NBS Payment Solutions Division of NBS Technologies NBS7250 PIN Pad with RFID reader User Manual NBS7250

Download:
Mirror Download [FCC.gov]
Document ID	1012637
Application ID	Ea55Dm2VwFHfxHXeY3lMtQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.83kB (460413 bits)
Date Submitted	2008-10-08 00:00:00
Date Available	2008-10-08 00:00:00
Creation Date	2008-09-16 10:42:24
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2008-09-16 10:42:24
Document Title	Microsoft Word - NBS7250 User Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	djovanovic

NBS7250 User Manual
Rev 1.0
Contents
MANUFACTURER’S DECLARATION OF CONFORMITY .............................................. 4
EQUIPMENT .................................................................................................................... 5
NBS7250 installation manual ........................................................................................... 6
Path of the cables ...................................................................................................... 7
Removing the cable: .................................................................................................. 7
Installing the cable: .................................................................................................... 7
Ethernet Cable (Option) ............................................................................................. 7
Preparing the back cable cover.................................................................................. 7
NBS Payment Solutions
2/8
User Manual
Telium ,
®
technological excellence,
high security performance.
NBS Payment Solutions
3/8
User Manual
MANUFACTURER’S DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.”
§§§
This equipment has been tested and found to comply with the limits for a Class B digital devices, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications to the terminal and base, not expressly approved by NBS Payment Solutions, could
void your authority to operate this equipment under FCC regulations
NBS Payment Solutions
4/8
User Manual
EQUIPMENT
NBS7250 is the PIN Pad for electronic payment in the 21st century.
It answers user comfort requirements, as well as the continually growing demands of payment
card providers, whether in terms of performance, security or upgradeability.
®
NBS7250 is based on SAGEM Monetel's Telium technology.
The NBS7250 terminal is:
•
•
•
•
•
•
ultra-powerful,
highly secure,
multi-application,
very reliable,
upgradeable,
easy to operate.
NBS7250 is ready for migration to EMV smart cards while still providing the secure
processing of magnetic stripe cards.
NBS7250 is today's terminal for future electronic payment.
NBS Payment Solutions
5/8
User Manual
NBS7250 installation manual
Safety instructions lithium battery :
NBS7250 equipment is equipped with a lithium battery which is non-accessible for the user. Only a qualified operator is
authorized to open the unit and to replace this component.
Keypad
Installing the Shield (option)
Inserting, sliding or presenting
the cards
UP Arrow key
Down Arrow key
Function Key
Cancel Key
Delete Key
Enter Key
Physical characteristics :
Weight (without cable)
Dimensions
Removable cable
240g
165 x 95 max x 45mm (LxWxH)
Operating conditions :
Temperature
Maximum relative humidity
+5°C to +45°C
85% RH to +55°C
Storage conditions :
Temperature
Maximum relative humidity
-20°C to +55°C
85% RH à +55°C
Consumption :
180mA @ +12V
280 mA @ +8V
350 mA @ +5V
Fixing of the base :
Maintain the product on its base :
The base can be fixed by
three screws.
Two choices are possible, the
holes (A) or (b) indicated on
the drawing opposite.
The base can be used as
gauges of pointing on the
holes of the screws and for
the openings of connectors.
NBS7250 is maintained by a notch situated on its front side
and two clips on the back side. In order to install it on its
base, first introduce the front side of the equipment and
then, make a press on its back side until hearing the locking
noise . In order to remove it from the base, remove the two
clips one after the other while pulling up the equipment
NBS Payment Solutions
6/8
User Manual
Path of the cables
Plug and unplug the strain relief :
It could be more easier to put in place the strain relief by
unplugging the connector
proceed according to the figures below
Removing the cable:
N°1
N°2
To take of the cable, press
the flap N°1 and pull the
cable N°2.
Installing the cable:
Note : Take care to have sufficient available length of cable
in order to be able to remove the terminal from its base and
so, to be able to unplug the connector
The serial cable can go under the base to reach the opening.
Maybe by the way mentioned as 3, or right in front of the
connectors mentioned as 1 and 2.
Make a 18 mm diameter hole in the base in order to have a
path for a squared angle connector (14mm diameter in case
of base thickness lower than 14 mm.
Ethernet Cable (Option)
Preparing the back cable cover
The Ethernet cable is optional.
The path is through the hole(2).
The opening in the table must be
14mm diameter.
NBS Payment Solutions
7/8
The back cover may be opened
as mentioned as 4 in order to
have a path for Ethernet cable.
(option)
User Manual
The descriptions, illustrations and characteristics in this document are only given for information and not contractually binding. NBS Payment Solutions –
the Division of NBS Technologies Inc. reserves the right to make any alterations without prior notice. All rights of reproduction, adaptation, execution, and
translation reserved in all countries.
The NBS Payment Solutions trademarks and logos are the property of NBS Payment Solutions – the division of NBS Technologies Inc.
NBS Payment Solutions – the Division of NBS Technologies Inc.
703 Evans Avenue, Suite 400
Toronto, Ontario, M9C 5E9 Canada
NBS Payment Solutions
Telephone: +1 416 621 7410, Fax: +1 416 621 2450
8/8
User Manual

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2008:09:16 10:42:24-04:00
Modify Date                     : 2008:09:16 10:42:24-04:00
Page Count                      : 8
Creation Date                   : 2008:09:16 14:42:24Z
Mod Date                        : 2008:09:16 14:42:24Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : djovanovic
Metadata Date                   : 2008:09:16 14:42:24Z
Creator                         : djovanovic
Title                           : Microsoft Word - NBS7250 User Manual.doc

EXIF Metadata provided by EXIF.tools