Motorola Solutions 92FT3824 MOBILE 2-WAY RADIO User Manual APX 7500 05 UG
Motorola Solutions, Inc. MOBILE 2-WAY RADIO APX 7500 05 UG
Contents
Users Manual 2
Advanced Features
English
41
The Volume knob, DIM button, Front/Rear (F/R) softkey and
Emergency button remain active on the inactive control head,
while all other controls are disabled. Emergency footswitch and
VIP inputs remain active on the inactive control head. The VIP
input control head is configurable in the CPS and VIP should be
attached to the control head selected in the CPS.
Note: Only two (2) control heads are supported in the one
active mode.
Follow the procedure below to change the command between
the two control heads.
Procedure:
Press the Menu Select button directly below F/R.
OR
Press the Menu Select button preprogrammed user button on
the keypad microphone.
Transceiver
Z1
ZONE
CHAN
PWR SQL
REMOTE
F/R
Active Radio
Non-Active Radio
Advanced Features
English
42
Contacts
This feature provides “address-book” capabilities on your radio.
Each entry corresponds to an alias (name) or ID (number) that
you use to initiate a call.
Contacts manages up to 2,500 contact entries, alphabetically
sorted according to entry alias. Each alias can have up to 5 IDs
of different call types associated with it.
Additionally, each entry, depending on context (conventional,
trunking, or phone), associates with one or more of the four
types of calls: Phone Call, Selective Call, Private Call, or Call
Alert.
Each entry within Contacts displays the following information:
•Call Alias (Name)
•Call ID (Number)
•Call Type (Icon)
•WACN ID (Astro 25 Trunking IDs only)
•System ID
Note: Your radio must be preprogrammed to allow you to
add, edit, or delete the contact entries.
Your radio also supports a maximum of 50 call lists. Each list
can store up to 100 IDs (numbers).
Note: Your radio is preprogrammed with a number of
contacts per Call Lists. Check with your dealer or
system administrator for more information.
If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Making a Private Call from Contacts
Note: Your radio must be preprogrammed to allow you to
use this feature.
Procedure:
Use the Options Menu.
1> or < to CNTS.
2Press the Menu Select button directly below CNTS to the
call list. The display shows Contact Alias.
3> or < to the required subscriber alias.
4Press the Menu Select button directly below OPTN.
5> or < to CALL and press the Menu Select button directly
below SEL.
6> or < to select the call type.
Advanced Features
English
43
7Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
8Press the PTT button to initiate the call. During the call, the
display shows the subscriber alias.
9Press and hold the PTT button to talk. The LED lights up
solid red.
OR
Release the PTT button to listen. The LED lights up solid
green.
10 If there is no voice activity for a programmed period of time,
the call ends.
OR
The call ends when it reaches the maximum ring time.
OR
Use the PTT button:
1> or < to CNTS.
2Press the Menu Select button directly below CNTS.
3> or < to the required subscriber alias.
4Press the Menu Select button directly below CNTS. The
display shows Contact Alias.
5Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
6Press the PTT button to initiate the call. During the call, the
display shows the subscriber alias.
7Press and hold the PTT button to talk. The LED lights up
solid red.
OR
Release the PTT button to listen. The LED lights up solid
yellow.
8If there is no voice activity for a preprogrammed period of
time, the call ends.
OR
The call ends when it reaches the maximum ring time.
Advanced Features
English
44
Adding a New Contact Entry
Procedure:
1> or < to CNTS.
2Press the Menu Select button directly below CNTS. The
entries are alphabetically sorted.
3> or < to {NEW CONTACT} and press the Menu Select
button directly below SEL.
4The display shows NAME. Press the Menu Select button
directly below EDIT.
Use the keypad to enter the name.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
5Press the Menu Select button directly below OK once you
have entered the name.
OR
Press the Menu Select button directly below CNCL to return
to the previous screen.
6> or < to {ADD NUMBER} and press the Menu Select button
directly below SEL. The display shows TYPE 1 <DEFAULT
TYPE>.
7Press Menu Select button directly below EDIT.
8> or < to the required channel and press the Menu Select
button directly below OK.
9> or < to NUMBER 1 and press the Menu Select button
directly below EDIT.
The display shows NUMBER 1 and a cursor appears.
Use the keypad to enter the number.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button directly below DEL to delete
any unwanted characters.
10 Press the Menu Select button directly below OK once you
have entered the number.
OR
Press the Menu Select button directly below CNCL to return
to the previous screen.
11 Press the Menu Select button directly below DONE once
you have finished.
12 The display shows <ENTRY> STORED, confirming that the
contact entry has been added.
13 The radio returns to the main Contacts screen.
Advanced Features
English
45
Deleting a Contact Entry
Procedure:
1> or < to CNTS.
2Press the Menu Select button directly below CNTS. The
entries are alphabetically sorted.
3> or < to the entry you want to delete and press the Menu
Select button directly below OPTN.
4> or < to DELETE and press the Menu Select button directly
below SEL. The display shows <ENTRY> CONFIRM DEL?.
5Select YES to delete the entry.
The display shows <ENTRY> DELETED and the radio
returns to the main screen for Contacts.
OR
Select NO to return to the main screen for Contacts.
Adding a Contact to a Call List or Phone List
Procedure:
1> or < to CNTS.
2Press the Menu Select button directly below CNTS. The
entries are alphabetically sorted.
3> or < to the entry you want to add to the call list and press
the Menu Select button directly below OPTN.
4> or < to ADD TO CALLLST or ADD TO PHONLST and
press the Menu Select button directly below SEL.
5> or < until the display shows {AVAILABLE} and press the
Menu Select button directly below ADD to add as a new
entry.
OR
> or < until the display shows <ENTRY> and its associated
number and press the Menu Select button directly below
RPLC to replace the existing entry.
6The display shows <ENTRY> ADDED, confirming the
addition of the contact to the list.
7The radio returns to the main display for Contacts.
Advanced Features
English
46
Editing a Contact in a Call List or a Phone List
Editing an Entry Alias
Procedure:
1> or < to CNTS.
2Press the Menu Select button directly below CNTS. The
entries are alphabetically sorted.
3> or < to the entry you want to edit and press the Menu
Select button directly below OPTN.
4> or < to EDIT and press the Menu Select button directly
below SEL.
5> or < to the entry alias you wish to change and press the
Menu Select button directly below EDIT.
6A cursor appears.
Use the keypad to edit the name.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
7Press the Menu Select button directly below OK once you
have finished. The display returns to the Edit Contact
screen.
8Press the Menu Select button directly below DONE to save
your changes and return to the main screen for Contacts.
Editing as Entry ID
Procedure:
1> or < to CNTS.
2Press the Menu Select button directly below CNTS. The
entries are alphabetically sorted.
3> or < to the entry you want to edit and press the Menu
Select button directly below OPTN.
4> or < to EDIT and press the Menu Select button directly
below SEL.
5> or < to the entry ID you wish to change and press the
Menu Select button directly below EDIT.
6A cursor appears.
Use the keypad to edit the number.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Advanced Features
English
47
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
7Press the Menu Select button directly below OK once you
have finished. The display returns to the Edit Contact
screen.
8Press the Menu Select button directly below DONE to save
your changes and return to the main screen for Contacts.
Editing a Call Type
Procedure:
1> or < to CNTS.
2Press the Menu Select button directly below CNTS. The
entries are alphabetically sorted.
3> or < to the entry you want to edit and press the Menu
Select button directly below OPTN.
4> or < to EDIT and press the Menu Select button directly
below SEL.
5> or < to TYPE and press the Menu Select button directly
below EDIT.
6> or < to choose from the list of call types given and press
the Menu Select button directly below OK to select.
7The display returns to the Edit Contact screen.
8Press the Menu Select button directly below DONE to save
your changes and return to the main screen for Contacts.
Advanced Features
English
48
Scan Lists
Scan lists are created and assigned to individual channels/
groups. Your radio scans for voice activity by cycling through
the channel/group sequence specified in the scan list for the
current channel/group.
Your radio can support up to 200 different scan lists. These lists
must be preprogrammed by a qualified radio technician.
Viewing a Scan List
Procedure:
1> or < to SCNL.
2Press the Menu Select button directly below SCNL.
3> or < to view the members on the list.
4Press the H to exit the current display and return to the
Home screen.
Editing the Scan List
This feature lets you change scan list members and priorities.
Note: The maximum number of members for a trunking
priority monitor scan list is 50; for a conventional scan
list, 30; and for a talkgroup scan list, 250.
Procedure:
1> or < to SCNL.
2Press the Menu Select button directly below SCNL. The
display shows the lists that can be changed.
3> or < to the entry you want to edit.
4Press the Menu Select button directly below SEL to add
and/or change the priority of the currently displayed channel
in the scan list.
OR
Press the Menu Select button directly below DEL to delete
the currently displayed channel from the scan list.
OR
Press the Menu Select button directly below RCL to view
the next member of the scan list.
5> or < to select more channels to be added or deleted.
OR
Use the keypad to go directly to additional channels to be
added or deleted.
OR
Advanced Features
English
49
Use the Mode Knob to select additional channels to be
added or deleted.
6Press H to exit scan list programming and return to the
Home screen.
See Viewing and Changing the Priority Status on page 50
for more information on how to add and/or change the priority of
the currently displayed channel in the scan list.
Changing the Scan List Status
Procedure:
1Long press the preprogrammed Scan side button.
2> or < to the member you want to edit.
3Press the 3 button or press the Menu Select button
directly below SEL once to add the currently displayed
channel to the scan list.
OR
Press the 3 button or press the Menu Select button
directly below SEL, one or more times to change the scan
list status icon of the currently displayed channel.
4> or < to select more list members whose scan status you
want to change.
OR
Use the keypad to go directly to that scan list member.
OR
Use the Mode Knob to select another scan list member.
5Press H to exit scan list programming and return to the
Home screen.
Advanced Features
English
50
Viewing and Changing the Priority Status
Procedure:
1Below the SEL, DEL, and RCL screen, press the Menu
Select button directly below SEL to view and/or change the
priority status of the currently displayed channel.
OR
Below the SEL, DEL, and RCL screen, press the 3 button or
press the Menu Select button directly below SEL, one or
more times to view and/or change the scan list status icon of
the currently displayed channel.
2A Scan icon indicates that the current channel is in the scan
list as a non-priority channel. The LED lights up solid green.
OR
A Priority-Two Channel Scan icon indicates that the current
channel is in the scan list as the Priority-Two channel. The
LED blinks green.
OR
A Priority-One Channel Scan icon indicates that the current
channel is in the scan list as the Priority-One channel. The
LED rapidly blinks green. You hear all traffic on the Priority-
One channel, regardless of traffic on non-priority channels.
OR
No icon indicates that the current channel is deleted from
the scan list.
Scan
This feature allows you to monitor traffic on different channels
by scanning a preprogrammed list of channels.
Turning Scan On or Off
Procedure:
Press the preprogrammed Scan button.
OR
Follow the procedure below.
1> or < to SCAN.
2Press the Menu Select button directly below SCAN.
3The display shows SCAN OFF if scan is disabled. Press the
Menu Select button directly below SCAN to enable scan.
OR
The display shows SCAN ON and the scan status icon if
scan is enabled. Press the Menu Select button directly
below SCAN to disable scan.
4The radio returns to the Home screen.
Advanced Features
English
51
Turning Scan On While Disregarding the Squelch
Code (Conventional Channels Only)
Procedure:
1> or < to MON.
2Press the Menu Select button directly below MON.
3The brief MONITOR ON display indicates that the radio is
disregarding the squelch code.
While scanning for activity, you can still receive fleetwide,
system-wide, dynamic regrouping, incoming telephone
interconnect and Private Conversation/Call Alert calls.
Respond to these types of calls as you would normally on the
selected channel. However, when scanning different channels
while in talkgroup scan, incoming Private Conversation/Call
Alert calls may be missed.
Transmitting While the Scan is On
Radio Programmed for Talkback Scan
Procedure:
1Press the PTT button to transmit on the channel indicated
by the display.
The radio does not begin scanning again for a predetermined
hang time after you release the PTT button, allowing the other
party to respond. If the other party responds within the hang
time, scanning does not resume until the full hang time expires
after they have finished speaking, allowing the conversation to
be completed.
To transmit on the selected channel if another channel is active,
first turn scan off by pressing the Menu Select button below
SCAN
momentarily.
Radio Programmed for Non-Talkback Scan
Procedure:
1Press the PTT button at any time to transmit on the selected
channel or fixed channel.
To make a Call Alert page, or Private Conversation call while
scanning, press either the Menu Select button directly below
PAGE
or
CALL
. The call is entered on the selected channel and
scanning is halted until the call is exited by pressing
H
or
pressing the Menu Select button below either
PAGE
or
CALL
.
Advanced Features
English
52
Deleting a Nuisance Channel
If a channel continually generates unwanted calls or noise
(termed a “nuisance” channel), you can temporarily remove the
unwanted channel from the scan list.
This capability does not apply to priority channels or the
designated transmit channel.
Procedure:
1When the radio is locked onto the channel to be deleted,
> or < to NUIS.
2Press the Menu Select button directly below NUIS.
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, do one of the
following:
•Turn scan off, then on.
OR
•Change modes.
OR
•Turn off the radio, and then turn it back on.
Nuisance mode delete can be disabled by the system
administrator.
Changing Priorities Status While Scan is On
While the radio is scanning, the dynamic priority change feature
allows you to temporarily change any channel in a scan list
(except for the Priority-One channel) to the Priority-Two
channel.
This change remains in effect until scan is turned off. Scan then
reverts to the preprogrammed (original) setting.
Procedure:
1Press the Menu Select button directly below DYNP to
change the priority of a non-priority channel in the scan list
to Priority-Two.
2Press H momentarily to exit the scan list and resume
scanning.
Advanced Features
English
53
Restoring Priorities in a Scan List
Procedure:
To restore the original channel priorities in a scan list, do one of
the following:
•Turn scan off, then on.
OR
•Change channels.
OR
•Turn off the radio, and then turn it back on.
Hang Up (HUB)
To temporarily suspend Scan Mode operation, remove the
control head from the Hang Up Box (HUB). You are allowed to
use the control head while scan is suspended. However, Priority
Member scanning is not suspended. This feature applies to all
Scan Lists and Scan Types. Scan is resumed once the control
head is returned to the holding clip and the preprogrammed
hang time has elapsed.
Note: Priority Scan List members are continuously scanned
only when the Scan List, Designated Tx Member field
is set to “Talkback” in the radio programming.
Otherwise, all scan mode operation is suspended.
Call Alert Paging
This feature allows your radio to work like a pager.
Even if other users are away from their radios, or if they are
unable to hear their radios, you can send them an individual
Call Alert page. You can also verify if a radio is active on the
system.
Depending on how your radio is programmed, when you make
an Enhanced Private Call, the radio either automatically sends
a Call Alert page if there is no answer after the maximum ring
time, OR when you press the PTT button.
Note: This feature must be preprogrammed by a qualified
radio technician.
Advanced Features
English
54
Receiving a Call Alert Page
Procedure:
When you receive a Call Alert page
1You hear four repeating alert tone and the green LED blinks.
OR
You hear one alert tone and the green LED blinks if Call
Alert Tone Auto Reset is enabled.
2The call received icons blinks and the display shows PAGE
RECEIVED.
3Press the PTT button to answer.
OR
Press any button to clear the Call Alert page.
See Making a Talkgroup Call on page 29 or Making a Private
Call (Trunking Only) on page 30 for more information.
Sending a Call Alert Page
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Procedure:
Press the preprogrammed Quick Access (One-Touch) Call
Alert Paging button to send a page to the preprogrammed ID
and proceed to Step 5 of the procedure below.
OR
Follow the procedure below.
1> or < to PAGE.
2Press the Menu Select button directly below PAGE.
3> or < to select the required ID.
4Press the PTT button to send the page.
5The display shows PAGING...<NUMBER> or <ALIAS>.
6If the call alert page is sent successfully, four highpitch tone
sounds and the display shows ACK RECEIVED.
OR
If the call alert page is not acknowledged, a low tone sounds
and the display shows NO ACKNOWLEDGE.
7The radio returns to the Home screen.
OR
Advanced Features
English
55
Press the Menu Select button directly below OK to return to
the main screen for Contacts.
OR
Follow the procedure below.
1> or < to CALL.
2Press the Menu Select button directly below CALL.
3> or < to select the required ID, press the PTT button to
initiate the call.
4If the target radio does not respond after a preprogrammed
period of time, the display shows SEND PAGE?.
5Press the Menu Select button directly below YES to send
the call alert page.
OR
Press the Menu Select button directly below NO to exit the
screen without sending the call alert page.
6The display shows PAGING...<ALIAS>.
7If the call alert page is sent successfully, a tone sounds and
the display shows ACK RECEIVED.
OR
If the call alert page is not acknowledged, a low tone sounds
and the display shows NO ACKNOWLEDGE.
8The radio returns to the Home screen.
OR
Press the Menu Select button directly below OK to return to
the main screen for Contacts.
In-Call User Alert
You can enable and disable voice transmission, if needed.
Procedure:
1Make sure you are in Home mode where the default zone
and mode are being displayed.
2> or < to scroll to the VMUT.
3Press the Menu Select button directly below VMUT.
4Press the Menu Select button directly below VMUT or the
VMut preprogrammed button again to turn the feature off
and you will be able to hear to normal dispatch calls.
Pressing the Menu Select button directly below
VMUT
or the
VMut programmed button momentarily toggles between Voice
mute on and Voice mute off.
VOICE MUTE ON
shown on the
display indicates that the radio is muted to all conventional
dispatch calls and affiliated trunking group calls.
Advanced Features
English
56
Emergency Operation
The Emergency feature is used to indicate a critical situation.
If the Orange button is preprogrammed to send an emergency
signal, this signal overrides any other communication over the
selected channel.
Your radio supports 5 Emergency modes:
•Emergency Call
•Emergency Alarm
•Emergency Alarm with Call
•Silent Emergency Alarm
•Special Considerations for Emergencies
Check with your dealer or system administrator for more
information on the programming of this feature.
Only one of the Emergency modes above can be assigned to
the preprogrammed Emergency button or the Emergency
footswitch.
Note: To exit emergency at any time, press and hold the
preprogrammed Emergency button for about a
second.
Sending an Emergency Alarm
This feature allows you to send a data transmission, which
identifies the radio sending the emergency, to the dispatcher.
Procedure:
1Press the preprogrammed Emergency button. A tone
sounds and the display alternates EMERGENCY and the
home display.
2A dispatcher acknowledgment ACK RECEIVED display
follows.
AND, Trunking Only:
A high-pitched tone indicates that the alarm has been
received by the trunked system’s central controller.
3Press and hold the emergency button or the PTT button to
return to normal operation.
Advanced Features
English
57
Sending an Emergency Call (Trunking Only)
Procedure:
1Press preprogrammed Emergency button.
2A tone sounds and the display alternates EMERGENCY and
the home display.
OR
A short low-pitched tone sounds when the selected channel
does not support emergency.
3Hold the microphone vertically 1 to 2 inches (2.0 to 2.5 cm)
from your mouth.
4Press and hold the PTT button. Speak clearly into the
microphone.
5Release the PTT to end the transmission.
6Press and hold the preprogrammed Emergency button until
a tone sounds to exit Emergency mode.
Sending an Emergency Alarm with Emergency
Call
This feature allows you to send an Emergency Alarm to another
radio. Upon acknowledgement, both radios can communicate
over a preprogrammed Emergency channel.
If the radio has both emergency call and alarm features
enabled, it automatically proceeds to the call mode after the
alarm is acknowledged.
Procedure:
1Press the preprogrammed Emergency button to activate
the emergency call/alarm feature.
2The display alternates EMERGENCY and the home display.
3A high-pitched tone sounds, indicating that the alarm has
been received by the trunked system’s central controller.
A dispatcher acknowledgment (four high-pitched tones)
follows, accompanied by an ACK RECEIVED display.
4Hold the microphone vertically 1 to 2 inches (2.0 to 2.5 cm)
from your mouth.
5Press and hold the PTT button. Speak clearly into the
microphone.
6Release the PTT to end the transmission.
7Press and hold the preprogrammed Emergency button until
a tone sounds to exit Emergency mode.
Turning the radio off also cancels the emergency state.
Advanced Features
English
58
Sending a Silent Emergency Alarm
This feature allows you to send an Emergency Alarm to another
radio without any audio or visual indicator.
Upon acknowledgement, your radio’s microphone is
automatically activated, allowing you to communicate with the
other radio without pressing the PTT button.
This activated microphone state is also known as “hot mic”.
Note: If you press the PTT button during hot mic, and
continue to press it after the hot mic duration expires,
the radio continues to transmit until you release the
PTT button.
Procedure:
1Press the preprogrammed Emergency button to activate
the silent alarm feature.
2Press and hold the emergency button until a tone sounds to
exit the silent alarm mode.
If silent emergency alarm is used with emergency call, pressing
the PTT button exits the silent mode and initiates the
emergency call.
Special Considerations for Emergencies
•If you press the emergency button while in a channel that has
no emergency capability, a low-pitched tone sounds.
•If the unit is out of the range of the system and/or the
emergency alarm is not acknowledged, a tone sounds and
the display shows NO ACKNOWLEDGE.
•If you press the emergency button, then change to a mode
that has no emergency capability, the display shows NO
EMERGENCY and a continuous low-pitched tone sounds until
a valid emergency mode is selected or until the emergency is
cancelled.
•When an emergency is active, changing to another mode
where emergency is enabled (trunked or conventional)
causes an emergency alarm and/or emergency call to be
active on the new mode.
Advanced Features
English
59
Advanced Features
Automatic Registration Service (ARS)
This feature provides an automated data application registration
for the radio. When you turn on the radio, the device
automatically registers with the server.
Data applications within the fixed network can determine the
presence of a device on the system and send data to the
device. For example: Text Messaging Service (TMS).
The Automatic Registration Service for the radio consists of two
(2) modes:
•ARS Server Mode (default mode)
•ARS Non Server Mode
Note: The default ARS mode can be changed by a qualified
radio technician using the radio’s programming
software.
Selecting or Changing ARS Mode
Procedure:
1After the zone you want is displayed, toggle until the display
shows the required channel.
OR
Press and hold > or < to CHAN.
Press the Menu Select button directly below CHAN.
The display shows the current zone is not blinking, and the
channel is blinking.
2> or < or rotate the Mode Knob to the required channel.
3In ARS Server Mode, the display shows the User Login
Indicator icon, the zone, and ARSSVR.
OR
In ARS Non-Server Mode, the display shows the User Login
Indicator icon, the zone, and NONSVR.
OR
If the channel or mode selected is unprogrammed, the
display shows UNPROGRAMMED. Repeat Step 2.
4Press H to confirm the displayed zone and channel.
Advanced Features
English
60
Accessing the User Login Feature
This feature allows you as the user to be associated with the
radio. With this association, every data application (Example:
Text Messaging Service) takes on a friendly username.
You can still send text messages without logging in as a user.
The user login feature only enables the recipient of your
message to identify you as the sender by assigning a username
to your message.
Note: Valid characters for a username entry are capital
letters (A – Z), small letters (a – z), numbers (0 – 9),
symbols (*, #, -, /), and the space character.
The maximum length for a username is eight (8)
characters. Usernames are not case sensitive in
server mode but are case sensitive in non-server
mode.
A predefined username may sometimes be invalid
because the programming software that is used to set
predefined usernames allows you to set usernames
comprising of eight (8) characters or more.
Logging In as a User
Procedure:
1> or < to USER.
2Press the Menu Select button directly below USER.
3The display shows the User Login screen.
4Press the Menu Select button directly below ID.
5A blinking cursor appears beside ID. Use the keypad to
enter a username using the keypad multi-tap function.
OR
> or < to scroll through the list of predefined usernames.
Press the Menu Select button to select a predefined
username.
OR
Press and hold > or < to scroll through the list of predefined
usernames at a fast scroll rate.
Press the Menu Select button directly below LOGN to select
a predefined username.
6If the selected predefined username has more than eight (8)
characters, or an invalid character in it, the display
momentary shows INVALID ID. Repeat Step 5.
OR
Press the Menu Select button directly below PIN.
7A blinking cursor appears beside PIN.
Enter your Personal Identification Number (PIN) number.
Advanced Features
English
61
The maximum PIN length is 4 digits. The PIN number will
appear as asterisks.
8Press the Menu Select button directly below LOGN.
9In ARS server mode, the display shows the User Login
Indicator icon, the ID, IN PPROGRESS and CNCL.
OR
In ARS non-server mode, the display shows the User Login
Indicator icon, the ID, LOGGED IN and LOGT.
In non-ARS enabled mode, the display shows OFFLINE and
LOGT.
1If the username is invalid, login fails and the user login
failure indicator (IP indicator) icon blinks. The display also
momentary shows LOGIN FAILED. Repeat step 5.
OR
If the PIN is invalid, login fails and the user login failure
indicator (IP indicator) icon blinks. The display also
momentary shows LOGIN FAILED. Repeat Step 7.
OR
Press the Menu Select button directly below CNCL to cancel
the login in progress screen and return to the initial user
login screen.
OR
Wait for the logged in confirmation screen. If the login
process is successful, the display shows the successful user
login indicator (IP indicator) icon and LOGGED IN and LOGT.
Logging Out
Once the data application registration is completed, you can log
out.
Procedure:
1> or < to LOGT.
2Press the Menu Select button directly below LOGT.
3Display shows the User Login Indicator icon and CLEAR
PRIVATE DATA?.
4Select YES to clear all your private data. The display shows
momentary PRIVATE DATA CLEARED.
OR
Select NO to keep your private data.
Note: Private data refers to all messages in the text
messaging Inbox, Draft and Sent folder. The next radio
user will be able to access your Inbox, Draft and Sent
messages if private data is not deleted.
Advanced Features
English
62
Text Messaging Service (TMS)
This feature allows you to send and receive text messages. The
maximum length of characters for a text message is 200.
There are three (3) types of text messages:
•A new text message (free form message)
•A predefined message (quick text message)
•An edited quick text message
The main menu consists of the following options:
•Inbox
•Compose
•Drafts
•Sent
Note: See Status Icons on page 18 for more details on the
TMS icons and TMS Menu Options on page 19 for
more details on each menu option.
Accessing TMS Feature
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Press the Menu Select button directly below BACK at
any time to return to the previous screen.
Procedure:
Press the preprogrammed Data Feature button or the TMS
button to access the TMS feature screen.
OR
Press and hold the preprogrammed Data Feature button or the
TMS button to access the Inbox screen.
OR
Follow the procedure below.
1> or < to TMS.
2Press the Menu Select button directly below TMS to access
the TMS feature screen.
3> or < to scroll through the main menu options.
Advanced Features
English
63
Composing and Sending a New Text Message
Note: During the uppercase and lowercase mode, multi-
tapping the keys only scrolls through the letters. For
example, A->B->C, a->b->c.
During the num lock mode, except for 1, pressing
the keypad only enters the numeric digits. Subsequent
presses of the same key inserts the same digit to the
text message (no multi-tap).
Procedure:
1> or < to TMS.
2Press the Menu Select button directly below TMS to access
the TMS feature screen.
3Press the Menu Select button directly below COMP to see
the compose options.
4Press the Menu Select button directly below NEW to
compose a new message.
5A blinking cursor appears on the Compose screen.
Use the keypad to type or edit your message.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button directly below DEL to delete
any unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
6Press the Menu Select button directly below OPTN once the
message is composed.
7> or < to SEND and press the Menu Select button directly
below SEND to send.
OR
> or < to BACK and press the Menu Select button directly
below BACK to return to Compose screen if you want to edit
the message.
8> or < to scroll through the address list and press the Menu
Select button below SEL to select the required address.
OR
> or < to {OTHER RECPNT} and press the Menu Select
button below EDIT.
A blinking cursor appears in the ENTER ADDRESS screen.
Use the keypad to type the address entry.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
Advanced Features
English
64
9Press the Menu Select button below SEND to send the
message.
OR
Press the PTT button to send the message.
10 The display shows the SEND MESSAGE screen and
SENDING MSG.
11 If the message is sent, a tone sounds and the display shows
MSG SENT.
OR
If the message is not sent, a low tone sounds and the
display shows SEND FAILED.
If the message fails to send, the radio returns you to the main
TMS screen.
Note: You can append a priority status and/or a request reply
to your message. See Using the Priority Status and
Request Reply Features on page 66 for more
information.
Note: You can also select the DRFT option to save your
message in the Drafts folder to send it at a later time.
See Accessing the Drafts Folder on page 70 for
more details.
Sending a Quick Text Message
Quick Text messages are messages that are predefined and
usually consist of messages that are used most frequently.
Each Quick Text message has a maximum length of 50
characters.
Procedure:
Press the preprogrammed Quick Text button and proceed to
Step 3.
OR
Follow the procedure below.
1> or < to TMS.
2Press the Menu Select button directly below TMS to access
the TMS feature screen.
3Press the Menu Select button directly below COMP to
access the compose options.
4> or < to LIST.
5> or < to scroll through the list of messages and press the
Menu Select button directly below SEL to select the required
message.
6The message appears on the Compose screen, with a
blinking cursor at the end of it.
Use the keypad to edit the message.
Press < to move one space to the left.
Advanced Features
English
65
Press > to move one space to the right.
Press the Menu Select button directly below DEL to delete
any unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
7Press the Menu Select button directly below OPTN.
8> or < to SEND and press the Menu Select button directly
below SEL to send the message.
9> or < to scroll through the address list and highlight the
required address.
OR
> or < to {OTHER RECPNT} and press the Menu Select
button below EDIT.
A blinking cursor appears in the ENTER ADDRESS screen.
Use the keypad to type the address entry.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
10 Press the Menu Select button below SEND to send the
message.
OR
Press the PTT button to send the message.
11 The display shows the screen and SENDING MSG.
12 If the message is sent, a tone sounds and the display shows
MSG SENT.
OR
If the message is not sent, a low tone sounds and the
display shows SEND FAILED.
If the message fails to send, the radio returns you to the main
TMS screen.
Note: You can append a priority status and/or a request reply
to your message. See Using the Priority Status and
Request Reply Features on page 66 for more
information.
Advanced Features
English
66
Using the Priority Status and Request Reply
Features
Before sending your message, you can append a priority
message and/or a request reply to your message.
Appending or Removing a Priority Status to a Text
Message
Note: The Priority Message icon on a message does not
imply that the message gets higher priority over the
other messages when it is being transmitted. It is just
an indication that can be embedded into a message to
let the receiver know that the message is important.
Procedure:
After the outgoing message is composed (see Composing and
Sending a New Text Message on page 63 for more
information):
1Press the Menu Select button directly below OPTN.
2Press the Menu Select button directly below IMPT.
The priority status icon appears beside the normal message
icon on the label bar.
3Press the Menu Select button directly below IMPT again.
The priority status icon and the normal message icon
disappear from the label bar.
Appending or Removing a Request Reply to a Text
Message
Procedure:
After the outgoing message is composed (see Composing and
Sending a New Text Message on page 63 for more
information):
1Press the Menu Select button directly below OPTN.
2Press the Menu Select button directly below RQRP.
The reply status icon appears beside the normal message
icon on the label bar.
3Press the Menu Select button directly below RQRP again.
The reply status icon and the normal message icon
disappear from the label bar.
Appending a Priority Status and a Reply Request to a
Text Message
Procedure:
After the outgoing message is composed (see Composing and
Sending a New Text Message on page 63 for more
information):
1Press the Menu Select button directly below OPTN.
2> or < to IMPT and press the Menu Select button directly
below IMPT to indicate the message as important.
AND
Advanced Features
English
67
> or < to RQRP and press the Menu Select button directly
below RQRP to request for a reply.
3The priority status and reply status icons appear beside the
normal message icon on the label bar.
Removing a Priority Status and a Reply Request from
a Text Message
When an outgoing message is indicated with priority status and
reply status icons, follow the procedure below to remove these
indicators.
Procedure:
1Press the Menu Select button directly below OPTN.
2> or < to IMPT and press the Menu Select button directly
below IMPT to remove the priority status icon.
AND
> or < to RQRP and press the Menu Select button directly
below RQRP to remove the reply status icon.
3The priority status, reply status and normal message icons
disappear from the label bar.
Managing Text Messages
Receiving a Text Message
Note: When you receive a message that is flagged with the
”Request Reply” icon, you must manually respond to
the sender that you have received the message. The
system will not automatically send back a notification
that the radio has received such message.
Procedure:
When you receive a message, press and hold the
preprogrammed Data Feature button or the TMS Feature
button to access the Inbox and go to Step3.
OR
Follow the procedure below.
1The new message icon appears and the display
momentarily shows NEW MSG.
2Press the Menu Select button directly below TMS to access
the message.
3The display shows alias or ID with the sender of the latest
received message on top.
Advanced Features
English
68
Viewing a Text Message from the Inbox
The Inbox can hold up to thirty (30) messages.
Note: > or < to read the message if fills more than one
screen.
Procedure:
Press the preprogrammed Data Feature button or the TMS
Feature button to access the TMS feature screen, and proceed
to Step 3.
OR
Press and hold the preprogrammed Data Feature button or the
TMS Feature button to access the Inbox screen and proceed to
Step 4.
OR
Follow the procedure below.
1> or < to TMS.
2Press the Menu Select button directly below TMS to access
the TMS feature screen.
3Press the Menu Select button below INBX to view Inbox
feature screen.
4The display shows alias or IDs, with the sender of the latest
received message.
While on the review message screen, press the Menu Select
button directly below
RPLY
,
DEL
, or
BACK
to access the option.
•Select
RPLY
to reply the message.
•Select
DEL
to delete the message.
•Select
BACK
to return to the previous screen.
Note: The icon at the top right corner of the screen indicates
the status of the message. See Text Messaging
Service (TMS) on page 62 for more information.
Advanced Features
English
69
Replying to a Received Text Message
Note: The original date and time stamp, address and
message content is automatically appended to the
reply message.
Procedure:
1> or < to the required aliases or ID and press the Menu
Select button below SEL to view the message.
2Press the Menu Select button directly below RPLY to reply
to a message.
3> or < to NEW and press the Menu Select button directly
below NEW.
OR
> or < to LIST and press the Menu Select button directly
below LIST for a predefined message.
OR
> or < to scroll through the list of messages and press the
Menu Select button directly below SEL to select the required
message.
4A blinking cursor appears on the screen.
OR
The predefined message appears on the Compose screen,
with a blinking cursor at the end of it.
5Use the keypad to type or edit your message.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
6Press the Menu Select button directly below OPTN once
you have finished writing the message.
7> or < to SEND and press the Menu Select button directly
below SEND to send the message.
8The display shows the Send Message screen and
SENDING MSG.
Press the Menu Select button directly below
BACK
at any time
to return to the previous screen.
Note: You can append a priority message and/or a request
reply to your message. Using the Priority Status and
Request Reply Features on page 66 for more
information.
Advanced Features
English
70
Accessing the Drafts Folder
This folder stores the messages that were saved previously.
The Drafts folder can hold up to 10 messages. The oldest draft
in the folder is deleted when the 11th message comes in.
Procedure:
1> or < to TMS.
2Press the Menu Select button directly below TMS to access
the TMS feature screen.
3> or < to DRFT and press the Menu Select button below
DRFT.
4The display shows the first draft message.
Press the Menu Select button directly below
EDIT
,
DEL
, or
BACK
to access the option.
•Select
EDIT
to edit the message before sending it.
•Select
DEL
to delete the message.
•Select
BACK
to return to the previous screen.
Managing Sent Text Messages
Once a message is sent to another radio, it is saved in the Sent
folder. The most recent sent text message is always added to
the top of the Sent list.
The Sent folder is capable of storing a maximum of ten (10) last
sent messages. When the folder is full, the oldest text message
in the folder is deleted when the 11th message comes in.
Viewing a Sent Text Message
The icon at the top right corner of the screen indicates the
status of the message. See Text Messaging Service (TMS) on
page 62 for more information.
Procedure:
Press the preprogrammed Data Feature button or the TMS
Feature button to access the TMS feature screen, and proceed
to Step 3.
OR
Follow the procedure below.
1> or < to TMS.
2Press the Menu Select button directly below TMS to access
the TMS feature screen.
3> or < to SENT and press the Menu Select button below
SENT.
Advanced Features
English
71
Press the Menu Select button directly below
OPTN
,
DEL
, or
BACK
to access the option.
•Select
OPTN
to send to the message.
•Select
DEL
to delete the message.
•Select
BACK
to return to the previous screen.
Note: The icon at the top right corner of the screen indicates
the status of the message. See Text Messaging
Service (TMS) Icons on page 18 for more information.
Sending a Sent Text Message
Procedure:
1Press the Menu Select button directly below OPTN while
viewing the message.
2> or < to SEND and press the Menu Select button directly
below SEND to send the message.
3> or < to scroll through the address list and highlight the
required address.
OR
> or < to {OTHER RECPNT} and press the Menu Select
button below EDIT.
A blinking cursor appears in the ENTER ADDRESS screen.
Use the keypad to type the address entry.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
4Press the Menu Select button below SEND or the PTT
button to send the message.
5The display shows the Send Message screen and
SENDING MSG.
6Press the Menu Select button directly below BACK to return
to the previous screen.
Note: You can append a priority message and/or a request
reply to your message. See Using the Priority Status
and Request Reply Features on page 66 for more
details.
Advanced Features
English
72
Deleting Text Messages
Procedure:
From the Inbox, Draft, or Sent screen:
1> or < to scroll through the messages.
2Press the Menu Select button directly below DEL to view the
delete options.
3Press the Menu Select button directly below CURR to delete
the current message.
OR
Press the Menu Select button directly below ALL to delete
all the messages.
Secure Operations
Secure radio operation provides the highest commercially
available level of voice security on both trunked and
conventional channels.
Unlike other forms of security, Motorola digital encryption
provides signaling that makes it virtually impossible for others to
decode any part of an encrypted message.
Managing Encryption
Note: Refer to the Key-Variable Loader (KVL) manual for
equipment connections and setup.
Loading a Single Encryption Key
Procedure:
1Attach the KVL to your radio. Upon attaching the KVL, the
radio display shows KEYLOADING.
2Press the Menu Select button below TARGET.
3Press the Menu Select button below LOAD.
4Press the Menu Select button below KEY.
5> or < to required key.
6Press the Menu Select button below LOAD to load the key
to your radio.
Advanced Features
English
73
7When the key has been loaded successfully, the radio
sounds a short tone for single-key radios.
Loading the Group Encryption Keys
Procedure:
1Attach the KVL to your radio.
2Press the Menu Select button below TARGET.
3Press the Menu Select button below LOAD.
4Press the Menu Select button below GROUP.
5> or < to required group.
6Press the Menu Select button below LOAD to load the key
to your radio.
7Your mobile radio display shows KEYLOADING when it is
loading key(s) from KVL.
8When the key has been loaded successfully, the radio
sounds an alternating tone for multikey radios.
Using the Multikey Feature
This feature allows the radio to be equipped with as many as 64
different encryption keys and supports the DES-OFB algorithm.
There are two types of multikey:
•Conventional Multikey – The encryption keys can be tied
(strapped), on a one-per-channel basis, through Customer
Programming Software. In addition, you can have operator-
selectable keys, operator-selectable keysets, and operator-
selectable key erasure. If talkgroups are enabled in
conventional, then the encryption keys are strapped to the
talkgroups.
•Trunked Multikey – If you use your radio for both
conventional and trunked applications, you have to strap your
encryption keys for trunking on a per-talkgroup or
announcement-group basis. In addition, you may strap a
different key to other features, such as dynamic regrouping,
failsoft, or emergency talkgroup. You can have operator-
selectable key erasure.
Advanced Features
English
74
Selecting an Encryption Key (Conventional Only)
Procedure:
1> or < to KEY.
2Press the Menu Select button directly below KEY. The
display shows the last user-selected and stored encryption
key, and the available menu selections.
3> or < to scroll through the encryption keys.
OR
Use the keypad to enter the number of the desired key.
4Press the Menu Select button directly below SEL to save the
newly selected key and return to the Home screen.
OR
Press H, the PTT button, or the Menu Select button directly
below EXIT to exit.
Note: If the selected key is erased, a momentary keyfail tone
sounds and the display shows KEY FAIL.
OR
If the selected key is not allowed, a momentary illegal
key tone sounds and the display shows ILLEGAL KEY.
Enabling Secure Transmission
Procedure:
1> or < to SEC and Press the Menu Select button directly
below SEC. The display shows m and the current key if
multi-key has been enabled.
2Monitor the mode to be sure it is not in use.
3Press PTT button to transmit.
Note: If the selected channel is preprogrammed for clear-
only operation – when you press the PTT button, an
invalid mode tone sounds and the display shows
CLEAR TX only.
The radio does not transmit until you disable the
secure mode.
Accessing the Secure Feature
Procedure:
1> or < to SEC.
2Press and hold the Menu Select button directly below SEC
to display Secure feature screen.
3The display shows the Secure screen.
Advanced Features
English
75
Selecting a Keyset
This feature allows you to select one or more groups of several
encryption keys from among the available keys stored in the
radio.
For example, you could have a group of three keys structured to
one keyset, and another group of three different keys structured
to another keyset; by changing keysets, you would
automatically switch from one set of keys to the other.
Every channel to which one of the original keys was tied now
has the equivalent new key instead.
Note: Press H, the PTT button, or the EXIT menu selection
to exit this menu at any time without changing the
keyset selection.
Procedure:
1> or < to KSET.
2Press the Menu Select button directly below KSET.
The display shows the last user-selected and stored keyset,
and the available keyset menu selections.
3> or < to scroll through the keysets.
OR
Use the keypad to enter the number of the desired keyset.
4Press the Menu Select button directly below SEL to save the
newly selected keyset.
5The radio exits keyset selection and returns to the Home
screen.
Erasing the Selected Encryption Keys
This feature allows you to erase all or selected encryption keys.
Procedure:
1> or < to ERAS.
2Press the Menu Select button directly below ERAS. The
display shows the last user-selected and stored encryption
key, and the available menu selections.
3> or < to the desired encryption key.
OR
Use the keypad to enter the number of the desired key.
4Press the Menu Select button directly below ALL to delete
all keys.
OR
Press the Menu Select button directly below SNGL to delete
current shown key.
OR
Press the Menu Select button directly below ABRT to abort
this screen and return to Home screen.
Advanced Features
English
76
Requesting an Over-the-Air Rekey
This feature, also known as OTAR, allows the dispatcher to
reprogram the encryption keys in the radio remotely. The
dispatcher performs the rekey operation upon receiving a rekey
request from the user.
Procedure:
1> or < to REKY.
2Press the Menu Select button directly below REKY.
3Press the PTT button to send the rekey request.
OR
Press the PTT button again, or the H or Emergency button,
to exit the feature and transmit in normal mode.
4If the rekey operation fails, a bad-key tone sounds and the
display shows REKEY FAIL.
Note: The rekey operation failure indicates that your radio
does not contain the Unique Shadow Key (USK). This
key must be loaded into the radio with the key-variable
loader (KVL) before the rekey request can be sent.
Refer to your local key management supervisor for
more information.
The Global Positioning System (GPS)
This feature uses information from the Global Positioning
System (GPS) satellites orbiting the Earth to determine the
approximate geographical location of your radio, expressed as
latitude and longitude. The availability and accuracy of this
location information (and the amount of time that it takes to
calculate it) varies depending on the environment in which you
are using the GPS feature.
For example, GPS location fixes are very difficult to obtain
indoors, in covered locations, between high buildings, or in
situations where you have not established a clear broad view of
the sky.
Understanding the GPS Feature
The GPS technology uses radio signals from earth orbiting
satellites, to establish the location co-ordinates, maximizing
your view of clear unobstructed sky is essential for optimum
performance.
Where adequate signals from multiple satellites are not
available (usually because you cannot establish a view of a
wide area of the sky), the GPS feature of your radio will not
work. Such situations include but are not limited to:
•In underground locations
•Inside of buildings, trains, or other covered vehicles
Advanced Features
English
77
•Under any other metal or concrete roof or structure
•Between tall buildings or under dense tree-cover
•In temperature extremes outside the operating limits of your
radio
Even where location information can be calculated in such
situations, it may take longer to do so, and your location
estimate may not be as accurate. Therefore, in any emergency
situation, always report your location to your dispatcher.
Note: Even where adequate signals from multiple satellites
are available, your GPS feature only provides an
approximate location, usually within 20 meters from
your actual location, but sometimes further away.
Keep in mind that the accuracy of the location information and
the time it takes to obtain it varies depending upon
circumstances, particularly the ability to receive signals from an
adequate number of satellites.
Note: The satellites used by the GPS feature are controlled
by the U.S. government and are subject to changes
implemented in accordance with the Department of
Defense GPS user policy and the Federal Radio
Navigation Plan. These changes may affect the
performance of the GPS feature on your radio.
Enhancing GPS Performance
Sometimes, the GPS feature may be unable to complete a
location calculation successfully. You then see a message
indicating that your radio cannot connect to enough visible
satellites.
To maximize the ability of your radio to determine a fix, please
note the following guidelines:
•For your initial fix, hold the radio in the face position.
•Stay in the open. The GPS feature works best where there is
nothing between your radio and a large amount of open sky.
The Outdoor Location Feature (Using GPS)
This feature allows you to determine your current location using
a location menu, as well as your current distance and bearing in
relation to another location. Radio location may be requested
and reported over-the-air.
Your radio stores up to a maximum of sixty (60) programmable
location coordinates, also known as waypoints. When the
memory is full, the next waypoints automatically replaces the
oldest waypoints in the radio.
Advanced Features
English
78
The radio also stores four (4) preprogrammed waypoints. These
coordinates cannot be deleted.
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Accessing the Outdoor Location Feature
Note: An ON menu key may be present on the location menu
if it is preprogrammed by the dealer or system
administrator.
Procedure:
1> or < to LOC.
2Press the Menu Select button directly below LOC. The
display shows LOCATION OFF <LATITUDE>.
3Press the Menu Select button directly below ON to turn on
the GPS. The display shows PREVIOUS LOC <LATITUDE>.
4> or < to check the longitude, time and date of the last
successful location fix.
5Press the Menu Select button directly below RFSH to obtain
a new location fix.
6The top line temporarily displays PLEASE WAIT while the
new location is being determined.
While the new location is being determined, the location
signal can be a solid or blinking icon.
7Once the location coordinates are fixed, the display shows
the current latitude. Toggle to see the longitude, time and
date.
The location coordinates are updated automatically every
five seconds while the location signal is present.
Programmable Waypoints Preprogrammed Waypoints
User-configurable location
coordinates.
Fixed location coordinates:
•Home
•Emergency
•Last Known Location
•Destination
Only the alias is editable, not
the coordinates.
The Home and Destination
coordinates are editable.
Coordinates can be deleted
one at a time, or all at once.
Coordinates cannot be
deleted.
Advanced Features
English
79
8Press the Menu Select button directly below EXIT to exit
the feature and return to the main screen.
OR
Press H or the PTT button (if preprogrammed) to exit this
menu.
OR
Follow the procedure below to turn off the GPS (This feature is
enabled by a qualified radio technician.):
1> or < to LOC.
2Press the Menu Select button directly below LOC. The
display shows PREVIOUS LOC <LATITUDE>.
3> or < to check the longitude, time and date of the last
successful location fix.
4Press the Menu Select button directly below OPTN.
5> or < to TURN OFF GPS (if preprogrammed).
6Press the Menu Select button directly below SEL to turn off
the GPS. The display shows LOCATION OFF.
7Press the Menu Select button directly below EXIT to exit
the feature and return to the main screen.
OR
Press H or the PTT button (if preprogrammed) to exit this
menu.
The radio also exits the menu if the emergency button is
pressed.
Saving a Waypoint
Procedure:
While in the current location display:
1Press the Menu Select button directly below OPTN.
2> or < to SAVE AS WAYPT and press the Menu Select
button directly below SEL.
3A blinking cursor appears in the screen. Use the keypad to
type the alias via multi-tap.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
4Press the Menu Select button directly below OK once you
are done.The display shows SAVED AS <WAYPOINT
NAME>.
OR
Press the Menu Select button directly below CNCL to return
to previous screen.
Advanced Features
English
80
5Press H or the PTT button (if preprogrammed) to exit this
menu.
Viewing a Saved Waypoint
Procedure:
While in the current location display:
1Press the Menu Select button directly below OPTN.
2> or < to WAYPOINTS.
3Press the Menu Select button directly below SEL.
4> or < to desired waypoint.
5Press the Menu Select button directly below OPTN. The
display shows VIEW.
6Press the Menu Select button directly below SEL.
7> or < again to view longitude, time and date the waypoint
was detected.
8Press the Menu Select button directly below BACK to return
to previous Waypoint screen.
OR
Press H or the PTT button (if preprogrammed) to exit this
menu.
Editing the Alias of a Waypoint
Procedure:
While in the current location display:
1Press the Menu Select button directly below OPTN.
2> or < to WAYPOINTS.
3Press the Menu Select button directly below SEL.
4> or < to desired waypoints.
5Press the Menu Select button directly below OPTN.
6> or < to EDIT NAME and press the Menu Select button
directly below SEL.
7A blinking cursor appears in the Edit Name screen.
Use the keypad to edit the alias.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below DEL to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
8Press the Menu Select button directly below OK once you
are done.
OR
Advanced Features
English
81
Press the Menu Select button directly below CNCL to return
to the Waypoints main screen.
9The display shows <WAYPOINT NAME> UPDATED.
10 Press H or the PTT button (if preprogrammed) to exit this
menu.
Editing the Coordinates of a Waypoint
Procedure:
While in the current location display:
1Press the Menu Select button directly below OPTN.
2> or < to WAYPOINTS and press the Menu Select button
directly below SEL.
3> or < to desired waypoints.
4Press the Menu Select button directly below OPTN.
5> or < to EDIT LOCATION and press the Menu Select
button directly below SEL.
6The first number blinks.
Press < to move to the previous number/coordinates.
Press > to move to the next number/coordinates.
Press U or D to change the North (N), South (S), East (E)
or West (W) direction.
Press the Menu Select button below EDIT to change the
number/coordinates.
7A blinking cursor appears in the EDIT LOCATION screen.
Press < to move one space to the left.
Press > to move one space to the right.
Press the Menu Select button below Del to delete any
unwanted characters.
8Press the Menu Select button directly below OK once you
are done.
OR
Press the Menu Select button directly below CNCL to return
to the previous screen.
9Press the Menu Select button directly below OK once you
are done with the new coordinates.
OR
Press the Menu Select button directly below CNCL to return
to the previous screen then skip to step 11.
10 The display shows {HOME} UPDATED and the radio returns
to the Waypoints main screen.
OR
The display shows {DESTINATION} UPDATED and the
radio returns to the Waypoints main screen.
11 Press H or the PTT button (if preprogrammed) to exit this
menu.
Advanced Features
English
82
Deleting a Single Saved Waypoint
Procedure:
While in the current location display:
1Press the Menu Select button directly below OPTN.
2> or < to WAYPOINTS.
3Press the Menu Select button directly below SEL.
4> or < to desired waypoints.
5Press the Menu Select button directly below OPTN.
OR
Press the Menu Select button directly below DEL and then
skip to step 7.
6> or < to DELETE and press the Menu Select button directly
below SEL.
7The display shows <WAYPOINT NAME> CONFIRM DEL?.
8Press the Menu Select button directly below YES to delete.
The display shows <WAYPOINT NAME> DELETED.
OR
Press the Menu Select button directly below NO to return to
previous Waypoint screen.
9Press H or the PTT button (if preprogrammed) to exit this
menu.
Deleting All Saved Waypoints
Procedure:
1Press the Menu Select button directly below OPTN.
2> or < to WAYPOINTS and press the Menu Select button
directly below SEL.
3> or < to desired waypoints and press the Menu Select
button directly below OPTN.
4> or < to DELETE ALL and press the Menu Select button
directly below SEL.
5The display shows ALL SAVED WAYP CONFIRM DEL?.
6Press the Menu Select button directly below YES to delete.
The display shows ALL SAVED WAYP DELETED.
OR
Press the Menu Select button directly below NO to return to
previous Waypoint screen.
7Press H or the PTT button (if preprogrammed) to exit this
menu.
Advanced Features
English
83
Measuring the Distance and Bearing from a Saved
Waypoint
Procedure:
While in the current location display:
1Press the Menu Select button directly below OPTN.
2> or < to DIST FRM HERE and press the Menu Select button
directly below SEL.
3> or < to the required waypoint, and press the Menu Select
button directly below SEL.
4The display shows the distance and bearing from the current
to the selected coordinates.
5Press the Menu Select button directly below BACK to return
to the previous Waypoint screen.
OR
Press H or the PTT button (if preprogrammed) to exit this
menu.
Using the Location Feature While in Emergency
Mode
When the Emergency feature is activated by pressing the
emergency button, the radio exits the Location menu and
returns to the home (default) display so that you can see which
channel the emergency signal is going out on.
However, you may re-enter the Location menu while still in
emergency mode, provided that Silent Emergency has not been
activated.
If you have turned Location off using the ON/OFF menu key, it
automatically turns back on when Emergency is activated.
If there is a solid location signal during Emergency, the current
location and the location information received is saved as
Emergency and Last Known Location waypoints, respectively.
Advanced Features
English
84
Trunking System Controls
Using the Failsoft System
The failsoft system ensures continuous radio communications
during a trunked system failure. If a trunking system fails
completely, the radio goes into failsoft operation and
automatically switches to its failsoft channel.
The failsoft condition is indicated by a faint beeping tone every
nine seconds (radio unsquelched) until the trunking system
returns to normal operation.
To continue, in Failsoft, to communicate with other talkgroups,
refer to the following procedure.
Procedure:
1Rotate the Mode Knob to change to a different repeater
frequency.
2Press the PTT button to talk, and release the button to
listen.
When the trunking system returns to normal operation, your
radio automatically leaves failsoft operation and returns to
trunked operation.
Going Out-of-Range
OUT OF RANGE when your radio goes out of the range of the
system, it can no longer lock onto a control channel.
Procedure:
1A low-pitched tone sounds.
AND/OR
The display shows the currently selected zone/channel
combination and OUT OF RANGE.
2Your radio remains in this out-of-range condition until:
It locks onto a control channel.
OR
It locks onto a failsoft channel.
OR
It is turned off.
Advanced Features
English
85
SmartZone®
The SmartZone® feature extends communications beyond the
reach of a single-trunked site (antenna location) when operating
in a SmartZone system. SmartZone units provide expanded
wide-area coverage.
SmartZone automatically switches the radio to a different site
when the current site signal becomes unacceptable. This
usually happens when the vehicle in which the radio is located
is driven out of the range of one site, and into the range of
another.
Under normal conditions, a SmartZone-enabled radio functions
invisibly to the operator. However, the operator does have some
manual controls on the Control Head – the RSSI menu entry.
This button can be used to check, or change, the SmartZone
operation.
Using Site Trunking Feature
If the zone controller loses communication with any site, that
site reverts to site trunking.
The display shows the currently selected zone/channel
combination and SITE TRUNKING.
Note: When this occurs, you can communicate only with
other radios within your trunking site.
Locking and Unlocking a Site
This feature allows your radio to lock onto a specific site and not
roam among wide-area talkgroup sites. This feature should be
used with caution, since it inhibits roaming to another site in a
wide-area system.
Procedure:
Use the preprogrammed Site Lock/Unlock button to toggle the
lock state between locked and unlocked.
OR
Follow the procedure below.
1> or < to SITE.
2Press the Menu Select button directly below SITE.
3Press the Menu Select button directly below LOCK to lock
the site.
OR
Press the Menu Select button directly below UNLK to unlock
the site.
4The radio saves the new site lock state and returns to the
Home screen.
Advanced Features
English
86
Viewing and Changing a Site
This feature allows you to view the number of the current site or
force your radio to change to a new one.
Viewing the Current Site
Procedure:
1Press the preprogrammed Site Search button.
OR
> or < to RSSI.
2The display momentarily shows the name of the current site
and its corresponding received signal strength indicator
(RSSI).
Changing the Current Site
Procedure:
1Press and hold down the preprogrammed Site Search
button.
OR
Press and hold down the Menu Select button directly below
RSSI.
2A tone sounds and the display momentarily shows
SCANNING SITE.
When the radio finds a new site, it returns to the Home screen.
Advanced Features
English
87
Trunked Announcement
The announcement capability allows you to make
announcements to the entire user group, as well as monitor
talkgroup calls and other announcements.
Announcement calls are handled in two different ways,
depending on the trunked central controller configuration. The
two types are called ruthless and non-ruthless preemption.
•Ruthless Preemption:
When a ruthless preemption announcement call is initiated,
the requesting radio begins transmitting immediately. All
associated talkgroup calls taking place on other channels are
immediately halted, and the radios are steered to the
announcement call.
Transmitting radios continue to transmit until the PTT button
is released, at which time they also unmute for the
announcement call. Individual calls (Private Conversation and
telephone interconnect) are not affected.
•Non-Ruthless Preemption:
When a non-ruthless preemption announcement is initiated,
the initiating unit receives a telephone-type busy tone,
followed by a call back when all associated talkgroup
conversations end.
Once an announcement call is pending, any attempts by
other users to initiate a talkgroup call will result in a
telephone-type busy tone. These users will not receive a call
back until the announcement call is complete.
Initiating an Announcement
If your radio has been programmed to allow announcement
calls:
Procedure:
1Press the Mode Knob to locate the announcement-group
mode.
2Press the microphone PTT button to initiate the
announcement.
Advanced Features
English
88
Utilities
Viewing Recent Calls List
This feature allows you to view the recent incoming and
outgoing call information of the following call types:
•Call Alert
•Selective Call
•Private Call
•Phone Call (Outgoing only)
Note: The radio can also be preprogrammed to log the radio
IDs associated with incoming Dispatch Calls. Check
with your dealer or system administrator for more
information.
Procedure:
1> or < to RCNT.
2Press the Menu Select button directly below RCNT to
access the Recent Calls feature screen.
3> or < to scroll through the list.
4Press the Menu Select button directly below BACK to return
to Home screen.
OR
Press H or the PTT button to return to the Home screen.
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Selecting the Power Level
You can select the power level at which your radio transmits.
The radio always turns on to the default setting.
Note: This feature must be preprogrammed by a qualified
radio technician.
Settings:
•Select LOW for a shorter transmitting distance and to
conserve power.
•Select HIGH for a longer transmitting distance.
Procedure:
Use the preprogrammed Transmit Power Level Switch to
toggle transmit power level between high and low power.
OR
Follow the procedure below.
1> or < to PWR.
2Press the Menu Select button directly below PWR.
Advanced Features
English
89
3The display shows LOW POWER and the low power icon.
OR
The display shows HIGH POWER and the high power icon.
Selecting a Radio Profile
This feature allows you to manually switch the visual and audio
settings of the radio. The display, backlight, alert tones, and
audio settings are defined according to the preprogrammed
radio settings of each radio profile.
You can have up to a maximum of twelve (12) radio profiles
programmed into your radio by a qualified radio technician.
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Procedure:
Use the preprogrammed Profile button and proceed to Step 3.
OR
Follow the procedure below.
1> or < to PRFL.
2Press the Menu Select button directly below PRFL to
access the Profiles feature screen.
3> or < to scroll through the menu selections.
4Press the Menu Select button directly below SEL to select
the required radio profile.
OR
Press the Menu Select button directly below EXIT to exit
the screen without making any changes.
5The radio returns to the Home screen. The profile name on
the Home screen indicates the current selected radio profile.
Controlling the Display Backlight
You can enable or disable the radio’s display backlight as
needed, if poor light conditions make the display difficult to read.
Depending on how your radio is preprogrammed, you can also
maintain a minimum backlight level on the radio’s display.
Procedure:
Note: Press the DIM button to toggle the backlight off or on.
OR
Press any key of the keypad, the Menu Select or
Menu Navigation buttons, or any programmable radio
controls or buttons to turn the backlight on.
Advanced Features
English
90
Turning Keypad Tones On or Off
You can enable and disable keypad tones if needed.
Procedure:
Press the preprogrammed Keypad Mute button to turn the
tones off or on.
OR
Follow the procedure below.
1> or < to MUTE.
2Press the Menu Select button directly below MUTE.
3The display momentarily shows TONES OFF, indicating that
the keypad tones are disabled.
OR
The display momentarily shows TONES ON, and a short
tone sounds, indicating that the keypad tones are enabled.
Turning Voice Mute On or Off
You can enable and disable voice muting of the affiliated
trunking talkgroup or selected conventional channel, if needed.
Procedure:
Press the preprogrammed Voice Mute button to turn the feature
off or on.
OR
Follow the procedure below.
1> or < to VMUT.
2Press the Menu Select button directly below VMUT.
3The display momentarily shows VOICE MUTE OFF, and a
short tone sounds, indicating that the feature is disabled.
OR
The display momentarily shows VOICE MUTE ON, and a
short tone sounds, indicating that the feature is enabled.
Advanced Features
English
91
Using the Time-Out Timer
This feature turns off your radio’s transmitter. You cannot
transmit longer than the preset timer setting.
If you attempt to do so, the radio automatically stops your
transmission, and you hear a talk-prohibit tone.
The timer is defaulted at 60 seconds, but it can be
preprogrammed from 3 to 120 seconds, in 15-second intervals,
or it can be disabled entirely for each radio mode, by a qualified
radio technician.
Note: You will hear a brief, low-pitched, warning tone four
seconds before the transmission times out.
Procedure:
1Hold down the PTT button longer than the preprogrammed
time. You hear a short, low-pitched warning tone, the
transmission is cut-off, and the LEDs goes out until you
release the PTT button.
2Release the PTT button. The LEDs relight and the timer
resets.
3Press the PTT button to re-transmit. The time-out timer
restarts and the red LED lights up.
Using the Conventional Squelch Operation
Features
This feature filters out unwanted calls with low signal strength or
channels that have a higher than normal background noise.
1Procedure:
> or < to SQL.
2Press the Menu Select button directly below SQL.
The display shows SQUELCH XX, where XX is the value for
the current squelch.
3Press the Menu Select button directly below “+” to increase
the squelch volume.
OR
Press the Menu Select button directly below “-” to decrease
the squelch volume.
4Press H to return to the selected channel.
Advanced Features
English
92
Analog Options
Tone Private Line (PL), Digital Private-Line (DPL), and carrier
squelch can be available (preprogrammed) per channel.
Digital Options
One or more of the following options may be preprogrammed in
your radio. Consult your dealer or system administrator for more
information.
Using the PL Defeat Feature
This feature allows you to override any coded squelch (DPL or
PL) that might be preprogrammed to a channel. The radio will
also unmute to any digital activity on a digital channel.
Procedure:
Place the preprogrammed PL Defeat switch in the PL Defeat
position. You hear any activity on the channel.
OR
The radio is muted if no activity is present.
Note: When this feature is active, the Carrier Squelch status
indicator is displayed.
Using the Digital PTT ID Feature
This feature allows you to the radio ID (number) of the radio
from whom you are currently receiving a transmission. This ID,
consisting up to a maximum of eight characters, can be viewed
by both the receiving radio and the dispatcher.
Your radio’s ID number is also automatically sent every time the
PTT button is pressed. This is a per-channel feature. For digital
voice transmissions, your radio’s ID is sent continuously during
the voice message.
Option Result
Carrier squelch (C) You hear all traffic on a channel.
PL or DPL The radio responds only to your
messages.
Option Result
Digital Carrier-
Operated
Squelch (COS)
You hear any digital traffic.
Normal Squelch You hear any digital traffic having the
correct network access code.
Selective Switch You hear any digital traffic having the
correct network access code and correct
talkgroup.
Advanced Features
English
93
Using the Smart PTT Feature (Conventional Only)
Smart PTT is a per-personality, programmable feature used in
conventional radio systems to keep radio users from talking
over other radio conversations.
When smart PTT is enabled in your radio, you cannot transmit
on an active channel.
If you try to transmit on an active smart-PTT channel, you hear
an alert tone, and the transmission is inhibited. The LED lights
up solid yellow to indicate that the channel is busy.
Three variations of smart PTT are available:
Accessing General Radio Information
Your radio contains information on the following:
•Radio Information
•IP Display
•Control Assignments
Note: If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear
the Menu Inactive Exit Tone upon feature exit.
Accessing Radio Information
This feature displays the following information of your radio:
Mode Description
Transmit Inhibit on
Busy Channel with
Carrier
You cannot transmit if any traffic is
detected on the channel.
Transmit Inhibit on
Busy Channel with
Wrong Squelch
Code
You cannot transmit on an active channel
with a squelch code or (if secure-
equipped) encryption key other than your
own. If the PL code is the same as yours,
the transmission is not prevented.
Quick-Key Override This feature can work in conjunction with
either of the two above variations. You
can override the transmit-inhibit state by
quick-keying the radio. In other words, two
PTT button presses within the
preprogrammed time limit.
•Host Version
•Model Number
•Serial Number
•ESN
•Flash Code
•Flash Size
•CH 1 – 4 Version
(depending on the number
of channel connected)
•KG (Secure Algorithm)
•Memory Size
•Tuning Version
•Processor Version
•RF Band
•Secure Version
•DSP Version
•CHIB Version
Advanced Features
English
94
Note: Press H at any time to return to the Home screen.
Procedure:
1> or < to INFO.
2Press the Menu Select button directly below INFO.
3> or < to RADIO INFO and press the Menu Select button
directly below SEL.
4The display shows the Information screen.
5> or < to scroll through the various information.
OR
Press the Menu Select button directly below BACK to return
to previous screen.
OR
Press H to exit and return to the home display.
Viewing IP Information
This feature displays the device name, IP address, and status of
your radio.
Note: The device name of your radio is preprogrammed.
Check with your dealer or system administrator for
more information.
Procedure:
Press the preprogrammed Info button and proceed to Step 3.
OR
Follow the procedure below.
1> or < to INFO.
2Press the Menu Select button directly below INFO.
3> or < to IP INFO and press the Menu Select button directly
below SEL.
4> or < to scroll through the various information.
OR
Press the Menu Select button directly below BACK to return
to previous screen.
OR
Press H to exit and return to the Home display.
•AUX CH Version
•MCHB Version
•Siren Version
Advanced Features
English
95
Viewing Control Assignments
This feature displays the programmable radio functions
assigned to the controls of your radio for the currently selected
channel.
See Programmable Features on page 6 for more information
on the various programmable features of your radio.
Procedure:
1> or < to INFO.
2Press the Menu Select button directly below INFO.
3> or < to CONTROL MAP and press the Menu Select button
directly below SEL.
4> or < to scroll through the various information.
OR
Press the Menu Select button directly below BACK to return
to previous screen.
OR
Press H to exit and return to the Home display.
Optional External Alarms (Horn and Lights)
All control heads can be equipped for external alarms (horn and
lights) that are activated when a Call Alert page, Private
Conversation call, or phone call is received.
The radio always powers up with the horn and lights feature
enabled.
Note: The horn and lights feature must be enabled by a
qualified radio technician.
Non-Permanent Horn and Lights
Procedure:
1Press the Menu Select button directly below H/L
momentarily. The last selected alarm(s) are enabled, and
the display shows the enabled alarm(s) alternating with the
selected mode, until it is turned off.
2Press the Menu Select button directly below H/L
momentarily to turn off the alarm(s). The display shows
HORN/LITES OFF.
Advanced Features
English
96
Permanent Horn and Lights
If Permanent Horn and Lights is enabled, horn and lights will
automatically be turned on when the radio powers up.
Procedure:
1Press the Menu Select button directly below H/L once to
turn off the alarm(s).
2Press the Menu Select button directly below H/L
momentarily to enable the last selected alarm(s).
The display briefly shows the enabled alarms, and then
reverts back to the selected mode.
Changing the Selected Alarms
Procedure:
1Press the Menu Select button directly below H/L until the
display shows the required alarm.
2Press the Menu Select button directly below the required
entry and the display exits to Home screen.
Press the Menu Select button directly below the entry activates
the option. Below are the selections available.
•Select
H+L
to turn on both horn and lights. The display shows
HORN/LITES ON
.
•Select
LGTS
to turn on the lights. The display shows
LIGHTS
ON
.
•Select
HORN
to turn on the horn. The display shows
HORN
ON
.
An
OFF
entry is shown at the softkey when one of the features
above is active. Selecting the
OFF
deactivates the current active
alarm.
Advanced Features
English
97
Receiving a Call While Alarms are Turned On
When you receive a call with the Alarms turned on:
Procedure:
1You hear the vehicle’s horn sounds for four seconds, and/or
the car lights turn on for 60 seconds.
2The display shows the type of call received (CALL, PAGE,
or PHONE) and the selected mode name.
The time interval can be modified by a qualified radio
technician.
Turning Off Non-Rearmable External Alarms
Procedure:
1Press the Menu Select button directly below CALL, PAGE
or PHON will turn off the external alarm(s) and place you
directly in that feature.
OR
Press the PTT button or any control-head button to turn off
the external alarm(s).
2Press the Menu Select button directly below H/L
momentarily to rearm the horn and lights feature.
The Volume Knob and the
DIM
button have no effect on the
state of the external alarm(s).
Turning Off Rearmable External Alarms
Procedure:
1Press the Menu Select button directly below CALL, PAGE
or PHON to turn off the external alarm(s) and place you
directly in that feature.
The external alarm(s) is turned off and automatically
rearmed so that when you exit the entry, the external
alarm(s) will automatically turn on.
OR
Press the PTT button or any control head button other than
the Menu Select button directly below H/L to turn off the
external alarm(s).
The external alarm(s) is turned off and automatically
rearmed so that when you exit the entry, the external
alarm(s) will automatically turn on.
OR
Press the Menu Select button directly below H/L to turn off
the external alarm(s) and exit the Horn and Lights feature.
Press the Menu Select button directly below H/L
momentarily to rearm the horn and lights feature.
The Volume knob and the
DIM
button have no effect on the
state of the external alarms.
Advanced Features
English
98
Voice Announcement
This feature enables the radio to audibly indicate the current
feature mode, Zone or Channel the user has just assigned. This
audio indicator can be customized per customer requirements.
This is typically useful when the user is in a difficult condition to
read the content shown on the display.
Each voice announcement is within a limit of three seconds
maximum. As much as 2000 unique voice announcements are
allowed in a radio. The sum total duration for all voice
announcements in a radio shall be no more than 1000 seconds.
Note: This feature must be preprogrammed by a qualified
radio technician.
The features which Voice Announcement supports are:
•Zone
•Channel
•Scan
•Monitor
•Talkaround/Direct
•Tx Inhibit
Note: Voice announcements support certain number of zone-
channel, but not all.
Seek advice from your dealer or qualified technician for
the best selections for this feature.
The two options of priority for the Voice Announcement
available are:
•High – enables the voice of the feature to announce even
when the radio is receiving calls.
•Low – disables the voice of the feature from announcing
when the radio is receiving calls.
Procedure:
You hear a voice announcement when the features below are
preprogrammed in the radio.
•The radio powers up. The radio announces the current zone
and channel it is transmiting.
•Press the preprogrammed voice announcement button
(which specifically programmed to playback the current zone
and channel). The radio announces the current zone and
channel it is transmitting.
Note: Pressing this preprogrammed playback button will
always enable the voice feature to announce in High
priority.
All the three programmable buttons at the side of the
radio support this feature.
•Change to a new zone. The radio announces the current
zone and channel it is transmiting.
Advanced Features
English
99
•Change to a new channel remaining within the current zone.
The radio announces the current channel.
•Press either the Menu Select button or preprogrammed
button of the radio to launch or terminate Scan, Monitor,
Talkaround/Direct or Transmit Inhibit. The radio announces
the corresponding feature activation or deactivation.
Helpful Tips
The following are suggestions to assist you in troubleshooting
possible operating problems.
If your radio is locked up or the display shows FAIL 01/09, turn
the radio off and then back on. If this does not correct the
condition, take the radio to a qualified radio technician for
service.
If radio operation is intermittent, check with other persons using
the system for similar problems before taking the radio in for
service. Similar problems indicate a system malfunction rather
than a radio failure.
If symptoms persist or, if your unit exhibits other problems,
contact a qualified radio technician.
The cables that connect to the rear of the radio
could have live voltage on some of their pins. Do
not remove or reconnect these cables. Only a
qualified radio technician should perform this task.
Service performed by unauthorized personnel may
cause the radio to transmit an emergency alarm
even if the unit is turned off.
!
Accessories
English
100
Accessories
Your radio is compatible with the accessories listed in this
chapter. Contact your dealer for details.
Antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 100
Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 101
Control Station. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 101
Footswitches and PTTs . . . . . . . . . . . . . . . . . . . . . . . page 102
Direct Entry Keypad and Siren . . . . . . . . . . . . . . . . . page 102
Microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 103
Motorcycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 103
Mounting Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . page 104
Power/CAN Cables . . . . . . . . . . . . . . . . . . . . . . . . . . page 104
Programming/Accessory Cables. . . . . . . . . . . . . . . . page 105
Antennas
•Roof Top, 1/4 Wave 136 – 144 MHz (HAD4006_)
•Roof Top, 1/4 Wave 144 – 152 MHz (HAD4007_)
•Roof Top, 1/4 Wave, 152 – 162 MHz (HAD4008_)
•Roof Top, 1/4 Wave, 162 – 174 MHz (HAD4009_)
•Roof Mount Wideband VHF 136/162 (HAD4016_)
•Roof Mount Wideband VHF 146/174 (HAD4017_)
•VHF Wideband 136 – 174 MHz (HAD4021_)
•3 dB Low-Profile 762 – 870 MHz (HAF4013_)
•3 dB Elevated Feed 762 – 870 MHz (HAF4014_)
•3 dB Motorcycle 762 – 870 MHz (HAF4015_)
•1/4 Wave 762 – 870 MHz (HAF4016_)
•3 dB Co-Linear 762 – 870 MHz (HAF4017_)
•3 dB Low Profile Motorcycle 762 – 870 MHz (HAF4018_)
•GPS Antenna Roof Mount (HAG4000_)
•GPS Antenna Motorcycle (HAG4001_)
•GPS Antenna Glass Mount (PMAN4001_)
•3dB, Roof Mount, 136 – 174 MHz (RAD4010AR_)
Accessories
English
101
Audio
•Standard Speaker 8 Ohm (HSN4031_)
•Standard Speaker 3.2 Ohm (HSN4032_)
•7.5 Watt Speaker (Water Resistant) (HSN4038_)
•13 Watt Speaker (Water Resistant) (HSN4040_)
•13 Watt Speaker (Motorcycle) (HSN6003_)
Control Station
•U.K. Cord (3002120F02)
•110 V Line Cord (3060665A04)
•Europe Cord (3060665A05)
• Argentina Cord (3085801L01)
•Desk Tray with Speaker (HLN6042_)
•Desk Tray Hardware (HLN7024_)
•Power Supply 15 A Mid Power (HPN4007_)
•Desktop Microphone (RMN5070_)
Accessories
English
102
Footswitches and PTTs
•PTT Footswitch Button (GLN7278_)
•External Alarm Cable (HKN4258_)
•Emergency Footswitch (HLN5113_)
•Emergency Push Button (HLN5131_)
•External Alarm Buzzer 110MA (HLN6953_)
•External Alarm Relays (HLN6969_)
•Accessory PTT (RLN5926_)
Direct Entry Keypad and Siren
•Direct Entry Keypad Siren Public Address Deck 8 Button
(H1336_)
•Direct Entry Keypad Status Message Deck 8 Button (H1338_)
•Direct Entry Keypad Status Message Deck 16 Button
(H1339_)
•Fuse Cable (HKN4265_)
•Siren Cable (HKN4363_)
•Direct Entry Keypad to O5 Control Head Cable (HKN6189_)
•Mounting Bracket (HKN6938_)
•Auxiliary Switch Panel (HLN1224_)
•Siren (HLN1439_)
•Siren Switchbox (HLN6819_)
•Round Chrome Bull Horn (TDN6251_)
•Rectangular Chrome Bull Horn (TDN6252_)
•Underhood-Grey Bull Horn (TDN6253_)
•Round-Grey Bull Horn (TDN6254_)
Accessories
English
103
Microphones
•HandSet/Hangup Armored Cable (HKN1018_)
•Motorcycle Water Resistant Microphone with DB9 Connector
(HMN1079_)
•Water Resistant Microphone (HMN1089_)
•Traditional Palm Microphone (HMN1090_)
•Keypad Microphone (HMN4079_)
•Keypad Handset (HMN4097_)
•IMPRES™ Visor Microphone (RMN5054_)
•Desktop Microphone (RMN5070_)
Motorcycle
•Motorcycle Remote Cable (3075217A01)
•Motorcycle Power Cable (HKN6032_)
•Motorcycle Enclosure, Black, U.S.A. (HLN7021_)
•Motorcycle Water Resistant Microphone with DB9 Connector
(HMN1079_)
•Motorcycle Waterproof Speaker (HSN6003_)
Accessories
English
104
Mounting Solution
•Remote Control Head Trunnion (HKN6186_)
•High Power Quick Release Trunnion with Lock (HLN7003_)
•Mid Power Key Lock (HLN6372_)
•Mid Power Trunnion (HLN7002_)
Power/CAN Cables
•10' Power Cable Dash Mount (HKN4191_)
•20' Power Cable Mid Power Remote Mount (HKN4192_)
•Motorcycle Power Cable (HKN6032_)
•100W Power Cable (HKN6110_)
•131' CAN Cable Remote Mount (HKN6164_)
•115' CAN Cable Remote Mount (HKN6165_)
•75' CAN Cable Remote Mount (HKN6166_)
•50' CAN Cable Remote Mount (HKN6167_)
•30' CAN Cable Remote Mount (HKN6168_)
•17' CAN Cable Remote Mount (HKN6169_)
•10' CAN Cable Remote Mount (HKN6170_)
•Accessory Connector for Speaker and Ignition (HLN6863_)
Accessories
English
105
Programming/Accessory Cables
•Remote Mount RS232 Cable (HKN6122_)
•RS232 Cable Kit 6' Dash Mount (HKN6160_)
•RS232 Cable Kit 20' Remote Mid Power (HKN6161_)
•USB Cable, MAP Connector (6 ft) (HKN6163_)
•USB Cable, MAP Connector (15 ft) (HKN6172_)
•Keyloader Adaptor MMP/Hirose 1.5” Cable (HKN6182_)
•RS232 MMP Cable (HKN6183_)
•USB MMP Programming Cable (HKN6184_)
•Remote Control Head Power, Speaker, Audio Headset Jacks
(HKN6187_)
•Remote Control Head Power and Speaker (HKN6188_)
•Remote Control Head VIP Connector (HKN6196_)
•Ignition Sense Cable, Dash Mount (HLN6863_)
•Remote Control Head MAP Connector (HLN6961_)
•Standard Microphone Extension Cable (PMKN4033_)
•Keyload Cable KVL3000 Plus to Hirose (TKN8531_)
Appendix: Maritime Radio Use in the VHF
English
106
Appendix: Maritime Radio Use in the
VHF Frequency Range
Take a moment to review the following:
Special Channel Assignments. . . . . . . . . . . . . . . . . . page 106
Operating Frequency Requirements. . . . . . . . . . . . . page 107
Special Channel Assignments
Emergency Channel
If you are in imminent and grave danger at sea and require
emergency assistance, use VHF Channel 16 to send a distress
call to nearby vessels and the United States Coast Guard.
Transmit the following information, in this order:
1“MAYDAY, MAYDAY, MAYDAY.”
2“THIS IS _____________________, CALL SIGN
__________.”
State the name of the vessel in distress 3 times, followed by
the call sign or other identification of the vessel, stated 3
times.
3Repeat “MAYDAY” and the name of the vessel.
4“WE ARE LOCATED AT _______________________.”
State the position of the vessel in distress, using any
information that will help responders to locate you, e.g.:
• latitude and longitude
• bearing (state whether you are using true or magnetic
north)
• distance to a well-known landmark
• vessel course, speed or destination
5 State the nature of the distress.
6Specify what kind of assistance you need.
7State the number of persons on board and the number
needing medical attention, if any.
8Mention any other information that would be helpful to
responders, such as type of vessel, vessel length and/or
tonnage, hull color, etc.
9“OVER.”
10 Wait for a response.
11 If you do not receive an immediate response, remain by the
radio and repeat the transmission at intervals until you
receive a response. Be prepared to follow any instructions
given to you.
Non-Commercial Call Channel
For non-commercial transmissions, such as fishing reports,
rendezvous arrangements, repair scheduling, or berthing
information, use VHF Channel 9.
Appendix: Maritime Radio Use in the VHF
English
107
Operating Frequency Requirements
A radio designated for shipboard use must comply with Federal
Communications Commission Rule Part 80 as follows:
• on ships subject to Part II of Title III of the Communications
Act, the radio must be capable of operating on the 156.800
MHz frequency
• on ships subject to the Safety Convention, the radio
must be capable of operating:
• in the simplex mode on the ship station transmitting
frequencies specified in the 156.025 – 157.425 MHz
frequency band, and
• in the semiduplex mode on the two frequency channels
specified in the table below.
Note: Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83
cannot be lawfully used by the general public in US
waters.
Additional information about operating requirements in the
Maritime Services can be obtained from the full text of FCC
Rule Part 80 and from the US Coast Guard.
Table A-1: VHF Marine Channel List
Channel
Number
Frequency (MHz)
Transmit Receive
1 156.050 160.650
2 156.100 160.700
* 156.150 160.750
4 156.200 160.800
5 156.250 160.850
6 156.300 –
7 156.350 160.950
8 156.400 –
9 156.450 156.450
10 156.500 156.500
11 156.550 156.550
12 156.600 156.600
13** 156.650 156.650
14 156.700 156.700
15** 156.750 156.750
16 156.800 156.800
17** 156.850 156.850
18 156.900 161.500
19 156.950 161.550
20 157.000 161.600
* 157.050 161.650
22 157.100 161.700
* 157.150 161.750
Table A-1: VHF Marine Channel List (Continued)
Channel
Number
Frequency (MHz)
Transmit Receive
Appendix: Maritime Radio Use in the VHF
English
108
* Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be
lawfully used by the general public in US waters.
** Low power (1 W) only
*** Guard band
Note: A – in the Receive column indicates that the channel is
transmit only.
24 157.200 161.800
25 157.250 161.850
26 157.300 161.900
27 157.350 161.950
28 157.400 162.000
60 156.025 160.625
* 156.075 160.675
62 156.125 160.725
63 156.175 160.775
* 156.225 160.825
65 156.275 160.875
66 156.325 160.925
67** 156.375 156.375
68 156.425 156.425
69 156.475 156.475
71 156.575 156.575
72 156.625 –
73 156.675 156.675
74 156.725 156.725
75 *** ***
76 *** ***
77** 156.875 –
Table A-1: VHF Marine Channel List (Continued)
Channel
Number
Frequency (MHz)
Transmit Receive
78 156.925 161.525
79 156.975 161.575
80 157.025 161.625
* 157.075 161.675
* 157.125 161.725
* 157.175 161.775
84 157.225 161.825
85 157.275 161.875
86 157.325 161.925
87 157.375 161.975
88 157.425 162.025
Table A-1: VHF Marine Channel List (Continued)
Channel
Number
Frequency (MHz)
Transmit Receive
Glossary
English
109
Glossary
This glossary is a list of specialized terms used in this manual.
Term Definition
ACK Acknowledgment of communication.
Active Channel A channel that has traffic on it.
Analog Signal An RF signal that has a continuous nature
rather than a pulsed or discrete nature.
ARS Automatic Registration Service
ASTRO 25
Trunking
Motorola standard for wireless digital
trunked communications.
ASTRO
Conventional
Motorola standard for wireless digital
conventional communications.
Autoscan
A feature that allows the radio to
automatically scan the members of a scan
list.
AUX CH Auxiliary Control Head
Call Alert Privately page an individual by sending an
audible tone.
Carrier Squelch
Feature that responds to the presence of
an RF carrier by opening or unmuting
(turning on) a receiver’s audio circuit. A
squelch circuit silences the radio when no
signal is being received so that the user
does not have to listen to “noise”.
Central
Controller
A software-controlled, computer-driven
device that receives and generates data for
the trunked radios assigned to it. It
monitors and directs the operations of the
trunked repeaters.
Channel
A group of characteristics such as transmit/
receive frequency pairs, radio parameters,
and encryption encoding.
CHIB Control Head Interface Board
Control Channel
In a trunking system, one of the channels
that is used to provide a continuous, two-
way/data communications path between
the central controller and all radios on the
system.
Conventional
Typically refers to radio-to-radio
communications, sometimes through a
repeater (see Trunking).
Conventional
Scan List
A scan list that includes only conventional
channels.
Term Definition
Glossary
English
110
CP Codeplug
Cursor A visual tracking marker (a blinking line)
that indicates a location on the display.
Deadlock
Displayed by the radio after three failed
attempts to unlock the radio.The radio must
be powered off and on prior to another
attempt.
Digital Private
Line (DPL)
A type of coded squelch using data bursts.
Similar to PL except a digital code is used
instead of a tone.
Digital Signal An RF signal that has a pulsed, or discrete,
nature, rather than a continuous nature.
Dispatcher An individual who has radio system
management duties.
DSP Digital Signal Processing
Dynamic
Regrouping
A feature that allows the dispatcher to
temporarily reassign selected radios to a
single special channel so they can
communicate with each other.
ESN Electrical Serial Number
Term Definition
Failsoft
A feature that allows communications to
take place even though the central
controller has failed. Each trunked repeater
in the system transmits a data word
informing every radio that the system has
gone into failsoft.
FCC Federal Communications Commission.
Hang Up Disconnect.
Home screen The first display information after the radio
completes its self test.
KVL Key-variable loader: A device for loading
encryption keys into the radio.
LCD Liquid crystal display.
LED Light-emitting diode.
Menu Entry
A software-activated feature shown at the
bottom of the display – selection of these
features is controlled by the g.
MCHB Millennium Control Head Board
Term Definition
Glossary
English
111
Monitor
Check channel activity through menu
entries. If the channel is clear, you hear
static. If the channel is in use, you hear
conversation. It also serves as a way to
check the volume level of the radio, since
the radio “opens the squelch” when the
monitor button is pressed.
Multi-System
Talkgroup Scan
List
A scan list that can include both talkgroups
(trunked) and channels (conventional).
Network Access
Code
Network Access Code (NAC) operates on
digital channels to reduce voice channel
interference between adjacent systems
and sites.
Non-Tactical/
Revert
The user talks on a preprogrammed
emergency channel. The emergency alarm
is sent out on this same channel.
OTAR Over-the-air rekeying.
Page A one-way alert, with audio and/or display
messages.
Personality A set of unique features specific to a radio.
PIN Personal Identification Number
Preprogrammed Refers to a software feature that has been
activated by a qualified radio technician.
Term Definition
Private
(Conversation)
Call
A feature that lets you have a private
conversation with another radio user in the
talkgroup.
Private Line
(PL)
A sub-audible tone that is transmitted such
that only receivers decoding the tone
receives it.
Programmable Refers to a radio control that can have a
radio feature assigned to it.
PTT
Push-To-Talk – the PTT button engages
the transmitter and puts the radio in
transmit (send) operation when pressed.
Radio
Frequency (RF)
The part of the general frequency spectrum
between the audio and infrared light
regions (about 10 kHz to 10,000,000 MHz).
Repeater
A conventional radio feature, where you
talk through a receive/transmit facility that
re-transmits received signals, in order to
improve communications range and
coverage.
Selective Call
A feature that allows you to call a select
individual, intended to provide privacy and
to eliminate the annoyance of having to
listen to conversations of no interest to you.
Term Definition
Glossary
English
112
Selective Switch
Any digital P25 traffic having the correct
Network Access Code and the correct
talkgroup.
Squelch
Special electronic circuitry, added to the
receiver of a radio, that reduces, or cuts off,
unwanted signals before they are heard in
the speaker.
Standby
An operating condition whereby the radio’s
speaker is muted but still continues to
receive data.
Status Calls
Pre-defined text messages that allow the
user to send a conditional message without
talking.
Tactical/
Non-Revert
The user talks on the channel that was
selected before the radio entered the
emergency state.
Talkaround
Bypass a repeater and talk directly to
another unit for easy local unit-to-unit
communications.
Talkgroup
An organization or group of radio users
who communicate with each other using
the same communication path.
TMS Text Messaging Service
Term Definition
Trunking
The automatic sharing of communications
paths between a large number of users
(see Conventional).
Trunking
Priority Monitor
Scan List
A scan list that includes talkgroups that are
all from the same trunking system.
USK Unique Shadow Key.
UTC
Coordinated Universal Time. The
international time standard (formerly
Greenwich Mean Time, or GMT). Zero
hours UTC is midnight in Greenwich,
England, which is located at 0 degrees
longitude. Everything east of Greenwich
(up to 180 degrees) is later in time;
everything west is earlier. There are 42
time authorities around the world that are
constantly synchronizing with each other.
Abbreviated as UTC (English backronym =
Universal Time, Coordinated), it is also
known as Zulu (Z) Time.
Zone A grouping of channels.
Term Definition
Commercial Warranty and Service
English
113
Commercial Warranty and Service
Limited Warranty
MOTOROLA COMMUNICATION PRODUCTS
I. WHAT THIS WARRANTY COVERS AND FOR HOW
LONG:
MOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA
manufactured Communication Products listed below (“Product”)
against defects in material and workmanship under normal use and
service for a period of time from the date of purchase as scheduled
below:
MOTOROLA, at its option, will at no charge either repair the
Product (with new or reconditioned parts), replace it (with a new or
reconditioned Product), or refund the purchase price of the Product
during the warranty period provided it is returned in accordance
with the terms of this warranty. Replaced parts or boards are
warranted for the balance of the original applicable warranty period.
All replaced parts of Product shall become the property of
MOTOROLA.
This express limited warranty is extended by MOTOROLA to the
original end user purchaser only and is not assignable or
transferable to any other party. This is the complete warranty for the
Product manufactured by MOTOROLA. MOTOROLA assumes no
obligations or liability for additions or modifications to this warranty
unless made in writing and signed by an officer of MOTOROLA.
Unless made in a separate agreement between MOTOROLA and
the original end user purchaser, MOTOROLA does not warrant the
installation, maintenance or service of the Product.
MOTOROLA cannot be responsible in any way for any ancillary
equipment not furnished by MOTOROLA which is attached to or
used in connection with the Product, or for operation of the Product
with any ancillary equipment, and all such equipment is expressly
excluded from this warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims liability for range,
coverage, or operation of the system as a whole under this
warranty.
II. GENERAL PROVISIONS:
This warranty sets forth the full extent of MOTOROLA'S
responsibilities regarding the Product. Repair, replacement or
refund of the purchase price, at MOTOROLA’s option, is the
exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME,
INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR
SAVINGS OR OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
APX 7500 O5 Control Head One (1) Year
Product Accessories One (1) Year
Commercial Warranty and Service
English
114
INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT
SUCH MAY BE DISCLAIMED BY LAW.
III. STATE LAW RIGHTS:
SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES
OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY
NOT APPLY.
This warranty gives specific legal rights, and there may be other
rights which may vary from state to state.
IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase
and Product item serial number) in order to receive warranty
service and, also, deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty service location.
Warranty service will be provided by MOTOROLA through one of its
authorized warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer or
communication service provider), it can facilitate your obtaining
warranty service. You can also call MOTOROLA at 1-800-927-2744
US/Canada.
V. WHAT THIS WARRANTY DOES NOT COVER:
A) Defects or damage resulting from use of the Product in other
than its normal and customary manner.
B) Defects or damage from misuse, accident, water, or neglect.
C)Defects or damage from improper testing, operation,
maintenance, installation, alteration, modification, or adjustment.
D)Breakage or damage to antennas unless caused directly by
defects in material workmanship.
E) A Product subjected to unauthorized Product modifications,
disassembles or repairs (including, without limitation, the addition
to the Product of non-MOTOROLA supplied equipment) which
adversely affect performance of the Product or interfere with
MOTOROLA's normal warranty inspection and testing of the
Product to verify any warranty claim.
F) Product which has had the serial number removed or made
illegible.
G)Rechargeable batteries if:
• any of the seals on the battery enclosure of cells are broken or
show evidence of tampering.
• the damage or defect is caused by charging or using the battery
in equipment or service other than the Product for which it is
specified.
H)Freight costs to the repair depot.
I) A Product which, due to illegal or unauthorized alteration of the
software/firmware in the Product, does not function in
accordance with MOTOROLA’s published specifications or the
FCC type acceptance labeling in effect for the Product at the time
the Product was initially distributed from MOTOROLA.
J) Scratches or other cosmetic damage to Product surfaces that
does not affect the operation of the Product.
K) Normal and customary wear and tear.
Commercial Warranty and Service
English
115
VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a United States patent, and
MOTOROLA will pay those costs and damages finally awarded
against the end user purchaser in any such suit which are
attributable to any such claim, but such defense and payments are
conditioned on the following:
A) that MOTOROLA will be notified promptly in writing by such
purchaser of any notice of such claim;
B) that MOTOROLA will have sole control of the defense of such
suit and all negotiations for its settlement or compromise; and
C)should the Product or parts become, or in MOTOROLA’s opinion
be likely to become, the subject of a claim of infringement of a
United States patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure for
such purchaser the right to continue using the Product or parts or
to replace or modify the same so that it becomes non-infringing
or to grant such purchaser a credit for the Product or parts as
depreciated and accept its return. The depreciation will be an
equal amount per year over the lifetime of the Product or parts as
established by MOTOROLA.
MOTOROLA will have no liability with respect to any claim of patent
infringement which is based upon the combination of the Product or
parts furnished hereunder with software, apparatus or devices not
furnished by MOTOROLA, nor will MOTOROLA have any liability
for the use of ancillary equipment or software not furnished by
MOTOROLA which is attached to or used in connection with the
Product. The foregoing states the entire liability of MOTOROLA with
respect to infringement of patents by the Product or any parts
thereof.
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software was
originally embodied and such software in such Product may not be
replaced, copied, distributed, modified in any way, or used to
produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise of
rights in such MOTOROLA software is permitted. No license is
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
VII. GOVERNING LAW:
This Warranty is governed by the laws of the State of Illinois, U.S.A.
Commercial Warranty and Service
English
116
SERVICE
Proper repair and maintenance procedures will assure efficient
operation and long life for this product. A Motorola maintenance
agreement will provide expert service to keep this and all other
communication equipment in perfect operating condition. A
nationwide service organization is provided by Motorola to support
maintenance services. Through its maintenance and installation
program, Motorola makes available the finest service to those
desiring reliable, continuous communications on a contract basis.
For a contract service agreement, please contact your nearest
Motorola service or sales representative, or an authorized Motorola
dealer.
Express Service Plus (ESP) is an optional extended service
coverage plan, which provides for the repair of this product for a
period of three years from the date of shipment from the factory, or
the date of delivery if purchased from an authorized Motorola two-
way radio dealer. For more information about ESP, contact the
Motorola Radio Support Center, 2204 Galvin Drive, Elgin, IL 60123,
1-800-227-6772.
Motorola, Inc.
1301 E. Algonquin Rd.
Schaumburg, IL 60196-1078, U.S.A.
MOTOROLA and the Stylized M Logo are registered
in the U.S. Patent and Trademark Office.
All other product or service names are the property of
their respective owners.
© 2009 by Motorola, Inc.
All rights reserved. Printed in the U.S.A.
September 2009
RO-1-2005
6875947M01-A
*6875947M01*