Motorola Mobility T6HF1 T505 BT Car Kit User Manual 9503a46o Front
Motorola Mobility LLC T505 BT Car Kit 9503a46o Front
Users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 842053 |
| Application ID | AX9XnZRAbsMujiDJRhBchw== |
| Document Description | Users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 189.31kB (2366423 bits) |
| Date Submitted | 2007-09-12 00:00:00 |
| Date Available | 2007-09-12 00:00:00 |
| Creation Date | 2007-06-04 08:46:57 |
| Producing Software | Adobe PDF library 7.77 |
| Document Lastmod | 2007-09-07 16:36:06 |
| Document Title | 9503a46o_Front |
| Document Creator | Adobe Illustrator CS2 |
BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Take a moment before you get started to familiarize yourself with your new MOTOROKR™ T3
Bluetooth® Wireless Music and Handsfree Car Speaker.
To get started, your MOTOROKR T3 must be
set up with initial configuration settings.
3 Select whether to enable/disable the
Front View
Visor Clip
Microphone
1 Press and hold Power button to enter
Rear View
Bezel
Indicator Light
setup mode. You hear a voice prompt to
select appropriate language for
remaining voice prompts.
2 Select language for voice prompts as
follows:
Speaker Call
Button
Main
Indicator
Light
Play/Pause
Button
Volume Down
Button
Radio
Button
Charging
Port
Power
Button
auto caller ID feature:
a Press Volume buttons to select enable
or disable.
b Press Play/Pause button to confirm
selection. You hear a confirmation
tone.
a Press Volume buttons to change
4 Press Play/Pause button again to complete
b Press Play/Pause button to make
When setup is complete, you hear the voice
prompt “Setup is complete. Device is ready.”
current selection.
Volume Up
Button
SET UP
Your MOTOROKR T3
selection. You hear a confirmation
tone.
setup. You hear a confirmation tone.
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809503A46-O
Step C - SET YOUR DEVICE TO LOOK FOR
YOUR MOTOROKR T3
While the MOTOROKR T3 is in pairing mode,
use your phone or music device to perform a
device discovery. Refer to your device’s manual
for detailed instructions on accessing Bluetooth
and putting it in device discovery mode.
For most Motorola phones:
© Motorola, Inc. 2007.
Your MOTOROKR T3 and phone or music device
are now paired and connected. Do the following
to verify proper operation:
●
1 Press M (Menu ) > Settings > Connection >
Bluetooth Link > Handsfree > Look for Devices.
Bluetooth ID: xxxxxx
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
The phone lists Bluetooth devices it finds.
2 Select Motorola T3.
3 Select OK or Yes to pair your MOTOROKR
T3 with your phone.
Enter the passkey: 0000
Select OK.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
When your MOTOROKR T3 successfully pairs
and connects with your phone or music
device, the main indicator light flashes purple
and blue.
TEST AND USE
●
To verify handsfree calling operation,
dial the number you want to call on the
phone and press SEND key on your
phone. If your phone and MOTOROKR T3
are successfully paired, you will hear
ringing on your T3.
To verify streaming audio listening
operation, play music on your streaming
music device. If your music source and
MOTOROKR T3 are successfully paired
and connected for streaming music, you
hear music on your T3.
Before you can use your MOTOROKR T3, you
must pair (link) it with your phone and/or music
device.
Step A - ENSURE MOTOROKR T3 IS IN
PAIRING MODE
When setup is complete (step 1), your
MOTOROKR T3 is automatically placed in
Bluetooth pairing mode. The main indicator light
will be steadily lit in blue to indicate handsfree
speaker is in pairing mode.
Main Indicator Light
(steadily blue
for pairing mode)
After a few moments, your MOTOROKR T3
enters Bluetooth pairing mode.
START HERE >
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
PAIR
Your MOTOROKR T3 and
Bluetooth Device
YOU’RE FINISHED!
After you have successfully set up your
MOTOROKR T3, you don't need to repeat
these steps.
For daily use, ensure that your T3 is turned ON
and your phone and/or music device’s
Bluetooth feature is ON.
To modify T3 configuration settings, you can
reenter setup mode by pressing and holding
the Power and Call buttons when powering
up.
To use the T3 with your FM car radio, see
“Using With Your FM Car Radio” on the
reverse side.
To check your T3’s battery charge level while
turned on and not on a call, you can by
pressing and holding both Volume buttons
until you hear a beep (about 5 seconds) The
main indicator light displays charge status
for a few seconds (see “Indicator Light” on
reverse side for details).
To charge your T3, see “Charging Battery”
on the reverse side for details.
To use your MOTOROKR T3, you must turn on
the Bluetooth feature in your phone or music
device.
For most Motorola phones:
1 Press M (Menu ) > Settings > Connection >
Bluetooth Link > Setup.
2 Scroll to Power.
3 Select Change.
4 Scroll to On.
5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
If the handsfree speaker is not pairing mode,
see TROUBLESHOOTING for help.
CHECKING BATTERY LEVEL
Step B - TURN ON BLUETOOTH FEATURE
ON YOUR DEVICE
USING YOUR
MOTOROKR
T3
See
Features and
Functions Guide
on the reverse side
for information on
using your T3
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
TROUBLESHOOTING
My MOTOROKR T3 will not enter pairing mode.
Make sure that any devices previously paired with
the T3 are turned off. If the main indicator light is
pulsing in blue, first turn off the other device, then
turn your T3 off and on. The main indicator light
becomes steadily lit in blue indicating the T3 is
now in pairing mode.
My phone/music device doesn't find my
MOTOROKR T3.
Make sure the indicator light on your T3 is on (lit in
blue) and steady when your phone/music device is
searching for devices (see step 2a).
My MOTOROKR T3 worked before but now it's
not working.
Make sure your phone/music device is on and the
Bluetooth feature is turned on in your device (see
step 2b). If the Bluetooth feature was turned off or
was turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2b) and pair
your device and T3 again (see step 2c).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
Features and
Functions Guide
TURNING MOTOROKR T3
ON AND OFF
To turn your T3 on, press and hold the
Power button until you hear the voice
prompt “Device is ready”, and the main
indicator light flash blue three times.
European Union Directives
Conformance Statement
To install the T3 in your car, first slide metal visor
clip onto T3, then secure T3 to the sun visor in
your car as shown below.
1 Press Radio button on rear of your
Power
Button
MOTOROKR T3. After a few moments,
the bezel indicator light is lit and voice
prompt states the currently set frequency
(default is “88.1MHz”).
[How do you save/confirm the new frequency?]
To turn off FM transmitter, press and hold Radio
button until the bezel indicator turns off.
When idle (not connected to a Bluetooth
device) or not active for 30 minutes, the T3
powers down automatically.
MAKING CALLS
MAKING CALLS CONTINUED
Make a voice dial call
Tap the Call button
and speak the
name after the tone
Mute or unmute a call
Tap Play/Pause
button
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
End a call
Tap the Call button
Answer a second
incoming call
Tap the Call button
Answer a call
Tap the Call button
Tap the Call button
• All other relevant EU Directives.
Ignore a call
Tap either Volume
button
End an active call and
resume a call on hold
Reject a call
Press and hold either
Volume button until
incoming call stops
ringing
Ignore a second
incoming call
Tap either Volume
button
Hereby, Motorola declares that this
product is in compliance with:
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
To do this, tap the Radio button. The T3 searches
for another clear frequency. When found, the
voice prompts states the new frequency. (For
example, if the new frequency is 96.1MHz, the
voice prompt states “96.1MHz”.)
broadcast frequency. Call and streaming
music audio is broadcast on your FM
Function
CHARGING BATTERY
Redial last call
Press and hold the
Call button for at least
2 seconds until you
hear a beep
Note: Some features are phone/network dependent.
Note: Your T3 supports both Handsfree and Headset Profiles.
Accessing call functions depends upon which profile your
phone supports. See your phone's user's guide for more
information.
Action
MAIN INDICATOR LIGHT
With the Charger Plugged In
Indicator
Status
Red
Charging (battery
level less than 80%
charge)
Yellow
Charging (battery
level more than 80%
charge)
Blue
Charging complete
Note: Some features are phone/network dependent.
When Checking Battery Level
Indicator
Red
Yellow
Green
Status
Battery at less than
10% charge
Battery at between
10% and 80% charge
Battery at more than
80% charge
MAIN INDICATOR LIGHT
With No Charger Plugged In
Indicator
Off
Three blue flashes
Steady blue
Rapid blue/purple flashes
Quick blue flash
Slow blue pulse
Slow red pulse
Slow purple pulse
Quick red flash
Slow green pulse
Status
Power off
Powering on/off
Pairing mode
Pairing successful
Incoming/outgoing call
Connected (on a call)/
Standby (not on a call)
Idle (not connected
to Bluetooth device)
Connected call muted
Low battery
Music streaming
Note: After [xx] minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
LISTENING TO MUSIC
Function
You can set the frequency used by the T3 to
broadcast calls and streaming music to your FM
car radio.
2 Turn on your car’s FM radio and tune to
Function
The above gives an example of a typical Product
Approval Number.
When your MOTOROKR T3 is connected and
operating with your phone and/or music device,
you can route call and music audio to your car’s
FM radio.
To hear calls and streaming music over your FM
car radio:
Action
Product
Approval
Number
SETTING FM CAR
RADIO FREQUENCY
To turn your T3 off, press and hold the
Power button until you hear the voice
prompt “Powering off”, and the main
indicator light flash blue three times.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your MOTOROKR T3.
USING WITH YOUR FM
CAR RADIO
INSTALLING IN CAR
Plug the Motorola charger into the charging
port on the rear of the T3.
The main indicator light turns red or yellow
when the battery is charging. It may take
up to 1 minute for the indicator light to turn
on. When the T3's battery is fully charged
(about [x] hours), the indicator light turns
green.
Action
Play/Pause music
Tap Play/Pause
button
Skip to next track
Tap Volume Up button
Skip to previous track
Tap Volume Down
button
Fast-forward track
Press and hold
Volume Up button
Rewind track
Press and hold
Volume Down button
Stop music player
Press and hold the
Play/Pause button
until you hear a beep
2 Disconnect the charger.
Note: T3 is not functional while charging.
BEZEL INDICATOR LIGHT
With No Charger Plugged In
Indicator
Off
On
Status
FM transmitter off
FM transmitter on
Note: After [xx] minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
AUDIO TONES
Audio Tone
Ascending tone
Two descending tones
Four ascending tones
Four descending tones
Three ascending tones
Three descending tones
Two short tones when
pressing Volume button
Status
Powering on
Powering off
Charger connected
Charger disconnected
Connected call
Disconnected call
Volume at minimum
or maximum
AUDIO TONES (CONTINUED)
Audio Tone
Series of ascending tones
Series of descending
tones
Two rapid ascending
tones
Two rapid descending
tones
Two short tones when
pressing Volume Up
button when music
playing
Two short tones when
pressing Volume Down
button when music
playing
High/low tones
repeated every 60 sec.
No audio indications;
deteriorating quality
Status
Volume increasing
Volume decreasing
Mute enabled
Mute disabled
Track forward
Track backward
Low battery
Out of range
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Page Count : 5 Creator : Adobe Illustrator(R) 12.0 For : Rick Lazier, Harbor Light Communications Create Date : 6/4/2007 8:46 AM Bounding Box : -482 62 1061 744 Container Version : 9 Creator Version : 12 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:c534b93e-f1af-415f-a3f5-c6c69cfe2274 Producer : Adobe PDF library 7.77 Creator Tool : Adobe Illustrator CS2 Modify Date : 2007:09:07 16:36:06+08:00 Metadata Date : 2007:09:07 16:36:06+08:00 Thumbnail Width : 256 Thumbnail Height : 116 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16161 bytes, use -b option to extract) Document ID : uuid:2DBDF3B2A112DC1184ADC2F7E3FF26BA Instance ID : uuid:3530902d-ea1b-4632-9906-8f9c5415e0c0 Derived From Instance ID : uuid:2CBDF3B2A112DC1184ADC2F7E3FF26BA Derived From Document ID : uuid:2BBDF3B2A112DC1184ADC2F7E3FF26BA Format : application/pdf Title : 9503a46o_FrontEXIF Metadata provided by EXIF.tools