Motorola Mobility T6HF1 T505 BT Car Kit User Manual 9503a46o Front

Motorola Mobility LLC T505 BT Car Kit 9503a46o Front

Users manual

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2007.Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.hellomoto.com1-877-MOTOBLU1-888-390-6456 (TTY/TDD United States for hearing impaired)Guide Number: 6809503A46-OBluetooth ID: xxxxxxTEST AND USEBefore using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.Take a moment before you get started to familiarize yourself with your new MOTOROKR™ T3 Bluetooth® Wireless Music and Handsfree Car Speaker.BEFORE YOU BEGIN1SET UPSTART HERE >12To get started, your MOTOROKR T3 must be set up with initial configuration settings.Press and hold Power button to enter setup mode. You hear a voice prompt to select appropriate language for remaining voice prompts.Select language for voice prompts as follows:Press Volume buttons to change current selection.Press Play/Pause button to make selection. You hear a confirmation tone.3Select whether to enable/disable the auto caller ID feature:Press Volume buttons to select enable or disable.Press Play/Pause button to confirm selection. You hear a confirmation tone.4When setup is complete, you hear the voice prompt “Setup is complete. Device is ready.” After a few moments, your MOTOROKR T3 enters Bluetooth pairing mode.ababPress (Menu) > Settings > Connection > Bluetooth Link > Setup.Scroll to Power.Select Change.Scroll to On.Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.To use your MOTOROKR T3, you must turn on the Bluetooth feature in your phone or music device.For most Motorola phones:MYour MOTOROKR T3123452PAIRYour MOTOROKR T3 and Bluetooth DeviceBefore you can use your MOTOROKR T3, you must pair (link) it with your phone and/or music device.Step A - ENSURE MOTOROKR T3 IS IN PAIRING MODEWhen setup is complete (step 1), your MOTOROKR T3 is automatically placed in Bluetooth pairing mode. The main indicator light will be steadily lit in blue to indicate handsfree speaker is in pairing mode.If the handsfree speaker is not pairing mode, see TROUBLESHOOTING for help.Step C - SET YOUR DEVICE TO LOOK FOR YOUR MOTOROKR T3Step B - TURN ON BLUETOOTH FEATURE ON YOUR DEVICE While the MOTOROKR T3 is in pairing mode, use your phone or music device to perform a device discovery. Refer to your device’s manual for detailed instructions on accessing Bluetooth and putting it in device discovery mode.For most Motorola phones:34512Press (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds.Select Motorola T3.Select OK or Yes to pair your MOTOROKR T3 with your phone.Enter the passkey: 0000Select OK.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. When your MOTOROKR T3 successfully pairs and connects with your phone or music device, the main indicator light flashes purple and blue.MYour MOTOROKR T3 and phone or music device are now paired and connected. Do the following to verify proper operation: Press Play/Pause button again to complete setup. You hear a confirmation tone.3●To verify handsfree calling operation, dial the number you want to call on the phone and press SEND key on your phone. If your phone and MOTOROKR T3 are successfully paired, you will hear ringing on your T3.To verify streaming audio listening operation, play music on your streaming music device. If your music source and MOTOROKR T3 are successfully paired and connected for streaming music, you hear music on your T3. ●USING YOUR MOTOROKRT3SeeFeatures and Functions Guideon the reverse side for information onusing your T3My MOTOROKR T3 will not enter pairing mode.Make sure that any devices previously paired with the T3 are turned off. If the main indicator light is pulsing in blue, first turn off the other device, then turn your T3 off and on. The main indicator light becomes steadily lit in blue indicating the T3 is now in pairing mode. My phone/music device doesn't find my MOTOROKR T3.Make sure the indicator light on your T3 is on (lit in blue) and steady when your phone/music device is searching for devices (see step 2a).My MOTOROKR T3 worked before but now it's not working.Make sure your phone/music device is on and the Bluetooth feature is turned on in your device (see step 2b). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2b) and pair your device and T3 again (see step 2c).Support.If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/BluetoothsupportTROUBLESHOOTINGYOU’RE FINISHED!After you have successfully set up your MOTOROKR T3, you don't need to repeat these steps. For daily use, ensure that your T3 is turned ON and your phone and/or music device’s Bluetooth feature is ON.To modify T3 configuration settings, you can reenter setup mode by pressing and holding the Power and Call buttons when powering up.To use the T3 with your FM car radio, see “Using With Your FM Car Radio” on the reverse side.CHECKING BATTERY LEVELTo check your T3’s battery charge level while turned on and not on a call, you can by pressing and holding both Volume buttons until you hear a beep (about 5 seconds) The main indicator light displays charge status for a few seconds (see “Indicator Light” on reverse side for details).To charge your T3, see “Charging Battery” on the reverse side for details.Front View Rear ViewVolume UpButtonCallButtonPlay/PauseButtonMainIndicatorLightMicrophoneVisor ClipBezelIndicator LightSpeaker Volume DownButtonRadioButtonChargingPortPowerButtonMain Indicator Light(steadily bluefor pairing mode)DRAFTDRAFT
To install the T3 in your car, first slide metal visor clip onto T3, then secure T3 to the sun visor in your car as shown below.INSTALLING IN CAR SETTING FM CARRADIO FREQUENCYLISTENING TO MUSICMAKING CALLS• The essential requirements and other relevant provisions of Directive 1999/5/EC.• All other relevant EU Directives.European Union Directives Conformance Statement ProductApprovalNumberThe above gives an example of a typical Product Approval Number.You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.Hereby, Motorola declares that this product is in compliance with:TURNING MOTOROKR T3ON AND OFFTo turn your T3 on, press and hold the Power button until you hear the voice prompt “Device is ready”, and the main indicator light flash blue three times. To turn your T3 off, press and hold the Power button until you hear the voice prompt “Powering off”, and the main indicator light flash blue three times.Function ActionMake a voice dial call Tap the Call button and speak the name after the toneEnd a call Tap the Call buttonAnswer a call Tap the Call buttonIgnore a call Tap either Volume buttonReject a call Press and hold either Volume button until incoming call stops ringing Redial last call Press and hold the Call button for at least 2 seconds until you hear a beepNote: Some features are phone/network dependent.Note: Your T3 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. MAKING CALLS CONTINUEDFunction ActionMute or unmute a call Tap Play/Pause buttonAnswer a second Tap the Call button incoming callEnd an active call and Tap the Call buttonresume a call on holdIgnore a second Tap either Volume incoming call buttonNote: Some features are phone/network dependent.Function ActionPlay/Pause music Tap Play/Pause buttonSkip to next track Tap Volume Up buttonSkip to previous track Tap Volume Down buttonFast-forward track Press and hold Volume Up buttonRewind track Press and hold Volume Down buttonStop music player Press and hold the Play/Pause button until you hear a beep CHARGING BATTERY MAIN INDICATOR LIGHTWith the Charger Plugged InIndicator StatusRed Charging (battery level less than 80% charge)Yellow Charging (battery level more than 80% charge)Blue Charging completeWhen Checking Battery LevelIndicator StatusRed Battery at less than 10% chargeYellow Battery at between 10% and 80% chargeGreen Battery at more than 80% chargeWith No Charger Plugged InIndicator StatusOff Power offThree blue flashes Powering on/offSteady blue Pairing modeRapid blue/purple flashes Pairing successfulQuick blue flash Incoming/outgoing callSlow blue pulse Connected (on a call)/ Standby (not on a call)Slow red pulse Idle (not connected to Bluetooth device)Slow purple pulse Connected call mutedQuick red flash Low batterySlow green pulse Music streaming Note: After [xx] minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. MAIN INDICATOR LIGHTWith No Charger Plugged InIndicator StatusOff FM transmitter offOn FM transmitter onNote: After [xx] minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. BEZEL INDICATOR LIGHT AUDIO TONES (CONTINUED)Audio Tone StatusSeries of ascending tones Volume increasingSeries of descending Volume decreasingtonesTwo rapid ascending Mute enabledtonesTwo rapid descending Mute disabledtonesTwo short tones when Track forwardpressing Volume Up button when musicplayingTwo short tones when Track backwardpressing Volume Downbutton when musicplayingHigh/low tones Low batteryrepeated every 60 sec.No audio indications; Out of rangedeteriorating qualityWhen idle (not connected to a Bluetooth device) or not active for 30 minutes, the T3 powers down automatically.Plug the Motorola charger into the charging port on the rear of the T3.The main indicator light turns red or yellow when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the T3's battery is fully charged (about [x] hours), the indicator light turns green.Disconnect the charger.12Note: T3 is not functional while charging.When your MOTOROKR T3 is connected and operating with your phone and/or music device, you can route call and music audio to your car’s FM radio.To hear calls and streaming music over your FM car radio:USING WITH YOUR FMCAR RADIOPress Radio button on rear of your MOTOROKR T3. After a few moments, the bezel indicator light is lit and voice prompt states the currently set frequency (default is “88.1MHz”). Turn on your car’s FM radio and tune to broadcast frequency. Call and streaming music audio is broadcast on your FM 12To turn off FM transmitter, press and hold Radio button until the bezel indicator turns off.You can set the frequency used by the T3 to broadcast calls and streaming music to your FM car radio. To do this, tap the Radio button. The T3 searches for another clear frequency. When found, the voice prompts states the new frequency. (For example, if the new frequency is 96.1MHz, the voice prompt states “96.1MHz”.)[How do you save/confirm the new frequency?] AUDIO TONESAudio Tone StatusAscending tone Powering onTwo descending tones Powering offFour ascending tones Charger connectedFour descending tones Charger disconnectedThree ascending tones Connected callThree descending tones Disconnected callTwo short tones when Volume at minimumpressing Volume button or maximumIMPORTANT: Be sure to first follow theQuick Start Guideon the reverse side of this guideto complete initial setup of your MOTOROKR T3.Features and Functions GuidePowerButton12DRAFTDRAFT

Navigation menu