NEAT Electronics 1400304 Radio Pendant User Manual SMILE 100x106
NEAT Electronics AB Radio Pendant SMILE 100x106
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2927635 |
| Application ID | T44BdqkhxBQoRPdEVDs1Ig== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 70.43kB (880410 bits) |
| Date Submitted | 2016-03-12 00:00:00 |
| Date Available | 2016-03-13 00:00:00 |
| Creation Date | 2015-12-14 15:22:46 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2015-12-14 15:22:50 |
| Document Title | SMILE User Manual 100x106 |
| Document Creator | Adobe InDesign CS6 (Windows) |
| Document Author: | Kim Berntson |
Dr aft SMILE Portable transmitter User manual NE41 14002-02 v1.0 Draft, not for public use Output date: 2015-12-14 NEAT Electronics AB is not responsible for any loss of data, income or any consequential damage whatsoever caused. For more information, details and descriptions, visit our web site: www. neat-group.com/se/en EU Notes NEAT Electronics declares that this mobile device, type SMILE, is in compliance with the essential requirements and other relevant provisions: Directive: 1999/5/CE (RTTE), 2004/108/EC (EMC), 2006/95/EC (LVD) Standards: EMC: EN 301 489-1 V1.8.1 (2008) EN 301 489-3 V1.4.1 (2002) Radio: EN 300 220-2 V2.3.1 Category III Low Voltage: EN 60950-1:2006+A11:2010 US Notes FCC ID: 2AGLF1400304 Dr aft Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: © NEAT Electronics AB 2015 All rights reserved. Document number: NE41 14002-02 v1.0 Revision date: 2015-12-14 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. NEAT Electronics AB Varuvägen 2 SE-24642 Löddeköpinge Sweden Phone: +46 (0)46 707065 Fax: +46 (0)46 707087 www.neat-group.com/se/en infosweden@neat-group.com Intended use Contents Intended use General functions SMILE Parts Handling and operation Mounting Mounting/unmounting the PIN/necklace Mounting the wristband Mounting the CLIP Mounting the HAPA SMILE is intended for use in homes and wardens to provide a feeling of security with the possibility to dispatch alarms in the event of an accident. General functions SMILE is a portable trigger which must be connected to a receiver (e.g. NEO 5 Homecare Phone, TREX2G Portable 5 Transceiver, D-TECT and D-SERVER System) to be able to send alarms. 6 The alarm is trigged by a light touch on the red alarm button and the alarm is acknowledged by blinking green. Dr aft NEAT Electronics AB reserves the right to change or improve their products and to make changes to the content without obligation to notify any person or organization of such changes or improvements. Important Safety Notes Use Cleaning Disposal Technical Data Ulrik Lundberg Managing director SMILE User manual NE41 14002-02 v1.0 SMILE User manual NE41 14002-02 v1.0 Draft, not for public use Output date: 2015-12-14 Draft, not for public use Output date: 2015-12-14 Information in this User manual is subject to change without notice. Handling and operation Mounting ② ③ ④ Dr aft # Denomination ① SMILE Unit (with red alarm button) ② SMILE PIN (with latch and necklace) ③ SMILE CLIP (Optional) ④ SMILE Handicap Adaptor (Optional) SMILE Wristband (not displayed) SMILE Berlock Mounting/unmounting the PIN/ necklace ② ① Thread the pin into the holes and press until the latch clicks into place. Release the pin by pressing the latch ① and then pulling it upwards ②. Mounting the wristband Thread the wristband through the holes and attach on arm. Fix CLIP on the back of the SMILE, thread the PIN trough the holes on the SMILE until the latch clicks in place. To detach the CLIP, press the PIN latch and remove the PIN. Dr aft ① The SMILE Unit, Wristband and Pin are included in a standard SMILE Kit while the CLIP and HAPA are optional accessories. Mounting the CLIP Press the red alarm button to transmit an alarm. Draft, not for public use Output date: 2015-12-14 Draft, not for public use Output date: 2015-12-14 SMILE Parts Mounting the HAPA This section intentionally left blank Gently press the HAPA to the front of the SMILE. To detach, use a thin blade (e.g. a table knife or similar) insert under the HAPA and gently bend the hooks from SMILE. Do not use excessive force or the hooks may break. SMILE User manual NE41 14002-02 v1.0 SMILE User manual NE41 14002-02 v1.0 Draft, not for public use Output date: 2015-12-14 Safety Notes • All parts in the product kit can be cleaned with a mild soap solution and a damp cloth. Dry with a dry cloth. • Strong chemicals, grease and other harsh substances must not be used when cleaning or handling the parts in the product kit. • After cleaning, control that the product works properly by sending a test alarm to the alarm receiver/central. Disposal At the end of the product’s use life, please dispose of it at appropriate collection points provided in your country. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA, www.eiae.org). In the European Union, the bin label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling or returned to NEAT Electronics. Dr aft • Read instructions prior to use • Always test the system per instructions prior to use and always check the function of the product after making adjustmentsThis product may not be suitable for all persons. • This product should not be a substitute for the routine visual monitoring protocol by caregiver and must not be used in situations where a delay in the arrival of appropriate medical care, could lead to a potentially life-threatening situation. • Our units are NOT intended for any life support device, thus intending a device whose malfunction may result in damage to a life. • Check the device regularly and replace when necessary. • Do not integrate to other systems other than those specified in this document. • The product will not cause electromagnetic disturbances under normal working conditions. • The product can be placed near other products or devices as long as mechanical vibration is not present. Cleaning Use • • • • • • Use only original parts. Keep away from dust, moist and dirt. Do not drop, knock, twist or shake the device. Do not warm up the device or use it near fire. The product may not be painted. For repairs, contact a NEAT dealer. SMILE User manual NE41 14002-02 v1.0 Technical Data Measure Weight (incl. battery) RF Frequency Battery life IP Class Temperature range Approvals 34 x 42 x 15 mm 14 g EU US 869.2 MHz 916.2 MHz (Social alarms) TBD TBD +5 - +55 °C TBD Dr aft Important Draft, not for public use Output date: 2015-12-14 Dr aft www.neat-group.com/se/en Draft, not for public use Output date: 2015-12-14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Format : application/pdf Title : SMILE User Manual 100x106 Creator : Kim Berntson Description : NE41 14002-99 Subject : SMILE, User manual, 100x106 Create Date : 2015:12:14 15:22:46+01:00 Metadata Date : 2015:12:14 15:22:50+01:00 Modify Date : 2015:12:14 15:22:50+01:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:2be2f5c4-1db5-45cd-a78b-36e47274a662 Original Document ID : xmp.did:B4786302BD11E011B896F2037D90A15C Document ID : xmp.id:18BBE7186EA2E51187CBAD672606C50F Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:17BBE7186EA2E51187CBAD672606C50F Derived From Document ID : xmp.did:896B725FDBD5E3118D1E8D21E69A052C Derived From Original Document ID: xmp.did:B4786302BD11E011B896F2037D90A15C Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2015:12:14 15:22:46+01:00 Date Created : 2011:01:20 Warning : [minor] Fixed incorrect URI for xmlns:swf Background Alpha : 0 Producer : Adobe PDF Library 10.0.1 Trapped : False Creator Work Telephone : +46 46 59 00 155 Creator Work Email : kb2neatelectronics.se Creator Work URL : www.neatelectronics.se Page Layout : OneColumn Page Count : 5 Author : Kim BerntsonEXIF Metadata provided by EXIF.tools