NEXCOM VTC6110X00 Intelligent Vehicle Telematics Computer User Manual 4
NEXCOM international Co.,LTD Intelligent Vehicle Telematics Computer 4
NEXCOM >
Contents
- 1. User manual1
- 2. User manual2
- 3. User manual3
- 4. User manual4
- 5. User Manual4
User Manual4
Chapter 3: System Setup Installing the USB Cable Holder 2. Hook the cable to the holder as shown in the photo below. The USB cable holder is used to stabilize the USB cable so as to prevent it from getting loose when accidentally pulled or moved. 1. Attach the cable holder to the mounting hole by using the provided screw. Cable holder Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 57 VTC 6110 User Manual Chapter 3: System Setup Rackmount Brackets 2. Now mount the system on the wall by fastening screws through the bracket’s mounting holes. The rackmount brackets provide a convenient and economical way of mounting the system on the wall. 1. The mounting holes are located at the bottom of the system. Secure the brackets on each side of the system using the provided mounting screws. Fasten screws to mount the system to the wall Secure the bracket to the system Rackmount bracket Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 58 VTC 6110 User Manual Appendix A: I/O Address Function Appendix A: I/O Address Function Capacity of NEXCOM battery (8 bits) I/O port : 0EE1H GPIO LED / UMTS LED / Ignition Status I/O port : 0EE0H Bit Bit 0 Bit 1 Bit0 Function Description Description GPIO LED 0: OFF (default) 1: ON Ignition (read only) 0: OFF 1: ON Bit 3 Status of Vehicle Battery 0: Vehicle Battery is OK 1: Vehicle Battery is Low Voltage Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. Bit2 Bit3 Bit4 Bit5 Bit6 Bit7 8 bits data (Bit 7 is highest bit of data) Voltage of NEXCOM battery (8 bits) I/O port : 0EE2H UMTS LED 0: LED for WLAN (default) 1: LED for 3.5G and WLAN Bit 2 Bit1 Bit0 Description 59 Bit1 Bit2 Bit3 Bit4 Bit5 Bit6 Bit7 8 bits data (Bit 7 is highest bit of data) VTC 6110 User Manual Appendix A: I/O Address Function Status of NEXCOM battery (8 bits) I/O port : 0EE3H GPIO I/O port : 0EE4H Bit Function Description Bit Function Description Bit 0 Status for G sensor detection 0: Normal 1: Abnormal (X-axis or Y-axis degree is about 90 or -90) Bit 0-3 GPO 1-4 Bit 4-7 GPI 1-4 Bit 1 Power mode 0: 24V system 1: 12V system Bit 2 Fan mode 0: Auto 1: Always on Bit 3 Status of Smart battery 0: No discharging 1: Discharging Bit 4 Status of Fan R 0: Well 1: Failed Bit 5 Status of Fan R 0: Action 1: Inaction Bit 6 Status of Fan L 0: Well 1: Failed Bit 7 Status of Fan L 0: Action 1: Inaction Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 60 VTC 6110 User Manual Appendix A: I/O Address Function WDT I/O port : 0EE5H Onboard Module Disable/Enable I/O port : 0EE6H Bit Function Description Bit Function Description Bit 3 WDT Disable/Enable 0: Disable (default) 1: Enable Bit 0 3.5G module 0: Disable 1: Enable (default) Bit 1 WLAN module 0: Disable 1: Enable (default) Bit 2 External +12V power 0: Disable 1: Enable (default) Bit 3 External +5V power 0: Disable 1: Enable (default) Bit 2, 1, 0: Time Setting Bit 2~0 Time (sec) 000 1 (default) 001 010 011 100 16 101 32 110 64 111 128 Auto clear WDT timer when reading/writing I/O port 0EE5H. Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 61 VTC 6110 User Manual Appendix B: ICES200-L24 COM Express CPU Module Appendix B: ICES200-L24 COM Express CPU Module Overview Key Features ICES 200 is a Type 2 COM Express Module that features Intel® 945GME and ICH7M chipset; switch supports Intel® Core™ 2 Duo and Intel® Core™ 2 Duo LV processors with 533/667 MHz FSB. One DDR2 memory socket supports up to 2GB. The ICES 200 is integrated with Intel® Graphics Media Accelerator (GMA950) and expands via PCI Express Graphics x16 lanes to the carrier board. It also supports other display interfaces including LFP or Dual channel LVDS. • Intel® Socket M supports Core™ 2 Duo / Core™ 2 Duo LV Processor Family • Intel® 945GME Chipset • One DDR2 SO-DIMM socket supports un-buffered non-ECC DDR2 533/667 up to 2GB • Supports 2 x Serial ATA for high speed drives, 8 x USB 2.0 for fast peripherals • Type 2 COM Express Module supports up to 21 Express lanes, 32 bit PCI interface, one IDE and Gigabit LAN The high performance ICES 200 COM Express Module supports 2 x SATA, 8 x USB 2.0 and 4 PCIe x1 Lanes through the carrier board. Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 62 VTC 6110 User Manual Appendix B: ICES200-L24 COM Express CPU Module Specifications Display • Integrated with Intel® Graphics Media Accelerator (GMA950) or expand via PCI Express Graphics x16 lanes / Dual SDVO • CRT resolution up to 2048 x 1536 @ 60Hz, 1600 x 1200 @ 85Hz • One PCI Express x16 Lane down to the carrier board • Supports LFP (Local Flat Panel) LVDS interface with resolution up to 1366 x 768 • Supports Single channel for 18 bit / Dual Channel for 18 bit CPU Support • Supports Intel® Socket M, Core™ 2 Duo Family Processors • Supports 533/667MHz FSB CPU Main Memory • 1 x DDR2 SO-DIMM socket Chipset • Intel® 945GME • ICH7M I/O Controller Hub Audio • HD audio interface COM Express Connectors • AB - VGA / LVDS / 8 x USB 2.0 / HD Audio / 2 x SATA / LAN / GPIO / LPC bus / 1 x PCIe x4 / 1 x PCIe x1 / 5 x PCIe x1 / SMBus (I2C) / SPI BIOS • CD - PCIe x16 / IDE / PCI BIOS • Award System BIOS • Plug & Play support • 8Mbit Flash ROM Onboard LAN • Realtek PCI Express GbE 8111C-GR • Supports PXE LAN boot function • Supports Wake on LAN System Monitor • Derived from HW monitor • Monitors 4 voltages, 2 temperatures and 1 fan speed • 4 voltages (For +3.3 V, +5 V, +12 V, Vcore) • 2 temperatures (CPU and one external Temperature Sensor) Power Requirements • + 12 V, + 5 VSB, + 3.3 V RTC Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 63 VTC 6110 User Manual Appendix B: ICES200-L24 COM Express CPU Module Dimensions • COM Express Basic Module Type 2 • 95mm x 125mm Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 64 VTC 6110 User Manual Appendix B: ICES200-L24 COM Express CPU Module Mechanical Dimensions Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 65 VTC 6110 User Manual Appendix B: ICES200-L24 COM Express CPU Module PCI Routing Slot / Device Signal Slot / Device 0 Slot / Device 1 Slot / Device 2 Slot / Device 3 IDSEL AD20 AD21 AD22 AD23 INTA# IRQA IRQB IRQC IRQD INTB# IRQB IRQC IRQD IRQA INTC# IRQC IRQD IRQA IRQB INTD# IRQD IRQA IRQB IRQC COM Express Module Connector Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 66 VTC 6110 User Manual Appendix B: ICES200-L24 COM Express CPU Module Connectors Row A GBE0_MDI0+ B13 SMB_CK A68 PCIE_TX0+ B68 PCIE_RX0+ GBE0_CTREF B14 SMB_DAT A69 PCIE_TX0- B69 PCIE_RX0- A15 SUS_S3# B15 SMB_ALERT# A70 GND B70 GND A16 SATA0_TX+ B16 SATA1_TX+ A71 LVDS_A0+ B71 LVDS_B0+ A17 SATA0_TX- B17 SATA1_TX- A72 LVDS_A0- B72 LVDS_B0- A18 SUS_S4# B18 SUS_STAT# A73 LVDS_A1+ B73 LVDS_B1+ A19 SATA0_RX+ B19 SATA1_RX+ A74 LVDS_A1+ B74 LVDS_B1- A20 SATA0_RX- B20 SATA1_RX- A75 LVDS_A2+ B75 LVDS_B2+ A21 GND B21 GND A76 LVDS_A2+ B76 LVDS_B2- A22 NC B22 NC A77 LVDS_VDD_EN B77 LVDS_B3+ A23 NC B23 NC A78 LVDS_A3+ B78 LVDS_B3- A24 SUS_S5# B24 PWR_OK A79 LVDS_A3+ B79 LVDS_BKLT_EN A25 NC B25 NC A80 GND B80 GND Row B A26 NC B26 NC A81 LVDS_A_CK+ B81 LVDS_B_CK+ PCIE_RX4- A27 BATLOW# B27 NC A82 LVDS_A_CK- B82 LVDS_B_CK- A28 ATA_ACT# B28 AC_SDIN2 A83 LVDS_I2C_CK B83 LVDS_BKLT_ CTRL A29 AC_SYNC B29 AC_SDIN1 A84 LVDS_I2C_DAT B84 VCC_5V_SBY A30 AC_RST# B30 AC_SDIN0 A85 GPI3 B85 VCC_5V_SBY A31 GND B31 GND A86 KBD_RST# B86 VCC_5V_SBY A32 AC_BITCLK B32 SPKR A87 KBD_A20GATE B87 VCC_5V_SBY A33 AC_SDOUT B33 I2C_CK A88 PCIE0_CK_REF+ B88 RSVD A34 BIOS_DISABLE# B34 I2C_DAT A89 PCIE0_CK_REF- B89 VGA_RED A35 THRMTRIP# B35 THRM# A90 GND B90 GND A36 USB6- B36 USB7- A91 RSVD B91 VGA_GRN A37 USB6+ B37 USB7+ A92 RSVD B92 VGA_BLU A38 USB_6_7_OC# B38 USB_4_5_OC# A93 GPO0 B93 VGA_HSYNC A39 USB4- B39 USB5- A94 RSVD B94 VGA_VSYNC B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71 B72 B73 B74 B75 B76 B77 B78 B79 B80 B81 B82 B83 B84 B85 B86 B87 B88 B89 B90 B91 B92 B93 B94 B95 B96 B97 B98 B99 B100 B101 B102 B103 B104 B105 B106 B107 B108 B109 B110 J1 COM Express B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71 B72 B73 B74 B75 B76 B77 B78 B79 B80 B81 B82 B83 B84 B85 B86 B87 B88 B89 B90 B91 B92 B93 B94 B95 B96 B97 B98 B99 B100 B101 B102 B103 B104 B105 B106 B107 B108 B109 B110 MH2 MH1 MH2 MH1 COM Express Connector A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A69 A70 A71 A72 A73 A74 A75 A76 A77 A78 A79 A80 A81 A82 A83 A84 A85 A86 A87 A88 A89 A90 A91 A92 A93 A94 A95 A96 A97 A98 A99 A100 A101 A102 A103 A104 A105 A106 A107 A108 A109 A110 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A69 A70 A71 A72 A73 A74 A75 A76 A77 A78 A79 A80 A81 A82 A83 A84 A85 A86 A87 A88 A89 A90 A91 A92 A93 A94 A95 A96 A97 A98 A99 A100 A101 A102 A103 A104 A105 A106 A107 A108 A109 A110 Row A Connector Pin Definition A1 GND B1 GND Row A A56 PCIE_TX4- B56 A2 GBE0_MDI3- B2 GBE0_ACT# A57 GND B57 GPO2 A3 GBE0_MDI3+ B3 LPC_FRAME# A58 PCIE_TX3+ B58 PCIE_RX3+ A4 GBE0_LINK100# B4 LPC_AD0 A59 PCIE_TX3- B59 PCIE_RX3- A5 GBE0_LINK1000# B5 LPC_AD1 A60 GND B60 GND A6 GBE0_MDI2- B6 LPC_AD2 A61 PCIE_TX2+ B61 PCIE_RX2+ A7 GBE0_MDI2+ B7 LPC_AD3 A62 PCIE_TX2- B62 PCIE_RX2- A8 GBE0_LINK# B8 LPC_DRQ0# A63 GPI1 B63 GPO3 A9 GBE0_MDI1- B9 LPC_DRQ1# A64 PCIE_TX1+ B64 PCIE_RX1+ A10 GBE0_MDI1+ B10 LPC_CLK A65 PCIE_TX1- B65 PCIE_RX1- A11 GND B11 GND A66 GND B66 WAKE0# A12 GBE0_MDI0- B12 PWRBTN# A67 GPI2 B67 WAKE1# Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. Row B A14 Row B Row B Row A A13 High Speed Board-to-Board Connector: COM Express Row A and Row B Connector size: 2 X 110 = 220 Pins Connector location: J2 Row A Row B 67 VTC 6110 User Manual Appendix B: ICES200-L24 COM Express CPU Module Row A Row B Row A Row B A40 USB4+ B40 USB5+ A95 RSVD B95 VGA_I2C_CK A41 GND B41 GND A96 GND B96 VGA_I2C_DAT A42 USB2- B42 USB3- A97 VCC_12V B97 NC A43 USB2+ B43 USB3+ A98 VCC_12V B98 NC A44 USB_2_3_OC# B44 USB_0_1_OC# A99 VCC_12V B99 NC A45 USB0- B45 USB1- A100 GND B100 GND A46 USB0+ B46 USB1+ A101 VCC_12V B101 VCC_12V A47 VCC_RTC B47 NC A102 VCC_12V B102 VCC_12V A48 EXCD0_PERST# B48 NC A103 VCC_12V B103 VCC_12V A49 EXCD0_CPPE# B49 SYS_RESET# A104 VCC_12V B104 VCC_12V A50 LPC_SERIRQ B50 CB_RESET# A105 VCC_12V B105 VCC_12V A51 GND B51 GND A106 VCC_12V B106 VCC_12V A52 NC B52 NC A107 VCC_12V B107 VCC_12V A53 NC B53 NC A108 VCC_12V B108 VCC_12V A54 GPI0 B54 GPO1 A109 VCC_12V B109 VCC_12V A55 PCIE_TX4+ B55 PCIE_RX4+ A110 GND B110 GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 68 VTC 6110 User Manual Appendix B: ICES200-L24 COM Express CPU Module High Speed Board-to-Board Connector: COM Express Row C and Row D Connector size: 2 X 110 = 220 Pins Connector location: J1 Row C C68 PEG_RX5+ D68 PEG_TX5+ C14 IDE_IOR# D14 IDE_A1 C69 PEG_RX5- D69 PEG_TX5- C15 PCI_PME# D15 IDE_A2 C70 GND D70 GND C16 PCI_GNT2# D16 IDE_CS1# C71 PEG_RX6+ D71 PEG_TX6+ C17 PCI_REQ2# D17 IDE_CS3# C72 PEG_RX6- D72 PEG_TX6- C18 PCI_GNT1# D18 IDE_RESET# C73 SDVO_DATA D73 SDVO_CLK C19 PCI_REQ1# D19 PCI_GNT3# C74 PEG_RX7+ D74 PEG_TX7+ C20 PCI_GNT0# D20 PCI_REQ3# C75 PEG_RX7- D75 PEG_TX7- C21 GND D21 GND C76 GND D76 GND C22 PCI_REQ0# D22 PCI_AD1 C77 RSVD D77 IDE_CBLID# C23 PCI_RESET# D23 PCI_AD3 C78 PEG_RX8+ D78 PEG_TX8+ Row D C24 PCI_AD0 D24 PCI_AD5 C79 PEG_RX8- D79 PEG_TX8- PEG_TX1- C25 PCI_AD2 D25 PCI_AD7 C80 GND D80 GND TYPE2# C26 PCI_AD4 D26 PCI_C/BE0# C81 PEG_RX9+ D81 PEG_TX9+ PCI_AD6 D27 PCI_AD9 C82 PEG_RX9- D82 PEG_TX9- J1 COM Express B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71 B72 B73 B74 B75 B76 B77 B78 B79 B80 B81 B82 B83 B84 B85 B86 B87 B88 B89 B90 B91 B92 B93 B94 B95 B96 B97 B98 B99 B100 B101 B102 B103 B104 B105 B106 B107 B108 B109 B110 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71 B72 B73 B74 B75 B76 B77 B78 B79 B80 B81 B82 B83 B84 B85 B86 B87 B88 B89 B90 B91 B92 B93 B94 B95 B96 B97 B98 B99 B100 B101 B102 B103 B104 B105 B106 B107 B108 B109 B110 IDE_A0 MH1 MH2 MH1 COM Express Connector A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A69 A70 A71 A72 A73 A74 A75 A76 A77 A78 A79 A80 A81 A82 A83 A84 A85 A86 A87 A88 A89 A90 A91 A92 A93 A94 A95 A96 A97 A98 A99 A100 A101 A102 A103 A104 A105 A106 A107 A108 A109 A110 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A69 A70 A71 A72 A73 A74 A75 A76 A77 A78 A79 A80 A81 A82 A83 A84 A85 A86 A87 A88 A89 A90 A91 A92 A93 A94 A95 A96 A97 A98 A99 A100 A101 A102 A103 A104 A105 A106 A107 A108 A109 A110 Row C Connector Pin Definition C1 C2 GND IDE_D7 D1 D2 GND IDE_D5 Row C C56 C57 PEG_RX1TYPE1# D56 D57 Row D D13 MH2 Row D Row C IDE_IORDY Row D Row C Row D C13 C3 IDE_D6 D3 IDE_D10 C58 PEG_RX2+ D58 PEG_TX2+ C27 C4 IDE_D3 D4 IDE_D11 C59 PEG_RX2- D59 PEG_TX2- C28 PCI_AD8 D28 PCI_AD11 C83 RSVD D83 RSVD C5 IDE_D15 D5 IDE_D12 C60 GND D60 GND C29 PCI_AD10 D29 PCI_AD13 C84 GND D84 GND C6 IDE_D8 D6 IDE_D4 C61 PEG_RX3+ D61 PEG_TX3+ C30 PCI_AD12 D30 PCI_AD15 C85 PEG_RX10+ D85 PEG_TX10+ C7 IDE_D9 D7 IDE_D0 C62 PEG_RX3- D62 PEG_TX3- C31 GND D31 GND C86 PEG_RX10- D86 PEG_TX10- RSVD C32 PCI_AD14 D32 PCI_PAR C87 GND D87 GND RSVD C33 PCI_C/BE1# D33 PCI_SERR# C88 PEG_RX11+ D88 PEG_TX11+ PEG_TX4+ C34 PCI_PERR# D34 PCI_STOP# C89 PEG_RX11- D89 PEG_TX11- PCI_LOCK# D35 PCI_TRDY# C90 GND D90 GND C8 C9 C10 IDE_D2 IDE_D13 IDE_D1 D8 D9 D10 IDE_REQ IDE_IOW# IDE_ACK# C63 C64 C65 RSVD RSVD PEG_RX4+ D63 D64 D65 C11 GND D11 GND C66 PEG_RX4- D66 PEG_TX4- C35 C12 IDE_D14 D12 IDE_IRQ C67 RSVD D67 GND C36 PCI_DEVSEL# D36 PCI_FRAME# C91 PEG_RX12+ D91 PEG_TX12+ C37 PCI_IRDY# D37 PCI_AD16 C92 PEG_RX12- D92 PEG_TX12- C38 PCI_C/BE2# D38 PCI_AD18 C93 GND D93 GND C39 PCI_AD17 D39 PCI_AD20 C94 PEG_RX13+ D94 PEG_TX13+ Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 69 VTC 6110 User Manual Appendix B: ICES200-L24 COM Express CPU Module Row C Row D Row C Row D C40 PCI_AD19 D40 PCI_AD22 C95 PEG_RX13- D95 PEG_TX13- C41 GND D41 GND C96 GND D96 GND C42 PCI_AD21 D42 PCI_AD24 C97 RSVD D97 PEG_ENABLE# C43 PCI_AD23 D43 PCI_AD26 C98 PEG_RX14+ D98 PEG_TX14+ C44 PCI_C/BE3# D44 PCI_AD28 C99 PEG_RX14- D99 PEG_TX14- C45 PCI_AD25 D45 PCI_AD30 C100 GND D100 GND C46 PCI_AD27 D46 PCI_IRQC# C101 PEG_RX15+ D101 PEG_TX15+ C47 PCI_AD29 D47 PCI_IRQD# C102 PEG_RX15- D102 PEG_TX15- C48 PCI_AD31 D48 PCI_CLKRUN# C103 GND D103 GND C49 PCI_IRQA# D49 PCI_M66EN C104 VCC_12V D104 VCC_12V C50 PCI_IRQB# D50 PCI_CLK C105 VCC_12V D105 VCC_12V C51 GND D51 GND C106 VCC_12V D106 VCC_12V C52 PEG_RX0+ D52 PEG_TX0+ C107 VCC_12V D107 VCC_12V C53 PEG_RX0- D53 PEG_TX0- C108 VCC_12V D108 VCC_12V C54 TYPE0# D54 PEG_LANE_RV# C109 VCC_12V D109 VCC_12V C55 PEG_RX1+ D55 PEG_TX1+ C110 GND D110 GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 70 VTC 6110 User Manual Appendix B: ICES200-L24 COM Express CPU Module PCIE 1X4 or PCIE 4X1 SWITCH SW1 ON SW_DIP-2 Pin Status Config 1 and 2 OFF PCIE 4X1 1 and 2 ON PCIE 1X4 Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 71 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Appendix C: VTCB6110 Carrier Board Specifications I/O Interfaces - Front • 4 SMA-type mounting holes for WLAN, HSDPA and Bluetooth • 1 power button • 1 reset switch • 1 SIM card socket • 1 USB 2.0 • 4 LEDs for Standby, HDD, WLAN/HSDPA and GPO • 1 line-out • 1 mic-in Dimensions Expansion • 1 PCI-104 socket • 1 Bluetooth module (optional) • 2 Mini PCI Express socket - 1 PCIe interface for WLAN module - 1 PCIe + USB interface for 3.5G module Storage • One SATA 2.5” HDD bay • One internal Type I/ II CompactFlash socket • 260mm(W) x 176mm(D) x 50mm(H) 10.24”(W) x 7”(D) x 1.97”(H) I/O Interfaces - Front • • • • • • • • 4 SMA-type mounting holes for WLAN, HSDPA and Bluetooth 1 power button 1 reset switch 1 SIM card socket 1 USB 2.0 4 LEDs for Standby, HDD, WLAN/HSDPA and GPO 1 line-out 1 mic-in Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 72 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Jumpers and Connectors SW5 SW4 SW2 SW3 LED1 LED2 SW1 J2 USB1 J4 JP6 J3 Blue Tooth 10 JP5 J7 10 21 13 JP7 JP8 J14 29 JP4 J12 15 16 JP2 BZ1 17 18 3.5G CN16 JP3 CN4 CN17 J1 J9 J11 CN14 SW7 J13 CN15 51 52 12 JP1 24 CN6 17 18 51 52 J6 15 16 CN7 CN9 J10 SW6 10 10 10 30 29 CN11 CN3 USB2 LAN1 CON1 CN5 COM1 J5 CN2 CN12 J8 WLAN CN1 CN8 Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 73 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Jumper Settings LVDS Power Input Voltage Select (JP9) Pin SW5: Input Voltage Selection SW5 / Input Voltage 12V (default) 24V 6V~36V SW5.1 OFF OFF ON SW5.2 OFF ON Ignore RS232 (default) RS485 SW6.1 OFF ON SW6.2 OFF ON SW6.3 OFF ON Status Function Description 1-2 Short Slave 2-3 (default) Short (default) Master Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 1-2 Short +5V IN 2-3 (default) Short (default) +3.3V IN Pin Status Function Description 1-2 (default) Short (default) VBAT IN 2-3 Short Clear CMOS Status Function Description BIOS Function Select (J1) Pin CF (IDE0) Primary Master/Slave Select (JP4) Pin Function Description CMOS Input Voltage Select (J6) SW6: COM Port Mode Selection SW6 COM Port Mode Status 1-2 Short Disable carrier board BIOS 2-3 (default) Short (default) Disable module board BIOS DC Input Voltage Select (JP1) 74 Pin Status Function Description 1-2 (default) Short (default) IGNITION 2-3 Short VIN_M VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Temp Sensor (JP8) GAL Download (JP5) Pin Function Description Pin Function Description SENSOR+ +V3.3S GND GND Auto Power Select (JP2) TCK TDO Pin Status Function Description TDI 1-2 (default) Short (default) AUTO TMS 2-3 Short BUTTON CONTROL MCU COM Port (JP3) PCI-104 VI/O Select Voltage (J13) Pin Function Description Pin Status Function Description TX 1-4(*) Short* +3.3V RX 3-6 Short +5V GND MCU Download (JP6) Pin Function Description +V3.3ALW C2D MRST C2CK GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 75 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Connectors Row A SMB_CK A68 PCIE_TX0+ B68 PCIE_RX0+ A14 GBE0_CTREF B14 SMB_DAT A69 PCIE_TX0- B69 PCIE_RX0- A15 SUS_S3# B15 SMB_ALERT# A70 GND B70 GND A16 SATA0_TX+ B16 NC A71 LVDS_A0+ B71 NC A17 SATA0_TX- B17 NC A72 LVDS_A0- B72 NC A18 SUS_S4# B18 SUS_STAT# A73 LVDS_A1+ B73 NC A19 SATA0_RX+ B19 NC A74 LVDS_A1+ B74 NC A20 SATA0_RX- B20 NC A75 LVDS_A2+ B75 NC A21 GND B21 GND A76 LVDS_A2+ B76 NC A22 NC B22 NC A77 LVDS_VDD_EN B77 NC A23 NC B23 NC A78 LVDS_A3+ B78 NC A24 SUS_S5# B24 PWR_OK A79 LVDS_A3+ B79 LVDS_BKLT_EN A25 NC B25 NC A80 GND B80 GND Row B A26 NC B26 NC A81 LVDS_A_CK+ B81 NC B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71 B72 B73 B74 B75 B76 B77 B78 B79 B80 B81 B82 B83 B84 B85 B86 B87 B88 B89 B90 B91 B92 B93 B94 B95 B96 B97 B98 B99 B100 B101 B102 B103 B104 B105 B106 B107 B108 B109 B110 J1 COM Express B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71 B72 B73 B74 B75 B76 B77 B78 B79 B80 B81 B82 B83 B84 B85 B86 B87 B88 B89 B90 B91 B92 B93 B94 B95 B96 B97 B98 B99 B100 B101 B102 B103 B104 B105 B106 B107 B108 B109 B110 Row B MH2 MH1 MH2 MH1 COM Express Connector A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A69 A70 A71 A72 A73 A74 A75 A76 A77 A78 A79 A80 A81 A82 A83 A84 A85 A86 A87 A88 A89 A90 A91 A92 A93 A94 A95 A96 A97 A98 A99 A100 A101 A102 A103 A104 A105 A106 A107 A108 A109 A110 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A69 A70 A71 A72 A73 A74 A75 A76 A77 A78 A79 A80 A81 A82 A83 A84 A85 A86 A87 A88 A89 A90 A91 A92 A93 A94 A95 A96 A97 A98 A99 A100 A101 A102 A103 A104 A105 A106 A107 A108 A109 A110 Row A Connector Pin Definition Row A Row B B13 Connector size: 2 x 110 = 220 pins Connector location: J4 Row B Row A GBE0_MDI0+ High Speed Board-to-Board Connector: COM Express Row A and Row B Row A Row B A13 A1 GND B1 GND A56 NC B56 NC A27 BATLOW# B27 NC A82 LVDS_A_CK- B82 NC A2 GBE0_MDI3- B2 GBE0_ACT# A57 GND B57 NC A28 ATA_ACT# B28 NC A83 LVDS_I2C_CK B83 A3 GBE0_MDI3+ B3 LPC_FRAME# A58 NC B58 NC LVDS_BKLT_ CTRL A4 NC B4 LPC_AD0 A59 NC B59 NC A29 AC_SYNC B29 NC A84 LVDS_I2C_DAT B84 VCC_5V_SBY A30 AC_RST# B30 AC_SDIN0 A85 NC B85 VCC_5V_SBY A31 GND B31 GND A86 NC B86 VCC_5V_SBY A32 AC_BITCLK B32 SPKR A87 NC B87 VCC_5V_SBY A33 AC_SDOUT B33 I2C_CK A88 PCIE0_CK_REF+ B88 RSVD A34 NC B34 I2C_DAT A89 PCIE0_CK_REF- B89 NC A35 NC B35 THRM# A90 GND B90 GND A36 USB6- B36 NC A91 RSVD B91 NC A37 USB6+ B37 NC A92 RSVD B92 NC A38 USB_6_7_OC# B38 USB_4_5_OC# A93 NC B93 NC A39 USB4- B39 USB5- A94 RSVD B94 NC A5 NC B5 LPC_AD1 A60 GND B60 GND A6 GBE0_MDI2- B6 LPC_AD2 A61 NC B61 NC A7 GBE0_MDI2+ B7 LPC_AD3 A62 NC B62 NC A8 A9 A10 A11 A12 GBE0_LINK# GBE0_MDI1GBE0_MDI1+ GND GBE0_MDI0- B8 B9 B10 B11 B12 NC NC LPC_CLK GND PWRBTN# A63 A64 A65 A66 A67 GPI1 NC NC GND NC Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. B63 B64 B65 B66 B67 GPO3 NC NC NC NC 76 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Row A Row B Row A Row B A40 USB4+ B40 USB5+ A95 RSVD B95 NC A41 GND B41 GND A96 GND B96 NC A42 USB2- B42 USB3- A97 VCC_12V B97 NC A43 USB2+ B43 USB3+ A98 VCC_12V B98 NC A44 USB_2_3_OC# B44 USB_0_1_OC# A99 VCC_12V B99 NC A45 USB0- B45 USB1- A100 GND B100 GND A46 USB0+ B46 USB1+ A101 VCC_12V B101 VCC_12V A47 VCC_RTC B47 NC A102 VCC_12V B102 VCC_12V A48 NC B48 NC A103 VCC_12V B103 VCC_12V A49 NC B49 SYS_RESET# A104 VCC_12V B104 VCC_12V A50 NC B50 CB_RESET# A105 VCC_12V B105 VCC_12V A51 GND B51 GND A106 VCC_12V B106 VCC_12V A52 NC B52 NC A107 VCC_12V B107 VCC_12V A53 NC B53 NC A108 VCC_12V B108 VCC_12V A54 NC B54 NC A109 VCC_12V B109 VCC_12V A55 NC B55 NC A110 GND B110 GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 77 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board High Speed Board-to-Board Connector: COM Express Row C and Row D Row C J1 COM Express B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71 B72 B73 B74 B75 B76 B77 B78 B79 B80 B81 B82 B83 B84 B85 B86 B87 B88 B89 B90 B91 B92 B93 B94 B95 B96 B97 B98 B99 B100 B101 B102 B103 B104 B105 B106 B107 B108 B109 B110 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31 B32 B33 B34 B35 B36 B37 B38 B39 B40 B41 B42 B43 B44 B45 B46 B47 B48 B49 B50 B51 B52 B53 B54 B55 B56 B57 B58 B59 B60 B61 B62 B63 B64 B65 B66 B67 B68 B69 B70 B71 B72 B73 B74 B75 B76 B77 B78 B79 B80 B81 B82 B83 B84 B85 B86 B87 B88 B89 B90 B91 B92 B93 B94 B95 B96 B97 B98 B99 B100 B101 B102 B103 B104 B105 B106 B107 B108 B109 B110 Connector size: 2 X 110 = 220 Pins Connector location: J3 Row D MH2 MH1 MH2 MH1 COM Express Connector A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A69 A70 A71 A72 A73 A74 A75 A76 A77 A78 A79 A80 A81 A82 A83 A84 A85 A86 A87 A88 A89 A90 A91 A92 A93 A94 A95 A96 A97 A98 A99 A100 A101 A102 A103 A104 A105 A106 A107 A108 A109 A110 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A69 A70 A71 A72 A73 A74 A75 A76 A77 A78 A79 A80 A81 A82 A83 A84 A85 A86 A87 A88 A89 A90 A91 A92 A93 A94 A95 A96 A97 A98 A99 A100 A101 A102 A103 A104 A105 A106 A107 A108 A109 A110 Row C Connector Pin Definition Row C Row D Row C Row D C1 GND D1 GND C56 NC D56 SDVOB_GREEN- C2 IDE_D7 D2 IDE_D5 C57 NC D57 NC C3 IDE_D6 D3 IDE_D10 C58 NC D58 SDVOB_BLUE+ C4 IDE_D3 D4 IDE_D11 C59 NC D59 SDVOB_BLUE- C5 IDE_D15 D5 IDE_D12 C60 GND D60 GND C6 IDE_D8 D6 IDE_D4 C61 NC D61 SDVO_CLK+ C7 IDE_D9 D7 IDE_D0 C62 NC D62 SDVO_CLK- C8 IDE_D2 D8 IDE_REQ C63 NC D63 NC C9 IDE_D13 D9 IDE_IOW# C64 NC D64 NC C10 IDE_D1 D10 IDE_ACK# C65 NC D65 NC C11 GND D11 GND C66 NC D66 NC C12 IDE_D14 D12 IDE_IRQ C67 NC D67 GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 78 Row D Row C Row D C13 IDE_IORDY D13 IDE_A0 C68 NC D68 NC C14 IDE_IOR# D14 IDE_A1 C69 NC D69 NC C15 NC D15 IDE_A2 C70 GND D70 GND C16 NC D16 IDE_CS1# C71 NC D71 NC C17 NC D17 IDE_CS3# C72 NC D72 NC C18 NC D18 IDE_RESET# C73 NC D73 SDVO_CLK C19 NC D19 NC C74 NC D74 NC C20 PCI_GNT0# D20 NC C75 NC D75 NC C21 GND D21 GND C76 GND D76 GND C22 PCI_REQ0# D22 PCI_AD1 C77 NC D77 IDE_CBLID# C23 PCI_RESET# D23 PCI_AD3 C78 NC D78 NC C24 PCI_AD0 D24 PCI_AD5 C79 NC D79 NC C25 PCI_AD2 D25 PCI_AD7 C80 GND D80 GND C26 PCI_AD4 D26 PCI_C/BE0# C81 NC D81 NC C27 PCI_AD6 D27 PCI_AD9 C82 NC D82 NC C28 PCI_AD8 D28 PCI_AD11 C83 NC D83 NC C29 PCI_AD10 D29 PCI_AD13 C84 GND D84 GND C30 PCI_AD12 D30 PCI_AD15 C85 NC D85 NC C31 GND D31 GND C86 NC D86 NC C32 PCI_AD14 D32 PCI_PAR C87 GND D87 GND C33 PCI_C/BE1# D33 PCI_SERR# C88 NC D88 NC C34 PCI_PERR# D34 PCI_STOP# C89 NC D89 NC C35 PCI_LOCK# D35 PCI_TRDY# C90 GND D90 GND C36 PCI_DEVSEL# D36 PCI_FRAME# C91 NC D91 NC C37 PCI_IRDY# D37 PCI_AD16 C92 NC D92 NC C38 PCI_C/BE2# D38 PCI_AD18 C93 GND D93 GND C39 PCI_AD17 D39 PCI_AD20 C94 NC D94 NC VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Row C Row D Row C Row D C40 PCI_AD19 D40 PCI_AD22 C95 PEG_RX13- D95 PEG_TX13- C41 GND D41 GND C96 GND D96 GND C42 PCI_AD21 D42 PCI_AD24 C97 RSVD D97 PEG_ENABLE# C43 PCI_AD23 D43 PCI_AD26 C98 PEG_RX14+ D98 PEG_TX14+ C44 PCI_C/BE3# D44 PCI_AD28 C99 PEG_RX14- D99 PEG_TX14- C45 PCI_AD25 D45 PCI_AD30 C100 GND D100 GND C46 PCI_AD27 D46 PCI_IRQC# C101 PEG_RX15+ D101 PEG_TX15+ C47 PCI_AD29 D47 PCI_IRQD# C102 PEG_RX15- D102 PEG_TX15- C48 PCI_AD31 D48 PCI_CLKRUN# C103 GND D103 GND C49 PCI_IRQA# D49 PCI_M66EN C104 VCC_12V D104 VCC_12V C50 PCI_IRQB# D50 PCI_CLK C105 VCC_12V D105 VCC_12V C51 GND D51 GND C106 VCC_12V D106 VCC_12V C52 PEG_RX0+ D52 PEG_TX0+ C107 VCC_12V D107 VCC_12V C53 PEG_RX0- D53 PEG_TX0- C108 VCC_12V D108 VCC_12V C54 TYPE0# D54 PEG_LANE_RV# C109 VCC_12V D109 VCC_12V C55 PEG_RX1+ D55 PEG_TX1+ C110 GND D110 GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 79 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board CompactFlash Connector Pin Connector size: 2 x 25 = 50 pins Connector location: J12 23 Data 2 24 IOCS16# (NC) 25 CF_CD2# (Pull-down) 26 CF_CD1# (Pull-down) 27 Data 11 28 Data 12 29 Data 13 30 Data 14 31 Data 15 32 HDC CS300 33 CF_VS1# (NC) 34 IOR 35 IOW 36 CF_WE# (+5V) 37 Interrupt 15 38 +5V 39 CF_CSEL# (Master or Slave) 40 CF_VS2# (NC) 41 Reset # 42 IOCHRDY 43 DMA REQ / DACK (NC) 44 DMA ACK# /CF_REG# (+5V) 45 HDD Active Led 46 DMA66 Detect / CF_PDIAG# 47 Data 8 48 Data 9 49 Data 10 50 Gnd 50 49 26 Connector Pin Definition Pin Description Pin Description Gnd Data 3 Data 4 Data 5 Data 6 Data 7 HDC CS100 Gnd Gnd 10 Gnd 11 Gnd 12 Gnd 13 +5V 14 Gnd 15 Gnd 16 Gnd 17 Gnd 18 Disk Address 2 19 Disk Address 1 20 Disk Address 0 21 Data 0 22 Data 1 Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 80 Description Pin Description VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board GPIO Connector RS232 Connector: COM1, COM2 Connector size: DSUB-9 pin Connector location: COM1 Connector size: 2 x 10 = 20 Pins Pin Header, (2.0 mm Pitch) Connector location: COM1 (CN9), COM2 (CN7) CN10 BOX-2.0mm-M-180 Connector Pin Definition Connector Pin Definition Pin Description 10 Pin Description Pin Definition Pin Definition GIN1 GIN2 DCD RXD GIN3 GIN4 TXD DTR GOUT4 GOUT1 Gnd DSR GOUT2 GOUT3 RTS CTS GND RI Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 81 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board RS232/485 Connector: COM3 GAL Programmer PIN Header Connector size: 2 x 10 = 20 Pins Pin Header, (2.0 mm Pitch) Connector location: CN12 Connector size: 2.54mm-M-180 Connector location: JP5 CN10 10 JP5 BOX-2.0mm-M-180 PIN-2.54mm-M-180 Connector Pin Definition Connector Pin Definition Pin Definition Pin DCD (RS232) TX-/RX- (RS485) Definition RXD (RS232) TX+/RX+ (RS485) TXD (RS232) DTR (RS232) Gnd DSR (RS232) RTS (RS232) CTS (RS232) RI (RS232) Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 82 Pin Definition Pin Definition +3.3V GND TCK TDO TDI TMS VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board MCU Programmer Pin Header VGA Connector Connector size: 2.54mm-M-180 Connector location: JP6 Connector size: DSUB-15 Connector location: CON1 JP6 PIN-2.54mm-M-180 Connector Pin Definition Connector Pin Definition Pin Definition Pin Definition Pin Definition Pin Definition +3.3ALW C2D BLUE NC C2CK Gnd Gnd Gnd Gnd VCC 10 Gnd 11 NC 12 DDCDAT 13 Hsync 14 Vsync 15 DDCCLK MRST GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 83 RED GREEN VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board LVDS Connector + USB0 Pin Connector size: 2 x 15 (2.0mm) Connector location: CN3 17 LVDS_5(OUT2) 18 Panel_backlight(+12V) 19 LVDS_4(OUT2#) 20 Panel_backlight(+12V) 21 LVDS_GND 22 Power on push buttom 23 USB_0# 24 USB_GND 25 USB_0 26 USB_VCC (+5V) 27 USB_GND 28 USB_GND 29 Panel_backlight(+12V) 30 GND CN3 11 13 15 17 19 21 23 25 27 29 10 12 14 16 18 20 22 24 26 28 30 Definition Pin Definition BOX-2.0mm-M-180 Connector Pin Definition Pin Definition Pin Definition LVDS_CLK LVDS_DAT Panel_VDD LVDS_1(OUT0) LVDS_9(OUT3) LVDS_0(OUT0#) LVDS_8(OUT3#) Panel_VDD LVDS_GND 10 LVDS_GND 11 LVDS_7(CLK) 12 LVDS_3(OUT1) 13 LVDS_6(CLK#) 14 LVDS_2(OUT1#) 15 LVDS_GND 16 LVDS_GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 84 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board LAN Connector USB Connector Connector size: RJ-45 Connector location: LAN1 Connector location: USB1 Connector Pin Definition Connector Pin Definition Pin Definition Pin Pin Definition TX+ TX- RX+ N/C1 N/C2 RX- N/C3 N/C4 LAN Speed LED 10 +3.3V 11 LAN Link LED 12 +3.3V Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 85 Definition Pin Definition VCC DATA- DATA+ GND VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board USB Connector LVDS Power Connector Connector location: USB2 Connector location: J5 Connector Pin Definition Connector Pin Definition Pin Pin Definition Definition VCC DATA1- DATA1+ GND VCC DATA- DATA+ GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 86 Pin Definition Pin Definition Panel_backlight Panel_VDD GND GND LVDS_PANEL LVDS_BIASON VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board External 12V & 5V Power and SMBUS Connector Mic-in Connector location: CN2 Connector location: CN11 and CN15 Connector Pin Definition Connector Pin Definition Pin Definition Pin 5V 12V SMBCLK GND GND SMBDATA Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. Pin Definition 87 Definition Pin Definition NC MIC_JD NC MIC_OUT GND GND VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Line-out PCI-104 VI/O Voltage Setting Connector location: CN8 and CN14 Connector location: J13 Connector Pin Definition Pin Definition Pin LINE_OUT_L SURR_JD NC LINE_OUT_R GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. Definition Connector Pin Definition GND 88 Pin No. Status 1-3, 2-4 (default) Short Function Description +3.3V 3-5, 4-6 Short +5V VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board PCI-104 Connector Power Button Connector location: CN16 Connector location: SW1 Connector Pin Definition Reset Button Connector location: SW2 Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 89 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board MCU COM Port ACC_ON LED Connector location: JP3 Connector location: JP7 Connector Pin Definition Pin Function Description TX RX Pin Function Description GND +3.3V LED GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. Connector Pin Definition 90 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Temp Sensor DC Power Input Connector Connector location: JP8 Connector location: CN1 Connector Pin Definition Pin Function Description SENSOR+ GND Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. Connector Pin Definition Pin 91 Function Description GND VIN (6V~36V) IGNITION VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Power On and IDE Active LED GPIO and UMTS LEDs Connector location: LED1 Connector location: LED2 T1 T2 B1 B2 LED I/O Port Address and Data Connector Pin Definition LED Function Description LED Function Description T1 POWER LED T2 I/O PORT Address: 0EE0; Bit0: 1 (Light), 0 (Dark) B1 HD LED B2 UMTS STATUS Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 92 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Serial ATA Serial ATA Power Input Connector location: CN6 Connector location: J10 Connector Pin Definition Connector Pin Definition Pin Definition Pin Definition Pin Definition GND SATA_TXP0 - +V12S GND SATA_TXN0 GND GND +V5S SATA_RXN0 SATA_RXP0 GND Pin Definition Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 93 VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Mini-PCIe Socket (for 3.5G module) PCIe Interface Mini-PCIe Socket (for WLAN module) USB + PCIe Interface Connector location: CN10 Connector location: CN13 52 52 51 51 Connector Pin Definition Pin Definition Pin Connector Pin Definition Definition Pin Definition Pin Definition Definition Pin Definition Pin Definition MIC + +V3.3S 27 GND 28 NC WAKE# +V3.3S 27 GND 28 +V1.5S MIC - GND 29 GND 30 NC NC GND 29 GND 30 SMB_CLK SPK + NC 31 NC 32 NC NC +V1.5S 31 PETn0 32 SMB_DATA GND USIM PWR 33 RESET 34 GND CLKREQ# NC 33 PETp0 34 GND GND 10 USIM DATa 35 GND 36 USB_D- GND 10 NC 35 GND 36 USB_D- 11 VCC_ MSM26_ DIG 12 USIM CLK 37 GND 38 USB_D+ 11 REFCLK- 12 NC 37 NC 38 USB_D+ 13 REFCLK+ 14 NC 39 NC 40 GND 13 NC 14 USIM RST 39 +V3.3S 40 GND 15 GND 16 NC 41 NC 42 15 GND 16 NC 41 +V3.3S 42 LED_ WWAN# LED_ WWAN# 17 NC 18 GND 43 NC 44 17 NC 18 GND 43 GND 44 NC LED_ WLAN# 19 NC 20 W_DISABLE# 45 NC 46 NC 19 NC 20 DISABLE# 45 NC 46 LED_ WPAN# 21 GND 22 NC 47 NC 48 NC 21 GND 22 PERST# 47 NC 48 +V1.5S 23 NC 24 NC 49 NC 50 GND 23 PERn0 24 +3.3S 49 NC 50 GND 25 NC 26 GND 51 NC 52 +V3.3S 25 PERp0 26 GND 51 NC 52 +V3.3S Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. Pin 94 Definition Pin VTC 6110 User Manual Appendix C: VTCB6110 Carrier Board Bluetooth Connector Connector location: CN4 Connector location: J7 MH2 MH1 SIM Card Connector 10 J7 JST-1mm-M-90 Pin Connector Pin Definition Pin Definition Pin Definition Pin Definition GND USB_6P_L Definition USB_6N_L NC NC BT_AUDIO_EN_R C1 POWER VOLTAGE C2 RESET SIGNAL C3 CLOCK SIGNAL C5 GND NC BT_3.3V I/O NC 10 GND C6 VPP:PROGRAM VOLTAGE SW Contact present switch C7 Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 95 VTC 6110 User Manual Appendix D: BIOS Setup Appendix D: Vehicle Power Management Setup External Power Output Setting External +12V and +5V Turn Off Simultaneously External +12V and +5V Turn On Simultaneously Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 96 VTC 6110 User Manual Appendix D: BIOS Setup External +5V Turn On Only External +12V Turn On Only Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 97 VTC 6110 User Manual Appendix D: BIOS Setup Startup and Shutdown Voltage Setting 2. If the input voltage setting is 12V: set the startup voltage to 12V and the shutdown voltage to 11V. 1. If the input voltage setting is 12V: set the startup voltage to 11.5V and the shutdown voltage to 10.5V. If the input voltage setting is 24V: set the startup voltage to 24V and the shutdown voltage to 22V. If the input voltage setting is 24V: set the startup voltage to 23V and the shutdown voltage to 21V. If the input voltage setting is 6V~36V, ignore the startup/shutdown setting. If the input voltage setting is 6V~36V, ignore the startup/shutdown setting. Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 98 VTC 6110 User Manual Appendix D: BIOS Setup 3. If the input voltage setting is 12V: set the startup voltage to 12.5V and the shutdown voltage to 11V. 4. If the input voltage setting is 12V: set the startup voltage to 12.5V and the shutdown voltage to 11.5V. If the input voltage setting is 24V: set the startup voltage to 25V and the shutdown voltage to 22V. If input voltage setting is 24V: set the startup voltage to 25V and the shutdown voltage to 23V. If the input voltage setting is 6V~36V, ignore the startup/shutdown setting. If the input voltage setting is 6V~36V ignore the startup/shutdown setting. Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 99 VTC 6110 User Manual Appendix D: BIOS Setup Power-on Delay Setting Enable Power-on Delay Delay time can be set at 10sec/30sec/1min./5min./10min./15min./30min./ 1hour. Disable Power-on Delay Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 100 VTC 6110 User Manual Appendix D: BIOS Setup Power-off Delay Setting Disable Power-off Delay Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 101 VTC 6110 User Manual Appendix D: BIOS Setup Enable Power-off Delay Delay time can be set at 20sec/1min./5min./10min./30min./1hour/6hour/ 18hour. Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 102 VTC 6110 User Manual For mobile devices without co-location condition ( the transmitting antenna is installed or located more than 20cm away from the body of user and near by person ) FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract Page Count : 47 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:d9bc3b6b-d4e5-41ba-85fa-6863b770277a Modify Date : 2010:08:17 09:42:56+08:00 Create Date : 2010:07:26 05:50:25+08:00 Metadata Date : 2010:08:17 09:42:56+08:00 Document ID : uuid:453d1f77-6be7-4409-8721-320a11716534 Format : application/pdf Tagged PDF : Yes Creator : Adobe InDesign CS3 (5.0) Producer : Adobe PDF Library 8.0EXIF Metadata provided by EXIF.tools