NINGBO DOOYA MECHANIC and ELECTRONIC TECHNOLOGY DC146 Emitter User Manual

NINGBO DOOYA MECHANIC & ELECTRONIC TECHNOLOGY CO., LTD. Emitter

Users Manual

DC146/DC147 special-purpose emitter for curtain motorDC147 five channels double way emitterDC147 five channels double way emitterDC146 single channel double way emitterDC146 single channel double way emitterDC146 single channel double way emitter: A way and B way can be chosen,each way cancontrol one set curtain motor separately.A way and B way don`t interfere each otherDC147 five channels double way emitter: Each channel had the same function with DC146.When pressing channel-shift button and all the channel-shift display lamps light,that means the group control status.Under the status of group control,Pressing A way buttons will start the group-control function of A way,A way of all the channels will be availabe.Pressing B way buttons will start the group-control function of B way,b way of all the channels will be availabe.The backside of DC147The backside of DC146Version No: A 01B way set button(P2b)Special-purpose emitter for curtain motorSpecial-purpose emitter for curtain motorDC146DC146DC147DC147Press the set button of curtain motor for about 2SThe display lamp of the curtain motor is constant on,loosen the set button of curtain motorPress the emitter A way curtain-close button oncePress the emitter A way curtain-open button onceOKEmitter A way programming adding emitter set are finishedCancelling all emitters is finishedThe curtain motor are connecting with the powerPress the set button of curtain motor for about 2SThe display lamp of the curtain motor is constant on,loosen the set button of curtain motorThe curtain motor are connecting with the power12121The display lamp of curtain motor flashes a few times and then goes outThe display lamp of curtain motor flashes a few times and then goes outEmitter A way cancelling is finishedSwitch off the power for curtain motorPress the set button of curtain motor and don`t lossenSwich on the power of curtain motorWhen the curtain motor display lamp flashes several times and then goes out,loosen the set buttonThe curtain motor are connecting with the powerThe function of pulling and guiding by handThe function of pulling and guiding by handPull once the curtain by hand to the desired derectionThe curtain will move toward the function automaticallyPress the set button of curtain motor for about 2SThe display lamp of the curtain motor is constant on,loosen the set button of curtain motorPress the emitter A way curtain-stop button onceThe display lamp of curtain motor flashes a few times and then goes outPull once the curtain by hand to the desired derectionThe curtain is unmoved,the function of pulling and guiding by hand is closedRepeat the above set,the function of pulling and guiding by hand will startCancelling all emitters is finishedCancelling all emitters is finishedCancel one channel of emitterCancel one channel of emitterSet up and add emitterSet up and add emitterAdditionalFunctionAAAdditionalFunctionAAAdditionalFunctionAAAdditionalFunctionAAThe interval of re-switch on mustover 10 secondsA way curtain-open buttonA way curtain-close buttonA way curtain-stop buttonA way curtain-open buttonA way curtain-close buttonA way curtain-stop buttonB way curtain-close buttonB way curtain-open buttonB way curtain-stop buttonB way curtain-close buttonB way curtain-open buttonB way curtain-stop buttonChannel shift buttonChanneldisplayB way set button P2b A way set button P2a B way set button P2b A way set button P2a
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 this device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation.changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio TV technician for help.RF Exposure Statement FCC RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.NoticesNotices

Navigation menu