NEOCONTROL US NMI01WT SLIMTOUCH User Manual
NEOCONTROL US LLC SLIMTOUCH
User Manual
COMMAND ACTIVATION (SCENES) SLIMTOUCH NEO-SLT-BL NEO-SLT-WH NEO-SLT-DW NEO-SLT-LW NMI01WT BATTERY EXCHANGE doc. version - vI01 www.neocontrolglobal.com contact@neocontrolglobal.com Slim Touch is powered by 2 CR2032 batteries. To insert the battery follow the following procedures: • Remove the cover. • Insert the battery into the bottom slots with the negative poles • facing up. • Place the cover. Neocontrol US LLC © 2017 All rights reserved. ENGLISH ENGLISH Please, follow the device’s operating instructions as indicated in this manual. Sensitive to humidity! The device must not be exposed to liquids or excess moisture. ESPAÑOL Fragile. Handle your device carefully, avoiding impacts. Recyclable product. Do not dispose into the environment. This is a free guide and part of the product; therefore it cannot be sold separately, copied or duplicated without written permission from Neocontrol US LLC. Siga correctamente las instrucciones del manual. Sensible a la humedad! El aparato no debe entrar en contacto con agua o ambientes excesivamente húmedos. Producto frágil. Cuide de su dispositivo, evitando impactos. OVERVIEW SLIMTOUCH is an electronic interface that allows the user to control devices and activate scenes through Neocontrol’s home automation system. It does not require infrastructure and it can be used as a mobile interface. It has 6 touch-screen pads that activate up to 6 scenes. Producto Reciclable. No descartar en residuos generales. Este manual es gratuito y parte del producto, por lo que no se puede vender por separado, ni copiar sin el permiso por escrito de Neocontrol US LLC. SAFETY AND RESPONSIBILITY Please read this guide carefully before using the product. This product must be installed by a qualified home automation installer. The installer must comply with current standards and legislation in the country in which the product is being installed, and inform his customers of the operating and maintenance conditions of the product. Failure to comply with the instructions herein constitues a violation to the warranty and will discharge Neocontrol of any and all liabilities. FEATURES • • • • RTN Radio Trigger up to 6 scenes Customizable Icons Does not require infrastructure TECHNICAL INFORMATION • • • • • • • • • • Power Supply: 2 batteries 3V (CR2032) RTN: Radio frequency 434MHz (TX) Low battery consumption Signal Range RF: 80ft/25m Storing Temperature Range: 0°C to +50°C (32°F to +122°F) Operating temperature: -10°C to +70°C. (14°F to +158°F) Humidity: +5% a 95% non-condensed. Maximum RF signal power: 10mW Dimension: 88mmx127mmx15mm Weight: 132g PRESENTACIÓN La interfaz táctil SLIMTOUCH es un dispositivo electrónico, que tiene como objetivo comandar la automatización del hogar para Sistemas de automatización de Neocontrol. No requiere infraestructura y se puede utilizar como interfaz móvil. Cuenta con pantalla táctil de 6 teclas que activan hasta 6 comandos de automatización. SEGURIDAD Y RESPONSABILIDAD Lea este manual antes de instalar y utilizar el producto. Este producto de Neocontrol debe ser instalado por un profesional certificado de automatización residencial. Además, la persona instalando debe cumplir con las normas y legislaciones en vigor del país en el que el producto está siendo instalado, e informar a sus clientes de la operación y mantenimiento del producto. Cualquier violación a las instrucciones contenidas en este manual constituye una violación a la garantía y absuelve a Neocontrol de cualquier responsabilidad. CARACTERISTICAS • Radio RTN • Activa hasta 6 escenas de automatización • Iconos personalizables • No requiere infraestructura INFORMACIONES TÉCNICAS • • • • • • • • • • Fuente de alimentación: 2 batería de 3V (CR2032) Frecuencia RTN: 434MHz (TX) Bajo consumo de batería Rango de Señal RF: 25m Temperatura de almazenaje: 0°C a +50°C Temperatura de funcionamiento: -10°C a + 70°C Humedad: 95% + 5% no condensada Máxima potencia de la señal de RF: 10 mW Dimensiones: 88mmx127mmx15mm Peso: 132g GATILLO DE COMANDOS (ESCENAS) CAMBIO DE BATERÍAS Slim touch es funciona con 2 pilas CR2032. Para insertar la batería siga los siguientes pasos: • Primero, retire la tapa. • Inserte la batería en la esquina inferior derecha en su lugar respectivo. • A continuación, coloque la tapa. For more information visit: www.neocontrolglo bal . co m Home automation Automatización residencial Automação residencial Neocontrol US LLC Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Has XFA : No Language : en-US XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Create Date : 2017:06:02 12:38:17-04:00 Metadata Date : 2018:05:09 17:48:01+08:00 Modify Date : 2018:05:09 17:48:01+08:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Instance ID : uuid:e495cb4c-af93-4aa2-a0bd-ef0b52dd6b11 Original Document ID : xmp.did:A8AE6C560D2068118083BA3D86063F49 Document ID : xmp.id:420633d0-de3e-48a2-8adb-67683eb405d4 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:733deba9-8b37-4b95-bd48-3e3a063ebdff Derived From Document ID : xmp.did:B9B1AFEB563AE711B6B48DD482D4FEBA Derived From Original Document ID: xmp.did:A8AE6C560D2068118083BA3D86063F49 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:06:02 12:38:17-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2017 (Macintosh)EXIF Metadata provided by EXIF.tools