NEXCOM VTC6110X00 Intelligent Vehicle Telematics Computer User Manual 2
NEXCOM international Co.,LTD Intelligent Vehicle Telematics Computer 2
NEXCOM >
Contents
- 1. User manual1
- 2. User manual2
- 3. User manual3
- 4. User manual4
- 5. User Manual4
User manual2
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 7VTC 6110 User ManualChapter 1: Product IntroductionLEDsGPIO I/O PORT Address : <Read/Write> #0EE0H Bit 0 : 0(Off) 1(On). COMM WLAN/HSDPA StatusSIM Card SocketVTC 6110 can be internally integrated with a 3.5G Mini Card module. The SIM card bracket is on the carrier board. When using the GPRS/UMTS/HS-DPA function, insert the SIM card into the SIM card socket. Make sure to turn off VTC 6110 before inserting the SIM card.USB PortThe USB port complies with USB 2.0 specifications.WiFi/Bluetooth Module Antenna Mounting HolesThe 3 external antenna mounting holes are used to mount and connect WiFi antenna to a WLAN module (Mini Card type).GPRS/UMTS/HSDPA Module Antenna Mounting HoleThe antenna mounting hole is used to mount and connect an antenna to the GPRS/UMTS/HSDPA module.Reset ButtonPress this button to restart VTC 6110.Line-outLine-out is a stereo output for connecting external speakers.Mic-inMic-in receives monophonic input from an external microphone.](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-1.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 8VTC 6110 User ManualChapter 1: Product IntroductionRear Panel** Use power cable (+) with fuse for system protectionPower InputDC Power Input ConnectorConnector location 3 2 1Connector pin definition (CN1)Pin No. Function Description1 GND2 VIN(6V~36V)3 IGNITIONVGACOM1COM2COM3GPSLANUSBMIC-INLINE-OUTDVI-D GPIO5V/12V/SMBUSDC IN 6V-36VLVDS](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-2.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 9VTC 6110 User ManualChapter 1: Product IntroductionRS232/485 Connector COM3The 9 pin D-Sub COM 3 port can be configured as RS232 or RS485 using the SW6 dip switch.Connector size: DSUB-9 PINConnector locationConnector pin definitionPIn Definition Pin Definition1 DCD (RS232)TX-/RX- (RS485) 2 RXD (RS232)TX+/RX+ (RS485)3 TXD (RS232) 4 DTR (RS232)5 GND 6 DSR (RS232 )7 RTS (RS232) 8 CTS (RS232)9 RI (RS232)RS232 Connector COM1 and COM2Connector size: DSUB-9 PINConnector locationConnector pin definitionPIn Definition Pin Definition1 DCD 2 RXD3 TXD 4 DTR5 GND 6 DSR7 RTS 8 CTS9 RI1 56 91 56 9](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-3.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 10 VTC 6110 User ManualChapter 1: Product IntroductionLVDSConnector size: DB-26 PINConnector locationConnector pin definitionPin Definition Pin Definition1 Panel_ EN 2 Panel_control3 VDD 4 VDD5 LCDD09(OUT3) 6 LCDD01(OUT0)7 LCDD08(OUT3#) 8 LCDD00(OUT0#)9 LCDD_GND 10 LCDD_GND11 LCDD07(CLK) 12 LCDD03(OUT1)13 LCDD06(CLK#) 14 LCDD02(OUT1#)15 LVDS_GND 16 LCDD_GND17 LCDD05(OUT2) 18 Power on push button19 LCDD04(OUT2#) 20 Panel_backlight21 LCDD_GND 22 Panel-Gnd23 USB_0# 24 Contact_DET#25 USB_0 26 USB_VCCExternal SMBus, 12V and 5V Power OutputConnector location6 43 1Connector pin definitionPIn Definition Pin Definition1 5V 2 12V3 SMBus Clock 4 GND5 GND 6 SMBus Data+5 VDC (1A) and +12VDC (1A) power output and SMBus(w/o VTK 33M-01 connection)+5 VDC (0.5A) and +12VDC (0.5A) power output and SMBus(w/ VTK 33M-01 connection)](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-4.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 11 VTC 6110 User ManualChapter 1: Product IntroductionVGA PortThe DB15 VGA port supports resolutions up to 1600x1200 @ 85 Hz, 2048x1536 @ 60Hz.USB Port x 2The two USB ports are compliant with USB 2.0 specifications.LAN PortThe LAN port is an RJ45 interface with integrated LEDs and supports 10/100/1000Mbps Ethernet data transfer rates.Audio Jacks (MIC-IN and LINE-OUT)MIC-IN jack receives monophonic input from an external microphone. •LINE-OUT jack is the stereo output for connecting external speakers.•](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-5.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 12 VTC 6110 User ManualChapter 1: Product IntroductionMechanical Dimensions260.050.0176.0](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-6.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 13Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualCh a p t e r 2: Ju m p e r s a n d Co n n e C t o r sThis chapter describes how to set the jumpers on the motherboard. Note that the following procedures are generic for all VTC 6110 series.Before You Begin Ensure you have a stable, clean working environment. Dust and dirt can •get into components and cause a malfunction. Use containers to keep small components separated. Adequate lighting and proper tools can prevent you from accidentally •damaging the internal components. Most of the procedures that follow require only a few simple tools, including the following:A Philips screwdriver •A flat-tipped screwdriver •A set of jewelers Screwdrivers •A grounding strap •An anti-static pad •Using your fingers can disconnect most of the connections. It is recom-•mended that you do not use needle-nosed pliers to disconnect connec-tions as these can damage the soft metal or plastic parts of the connec-tors. Before working on internal components, make sure that the power •is off. Ground yourself before touching any internal components, by touching a metal object. Static electricity can damage many of the elec-tronic components. Humid environment tend to have less static electric-ity than dry environments. A grounding strap is warranted whenever danger of static electricity exists. Precautions Computer components and electronic circuit boards can be damaged by discharges of static electricity. Working on the computers that are still con-nected to a power supply can be extremely dangerous. Follow the guidelines below to avoid damage to your computer or your-self: Always disconnect the unit from the power outlet whenever you are •working inside the case. If possible, wear a grounded wrist strap when you are working inside •the computer case. Alternatively, discharge any static electricity by touching the bare metal chassis of the unit case, or the bare metal body of any other grounded appliance. Hold electronic circuit boards by the edges only. Do not touch the com-com-•ponents on the board unless it is necessary to do so. Don’t flex or stress the circuit board. Leave all components inside the static-proof packaging that they •shipped with until they are ready for installation. Use correct screws and do not over tighten screws.•](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-7.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 14Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualJumperA jumper is the simplest kind of electric switch. It consists of two metal pins and a cap. When setting the jumpers, ensure that the jumper caps are placed on the correct pins. When the jumper cap is placed on both pins, the jumper is short. If you remove the jumper cap, or place the jumper cap on just one pin, the jumper is open. Refer to the illustrations below for examples of what the 2-pin and 3-pin jumpers look like when they are short (on) and open (off).Two-Pin Jumpers: Open (Left) and Short (Right)Three-Pin Jumpers: Pins 1 and 2 Are Short](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-8.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 15Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualLocations of the Jumpers and ConnectorsVTCB6110The figure on the right is the VTCB6110 carrier board which is the board used in the VTC6110 system. It shows the loca-tions of the jumpers and connectors. CN4CN1710 1J14CN11CN216J5COM1302921CN3CON1J861CN51 4J10SW61 7CN612910CN71910CN912910CN12USB2LAN11151751216185211517512161852CN161J12CN84CN111CN1426CN1552162921135BZ1241261JP551JP621JP821JP7J71013131J631JP431JP331JP231JP131J1SW1J3J4LED1LED2USB1SW7SW2SW3SW4SW51J111J21J941Blue ToothWLAN3.5GJ13](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-9.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 16Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualJumper SettingsSW5 / Input Voltage12V (default) 24V 6V~36VSW5.1 OFF OFF ONSW5.2 OFF ON IgnoreSW5: Input Voltage SelectionSW6: COM Port Mode SelectionSW6 COM Port Mode RS232 (default)RS485SW6.1 OFF ONSW6.2 OFF ONSW6.3 OFF ONCF (IDE0) Primary Master/Slave Select (JP4)Pin Status Function Description1-2 Short Slave2-3 (default) Short (default) MasterLVDS Power Input Voltage Select (JP9)Pin Status Function Description1-2 Short +5V IN2-3 (default) Short (default) +3.3V INCMOS Input Voltage Select (J6)Pin Status Function Description1-2 (default) Short (default) VBAT IN2-3 Short Clear CMOSBIOS Function Select (J1)Pin Status Function Description1-2 Short Disable carrier board BIOS2-3 (default) Short (default) Disable module board BIOSDC Input Voltage Select (JP1)Pin Status Function Description1-2 (default) Short (default) IGNITION2-3 Short VIN_M](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-10.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 17Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualTemp Sensor (JP8)Pin Function Description1 SENSOR+2 GNDAuto Power Select (JP2)Pin Status Function Description1-2 (default) Short (default) AUTO2-3 Short BUTTON CONTROLPCI-104 VI/O Select Voltage (J13)Pin Status Function Description1-4(*) Short* +3.3V3-6 Short +5VMCU Download (JP6)Pin Function Description1 +V3.3ALW2 C2D3 MRST4 C2CK5 GNDGAL Download (JP5)Pin Function Description1 +V3.3S2 GND3 TCK4 TDO5 TDI6 TMSMCU COM Port (JP3)Pin Function Description1 TX2 RX3 GND](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-11.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 18Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualConnectorsHigh Speed Board-to-Board Connector: COM Express Row A and Row BConnector size: 2 x 110 = 220 pinsConnector location: J4COM Express ConnectorJ1COM Express A1A1A2A2A3A3A4A4A5A5A6A6A7A7A8A8A9A9A10A10A11A11A12A12A13A13A14A14A15A15A16A16A17A17A18A18A19A19A20A20A21A21A22A22A23A23A24A24A25A25A26A26A27A27A28A28A29A29A30A30A31A31A32A32A33A33A34A34A35A35A36A36A37A37A38A38A39A39A40A40A41A41A42A42A43A43A44A44A45A45A46A46A47A47A48A48A49A49A50A50A51A51A52A52A53A53A54A54A55A55A56A56A57A57A58A58A59A59A60A60A61A61A62A62A63A63A64A64A65A65A66A66A67A67A68A68A69A69A70A70A71A71A72A72A73A73A74A74A75A75A76A76A77A77A78A78A79A79A80A80A81A81A82A82A83A83A84A84A85A85A86A86A87A87A88A88A89A89A90A90A91A91A92A92A93A93A94A94A95A95A96A96A97A97A98A98A99A99A100A100A101A101A102A102A103A103A104A104A105A105A106A106A107A107A108A108A109A109A110A110B1 B1B2 B2B3 B3B4 B4B5 B5B6 B6B7 B7B8 B8B9 B9B10 B10B11 B11B12 B12B13 B13B14 B14B15 B15B16 B16B17 B17B18 B18B19 B19B20 B20B21 B21B22 B22B23 B23B24 B24B25 B25B26 B26B27 B27B28 B28B29 B29B30 B30B31 B31B32 B32B33 B33B34 B34B35 B35B36 B36B37 B37B38 B38B39 B39B40 B40B41 B41B42 B42B43 B43B44 B44B45 B45B46 B46B47 B47B48 B48B49 B49B50 B50B51 B51B52 B52B53 B53B54 B54B55 B55B56 B56B57 B57B58 B58B59 B59B60 B60B61 B61B62 B62B63 B63B64 B64B65 B65B66 B66B67 B67B68 B68B69 B69B70 B70B71 B71B72 B72B73 B73B74 B74B75 B75B76 B76B77 B77B78 B78B79 B79B80 B80B81 B81B82 B82B83 B83B84 B84B85 B85B86 B86B87 B87B88 B88B89 B89B90 B90B91 B91B92 B92B93 B93B94 B94B95 B95B96 B96B97 B97B98 B98B99 B99B100 B100B101 B101B102 B102B103 B103B104 B104B105 B105B106 B106B107 B107B108 B108B109 B109B110 B110MH1 MH1MH2 MH2Connector Pin DefinitionRow A Row B Row A Row BA1 GND B1 GND A56 NC B56 NCA2 GBE0_MDI3- B2 GBE0_ACT# A57 GND B57 NCA3 GBE0_MDI3+ B3 LPC_FRAME# A58 NC B58 NCA4 NC B4 LPC_AD0 A59 NC B59 NCA5 NC B5 LPC_AD1 A60 GND B60 GND A6 GBE0_MDI2- B6 LPC_AD2 A61 NC B61 NCA7 GBE0_MDI2+ B7 LPC_AD3 A62 NC B62 NCA8 GBE0_LINK# B8 NC A63 GPI1 B63 GPO3A9 GBE0_MDI1- B9 NC A64 NC B64 NCA10 GBE0_MDI1+ B10 LPC_CLK A65 NC B65 NCA11 GND B11 GND A66 GND B66 NCA12 GBE0_MDI0- B12 PWRBTN# A67 NC B67 NCRow A Row B Row A Row BA13 GBE0_MDI0+ B13 SMB_CK A68 PCIE_TX0+ B68 PCIE_RX0+A14 GBE0_CTREF B14 SMB_DAT A69 PCIE_TX0- B69 PCIE_RX0-A15 SUS_S3# B15 SMB_ALERT# A70 GND B70 GND A16 SATA0_TX+ B16 NC A71 LVDS_A0+ B71 NCA17 SATA0_TX- B17 NC A72 LVDS_A0- B72 NCA18 SUS_S4# B18 SUS_STAT# A73 LVDS_A1+ B73 NCA19 SATA0_RX+ B19 NC A74 LVDS_A1+ B74 NCA20 SATA0_RX- B20 NC A75 LVDS_A2+ B75 NCA21 GND B21 GND A76 LVDS_A2+ B76 NCA22 NC B22 NC A77 LVDS_VDD_EN B77 NCA23 NC B23 NC A78 LVDS_A3+ B78 NCA24 SUS_S5# B24 PWR_OK A79 LVDS_A3+ B79 LVDS_BKLT_ENA25 NC B25 NC A80 GND B80 GND A26 NC B26 NC A81 LVDS_A_CK+ B81 NCA27 BATLOW# B27 NC A82 LVDS_A_CK- B82 NCA28 ATA_ACT# B28 NC A83 LVDS_I2C_CK B83 LVDS_BKLT_CTRLA29 AC_SYNC B29 NC A84 LVDS_I2C_DAT B84 VCC_5V_SBYA30 AC_RST# B30 AC_SDIN0 A85 NC B85 VCC_5V_SBY A31 GND B31 GND A86 NC B86 VCC_5V_SBY A32 AC_BITCLK B32 SPKR A87 NC B87 VCC_5V_SBYA33 AC_SDOUT B33 I2C_CK A88 PCIE0_CK_REF+ B88 RSVD A34 NC B34 I2C_DAT A89 PCIE0_CK_REF- B89 NC A35 NC B35 THRM# A90 GND B90 GND A36 USB6- B36 NC A91 RSVD B91 NC A37 USB6+ B37 NC A92 RSVD B92 NC A38 USB_6_7_OC# B38 USB_4_5_OC# A93 NC B93 NC A39 USB4- B39 USB5- A94 RSVD B94 NC Row BRow A](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-12.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 19Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualRow A Row B Row A Row BA40 USB4+ B40 USB5+ A95 RSVD B95 NC A41 GND B41 GND A96 GND B96 NC A42 USB2- B42 USB3- A97 VCC_12V B97 NCA43 USB2+ B43 USB3+ A98 VCC_12V B98 NCA44 USB_2_3_OC# B44 USB_0_1_OC# A99 VCC_12V B99 NCA45 USB0- B45 USB1- A100 GND B100 GND A46 USB0+ B46 USB1+ A101 VCC_12V B101 VCC_12VA47 VCC_RTC B47 NC A102 VCC_12V B102 VCC_12VA48 NC B48 NC A103 VCC_12V B103 VCC_12VA49 NC B49 SYS_RESET# A104 VCC_12V B104 VCC_12VA50 NC B50 CB_RESET# A105 VCC_12V B105 VCC_12VA51 GND B51 GND A106 VCC_12V B106 VCC_12VA52 NC B52 NC A107 VCC_12V B107 VCC_12VA53 NC B53 NC A108 VCC_12V B108 VCC_12VA54 NC B54 NC A109 VCC_12V B109 VCC_12VA55 NC B55 NC A110 GND B110 GND](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-13.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 20Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualHigh Speed Board-to-Board Connector: COM Express Row C and Row DConnector size: 2 X 110 = 220 PinsConnector location: J3COM Express ConnectorJ1COM Express A1A1A2A2A3A3A4A4A5A5A6A6A7A7A8A8A9A9A10A10A11A11A12A12A13A13A14A14A15A15A16A16A17A17A18A18A19A19A20A20A21A21A22A22A23A23A24A24A25A25A26A26A27A27A28A28A29A29A30A30A31A31A32A32A33A33A34A34A35A35A36A36A37A37A38A38A39A39A40A40A41A41A42A42A43A43A44A44A45A45A46A46A47A47A48A48A49A49A50A50A51A51A52A52A53A53A54A54A55A55A56A56A57A57A58A58A59A59A60A60A61A61A62A62A63A63A64A64A65A65A66A66A67A67A68A68A69A69A70A70A71A71A72A72A73A73A74A74A75A75A76A76A77A77A78A78A79A79A80A80A81A81A82A82A83A83A84A84A85A85A86A86A87A87A88A88A89A89A90A90A91A91A92A92A93A93A94A94A95A95A96A96A97A97A98A98A99A99A100A100A101A101A102A102A103A103A104A104A105A105A106A106A107A107A108A108A109A109A110A110B1 B1B2 B2B3 B3B4 B4B5 B5B6 B6B7 B7B8 B8B9 B9B10 B10B11 B11B12 B12B13 B13B14 B14B15 B15B16 B16B17 B17B18 B18B19 B19B20 B20B21 B21B22 B22B23 B23B24 B24B25 B25B26 B26B27 B27B28 B28B29 B29B30 B30B31 B31B32 B32B33 B33B34 B34B35 B35B36 B36B37 B37B38 B38B39 B39B40 B40B41 B41B42 B42B43 B43B44 B44B45 B45B46 B46B47 B47B48 B48B49 B49B50 B50B51 B51B52 B52B53 B53B54 B54B55 B55B56 B56B57 B57B58 B58B59 B59B60 B60B61 B61B62 B62B63 B63B64 B64B65 B65B66 B66B67 B67B68 B68B69 B69B70 B70B71 B71B72 B72B73 B73B74 B74B75 B75B76 B76B77 B77B78 B78B79 B79B80 B80B81 B81B82 B82B83 B83B84 B84B85 B85B86 B86B87 B87B88 B88B89 B89B90 B90B91 B91B92 B92B93 B93B94 B94B95 B95B96 B96B97 B97B98 B98B99 B99B100 B100B101 B101B102 B102B103 B103B104 B104B105 B105B106 B106B107 B107B108 B108B109 B109B110 B110MH1 MH1MH2 MH2Row DRow CConnector Pin DefinitionRow C Row D Row C Row DC1 GND D1 GND C56 NC D56 SDVOB_GREEN-C2 IDE_D7 D2 IDE_D5 C57 NC D57 NCC3 IDE_D6 D3 IDE_D10 C58 NC D58 SDVOB_BLUE+C4 IDE_D3 D4 IDE_D11 C59 NC D59 SDVOB_BLUE-C5 IDE_D15 D5 IDE_D12 C60 GND D60 GND C6 IDE_D8 D6 IDE_D4 C61 NC D61 SDVO_CLK+C7 IDE_D9 D7 IDE_D0 C62 NC D62 SDVO_CLK-C8 IDE_D2 D8 IDE_REQ C63 NC D63 NCC9 IDE_D13 D9 IDE_IOW# C64 NC D64 NCC10 IDE_D1 D10 IDE_ACK# C65 NC D65 NCC11 GND D11 GND C66 NC D66 NCC12 IDE_D14 D12 IDE_IRQ C67 NC D67 GNDRow C Row D Row C Row DC13 IDE_IORDY D13 IDE_A0 C68 NC D68 NCC14 IDE_IOR# D14 IDE_A1 C69 NC D69 NCC15 NC D15 IDE_A2 C70 GND D70 GND C16 NC D16 IDE_CS1# C71 NC D71 NCC17 NC D17 IDE_CS3# C72 NC D72 NCC18 NC D18 IDE_RESET# C73 NC D73 SDVO_CLKC19 NC D19 NC C74 NC D74 NCC20 PCI_GNT0# D20 NC C75 NC D75 NCC21 GND D21 GND C76 GND D76 GNDC22 PCI_REQ0# D22 PCI_AD1 C77 NC D77 IDE_CBLID#C23 PCI_RESET# D23 PCI_AD3 C78 NC D78 NCC24 PCI_AD0 D24 PCI_AD5 C79 NC D79 NCC25 PCI_AD2 D25 PCI_AD7 C80 GND D80 GND C26 PCI_AD4 D26 PCI_C/BE0# C81 NC D81 NCC27 PCI_AD6 D27 PCI_AD9 C82 NC D82 NCC28 PCI_AD8 D28 PCI_AD11 C83 NC D83 NCC29 PCI_AD10 D29 PCI_AD13 C84 GND D84 GNDC30 PCI_AD12 D30 PCI_AD15 C85 NC D85 NC C31 GND D31 GND C86 NC D86 NC C32 PCI_AD14 D32 PCI_PAR C87 GND D87 GND C33 PCI_C/BE1# D33 PCI_SERR# C88 NC D88 NC C34 PCI_PERR# D34 PCI_STOP# C89 NC D89 NCC35 PCI_LOCK# D35 PCI_TRDY# C90 GND D90 GND C36 PCI_DEVSEL# D36 PCI_FRAME# C91 NC D91 NCC37 PCI_IRDY# D37 PCI_AD16 C92 NC D92 NCC38 PCI_C/BE2# D38 PCI_AD18 C93 GND D93 GND C39 PCI_AD17 D39 PCI_AD20 C94 NC D94 NC](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-14.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 21Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualRow C Row D Row C Row DC40 PCI_AD19 D40 PCI_AD22 C95 PEG_RX13- D95 PEG_TX13- C41 GND D41 GND C96 GND D96 GNDC42 PCI_AD21 D42 PCI_AD24 C97 RSVD D97 PEG_ENABLE# C43 PCI_AD23 D43 PCI_AD26 C98 PEG_RX14+ D98 PEG_TX14+ C44 PCI_C/BE3# D44 PCI_AD28 C99 PEG_RX14- D99 PEG_TX14- C45 PCI_AD25 D45 PCI_AD30 C100 GND D100 GND C46 PCI_AD27 D46 PCI_IRQC# C101 PEG_RX15+ D101 PEG_TX15+C47 PCI_AD29 D47 PCI_IRQD# C102 PEG_RX15- D102 PEG_TX15-C48 PCI_AD31 D48 PCI_CLKRUN# C103 GND D103 GNDC49 PCI_IRQA# D49 PCI_M66EN C104 VCC_12V D104 VCC_12VC50 PCI_IRQB# D50 PCI_CLK C105 VCC_12V D105 VCC_12VC51 GND D51 GND C106 VCC_12V D106 VCC_12VC52 PEG_RX0+ D52 PEG_TX0+ C107 VCC_12V D107 VCC_12VC53 PEG_RX0- D53 PEG_TX0- C108 VCC_12V D108 VCC_12VC54 TYPE0# D54 PEG_LANE_RV# C109 VCC_12V D109 VCC_12VC55 PEG_RX1+ D55 PEG_TX1+ C110 GND D110 GND](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-15.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 22Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualCompactFlash Connector Connector size: 2 x 25 = 50 pinsConnector location: J12 1 26 50 49 Pin Description Pin Description1 Gnd 2 Data 33 Data 4 4 Data 55 Data 6 6 Data 77 HDC CS100 8 Gnd9 Gnd 10 Gnd11 Gnd 12 Gnd13 +5V 14 Gnd15 Gnd 16 Gnd17 Gnd 18 Disk Address 219 Disk Address 1 20 Disk Address 021 Data 0 22 Data 1Connector Pin DefinitionPin Description Pin Description23 Data 2 24 IOCS16# (NC)25 CF_CD2# (Pull-down) 26 CF_CD1# (Pull-down)27 Data 11 28 Data 1229 Data 13 30 Data 1431 Data 15 32 HDC CS30033 CF_VS1# (NC) 34 IOR35 IOW 36 CF_WE# (+5V)37 Interrupt 15 38 +5V39 CF_CSEL# (Master or Slave) 40 CF_VS2# (NC)41 Reset # 42 IOCHRDY43 DMA REQ / DACK (NC) 44 DMA ACK# /CF_REG# (+5V)45 HDD Active Led 46 DMA66 Detect / CF_PDIAG#47 Data 8 48 Data 949 Data 10 50 Gnd](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-16.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 23Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualGPIO Connector Connector size: DSUB-9 pinConnector location: COM1Pin Description Pin Description1 GIN1 2 GIN2 3 GIN3 4 GIN4 5 GOUT4 6 GOUT17 GOUT2 8 GOUT39 GNDConnector Pin Definition5 19 6RS232 Connector: COM1, COM2Connector size: 2 x 10 = 20 Pins Pin Header, (2.0 mm Pitch)Connector location: COM1 (CN9), COM2 (CN7)CN10BOX-2.0mm-M-18013 425 67 8910Connector Pin DefinitionPin Definition Pin Definition1 DCD 2 RXD 3 TXD 4 DTR 5 Gnd 6 DSR 7 RTS 8 CTS 9 RI](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-17.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 24Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualRS232/485 Connector: COM3Connector size: 2 x 10 = 20 Pins Pin Header, (2.0 mm Pitch)Connector location: CN12CN10BOX-2.0mm-M-18013 425 67 8910Connector Pin DefinitionPin Definition Pin Definition1 DCD (RS232) TX-/RX- (RS485)2 RXD (RS232) TX+/RX+ (RS485)3 TXD (RS232) 4 DTR (RS232)5 Gnd 6 DSR (RS232)7 RTS (RS232) 8 CTS (RS232)9 RI (RS232)GAL Programmer PIN Header Connector size: 2.54mm-M-180Connector location: JP5JP5PIN-2.54mm-M-180123456Connector Pin DefinitionPin Definition Pin Definition1 +3.3V 2 GND3 TCK 4 TDO5 TDI 6 TMS](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-18.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 25Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualMCU Programmer Pin Header Connector size: 2.54mm-M-180Connector location: JP6JP6PIN-2.54mm-M-18012345Connector Pin DefinitionPin Definition Pin Definition 1 +3.3ALW 2 C2D 3 MRST 4 C2CK 5 GNDVGA Connector Connector size: DSUB-15Connector location: CON1Connector Pin DefinitionPin Definition Pin Definition1 RED 2 GREEN 3 BLUE 4 NC5 Gnd 6 Gnd7 Gnd 8 Gnd9 VCC 10 Gnd11 NC 12 DDCDAT13 Hsync 14 Vsync15 DDCCLK](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-19.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 26Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualLVDS Connector + USB0Connector size: 2 x 15 (2.0mm)Connector location: CN3CN3BOX-2.0mm-M-18013 425 67 8911 101213 14161517 18202224262830212325272919Connector Pin DefinitionPin Definition Pin Definition1 LVDS_CLK 2 LVDS_DAT3 Panel_VDD 4 LVDS_1(OUT0)5 LVDS_9(OUT3) 6 LVDS_0(OUT0#)7 LVDS_8(OUT3#) 8 Panel_VDD9 LVDS_GND 10 LVDS_GND11 LVDS_7(CLK) 12 LVDS_3(OUT1)13 LVDS_6(CLK#) 14 LVDS_2(OUT1#)15 LVDS_GND 16 LVDS_GNDPin Definition Pin Definition17 LVDS_5(OUT2) 18 Panel_backlight(+12V)19 LVDS_4(OUT2#) 20 Panel_backlight(+12V)21 LVDS_GND 22 Power on push buttom23 USB_0# 24 Contact_DET#25 USB_0 26 USB_VCC (+5V)27 USB_GND 28 USB_GND29 Panel_backlight(+12V) 30 GND](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-20.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 27Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualLAN Connector Connector size: RJ-45Connector location: LAN1Connector Pin DefinitionPin Definition Pin Definition1 TX+ 2 TX-3 RX+ 4 N/C15 N/C2 6 RX-7 N/C3 8 N/C49 LAN Speed LED 10 +3.3V11 LAN Link LED 12 +3.3VUSB Connector Connector location: USB1Connector Pin DefinitionPin Definition Pin Definition1 VCC 2 DATA-3 DATA+ 4 GND](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-21.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 28Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualConnector Pin DefinitionPin Definition Pin Definition1 VCC 2 DATA1-3 DATA1+ 4 GND5 VCC 6 DATA-7 DATA+ 8 GNDUSB Connector Connector location: USB2LVDS Power Connector Connector location: J51Connector Pin DefinitionPin Definition Pin Definition1 Panel_backlight 2 Panel_VDD3 GND 4 GND5 LVDS_PANEL 6 LVDS_BIASON](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-22.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 29Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualExternal 12V & 5V Power and SMBUS Connector Connector location: CN26341Connector Pin DefinitionPin Definition Pin Definition1 5V 2 12V3 SMBCLK 4 GND5 GND 6 SMBDATAMic-in Connector location: CN11 and CN15Connector Pin DefinitionPin Definition Pin Definition1 NC 2 MIC_JD3 NC 4 MIC_OUT5 GND 6 GND](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-23.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 30Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualLine-out Connector location: CN8 and CN14Connector Pin DefinitionPin Definition Pin Definition1 LINE_OUT_L 2 SURR_JD3 NC 4 LINE_OUT_R5 GND 6 GNDPCI-104 VI/O Voltage Setting Connector location: J13Connector Pin DefinitionPin No. Status Function Description 1-3, 2-4 (default) Short +3.3V 3-5, 4-6 Short +5V4 623 51](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-24.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 31Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualPCI-104 Connector Connector location: CN16Connector Pin DefinitionPower Button Connector location: SW1Reset Button Connector location: SW2](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-25.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 32Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualMCU COM Port Connector location: JP3Connector Pin DefinitionPin Function Description1 TX2 RX3 GNDACC_ON LED Connector location: JP71Connector Pin DefinitionPin Function Description1 +3.3V LED2 GND](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-26.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 33Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualTemp Sensor Connector location: JP81Connector Pin DefinitionPin Function Description1 SENSOR+2 GNDDC Power Input Connector Connector location: CN1Connector Pin DefinitionPin Function Description1 GND2 VIN (6V~36V)3 IGNITION](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-27.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 34Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualPower On and IDE Active LED Connector location: LED1T1B1Connector Pin DefinitionLED Function DescriptionT1 POWER LEDB1 HD LEDGPIO and UMTS LEDs Connector location: LED2T2B2LED I/O Port Address and DataLED Function DescriptionT2 I/O PORT Address: 0EE0; Bit0: 1 (Light), 0 (Dark)B2 UMTS STATUS](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-28.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 35Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualSerial ATA Connector location: CN617Connector Pin DefinitionPin Definition Pin Definition1 GND 2 SATA_TXP0 -3 SATA_TXN0 4 GND5 SATA_RXN0 6 SATA_RXP07 GNDSerial ATA Power Input Connector location: J1014Connector Pin DefinitionPin Definition Pin Definition1 +V12S 2 GND3 GND 4 +V5S](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-29.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 36Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualMini-PCIe Socket (for 3.5G module) PCIe InterfaceConnector location: CN10 125152Connector Pin DefinitionPin Definition Pin Definition Pin Definition Pin Definition1 MIC + 2 +V3.3S 27 GND 28 NC3 MIC - 4 GND 29 GND 30 NC5 SPK + 6 NC 31 NC 32 NC7 GND 8 USIM PWR 33 RESET 34 GND9 GND 10 USIM DATa 35 GND 36 USB_D-11 VCC_ MSM26_DIG12 USIM CLK 37 GND 38 USB_D+13 NC 14 USIM RST 39 +V3.3S 40 GND15 GND 16 NC 41 +V3.3S 42 LED_WWAN#17 NC 18 GND 43 GND 44 NC19 NC 20 W_DIS-ABLE#45 NC 46 NC21 GND 22 NC 47 NC 48 NC23 NC 24 NC 49 NC 50 GND25 NC 26 GND 51 NC 52 +V3.3SMini-PCIe Socket (for WLAN module) USB + PCIe InterfaceConnector location: CN13 125152Connector Pin DefinitionPin Definition Pin Definition Pin Definition Pin Definition1 WAKE# 2 +V3.3S 27 GND 28 +V1.5S3 NC 4 GND 29 GND 30 SMB_CLK5 NC 6 +V1.5S 31 PETn0 32 SMB_DATA7 CLKREQ# 8 NC 33 PETp0 34 GND9 GND 10 NC 35 GND 36 USB_D-11 REFCLK- 12 NC 37 NC 38 USB_D+13 REFCLK+ 14 NC 39 NC 40 GND15 GND 16 NC 41 NC 42 LED_WWAN#17 NC 18 GND 43 NC 44 LED_WLAN#19 NC 20 DISABLE# 45 NC 46 LED_WPAN#21 GND 22 PERST# 47 NC 48 +V1.5S23 PERn0 24 +3.3S 49 NC 50 GND25 PERp0 26 GND 51 NC 52 +V3.3S](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-30.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 37Chapter 2: Jumpers and ConnectorsVTC 6110 User ManualSIM Card Connector Connector location: CN4Connector Pin DefinitionPin Definition Pin DefinitionC1 POWER VOLTAGE C2 RESET SIGNALC3 CLOCK SIGNAL C5 GNDC6 VPP:PROGRAM VOLTAGE C7 I/OSW Contact present switchBluetooth Connector Connector location: J7J7JST-1mm-M-90123MH1MH245610987 Pin Definition Pin Definition1 GND 2 USB_6P_L3 USB_6N_L 4 NC5 NC 6 BT_AUDIO_EN_R7 NC 8 BT_3.3V9 NC 10 GND](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-31.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 38Chapter 3: System SetupVTC 6110 User ManualCh a p t e r 3: Sy S t e m Se t u pRemoving the Chassis CoverFront View2. Lift the cover upward then remove it from the chassis.Bottom ViewPrior to removing the chassis cover, make sure the unit’s power is off and disconnected from the power sources to prevent electric shock or system damage.1. The screws on the cover are used to secure the cover to the chassis. Remove these screws and put them in a safe place for later use. Rear View](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-32.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 39Chapter 3: System SetupVTC 6110 User ManualInstalling a GPRS/UMTS/HSDPA Module1. The Mini PCI Express slot shown below is used to install a 3.5G com-munication module such as GPRS, UMTS or HSDPA module.2. Insert the module into the Mini PCI Express slot at a 45 degrees angle until the gold-plated connector on the edge of the module completely disappears inside the slot.Mini PCI Express slotGPRS/UMTS/HSDPA moduleMini PCI Express slot](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-33.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 40Chapter 3: System SetupVTC 6110 User Manual3. Push the module down then secure it with mounting screws. 4. Attach one end of the RF cable onto the module.Attach RF cable to the module](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-34.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 41Chapter 3: System SetupVTC 6110 User Manual6. Mount the other end of the cable to the antenna mounting hole lo-cated at the front panel of the chassis.5. The photo below shows one end of the RF cable properly attached onto the module.RF cable mounted at the front panel](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-35.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 42Chapter 3: System SetupVTC 6110 User ManualInstalling a Wireless LAN Module1. The Mini PCI Express slot shown below is used to install a wireless LAN module.Mini PCI Express slot2. Insert the wireless LAN module into the Mini PCI Express slot at a 45 degrees angle until the gold-plated connector on the edge of the mod-ule completely disappears inside the slot.Wireless LANmoduleMini PCI Express slot](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-36.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 43Chapter 3: System SetupVTC 6110 User Manual4. Attach one end of the RF cable onto the module.Attach RF cable to the module3. Push the module down then secure it with mounting screws.](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-37.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 44Chapter 3: System SetupVTC 6110 User Manual5. The photo below shows one end of the RF cable properly attached onto the module.6. Mount the other end of the cable to the antenna mounting hole lo-cated at the front panel of the chassis.RF cable mounted at the front panel](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-38.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 45Chapter 3: System SetupVTC 6110 User ManualInstalling a Bluetooth Module1. The USB header shown below is used to install a Bluetooth module.USB header2. Install the provided mounting stud as shown in the illustration below.Mounting stud](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-39.png)
![Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 46Chapter 3: System SetupVTC 6110 User Manual3. Insert the Bluetooth module’s cable connector into the USB header. Push the module down then secure it with a mounting screw.Bluetooth moduleCable connectorMounting screw4. Attach one end of the RF cable onto the module.Attach RF cable to the module5. Mount the other end of the cable to the Bluetooth mounting hole located at the front panel of the chassis.](https://usermanual.wiki/NEXCOM/VTC6110X00.User-manual2/User-Guide-1350971-Page-40.png)