Nedap N V SFSB Data Transmission System applied with a Sensor Bridge for lamps User Manual 20110223 Manual Nedap acsens4

Download:
Mirror Download [FCC.gov]
Document ID	1430167
Application ID	t/qXMAlM6JjXTbTVGjz2QA==
Document Description	User manual 02
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.13kB (776669 bits)
Date Submitted	2011-03-11 00:00:00
Date Available	2011-03-11 00:00:00
Creation Date	2011-02-23 15:07:23
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2011-02-23 15:07:23
Document Title	Microsoft Word - 20110223 Manual Nedap acsens4
Document Creator	PScript5.dll Version 5.2.2
Document Author:	l.hones

Option for Nedap Luxon wireless light control system
The Sensor Bridge is introduced to add commercially available sensors to the Nedap Luxon light control system.
Once installed the Sensor Bridge is part of the Senzafil Mesh Network.
Sensor data is transferred by this RF network to minimize wiring efforts.
Amongst the validated sensors you will find sensors to detect light level, movement or room occupancy.
Now it is easy to add sensing capabilities to your Luxon E-series light control system to save more energy.
The Luxon Sensor Bridge consists two main parts:
The dome with the RF electronics and microcontroller
The base is used for cable connections for power and sensor.
Figure 1: Luxon Sensor Bridge, version for surface mounting
Powering:
The Sensor Bridge is powered from a mains adapter or similar DC-source supplying 12 to 24V. This voltage is also available
for the sensor, so you can choose the supply voltage depending on the voltage needed for the sensor to be used.
Power connection via either a standard DC-plug or screw terminals.
Option for Nedap Luxon wireless light control system
LIGHT SENSOR
MAINS ADAPTER
NEDAP RF SENSOR BRIDGE
MOVEMENT SENSOR
Figure 2: Wiring overview for the Luxon Sensor Bridge
Compatible sensors:
Many sensor types can be used:
- Switches;
- 1 to 10V dimmers (resistive and electronic potentiometers);
- Light sensors;
- Sensors for detection of movement and / or room occupancy.
To select an appropriate sensor that fits your application and your preferences, please use the listing available on our web
site www.nedaplightcontrols.com.
The Sensor Bridge may only be installed and configured by qualified and trained personnel.
For an installation example please see figure 3 below.
The Sensor Bridge can be ordered for surface mounting or for recessed mounting; the dome should always point
downwards if mounted at approximately the same height as the Senzafil lamp drivers. For recessed mounting, both
clamps can be used to secure the unit to a ceiling element. After finishing the connections, the dome shall be secured to
the base using four torx screws. After powering the Sensor Bridge it shall be configured using the Senzafil Configuration
Tool. From the pick list you can easily select the used sensor with its characteristics.
Option for Nedap Luxon wireless light control system
HID LAMPS WITH
NEDAP LAMP
BALLAST
SKYLIGHT
NEDAP LUXON SENSOR
BRIDGE WITH LIGHT
SENSOR
SKYLIGHT
SENSOR
DATA FLOW
IN SENZAFIL
RF MESH
NETWORK
NEDAP LUXON LIGHT
CONTROLLER
Figure 3: Installation example for the Sensor Bridge with HID lamps controlled via the
Wireless Senzafil Mesh Network in a building with skylights.
Option for Nedap Luxon wireless light control system
Description
Details
Supply Voltage
10 to 28VDC
Supply current
Mains adapter
Sensor Bridge: max 100mA, standby < 20mA
External sensor: max 200mA
12V / 4W or
specification
24V / 6W
Dimensions
Diameter: 130 mm, Height 70 mm
Weight
0.23kg including cable glands
Enclosure
protection
Housing colors
Connector
IP67 (the enclosed
enclosed cable glands must be used properly)
Base: light gray, top: milky grey-white
power: standard DC jack with 2.0 mm centre pin or 2 screw terminals 30-18 AWG, or 0.25 to 1.5 sq.mm.
sensor: 3 screw terminals 30-18 AWG, or 0.25 to 1.5 sq.mm.
United States and Canada
An UL listed mains adapter shall be used that meets the NEC Class 2 requirements
Safety
The Sensor bridge is designed to meet UL619
UL619
Europe
An EN60950 compliant mains adapter must be used
United States and
and Canada
FCC47 part 15
EMC
Europe
EN301
EN301 489489-1 and 489489-3
EN300 328
Temperature
Operating 0 – 60°C, Storage -20 to 80°C
Humidity
25 to 95 % RH. Condensing and icing max 5% of time
Luxon Sensor Bridge for surface mounting: 8018669, ordering nr. 9949348
Luxon Sensor Bridge for recessed mounting: 8019037, ordering nr. 9949356
Option for Nedap Luxon wireless light control system
FCC Declarations
Compliance statement (part 15.19)
This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Déclaration Conformité
Conformité
Cet appareil se conforme aux normes RSS exemptés de license du Industry Canada.
L'opération est soumis aux deux conditions suivantes
(1) cet appareil ne doit causer aucune interférence, et
(2) cet appareil doit accepter n'importe quelle interférence, y inclus interférence qui peut causer une opération non pas voulu de cet appareil.
Warning (part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
RF Exposure
Exposure (OET Bulletin 65)
To comply with FCC RF exposure requirements for mobile transmitting devices, this transmitter should only be used or installed at locations where
there is at least 20cm separation distance between the antenna and all persons.
Version:
0.4
Date:
20110223

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 5
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2011:02:23 15:07:23
Modify Date                     : 2011:02:23 15:07:23
Title                           : Microsoft Word - 20110223 Manual Nedap acsens4
Creator                         : PScript5.dll Version 5.2.2
Author                          : l.hones

EXIF Metadata provided by EXIF.tools