Netgear orporated WG311T2 802.11b/g PCI Adapter User Manual WG311T install guide r1

Download:
Mirror Download [FCC.gov]
Document ID	428575
Application ID	ob6sXkxDKWHh8Go64v/Xqw==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.78kB (759766 bits)
Date Submitted	2004-06-07 00:00:00
Date Available	2004-06-04 00:00:00
Creation Date	2003-12-18 14:30:33
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2004-06-04 16:43:25
Document Title	WG311T install guideÄ.r1
Document Creator	QuarkXPressª 4.11: AdobePS 8.5.1
Document Author:	Rich

WG311T install guideƒ.r1
12/18/03
2:30 PM
Page 1
2 a.
Next, install the WG311T Wireless PCI Adapter
108 Mbps Wireless PCI Adapter WG311T
Installation Guide
b.
Shut down the PC and remove the power cord from the PC.
Insert the WG311T Wireless PCI Adapter into an available PCI
slot. Connect the antenna to the adapter and position the
antenna to the up position. Reconnect the power cord and
reboot the computer.
After a short delay, the Found New Hardware Wizard displays.
Click Next to proceed with the wizard.
Follow these quick steps to install your WG311T
PCI Adapter.
Note: If a Windows XP logo testing warning appears, click
Continue Anyway to proceed.
The basic installation and configuration instructions below assume that your
wireless network connection will be to an access point, and you are not
using WEP security. Please refer to the Reference Manual on the 108 Mbps
Wireless PCI Adapter Resource CD for detailed instructions on configuring
WEP, using Ad-Hoc mode, or using advanced options.
•
When prompted, select your country.
•
When prompted to enable the NETGEAR Smart Wireless
Settings Utility, click Yes to accept this option.
1 a.
b.
Power on your desktop and log into the Windows Operating System
Insert the 108 Mbps Wireless PCI Adapter Resource CD into your
CD-ROM drive. The CD main page shown below will load.
If you choose No, you must read the Windows XP documentation
for an explanation of how to use the Windows XP wireless network
configuration utility.
WG311T Smart Wireless Settings Utility.
Click the Install Driver & Utility link.
d.
Follow the InstallShield Wizard steps, and click Finish when done.
If prompted to Restart the computer, choose Shut Down.
Change the Network Name SSID to match your network.
Tip: As an alternative to typing in the SSID, you can use the
drop-down list or the Networks tab to view the available wireless
networks, and choose the one you want.
c.
Click Apply to activate the connection.
d.
You can also enter a profile name and click Save Profile to store
the current settings.
Note: The status bar at the bottom of the utility reports the speed of
your connection. 108 Mbps speed is only possible when your wireless
network has a 108 Mbps access point such as in the NETGEAR
WGT624 108 Mbps Wireless Firewall Router.
only the first two tab pages of the Netgear Smart Wireless Settings utility
will appear.
configure your WG311T
3 Now,
a. Click the
icon in the Windows system tray to open the
c.
b.
4 Finally, verify wireless network connectivity
Note: When the Windows XP wireless configuration utility is enabled,
Windows XP Basic Installation
First, install the WG311T software
The utility opens to the Settings tab page.
To see the full NETGEAR utility, please refer to the Reference Manual
on the 108 Mbps Wireless PCI Adapter Resource CD.
a.
Verify that your connection information matches your
wireless network.
b.
Verify connectivity to the Internet or network resources.
Note: If you are unable to connect, see the troubleshooting tips in the
Basic Installation section of the Reference Manual on the 108 Mbps
Wireless PCI Adapter Resource CD.
WG311T install guideƒ.r1
12/18/03
2:30 PM
Page 4
Windows 2000, Me/98SE Basic Installation
1 a.
First, install the WG311T software
b.
configure your WG311T
3 Now,
a. Open the WG311T Smart Wireless Settings Utility by clicking
Power on your desktop PC and log into the Windows
Operating System.
Insert the 108 Mbps Wireless PCI Adapter Resource CD for the
WG311T into your CD-ROM drive. The CD main page shown
below will load.
b.
on the icon
the Windows system tray. The utility opens to
the Settings page.
PLEASE REFER TO THE SUPPORT INFORMATION CARD
THAT SHIPPED WITH YOUR PRODUCT.
Change the Network
Name SSID to match
your network.
By registering your product at www.NETGEAR.com/register, we can
provide you with faster expert technical support and timely notices of
product and software upgrades.
Tip: As an alternative to
typing in the SSID, you
can use the Network tab
to view the available
wireless networks, and
double click on the
desired network.
c.
Click the Install Driver & Utility link.
d.
Follow the InstallShield Wizard steps, and click Finish when done.
If prompted to Restart the computer, choose Shut Down.
install the WG311T Wireless PCI Adapter
2 Next,
a. Shut down the PC and remove its power cord. Insert the
WG311T Wireless PCI Adapter into an available PCI slot.
Reconnect the power cord and reboot the computer.
b.
c.
Click Apply to activate the connection.
d.
You can also enter a profile name and click on the Save Profile
button to store current settings.
Note: If a Windows 2000 displays a Digital Signature Not
Found warning, click Yes to continue the installation.
a.
Verify that your connection information matches your
wireless network.
When the installation is complete, you will see the WG311T system
tray icon
on the lower right portion of the Windows task bar.
b.
Verify connectivity to the Internet or network resources.
December 2003
Support Information
Phone: 1-888-NETGEAR (For US & Canada only) - 24 x 7 phone support
See Support information card for other countries.
E-mail: support@NETGEAR.com (24 x 7 online support)
www.NETGEAR.com
4 Finally, verify wireless network connectivity
Note: You can also use the Networks tab to verify the availability of
wireless networks and their SSIDs. Please see the Reference Manual on
the 108 Mbps Wireless PCI Adapter Resource CD.
2 0 1 - 1 0 0 6 6 - 0 2
NETGEAR, INC.
Note: The status bar at the bottom of the utility reports the speed of
your connection. 108 Mbps speed is only possible when your wireless
network has a 108 Mbps access point such as in the NETGEAR
WGT624 108 Mbps Wireless Firewall Router.
After a short delay, the Found New Hardware Wizard displays.
*201-10066-02*
Technical Support
Note: If you are unable to connect, see troubleshooting tips in
the Basic Installation section of the Reference Manual on the
108 Mbps Wireless PCI Adapter Resource CD.
0560 !
Attention: This device may be used throughout the
European community. Some restrictions may apply
in France and Italy.
©2003 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy, Everybody's
connecting, and Auto Uplink are trademarks or registered trademarks of Netgear in the
United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holder. Information is subject to change without
notice. All rights reserved.
Canada (IC) Warning Notice :
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
Netgear Inc. declares that WG311T (FCC ID: PY3WG311T2)
is limited in CH1~CH11 by specified firmware controlled in U.S.A.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2003:12:18 14:30:33Z
Modify Date                     : 2004:06:04 16:43:25+08:00
Page Count                      : 4
Creation Date                   : 2003:12:18 14:30:33Z
Producer                        : Acrobat Distiller 4.0 for Macintosh
Author                          : Rich
Mod Date                        : 2004:06:04 16:43:25+08:00
Metadata Date                   : 2004:06:04 16:43:25+08:00
Creator                         : Rich
Title                           : WG311T install guideÄ.r1
Has XFA                         : No

EXIF Metadata provided by EXIF.tools