
h [Yes]
• This option is available only inside the FOMA network service area.
• If the phone number has "+81" as its prefix, "+" will not be converted into the International Access Code.
Making an International Call Using a Function Menu
You can select an international access code from the function menu and add it to the
phone number.
Enter "Country Code - Area Code (City Code) - Phone Number"
• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as
Italy, the leading "0" may be required).
h [Function] y "Add International Access No." y Select a
number yh [Select]
The international access code is added at the beginning of the phone number.
o/c
■ To make a video call
Press t.
• WORLD CALL is set as the international access code by default. International access codes can be added. →P62
61
Making an International Call Easily
Making/Answering Calls
Setting to Add the International Access Code Automatically
Default
Auto Assist: Off
Access Code: World Call (0091300101)
You can set whether to add an international access code automatically instead of "+"
when you make a call by entering "+" at the beginning of the phone number. Also, you can
specify the international access code to be added automatically.
XXXXX
cy $★$ (Settings) y "In-Call Setup" y "Intl Dial Settings" y
"Intl Access Code" y "Auto-Assist Settings" y Perform the
following operations
Auto Assist
y"On"/"Off"
Access Code
y Select an International access code yh [Select]
Access Code
• You can save international access codes under "IDD Prefix Settings".
International Call Setting
Storing International Access Codes
Up to three international access codes can be stored.
cy $★$ (Settings) y "In-Call Setup" y "Intl Dial
Settings" y "Intl Access Code" y "IDD Prefix
Settings"
• c: View the stored international access codes.
IDD Prefix Settings
screen
"[New Entry]" y Perform the following operations
Name
Save the name of the international access code. Up to XX full-pitch or XX half-pitch characters can be entered.
y Enter the name yi [OK]
Access Code
Up to XX digits can be entered.
y Enter the access code yi [OK]
62
h [Complete]
• The following operations are available by pressing h [Function] on the name entry screen/access number entry screen:
The Function Menu on the IDD Prefix Settings Screen
• The function menu is available only while a saved international access code is selected.
IDD Prefix Settings screen (P62) yh [Function] y Perform the
following operations
You can correct the selected international access code. Go to Step 2 of "Storing International Access Code" (P62).
Delete
XXXXX
Edit
Making/Answering Calls
- Select "Editing Function" to edit text. →P261
- Select "Cancel Entry" to cancel saving.
The selected international access code will be deleted.
New
Go to Step 2 of "Storing International Access Code" (P62).
Edit
• The pre-installed "World Call" number can also be edited.
Delete
• The international access number set as Auto-Assist cannot be deleted.
Sub Address
Making a Call by Specifying a Sub Address
Default
(Checking the specifications)
You can set whether digits after "*" of a phone number with "*" inserted are identified as a
sub-address. A sub-address is used to call up a specific device connected to an ISDN line
or to select contents on "V live".
cy $★$ (Settings) y "In-Call Setup" y "Sub Address" y "On"/
"Off"
• "*" is not identified as a delimiter of a sub-address if: (Checking the specifications)
- "*" is entered at the beginning of the phone number
- A specific number such as "184" or "186" is entered at the beginning of the phone number
- "*" is entered right after "p" or "w"
63
In-Call Timer
Making/Answering Calls
Warning with Display and Alarm when a Set Period
Elapses during a Call
Default
Display: Off
Beep: Off
You can set to warn by displaying information about a call on the screen and sounding an
alarm if the set period of time elapses during the call. (Checking the specifications)
cy (Settings) y "In-Call Setup" y "In-Call Timer" y Perform
the following operations
XXXXX
Display
Time
: Shows the duration of the call.
Credit Available : Shows the available remaining amount to the amount set under "Credit Limit".
Off
: Nothing is displayed.
Beep
Enter an interval between Beeps of the range from 1 second to 999 seconds.
y "60 Seconds"/"Off" y Enter Beep interval yi [OK]
• The alarm setting completes if you select "Off".
• The following operations are available by pressing h [Function] on the alarm interval entry screen:
- Select "Editing Function" to edit text. →P261
- Select "Cancel Entry" to cancel saving.
Display
• If "Credit Available" is set, it is impossible to make a call and the counter is reset when exceeding the "Credit Limit".
Talking Using Handsfree
You can set to hear the other party's voice from the speaker.
Talking screen (P54) yh [Function] y "Spkrphone On"
■ To cancel a handsfree talking
Press h [Function] and select "Spkrphone Off". (Checking the specifications)
• Keep a distance of at least XX cm between the handset and your ear during a Handsfree call.
• To operate during a video call →P83
In-Car Handsfree
Talking in a Car, Hands Free
Connecting the handset to a handsfree device, such as an in-car handsfree kit 01
(optional) or a car navigation system, allows you to make or receive a voice call from a
handsfree device.
64
For operations of a handsfree device, refer to the user manual of the device. To use an incar handsfree kit 01 (optional) via USB, a FOMA in-car handsfree cable 01 (optional) is
necessary.
• To use a handsfree device via USB connection, set "USB Mode Settings" to "Data Connection".
• Screen display for incoming or a ringtone are in accord with the settings on the handset.
• When you switch to handsfree, a ringtone sounds from the handsfree device even if Manner Mode is set or "Ring Volume" is
set to "0" for the handset.
• The incoming call actions with Public Mode (Drive Mode) activated is in accord with Public Mode (Drive Mode) settings.
• The ring actions with Answering Machine activated is in accord with the "Record Message" settings.
Making/Answering Calls
• If you connect the handset with a Bluetooth handsfree device via a Bluetooth connection, register the device before
connecting.
• Folding the handset during a call does not affect the call. (Checking the specifications)
XXXXX
Talking via Bluetooth
You can talk connecting the handset to a commercially available Bluetooth device such
as a Bluetooth headset.
• Register the Bluetooth device before connecting it to the handset. →P239
• For operations of a Bluetooth device, refer to the user manual of the device.
Make/Receive a Call using a Bluetooth device
• $★$ appears when the handset is connected to a Bluetooth device.
■ To switch to a Bluetooth device during a call
(Checking the specifications)
Receiving a Call
A call arrives
The ringtone sounds and the incoming call lamp blinks.
• NM: Stops the ringtone or vibration.
o/i [Answer]
To be inserted
Incoming call
screen
Answer the call.
p to terminate the call
■ Display of the Incoming call screen (with Caller ID)
If the caller is saved in the Phonebook, the name and phone number are displayed. If an image is saved in the Phonebook,
the specified image is displayed. (Checking the specifications)
• If an image is saved for a group, the image for the group takes precedence to be displayed. (Checking the specifications)
• When the "Secret Data" is set to "Hide", "Private ID" is displayed when a call arrives from a caller saved as secret in the
Phonebook.
Continued on the next page
65
Making/Answering Calls
• If a call arrives to an additional number of Multi Number, the ringtone set in "Multi Number" sounds and the following icon
appears on the incoming screen:
$★$/$★$: Incoming voice call
$★$/$★$: Incoming video call
$★$/$★$: Incoming data
■ Display on the Incoming call screen (without Caller ID)
The reason for no Caller ID is displayed instead of a phone number. →P127
• The incoming call actions such as a ringtone, vibration or screen display vary depending on the settings in "Style". →P106,
P108
• When Manner Mode is set, the ringtone does not sound. When Public Mode (Drive Mode) is set, the ringtone does not sound
and the incoming call lamp does not blink.
• When "Multi-key" is set, you can answer the call by pressing a key other than the key in Step 2.
• When "Open to Answer" is set, you can answer a call by opening the handset.
XXXXX
• If you subscribe to the Voicemail, Call Waiting or Call Forwarding service, when "Incoming Call Mgmt" is set to "Answer Call"
and "Incoming Call Setting" is enabled, a busy tone during a call sounds if a call arrives during another call, If a busy tone
during a call sounds, each service is available. →P251
• You can set "Ring Delay" to delay the incoming call action for a call made from a party not saved in the Phonebook.
• Use the following functions to reject incoming calls from a caller not saved in Contacts/specific caller.
- Set "Not in Phonebook" to "Reject".
- Set "Reject Calls" of Phonebook to "Yes".
The Function Menu on the Incoming Call Screen
Incoming call screen (P65) yh [Function] y Perform the
following operations
Answer
Answer the ringing call.
End Active Call & Answer
Terminate an active voice call to answer a ringing call.
End Held Call & Answer
Terminates a call on answer hold to answer another call. (Checking the specifications)
Reject Call
Reject an incoming call and hang up.
Response Hold
Places the call on hold.
Voicemail
Connects a call to the Voicemail center.
Call Forwarding
Transfers an incoming call to the specified number.
Voicemail
• This option is not available unless you subscribe to the Voicemail service.
Call Forwarding
• This option is not available unless you subscribe to the Call Forwarding service and you specify a forwarding destination.
66
Multi-key
Answering a Call by Pressing a Dial Key
On
cy $★$ (Settings) y "In-Call Setup" y "Answer Function" y
"Multi-key" y "On"/"Off"
XXXXX
• After setting, the following keys can be used to answer a call.
Making/Answering Calls
Default
You can set to answer a voice call by pressing a key other than i [Answer], o, J
(for 1+ seconds). (Checking the specifications)
t, m, 0 to 9, *, #, c, C
• This function is not available when a video call arrives.
Open to Answer
Answering a Call by Opening the Handset
Default
On
You can set to answer a voice or video call by simply opening the handset when a call
arrives while the handset is folded.
cy $★$ (Settings) y "In-Call Setup" y "Answer Function" y
"Open to Answer" y "On"/"Off"
• When "Open to Answer" is set, answer hold operations or function menu of the incoming call screen are unavailable.
Received Calls
Using Received Calls
Up to 20 incoming voice or video call entries are saved in Received Calls. A phone
number, received date and time, ringing duration, and show/hide Caller ID are saved in the
entries.
• If there are more than 20 entries, the oldest entries will be overwritten first.
• Receiving a call from the same phone number overwrites the entry of the latest received date and time.
ly "Received Calls"
• The caller's name appears if the caller is saved in the Phonebook.
Received Calls list
Continued on the next page
67
b
Select an entry yc
Making/Answering Calls
Screen to be
inserted
Received Calls
detail screen
o/t
The phone number entry screen opens with the phone number entered.
o/c
XXXXX
• Press c to make a call in the same way (voice/video call) as the entry.
■ To make a video call
Press t.
• Operations of a function menu from the Received Calls list or Received Calls detail screen are the same as the Dialed Calls
list or Dialed Calls detail screen. →P57
• You can make a call also by selecting an entry on the Received Calls list and performing Step 3 and subsequent steps.
• If the call arrives to an additional number of Multi Number, the icon of the number is displayed. (Checking the specifications)
• The reason for no Caller ID is displayed for the call log entry without Caller ID. →P127
• Dialed Calls entries from a caller who is saved as secret when "Secret Data" is set to "Hide", or a caller whose calls are set to
be rejected in Phonebook are displayed as "Secret" on the Received Calls list or Received Calls detail screen.
• Calls made to parties who are not saved in the Phonebook are displayed as "Name unknown" on the Received Calls detail
screen.
• When "Show in Call Logs" is set to "Off", a call that is hung up within the time set in "Ring Delay" is not saved in Received Calls.
• The call log entry of a dialed call may have a different number from the number actually dialed.
■ Icons on the Received Calls list screen (Checking the specifications)
The following icons indicate types of calls:
$★$: Voice call $★$: Video call $★$: Connected call $★$: Missed call $★$: Number1
• Received calls from parties saved in the Phonebook have icons saved under "Type".
$★$: Number2
Adjusting the Other Party's Volume during a Call
Default
(Checking the specifications)
The earpiece volume can be adjusted in X levels from X to X. (Checking the
specifications)
Talking screen (P54) yN/M
• N: Increases the volume.
• M: Decreases the volume.
• The adjusted earpiece volume will be retained after the call. (Checking the specifications)
68
Adjusting the Ringtone Volume
• The default settings vary depending on the settings of "Style".
N/M
• When the volume is set to "1", pressing M sets "Vibrate" and pressing M again sets "Silent".
• The ringtone volume cannot be adjusted when Manner Mode is set.
• The set volume is used for incoming calls, incoming mails, Voicemail calls, Calendar alarms, incoming data, and Reminders.
(Checking the specifications)
XXXXX
• You can also set the ringtone volume using "Detail" under "Sound Profiles".
Making/Answering Calls
Default
The ringtone volume can be adjusted in 8 levels from 0 to 7.
Power Setting
Saving Power Consumption during a Call
Default
On
(Checking the specifications)
cy $★$ (Settings) y "General Settings" y "Battery Save" y
"On"/"Off"
Placing a Call on Hold When You Cannot Answer the Call
Incoming call screen (P65) yp
The call is placed on answer hold. The caller hears the hold tone set in
"Response Hold Tone" under "Call Hold".
Screen to be
inserted
Response Hold
screen
o when you can answer the call
■ Video calls
Press o/t to send a camera image to the other party. Press i [Use Image] to send the
image set in "Alternate image"/Chara-den to the other party.
■ To terminate a call
Press p.
• The caller is charged even during an answer hold.
• When the handset is folded and "Open to Answer" is set, answer hold is not available.
Continued on the next page
69
• If you subscribe to the Voicemail service/Call Forwarding service, you can connect the incoming call to the Voicemail Center
or forward the incoming call to the specified phone number. →P66, P84
Making/Answering Calls
Response Hold Tone
Setting the Response Hold Tone
You can set the response hold tone to Japanese/English. You can also record and set a
personal answer hold tone.
Specifying a Response Hold Tone
Default
Japanese
XXXXX
cy$★$ (Settings) y "In-Call Setup" y "Call
Hold" y "Response Hold Tone"
Japanese : The response hold tone is set to Japanese.
English
: The response hold tone is set to English.
Personal : The response hold tone is set to Recorded data.
Response Hold
Tone screen
Select a hold tone yc
Personal
• If an Answer Hold Tone has not been recorded, "Personal" is displayed as "New".
■ Response Hold Tone
An Response hold tone is played as follows:
Japanese
I cannot take your call now. Please wait or call again later.
English
I cannot take your call now. Please hold the line for a moment or call me back later. Thank you.
Recording Response Hold Tone
Response Hold Tone screen (P70) y Select "New" y
h [Record]
Start recording. After recording finishes, the Response Hold Tone screen returns.
• After recording completes, "New" is changed to "Personal".
• For recording, see "Recording Voice Notes" (P218).
70
The Function Menu on the Response Hold Tone Screen
Response Hold Tone screen (P70) yh [Function] y Perform
the following operations
Set as Default
Sets the selected item as the response hold tone.
Play
Plays the selected item.
Rerecord
Making/Answering Calls
Records the data again.
yh [Yes] y Record
XXXXX
Delete
Deletes the recorded data.
Placing a Call on Hold
Talking screen (P54) yh [Function] y "Hold"
The call is placed on hold. The hold tone set in "Answer Hold" under "Call Hold" is played
to the caller.
■ Video calls
The hold tone and image set in "Videocall Hold" under "Call Hold" are sent to the caller.
o when you can answer the call (Checking the specifications)
■ Video calls
Press o/t to send a camera image to the other party. Press i [Use Image] to send the
image set in "Alternate Image"/Chara-den to the other party. (Checking the specifications)
■ To terminate a call
Press p.
Answer Hold
Setting the Answer Hold Tone and Image
Default
Answer Hold Tone: Japanese Answer Hold Image: (Checking the specifications)
You can set a hold tone and an image that is displayed on your handset and the other
party's while a call is on hold. (Checking the specifications)
cy $★$ (Settings) y "In-Call Setup" y "Call Hold" y"Answer
Hold" y Perform the following operations
Answer Hold Tone
Japanese
: The answer hold tone is set to Japanese.
English
: The answer hold tone is set to English.
Answer Hold Image
y Select a folder ycy Select an image yc
Continued on the next page
71
■ Answer hold tone
The Answer hold tone is played as follows:
Making/Answering Calls
Japanese
(Checking the specifications)
English
(Checking the specifications)
Public Mode (Drive Mode)
Using Public Mode (Drive Mode)
XXXXX
Public Mode is an automatic response service to assist in observing manners in public
locations. When Public Mode is set, a voice prompt is played to the caller indicating that
you are driving or at a place where you cannot talk (such as on a train, bus, or in a movie
theater) and cannot answer the call, and the call is disconnected.
• You can set or cancel Public Mode only in Standby (and when $★$ is displayed).
• This option is not available during data communication.
* (for 1+ seconds)
When a call arrives, a voice prompt is played indicating that "you are either driving or at a
place where you cannot use the handset and cannot answer the call. Please call again
later.".
■ To cancel Public Mode (Drive Mode)
Press * (for 1+ seconds) on the wallpaper screen.
■ When Public Mode (Drive Mode) is set
Even when a call arrives to your handset, the ringtone does not sound. "X Missed Calls" is displayed on the screen and the
call is stored in Received Calls.
A voice prompt indicating that you are driving or you are at a location where you cannot use the handset is played to the
caller, and the call is disconnected.
• $★$ appears at the top of the screen when Public Mode is set.
• Even when Public Mode is set, you can make calls as usual.
• If a call with "Private Calling" arrives when Caller ID Display Request Service is set, a voice prompt of Caller ID Display
Request service is played (instead of Public Mode voice prompt).
• If Manner Mode is set concurrently, Public Mode (Drive Mode) settings take precedence.
• No tones from FOMA handset sound when Public Mode (Drive Mode) is set.
Incoming Call Actions When a Network Service and Public Mode (Drive
Mode) are Set
Actions performed when Public Mode and a Network Service are set concurrently.
72
Service
Incoming Actions for a Voice Call
Incoming Actions for a Video Call
Voicemail service
After the Public Mode voice prompt is
played, the call is connected to the
Voicemail Center.*
The Public Mode image prompt does not
appear, and the call is connected to the
Voicemail Center.
Call Waiting service
After the Public Mode voice prompt is
played, the call is terminated.
After the Public Mode image prompt is
shown, the call is terminated.
Service
The Public Mode image prompt does not
appear, and the call is forwarded to the
forwarding destination. If the forwarding
destination cannot handle video calls,
the call is terminated.
Nuisance Call Barring
service
If the caller is saved to reject a
nuisance call, the reject call voice
prompt is played and the call is
terminated.
In a case other than the above, the
Public Mode voice prompt is played
and the call is terminated.
If the caller is saved to reject a nuisance
call, the reject call image prompt is
shown and the call is terminated.
In a case other than the above, the
Public Mode image prompt is shown and
the call is terminated.
Caller ID Display Request
service
If the caller does not send the Caller
ID, the Caller ID display request
voice prompt is played and the call is
terminated.
If the caller sends the Caller ID, the
Public Mode voice prompt is played
and the call is terminated.
If the caller does not send the Caller ID,
the Caller ID display request voice
prompt is played and the call is
terminated.
If the caller sends the Caller ID, the
Public Mode image prompt is shown and
the call is terminated.
XXXXX
Incoming Actions for a Video Call
After the Public Mode voice prompt is
played, the call is forwarded to the
forwarding destination.*
Whether the Public Mode voice
prompt is played varies depending
on the settings of Call Forwarding
service voice prompt option.
Making/Answering Calls
Incoming Actions for a Voice Call
Call Forwarding service
*: If the ring time for a Network Service is set to 0 (zero) seconds, the Public Mode voice prompt is not played, and the call is not
recorded in Received Calls.
Public Mode (Power Off)
Using Public Mode (Power Off)
Public Mode (Power Off) is an automatic response service to assist with observing
manners in public locations. When Public Mode (Power Off) is set, when a call arrives
while the power is turned off, a voice prompt is played to the caller indicating that you are
at a place where the device must be turned off (such as in hospitals, in aircraft, or near
priority seats on a train) and cannot answer the call, and the call is disconnected.
Enter "*25251" yo
Public Mode (Power Off) is set (the stand-by display appears the same).
After Public Mode (Power Off) is set, when a call arrives while the power is turned off, a
voice prompt is played indicating that "you are at a place where you must turn the device
off and cannot answer the call. Please call again later".
■ To cancel Public Mode (Power Off)
Enter "*25250" and press o.
■ To check the status of Public Mode (Power Off)
Enter "*25259" and press o.
■ After setting Public Mode (Power Off)
Public Mode (Power Off) is activated until it is cancelled by dialing "*25250". Turning the power On does not cancel the
mode.
The Public Mode (Power Off) voice prompt is played even when you are out of the service area or where no signals are
received. A voice prompt indicating that you are at a location where you must turn the device off is played to the caller, and
the call is disconnected.
Continued on the next page
73
Making/Answering Calls
Incoming Call Actions When a Network Service and Public Mode (Power
Off) are Set
Actions performed when Public Mode and a Network Service are set concurrently.
Incoming Actions for a Voice Call
After the Public Mode (Power Off)
voice prompt is played, the call is
connected to the Voicemail Center.*
The Public Mode (Power Off) voice
prompt is not played, and the call is
connected to the Voicemail Center.
Call Forwarding service
After the Public Mode (Power Off)
voice prompt is played, the call is
connected to the forwarding
destination.*
Whether the Public Mode voice
prompt is played is according to the
settings of Call Forwarding service
voice prompt option.
The Public Mode (Power Off) image
prompt does not appear, and the call is
forwarded to the forwarding destination.
If the forwarding destination cannot
handle video calls, the call is terminated.
Nuisance Call Barring
service
If the caller is saved to reject a
nuisance call, the reject call voice
prompt is played and the call is
terminated.
In a case other than the above, the
Public Mode (Power Off) voice
prompt is played and the call is
terminated.
If the caller is saved to reject a nuisance
call, a message indicating that the call
was not connected and the call is
terminated.
In a case other than the above, the
Public Mode (Power Off) image prompt
is shown and the call is terminated.
Caller ID Display Request
service
If the caller does not send the Caller
ID, the Caller ID display request
voice prompt is played and the call is
terminated.
If the caller sends the Caller ID, the
Public Mode (Power Off) voice
prompt is played and the call is
terminated.
If the caller does not send the Caller ID,
the Caller ID display request voice
prompt is played and the call is
terminated.
If the caller sends the Caller ID, the
Public Mode (Power Off) image prompt
is shown and the call is terminated.
XXXXX
Service
Voicemail service
Incoming Actions for a Video Call
*: If the ring time for a Network Service is set to 0 (zero) seconds, the Public Mode (Power Off) voice prompt is not played, and the
call is not recorded in Received Calls.
Checking Missed Calls
If you could not answer a call, the Missed call notification screen is displayed on the
wallpaper screen. From the Missed call notification screen, you can check the caller.
An incoming call terminates
The number of missed calls is displayed.
• i [Exit]: The Missed call notification screen is closed.
h [View]
The Received list screen opens. $★$ appears for a Missed Call.
Select a missed call entry yc
The Received Calls list detail screen opens.
74
Missed call
notification screen
• After checking a missed call, the notification screen will not open.
Answering Machine
Recording of Voice/Video-clip Message from a Caller
when You Cannot Answer a Call
XXXXX
Even if you do not subscribe to the Voicemail service, a response message indicating that
you cannot answer the call can be played, and your handset can record the voice/image
message.
Making/Answering Calls
• When "Show in Call Logs" is set to "No", the Missed call notification screen for a call that is hung up within the time set in "Ring
Delay" is not displayed.
Setting the Answering Machine
Default
Record Message: Off Response Time: 8Sec Record Time: 30Sec
Response Greeting: Japanese Response Image: Japanese
cy $★$ (Accessories) y "Record Message"
yh [Function] y "Setting"
Settings screen
Perform the following operations
Record Message
Activate/deactivate the Answering Machine.
y"On"/"Off"
Response Time
Set the duration of time from when the call arrives until Answering Machine launches. Enter between XX - XX seconds.
Use j to enter the time yh [OK]
Record Time
Set the recording time for the Answering Machine.
Select a recording time yh [Select]
Response Greeting
Japanese : The message language is set to Japanese.
English
: The message language is set to English.
Personal : The message is set as Recorded data.
Response Image
Japanese : The Response image is set to Japanese.
English
: The Response image is set to English.
Continued on the next page
75
• $★$ appears at the top of the screen when the Answering Machine is set.
Making/Answering Calls
Response Time
• The time also can be entered using dial keys.
• If the Response time is set longer than the ring time of the Voicemail/Call Forwarding service, the setting for the service takes
precedence.
• If the Response time is set shorter than the set "Ring Delay", Answering Machine launches without the ring action.
Response Greeting
• If the Response Greeting has not been recorded, "Personal" is displayed as "New".
• If recorded data is deleted, the Response Greeting reverts to "Japanese". (Checking the specifications)
Response Image
• The following operations are available by pressing h [Function] on the Response image list:
XXXXX
- Select "Set as Default" to set the selected item as the Response image.
- Select "Preview" to view the selected response image.
Response Greeting
Recording a Response Greeting
Settings screen (P75) y "Response Greeting"
Select "New" yc
Greeting List
• After recording completes, "New" is changed to "Personal".
• For recording, see "Recording Voice Notes" (P218).
The Function Menu on Greeting List
Greeting List screen (P76) yh [Function] y Perform the
following operations
Set as Default
Sets the selected item as the Response Greeting.
Play
Plays the selected Response Greeting.
Edit
Records the greeting again.
Delete
Deletes the recorded greeting.
yh [Yes]
76
When Record Message is Activated
A call arrives y the Response Message is played
The Response Message is played after the set response time elapses.
The Response Image is also sent for a video call.
• h [Answer]: Stop the Response Greeting and answer the call.
Greeting playback
screen
• i [Disconnect]: Disconnect the call.
Recording starts
Making/Answering Calls
The caller's voice is recorded for a voice call, and the caller's image for a video call.
The other party's voice in recording hears from the earpiece.
Recording Message
• i [Disconnect]: Disconnect the call.
XXXXX
• h [Answer]: Stop recording and answer the call.
Recording completes
• h [Play]: Play the Answering Machine message.
■ If more than one message/video clip is recorded in the Answering
Machine
The number of recordings is displayed on the New Message notification
screen. Press [View] to display the Recorded message list.
New Message
notification screen
• The number of messages that can be recorded varies depending on the available memory space. You can check the available
memory space for recording messages. →P78
• The Answering Machine is not available when $★$ is displayed, the handset power is turned off, or Public Mode (Drive Mode)
is set.
■ Notice
It is recommended that you write down messages from the Answering Machine and store them in a
separate location. DoCoMo is not responsible for lost recorded messages due to failure or repair of the
FOMA handset.
Playing/Deleting Record Message
Playing Record Message
cy $★$ (Accessories) y "Record Message"
• The caller's name appears if a caller saved in the Phonebook recorded a
message. (Checking the specifications)
Screen to be
inserted
Recorded message
list
77
b
Select a recorded message yc
The message is played.
Making/Answering Calls
• c/ u: Pauses.
• l/r: Plays the previous/next message.
• d: Stops the playback.
• i [Return]: Returns to the Recorded message list screen. (Checking the specifications)
■ Icons on the Recorded message list screen (Checking the specifications)
The following icons indicate types of messages:
$★$: Unchecked voice call message
$★$: Unchecked video call message
$★$: Checked voice call message
$★$: Checked video call message
$★$: Protected voice call message
$★$: Protected video call message
XXXXX
• The function menu operations on the Answering Machine playback screen are identical to those on the melody playback
screen.(Checking the specifications) →P213
The Function Menu on the Recorded Message List
Recorded message list screen (P77) yh [Function] y Perform
the following operations
Play
Plays the selected message recorded in the answering Machine.
Call
Make a call to the phone number of the selected message recorded in the Answering Machine.
yo/t
Add to Ph Book
Save the caller's phone number of the selected message recorded in the Answering Machine to the phonebook. Go to
Step 2 in "Saving Contacts to Phonebook from Received Calls or Dialed Calls" (P94).
Delete
Deletes the selected message recorded in the Answering Machine.
yh [Yes]
Delete All
Deletes all messages recorded in the Answering Machine.
yh [Yes]
Lock・Unlock
Protects/Unprotects a message recorded in the Answering Machine.
Settings
Sets the Answering Machine. Go to Step 2 (P95) in "Setting the Answering Machine".
View Free Space
Checks the available space, used space and total space for Answering Machine.
78
Making/Answering Video Calls
Video Calls ..................................................................................................................80
Making a Video Call ....................................................................................................80
Receiving a Video Call................................................................................................83
Using Chara-den .........................................................................................................85
Setting the Image to Send to the Other Party ..........................................................85
Setting Handsfree for Video Calls .......................................................86
Setting a Displayed Image during a Video Call........................................................86
Setting a Video Call Hold Tone and Image ..................................87
Changing the Video Call Settings