NEXXT SOLUTIONS XPYB3LL XpyBell User Manual JSW QSG RVDP OASP V1 1

Download:
Mirror Download [FCC.gov]
Document ID	3612534
Application ID	SRO5h2Ig3ScE7H4+Q/y4tg==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	56.07kB (700892 bits)
Date Submitted	2017-10-20 00:00:00
Date Available	2017-10-20 00:00:00
Creation Date	2017-08-28 03:55:44
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-10-17 09:07:35
Document Title	JSW_QSG_RVDP-OASP_V1.1
Document Creator	Adobe Illustrator CS6 (Windows)

QUICK START GUIDE
1. App Download and Installation
(1) Please download and install the "OMGuard HD” APP to your device.
KIT CONTENT :
Battery (Type AA)
Wall-Bracket
RVDP
SETUP THE VIDEO DOORPHONE
DC Power Cable
Black
x1
Dry/Wet Contact Cable
x4
x1
For iOS
Red
x1
Quick Start Guide
Screw Pack
Black
Black
Note:
x3
x1
x1
For video recording, BE SURE TO use CLASS 10 memory card or above . Other kinds of memory card may cause
unexpected results and should be avoided.
Memory Card Slot
I/O Pin Connector
HD Camera
DOXX-123456-ABCDE
Speaker
Doorbell Button
Microphone
Battery Compartment
2. Insert Batteries
(1) Unscrew the battery compartment screw
with spplied screw driver.
(2) Insert the batteries supplied. Make sure the
polarity is as indicated before inserting the
battery cartridge back to RVDP.
(3) After the batteries are inserted, the Push
Button illuminator will light up and flash,
indicating RVDP is ready for further setup.
Note: If the illuminator is not lighted,
press/hold the Reset Button for 5 seconds
until the illuminator lights up and flash.
HARDWARE OVERVIEW
1. AC/DC: Power Input I/O *
2. O2/O1: Wet Contact I/O
3. B2/B1: Dry Contact I/O
4. B2/B1: Dry Contact I/O
Reset Button
*Power input jack can be safely connected with
AC/DC 9~36V power cable in any polarity
For Android
DOXX-123456-ABCDE
Reset
(3)
(1)
(2)
3. Setup RVDP via App
(1) While the push button illuminator is flashing Red&Blue,
launch the app and tap
to add device.
(2) Scan QR code to bring up the DID or enter the DID manually
(The DID sticker is located at the back of the RVDP )
(3) Enter name for your RVDP (maximum 20 characters).
(4) Enter default Security Code: 123456.
(5) Tap "Save" and follow in-app wizard to complete the setup.
DOXX-123456-ABCDE
Device ID: DOXX-123456-ABCDE (On Sticker)
Wi-Fi Pairing Mode:
SSID: RVDP-XXXXXX
Default PW:12345678
Note: On the back of the RVDP you will find DID label containing
DID number, which you will need later on when resetting device.
DOORPHONE INSTALLATION
ANSWERING A CALL
Note:
(A) Battery Power Option is being illusestred here, therefore if you wish to power the RVDP via existing doorbell wires or optional
adaptor, please refer to owner's manual for more details.
(B) Before installation begins, it is suggested to turn off the "Power Saving" mode so you can have continuous connection via the
live-video while defining the installation location/height. Please refer to Power Saving Mode section of this document.
(1) Secure the wall bracket on a stable surface
(2) Mount the RVDP onto the wall bracket
(3) Secure the RVDP via the screw supplied.
(1)
(2)
(3)
LIVE VIEW / SNAPSHOT / RECORDING
LIVE VIDEO*
Main Page
Above screen would appear When visitor
pressed the bell button.
1. Ignore the visitor call request.
2. Accept the visitor call request.
Note: For iOS user, due to the system fundamental structural design, you will have to
confirm/accept incoming visitor call request via pop-ups first before the answering
section would appear. For more details, please refer to the manual.
PLAYBACK
(1) Tap the Device Setting and then the Event List icon.
(2) Select the time interval for the event list.
(3) Tap to select the file for playback.
Live View
(4) If you want to store the file in mobile device, tap
to download the file (best while
under Wi-Fi environment due to large high definition data size).
Live View
Video Record
Add Device
Device Setting
Phone Mode Talk
Refresh
Hand-Free Talk
Information
3rd Party Lock/Gate Control
Video On/Off
Mute/Unmute
Snapshot
*Available while RVDP not in Power Saving Mode.
POWER SAVING MODE
ADDITIONAL WIRING DIAGRAMS
(1) While in the device list section, tap
A. Electronic Lock
(2) Tap
Live View
to bring up edit option icons.
to enter System Info
(3) Select "Advanced" and enter default password: 123456.
(4) Scroll down to the Power Saving section and select desire power saving time.
Note: It is suggested to set the Power Saving to 30 seconds to maximize battery power.
Lock
Note: For remote door unlock function with 12V/1A current output trigger, the direct input
power must be higher or equal to AC or DC 15V/1.5A.
B. Existing Bell Wiring
Device will return to sleep mode after:
After device wakeup on visitor call or motion-detect event; the device will automatically goto sleep
mode again in any of the following conditions:
A. When preset power saving time (30s/60s/90/120s) is reached after a visitor or motion events
B. After user answer a visitor call or check live view from a motion-detect event using the APP and
then exit the APP.
C. When device cannot connect to the pre-set Wi-Fi network for any reason; the device will retry the
connection for 30 seconds, if Wi-fi connection still can not establish after 30 seconds, the reconnect
attempt will be stopped and the device will enter power saving mode again.
DoorBell
C. Electronic Gate(2/4-Wire Type Connection)
4-WIRE TYPE CONNECTION DIAGRAM
Live View
Input
B2
B1
Power
2-WIRE TYPE CONNECTION DIAGRAM
B2
B1
Power
Please note this device supports operation using both batteries (AA battery x4) and power from existing
doorbell power lines (9V~36V AC/DC); however, there are certain function limitation when the device is
running under battery mode:
*Once the device is in sleep mode; the user can no longer access the device from their mobile
device. The device will only become online when the motion detector has detected an event,
or by pressing the power button at the bottom of the device.
DEVICE SETTING TIPS
Gate
How to Maximized Battery Power:
When device is using battery power, we suggest using the following setting to maximize battery power
• Install the doorphone where it can receive excellent Wi-Fi network signals (Weak Wi-Fi signal will force
doorphone to operate using higher Wi-Fi Power, which may consume more power).
• Set Auto Sleep Timer to 30 seconds.
• Do not stay in live view or system setting mode unless it’s necessary.
FCC Statement
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions (1)this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
The product from the body using the distance of not less than 20 cm
FCC Compliance Statement: This device complies with Part
15 of the FCC rules. Operation is subjected to the following
two conditions: (1)this device may not cause harmful
interference, and (2) this device must accept any
interferencereceived, including interference that may cause
undesired operation.
Products with CE Marking comply with EMC Directive
(2014/30/EU); Low Voltage Directive (2014/35/EU); RED
(2014/53/EU); ROHS Directive (2011/65/EU) issued by the
Commission of the European Community. Compliance
with these directives implies conformity to the following
European Norms:
EMC: EN 301 489
LVD: EN 60950
Radio: EN 300 328
If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid statutory regulations.
Disposal of spent batteries/accumulators:
You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent batteries/accumulators with
common household waste is prohibited! Batteries/accumulators that contain hazardous substances are marked with the symbols on the
side. These symbols indicate that it is prohibited to dispose of these batteries/accumulators in the household waste. The abbreviations for the
respective heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be
charged to the designated collection points in your community, outlets or wherever batteries or accumulators are sold. Following these

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:08:28 03:55:44+08:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2017:10:17 09:07:35+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : JSW_QSG_RVDP-OASP_V1.1
Metadata Date                   : 2017:10:17 09:07:35+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 44
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 6036 bytes, use -b option to extract)
Instance ID                     : uuid:e73e8cf6-b52f-4ae2-af8c-a4f95bad883a
Document ID                     : xmp.did:AE5E67B2618BE711B8A9FB642D3A5B28
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:83A4175F5C8BE711B8A9FB642D3A5B28
Derived From Document ID        : xmp.did:83A4175F5C8BE711B8A9FB642D3A5B28
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:939D644CEC45E311BF40FCCBC46B3F76, xmp.iid:AE5E67B2618BE711B8A9FB642D3A5B28
History When                    : 2013:11:05 16:19:57+08:00, 2017:08:28 03:55:37+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : D:\Product Technical Document\SAPP-ES\iOS.png, D:\Product Technical Document\SAPP-ES\iOS.png, D:\Product Technical Document\SAPP-ES\iOS.png, D:\Video\RVDP\RVDP-GSO\RVDP-GS0_相關素材\Liveview.jpg, D:\Video\RVDP\RVDP-GSO\RVDP-GS0_相關素材\Liveview.jpg, D:\Product Technical Document\RVDP-GSO\Screenshot\2016-06-22-15-40-08.png, D:\Video\RVDP\RVDP-GSO\RVDP-GS0_相關素材\Liveview.jpg, D:\Video\RVDP\RVDP-GSO\RVDP-GS0_相關素材\Liveview.jpg, D:\Product Technical Document\RVDP-GSO\Screenshot\2016-06-22-15-40-08.png, G:\JSW Corp_天鉞\Symbol_Icon_Logo_配件線圖\CE.png, G:\JSW Corp_天鉞\Symbol_Icon_Logo_配件線圖\FCC.png, D:\Video\RVDP\RVDP-GSO\RVDP-GS0_相關素材\Liveview.jpg, D:\Video\RVDP\RVDP-GSO\RVDP-GS0_相關素材\Liveview.jpg, D:\Product Technical Document\SAPP-ES\Android.jpg, D:\Product Technical Document\SAPP-ES\iOS.png, C:\Users\user\Pictures\lock.png, D:\Product Technical Document\RVDP-GSO\Screenshot\2016-06-22-15-40-08.png, D:\Product\RVDP-GS\images\add_iOS.PNG, D:\Chuck\OMG_1.1\UI\Assets\playback\xhdpi\btn_download_playback.png, D:\Chuck\OMG_1.1\UI\Assets\playback\xhdpi\btn_download_playback.png, G:\JSW Corp_天鉞\Manual\_SAPP-AS\links\Screenshot_2015-12-14-16-29-11.png, G:\JSW Corp_天鉞\Manual\_SAPP-AS\links\p19-01.jpg, G:\JSW Corp_天鉞\Manual\_WAPP-GO3IS\link\iOS\IMG_0059_02.png
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 296.999959
Max Page Size H                 : 210.002169
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, ArialMT, Calibri, MyriadPro-BoldIt, MyriadPro-Semibold, MyriadPro-SemiboldSemiCn, MyriadPro-Regular, MyriadPro-SemiboldSemiCnIt, MyriadPro-It, MyriadPro-SemiboldIt, Lato-Semibold
Font Family                     : Arial, Arial, Calibri, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Lato Semibold
Font Face                       : Bold, Regular, Regular, Bold Italic, Semibold, Semibold SemiCondensed, Regular, Semibold SemiCondensed Italic, Italic, Semibold Italic, Semibold
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown
Font Version                    : Version 3.00, Version 3.00, Version 1.02, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : arialbd_1.ttf, arial_1.ttf, CALIBRI_1.TTF, MyriadPro-BoldIt.otf, MyriadPro-Semibold.otf, MyriadPro-SemiboldSemiCn.otf, MyriadPro-Regular.otf, MyriadPro-SemiboldSemiCnIt.otf, MyriadPro-It.otf, MyriadPro-SemiboldIt.otf, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000004
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 4
For                             : PR02(�Ӧ���),
Bounding Box                    : 0 0 842 875
Container Version               : 11
Creator Version                 : 15
Image Height                    : 875
Image Width                     : 842
Image Size                      : 842x875
Megapixels                      : 0.737

EXIF Metadata provided by EXIF.tools