Newcont Electronic 35135 900MHz Cordless Telephone User Manual 6210

Download:
Mirror Download [FCC.gov]
Document ID	359486
Application ID	JchXf6L/eQX3jaP/T/ZeeQ==
Document Description	users manual page 14 to 20
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	124.03kB (1550420 bits)
Date Submitted	2003-09-23 00:00:00
Date Available	2003-09-23 00:00:00
Creation Date	2003-09-23 18:53:06
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2003-09-23 18:53:42
Document Title	6210
Document Creator	CorelDRAW Version 9.397
Document Author:	your name

Getting Started
Caller ID System Operation
A. LANGUAGE
This telephone offers English, Spanish and French languages for your convenience.
HANDSET
1. Press the
FUNC /MAIL
button and hold down.
2. Press the TELEPHONE KEYPAD
3. Press the
LDCCF
AM
PM
R/P
Press the TALK button to confirm that
you have a dial tone. If you do not get a
dial tone, review steps 3 through 12. If
you still do not have a dial tone, refer to
the Problem Solving section on page 30.
CALLS BATT MSG DIR
MIN
NEW
TALK
SEC RPT
TOTAL
DIR
BELT CLIP HOOK
EDIT /FLASH
button.
button.
4. Press the SCROLL UP
or DOWN
French.English is the preset language.
5. Press and hold down the
6. Press the
FUNC /MAIL
R/P / SAVE
button to select English, Spanish, or
button.
button to return to STANDBY mode.
B. FIRST RING ON/OFF
This telephone will generate the first ring sound even in the BLOCKED CALL mode to
indicate that you have an incoming call. To keep silent in the BLOCKED CALL mode,
you can turn off the first ring sound.
OPER
1. Press the
HANDSET
FUNC /MAIL
button and hold down.
2. Press the TELEPHONE KEYPAD
3. Press the
With the back of the HANDSET facing up, insert
one side of the BELT CLIP HOOK into the
matching slot at the top side of the HANDSET.
Press down on the opposite side of the BELT
CLIP until the other hook locks Into the slot on
the side of the HANDSET.
EDIT /FLASH
button.
button.
4. Press the SCROLL UP
or DOWN
button to select the SILENT ON/OFF
setting. SILENT OFF is the preset mode.
5. Press and hold down the
6. Press the
FUNC /MAIL
R/P / SAVE
button and hold down.
button to return STANDBY mode.
C. TIME SET
13. Set the date and time.
You are now ready to use your new
NEWCONT Cordless Telephone
Set the date and time
1. Press the FUNC /MAIL button hold down..
2. Press the TELEPHONE KEYPAD
3. Press the
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
EDIT /FLASH
button.
button.
4. Press the SCROLL UP
or DOWN
to enter the month, date, hour and
minute. To move cursor, press SHIFT LEFT
or RIGHT
5. Press and hold down the
R/P / SAVE
button.
20
Caller ID System Operation
Cordless Telephone Operation
Function Operation
Preparing for Use
This unit contains the following special functions:
Before you can use cordless telephone ,you must charge the HANDSET for 12
hours. Failure to do so will require recharging of the BATTERY PACK more often.
(See page 26 for more information on the BATTERY PACK)
A. LANGUAGE
F. AREA CODE
B. FIRST RING ON/OFF
G. FLASH TIME
C. TIME SET
H. PAUSE TIME
D. RINGER VOLUME
I. VOICE MAIL
E. LCD CONTRAST
J. MSG WAITING
To access, press the
FUNC /MAIL
NOTE:
Depending on the frequency of use, once the HANDSET is fully charged , it remains
functional for approximately 4 hours of continuous use and approximately three days
when the HANDSET is off the BASE UNIT in STANDBY mode.
button and hold down while in STANDBY mode,
then press the TELEPHONE KEYPAD
DOWN
1. Place the HANDSET on the BASE UNIT for 12 hours .
2. After 12 hours ,remove the HANDSET from the BASE UNIT.
3. Raise or reposition the BASE UNIT ANTENNA for the best reception.
buttons or the SCROLL
OPER
button.
Receiving calls
AM
TORAL
KEYPAD
Button
AM
TORAL
KEYPAD
Button
AM
KEYPAD
AM
AM
KEYPAD
AM
KEYPAD
TORAL
Button
TORAL
Button
AM
Button
TORAL
KEYPAD
Button
AM
TORAL
AM
TORAL
KEYPAD
KEYPAD
Button
KEYPAD
TORAL
Button
TORAL
1. When the phone rings, lift the HANDSET and
press the TALK button. The HANDSET LCD
Screen will display "CALLS" and "TALK",and
the BASE UNIT IN USE LED indicator will
light up.
2. Start your conversation
3. To end your conversation, either press the
TALK button or place the HANDSET on the
BASE UNIT. If you place the HANDSET on the
BASE UNIT CHARGE CRADLE, you activate
the automatic STANDBY feature.
AM
CALL
RPT
TALK
NOTES:
1. The Call Timer will start to count once you press the TALK button.
2. The LCD Screen emits light for 8 seconds every time you press any of the
TELEPHONE KEYPAD buttons.
When "CALLS"appears on the LCD Screen,
it means the HANDSET IS OFF-HOOK
(connected to the telephone line).
Button
CALLS
Minutes
AM
AM
TORAL
Seconds or Channel (Press the scan/del
button to display the channel).
TORAL
Call Timer Display
KEYPAD
OPER
19
Button
Caller ID System Operation
Cordless Telephone Operation
Deleting All Records in the PHONE BOOK
Placing Calls
1. Press the TALK button, the Call Timer
starts to count. The HANDSET LCD Screen
will display "CALLS " and "TALK ", and the
BASE UNIT IN USE LED indicator will light
up.
1. Press the DIR button to enter the phone book list. (If the phone book is not full, the
LCD screen will disply "NEWDATA", press scroll UP or DOWN to enter the phone
book list)
2. Press and hold down the
DEL /SCAN
, the LCD screen will display "ERASE ALL"
2. Listen for a dial tone.
LDCCF
CALLS BATT MSG DIR
AM
TOTAL
3. Dial the phone number.
AM
PM
4. when you have finished your call, press the
TALK button again or place the HANDSET
on the BASE UNIT.
R/P
MIN
NEW
TALK
SEC RPT
TOTAL
DIR
3. Press DEL /SCAN again, the LCD Screen will display "ALL ERASED",and then
return to the idle display.
Selective Deleting in the PHONE BOOK
1. Press the
NOTE: You can pre-Dial the phone number
before you press the TALK button. The number
displayed will be dialed once TALK is pressed.
DIR
button.
2. Press the SCROLL UP
OPER
3. Press
DEL /SCAN
or DOWN
button to find the record you want to delete.
button, the LCD Screen will display the "ERASE ITEM"
TOTAL
4. The record will be deleted if you press
will display the next record.
5. Press the
DIR
DEL /SCAN
button again, and the LCD Screen
button to return to STANDBY mode.
18
Caller ID System Operation
Cordless Telephone Operation
Placing Calls from the PHONE BOOK
Using the Headset Feature
1. Press the
Your telephone can utilize a headset (not
included) to be connected to your HANDSET
for you to enjoy hands-free communication.
Insert the small plug at the end of the headset
into the HEADSET JACK at the right side of
the HANDSET. Follow the procedures
discussed in "Receiving Calls "and" Placing
Calls" to receive and place a call.
DIR
button.
2. Press the SCROLL UP
or DOWN
button to find the record you want to call.
3. Press the FUNC /MAIL button to change the format of the displayed number.
Available formats Include:
Number of digits
Explanation
Eleven digits
Long distance code "1"
+3 - digit area cod
+7 - digit telephone number.
Ten digits
3-digit area code+
7-digit telephone number.
Seven digits
7-digit telephone number.
Example
566-327-4466
1-566-327-4466
NOTE: When you plug the headset plug into
the HEADSET JACK it automatically
mutes the MICROPHONE and
SPEAKER of the HANDSET. Unplug
the headset to return the HANDSET
to normal use.
HEADSET
MICROPHONE
SPEAKER
HEADSET
PLUG(2.5mm)
HEADSET JACK
327-4466
Redial Feature
4. Press the TALK button to dial the number displayed in the screen.
5. To end your conversation, either press the TALK button or place the HANDSET
on the BASEUNIT.
1. If you get a busy tone, press the TALK button
or place the HANDSET on the BASE UNIT to
hang up.
NOTE: If the phone company does not supply all ten digits of an incoming caller, you
will not be allowed to adjust the format of that number.
2. Later, press the TALK button again.
TALK
3. Listen for a dial tone.
4. Press the R/P / SAVE button, this will automatically
redial the last telephone number you called.
5. When you have finished with your call, press
the TALK button again or place the
HANDSET on the BASE UNIT.
NOTE:
If you are too far away from the BASE UNIT, the HANDSET emits "beep"sounds to warn
you that the Background noise level is too high for proper communication between the
HANDSET and the BASE UNIT. When you hear this sound, you should move closer to
the BASE UNIT to reduce the noise level. Otherwise, the call will automatically cut off.
17
10
Caller ID System Operation
Caller ID System Operation
Caller ID System
This telephone automatically displays an incoming caller's name and telephone number
together with the date and time of the call. It records up to 80 calls and stores the data in
Memory.
IMPORTANT: You must subscribe to the Caller ID service from your local telephone
company to utilize this feature.
Editing the Name and Number in the PHONE BOOK
1. press the
DIR
button.
2. Press the SCROLL UP
or DOWN
button to find the record you want to edit.
Viewing Caller Information During Incoming Calls
1. When there is an incoming call, the name and the telephone number of the caller will
automatically appear after the first ring. Press the SHIFT RIGHT
button to view
a name of more than 11 digits.
TOTAL
3. Press the
Time
OR
Month/Date
AM
NEW
EDIT
/FLASH button to edit the name.
NEW
AM
Number of calls recorded
cursor is blinking
TOTAL
Caller's telephone number will appear if the caller's name is not available
4. Press the SHIFT LEFT
or RIGHT
button to move the cursor to the letter you
want to change. To add, use the TELEPHONE KEYPAD OPER
buttons.
(See page 26 for details.)To erase, press the DEL /SCAN button.
e.g
OR
"OUT OF AREA "will appear if the origin
of the incoming call does not support the
Caller ID system.
AM
TOTAL
5. Press the SCROLL UP
OR
"PRIVATE"and/or "P-- -- --"will appear if the caller's name and/or telephone
number is blocked.
OR
or DOWN
button to edit the number.
6. Press the SHIFT LEFT
or RIGHT
button to move the cursor to the number
you want to change. To add, use the TELEPHONE KEYPAD OPER
buttons. See page 24 for details.)To erase, press the DEL /SCAN button.
"DATA ERROR"will appear if the wrong data was received from the telephone line.
OR
The name stored in memory will appear for an incoming call with matching
telephone numbers.
"MSG WAITING" (Message Waiting)
The MSG WAITING GREEN LED indicator will blink when there is a message for
you from your telephone Company if you have subscribed to Voice Mail message
service and if you have requested Visual Message Indication from your local
telephone company. "MSG"will appear on the LCD Screen in STANDBY mode .(To
remove the MESSAGE WAITING indicator, see page 25 for detail)
TOTAL
cursor is blinking
on the number
7. Press and hold down the R/P / SAVE button to confirm.
IMPORTANT: It is not advisable to save a telephone number without the corresponding
name in the PHONE BOOK.This will lead to improper displays on Private
and Out of Area calls.
NOTE: When no active buttons are pressed for 20 seconds, the LCD Screen will
automatically return to STANDBY mode.
11
16
Caller ID System Operation
Caller ID System Operation
Speed Viewing the PHONE BOOK
Call Waiting
1. Press the
When you subscribe to a Call Waiting service from your local telephone company, this
telephone will display the name and number of the second caller while you are having
a phone conversation with your first caller.
1. When you are having a conversation ,this tele- e.g.
phone will automatically display the name and
number of the second caller. The name will be
blinking.
2. Press the EDIT /FLASH button to answer the
1st caller
second caller .The first caller's name.
and number will be displayed. The name will be e.g.
blinking.
3. When you have finished ,press the EDIT /FLASH
button to continue with your conversation with
the first caller.
2nd caller
DIR
button.
2. Enter the first letter of a name. (See page 26 detail of entering a letter ).
3. Press the SCROLL UP
letter.
4. Press the SCROLL DOWN
button to find all names with the same first
button to find next name in the phone book.
Saving in the PHONE BOOK
1. Press the DIR button. The LCD screen will display "PHONE BOOK".(a record will be
displayed if the phone book is full, the phone book can story up to 64 records)
2. Press the
EDIT /FLASH
button to enter new record.
3. Use the TELEPHONE KEYPAD
buttons to enter the name (see
page 26 for detail ), the cursor will a second, and you can store up to 16 characters.
4. Press the SCROLL DOWN
NEW
AM
button once.
5. Enter the telephone number by using the TELEPHONE KEYPAD
buttons. You can store up to 16 digits.
OPER
AM
NEW
If you do not want to interrupt your phone conversation with the first caller, you can
advise the second caller to leave a Voice Mail message instead.
Voice Mail Function
When there is a Voice Mail message for you, the "MSG"icon on the LCD Screen and the
MESSAGE WAITING LED indicator will blink.
1.To access your Voice Mail message, press the TALK button.
2. After you hear a dial tone, press the FUNC /MAIL button. This will automatically
dial the Voice Mail Post Code in your area and connect you to the Voice Mail service
provider.
6. Press and hold down the R/P / SAVE button.
7. Press the DIR button to return to STANDBY mode. (If no active button are pressed
for 20 seconds, the LCD Screen will automatically return to STANDBY mode.)
NOTE: You should store the Voice mail Post Code number by using the Voice Mail
function on page 23.You can also call your Voice Mail service provider by
dialing the Voice Mail Post Code number after pressing the TALK button,
NOTE: It will not save a duplicate telephone number or a name without the corresponding
telephone number in the PHONE BOOK.
"C-F"(Forwarded Call)
PREFERRED CALLS
"L-D-C" (Long Distance Call)
You can assign PREFERRED CALL which will generate a special ringer sound at the
start of the second Ring to any welcome caller in the PHONE BOOK. When you are
saving the name and number into the PHONE BOOK, add a mark at the beginning
of the name by pressing the TELEPHONE KEYPAD
button.
BLOCKED CALLS
You can assign a BLOCKED CALL which will disable the ringer sound from the second
ring to any caller in the PHONE BOOK. When you are saving the name and number
into the PHONE BOOK, add an mark at the beginning of the name by pressing the
TELEPHONE KEYPAD
button.
Appear on the upper left hand side, when the incoming call has been assigned to your
telephone number.
Appears on the upper left hand side, when the incoming call is a long distance call and
the service is provided by your local telephone company.
Caller List
Records call information for up to 80 incoming calls such as caller's name and
telephone number together with the date and time of the call .After recording a new
incoming call, the NEW CALL indicator will blink and the LCD Screen will look as
shown below:
No. of new calls.
Maximum calls=80
AM
NEW
15
TOTAL
12
Caller ID System Operation
Caller ID System Operation
Viewing the Caller List
1. Press the SCROLL DOWN
button to view the latest Caller ID record, or press
the SCROLL UP
button to view the first Caller ID record, press the SHIFT
RIGHT
button if the name has more than 11digits.
Deleting All Records in the Caller List
1. Press and hold down the DEL /SCAN button
while in the caller list, and display "ERASE ALL"
2. Press DEL /SCAN button again to delete all records,
the display "NO CALL"
AM
AM
NEW
NEW
2. Press the DIR button to go back to STANDBY mode. (If no active buttons are
pressed for 20 seconds or you have viewed the last Caller ID record in the Caller's
List, the LCD Screen will automatically return to STANDBY mode.)
Placing a Call from the Caller List
1. Press the SCROLL DOWN
button to select from the first Caller ID record, or
press the SCROLL UP
button to select from the first Caller ID record.
2. Press
FUNC /MAIL
button to select the correct format. (7 digits, 10digits, 11digits)
3. Press TALK button to dial the number.
4.To end your conversation, either press the TALK button or place the HANDSET on
the BASE UNIT.
AM
NEW
TOTAL
3. Press DIR button to return to STANDBY mode. (If no active button are pressed for
20 seconds, the LCD screen will automatically return to STANDBY mode)
Selective Deleting in the Caller List
1. Press the SCROLL UP
or DOWN
button to
find the Caller ID record while in STANDBY mode.
2. Press DEL /SCAN button, the LCD Screen will
display "ERASE ITEM".
AM
3. Press the DEL /SCAN again, the LCD Screen will
display the next Caller ID record in the Caller List.
4. Press the
DIR
button to return to STANDBY mode.
PHONE BOOK
Saving the Name and Number in the Caller List into the
PHONE BOOK
This DIRECTORY lets you scroll through the list to find the record you need for one
touch dialing .You can Store up to 64 names and telephone numbers in the Memory.
1. Press the SCROLL UP
or DOWN
button to find the caller.
2. Press and hold down the R/P / SAVE button.
Viewing the PHONE BOOK
1. Press the
DIR
button
NOTE: It is not advisable to save a telephone number without the corresponding name.
This will lead To improper display on Private and Out of Area calls.
TOTAL
AM
2. Press the SCROLL
the SHIFT RIGHT
AM
No. of records stored
UP or DOWN
button to find the one you need, press
button if the name or telephone number is more than 11digits.
AM
NEW
NEW
NOTE: To exit the PHONE BOOK List at anytime, press the
13
14
DIR
button.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:09:23 18:53:42-06:00
Create Date                     : 2003:09:23 18:53:06-06:00
Title                           : 6210
Author                          : your name
Creator                         : CorelDRAW Version 9.397
Producer                        : Corel PDF Engine Version 9.397
Page Count                      : 7
Mod Date                        : 2003:09:23 18:53:42-06:00
Creation Date                   : 2003:09:23 18:53:06-06:00
Metadata Date                   : 2003:09:23 18:53:42-06:00

EXIF Metadata provided by EXIF.tools