Mustek Systems MBTA120 Bluetooth User Manual

Download:
Mirror Download [FCC.gov]
Document ID	609767
Application ID	RH2piVDuwudmJz6QAeIufw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	108.68kB (1358517 bits)
Date Submitted	2005-12-08 00:00:00
Date Available	2005-12-08 00:00:00
Creation Date	2005-11-17 13:36:32
Producing Software	Adobe PDF Library 5.0
Document Lastmod	2005-12-05 18:04:24
Document Title	User manual
Document Creator	Adobe InDesign 2.0.2

Quick Guide
82-156-00070
FR DE EN
RU GR PL TU
FI DK SW PT NL ES IT
Stereo Headset and Audio Dongle
EN
Model No.: MBT-A120
Model No.: MBT-S120
FCC ID: HWF-MBTA120
FCC ID: HWF-MBTS120
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Any changes or modifications not expressly approved by the
party responsible for compliance could void the authority to
operate equipment.
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at
the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.
Das Symbol “Mülltonne durchgestrichen” auf dem Produkt bzw. in der Gebrauchsanweisung weist daraufhin, dass Elektround Elektronikgeräte separat vom Hausmüll gesammelt und entsorgt werden müssen. In der EU stehen verschiedene
Sammlungssysteme zur Rücknahme und Wiederverwertung zur Verfügung.
Für weitere Informationen wenden Sie sich bitte an die örtlichen Behörden bzw. an Ihren Händler.
Ce symbole qui apparaît sur le produit ou dans les instructions signifie que votre appareil électrique ou électronique,
lorsqu’il ne fonctionne plus, doit être jeté séparément de vos déchets ménagers. En Europe, il existe différents systèmes
de collecte pour le recyclage.
Pour de plus amples informations, contactez l’autorité locale ou le revendeur auprès duquel vous avez acheté le produit.
Questo simbolo sul prodotto o nelle istruzioni significa che l’apparecchiatura elettrica ed elettronica va smaltita, alla fine del
suo ciclo di durata, separatamente dai rifiuti domestici.
Nell’UE esistono sistemi di raccolta separati per il riciclaggio.
Per maggiori informazioni, rivolgersi all’autorità locale o al dettagliante presso il quale il prodotto è stato acquistato.
Este símbolo que puede aparecer en el producto o en las instrucciones indica que el aparato electrónico o eléctrico no
deberá desecharse al final de su vida con el resto de los desechos domésticos sino por separado.
En la UE existen sistemas de recogida selectiva para el reciclado.
Para más información, póngase en contacto con las autoridades locales o el comercio donde haya adquirido el producto.
Bluetooth Headset & Dongle User Guide
Este símbolo presente no produto ou nas instruções significa que o seu equipamento eléctrico ou electrónico deve ser eliminado no
fim da sua vida útil mas separadamente do lixo doméstico. Existem diferentes sistemas de recolha para reciclagem na EU.
Para mais informações, contacte as entidades locais ou o vendedor junto do qual comprou o seu produto.
Den här symbolen på produkten eller i instruktionerna betyder att den elektriska och elektroniska utrustningen ska slängas separat från
annat hushållsavfall när den inte fungerar längre. Inom EU finns separata återvinningssystem för avfall.
Kontakta lokala myndigheter eller din återförsäljare för mer information.
Dette symbol på produktet eller i vejledningen betyder, at det udtjente elektriske eller elektroniske udstyr ikke må bortskaffes sammen
med husholdningsaffald. I EU-lande findes der separate indsamlingssystemer til genbrug.
Kontakt de lokale myndigheder eller forhandleren for at få yderligere information.
posed at
EU.
Tämä tuotteeseen tai ohjeisiin merkitty symboli tarkoittaa, että sähkölaitteet ja elektroniikka on hävitettävä käyttöikänsä päättyessä
erillään kotitalousjätteestä. EU:ssa on kierrätystä varten erilliset keruujärjestelmät.
Jos haluat lisätietoja, ota yhteys paikallisiin viranomaisiin tai tuotteen myyneeseen liikkeeseen.
Elektroene
Üründeki veya talimatlardaki bu iþaret elektrikli ve elektronik cihazýnýzýn kullaným ömrü sona erdiðinde cihazýn ev çöplerinden ayrý
olarak atýlmasý gerektiði anlamýna gelmektedir. AB’de yeniden iþlemek için ayrý toplama sistemleri bulunmaktadýr.
Ayrýntýlý bilgi için lütfen yerel yetkili veya ürünü satýn aldýðýnýz bayi ile temasa geçiniz.
e,
tèmes
Niniejszy symbol na produkcie lub w instrukcji oznacza, że po zakończeniu eksploatacji urządzenia elektrycznego lub elektronicznego
nie należy wyrzucać go razem z innymi odpadami domowymi. W krajach UE istnieją oddzielne systemy gromadzenia i utylizacji tego
typu odpadów.
Dodatkowe informacje można uzyskać od władz lokalnych lub w punkcie zakupu tego produktu.
roduit.
a fine del
o no
oducto.
Αυτό το σύμβολο στο προϊόν ή στις οδηγίες σημαίνει πως η ηλεκτρική και ηλεκτρονική σας συσκευή θα πρέπει να απορριφθεί στο τέλος
της ζωής της ξεχωριστά από τα οικιακά σας απορρίμματα. Στην ΕΕ υπάρχουν ξεχωριστά συστήματα συλλογής για την ανακύκλωση.
Για περισσότερες πληροφορίες, παρακαλούμε επικοινωνήστε με τις τοπικές αρχές ή με το κατάστημα στο οποίο αγοράσατε το προϊόν.
Данный символ на изделии или в инструкциях означает, что указанное электрическое или электронное
оборудование необходимо утилизировать по окончании срока службы отдельно от бытовых отходов. В ЕС
применяются раздельные системы сбора для переработки.
За дополнительной информацией обращайтесь в местные органы власти или к продавцу, у которого было
приобретено изделие.
Bluetooth Headset & Dongle User Guide
EN
Dit symbool op het product of de handleiding betekent dat u elektrische en elektronische apparatuur aan het einde van de levensduur,
gescheiden van huishoudelijk afval moet weggooien. Er zijn afzonderlijke inzamelsystemen voor recyclage in de EU.
Neem contact op met uw lokale instanties of met de verkoper waar u het product hebt gekocht voor meer informatie.
Model No.: MBT-A120
Model No.: MBT-S120
FCC ID: HWF-MBTA120
FCC ID: HWF-MBTS120
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
82-156-00090
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
RF EXPOSURE WARNING:
The equipment complies with FCC RF exposure
limits set forth for an uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any other
antenna or transmitter.
1
10
LED Indicator
Power Switch
Behind-the-neck Band
DC-In Jack
Microphone
Talk/Pairing Button
Volume Up Button
LED Indicator
Stop Button
Volume Down Button
Dongle
Strap Holder
Audio-In Connector
Power Switch
DC-In Jack
LED Indicator
Pairing Button
10
1 2 3 4
Bluetooth Headset & Dongle User Guide
EN
Identifying the Parts
Headset
Preparation
EN
Charging
Please charge the built-in battery for 5 hours
before initial use.
To Power Outlet
Low battery
When the battery is low, the LED indicator
will flash red. Please charge the battery
for approximately 3 hours.
Pr
bu
sli
Note:
Do not use the headset or dongle while charging,
and do not connect the AC Adapter while the
headset or dongle is in use.
Po
th
Re
fla
th
Th
wh
pa
Power on/off
•
Connect the split ends of the supplied
AC adapter (5V/0.5A) to the DC-IN
jacks of the headset and the dongle.
Connect the other end to a wall outlet.
•
The LED indicator will light RED when
charging.
•
The LED indicator will TURN OFF when
batteries are fully charged.
Bluetooth Headphone & Dongle User Guide
Slide the power switch to power on/off the
headset and dongle. The LED indicator
flashes blue when the power is ON.
Pa
Note:
If the p
repeat
arging,
hile the
off the
ator
EN
dicator
ttery
Pairing
Pairing the Headset and Dongle
Press and hold the TALK/PAIRING
button on the headset and then
slide the power switch to power it on.
Power on the dongle and then press
the PAIRING button to start pairing.
Release the buttons when the LEDs
flash red and blue alternatively. (Now
they are in pairing mode.)
The LEDs flash blue once per second
when the devices are successfully
paired.
Press TALK/PAIRING button
Note:
If the pairing fails, power off both the devices and
repeat steps 1~2 until the pairing succeeds.
Press PAIRING button
Bluetooth Headphone & Dongle User Guide
Using Your Dongle
EN
Listening to the Music
Music Player (Example Only)
Make sure the headset and dongle have
been paired successfully before playing
music.
Connect the dongle’s AUDIO-IN
connector into a music player,
walkman or CD player.
Power on the dongle, headset and
music player.
Play the music player and the music
will be heard on the headset.
To stop the music, press the
PAIRING button on the dongle.
To play the music again, press the
PAIRING button on the dongle.
Bluetooth Headphone & Dongle User Guide
Audio Dongle
Audio-In Connector
Pa
Ph
Pr
bu
po
Re
fla
Th
bl
st
de
Se
ph
fo
Th
en
Th
on
th
su
1
Notes:
1) Your headset can save the pairing information
of up to 8 phones, but connect to only one phone
at a time.
2) The mobile phone may provide the function
of changing the headset’s name. “MBT-S120“
can be replaced by the name that you prefer.
Press TALK/PAIRING button
Select MBT-S120 in the display
Bluetooth Headphone & Dongle User Guide
EN
Pairing
Pairing the Headset and a Mobile
Phone
Press and hold the TALK/PAIRING
button on the headset and then
power on the headset.
Release the button when the LED
flashes red and blue alternatively.
The headset is now in pairing
mode and is ready to pair with your
bluetooth mobile phone.
Use your bluetooth mobile phone to
start searching for bluetooth audio
devices.
Select “MBT-S120” in the mobile
phone display when the headset is
found.
The phone will ask for a pin code,
enter: 0000.
The LED indicator flashes blue
once every 2 seconds when both
the headset and mobile phone are
successfully paired.
Using Your Headset
EN
Using the Headset
Make a Call
Use the phone’s keypad to dial the phone
number that you want to call.
Answer a Call
When receiving a call, you will hear a
ring tone through the headset. Press the
TALK/PAIRING button to answer the call.
End a Call
Press the STOP button on the headset or
the end-call button on the mobile phone to
end a call.
Press TALK/PAIRING
button to answer a call
Press STOP button to
end a call
Bluetooth Headphone & Dongle User Guide
Redial the Last Call
Press and hold the STOP button on the
headset for approximately 2 seconds to
redial the last number.
Make a Voice Dial
Press and hold the TALK/PAIRING button
until you hear a tone, then speak a voice
tag to make a voice dial.
Note:
Make sure your mobile phone supports voice dialing function and you have already recorded the
voice tag befor operating.
Receiving or Making a Call While
Listening to the Music
The headset enables an auto-switching
function. Once you receive or make a call
during music playback, you can hear the
ring or dial tone from the headset. When the
call ends, the music will resume.
Pairin
Conne
Conne
Conne
Idle (p
Batter
Charg
Batter
button
oice
ce dialthe
Status
Headset Left Ear LED
EN
on the
nds to
LED Indicators
Dongle
Pairing
Flashes blue and red alternatively until the pairing is complete or
time out (within 60 seconds)
Connecting
Flashes blue twice per second
Connected (to mobile phone)
Flashes blue once every 2 seconds (headset only)
Connected
Flashes blue once per second
Idle (pairing fails)
Flashes blue once every 3 seconds
Battery low
Flashes red
Status
Headset Right Ear LED
Charging
Light red
Battery Full
Light out
Dongle
ile
tching
a call
ar the
en the
Bluetooth Headphone & Dongle User Guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:12:05 18:04:24+08:00
Create Date                     : 2005:11:17 13:36:32Z
Producer                        : Adobe PDF Library 5.0
Creator                         : Adobe InDesign 2.0.2
Trapped                         : False
Page Count                      : 12
Creation Date                   : 2005:11:17 13:36:32Z
Mod Date                        : 2005:12:05 18:04:24+08:00
Metadata Date                   : 2005:12:05 18:04:24+08:00
Document ID                     : adobe:docid:indd:0be0a462-572c-11da-98eb-df7477eda42d
Version ID                      : 1
Rendition Class                 : proof:pdf
Rendition Of Document ID        : adobe:docid:indd:0be0a462-572c-11da-98eb-df7477eda42d
Rendition Of Version ID         : 1
Rendition Of Rendition Class    : default
Format                          : application/pdf
Title                           : 

EXIF Metadata provided by EXIF.tools