NEW POS Technology 5310 Unattended Terminal User Manual
NEW POS Technology Limited Unattended Terminal Users Manual
Users Manual
NEW POS Technology limited NEW POS TECHNOLOGY Precautions Do not use the non-dedicated power supply, because it may be in trouble due to the mismatch of power. Do not vibrate, shake or knock the product sharply. When a fault occurs, immediately turn off the power supply and discontinue to use the product, please contact the service sector related to our company. NEW5310 Unattended Terminal PRODUCT MANUAL Do not open and repair it by yourself. When the terminal being attacked by unscrupulous environment(such as opening the terminal shell, etc.), the internal sensitive information stored in the terminal will be erased. For avoiding unnecessary trouble, you should not open the housing. NEW5310 is designed to be unattended terminals, it is used outdoors, Please follow as below: 1. The device should be covered by a pin shield over the pin entry area. 2. Avoiding the direct sunlight and the rain. 3. Place the device in a ventilated locality and keep good a heat dissipation condition. Note: 1. Warranty valid for 12 months after purchasing date. 2. This warranty will be voided if the product is damaged due to natural disaster, fire, unauthorized alteration or improper usage. 3. Free Warranty covers original parts only 4. Warranty service will not be provided if no the dealer's stamp or this card is missing. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Contents Checklist The following items should be found inside the box: 1. POS terminal 2. Product Manual 3. Microfit power cable 1PCS 1PCS 1PCS NEW POS TECHNOLOGY LIMITED NEW5310 www.newpostech.com NEW POS Technology limited NEW POS Technology limited NEW5310 Figure NFC leds Camera Infrared LED Infrared sensor Port cover LCD Antenna inductive zone Magnetic stripe card SIM/SAM card cover Menu for setup Reset Waterproof ring User smart card slot NEW5310 Tag label www.newpostech.com NEW5310 www.newpostech.com NEW POS Technology limited Port NEW POS Technology limited Installation Guidance 18 USB-device 20 Ethernet 1. Install SIM/SAM/TF card Open the battery cover and remove the battery. Keep the chip side on the SIM/SAM/TF card downward and unfilled corner outward, insert 19 RS232 the card to the bottom. USB-host MDB 21 Audio SAM Microfit TF SIM NOTE: 1. Confirm the machine is turned off when you install or uninstall the SIM/UIM card, or your card will be damaged. 2. Do not paste any label on the SIM/SAM card to influence your card thickness, or it may result in loading or removing the card can not be carried out smoothly. 2. Power on/off the device Power on: Plug the Mircrofit jack or the MDB jack into the socket, the device can turn on the power automatically. Power off: Pull the Mircrofit jack and the MDB jack away from the socket, the device can turn off the power. Reset: Press the “R” button which is on the back of the device. Setting: Press the ”M” button which is on the back of the device. NEW5310 www.newpostech.com NEW5310 www.newpostech.com NEW POS Technology limited Technical Specifications Project Technical Processor Memory System Display Magnetic Card Reader IC Card Reader High Performance 4 Core Processor + Secure CPU 1GB RAM, 8GB Flash memory, Support Micro TF Card, up to 32GB Android 5.X 5”, 720x1280 pixels, support capacitate touch screen Track 1/2/3, bi-directioanl, compliant with ISO7811,7812 1 user card (EMV4.3), Support Memory Card, CPU Card, EMV4.3, PBOC3.0, ISO7816 Standard. Contactless Card Reader 13.56MHz. Support Mifare Card, Compliant with ISO/IEC14443 Type A&B PSAM 1 PSAM slot TF Card 1 TF Card slot Internal PED Support PIN Entry from touch screen Communications RS-232, Ethernet 10/100M, MDB Interfaces Ethernet (8P8C), RS232 (6P6C, with power output 12V/0.5A) Micro fit 43045, power input socket, MDB (24~45 VDC) USB Host, USB Device Button 1 key for reset, 1 key for volume+ Audio 1 Built-in speaker Proximity detector Infrared sensor, the distance of reaction is about 20CM~50CM Power Supply 12V DC, 2A (when using Micro fit), 24 ~ 45V DC (when using MDB) Power adapter Input 100~240 VAC, 50 ~ 60 Hz; output 12V DC 2A Flammability rating ANSI/UL 94 V-0 Dust/waterproof rating IP65 Protection classification IK08 Working Temperature: -20℃ ~ 45℃(-4℉~ 113℉) Environment Humidity: 10% ~ 90% (non-condense) Storage Temperature: -25℃ ~ 75℃(-13℉~167℉) Environment Humidity: 0% ~ 95% (non-condense) Size 195*122*94mm Weight Undetermined Certification PCI PTS 5.X, EMV LEVEL 1&2, EMV Contactless, CE, FCC, Pay Pass RF exposure information: The EIRP power of the device at maximal case is below the exemt condition, 20mW specified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC). only NFC 13.56MHz in this sample NEW5310 www.newpostech.com NEW POS Technology limited Hereby, NEW POS TECHNOLOGY LIMITED declares that the radio equipment type (Unattended Terminal, NEW5310) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:www.newpostech.com Notice: This device may be used in each member state in EU 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. NEW POS TECHNOLOGY LIMITED Address: 14/A, Financial Technology Building, Financial & Technology Building, No.11, Keyuan Rd, Nanshan District, ShenZhen, China Tel: +86-755-86938425 Fax: +86-755-82790632 E-mail: Sales@newpostech.com Postalcode: 518057 WebSite: www.newpostech.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 4 Create Date : D:20180425024640Z Modify Date : D:20180425024640Z Producer : Corel PDF Engine Version 14.0.0.653 Author : Administrator Creator : CorelDRAW Title : 5310英文说明书-达培明.cdrEXIF Metadata provided by EXIF.tools