NEW POS Technology 5310 Unattended Terminal User Manual

NEW POS Technology Limited Unattended Terminal Users Manual

Users Manual

NEW5310 www.newpostech.comUnattended TerminalN E W 5 3 1 0PRODUCT MANUALNEW POS TECHNOLOGYNEW POS TECHNOLOGY  LIMITEDNEW POS Technology limitedContents ChecklistThe following items should be found inside the box:Precautions Do not use the non-dedicated power supply, because it may be in trouble due to the mismatch of power. Do not vibrate, shake or knock the product sharply. When  a fault occurs, immediately  turn off the  power supply  and discontinue to use the product, please contact the service sector related to our company. Do not open and repair it by yourself. When the terminal being attacked by unscrupulous environment(such as opening the terminal shell,  etc.), the internal sensitive information stored in the terminal will  be  erased.  For  avoiding  unnecessary  trouble,  you  should  not  open  the housing.  NEW5310  is  designed  to  be  unattended  terminals,  it  is  used  outdoors,  Please follow as below:1. The device should be covered by a pin shield over the pin entry area.2. Avoiding the direct sunlight and the rain.3. Place the device in a ventilated locality and keep good a heat dissipation     condition.1. POS terminal               2. Product Manual3. Microfit power cable1PCS1PCS1PCS1. Warranty valid for 12 months after purchasing date.2. This warranty will be voided if the product is damaged due to natural disaster,      fire, unauthorized alteration or improper usage.3. Free Warranty covers original parts only4. Warranty service will not be provided if no the dealer's stamp or this card is     missing.Note:This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
www.newpostech.com www.newpostech.comNEW5310 www.newpostech.comNEW5310NEW5310 FigureNEW POS Technology limitedNEW POS Technology limitedMagnetic stripe cardUser smart card slotLCDNFC ledsAntennainductive zone1Camera4Menu forsetupResetSIM/SAM card coverTag labelInfrared LEDInfrared sensorWaterproof ringPort cover
www.newpostech.comNEW5310 www.newpostech.comwww.newpostech.comNEW5310NEW POS Technology limited Open the battery cover and remove the battery. Keep the chip side on the SIM/SAM/TF card downward and unfilled corner outward, insert the card to the bottom.Installation Guidance1. Install SIM/SAM/TF cardNOTE: 1. Confirm the machine is turned off when you install or uninstall the SIM/UIM card, or                  your card will be damaged.            2. Do not paste any label on the SIM/SAM card to influence your card thickness, or it              may result in loading or removing the card can not be carried out smoothly.2. Power on/off the devicePower on:  Plug the Mircrofit jack or the MDB jack into the socket, the device can turn on the power automatically.Power off:  Pull the Mircrofit jack and the MDB jack away from the socket, the device can turn off the power.       Reset:  Press the “R” button which is on the back of the device.    Setting:  Press the ”M” button which is on the back of the device.NEW POS Technology limitedUSB-deviceRS232PortUSB-hostEthernetMDBMicrofitAudio18192021SAMTFSIM
TechnicalProjectHigh Performance 4 Core Processor + Secure CPU1GB RAM, 8GB Flash memory, Support Micro TF Card, up to 32GBAndroid 5.X5”, 720x1280 pixels, support capacitate touch screenTrack 1/2/3, bi-directioanl, compliant with ISO7811,78121 user card (EMV4.3), Support Memory Card, CPU Card, EMV4.3, PBOC3.0, ISO7816 Standard.13.56MHz. Support Mifare Card, Compliant with ISO/IEC14443 Type A&B1 PSAM slot1 TF Card slotSupport PIN Entry from touch screenRS-232, Ethernet 10/100M, MDBEthernet (8P8C), RS232 (6P6C, with power output 12V/0.5A)Micro fit 43045, power input socket, MDB (24~45 VDC)USB Host, USB Device1 key for reset, 1 key for volume+1 Built-in speaker Infrared sensor, the distance of reaction is about 20CM~50CM12V DC, 2A (when using Micro fit), 24 ~ 45V DC (when using MDB)Input 100~240 VAC, 50 ~ 60 Hz; output 12V DC 2AANSI/UL 94 V-0IP65IK08 Temperature: -20℃ ~ 45℃(-4℉~ 113℉)Humidity: 10% ~ 90% (non-condense)Temperature: -25℃ ~ 75℃(-13℉~167℉)Humidity: 0% ~ 95% (non-condense)195*122*94mmUndeterminedPCI PTS 5.X, EMV LEVEL 1&2, EMV Contactless, CE, FCC, Pay PassProcessorMemorySystemDisplayMagnetic Card ReaderIC Card ReaderContactless Card ReaderPSAMTF CardInternal PEDCommunicationsInterfacesButtonAudioProximity detectorPower SupplyPower adapterFlammability ratingDust/waterproof ratingProtection classificationWorking EnvironmentStorage EnvironmentSizeWeightCertificationwww.newpostech.comNEW5310Technical SpecificationsNEW POS Technology limitedNEW POS Technology limitedNEW   POS   TECHNOLOGY   LIMITEDAddress:  14/A,  Financial  Technology  Building,  Financial  &  Technology                  Building, No.11, Keyuan Rd, Nanshan District, ShenZhen, ChinaTel: +86-755-86938425                                        Fax: +86-755-82790632E-mail: Sales@newpostech.com                             Postalcode: 518057WebSite: www.newpostech.comNotice: This device may be used in each member state in EU1. This device complies with Part 15 of the FCC Rules. Operation is subject to the      following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that       may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a  Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which        the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.RF exposure information: The EIRP power of the device at maximal case is below RF exposure assessment has been performed to prove that this unit will not generate the exemt condition, 20mW specified in EN62479: 2010.  the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC).Hereby, NEW POS TECHNOLOGY LIMITED declares that the radio equipment type (Unattended Terminal, NEW5310) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:www.newpostech.comThe grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.only NFC 13.56MHz in this sample

Navigation menu