NEC of America LOBHA Bluetooth Hub User Manual BHE L UNIT CCS

NEC Corporation of America Bluetooth Hub BHE L UNIT CCS

Users Manual

 <Unpairing>To unpair a paired the Bluetooth® device, select the device in the [Delete] screen.ĄOther Setting and Check<Visibility Setting>Set whether to make information about the BHA-L UNIT visible to other Bluetooth® devices (default: [2. Enable]).<BT Information>You can view the following kinds of information about the BHA-L UNIT:¥Firmware and hardware versions¥Bluetooth® module information andstandard¥Installed profile versions ¥Device address and nameĄSpecifications※Bluetooth® is a registered trademark owned by Bluetooth SIG, Inc. and is licensed to NEC InfrontiaCorporation.ĄIntroductionThe BHA-L UNIT is an adapter that connects a Bluetooth® device to a multifunctional telephone.The table below lists the type of device that can be connected to the BHA-L UNIT and the functions sup-ported by it.ĄImportantûThis product features built-in radio equipment that operates on the entire band of2.4 to 2.4835 GHz. Bands in which mobile stations are identified can be avoided.The product supports the FH-SS modulation method and an interfering distance of80m. It is labeled with a mark to designate these characteristics as shown at right.ûThe working frequency band of this device is shared by industrial, scientific and medical equipment,such as microwave ovens, premises radio stations that are typically used in manufacturing lines atplants for mobile identification (radio stations that require licensing) and specified low-power radio sta-tions (license-free radio stations).Item SpecificationDestinationMultifunctional telephone bottom-unit connector (except for economy multifunctional telephone)Bluetooth® version Bluetooth® version 2.0Radio interface Bluetooth® Class1Installed profiles eGAP : Generic Access Profile eHSP : Headset ProfileeSPP : Serial Port Profile eHFP : Hands Free ProfilePower consumption About 0.8 W (excluding the telephone)Power feeding method Power feeding from the multifunctional telephoneDimensions (L×W× H)82mm×65mm ×25mmWeight 150gOperating environment Temperature: 0 to 40℃, Relative humidity: 10 to 90% (no dew condensing)Restrictions Keep the BHA-L UNIT at least 1m apart from other BHA-L units and at least 3m apartfrom other radio equipment.=2CKTKPI?ĉĊ$CEM1-Ĵ Ĵĵ=$NWGVQQVJ*GCFUGV?&GNGVG%QPPGEVĉĊ$CEM1-=&GNGVG?&GNGVG$6&GXKEG1-!$CEM1-Ĵ Ĵ=$NWGVQQVJ?2CKTKPI/QFG8KUKDKNKV[ĉĊ$CEM1-Ĵĵ=8KUKDKNKV[?&KUCDNG'PCDNGĉĊ$CEM1-ĴĵĴĵ=$NWGVQQVJ?$6+PHQTOCVKQPĉĊ$CEM1-Ķ=$6+PHQTOCVKQP?(KTOYCTG8GTUKQP::ZZ*CTFYCTG8GTUKQP::ZZĉĊ'ZKVĶType of deviceAvailable function RemarksBluetooth®headset¥¥Originating calls to an extension or central office linePress the headset call (call control) key twice briefly and per-form a dialing operation from the telephone.¥Answering terminating callsPress the headset call (call control) key while a call termi-nates with a ring tone. ※The headset call control key allows you to only originate calls from the headset and answer terminating calls.Any other headset-specific functions are not supported.※The handset cannot be used while you are talking with the Bluetooth® headset on. You cannot switch to the Bluetooth®headset to use while you are using the handset, either.¥The ringing of calls terminat-ing to the headset is linked with that of the telephone, though some ringing fea-tures, such as a busy tone, are not supported.※For latest information about recommended products, browse the following Web site:http://www.necinfron-tia.co.jp/¥A headset with built-in Bluetooth® supporting the HFP/HSP profiles can be connected to the BHA-L UNIT. ¥The receiver volume can be controlled with the multifunctional telephone (the cursor up and downkeys or the volume key).¥Whether the functions mentioned above work or not depends on the destination system. For moredetails, refer to the use’s guide that comes with the destination system.¥The ways you originate calls from the Bluetooth® headset and answer terminating calls may varydepending on the type of device you use.A50-012515-001Issue 1.02007.12BHA-L UNIT Connection ManualBHA-L UNITBluetooth -readyheadsetRCaution2.4 FH 8
2 3▼Mounting ProcedureFollow the steps below to attach the BHA-L UNIT to the bottom-unit connector on the back of the multi-functional telephone. If the telephone is furnished with various cables, remove these cables first.1Turn over the telephone.2Lower the tilt legs to the first level.3Release lugs a and b on the stopper from grooves A and B in the tilt legs and widen the tilt legs.4Remove the connector cover (rubber) from the bottom unit connector.5Attach the BHA-L UNIT to the tele-phone connector while pushing the claws on both sides of the unit.6Replace the tilt legs in original position.The installation of the BHA-L UNIT is complete.▼Pairing a Bluetooth® Device with a Multifunctional Telephone with Each OtherInvoke the Bluetooth® screen from a multifunctional telephone menu and register the Bluetooth® head-set with the BHA-L UNIT.For more details on working with the menu, refer to the user's guide or other documentation that comeswith your system.< Invoking the Bluetooth® Device Setup Screen >Invoke the Bluetooth® screen in one of the following methods:◆Digital multifunctional telephone・If the BHA-L UNIT is connected to an Aspire X: Press menu keys > [5. Optional Devices] > [1. Bluetooth].・If the BHA-L UNIT is connected to a PBX (other than Aspire X): Press menu keys > [3. Setup] > [5. Optional Devices] > [1. Bluetooth].◆IP multifunctional telephone・If the BHA-L UNIT is connected to an Aspire X: Press menu keys > [1. Terminal Setup] > [7. Optional Devices] > [1. Bluetooth].・If the BLH-L UNIT is connected to a PBX (other than Aspire X): Press menu keys > [1. Terminal Setup] > [1. User Setup] > [4. Optional Devices] > [1. Bluetooth].<Entering a PIN Code>In pairing a Bluetooth® device having a PIN Code other than 0000, enter a string of 4 to 16 digits to suitthat device.<Pairing>Up to 8 Bluetooth® devices located around the BHA-L UNIT are located, among which select a devicewant to pair with the device.<Connecting to the Paired Device>Enable the Bluetooth® device. Select [2. Enable] in the connection screen.・Only one BHA-L UNIT can be mounted per telephone.・The BHA-L UNIT cannot be mounted on the economy multifunctional telephone (DTL-2E-1) and thecordless terminal (DTL-24BT-1).Removing the BHA-L UNITLift off the BHA-L UNIT while pushing the claws on both sides of the unit.CautionaABbTilt legStopperMultifunctional telephoneConnector coverMultifunctional telephoneBHA-L UNITClawClawTipsAfter pairing a Bluetooth® device, be sure to configure its connection to enable it. If connected setting isnot done,the Bluetooth® device that does the pairing cannot be used.=$NWGVQQVJ?2CKTKPI/QFG8KUKDKNKV[ĉĊ$CEM1-Ĵĵ ĵĴ=2CKTKPI/QFG?2CKTKPI2+0%QFGĉĊ$CEM1-Ĵ=2+0%QFG?2+0%QFG!$-$CEM1-=2CKTKPI?$NWGVQQVJ*GCFUGVĉĊ$CEM1-Ĵ=2CKTKPI?ĉĊ$CEM1-ĴĴĵ=$NWGVQQVJ*GCFUGV?CCDDEEFFGGHHĉĊ$CEM1-=$NWGVQQVJ?2CKTKPI/QFG8KUKDKNKV[ĉĊ$CEM1-ĴĵĴĵ=2CKTKPI/QFG?2CKTKPI2+0%QFGĉĊ$CEM1-Ĵ ĴĴ Ĵ Ĵ=2CKTKPI?ĉĊ$CEM1-ĴĴĵ=$NWGVQQVJ*GCFUGV?&GNGVG%QPPGEVĉĊ$CEM1-Ĵĵ=%QPPGEV?&KUCDNG'PCDNGĉĊ$CEM1-Ĵĵ ĵCaution
ivFCC portionThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:・Reorient or relocate the receiving antenna.・Increase the separation between the equipment and receiver.・Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.・Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) This device mustaccept any interference received, including interference that may cause undesired operation.Caution:Any changes or modifications not expressly approved by the party responsible for productcompliance could void the user’s authority to operate the equipment.To comply with FCC RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter.Regulatory Statement FCC portion To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
vIndustry Canada PortionCanada Regulatory Compliance StatementThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada.For Customers in CanadaThis device complies with RSS 210 of Industry Canada (IC).Operation is subject to the following two conditions:・this device may not cause interference, and・this device must accept any interference, including interference that may cause undes-ired operation of this device.L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes:・il ne doit pas produire de brouillage et・I'utilisateur du dispositif doit étre prêt a accepter tout brouillage radioélectrique reçu,même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.Exposure to radio frequency radiationThe installer of this radio equipment must ensure that the antenna is located or pointed suchthat it does not emit RF field in excess of Health Canada limits for the general population;consult Safety Code 6, obtainable from Health Canada’s website at www.hc-sc.gc.ca/rpb.

Navigation menu