NABCO Entrances ACUMOTION ND-600 Sensor User Manual SR 02602

NABCO Entrances, Inc. ND-600 Sensor SR 02602

Contents

Adjustment manual

Download: NABCO Entrances ACUMOTION ND-600 Sensor User Manual SR 02602
Mirror Download [FCC.gov]NABCO Entrances ACUMOTION ND-600 Sensor User Manual SR 02602
Document ID274313
Application IDQu1ZAApJJFGbnYwhO23YGg==
Document DescriptionAdjustment manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.68kB (108478 bits)
Date Submitted2002-10-02 00:00:00
Date Available2002-10-02 00:00:00
Creation Date2002-10-01 12:14:34
Producing SoftwareAcrobat PDFWriter 4.05 for Windows
Document Lastmod0000-00-00 00:00:00
Document TitleSR-02602.PDF
Document CreatorMicrosoft Word
Document Author: cvu

SR-02602
Adjustment Manual for Acumotion Prototype
1. Parts list
1)Acumotion:
pc
2)3 conductor
Cable: pc (5ft)
3)Antenna: pc
There are two type of the Antenna, such as Wide field which has 3 chips and
Narrow Field which has 6 chips.
2. Function of LED
Sensor
Power ON &
Status
No Detection
LED
Green
Status
Microwave
detects
Infrared
detects
Microwave &
Infrared detect
Orange
Red
Off
3. Adjustment
1) Lever for mounting angle of entire sensor
This white lever is to adjust the angle of the entire sensor and will be used to
adjust the field of the around threshold for Infrared. When you move this
white lever to upside, sensing field will be move to close side of the door.
9 positions adjustment is available. (-4 ~ 4 deg.)
2) Angle adjustment
adjustment for Microwave sensor
This part is to adjust the angle of microwave head.
11 positions adjustment is available. (15 ~ 45 deg.)
SR-02602
3) Depth adjustment lever of Infrared sensor
This slidable lever is to adjust the depth of infrared field.
Lever position [1] : Depth of infrared field
1 ft
Lever position [2] : Depth of infrared field
2 ft
Lever position [3] : Depth of infrared field
3 ft
When you need the enough depth of microwave field, please adjust this
lever ,there is no detection zone between Infrared beams and microwave
beams.
4) Dip Switch 1 (8 positons)
This switches are for Infrared sensor.
Switch
Function
Number
1, 2
Mutual
Interference
Prevention Mode
3, 4
Sensitivity&
Presence time
adjustment
Adustment
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
ON
OFF
ON
OFF OFF
5, 6, 7, 8
Adjustment of
width
ON
OFF
ON
ON
ON
OFF
OFF OFF
OFF
ON
Mode A
Mode B
Mode C
Mode D
High Sensitivity 15 sec
High Sensitivity
sec
Low Sensitivity 30 sec
Snow Mode
15 sec
No Cancellation
One spot of left outside
is cancelled.
Two spots of left outside
are cancelled.
Three spots of left
outside are cancelled.
No Cancellation
One spot of Right
outside is cancelled.
Two spots of Right
outside are cancelled.
Three spots of Right
outside are cancelled.
SR-02602
5) Dip Switch 2 (4 positions)
This switches for the microwave sensor.
Switch
Function
Number
Bi/Unidirectional
2, 3
Sensitivity of
Frequency Noise
Infrared ON/OFF
Adjustment
ON
OFF
Uni-directional
Bi-directional
ON ON
Standard
ON OFF
High
OFF ON Noise prevention Mode 1
OFF OFF Noise prevention Mode 2
ON
Effective
OFF
Invalid
6) Sensitivity of power for Microwave sensor (Potentiometer)
10 positions adjustment of sensitivity is available by a potentiometer.
CW: High Sensitivity, CCW: Low Sensitivity High
4. Wiring
Red: 12VDC Input
Black: 12VDC Ground & Output Common
White: Out put (DC30V/0.1A max)
Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions;
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RF Exposure (OET Bulletin 65)
To comply with FCC RF exposure requirements for mobile transmitting device, this
transmitter should only be used or installed at locations where there is at least 20
cm(7.78 inches) separation distance between the antenna and all person.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 3
Creator                         : Microsoft Word
Create Date                     : 2002:10:01 12:14:34
Title                           : SR-02602.PDF
Author                          : cvu
Producer                        : Acrobat PDFWriter 4.05 for Windows
EXIF Metadata provided by EXIF.tools
FCC ID Filing: O82-ACUMOTION

Navigation menu