Motorola Solutions 89FT4853 T7100 and T7200 User Manual 6864110R94
Motorola Solutions, Inc. T7100 and T7200 6864110R94
Contents
- 1. Users Manual
- 2. Amended User Manual
- 3. GMRS Lic Information
Amended User Manual
6864110R94.book Page 0 Friday, February 8, 2002 2:34 PM @6864110R94@ 6864110R94-O Models T7100 and T7200 010730-O 6864110R94.book Page 1 Friday, February 8, 2002 2:34 PM 6864110R94.book Page 2 Friday, February 8, 2002 2:34 PM Introduction Congratulations on your purchase of a Motorola Product! Product registration is an important step toward enjoying your new Motorola Product. Registering helps us facilitate warranty service, and permits us to contact you should your Motorola Product require an update or other service. Registration is not required for warranty coverage. To register your product on-line, visit www.motorola.com/ warranty/radios. Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status. Product Specifications Frequency Channels UHF 462.550-467.7250 MHz 22 T7100 30 T7200 Codes 38 CTCSS Channel Spacing 12.5/25kHz Consumer selectable when FCC permits Power Source 1 NiMH Battery pack or 4 AA Alkaline 6864110R94.book Page 3 Friday, February 8, 2002 2:34 PM Motorola, the Stylized M Logo, and all other trademarks indicated as such herein are trademarks of Motorola, Inc. â Reg. U.S. Pat. & Tm. Off. © 2002 Motorola, Inc. All rights reserved. Printed in the U.S.A. Motorola Consumer Products Division 1705 Belle Meade Court Lawrenceville, GA 30043 For a copy of a large-print version of this guide, or for product-related questions, please call the following numbers: 1-800-353-2729 (U.S.A.) 1-800-461-4575 (Canada) 1-888-390-6456 TTY (Text Telephone) On the web, please refer to the following url: www.motorola.com/talkabout 6864110R94.book Page 4 Friday, February 8, 2002 2:34 PM ContentsContents Contents Safety and General Information . . . . 1 FCC Licensing Information . . . . . . . 9 Getting Started . . . . . . . . . . . . . . . . 11 Turning On/Off Your Radio . . . . . . . 11 Diagram of Your Radio’s Display . . 12 Installing Batteries . . . . . . . . . . . . . 13 Charging . . . . . . . . . . . . . . . . . . . . . 15 Diagram of Your New Talkabout . . 18 Operating Your T7000-Series Radio 19 Talking Range . . . . . . . . . . . . . . . . 19 Changing Your Radio’s Settings . . . 20 Accessing the Backlight . . . . . . . . . 21 Lock . . . . . . . . . . . . . . . . . . . . . . . . 21 Checking Monitor/ Signal Strength Indicator . . . . . . . 21 “Roger” Beeps/ Talk Confirmation Tone . . . . . . . . 22 Button Beeps . . . . . . . . . . . . . . . . . 22 Changing Settings . . . . . . . . . . . . . . 23 Setting the Channel . . . . . . . . . . . . . . . . . . . . 23 Interference Eliminator Code . . . . 23 Eavesdrop Reducer (T7200 Only) 24 Call Tone . . . . . . . . . . . . . . . . . . . 24 Microphone Gain . . . . . . . . . . . . . . 25 Hands-Free Use/VOX . . . . . . . . . . . 25 Scanning . . . . . . . . . . . . . . . . . . . . . 27 Setting the Battery Type . . . . . . . . . 28 Battery Life . . . . . . . . . . . . . . . . . . . 29 Menu Functions . . . . . . . . . . . . . . . 30 Advanced Features . . . . . . . . . . . . . 33 Selecting Bandwidth . . . . . . . . . . . . 33 Advanced Features (T7200) . . . . . . 34 Understanding Repeater Channels 34 Setting Repeater Channels . . . . . . . . . . . . . . . . . . . 35 Interference Eliminator Codes . . . 35 Scanning Repeater Channels . . . . . 36 Weather (T7200) . . . . . . . . . . . . . . . 37 Turning On Weather Channel Reception . . . . . . . . . . . 37 Setting the Weather Channel . . . . . 38 Using Accessories . . . . . . . . . . . . . . 39 Use and Care . . . . . . . . . . . . . . . . . . 41 Frequency and Code Charts . . . . . . 42 Troubleshooting . . . . . . . . . . . . . . . 45 Motorola Limited Warranty . . . . . . . 48 SAFETY AND GENERAL INFORMATION IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION READ THIS INFORMATION BEFORE USING YOUR RADIO The information provided in this document supersedes the general safety information contained in user guides published prior to July 2000. For information regarding radio use in a hazardous atmosphere please refer to the Factory Mutual (FM) Approval Manual Supplement or Instruction Card, which is included with radio models that offer this capability. Transmit and Receive Procedure Your two-way radio contains a transmitter and a receiver. To transmit (talk), you must push the Push-to-Talk button; to receive (listen), release the Push-to-Talk button. Exposure To Radio Frequency Energy Your Motorola radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy: • United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J SAFETY AND GENERAL INFORMATION 6864110R94.book Page 1 Friday, February 8, 2002 2:34 PM SAFETY AND GENERAL INFORMATION 6864110R94.book Page 2 Friday, February 8, 2002 2:34 PM • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986 • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 1999 (applicable to wireless phones only) To assure optimal radio performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures: PORTABLE RADIO OPERATION AND EME EXPOSURE Antenna Care Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations. DO NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects call quality and may cause the radio to operate at a higher power level than needed. Two-way Radio Operation When using your radio as a traditional two-way radio, hold the radio in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips. Body-worn Operation To maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a radio on your body when transmitting, always place the radio in a Motorola supplied or approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RF exposure guidelines. If you do not use one of the Motorola-supplied or approved body-worn accessories, and are not using the radio held in the normal use position, ensure the radio and its antenna are at least one inch (2.5 cm) from your body when transmitting. Data operation When using any data feature of the radio, with or without an accessory cable, position the radio and its antenna at least one inch (2.5 cm) from the body. Approved Accessories For a list of approved Motorola accessories visit our website at www.mot.com. ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. SAFETY AND GENERAL INFORMATION 6864110R94.book Page 3 Friday, February 8, 2002 2:34 PM SAFETY AND GENERAL INFORMATION 6864110R94.book Page 4 Friday, February 8, 2002 2:34 PM • • • FACILITIES To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. AIRCRAFT When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. MEDICAL DEVICES Pacemakers The Advanced Medical Technology Association recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of, the United States Food and Drug Administration. Persons with pacemakers should: • ALWAYS keep the radio more than six inches (15 centimeters) from their pacemaker when the radio is turned ON. • not carry the radio in the breast pocket. • use the ear opposite the pacemaker to minimize the potential for interference. • turn the radio OFF immediately if you have any reason to suspect that interference is taking place. Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Safety and General Use While Driving Check the laws and regulations on the use of radios in the area where you drive. Always obey them. When using your radio while driving, please: • Give full attention to driving and to the road. • Use hands-free operation, if available. • Pull off the road and park before making or answering a call if driving conditions so require. OPERATIONAL WARNINGS • FOR VEHICLES WITH AN AIR BAG Do not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle. SAFETY AND GENERAL INFORMATION 6864110R94.book Page 5 Friday, February 8, 2002 2:34 PM SAFETY AND GENERAL INFORMATION 6864110R94.book Page 6 Friday, February 8, 2002 2:34 PM • POTENTIALLY EXPLOSIVE ATMOSPHERES Turn off your radio prior to entering any area with a potentially explosive atmosphere, unless it is a radio type especially qualified for use in such areas as “Intrinsically Safe.” Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. • BLASTING CAPS AND AREAS To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signs and instructions. OPERATIONAL CAUTIONS • ANTENNAS Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. • BATTERIES All batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. BATTERY CHARGER SAFETY INSTRUCTIONS Save these Charger Instructions 1. Do not expose the charger to rain or snow. 2. Do not operate the charger if it has received a sharp blow, or has been dropped or damaged in any way. 3. Do not disassemble the charger if it has received a sharp blow, or has been dropped or damaged in any way. 4. Never alter the AC cord or plug provided with the unit. If plug will not fit the outlet, have proper outlet installed by a qualified electrician. An improper condition can result in a risk of electric shock. 5. To reduce risk of damage to cord or plug, pull the plug rather than the cord when disconnecting charger from AC receptacle. 6. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning. 7. Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electric shock, or personal injury. SAFETY AND GENERAL INFORMATION 6864110R94.book Page 7 Friday, February 8, 2002 2:34 PM SAFETY AND GENERAL INFORMATION 6864110R94.book Page 8 Friday, February 8, 2002 2:34 PM 8. Make sure that the cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress. 9. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and/or electric shock. If an extension cord must be used, make sure: • That the pins on the plug of the extension cord are the same number, size and shape as those on the plug of the charger. • That the extension cord is properly wired and in good electrical condition, and • That the cord size is18 AWG for lengths up to 100 feet, and 16 AWG for lengths up to 150 feet. 10. The supply cord of this charger cannot be replaced. If the cord is damaged, callMotorola Product Services at: 1-800-353-2729 (U. S. A.) 1-800-461-4575 (Canada) 1-888-390-6456 TTY (Text Telephone) 6864110R94.book Page 9 Friday, February 8, 2002 2:34 PM FCC Licensing Information Faxed Contact the Fax-OnDemand system at: 1-202-418-0177 Mailed Call the FCC forms hotline at: 1-800-418-FORM 1-800-418-3676 Questions regarding FCC license Contact the FCC at: 1-888-CALL-FCC 1-888-225-5322 Or: http://www.fcc.gov See the Frequency and Code Charts on page 42. For questions on determining your radio frequency, please call Motorola Product Services at: 1-800-353-2729 FCC Licensing Information Your Motorola radio operates on General Mobile Radio Service (GMRS) frequencies and is subject to the Rules and Regulations of the Federal Communications Commission (FCC). The FCC requires that all operators using General Mobile Radio FCC Service (GMRS) frequencies obtain a radio license before operating their equipment. To obtain the FCC forms please request Form 605 which includes all forms and instructions. If you wish to have the document faxed, mailed or have questions, please use the following contact information. 6864110R94.book Page 10 Friday, February 8, 2002 2:34 PM FCC Licensing Information Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform FCC transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. 10 Note: Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited. 6864110R94.book Page 11 Friday, February 8, 2002 2:34 PM Getting Started Turning On/Off Your Radio Display Normal Menu Mode Turn Knob on the top of the radio clockwise to use. Turn the Knob counterclockwise to turn the radio Off. The radio chirps and displays all feature icons that your radio has available for approximately one second. Depending upon your radio model; T7100 will have the Channel 1-22 and the Interference Eliminator Code (0-38) left on display. Previous usage dictates Interference Eliminator Code. For T7200 the Channel 1-22 and/or Repeater Channel 15 x - 22 x will be left on display. A Diagram of your New T7000-Series Radio and its Functions is on page 18. Note: The red indicator light under the antenna flashes every three seconds, unless it has been disabled as described on page 20. Getting Started Turn Knob 11 6864110R94.book Page 12 Friday, February 8, 2002 2:34 PM Diagram of Your Radio’s Display NORMAL USE FOR ALL MODELS Scan Keypad Lock Eavesdrop Reducer/Scramble (T7200 only) Signal Strength Battery Meter Weather (T7200 only) Interference Eliminator Code 1/2 Watt/Low Power Channels 8-14 Only Getting Started Channel Indicator T7200 ONLY WITH REPEATER ENABLED Scan Keypad Lock Eavesdrop Reducer/Scramble (T7200 only) Battery Meter Signal Strength Weather (T7200 only) 1/2 Watt/Low Power Channels 8-14 only Channel Indicator 12 VOX/Hands-free use with or without accessories Repeater Channel (Frequency) Indicators VOX/Hands-free use with or without accessories 6864110R94.book Page 13 Friday, February 8, 2002 2:34 PM NiMH Battery Installation Your radio uses one rechargeable Nickel-Metal Hydride Battery pack (Motorola part numbers NTN8971 or NNTN4190). These cells provide 13 hours of radio use; Based upon 5/5/90 duty cycle (5% Transmit, 5% Receive, 90% Standby). • To begin, slide the Ribbed Latch on the bottom of the radio away from the back cover, or toward the contacts. Ribbed Latch Getting Started Installing Batteries Some radio packages include a rechargeable Nickel-Metal Hydride (NiMH) battery (NTN8971 or NNTN4190), or you may use 4 AA Alkaline batteries. If you would like to obtain the battery, the charger or the Rechargeable Upgrade Kit (Accessory 53897), please call the following numbers to locate the dealer nearest you: (U.S.A.) 1-800-353-2729 (Canada) 1-800-461-4575 You may also obtain accessory items via Motorola’s Talkabout website: www.motorola.com/talkabout 13 Getting Started 6864110R94.book Page 14 Friday, February 8, 2002 2:34 PM 14 • Slide and lift the back cover off. • Position the battery with the Motorola Logo side up, and the charge contacts are facing the bottom of the radio. Insert the top of the battery into the radio and push the battery up and into the battery compartment to fit tightly into place. • Slide and snap the cover back into place AA Alkaline Batteries Installation Your radio also uses 4 AA alkaline batteries. These cells provide 22 hours of radio use; Based upon 5/5/90 duty cycle. • Push the Ribbed Latch on the bottom of the radio away from the battery door. • Slide and lift the battery door off. • Place AA batteries so that the + markings match the markings in the compartment. • Slide and snap the battery cover into place. Charging The NiMH Battery with Plug-in Charger Part No. NNTN4078 • Make sure NiMH battery (Motorola part numbers NNTN8971 or NNTN4190) is left inside the radio. Light • Make sure the radio is Off. • Plug the charger into an electric outlet. • Lift Accessory cover and plug the Charger firmly into the jack socket. Please see figure. Note: The light on the charger will glow red continuously while charging. Charge the battery overnight (16 hours) before using it for the first time. It will need up to ten (10) hours of charging thereafter. For optimum battery life, the battery must not be left charging for prolonged periods after reaching full charge. If radio is On while charging, additional time is required to charge the battery. The approved NiMH Battery-pack (NNTN8971 or NNTN4190) and Plug-in Charger (NNTN4078) are included in the T7000 Series Rechargeable Upgrade Kit (53897). The approved NiMH Battery-pack is included in the NiMH Rechargeable Battery Accessory Package (53871). Getting Started 6864110R94.book Page 15 Friday, February 8, 2002 2:34 PM 15 6864110R94.book Page 16 Friday, February 8, 2002 2:34 PM Getting Started With Standard Drop-In Charging Tray The Drop-In Charging Tray can be placed on any flat surface and provides drop-in charging convenience. • Connect Plug-in Charger and Drop-In Charging Tray by inserting the pin into the rear of Drop-In Charging Tray. The charger pin does not have to be plugged in all the way to function properly. Insert the pin as far as possible, then stop. • To charge the battery, drop the radio into the Drop-In Charging Tray with the front of the radio facing toward you. Note: The battery (Motorola part numbers NNTN8971 or NNTN4190) can be charged while inside the radio or separately. The battery’s silver contacts must face down and the Motorola Logo must face the front of Charger. The light on the Plug-in Charger will glow continuously when radio/battery is inserted. Note: Allow up to 10 hours for the battery to reach full charge. 16 Plug-in Charger NNTN4078 Pin Drop-In Charging Tray 53872 NNTN4019 6864110R94.book Page 17 Friday, February 8, 2002 2:34 PM With Rapid Drop-In Charging Tray Plug-in Charger 2585747D01 Pin Drop-In Charging Tray NNTN4075 Getting Started The Drop-In Charging Tray can be placed on any flat surface and provides drop-in charging convenience. • Connect Plug-in Charger and Drop-In Charging Tray by inserting the pin into the rear of Drop-In Charging Tray. • To charge the battery, drop the radio into the Drop-In Charging Tray with the front of the radio facing toward you. Note: The battery (Motorola part numbers NNTN8971 or NNTN4190) can be charged while inside the radio or separately. The battery’s silver contacts must face down and the Motorola Logo must face the front of Charger. The light on the Plug-in Charger will glow continuously when radio / battery is inserted. Note: Allow up to 2 hours for the battery to reach full charge. The Rapid Charger is packaged as an Accessory Kit (Part No. 53875). 17 6864110R94.book Page 18 Friday, February 8, 2002 2:34 PM Diagram of Your New Talkabout T7000 Series Radio and its Functions Indicator Light Use M to Talk Exit a menu Getting Started Use B to Transmit Call Tone Use G to Turn on Backlight (short press) Press and hold to switch between Weather Mode & Twoway Mode (T7200 only) Microphone 18 Speaker Use P (Power) to Turn power On/Off Adjust volume to talk on your radio Use [ and ] to Scroll through menu settings Change Channels Accessory cover/flap Use J to Turn Scan On/Off (Short press.) Monitor the Frequency (Long press.) Use \to Scroll through menus Lock the keypad (when held down & not in a menu) Operating Your T7000-Series Radio Note: The microphone is located on the front of your radio, please refer to the diagram on page 18. • Press and hold M.. • Talk two-to-three inches away from the microphone. • When you’re finished talking, release M. While transmitting, the red indicator light located just below the antenna on the left front of the radio, glows, unless the Indicator Light has been disabled as described on page 20. Talking Range Optimal Range Flat, open areas • Outdoor Medium Range Buildings or trees • Outdoor Also near residential buildings Minimal Range Dense foliage or mountains • Outdoor Also inside some buildings • Indoor Operating Your T7000-Series Radio 6864110R94.book Page 19 Friday, February 8, 2002 2:34 PM 19 Operating Your T7000-Series Radio 6864110R94.book Page 20 Friday, February 8, 2002 2:34 PM 20 Changing Your Radio’s Settings through Button Combinations Note: The following table lists the functions you can set by pressing and holding specific key combinations while turning your radio to the On position: P. Key(s) Pressed Function \ M Reset factory settings by holding down for three seconds. Enable VOX/Hands-free use without accessories. Turns “Roger” Beeps/Talk Confirmation Tone, On or Off. Turns Audible Button Beeps On or Off. Disable backlight so it lights up when pressing G. The Indicator Light is also disabled. Enable backlight so it lights up at any press of a button. The Indicator Light is also enabled. Please refer to page 21. B M Enable/Disable Repeater Channels by holding down B and Mfor three seconds. (T7200 only) J M Select bandwidth between 12.5 kHz and 25 kHz. Does not apply to Channels 8-14. Note: For more specific information regarding Menu/\Button Combinations, please refer to Menu Functions on page 30. Accessing the Backlight Your radio has a Backlight that turns On automatically any time you press a front button. The Backlight turns Off automatically five seconds after you last pressed a front button. • By pressing and holding G as you turn your radio On, you can disable the backlight. • To return to normal Backlight operation, turn your radio Off and then back On while pressing and holding G. Lock • To avoid accidentally changing radio operation, press \ for three seconds. Now you will see f. • The Lock Feature locks \, [ and ], Weather (T7200 only), and Scan functions. When the keypad is locked you can still adjust the volume, transmit M, send a Call Tone B, and monitor J (Long Press). • To unlock, press \ for three seconds. Checking Monitor/Signal Strength Indicator J allows you to listen to all activity on a Channel to tell whether the Channel is currently in use. J can also help you determine when a radio is moving out of range. • To check for Channel activity, press and hold J for three seconds, then release. You’ll hear static if the Channel is clear and w will display. To avoid interrupted conversation, wait until the Channel is clear or switch to another Channel. To stop monitoring, briefly press J and release. Operating Your T7000-Series Radio 6864110R94.book Page 21 Friday, February 8, 2002 2:34 PM 21 Operating Your T7000-Series Radio 6864110R94.book Page 22 Friday, February 8, 2002 2:34 PM 22 The w helps you determine when a radio is moving out of range by displaying a receive signal-strength value next to the w while you press and hold J. This value from 0 (weakest) through 6 (strongest) indicates the relative strength of the incoming signal. Note: Obstacles that block the signal path affect the strength of the incoming signal. “Roger” Beeps/Talk Confirmation Tone When you turn this feature On, your two-way radio transmits a unique tone when you finish transmitting. It’s like saying “Roger” or “Over” and lets others know you’re finished talking. If the person you are talking to does not hear the talk confirmation tone, you can enable it by pressing and holding ] as you turn On your radio. Now, whenever you release M, you let your friends know you’re finished talking by transmitting a “Roger” Beep tone. “Roger” Beeps will be disabled as the Default Setting. Note: To toggle the Talk Confirmation Tone feature, turn your radio Off and then back On while pressing and holding ]. Button Beeps Every time you press a button on the front of your radio, it beeps unless you turn Button Beeps Off. To turn Button Beeps Off, turn your radio On while you press and hold [.. To turn Button Beeps back On, turn the radio Off and then back On again while you press and hold [.. Button Beeps will be turned On, out of the factory. On is the Default setting. 6864110R94.book Page 23 Friday, February 8, 2002 2:34 PM Changing your Radio’s Settings Setting the Channel • Turn radio On. • Press [ or ] to select Channel. Note: The red indicator light below the antenna on the left front of the radio flashes every second when the Channel is in use. To set Repeater Channels (T7200 only), please refer to Setting Repeater Channels on page 35. Setting the Interference Eliminator Code The Interference Eliminator Code helps minimize interference by providing you with a choice of code combinations. • Turn radio On. • To set, press \ once the Code display begins to flash. • Then press [ or ] to choose the Code. • Press M to exit this menu. Note: To hear everyone on your Channel, select Interference Eliminator Code 0. You can specify a different Interference Eliminator Code for each Channel. • To set a Channel and Code combination, press [ or ] to select the Channel. • Press \and then press [ or ] to select a Code. • To exit the menu, press M. • To set another Channel and Code combination, repeat these steps. Note: To set your Repeater Interference Eliminator Code (T7200 only), please refer to Setting Repeater Interference Eliminator Codes on page 35. Changing your Radio’s Settings 23 6864110R94.book Page 24 Friday, February 8, 2002 2:34 PM Changing your Radio’s Settings \ Setting Eavesdrop Reducer (T7200 Only) 24 Your radio has the Eavesdrop Reducer feature, a scramble code that makes your transmissions sound garbled to anyone listening without the same Code. It doesn’t guarantee secrecy, but it adds an extra layer of privacy. Note: All the radios have to be set to the same Scramble Code for transmission to be clear. • • • • • • • Turn radio On. To turn the Eavesdrop Reducer feature On, press \ as needed until e is displayed. Then press [ or ] to choose the Code. Select Code 0-3. Factory Default is set on 0, which means that the feature is Off. When you exit by pressing M, radio displays e. To turn the Eavesdrop Reducer feature Off, press \ as needed until e is displayed, then select [ or ] until 0 appears. Then press M to exit. Setting the Call Tone Your radio can transmit different individual call tones to other radios in your group so you can alert the group that you want to talk to them. There are ten distinct individual call tones to choose from and you can also turn Call Tones Off by selecting Call Tone 0. Once selected, press B to transmit the Call Tone to others. 6864110R94.book Page 25 Friday, February 8, 2002 2:34 PM Microphone Gain The sensitivity of your radio’s microphone can be adjusted to fit different users or operating environments. Please refer to page 26. Hands-Free Use/VOX With Compatible VOX Accessories • Turn radio Off. • Open Accessory Cover. • Insert plug of audio accessory firmly into Accessory Jack. • Turn radio On. Radio will display: g. • Lower radio volume BEFORE placing accessory on head or in ear. • To transmit, speak into Accessory Microphone and to receive, stop talking. • VOX operation can be disabled by pressing Mor removing audio accessory. Changing your Radio’s Settings To set your Call Tone: • Turn radio On. • Press \ as needed to display: E. • You can press [ or ] to scroll through the available call tones. The radio plays a sample of each individual Call tone as you scroll through them. • The default is set on 1, or you may choose 0 -10. 25 6864110R94.book Page 26 Friday, February 8, 2002 2:34 PM is a short delay between when you start talking and the radio \ Note: There transmits. Changing your Radio’s Settings To order accessories, please refer to: www.motorola.com/talkabout Without Accessories • Enable VOX by pressing M while turning the radio On. • VOX operation can be temporarily disabled by pressing M, g will flash. • A short press of M will re-enable VOX. g will be displayed (not flashing). Note: There is a short delay between when you start talking and the radio transmits. Setting Sensitivity Level Adjusting your radio’s Sensitivity Level helps minimize the possibility of unintended noises triggering a transmission, or enhances the ability to pick up quiet voices. • Press \ as needed to display g. The radio will also display the sensitivity type you are setting: ? = Microphone Gain H = External VOX (with audio accessory) - appears if a VOXcapable audio accessory is inserted and VOX is enabled. I = Internal VOX (without accessory) - appears if internal VOX is enabled. • Select Sensitivity Level of1, 2, or 3 by using [ or ]: 3 = High Sensitivity, for quiet environments 2 = Medium Sensitivity, for most environments 1 = Low Sensitivity, for noisy environments There is a short delay between when you start talking and the radio transmits. Note: 26 6864110R94.book Page 27 Friday, February 8, 2002 2:34 PM Changing your Radio’s Settings Scanning By using J, you can monitor Channels and Codes for transmissions and lock in on the one that interests you. More importantly, you can find someone in your group who has accidentally changed Channels and is talking during your scan. You don’t have to set a new Channel or Code, the radio just resets itself temporarily to that Channel and Code and you can start talking. • To start scanning, briefly press J. Your Channel/Code screen displays h and begins to scroll through Channels. When the radio detects channel activity, it stops on that channel and displays its Channel and Code. You can talk to the person(s) transmitting without having to switch Channels by pressing M. • To stop scanning, briefly press J. If you press M while the radio is scanning, the radio will transmit on the Channel which was selected before you activated Scan. If no transmission occurs within five seconds, scanning will resume. If you want to scan channels without Interference Eliminator Codes, change the Code for your set Channel to 0 before you briefly press J. Note: To Scan Repeater Channels (T7200 only), refer to page 36. Scan Manual Advance If Scan stops on a Channel that you don’t want, briefly press ] to resume scanning for the next active Channel in the Scan List. 27 6864110R94.book Page 28 Friday, February 8, 2002 2:34 PM Scan Nuisance Delete Changing your Radio’s Settings \ If Scan continuously stops on an undesired Channel, briefly press [ . This will 28 temporarily remove the undesired Channel from being scanned. To restore the deleted Channel, turn Scan Off by pressing J, then turn Scan back On by pressing J again. Note: Your Home Channel is the Channel your radio was set to when you activated Scan. You cannot Nuisance Delete your Home Channel. Editing Scan List Scan List is changed by pressing \until h displays. • The flashing Channel will appear on the display with a flashing Y or n. • Press [ or ] to increase or decrease the Channel. • Pressing J will change the Scan List to include Y or exclude n that particular Channel. Note: Your home Channel will be scanned even if it is deleted from the Scan List. Setting the Battery Type Note: Battery type needs to be set when non Motorola batteries are used. However, if you use the Motorola NiMH battery, the battery type menu will not display because your radio automatically detects the type of battery. • Selecting the battery type, allows the battery meter to recognize and properly display the power usage for single-cell batteries. • First, press \ until d displays. Either A (Alkaline) or n (NiMH or NiCd rechargeable) is blinking. • Press [ or ] until your choice of A or n displays. • Then press M or \ to exit. Battery Meter The battery meter located in the upper left corner of the display indicates how much battery power you have. NiMH % 100-85 85-25 25-10 Final 10 Alkaline % 100-70 70-40 40-10 Final 10 The radio will power off when the voltage drops below a pre-determined level in order to protect the rechargeable battery. When the battery meter flashes; m, the radio chirps after releasing M and every 5 minutes. Battery Life The following chart lists the appropriate battery life during Two-way Use* for Alkaline and NiMH batteries. Battery Type Two-way Use* AA Alkaline (High Capacity) 22 Hours Motorola NiMH Battery-pack 13 Hours Changing your Radio’s Settings 6864110R94.book Page 29 Friday, February 8, 2002 2:34 PM *Two-way Use is defined as 90% standby time, 5 % talk time, and 5% receive time. Note: Use of Scan, VOX, Weather and other features may reduce Battery Life. 29 6864110R94.book Page 30 Friday, February 8, 2002 2:34 PM Changing your Radio’s Settings \ Menu Functions 30 Radio Model Press To T7100 [ or ] one time Change the Channel. Please refer to page 23. \ one time Change the Interference Eliminator Code. Please refer to page 23. \ two times Change the Call Tone (10 to choose from). Choose 0 if you want to turn Call Tone Off. Please refer to page 24. \ three times Sensitivity Level selection. Please refer to Setting Sensitivity Level on page 26. \ four times Select Y (yes) or n (no) for each Channel you want to keep or delete from your Scan List. Please refer to page 27. \ five times Choose Battery setting type A for alkaline, n for rechargeable cells. Please refer to page 28. Note: This menu will not appear if the radio detects a Motorola rechargeable pack. 6864110R94.book Page 31 Friday, February 8, 2002 2:34 PM Menu Functions Radio Model Press To T7200 [ or ] one time Change the Channel. Please refer to page 23. Can scroll through Repeater Channels after basic powerup sequence. Please refer to Setting Repeater Channels on page 35. \ one time Choose the Interference Eliminator Code. Please refer to Setting the Interference Eliminator Code on page 23. \ two times Choose Eavesdrop Reducer Code (0-3). Please refer to Setting Eavesdrop Reducer (T7200 Only) on page 24. \ three times Change the Call Tone (0-10). Please refer to Setting the Call Tone on page 24. \ four times Sensitivity Level selection. Please refer to Setting Sensitivity Level on page 26. Changing your Radio’s Settings 31 6864110R94.book Page 32 Friday, February 8, 2002 2:34 PM Changing your Radio’s Settings \ Menu Functions 32 Radio Model Press To T7200 \ five times Select Y (yes) or n (no) for each Channel you want to keep or delete from your Scan List. Please refer to Scanning on page 27. \ six times Choose Battery setting type A for alkaline, n for rechargeable cells. Please refer to page 28. Note: This menu will not appear if the radio detects a Motorola rechargeable pack. 6864110R94.book Page 33 Friday, February 8, 2002 2:34 PM Advanced Features (T7100 and T7200) Selecting Bandwidth All Channels on your T7100 and/or T7200 GMRS radios are set to 12.5 kHz out of the factory: GMRS Repeater 15 x - 22 x FRS 8-14 If repeater operation Permanently locked to 12.5 kHz is enabled. on a 1/2 watt of power. (T7200 only) You cannot change this setting. By being set to 12.5 kHz bandwidth, your radio can communicate clearly with the Motorola T6400 GMRS radio and any FRS radio in your group. You must match your radio’s bandwidth to that of the other radios in your group. To match your bandwidth to that of the GMRS radios that you want to talk to at 25 kHz, you must set your radio to 25 kHz. To do this: • Turn your radio Off. • Turn your radio back On while pressing M and J. • A triple power-up chirp will sound indicating that your radio is now set to 25 kHz bandwidth on all GMRS Channels, if Button Beeps are enabled. • Now you can talk to Motorola Talkabout Distance GMRS radios. • All Channels except 8-14 are now set to 25 kHz. Advanced Features FRS/GMRS GMRS Direct 1-7 15-22 33 6864110R94.book Page 34 Friday, February 8, 2002 2:34 PM To return to 12.5 kHz bandwidth: • Turn your radio Off. • Turn your radio back On while pressing M and J. • A single power-up chirp will sound indicating that your radio is now set to 12.5 kHz bandwidth on all Channels, if Button Beeps are enabled. Advanced Features Advanced Features (T7200) 34 Understanding Repeater Channels If you have a GMRS Repeater and wish to use it, you must set your T7200 to repeater mode. Those Channels are identified on the display by having both x in the Interference Eliminator Code area and l at the bottom right of the display. They are identified as channels 15 x - 22 x. To enable Repeater Channels on your T7200: • Turn your radio Off. • Turn your radio back On while you press and hold the M and B for 3 seconds. A unique power-up chirp will sound (if Button Beeps are enabled) indicating that your radio now has repeater capability. Now you can talk to other T7200 radios that are set to your same Repeater Channel, Interference Eliminator Code, and Eavesdrop Reducer Code. 6864110R94.book Page 35 Friday, February 8, 2002 2:34 PM Setting Repeater Channels Once you enable your Repeater Channels on your T7200: • Press ] to scroll up to Channel 15 x - 22 x, located just after Channel 22. • When you scroll to a repeater Channel, the selected Interference Eliminator Code will be displayed briefly. Then, x will appear in these digits to indicate repeater operation. l will also display when you are on a Repeater Channel. Setting Repeater Interference Eliminator Codes The Interference Eliminator Codes for GMRS Repeater Channels 15 x - 22 x and GMRS Direct Channels 15-22 are linked. This means that when you change the Code on a GMRS Repeater Channel, the Code on the equivalent GMRS Direct Channel will change as well and vice versa (i.e. If you are on Channel 15, Code 30 and you change to Code 31, then the Code will automatically change from 30 to 31 on Channel 15 x). To change your Repeater Interference Eliminator Code: • Press the ] to scroll up to any Channel between 15 x - 22 x. Advanced Features To disable Repeater Channels: • Turn your Radio Off. • Turn your radio back On while you press and hold the M and B for 3 seconds. A single power-up chirp will sound (if Button Beeps are enabled) indicating that your radio now has returned to normal Channel mode. Channels 15 x - 22 x will no longer appear on your display. 35 6864110R94.book Page 36 Friday, February 8, 2002 2:34 PM • Advanced Features • • • 36 The Interference Eliminator Code assigned to the Repeater Channel selected will show for two seconds until x replaces it. Press \ once and the Interference Eliminator Code will flash. Press ] or [ until you select an Interference Eliminator Code. Press \ again or press M. Scanning Repeater Channels If you have Repeater Channels and Scan enabled, l will display as Scan is scrolling through or landing on Channels 15 x- 22 x. Note: To enhance your radio’s performance, remove the GMRS direct or GMRS Repeater Channels that you do not plan to use from the Scan List (see page 28.) For example, it would be beneficial to remove Channel 16 from your Scan List if you are using Channel 16 x and vice versa. Your radio will talk back on the correct transmit frequency if you follow this procedure. If you need additional help, please refer to Scanning on page 27. You may also refer to Frequency and Code Charts on page 42 for more details. Weather (T7200) You can’t change the weather, but you can be prepared for it when you take your Motorola Talkabout T7200 radio with you. That's because it tunes into broadcasts by the United States National Oceanic and Atmospheric Administration (NOAA) Weather Radio and Environment Canada Weatheradio. You can listen to a Weather Channel or you can even set your radio to alert you to emergency weather broadcasts that interrupt routine broadcasts. Both NOAA and Environment Canada have transmitters located throughout the United States and Canada, respectively. These transmitters broadcast watches, forecasts, and other information 24 hours a day. Note: Service may not be available in all areas. Check with your local weather office for frequency and details, or visit www.nws.noaa.gov/nwr, (Canada: www.msc-smc.ec.gc.ca/cd/factsheets/wxradio). The use of the NOAA logo does not provide an endorsement or implied endorsement by NOAA's National Weather Service nor does the use of the Weatheradio logo provide an endorsement or implied endorsement by Environment Canada. Whenever you listen to a Weather Channel, you cannot use your radio for two-way communications. However, a weather alert will notify you while the radio is in twoway mode (if you have enabled weather alert) and the radio is On but not transmitting or receiving. Turning On Weather Channel Reception To turn on Weather Channel Reception, press and hold G. To turn off Weather Channel Reception and return to two-way mode, press and hold G again. Advanced Features 6864110R94.book Page 37 Friday, February 8, 2002 2:34 PM 37 Advanced Features 6864110R94.book Page 38 Friday, February 8, 2002 2:34 PM 38 Setting the Weather Channel Your radio receives eight frequencies. See the Weather Frequency Chart on page 43. for a complete list. • After turning on the weather broadcast, press [ or ] to select the strongest Channel. As with two-way radio reception, Weather Channel Reception depends on how close you are to a transmitter and whether you are indoors or outdoors. Also, because Weather Channels are transmitted without Codes, they may contain static or noise. Note: In some isolated areas, it may not be possible to receive Weather Channel Transmissions. To Set Weather Alert: • Switch to weather mode, • press \ once, and • press [ or ] to select Y (On). • If you activate Weather Alert and return to two-way mode, owill display. Note: The Talkabout T7200 two-way radios are designed to be two-way radios primarily, with the added utility of features such as Weather Alert. The radio uses the same circuitry for both two-way radio and weather alert receptions. Therefore, you can miss a weather alert while you are engaged in two-way communication (either transmitting or receiving). To ensure that you do not miss a weather alert, leave the radio in the Weather Mode. 6864110R94.book Page 39 Friday, February 8, 2002 2:34 PM Using Accessories Swivel Belt Holster Your radio includes a Swivel Belt Holster for your convenience, which allows both plug-in and drop-in charging. • Slide the bottom of the radio into the holster until it snaps into place. • To remove, push the tab above the battery door and pull the radio from the holster. In case of loss, please contact your point-of-sale or call 1-800-353-2729 and request replacement part number NNTN4106AR. Remote Speaker Microphone Lapel-mounted speaker/microphone provides hands-on, Push-To-Talk control for low profile radio operation without removing the radio from belt or carry case. Ear-piece with Push-To-Talk Microphone Discreet, lightweight ear-piece with hand-operated lapel or collar-mounted microphone. It allows clear communication without disturbance or interference. Using Accessories Make sure the radio is turned Off before plugging audio accessories into the accessory port. Before you place an accessory on your head or in your ear, turn the volume down. To order accessories, please refer to: www.motorola.com/talkabout. Ear-piece with Boom Microphone Discreet, lightweight ear-piece which fits comfortably around the ear while boom microphone allows for remote radio placement and is VOX/Hands-free compatible. 39 6864110R94.book Page 40 Friday, February 8, 2002 2:34 PM Headset with Swivel Boom Microphone Comfortable, lightweight headset that is VOX/Hands-free compatible. Earbud Discreet, lightweight ear-piece which fits comfortably inside the ear allows clear message reception without disturbing others or when noise would interfere. Flexible Ear Receiver Lightweight ear-piece which fits comfortably and securely around the ear. Using Accessories Face Plate 40 Attaching Face Plate Removing Radio Face Plate • Turn the radio Off. • Turn the radio Off. • To attach radio face plate, insert face plate tabs into slots aligning face place with the appropriate buttons. • To remove radio face plate, press top tab and gently pull up on both SIDES of the bezel. • • Snap into place. Pick it up and off the keypad. 6864110R94.book Page 41 Friday, February 8, 2002 2:34 PM Use and Care XXX Use a soft damp cloth to Do not immerse in water. clean the exterior. Do not use alcohol or cleaning solutions. Turn it Off and remove batteries. Use and Care If the radio gets wet... Dry with soft cloth. Do not use until completely dry. 41 6864110R94.book Page 42 Friday, February 8, 2002 2:34 PM Frequency and Code Charts Frequency and Code Charts The charts on these pages provide frequency and code compatibility information. These charts are useful when using Motorola Talkabout two-way radios with other GMRS and FRS radios. 42 Transmit Transmit Receive T7100 T7200 Code Frequency Power Frequency Channel Channel Display (MHz) (Watts) (MHz) 10 11 12 13 14 15 16 17 18 10 11 12 13 14 15 16 17 18 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 467.6625 467.6875 467.7125 462.5500 462.5750 462.6000 462.6250 0.5 0.5 0.5 0.5 0.5 0.5 0.5 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 467.6625 467.6875 467.7125 462.5500 462.5750 462.6000 462.6250 Description FRS 1/GMRS Interstitial 1 FRS 2/GMRS Interstitial 2 FRS 3/GMRS Interstitial 3 FRS 4/GMRS Interstitial 4 FRS 5/GMRS Interstitial 5 FRS 6/GMRS Interstitial 6 FRS 7/GMRS Interstitial 7 FRS 8 FRS 9 FRS 10 FRS 11 FRS 12 FRS 13 FRS 14 GMRS Primary 1 GMRS Primary 2 GMRS Primary 3 GMRS Primary 4 6864110R94.book Page 43 Friday, February 8, 2002 2:34 PM 19 20 21 22 19 20 21 22 15 x 16 x 17 x 18 x 19 x 20 x 21 x 22 x 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 0-38 462.6500 462.6750 462.7000 462.7250 467.5500 467.5750 467.6000 467.6250 467.6500 467.6750 467.7000 467.7250 462.6500 462.6750 462.7000 462.7250 462.5500 462.5750 462.6000 462.6250 462.6500 462.6750 462.7000 462.7250 Description GMRS Primary 5 GMRS Primary 6 GMRS Primary 7 GMRS Primary 8 GMRS Repeater 1 GMRS Repeater 2 GMRS Repeater 3 GMRS Repeater 4 GMRS Repeater 5 GMRS Repeater 6 GMRS Repeater 7 GMRS Repeater 8 Weather Frequency Chart (T7200 Only) WX1 162.550 WX5 162.450 WX2 162.400 WX6 162.500 WX3 162.475 WX7 162.525 WX4 162.425 WX8 163.275 Frequency and Code Charts Transmit Transmit Receive T7100 T7200 Code Power Frequency Channel Channel Display Frequency (MHz) (Watts) (MHz) 43 6864110R94.book Page 44 Friday, February 8, 2002 2:34 PM Carrier squelch (0) disables Interference Eliminator Codes. This allows you to monitor all activity on the Channel you are using. Interference Eliminator Codes help minimize interference by providing you with a choice of code combinations. Frequency and Code Charts Interference Eliminator Codes 44 Code Hz Freq Code Hz Freq Code Hz Freq 67.0 14 107.2 27 167.9 71.9 15 110.9 28 173.8 74.4 16 114.8 29 179.9 77.0 17 118.8 30 186.2 79.7 18 123.0 31 192.8 82.5 19 127.3 32 203.5 85.4 20 131.8 33 210.7 88.5 21 136.5 34 218.1 91.5 22 141.3 35 225.7 10 94.8 23 146.2 36 233.6 11 97.4 24 151.4 37 241.8 38 250.3 12 100.0 25 156.7 13 103.5 26 162.2 6864110R94.book Page 45 Friday, February 8, 2002 2:34 PM Symptom Try This: No power Reposition or replace Alkaline batteries. Recharge or replace NiMH battery. Message not transmitted Make sure M is completely pressed as you transmit. Reposition, replace, or recharge batteries. Hearing other Confirm Interference Eliminator Code is set. noises or conversation on Shared Channel or Interference Eliminator Code may be in use, try another. a Channel Message scrambled (T7200) Eavesdrop Reducer Code is On, or setting does not match other radios’ settings; all radios must use the same Eavesdrop Reducer Code. Limited talk range Steel and/or concrete structures, heavy foliage, use in buildings or vehicles decrease range. Check for clear line of sight to improve transmission. Wearing radio close to body such as in a pocket or on a belt decreases range. Change location of radio. Troubleshooting Troubleshooting 45 Troubleshooting 6864110R94.book Page 46 Friday, February 8, 2002 2:34 PM 46 Symptom Try This: Message not received Confirm radios have the same Channel and Interference Eliminator Code settings. Make sure M is NOT being pressed while trying to listen. Reposition, replace, or recharge batteries. Obstructions and operating indoors, or in vehicles, may interfere -- change location. Heavy static or interference Radios are too close, they must be at least five feet apart. Radios are too far apart or obstacles interfering with transmission. Keypad locked Make sure keypad is unlocked. Unlock by pressing \ for three seconds. Low batteries Recharge or replace NiMH battery. Replace AA batteries. Extreme operating temperatures affect battery life. 6864110R94.book Page 47 Friday, February 8, 2002 2:34 PM Symptom Try This: Difficulty talking from T7100 or T7200 to FRS Change to Channels 8-14 or move closer together. radio on Channels 1-7. Low battery meter reading although new batteries are installed Verify that the radio is set to the correct battery type. Cannot activate VOX Feature not set and On. You can also increase the Sensitivity Level. Please refer to Setting Sensitivity Level on page 26. Troubleshooting Audio sounds muffled/ Check with the person you are talking to and make sure your excessively soft bandwidth matches (12.5 kHz or 25 kHz). See Selecting or distorted/ Bandwidth on page 33. excessively loud. 47 6864110R94.book Page 48 Friday, February 8, 2002 2:34 PM Motorola Limited Warranty Motorola Personal Communications Products and Accessories Purchased in the United States and Canada Motorola Limited Warranty I. What This Warranty Covers Defects in materials and workmanship in the following new “Products” manufactured, sold or certified by Motorola, with which this limited warranty is included in/on the package: (a) wireless cellular telephones, pagers and two-way radios that operate via “Personal Radio Service” (such as Family Radio Service and General Mobile Radio Service), together with software imbedded in any of these products, and (b) subject to the following exceptions, accessories or software sold for use with these products. • Battery Exception. This limited warranty extends only to batteries in which the fully-charged capacity falls below 80% of rated capacity and batteries that leak; • Software Exceptions. This limited warranty extends only to physical defects in the media (such as CD-ROM) that tangibly embodies each copy of any software sold and/or certified by Motorola for use with Products. Software that is not tangibly embodied in media and that is purchased separately from Products (such as software that is downloaded from the internet) comes “as is” and without warranty. II. What the Period of Coverage Is Subject to the following exceptions, one year from the date the Products are purchased by the first end-user: 48 • • • 90-Day Warranty Exception. The warranty is for 90 days for: (a) any software tangibly embodied in media or (b) any accessories for two-way radios that are covered by this warranty, as described in Section I, above. Limited Lifetime Warranty Exception. The warranty is a limited lifetime warranty for the lifetime of ownership by the first end-user of the following products, only: (a) decorative covers, including bezel, PhoneWrap™ or case (any model); and (b) ear buds and boom headsets that transmit mono sound through a wire connection (this does not include ear buds or boom headsets that either transmit stereo sound or that are wireless, or both). Repair / Replacement Exception. The warranty is for the balance of the original warranty or for 90 days from the date returned and delivered to the first end-user, whichever is longer. III. Who is Covered This warranty extends to you only if you are the first end-user purchaser. IV. What We Will Do to Correct Warranty Problems At no charge to you, we have the option to repair or replace the Products that do not conform to the warranty, or to refund the Products’ purchase price. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products or parts. No software updates are provided. Motorola Limited Warranty 6864110R94.book Page 49 Friday, February 8, 2002 2:34 PM 49 6864110R94.book Page 50 Friday, February 8, 2002 2:34 PM Motorola Limited Warranty V. 50 How to Get Warranty Service PLEASE CALL US – DO NOT SHIP: USA Canada Cellular 1-800-331-6456 All Products 1-800-461-4575 Paging 1-800-548-9954 TTY (Text Telephone) FRS Radios 1-800-353-2729 1-888-390-6456 TTY (Text Telephone) 1-888-390-6456 Accessories and software -- call the number designated for the product with which they are used. You will receive instructions on how to ship the Products to Motorola or our designated resource. If instructed to ship the Products, you must ship them with freight, duties and insurance prepaid. Regardless of where you are instructed to return the Products, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider (if this Product requires subscription service); (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number. If requested, you must also return all detachable parts such as antennas, batteries and chargers. RETAIN YOUR ORIGINAL PROOF OF PURCHASE. 6864110R94.book Page 51 Friday, February 8, 2002 2:34 PM VI. What This Warranty Does Not Cover • • • • Products that are operated in combination with ancillary or peripheral equipment or software not furnished or otherwise certified by Motorola for use with the Products (“ancillary equipment”), or any damage to the Products or ancillary equipment as a result of such use. Among other things, “ancillary equipment” includes batteries, chargers, adaptors, and power supplies not manufactured or supplied by Motorola. Any of these voids the warranty. Someone other than Motorola (or its authorized service centers) tests, adjusts, installs, maintains, alters, modifies or services the Products in any way. Any of these voids the warranty. Rechargeable batteries that: (a) are charged by other than the Motorolaapproved battery charger specified for charging such batteries; (b) have any broken seals or show evidence of tampering; (c) are used in equipment other than the Product for which they are specified; or (d) are charged and stored at temperatures greater than 60 degrees centigrade. Any of these voids the warranty. Products that have: (a) serial numbers or date tags that have been removed, altered or obliterated; (b) board serial numbers that do not match each other, or board serial numbers that do not match the housing; or (c) nonconforming or non-Motorola housings or parts. Any of these voids the warranty. Motorola Limited Warranty For Products we ask you ship to us, we will ship repaired or replacement Products at our expense for the freight and insurance, but at your expense for any duties. If additional information is needed, please contact us at the telephone number listed above. 51 6864110R94.book Page 52 Friday, February 8, 2002 2:34 PM • Motorola Limited Warranty • 52 • • • Defects or damage that result from: (a) use of the Products in a manner that is not normal or customary; (b) improper operation or misuse; (c) accident or neglect such as dropping the Products onto hard surfaces; (d) contact with water, rain, extreme humidity or heavy perspiration; (e) contact with sand, dirt or the like; or (f) contact with extreme heat, or spills of food or liquid. Physical damage to the surface of the Products, including scratches, cracks or other damage to a display screen, lens or other externally exposed parts. Failure of Products that is due primarily to any communication service or signal you may subscribe to or use with the Products. Coil cords that are stretched or that have any broken modular tabs. Leased Products. Flat-rate repair rates may apply to Products not covered by this warranty. To obtain information about Products needing repairs that are not covered by this warranty, please call the telephone number previously listed. We will provide information on repair availability, rates, methods of payment, where to send the Products, etc. VII. Some Other Limitations This is Motorola’s complete warranty for the Products, and states your exclusive remedies. This warranty is given in lieu of all other express warranties. Implied warranties, including without limitation, the implied warranties of merchantability and fitness for a particular purpose, are given only if specifically required by applicable law. Otherwise, they are specifically excluded. 6864110R94.book Page 53 Friday, February 8, 2002 2:34 PM No warranty is made that the software will meet your requirements or will work in combination with any hardware or applications software products provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected. In no event shall Motorola be liable, whether in contract or tort (including negligence) for damages in excess of the purchase price of the Product, or for any indirect, incidental, special or consequential damages of any kind, or loss of revenue or profits, loss of business, loss of information or data, or other financial loss arising out of or in connection with the ability or inability to use the Products, to the full extent these damages may be disclaimed by law. VIII. Patent and Software Provisions At Motorola’s expense, we will defend you, and pay costs and damages that may be finally awarded against you, to the extent that a lawsuit is based on a claim that the Products directly infringe a United States patent. Our obligation is conditioned on: (a) you notifying us promptly in writing when you receive notice of the claim; (b) you giving us sole control of the defense of the suit and all negotiations for its settlement or compromise; and (c) should the Products become, or in Motorola's opinion be likely to become, the subject of a claim of infringement of a United States patent, you permit us, at our option and expense, either to: procure for you the right to continue Motorola Limited Warranty No warranty is made as to coverage, availability, or grade of service provided by the Products, whether through a service provider or otherwise. 53 Motorola Limited Warranty 6864110R94.book Page 54 Friday, February 8, 2002 2:34 PM 54 using the Products; replace or modify them so that they become non-infringing; or grant you a credit for such Products, as depreciated, and accept their return. The depreciation will be an equal amount per year over the lifetime of the Products, as established by Motorola. Motorola will have no liability to you with respect to any claim of patent infringement that is based upon the combination of the Products or parts furnished under this limited warranty with ancillary equipment, as defined in VI., above. This is Motorola’s entire liability with respect to infringement of patents by the Products. IX. State Law and Other Jurisdiction Rights Some states and other jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction. To obtain information on Motorola Personal Communications Products, including warranty service, accessories and optional Extended Warranties on selected Products, please call: 6864110R94.book Page 55 Friday, February 8, 2002 2:34 PM Canada All Products 1-800-461-4575 TTY (Text Telephone) 1-888-390-6456 Accessories and software -- call the telephone number designated above for the product with which they are used. DO NOT SHIP PRODUCTS TO THESE ADDRESSES – INSTEAD PLEASE CALL. To correspond with Motorola about the Products, please write us at http://www.motorola.com or at: In the USA: Motorola, Inc. 600 North U.S. Highway 45 Libertyville, IL 60048 In Canada: Motorola Canada Limited 5875 Whittle Road Mississauga, ON L4Z 2H4 Motorola Limited Warranty USA Cellular 1-800-331-6456 Paging 1-800-548-9954 FRS Radios 1-800-353-2729 TTY (Text Telephone) 1-888-390-6456 55 Motorola Limited Warranty 6864110R94.book Page 56 Friday, February 8, 2002 2:34 PM 56 Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Patent Notice This product is covered by one or more of the following United States patents. 5896277 5894292 5864752 5699006 5742484 6246866 D408396 D399821 D387758 D389158 5894592 5893027 5789098 5734975 5861850 D395882 D383745 D389827 D389139 5929825 5926514 5953640 6071640 D413022 D416252 D416893 D433001 Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. More specifically, changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this radio and should not be made. To comply with FCC requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. Note: Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited Motorola Limited Warranty 6864110R94.book Page 57 Friday, February 8, 2002 2:34 PM 57 6864110R94.book Page 67 Friday, February 8, 2002 2:34 PM Talkabout T7100/T7200 Quick Reference Function Channel Appearance Use [ or ] for 1 through 22. Interference Eliminator Code Use [ or ] for 0 through 38 Eavesdrop Reducer Use [ or ] for 1-3 or 0 for disables feature. (T7200 Only) Function Appearance Call Tone Mic Gain/ Sensitivity Level Scan List Battery Type Use [ or ] for 1 through 10 or Off = 0. Use [ or ] for 1 low, 2 medium, or 3 high. ? = Mic Gain, H = External VOX, I= Internal VOX. Use J for Y/yes or n/no for each channel. Use [ or ] for A = Alkaline n = NiMH or NiCd. 6864110R94.book Page 68 Friday, February 8, 2002 2:34 PM Talkabout T7100/T7200 Quick Reference Talkabout T7000 Series Controls. • Turn power On/Off • Adjust Volume • Talk on the radio • Exit a menu • Weather*/ Backlight • Scroll through menus • Lock Keypad • Transmit call tone [ or ] • Scroll through and select settings * T7200 Only S • Scan/Monitor Weather Mode (T7200 Only) Function Appearance Weather Channel Weather Alert Press and hold G to access. Use [ or ] for 1 through 8.. Press \once. Use [ or ] for n (off) and Y (on) 6864110R94.book Page 1 Friday, February 8, 2002 2:34 PM 6864110R94.book Page 2 Friday, February 8, 2002 2:34 PM • Up to 5-mile *Range *Range will vary based on terrain and conditions. • 22 Channels (8 GMRS + 14 FRS), each with 38 Interference Eliminator codes GMRS channels feature increased power for longer range; 14 FRS channels ensure backward compatibility with FRS two-way radios. 38 interference eliminator codes per channel help minimize interference from other groups. • Motorola Quality Shock/drop/temperature tested to meet Motorola's High standards. • Multiple Audible Call Tones • Plug-in/Drop-In Charging • Signal Strength Indicator Visual indicator lets you know when Capable other radios are heading out of • Belt Clip/Carry Holster range while you're communicating. Included • Batteries (not included) • Talk Hands-Free (VOX) Requires only 4 AA Alkaline batteries Advanced voice activation lets or 1 NiMH rechargeable battery . you talk hands-free. • Eavesdrop Reducer (T7200) • “Roger” Beep/Talk Helps enhance privacy. Confirmation Tone • 8 GMRS Repeater Channels (T7200) Signals you're done talking. • 8 Weather Channels (T7200) • Digital Audio Processing • 1-Year Limited Warranty Provides crisper audio quality. For details, call 1-800-353-2729. • Scan Easily finds Channel and Code • Nuisance Delete Manual Advance Scan Features by searching all combinations. Accessories for T7000 series Specification Chart Convenient headphones, some with Transmit Power 2 W GMRS (conducted), 0.5 W FRS hands-free talk capabilities, mesh and waterproof carry cases, and rechargeable Receiver Sensitivity 0.18uV battery packs available from your retailer Audio Output 500 mW or www.motorola.com/talkabout Receiver Technology Digital Direct Conversion - DZIF MOTOROLA, the Stylized M Logo, Note: For T7200, weather radio service may not be available in all areas. TALKABOUT, and all other trademarks Check with your local weather office for frequency and details or visit indicated as such herein are trademarks of www.nws.noaa.gov/nwr in the US or www.msc-smc.ec.gc.ca/cd/ Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. All factsheets/wxradio in Canada. The use of the NOAA logo does not other product or service names are the property provide an endorsement or implied endorsement by NOAA's National of their respective owners. © 2002 Motorola, Weather Service nor does the use of the Weatheradio logo provide an Inc. All rights reserved. Printed in Malaysia. endorsement or implied endorsement by Environment Canada. @T7000@ Motorola® Talkabout® T7000 Proof of Purchase FCC GMRS License Required WARNING CHOKING HAZARD SMALL PARTS Not for children under 3 years. This product is not intended to be used as a toy or plaything.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2002:02:08 14:48:38 Producer : Acrobat Distiller 4.05 for Windows Creator : AdobePS5.dll Version 5.2.1 Title : 6864110R94.book Modify Date : 2002:02:08 15:32:31-05:00 Page Count : 66EXIF Metadata provided by EXIF.tools