Multiplex USA PROFIROYAL Model Aircraft Radio Control Transmitter User Manual User Man5

Download:
Mirror Download [FCC.gov]
Document ID	82566
Application ID	rhqpexBAZI7yzLMZGvJp+A==
Document Description	User Man5
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	129.72kB (1621456 bits)
Date Submitted	2000-01-21 00:00:00
Date Available	2000-03-06 00:00:00
Creation Date	2000-01-21 08:52:52
Producing Software	Acrobat 4.0 Import Plug-in for Windows
Document Lastmod	2000-01-21 08:53:18
Document Title	User Man5
Document Creator	Acrobat 4.0 Import Plug-in for Windows

PROF! me 4000 Quick start
At this point you should set the transmitter’s 4.4 Changing the control assignments
mwulation to the receiver which you will be using.
if your receiver is an Fix 12 DS you don't need to Note: the controls will be Inlet-changed!
make any changes. You can move straight on to poim
4,3‘ For example, ll you assign ROLL to transmitter control
A. YAW will automatically be switched to control C.
This prevents the danger of assigning two different
transmitter controls to one funetion.
_ Enter the menu cycle
_ On to ‘Menu 2 assign"
On to the 'Assign controls” menu
Effect
5-—
5——
Open modulation field (flashes)
Select PPM 7, PPM 9, PPM 12 or
POM/A with EVE] or the Dial—adjuster
_ Open the neutral point field (flashes)
EVE Select MPX (-MULTIPLEX) = 1,6 ms
or OTHER = 1.5 me
Back to the operating screen .
Select the function with El/E] or the
4.3 Checking the control mlanmenlc Dlgl-aejusmr
In the Trainer 120 deg" base type the transmitter , And when you are finished:
controls are assigned as follows:
mm _°‘°'“°"‘°°"°”“"°s°'““
Repeat the next two steps until the control
arrangement meets your requirements.
Open the CONTROL field
Select the control with 9/8 or the
Digl-ediustor
Open the OPERATES field
“Hot key" to the “Adjust controls” menu
Select the OOLLECTIVE PITCH
control with BIB or the Dial-adjuster
Open the “Options" field
Lead through with IIEJ or the Dial-
adluetor until "PITCH-MAX" appears
If this arrangement suits your preferred flying mode.
' you can move on directly to point 4.8 “Connecting
servos".
Open select field _
Salad FRONT or REAR Mm 815
Back to the operetlng screen
Quick start "mg
4.6 Connecting servos You have to repeat the following steps lor all serv
Open servo select field
Themesmustbeconmcledesmcllnthe ' ‘
table below. This arrangement cannot be altered! Sdejlegoiervo wrth IB/EI or the Bill 3
e it
For the “Trainer 120 deg” base type you must connect Open INPUT fiei d ‘
the servos in your model a follows: -
mam—w“ W rm—
1——
um—
fsfll’ .
TRIL MIX
SPEED REG Nomlnsrl value for
regulator
Select input with El/El or the Digi-
adjuster
Open adiust field '
Move associated transmitter control
Reverse mixer Input with El
Adlust mixer input with EIIB orthe
Digi-adjuetor
Open Switch iield
Select OFF/ON or a switch
The Dram round the buttons Indlcete that you c i
have to make changes here It it Is necessary.
Once everything is as you want it:
Back to the operating screen ,
Channel for gym
RETRRCT ' Reserve, no
MIXTURE . . slider
———
n m—
—m_
ill“
5 é
Ii
For helicopters all 12 possible servos; are always
assigned. The reason for this is that you cannot alter
the servo assignment tor the helicopter base types.
4. 7 Checking (matching) mixer Inputs
In the “Travel and switches' menu you can do the
following:
- set mixer input values. .- l
- reverse mixer inputs, and ;
- assign switches to the mixer inputs.
This is the procedure:
a U “Hot key“ to “Travel + switches" menu
(erAvlsw')

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2000:01:21 08:53:18-05:00
Create Date                     : 2000:01:21 08:52:52-05:00
Creator                         : Acrobat 4.0 Import Plug-in for Windows
Producer                        : Acrobat 4.0 Import Plug-in for Windows
Page Count                      : 2

EXIF Metadata provided by EXIF.tools