Murata LB1EN Industrial Computer User Manual
Murata Manufacturing Co., Ltd. Industrial Computer Users Manual
Murata >
Contents
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2994320 |
| Application ID | +p0b2M+pJEe2OWvNh3Zhiw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 65.27kB (815923 bits) |
| Date Submitted | 2016-05-18 00:00:00 |
| Date Available | 2016-11-14 00:00:00 |
| Creation Date | 2016-04-15 18:52:28 |
| Producing Software | Microsoft® Word 2013 |
| Document Lastmod | 2016-05-11 17:34:15 |
| Document Title | Users Manual |
| Document Creator | Microsoft® Word 2013 |
| Document Author: | Singh, Dinesh |
Installation and Operation Manual Regulatory Model: N01PC Regulatory Type: N01PC001 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Overview The Dell Embedded Box PC 5000 series allows you to connect (wired or wireless) to network enabled devices and manage them remotely in your existing network ecosystem. The system can be either mounted on the wall using the Dell approved wall mount kit or mounted into your existing rack infrastructure using the Rail mount. The system is running on Windows 10, Ubuntu, and Wind River Linux operating systems. System Features Top - View Feature Expansion-card slot 1 Expansion-card slot 2 Power button Remote power switch Hard reset USB 3.0 port (4) Network port (2) DisplayPort (2) HDMI port 10 CANbus port 11 VGA port 12 +19.5 VDC power port (barrel connector) 13 Audio ports (3) 14 +24V DC power Phoenix connector Supports an optional PCIe discrete graphics solution, 20-25W(12V/2A) graphics card and 10W thermal capability. Supports an optional PCIe discrete graphics solution, 20-25W(12V/2A) graphics card and 10W thermal capability. Press and hold for 2 seconds to turn on the system if it is turned off. Install a remote power switch Press and hold to hard reset the system Connect peripherals such as storage devices, printers, displays and so on. Provides data transfer speeds up to 5 Gbps. Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or internet access. Connect a Monitor or another DisplayPort enabled device. Provides video and audio output. Connect a Monitor or another HDMI‑in enabled device. Provides video and audio output. Connect to a CANbus port enabled device or dongles. Connect a monitor or another VGA enabled device. Provides video output. Connect a +19.5 VDC power connector to provide power to your system Connect a speaker, a headphone, a microphone, or a headphone and microphone combo (headset). Connect a +24V DC power Phoenix connector to provide power to your system Bottom - View Feature GPIO-in 9 pin port GPIO-out 9 pin port USB 2.0 port (4) 10 11 12 13 14 15 Network status light Power status light Hard-drive activity light Network status light Mobile broadband antenna port 2 RS232 port 4 Mobile broadband antenna port 1 RS232 port 3 RS232 port 2 Wireless antenna port 2 RS232 port 1 Wireless antenna port 1 Connect to a GPIO-out enabled device or dongles Connect to a GPIO-in enabled device or dongles Connect peripherals such as storage devices, printers, displays and so on. Provides data transfer speeds up to 480 Mbps. Indicates the connectivity status and network activity of the network port one. Indicates the power‑state of the system. Turns on when the system reads from or writes to the hard drive. Indicates the connectivity status and network activity of the network port two. Connect an antenna to increase the range and strength of the mobile broadband signals. Connect a RS232 cable to configure the system. Connect an antenna to increase the range and strength of the mobile broadband signals. Connect a RS232 cable to configure the system. Connect a RS232 cable to configure the system. Connect a wireless antenna to increase the range and strength of the wireless signals. Connect a RS232 cable to configure the system. Connect a wireless antenna to increase the range and strength of the wireless signals. Setting up your Dell Embedded Box PC 5000 WARNING: When installing the system, the responsible party or integrator shall use the AC Adapter provided with the system, or connect to a 12-26 Vdc power source already present as part of the clients installation If ambient temperature of the installation exceeds 40'C then use the 12-26 Vdc power available as part of the installation. Always make sure that the available power source matches the required input power of the system, check the input power markings next to power connector(s) before making connections. WARNING: Before you begin any of the procedures in this section, read the safety information that shipped with your system. For additional best practices information, go to www.dell.com/regulatory_compliance. WARNING: To ensure the protection provided by the system is not impaired, do not use or install the system in any manner other than that which is specified in this manual. WARNING: Use cable appropriate for the load currents: 3-core cable rated 5 A at 90 °C (194 °F) minimum, which conform to either IEC 60227 or IEC 60245. The system accepts cables from 0.8 to 2.5 mm (18 to 14 AWG). WARNING: Use only the power adapter provided with DELL. The system should be operated only with power source of the same kind as indicated on the Power adapter rating plate. WARNING: The symbol indicates hot surface or adjacent hot surface that can obtain temperature during normal use that can cause a burn. Allow equipment to cool off or use protective gloves when handling to reduce risk of a burn. Professional installation instructions Installation personnel This product is designed for specific applications and needs to be installed by qualified personnel with RF and regulatory related knowledge. The general user shall not attempt to install or change the setting. Installation location The product shall be installed at a location where the radiating antenna is kept 20 cm from nearby persons in its normal operation condition in order to meet regulatory RF exposure requirements. External antenna Use only the antenna(s) which have been approved by the applicant. Non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to a violation of FCC/IC limits and is prohibited. Installation procedure Please refer to user’s manual for the detail. WARNING: Connect power to only one of the two power connection ports, either Phoenix Connector or the Barrel Connector. Connection of two power sources may damage equipment and present risk of fire. Powering on the system WARNING: Connect power to either Phoenix Connector or the Barrel Connector only. Connecting to both power sources may damage equipment and present a fire risk. 1. 2. 3. 4. 5. 6. 7. Install the system on the wall mount using the Dell approved wall mounting kit. or Install the system on the rack infrastructure using the Dell approved DIN-rail mounting brackets. Connect the network cable. or Install the wireless antenna to enable the wireless connections Connect a display to the system. Connect a keyboard and mouse if accessing the system directly. Connect a SELV power source to the system Press the power button to power on the computer. If setting up the system for the first time, complete the operating system setup. Connect and configure to devices using the RS422/RS485 ports. Mounting the system on the wall You can mount the system on a wall by using mounting brackets. The brackets secure the system to the wall. NOTE: Images below are for illustrative purpose only. 1. Secure the two mounting brackets to the rear of the system by using eight screws. 2. Drill four holes in the wall that correspond to the holes in the mounting bracket, then place the system against the wall and align the holes in the mounting brackets with the holes in the wall. 3. Tighten the screws to secure the system to the wall. Specifications Ports and connectors Audio/video microSD card Network One HDMI port One VGA port Two DisplayPort One line-in port One line-out port One microphone port One microSD-card slot Two RJ45 ports Two wireless antenna ports Two mobile broadband antenna ports One CANbus port USB Communications Wi-Fi Bluetooth Four RS232 port Four USB 3.0 port Two USB 2.0 ports Dual-band 802.11b/g/n/ac Bluetooth 4.1 LE Power requirements Phoenix connector input 12-26V voltage/current 10.8A-5A (130W) Power input 12-26V voltage/current 10.8A-5A (130W) WARNING: Connect power to either Phoenix Connector or the Barrel Connector only. Connecting to both power sources may damage equipment and present a fire risk. Environmental requirements Temperature range: Operating 0°C to 50°C (32°F to 122°F) Non-operating -45°C to 65°C (-49°F to 149°F) Relative humidity (maximum): Operating 10% to 90% (non-condensing) Non-operating 5% to 95% (non-condensing) Altitude (maximum, unpressurized): Operating -15.20 m to 5000 m (-50 ft to 16,404 ft) Non-operating -15.20 m to 10,668 m (-50 ft to 35,000 ft)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2016:04:15 18:52:28+08:00 Creator Tool : Microsoft® Word 2013 Modify Date : 2016:05:11 17:34:15+08:00 Metadata Date : 2016:05:11 17:34:15+08:00 Format : application/pdf Creator : Singh, Dinesh Keywords : No Restrictions Producer : Microsoft® Word 2013 Document ID : uuid:97164f28-18d7-412c-b6f4-839aa7580850 Instance ID : uuid:8e08ce03-a6c4-48c0-baf2-a071418adb79 Page Count : 10 Language : en-US Author : Singh, DineshEXIF Metadata provided by EXIF.tools