Napoleon Fireplaces Indoor Fireplace Users Manual

FirePlace to the manual 9199de7d-5a29-4218-957b-1716830c7c48

2015-02-05

: Napoleon-Fireplaces Napoleon-Fireplaces-Indoor-Fireplace-Fireplace-Users-Manual-493360 napoleon-fireplaces-indoor-fireplace-fireplace-users-manual-493360 napoleon-fireplaces pdf

Open the PDF directly: View PDF PDF.
Page Count: 22

Scroll down to view the document on your mobile browser.
1W415-0619 / B / 03.03.08INSTALLATION ANDOPERATION INSTRUCTIONSWolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 4Y8 Canada • (705)721-1212 • fax(705)722-6031www.napoleonreplaces.com • ask@napoleon.on.caCERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS: CSA 2.22, ANSI Z21.50 FOR VENTED GAS FIREPLACE.GT8NNATURAL GASGT8PPROPANE- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.- WHAT TO DO IF YOU SMELL GAS: ● Do not try to light any appliance. ● Do not touch any electrical switch; do not use     any phone in your building. ● Immediately call your gas supplier from a      neighbour’s phone. Follow the gas supplier’s     instructions.  ● If you cannot reach your gas supplier, call the      fire department.- Installation and service must be performed by a qualified installer, service agency or the supplier. SAFETY INFORMATIONCertified for Canadian and United States using ANSI/CSA Methods.If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.!WARNINGINSTALLER:  LEAVE THIS MANUAL WITH THE APPLIANCE.CONSUMER:  RETAIN THIS MANUAL FOR FUTURE REFERENCE.$10.00
2W415-0619 / B / 03.03.08 PG 2-5  INTRODUCTION       Warranty       General Instructions       General Information        Care of Glass and Plated Parts       Dimensions5-10  VENTING        Venting Lengths and  Air Terminal Locations       Vent Installations        Typical Vent Installations - Horizontal Termination        Typical Vent Installations - Vertical Termination        Minimum Air Terminal Location Clearances        Venting Application Flow Chart  10-15  INSTALLATION/FRAMING       Wall and Ceiling Protection       Vertical Installation        Using Flexible Vent Components        Horizontal Air Terminal Installation       Vertical Air Terminal Installation             Fireplace Vent Connection        Mobile Home Installation       Gas Installation       Electrical Connection       Stand-off Assembly       Nailing Tab Installation       Framing        Clearance to Combustibles  •  Do not burn wood or other materials in this fi replace.•  Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition.    Supervise young children when they are in the same room as the fi replace.•  Clothing or other fl ammable material should not be placed on or near the fi replace.•  Due to high temperatures, the fi replace should be located out of traffi c and away from furniture and draperies.•  Ensure you have incorporated adequate safety measure to protect infants/toddlers from touching hot surfaces.•  Even after the fi replace is out, the glass and/or screen will remain hot for an extended period of time.•  Check with your local hearth specialty dealer for safety screens and hearth guards to protect children from hot surfaces. These screens and guards     must be fastened to the fl oor.•  Any safety screen or guard removed for servicing must be replaced prior to operating the fi replace.•  It is imperative that the control compartment and burner in the fi replace and venting system are kept clean. The fi replace and its venting system      should   be inspected before use and at least annually by a qualifi ed service person. More frequent cleaning may be required due to excessive lint      from carpeting, bedding material, etc. The fi replace area must be kept clear and free from combustible materials, gasoline and other fl ammable      vapours and liquids.•  Under no circumstances should this fi replace be modifi ed.• This fi replace must not be connected to a chimney fl ue pipe serving a separate solid fuel burning appliance.•  Do not use this fi replace if any part has been under water. Immediately call a qualifi ed service technician to inspect the fi replace and to replace any     part of the control system and any gas control which has been under water.•  Do not operate the fi replace with the glass door removed, cracked or broken. Replacement of the glass should be done by a licensed or qualifi ed     service person.•  Do not strike or slam shut the fi replace glass door.•  The glass door must be kept closed while the fi replace is operating to prevent exhaust fumes containing carbon monoxide, from entering into the      home.  Temperatures of the exhaust escaping through this opening can also cause the surrounding combustible materials to overheat and catch fi re.•  Only doors / optional fronts certifi ed with the unit are to be installed on the appliance.TABLE of CONTENTSNOTE:  Changes, other than editorial, are denoted by a line in the margin.This appliance may be installed as an OEM installation in a manufactured home (USA only) or mobile home and must be installed in accordance with the manufacturers instructions and the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 in the United States or in the Mobile Home Standard, CAN/CSA Z240 MH, Series in Canada.This appliance is only for use with the type of gas indicated on the rating plate.  This appliance is not convertible for use with other gases, unless a certifi ed kit is used.This appliance may be installed in an aftermarket, permanently located, manufactured home (USA only) or mobile home, where not prohibited by local codes.This appliance is only for use with the type of gas indicated on the rating plate.  This appliance is not convertible for use with other gases, unless a certifi ed kit is used.15-17  FINISHING     Door Removal        Glass Removal       Frame/Front Installation        Accent Glass Installation        LK8 Light Installation (Optional) 18   OPERATING INSTRUCTIONS    19   MAINTENANCE 19   ADJUSTMENTS      Gas Pressure Adjustment       Venturi Adjustment       Flame Characteristics20   REPLACEMENTS     Replacement Parts        Flexible Vent Kits       Terminal Kits       Accessories  !WARNING

Navigation menu