NIDEC MOBILITY GHR-M010 Remote engine starter (FOB) User Manual GHR M010 UserManual draft revB
OMRON Automotive Electronics Co. Ltd. Remote engine starter (FOB) GHR M010 UserManual draft revB
(Short-Term Confidential) User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2645589 |
| Application ID | jauVtqBI0l7AYJzWWM5aDg== |
| Document Description | (Short-Term Confidential) User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 15.6kB (194972 bits) |
| Date Submitted | 2015-06-12 00:00:00 |
| Date Available | 2015-12-09 00:00:00 |
| Creation Date | 2015-06-11 10:59:20 |
| Producing Software | Acrobat Distiller 10.1.9 (Windows) |
| Document Lastmod | 2015-06-11 10:59:20 |
| Document Title | Microsoft Word - GHR-M010_UserManual_draft_revB |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | 010940071 |
Remocon Engine Starter operation manual １ Door lock / unlock Configuration ・Pressing the Lock/Stop button, the vehicle door will be locked. Parts names ・Pressing the Unlock/Start button, the vehicle door will be unlocked. Key fob LED indicators Product label Lock/Stop button Unlock/Start button Engine control button ３ Main specification Key fob Battery cover Ring Transmission frequency Transmission power Antenna 902 MHz～928MHz band < 20mW chip antenna Transmission frequency Transmission power Antenna 315 MHz < 75.6dBuV/m @3m PWB pattern antenna Switches Link state acknowledgment Battery Operation temperature range Dimensions Weight Lock/Stop, Unlock/Start, Engine control LED indicators Lithium battery (CR2032 x 2) -20 ℃ to +60 ℃ (-4°F to 140°F) 81.5 mm x 30 mm x 13 mm ( not including protrusion) 37 g Antenna module Transmission frequency Transmission power Power supply Current consumption Antenna Operation temperature range Dimensions Weight Battery replacement 902 MHz～928MHz band < 20mW 4.2 V 3 mA (for receiving) 1/4 lambda printed antenna -30 ℃ to +85 ℃ (-22°F to 185°F) 52 mm x 25 mm x 52 mm 35 g We recommend that you replace the batteries after one year's use as a guide. Batteries: CR2032 x 2 ４ How to replace the batteries Battery cover Screw 1. Remove the battery cover After sales service For after sales service, contact : OMRON Automotive Electronics Co. Ltd. 6368 nenjyozaka, okusa Komaki, Aichi 485-0802 JAPAN URL: http://www.oae.omron.co.jp Remove the screw and the battery cover. Regulatory compliance FCC / IC CAUTION 2. Take out the old batteries Insert the flathead screw driver which put cloth and take out the old batteries. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 3. Replace the new batteries Insert the new batteries (CR2032) with the positive ( + ) side facing up. Lithium batteries (CR2032 x 2) 4. Place the battery cover Place the battery cover and fasten the screw. ２ How to use Remote engine start Tout changement ou toute modification effectués par l’utilisateur et dont la conformité n’est pas expressément approvée par l’organisme responsable de sa conformité peut entraîner l’annulation de droit de cet utilisateur de se servir de l’équipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1. Pressing the Engine control button for more than 1 second. 2. Release the Engine control button, and then press the Unlock/Start button. (The vehicle engine will start.) 3. If a response signal from the vehicle is properly received, the LED indicators will be blinked. Remote engine stop 1. Pressing the Engine control button for more than 1 second. 2. Release the Engine control button, and then press the Lock/Stop button. (The vehicle engine will stop.) 3. If a response signal from the vehicle is properly received, the LED indicators will be blinked. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2)l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Regulatory compliance [Key fob] [Antenna module] This equipment complies with FCC/IC radiation exposure limits set forth This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without testing of specific absorption rate (SAR). deemed to comply without maximum permissive exposure evaluation (MPE). Cet équipement est conforme aux limites d’exposition aux rayonnements Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme équipement émet une énergie RF très faible qui est considérée conforme sans évaluation du débit d’absorption spécifique (DAS). sans évaluation de l’exposition maximale autorisée (MPE).
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : 010940071 Create Date : 2015:06:11 10:59:20+09:00 Modify Date : 2015:06:11 10:59:20+09:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 10.1.9 (Windows) Format : application/pdf Title : Microsoft Word - GHR-M010_UserManual_draft_revB Creator : 010940071 Document ID : uuid:14b4224a-e2c3-4008-bbcd-95ff81a56339 Instance ID : uuid:7fa20989-0d84-4370-91d5-0302f66c03ef Page Count : 2EXIF Metadata provided by EXIF.tools