NIDEC MOBILITY GHR-M010 Remote engine starter (FOB) User Manual GHR M010 UserManual draft revB

OMRON Automotive Electronics Co. Ltd. Remote engine starter (FOB) GHR M010 UserManual draft revB

(Short-Term Confidential) User Manual

We recommend that you replace the batteries after one year's use as a guide. Batteries: CR2032 x 2 1. Pressing the Engine control button for more than 1 second. 2. Release the Engine control button, and then press the Unlock/Start button. (The vehicle engine will start.) 3. If a response signal from the vehicle is properly received, the LED indicators will be blinked. 1. Pressing the Engine control button for more than 1 second. 2. Release the Engine control button, and then press the Lock/Stop button. (The vehicle engine will stop.) 3. If a response signal from the vehicle is properly received, the LED indicators will be blinked. ・Pressing the Lock/Stop button, the vehicle door will be locked. ・Pressing the Unlock/Start button, the vehicle door will be unlocked. Remocon Engine Starter operation manualFCC/ IC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Tout changement ou toute modification effectués par l’utilisateur et dont la conformité n’est pas expressément approvée par l’organisme responsable de sa conformité peut entraîner l’annulation de droit de cet utilisateur de se servir de l’équipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2)l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. After sales service ４Transmission frequency 902 MHz～928MHz band Transmission power < 20mW Antenna chip antenna Transmission frequency 315 MHz Transmission power < 75.6dBuV/m @3m Antenna PWB pattern antenna Switches Lock/Stop, Unlock/Start, Engine control Link state acknowledgment LED indicators Battery Lithium battery (CR2032 x 2) Operation temperature range -20 ℃ to +60 ℃ (-4°F to 140°F) Dimensions 81.5 mm x 30 mm x 13 mm ( not including protrusion) Weight 37 g Antenna moduleTransmission frequency 902 MHz～928MHz band Transmission power < 20mW Power supply 4.2 V Current consumption 3 mA (for receiving) Antenna 1/4 lambda printed antenna Operation temperature range -30 ℃ to +85 ℃ (-22°F to 185°F) Dimensions 52 mm x 25 mm x 52 mm Weight 35 g Main specification ３Door lock / unlockRemote engine stop Remote engine start How to use ２ 1. Remove the battery cover Battery coverRemove the screw and the battery cover. Lithium batteries (CR2032 x 2) Screw2. Take out the old batteries Insert the flathead screw driver which put cloth and take out theold batteries. 3. Replace the new batteries Insert the new batteries (CR2032)with the positive ( + ) side facing up. 4. Place the battery cover Place the battery cover and fasten the screw. How to replace the batteries Battery replacement Key fob LED indicatorsLock/Stop button Unlock/Start button Engine controlbutton Ring Battery cover Product label Parts names Configuration １ For after sales service, contact : OMRON Automotive Electronics Co. Ltd. 6368 nenjyozaka, okusa Komaki, Aichi 485-0802 JAPAN URL: http://www.oae.omron.co.jp Regulatory compliance Key fob
Regulatory complianceThis equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption rate (SAR). Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation du débit d’absorption spécifique (DAS). [Key fob] This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation de l’exposition maximale autorisée (MPE). [Antenna module]

Navigation menu