Motorola Barcode Reader Cpx8000 Users Manual Series CPX8216/8216T CompactPCI System Reference

2015-01-23

• Contents
• List of Figures
• List of Tables
• About this Manual
  • Summary of Changes
  • Systems Supported
  • Overview
  • Comments and Suggestions
  • Conventions Used in This Manual
• System Architecture
  • PICMG Compliance
  • System Domains
  • System Layout
    • CPX8216
    • CPX8216T (H.110)
  • Bus Access and Control
  • The Hot Swap Controller/Bridge (HSC) Module
  • Hot Swap Controller
  • System Processor Configurations
    • The Simplex Configuration
    • The Active/Passive Configuration
    • The Active/Active or Load-Sharing Configuration
  • I/O Configurations
  • Peripherals
    • Power/Fan Modules
    • Drive Modules
  • CPU Complex Architecture
    • The CPU Module
    • Switching Service to the Passive CPU
  • Chassis ID for CPX8216T
  • Alarms and LEDs
  • H.110 Telephony Bus
  • Board Insertion and Extraction Features
    • Staged Pins
    • BD_SEL#
    • ENUM#
    • Hot Swap Control Status Register (CSR)
  • The Hot Swap Process
    • Physical Connection Process
    • Hardware Connection Process
    • Software Connection Process
    • Software Disconnection Process
    • Typical Insertion and Extraction Processes
  • Device Drivers
• CPU Modules
  • Overview
  • CPX750HA
    • Connectors and Jumper Settings
      • Backplane Connectors (P5, P4, P3, P2, P1)
      • Front USB Connectors (J17 and J18)
      • 10BaseT/100BaseTx Connector (J8)
      • COM1 Connector (J15)
      • Debug Connector (J19)
      • DRAM Mezzanine Connector (J10)
      • EIDE Compact FLASH Connector (J9)
      • Flash Bank Selection (J6)
  • CPV5350
    • Connectors
    • Transition Module
    • DRAM Memory Configuration
    • Keyboard/Mouse PS2 Connector
    • Ethernet Connectors
    • Universal Serial Bus (USB) Connector
    • Serial Port Connectors
    • Video Connector
• CPX8540 Carrier Card
  • Overview
  • CPX8540 Carrier Card
  • Connector Pinouts
• PMC Modules
  • Overview
  • SCSI-2 Controller PMC
    • Switch Settings
    • Connector Pin Assignments
• Transition/Bridge Modules
  • Overview
  • CPX750HATM Transition Module
    • Serial Ports 3 and 4 Default Configuration
    • Serial Port Interface Jumper (J8 and J9)
    • Connectors
      • Backplane Connectors (J3/J4/J5)
      • Asynchronous Serial Port Connectors (J10 and J11)
      • Asynchronous/Synchronous Serial Port Connectors (J6 and J24)
      • Parallel I/O Port Connector (J7)
      • Keyboard/Mouse Connector (J16)
      • USB Connectors (J19 and J18)
      • EIDE Connector (J15)
      • Floppy Port Connector (J17)
      • +5Vdc Power Connector (J14)
      • Speaker Output Connector (J13)
      • PMC I/O Connectors
    • Installing the Serial Interface Modules
    • Port Configuration Diagrams
      • COM1 and COM2 Asynchronous Serial Ports
      • Asynchronous/Synchronous Serial Ports
  • CPV5350TM80 Transition Module
    • Connectors
      • Keyboard/Mouse PS2 Connector
      • Ethernet Connectors
      • Serial Port Connectors
      • Video Connector
      • Parallel Port Connector (J20)
      • EIDE Headers (J5)
      • Floppy Header (J9)
      • Keyboard/Mouse/Power LED Header (J6)
      • USB Headers (J12 and J19)
      • SM Bus and LM78 Header (J1)
      • Fan Tachometer Headers (J3 and J4)
      • Indicator LED/Miscellaneous Header (J2)
• Subassembly Reference
  • Chapter Overview
  • Parts of the System
  • CompactPCI Card Cage Reference
  • Backplane Reference
  • Power Supply Connectors (PS1, PS2, PS3)
  • H.110 Power Connector (CPX8216T Only)
  • Alarm Interface Connector (ALARM)
  • Floppy Drive Connectors (FDA, FDB)
  • IDE Drive Connectors (IDEA and IDEB)
  • Peripheral Power Connectors (PWR1, PWR2, PWR3, PWR4)
  • Peripheral Signal Connectors (SIG1, SIG2, SIG3, SIG4)
  • CompactPCI Connectors (P1, P2, P3, P4, P5)— CPX8216 Standard Backplane
    • Primary (Front) Side I/O Connectors (Slots 1-6 and 11-16)
    • Primary (Front) Side CPU Slot Connectors (7 and 9)
    • Secondary (Rear) Side I/O Connectors
  • CPU Transition Module Connectors (Transition Slots 7 and 9)
  • Hot Swap Controller/Bridge Connectors (Transition Slots 8 and 10)
  • H.110 Bus Connectors—CPX8216T System Only
  • Primary (Front) Side I/O Connectors
    • Primary (Front) Side (Slots 1-6 and 11-16)
    • Primary (Front) Side CPU Connectors
    • Primary (Front) Side HSC Connectors
  • Secondary (Rear) Side I/O Connectors
  • Secondary (Rear) Side CPU Transition Module Connectors
  • Alarm Display Panel
  • Alarm Display Panel Interface Connector (J4)
  • Remote Alarm Connector (J1)
  • Power Distribution Panel
    • AC Power Distribution Panel (CPX8216)
    • Dual Input DC Power Distribution Panel (CPX8216)
    • Dual Breaker DC Power Distribution Panel (CPX8216)
    • H.110 DC Power Distribution Panel (CPX8216T)
  • Power Supplies
• Specifications
  • Environmental Characteristics
  • Power Supply Electrical Specifications
• Related Documentation
  • Motorola Computer Group Documents
  • Related Specifications
  • URLs