NEXCOM VTC6110X00 Intelligent Vehicle Telematics Computer User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	1350971
Application ID	Y3Fv7/Mb2bLi2pPXkncWCA==
Document Description	User manual2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	176.53kB (2206634 bits)
Date Submitted	2010-09-29 00:00:00
Date Available	2010-11-15 00:00:00
Creation Date	2010-07-26 05:48:18
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2010-07-26 05:48:40
Document Title	User manual2
Document Creator	Adobe InDesign CS3 (5.0)

Chapter 1: Product Introduction
LEDs
GPIO
I/O PORT Address :  #0EE0H Bit 0 :
0(Off) 1(On).
COMM
WLAN/HSDPA Status
SIM Card Socket
VTC 6110 can be internally integrated with a 3.5G Mini Card module. The
SIM card bracket is on the carrier board. When using the GPRS/UMTS/HSDPA function, insert the SIM card into the SIM card socket. Make sure to
turn off VTC 6110 before inserting the SIM card.
USB Port
The USB port complies with USB 2.0 specifications.
WiFi/Bluetooth Module Antenna Mounting Holes
The 3 external antenna mounting holes are used to mount and connect
WiFi antenna to a WLAN module (Mini Card type).
GPRS/UMTS/HSDPA Module Antenna Mounting Hole
The antenna mounting hole is used to mount and connect an antenna to
the GPRS/UMTS/HSDPA module.
Reset Button
Press this button to restart VTC 6110.
Line-out
Line-out is a stereo output for connecting external speakers.
Mic-in
Mic-in receives monophonic input from an external microphone.
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
VTC 6110 User Manual
Chapter 1: Product Introduction
Rear Panel
Power Input
GPS
COM2
COM3
DC Power Input Connector
Connector location
LVDS
COM1
Connector pin definition (CN1)
LAN
GPIO
DVI-D
USB
VGA
Pin No.
DC IN 6V-36V
5V/12V/SMBUS
MIC-IN
GND
VIN(6V~36V)
IGNITION
** Use power cable (+) with fuse for system protection
LINE-OUT
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
Function Description
VTC 6110 User Manual
Chapter 1: Product Introduction
RS232/485 Connector COM3
RS232 Connector COM1 and COM2
Connector size: DSUB-9 PIN
Connector location
The 9 pin D-Sub COM 3 port can be configured as RS232 or RS485 using
the SW6 dip switch.
Connector size: DSUB-9 PIN
Connector location
Connector pin definition
Connector pin definition
PIn
Definition
Pin
Definition
PIn
Definition
Pin
Definition
DCD
RXD
TXD
DTR
DCD (RS232)
TX-/RX- (RS485)
RXD (RS232)
TX+/RX+ (RS485)
GND
DSR
TXD (RS232)
DTR (RS232)
RTS
CTS
GND
DSR (RS232 )
RI
RTS (RS232)
CTS (RS232)
RI (RS232)
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
VTC 6110 User Manual
Chapter 1: Product Introduction
LVDS
Connector size: DB-26 PIN
Connector location
External SMBus, 12V and 5V Power Output
Connector location
Connector pin definition
PIn
Connector pin definition
Pin
Definition
Pin
Definition
Panel_ EN
Panel_control
VDD
VDD
LCDD09(OUT3)
LCDD01(OUT0)
LCDD08(OUT3#)
LCDD00(OUT0#)
LCDD_GND
10
LCDD_GND
11
LCDD07(CLK)
12
LCDD03(OUT1)
13
LCDD06(CLK#)
14
LCDD02(OUT1#)
15
LVDS_GND
16
LCDD_GND
17
LCDD05(OUT2)
18
Power on push button
19
LCDD04(OUT2#)
20
Panel_backlight
21
LCDD_GND
22
Panel-Gnd
23
USB_0#
24
Contact_DET#
25
USB_0
26
USB_VCC
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
Definition
Pin
Definition
5V
12V
SMBus Clock
GND
GND
SMBus Data
+5 VDC (1A) and +12VDC (1A) power output and SMBus
(w/o VTK 33M-01 connection)
+5 VDC (0.5A) and +12VDC (0.5A) power output and SMBus
(w/ VTK 33M-01 connection)
10
VTC 6110 User Manual
Chapter 1: Product Introduction
VGA Port
The DB15 VGA port supports resolutions up to 1600x1200 @ 85 Hz,
2048x1536 @ 60Hz.
USB Port x 2
The two USB ports are compliant with USB 2.0 specifications.
LAN Port
The LAN port is an RJ45 interface with integrated LEDs and supports
10/100/1000Mbps Ethernet data transfer rates.
Audio Jacks (MIC-IN and LINE-OUT)
• MIC-IN jack receives monophonic input from an external microphone.
• LINE-OUT jack is the stereo output for connecting external speakers.
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
11
VTC 6110 User Manual
Chapter 1: Product Introduction
Mechanical Dimensions
260.0
50.0
176.0
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
12
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Chapter 2: Jumpers and Connectors
This chapter describes how to set the jumpers on the motherboard. Note
that the following procedures are generic for all VTC 6110 series.
tronic components. Humid environment tend to have less static electricity than dry environments. A grounding strap is warranted whenever
danger of static electricity exists.
Before You Begin
Precautions
• Ensure you have a stable, clean working environment. Dust and dirt can
Computer components and electronic circuit boards can be damaged by
discharges of static electricity. Working on the computers that are still connected to a power supply can be extremely dangerous.
get into components and cause a malfunction. Use containers to keep
small components separated.
• Adequate lighting and proper tools can prevent you from accidentally
Follow the guidelines below to avoid damage to your computer or yourself:
damaging the internal components. Most of the procedures that follow
require only a few simple tools, including the following:
• Always disconnect the unit from the power outlet whenever you are
• A Philips screwdriver
working inside the case.
• A flat-tipped screwdriver
• If possible, wear a grounded wrist strap when you are working inside
• A set of jewelers Screwdrivers
the computer case. Alternatively, discharge any static electricity by
touching the bare metal chassis of the unit case, or the bare metal body
of any other grounded appliance.
• A grounding strap
• An anti-static pad
• Using your fingers can disconnect most of the connections. It is recom-
• Hold electronic circuit boards by the edges only. Do not touch the com����
mended that you do not use needle-nosed pliers to disconnect connections as these can damage the soft metal or plastic parts of the connectors.
ponents on the board unless it is necessary to do so. Don’t flex or stress
the circuit board.
• Leave all components inside the static-proof packaging that they
• Before working on internal components, make sure that the power
shipped with until they are ready for installation.
is off. Ground yourself before touching any internal components, by
touching a metal object. Static electricity can damage many of the elec-
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
• Use correct screws and do not over tighten screws.
13
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Jumper
A jumper is the simplest kind of electric switch. It consists of two metal
pins and a cap. When setting the jumpers, ensure that the jumper caps are
placed on the correct pins. When the jumper cap is placed on both pins,
the jumper is short. If you remove the jumper cap, or place the jumper
cap on just one pin, the jumper is open.
Refer to the illustrations below for examples of what the 2-pin and 3-pin
jumpers look like when they are short (on) and open (off).
Two-Pin Jumpers: Open (Left) and Short (Right)
Three-Pin Jumpers: Pins 1 and 2 Are Short
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
14
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Locations of the Jumpers and Connectors
VTCB6110
SW5 SW4 SW2
SW3
J9
LED1
LED2
USB1
SW1 J2
J11
J4
CN4
JP6
J3
Blue Tooth
JP5
10
J7
10
21
13
JP7
JP8
J14
29
JP4
15
16
JP2
BZ1
17
18
3.5G
CN16
JP3
J12
CN17
J1
CN14
J13
CN15
SW7
The figure on the right is the VTCB6110
carrier board which is the board used in
the VTC6110 system. It shows the locations of the jumpers and connectors.
51
52
12
JP1
24
CN6
17
18
51
52
J6
15
16
CN7
CN9
J10
SW6
10
10
10
30
29
CN11
CN3
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
USB2
LAN1
CON1
CN5
COM1
J5
CN2
CN12
J8
WLAN
CN1
CN8
15
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Jumper Settings
LVDS Power Input Voltage Select (JP9)
Pin
SW5: Input Voltage Selection
SW5 / Input
Voltage
12V (default)
24V
6V~36V
SW5.1
OFF
OFF
ON
SW5.2
OFF
ON
Ignore
RS232
(default)
RS485
SW6.1
OFF
ON
SW6.2
OFF
ON
SW6.3
OFF
ON
1-2
Short
+5V IN
2-3 (default)
Short (default)
+3.3V IN
Pin
Status
Function Description
1-2 (default)
Short (default)
VBAT IN
2-3
Short
Clear CMOS
BIOS Function Select (J1)
CF (IDE0) Primary Master/Slave Select (JP4)
Pin
Status
Function Description
1-2
Short
Disable carrier board BIOS
2-3 (default)
Short (default)
Disable module board BIOS
DC Input Voltage Select (JP1)
Pin
Status
Function Description
1-2
Short
Slave
2-3 (default)
Short (default)
Master
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
Function Description
CMOS Input Voltage Select (J6)
SW6: COM Port Mode Selection
SW6 COM Port Mode
Status
16
Pin
Status
Function Description
1-2 (default)
Short (default)
IGNITION
2-3
Short
VIN_M
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Temp Sensor (JP8)
GAL Download (JP5)
Pin
Function Description
Pin
Function Description
SENSOR+
+V3.3S
GND
GND
Auto Power Select (JP2)
TCK
TDO
Pin
Status
Function Description
TDI
1-2 (default)
Short (default)
AUTO
TMS
2-3
Short
BUTTON CONTROL
MCU COM Port (JP3)
PCI-104 VI/O Select Voltage (J13)
Pin
Function Description
TX
Pin
Status
Function Description
1-4(*)
Short*
+3.3V
RX
+5V
GND
3-6
Short
MCU Download (JP6)
Pin
Function Description
+V3.3ALW
C2D
MRST
C2CK
GND
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
17
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Connectors
Row A
Row B
Row A
Row B
A13
GBE0_MDI0+
B13
SMB_CK
A68
PCIE_TX0+
B68
PCIE_RX0+
A14
GBE0_CTREF
B14
SMB_DAT
A69
PCIE_TX0-
B69
PCIE_RX0-
A15
SUS_S3#
B15
SMB_ALERT#
A70
GND
B70
GND
A16
SATA0_TX+
B16
NC
A71
LVDS_A0+
B71
NC
A17
SATA0_TX-
B17
NC
A72
LVDS_A0-
B72
NC
A18
SUS_S4#
B18
SUS_STAT#
A73
LVDS_A1+
B73
NC
A19
SATA0_RX+
B19
NC
A74
LVDS_A1+
B74
NC
A20
SATA0_RX-
B20
NC
A75
LVDS_A2+
B75
NC
A21
GND
B21
GND
A76
LVDS_A2+
B76
NC
A22
NC
B22
NC
A77
LVDS_VDD_EN
B77
NC
A23
NC
B23
NC
A78
LVDS_A3+
B78
NC
A24
SUS_S5#
B24
PWR_OK
A79
LVDS_A3+
B79
LVDS_BKLT_EN
A25
NC
B25
NC
A80
GND
B80
GND
Row B
A26
NC
B26
NC
A81
LVDS_A_CK+
B81
NC
NC
A27
BATLOW#
B27
NC
A82
LVDS_A_CK-
B82
NC
A28
ATA_ACT#
B28
NC
A83
LVDS_I2C_CK
B83
LVDS_BKLT_
CTRL
A29
AC_SYNC
B29
NC
A84
LVDS_I2C_DAT
B84
VCC_5V_SBY
A30
AC_RST#
B30
AC_SDIN0
A85
NC
B85
VCC_5V_SBY
A31
GND
B31
GND
A86
NC
B86
VCC_5V_SBY
A32
AC_BITCLK
B32
SPKR
A87
NC
B87
VCC_5V_SBY
A33
AC_SDOUT
B33
I2C_CK
A88
PCIE0_CK_REF+
B88
RSVD
A34
NC
B34
I2C_DAT
A89
PCIE0_CK_REF-
B89
NC
A35
NC
B35
THRM#
A90
GND
B90
GND
A36
USB6-
B36
NC
A91
RSVD
B91
NC
A37
USB6+
B37
NC
A92
RSVD
B92
NC
A38
USB_6_7_OC#
B38
USB_4_5_OC#
A93
NC
B93
NC
A39
USB4-
B39
USB5-
A94
RSVD
B94
NC
High Speed Board-to-Board Connector:
COM Express Row A and Row B
J1
COM Express
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
B25
B26
B27
B28
B29
B30
B31
B32
B33
B34
B35
B36
B37
B38
B39
B40
B41
B42
B43
B44
B45
B46
B47
B48
B49
B50
B51
B52
B53
B54
B55
B56
B57
B58
B59
B60
B61
B62
B63
B64
B65
B66
B67
B68
B69
B70
B71
B72
B73
B74
B75
B76
B77
B78
B79
B80
B81
B82
B83
B84
B85
B86
B87
B88
B89
B90
B91
B92
B93
B94
B95
B96
B97
B98
B99
B100
B101
B102
B103
B104
B105
B106
B107
B108
B109
B110
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
B25
B26
B27
B28
B29
B30
B31
B32
B33
B34
B35
B36
B37
B38
B39
B40
B41
B42
B43
B44
B45
B46
B47
B48
B49
B50
B51
B52
B53
B54
B55
B56
B57
B58
B59
B60
B61
B62
B63
B64
B65
B66
B67
B68
B69
B70
B71
B72
B73
B74
B75
B76
B77
B78
B79
B80
B81
B82
B83
B84
B85
B86
B87
B88
B89
B90
B91
B92
B93
B94
B95
B96
B97
B98
B99
B100
B101
B102
B103
B104
B105
B106
B107
B108
B109
B110
Connector size: 2 x 110 = 220 pins
Connector location: J4
Row B
MH2
MH1
MH2
MH1
COM Express Connector
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A27
A28
A29
A30
A31
A32
A33
A34
A35
A36
A37
A38
A39
A40
A41
A42
A43
A44
A45
A46
A47
A48
A49
A50
A51
A52
A53
A54
A55
A56
A57
A58
A59
A60
A61
A62
A63
A64
A65
A66
A67
A68
A69
A70
A71
A72
A73
A74
A75
A76
A77
A78
A79
A80
A81
A82
A83
A84
A85
A86
A87
A88
A89
A90
A91
A92
A93
A94
A95
A96
A97
A98
A99
A100
A101
A102
A103
A104
A105
A106
A107
A108
A109
A110
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A27
A28
A29
A30
A31
A32
A33
A34
A35
A36
A37
A38
A39
A40
A41
A42
A43
A44
A45
A46
A47
A48
A49
A50
A51
A52
A53
A54
A55
A56
A57
A58
A59
A60
A61
A62
A63
A64
A65
A66
A67
A68
A69
A70
A71
A72
A73
A74
A75
A76
A77
A78
A79
A80
A81
A82
A83
A84
A85
A86
A87
A88
A89
A90
A91
A92
A93
A94
A95
A96
A97
A98
A99
A100
A101
A102
A103
A104
A105
A106
A107
A108
A109
A110
Row A
Connector Pin Definition
Row A
A1
GND
Row B
B1
GND
Row A
A56
NC
B56
A2
GBE0_MDI3-
B2
GBE0_ACT#
A57
GND
B57
NC
A3
GBE0_MDI3+
B3
LPC_FRAME#
A58
NC
B58
NC
A4
NC
B4
LPC_AD0
A59
NC
B59
NC
A5
NC
B5
LPC_AD1
A60
GND
B60
GND
A6
GBE0_MDI2-
B6
LPC_AD2
A61
NC
B61
NC
A7
GBE0_MDI2+
B7
LPC_AD3
A62
NC
B62
NC
A8
GBE0_LINK#
B8
NC
A63
GPI1
B63
GPO3
A9
GBE0_MDI1-
B9
NC
A64
NC
B64
NC
A10
GBE0_MDI1+
B10
LPC_CLK
A65
NC
B65
NC
A11
GND
B11
GND
A66
GND
B66
NC
A12
GBE0_MDI0-
B12
PWRBTN#
A67
NC
B67
NC
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
18
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Row A
Row B
Row A
Row B
A40
USB4+
B40
USB5+
A95
RSVD
B95
NC
A41
GND
B41
GND
A96
GND
B96
NC
A42
USB2-
B42
USB3-
A97
VCC_12V
B97
NC
A43
USB2+
B43
USB3+
A98
VCC_12V
B98
NC
A44
USB_2_3_OC#
B44
USB_0_1_OC#
A99
VCC_12V
B99
NC
A45
USB0-
B45
USB1-
A100
GND
B100
GND
A46
USB0+
B46
USB1+
A101
VCC_12V
B101
VCC_12V
A47
VCC_RTC
B47
NC
A102
VCC_12V
B102
VCC_12V
A48
NC
B48
NC
A103
VCC_12V
B103
VCC_12V
A49
NC
B49
SYS_RESET#
A104
VCC_12V
B104
VCC_12V
A50
NC
B50
CB_RESET#
A105
VCC_12V
B105
VCC_12V
A51
GND
B51
GND
A106
VCC_12V
B106
VCC_12V
A52
NC
B52
NC
A107
VCC_12V
B107
VCC_12V
A53
NC
B53
NC
A108
VCC_12V
B108
VCC_12V
A54
NC
B54
NC
A109
VCC_12V
B109
VCC_12V
A55
NC
B55
NC
A110
GND
B110
GND
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
19
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
High Speed Board-to-Board Connector:
COM Express Row C and Row D
Row C
J1
COM Express
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
B25
B26
B27
B28
B29
B30
B31
B32
B33
B34
B35
B36
B37
B38
B39
B40
B41
B42
B43
B44
B45
B46
B47
B48
B49
B50
B51
B52
B53
B54
B55
B56
B57
B58
B59
B60
B61
B62
B63
B64
B65
B66
B67
B68
B69
B70
B71
B72
B73
B74
B75
B76
B77
B78
B79
B80
B81
B82
B83
B84
B85
B86
B87
B88
B89
B90
B91
B92
B93
B94
B95
B96
B97
B98
B99
B100
B101
B102
B103
B104
B105
B106
B107
B108
B109
B110
B1
B2
B3
B4
B5
B6
B7
B8
B9
B10
B11
B12
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
B25
B26
B27
B28
B29
B30
B31
B32
B33
B34
B35
B36
B37
B38
B39
B40
B41
B42
B43
B44
B45
B46
B47
B48
B49
B50
B51
B52
B53
B54
B55
B56
B57
B58
B59
B60
B61
B62
B63
B64
B65
B66
B67
B68
B69
B70
B71
B72
B73
B74
B75
B76
B77
B78
B79
B80
B81
B82
B83
B84
B85
B86
B87
B88
B89
B90
B91
B92
B93
B94
B95
B96
B97
B98
B99
B100
B101
B102
B103
B104
B105
B106
B107
B108
B109
B110
Connector size: 2 X 110 = 220 Pins
Connector location: J3
Row D
MH2
MH1
MH2
MH1
COM Express Connector
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A27
A28
A29
A30
A31
A32
A33
A34
A35
A36
A37
A38
A39
A40
A41
A42
A43
A44
A45
A46
A47
A48
A49
A50
A51
A52
A53
A54
A55
A56
A57
A58
A59
A60
A61
A62
A63
A64
A65
A66
A67
A68
A69
A70
A71
A72
A73
A74
A75
A76
A77
A78
A79
A80
A81
A82
A83
A84
A85
A86
A87
A88
A89
A90
A91
A92
A93
A94
A95
A96
A97
A98
A99
A100
A101
A102
A103
A104
A105
A106
A107
A108
A109
A110
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A27
A28
A29
A30
A31
A32
A33
A34
A35
A36
A37
A38
A39
A40
A41
A42
A43
A44
A45
A46
A47
A48
A49
A50
A51
A52
A53
A54
A55
A56
A57
A58
A59
A60
A61
A62
A63
A64
A65
A66
A67
A68
A69
A70
A71
A72
A73
A74
A75
A76
A77
A78
A79
A80
A81
A82
A83
A84
A85
A86
A87
A88
A89
A90
A91
A92
A93
A94
A95
A96
A97
A98
A99
A100
A101
A102
A103
A104
A105
A106
A107
A108
A109
A110
Row C
Connector Pin Definition
Row C
Row D
Row C
Row D
C1
GND
D1
GND
C56
NC
D56
SDVOB_GREEN-
C2
IDE_D7
D2
IDE_D5
C57
NC
D57
NC
C3
IDE_D6
D3
IDE_D10
C58
NC
D58
SDVOB_BLUE+
C4
IDE_D3
D4
IDE_D11
C59
NC
D59
SDVOB_BLUE-
C5
IDE_D15
D5
IDE_D12
C60
GND
D60
GND
C6
IDE_D8
D6
IDE_D4
C61
NC
D61
SDVO_CLK+
C7
IDE_D9
D7
IDE_D0
C62
NC
D62
SDVO_CLK-
C8
IDE_D2
D8
IDE_REQ
C63
NC
D63
NC
C9
IDE_D13
D9
IDE_IOW#
C64
NC
D64
NC
C10
IDE_D1
D10
IDE_ACK#
C65
NC
D65
NC
C11
GND
D11
GND
C66
NC
D66
NC
C12
IDE_D14
D12
IDE_IRQ
C67
NC
D67
GND
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
20
Row D
Row C
Row D
C13
IDE_IORDY
D13
IDE_A0
C68
NC
D68
NC
C14
IDE_IOR#
D14
IDE_A1
C69
NC
D69
NC
C15
NC
D15
IDE_A2
C70
GND
D70
GND
C16
NC
D16
IDE_CS1#
C71
NC
D71
NC
C17
NC
D17
IDE_CS3#
C72
NC
D72
NC
C18
NC
D18
IDE_RESET#
C73
NC
D73
SDVO_CLK
C19
NC
D19
NC
C74
NC
D74
NC
C20
PCI_GNT0#
D20
NC
C75
NC
D75
NC
C21
GND
D21
GND
C76
GND
D76
GND
C22
PCI_REQ0#
D22
PCI_AD1
C77
NC
D77
IDE_CBLID#
C23
PCI_RESET#
D23
PCI_AD3
C78
NC
D78
NC
C24
PCI_AD0
D24
PCI_AD5
C79
NC
D79
NC
C25
PCI_AD2
D25
PCI_AD7
C80
GND
D80
GND
C26
PCI_AD4
D26
PCI_C/BE0#
C81
NC
D81
NC
C27
PCI_AD6
D27
PCI_AD9
C82
NC
D82
NC
C28
PCI_AD8
D28
PCI_AD11
C83
NC
D83
NC
C29
PCI_AD10
D29
PCI_AD13
C84
GND
D84
GND
C30
PCI_AD12
D30
PCI_AD15
C85
NC
D85
NC
C31
GND
D31
GND
C86
NC
D86
NC
C32
PCI_AD14
D32
PCI_PAR
C87
GND
D87
GND
C33
PCI_C/BE1#
D33
PCI_SERR#
C88
NC
D88
NC
C34
PCI_PERR#
D34
PCI_STOP#
C89
NC
D89
NC
C35
PCI_LOCK#
D35
PCI_TRDY#
C90
GND
D90
GND
C36
PCI_DEVSEL#
D36
PCI_FRAME#
C91
NC
D91
NC
C37
PCI_IRDY#
D37
PCI_AD16
C92
NC
D92
NC
C38
PCI_C/BE2#
D38
PCI_AD18
C93
GND
D93
GND
C39
PCI_AD17
D39
PCI_AD20
C94
NC
D94
NC
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Row C
Row D
Row C
Row D
C40
PCI_AD19
D40
PCI_AD22
C95
PEG_RX13-
D95
PEG_TX13-
C41
GND
D41
GND
C96
GND
D96
GND
C42
PCI_AD21
D42
PCI_AD24
C97
RSVD
D97
PEG_ENABLE#
C43
PCI_AD23
D43
PCI_AD26
C98
PEG_RX14+
D98
PEG_TX14+
C44
PCI_C/BE3#
D44
PCI_AD28
C99
PEG_RX14-
D99
PEG_TX14-
C45
PCI_AD25
D45
PCI_AD30
C100
GND
D100
GND
C46
PCI_AD27
D46
PCI_IRQC#
C101
PEG_RX15+
D101
PEG_TX15+
C47
PCI_AD29
D47
PCI_IRQD#
C102
PEG_RX15-
D102
PEG_TX15-
C48
PCI_AD31
D48
PCI_CLKRUN#
C103
GND
D103
GND
C49
PCI_IRQA#
D49
PCI_M66EN
C104
VCC_12V
D104
VCC_12V
C50
PCI_IRQB#
D50
PCI_CLK
C105
VCC_12V
D105
VCC_12V
C51
GND
D51
GND
C106
VCC_12V
D106
VCC_12V
C52
PEG_RX0+
D52
PEG_TX0+
C107
VCC_12V
D107
VCC_12V
C53
PEG_RX0-
D53
PEG_TX0-
C108
VCC_12V
D108
VCC_12V
C54
TYPE0#
D54
PEG_LANE_RV#
C109
VCC_12V
D109
VCC_12V
C55
PEG_RX1+
D55
PEG_TX1+
C110
GND
D110
GND
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
21
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
CompactFlash Connector
Pin
Connector size: 2 x 25 = 50 pins
Connector location: J12
23
Data 2
24
IOCS16# (NC)
25
CF_CD2# (Pull-down)
26
CF_CD1# (Pull-down)
27
Data 11
28
Data 12
29
Data 13
30
Data 14
31
Data 15
32
HDC CS300
33
CF_VS1# (NC)
34
IOR
35
IOW
36
CF_WE# (+5V)
37
Interrupt 15
38
+5V
39
CF_CSEL# (Master or Slave)
40
CF_VS2# (NC)
41
Reset #
42
IOCHRDY
43
DMA REQ / DACK (NC)
44
DMA ACK# /CF_REG# (+5V)
45
HDD Active Led
46
DMA66 Detect / CF_PDIAG#
47
Data 8
48
Data 9
49
Data 10
50
Gnd
50
49
26
Connector Pin Definition
Pin
Description
Pin
Description
Gnd
Data 3
Data 4
Data 5
Data 6
Data 7
HDC CS100
Gnd
Gnd
10
Gnd
11
Gnd
12
Gnd
13
+5V
14
Gnd
15
Gnd
16
Gnd
17
Gnd
18
Disk Address 2
19
Disk Address 1
20
Disk Address 0
21
Data 0
22
Data 1
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
22
Description
Pin
Description
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
GPIO Connector
RS232 Connector: COM1, COM2
Connector size: DSUB-9 pin
Connector location: COM1
Connector size: 2 x 10 = 20 Pins Pin Header, (2.0 mm Pitch)
Connector location: COM1 (CN9), COM2 (CN7)
CN10
BOX-2.0mm-M-180
Connector Pin Definition
Connector Pin Definition
Pin
Description
10
Pin
Description
Pin
Definition
Pin
Definition
GIN1
GIN2
DCD
RXD
GIN3
GIN4
TXD
DTR
GOUT4
GOUT1
Gnd
DSR
GOUT2
GOUT3
RTS
CTS
GND
RI
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
23
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
RS232/485 Connector: COM3
GAL Programmer PIN Header
Connector size: 2 x 10 = 20 Pins Pin Header, (2.0 mm Pitch)
Connector location: CN12
Connector size: 2.54mm-M-180
Connector location: JP5
CN10
10
JP5
BOX-2.0mm-M-180
PIN-2.54mm-M-180
Connector Pin Definition
Connector Pin Definition
Pin
Definition
Pin
DCD (RS232)
TX-/RX- (RS485)
Definition
RXD (RS232)
TX+/RX+ (RS485)
TXD (RS232)
DTR (RS232)
Gnd
DSR (RS232)
RTS (RS232)
CTS (RS232)
RI (RS232)
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
24
Pin
Definition
Pin
Definition
+3.3V
GND
TCK
TDO
TDI
TMS
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
MCU Programmer Pin Header
VGA Connector
Connector size: 2.54mm-M-180
Connector location: JP6
Connector size: DSUB-15
Connector location: CON1
JP6
PIN-2.54mm-M-180
Connector Pin Definition
Connector Pin Definition
Pin
Definition
Pin
Definition
Pin
Definition
Pin
Definition
+3.3ALW
C2D
BLUE
NC
C2CK
Gnd
Gnd
Gnd
Gnd
VCC
10
Gnd
11
NC
12
DDCDAT
13
Hsync
14
Vsync
15
DDCCLK
MRST
GND
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
25
RED
GREEN
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
LVDS Connector + USB0
Pin
Connector size: 2 x 15 (2.0mm)
Connector location: CN3
17
LVDS_5(OUT2)
18
Panel_backlight(+12V)
19
LVDS_4(OUT2#)
20
Panel_backlight(+12V)
21
LVDS_GND
22
Power on push buttom
23
USB_0#
24
Contact_DET#
25
USB_0
26
USB_VCC (+5V)
27
USB_GND
28
USB_GND
29
Panel_backlight(+12V)
30
GND
CN3
11
13
15
17
19
21
23
25
27
29
10
12
14
16
18
20
22
24
26
28
30
Definition
Pin
Definition
BOX-2.0mm-M-180
Connector Pin Definition
Pin
Definition
Pin
Definition
LVDS_CLK
LVDS_DAT
Panel_VDD
LVDS_1(OUT0)
LVDS_9(OUT3)
LVDS_0(OUT0#)
LVDS_8(OUT3#)
Panel_VDD
LVDS_GND
10
LVDS_GND
11
LVDS_7(CLK)
12
LVDS_3(OUT1)
13
LVDS_6(CLK#)
14
LVDS_2(OUT1#)
15
LVDS_GND
16
LVDS_GND
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
26
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
LAN Connector
USB Connector
Connector size: RJ-45
Connector location: LAN1
Connector location: USB1
Connector Pin Definition
Connector Pin Definition
Pin
Definition
Pin
Pin
Definition
TX+
TX-
RX+
N/C1
N/C2
RX-
N/C3
N/C4
LAN Speed LED
10
+3.3V
11
LAN Link LED
12
+3.3V
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
27
Definition
Pin
Definition
VCC
DATA-
DATA+
GND
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
USB Connector
LVDS Power Connector
Connector location: USB2
Connector location: J5
Connector Pin Definition
Connector Pin Definition
Pin
Pin
Definition
Definition
VCC
DATA1-
DATA1+
GND
VCC
DATA-
DATA+
GND
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
28
Pin
Definition
Pin
Definition
Panel_backlight
Panel_VDD
GND
GND
LVDS_PANEL
LVDS_BIASON
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
External 12V & 5V Power and SMBUS Connector
Mic-in
Connector location: CN2
Connector location: CN11 and CN15
Connector Pin Definition
Connector Pin Definition
Pin
Definition
Pin
5V
12V
SMBCLK
GND
GND
SMBDATA
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
Pin
Definition
29
Definition
Pin
Definition
NC
MIC_JD
NC
MIC_OUT
GND
GND
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Line-out
PCI-104 VI/O Voltage Setting
Connector location: CN8 and CN14
Connector location: J13
Connector Pin Definition
Pin
Definition
Pin
LINE_OUT_L
SURR_JD
NC
LINE_OUT_R
GND
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
Definition
Connector Pin Definition
GND
30
Pin No.
Status
1-3, 2-4 (default)
Short
Function Description
+3.3V
3-5, 4-6
Short
+5V
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
PCI-104 Connector
Power Button
Connector location: CN16
Connector location: SW1
Connector Pin Definition
Reset Button
Connector location: SW2
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
31
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
MCU COM Port
ACC_ON LED
Connector location: JP3
Connector location: JP7
Connector Pin Definition
Pin
Function Description
TX
RX
Pin
Function Description
GND
+3.3V LED
GND
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
Connector Pin Definition
32
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Temp Sensor
DC Power Input Connector
Connector location: JP8
Connector location: CN1
Connector Pin Definition
Pin
Function Description
SENSOR+
GND
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
Connector Pin Definition
Pin
33
Function Description
GND
VIN (6V~36V)
IGNITION
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Power On and IDE Active LED
GPIO and UMTS LEDs
Connector location: LED1
Connector location: LED2
T1
T2
B1
B2
LED I/O Port Address and Data
Connector Pin Definition
LED
Function Description
LED
Function Description
T1
POWER LED
T2
I/O PORT Address: 0EE0; Bit0: 1 (Light), 0 (Dark)
B1
HD LED
B2
UMTS STATUS
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
34
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Serial ATA
Serial ATA Power Input
Connector location: CN6
Connector location: J10
Connector Pin Definition
Connector Pin Definition
Pin
Definition
Pin
Definition
Pin
Definition
GND
SATA_TXP0 -
+V12S
GND
SATA_TXN0
GND
GND
+V5S
SATA_RXN0
SATA_RXP0
GND
Pin
Definition
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
35
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Mini-PCIe Socket (for 3.5G module)
PCIe Interface
Mini-PCIe Socket (for WLAN module)
USB + PCIe Interface
Connector location: CN10
Connector location: CN13
52
52
51
51
Connector Pin Definition
Pin
Definition
Pin
Connector Pin Definition
Definition
Pin
Definition
Pin
Definition
Definition
Pin
Definition
Pin
Definition
MIC +
+V3.3S
27
GND
28
NC
WAKE#
+V3.3S
27
GND
28
+V1.5S
MIC -
GND
29
GND
30
NC
NC
GND
29
GND
30
SMB_CLK
SPK +
NC
31
NC
32
NC
NC
+V1.5S
31
PETn0
32
SMB_DATA
GND
USIM PWR
33
RESET
34
GND
CLKREQ#
NC
33
PETp0
34
GND
GND
10
USIM DATa
35
GND
36
USB_D-
GND
10
NC
35
GND
36
USB_D-
11
VCC_
MSM26_
DIG
12
USIM CLK
37
GND
38
USB_D+
11
REFCLK-
12
NC
37
NC
38
USB_D+
13
REFCLK+
14
NC
39
NC
40
GND
13
NC
14
USIM RST
39
+V3.3S
40
GND
15
GND
16
NC
41
NC
42
15
GND
16
NC
41
+V3.3S
42
LED_
WWAN#
LED_
WWAN#
17
NC
18
GND
43
NC
44
17
NC
18
GND
43
GND
44
NC
LED_
WLAN#
19
NC
20
W_DISABLE#
45
NC
46
NC
19
NC
20
DISABLE#
45
NC
46
LED_
WPAN#
21
GND
22
NC
47
NC
48
NC
21
GND
22
PERST#
47
NC
48
+V1.5S
23
NC
24
NC
49
NC
50
GND
23
PERn0
24
+3.3S
49
NC
50
GND
25
NC
26
GND
51
NC
52
+V3.3S
25
PERp0
26
GND
51
NC
52
+V3.3S
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
Pin
36
Definition
Pin
VTC 6110 User Manual
Chapter 2: Jumpers and Connectors
Bluetooth Connector
Connector location: CN4
Connector location: J7
MH2
MH1
SIM Card Connector
10
J7
JST-1mm-M-90
Pin
Connector Pin Definition
Pin
Definition
Pin
Definition
Pin
Definition
GND
USB_6P_L
Definition
USB_6N_L
NC
NC
BT_AUDIO_EN_R
C1
POWER VOLTAGE
C2
RESET SIGNAL
C3
CLOCK SIGNAL
C5
GND
NC
BT_3.3V
I/O
NC
10
GND
C6
VPP:PROGRAM VOLTAGE
SW
Contact present switch
C7
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
37
VTC 6110 User Manual
Chapter 3: System Setup
Chapter 3: System Setup
Removing the Chassis Cover
Prior to removing the chassis cover, make sure the unit’s power is
off and disconnected from the power sources to prevent electric
shock or system damage.
1. The screws on the cover are used to secure the cover to the chassis.
Remove these screws and put them in a safe place for later use.
Bottom View
2. Lift the cover upward then remove it from the chassis.
Front View
Rear View
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
38
VTC 6110 User Manual
Chapter 3: System Setup
Installing a GPRS/UMTS/HSDPA Module
2. Insert the module into the Mini PCI Express slot at a 45 degrees angle
until the gold-plated connector on the edge of the module completely
disappears inside the slot.
1. The Mini PCI Express slot shown below is used to install a 3.5G communication module such as GPRS, UMTS or HSDPA module.
GPRS/UMTS/
HSDPA module
Mini PCI
Express slot
Mini PCI
Express slot
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
39
VTC 6110 User Manual
Chapter 3: System Setup
3. Push the module down then secure it with mounting screws.
4. Attach one end of the RF cable onto the module.
Attach RF cable
to the module
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
40
VTC 6110 User Manual
Chapter 3: System Setup
5. The photo below shows one end of the RF cable properly attached
onto the module.
6. Mount the other end of the cable to the antenna mounting hole located at the front panel of the chassis.
RF cable mounted
at the front panel
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
41
VTC 6110 User Manual
Chapter 3: System Setup
Installing a Wireless LAN Module
2. Insert the wireless LAN module into the Mini PCI Express slot at a 45
degrees angle until the gold-plated connector on the edge of the module completely disappears inside the slot.
1. The Mini PCI Express slot shown below is used to install a wireless LAN
module.
Wireless LAN
module
Mini PCI
Express slot
Mini PCI
Express slot
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
42
VTC 6110 User Manual
Chapter 3: System Setup
3. Push the module down then secure it with mounting screws.
4. Attach one end of the RF cable onto the module.
Attach RF
cable to the
module
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
43
VTC 6110 User Manual
Chapter 3: System Setup
5. The photo below shows one end of the RF cable properly attached
onto the module.
6. Mount the other end of the cable to the antenna mounting hole located at the front panel of the chassis.
RF cable mounted
at the front panel
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
44
VTC 6110 User Manual
Chapter 3: System Setup
Installing a Bluetooth Module
2. Install the provided mounting stud as shown in the illustration below.
1. The USB header shown below is used to install a Bluetooth module.
Mounting
stud
USB
header
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
45
VTC 6110 User Manual
Chapter 3: System Setup
3. Insert the Bluetooth module’s cable connector into the USB header.
4. Attach one end of the RF cable onto the module.
Push the module down then secure it with a mounting screw.
Attach RF
cable to the
module
Mounting
screw
5. Mount the other end of the cable to the Bluetooth mounting hole
located at the front panel of the chassis.
Bluetooth module
Cable connector
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
46
VTC 6110 User Manual

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 40
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6e43587f-2d7f-4c29-9dd3-a8cab4e9e91c
Modify Date                     : 2010:07:26 05:48:40+08:00
Create Date                     : 2010:07:26 05:48:18+08:00
Metadata Date                   : 2010:07:26 05:48:40+08:00
Document ID                     : uuid:e65f08dd-38fd-4cb1-b138-b9b121fd05c9
Format                          : application/pdf
Tagged PDF                      : Yes
Creator                         : Adobe InDesign CS3 (5.0)
Producer                        : Adobe PDF Library 8.0

EXIF Metadata provided by EXIF.tools