Ngai Lik Electronics MIP669A Wireless Speaker User Manual

Ngai Lik Electronics Enterprises Limited Wireless Speaker

Manual

iLive2WARNING: Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.WARNING: Shock hazard - Do Not Open.AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIRMains Plug or Direct plug-in adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the Mains Plug or Direct plug-in adapter should be disconnected from the mains socket outlet completely.La che d’alimentation ou adaptateur de courant est utilisé comme dispositif de déconnexion et doit rester accessible pendant l’utilisation. Pour mettre l’appareil hors tension, la che ou adaptateur de courant doit être débranché de la prise de courant.Do not mix old and new batteries.Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.No mezcle baterías viejas y nuevas.No mezcle baterías alcalinas, estándar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.).CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.CAUTION: Use of any controls or adjustments or performance of procedures other than those herein specied may result in hazardous radiation exposure.WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface.WARNING: Use of this unit near uorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any uorescent lighting, as it may be the cause.CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent.WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.WARNING: The battery, batteries, and battery pack shall not be exposed to excessive heat such as sunshine, re, or the like. 7KHOLJKWQLQJÀDVKZLWKDUURZKHDGV\PEROZLWKLQDQHTXLODWHUDOWULDQJOHLVLQWHQGHGWRDOHUWWKHXVHUWRWKHSUHVHQFHRIXQLQVXODWHGGDQJHURXVYROWDJHZLWKLQWKHSURGXFWVHQFORVXUHWKDWPD\EHRIVXI¿FLHQWPDJQLWXGHWRFRQVWLWXWHDULVNRIHOHFWULFVKRFNWRSHUVRQVWARNING: TO REDUCE THE RISK OF (/(&75,&6+2&.'21275(029(&29(525%$&.1286(56(59,&($%/(3$576,16,'(5()(56(59,&,1*7248$/,),('6(59,&(3(56211(/0CC4=C8>=A8B@D43q;42CA>2DC8>==4?0B>DEA8A20DC8>=A8B:>54;42CA82B7>2:3>=>C>?4=7KHH[FODPDWLRQSRLQWZLWKLQDQHTXLODWHUDOWULDQJOHLVLQWHQGHGWRDOHUWWKHXVHUWRWKHSUHVHQFHRILPSRUWDQWRSHUDWLQJDQGPDLQWHQDQFHVHUYLFLQJLQVWUXFWLRQVLQWKHOLWHUDWXUHDFFRPSDQ\LQJWKHDSSOLDQFHWarnings and Precautions
Important Safety Instructions 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. FCC Warnings WARNING approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operationg in conjunction with any other antenna or transmitter Additional Warnings 11. Only use attachments/accessories specified by the manufacturer. The apparatus shall not be exposed to dripping or Splashing and that no objects filled with liquids,such as vases, shall be placed on apparatus. 12. Use only with a cart, stand, tripod, Bracket,or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet. Battery shall not be exposed to excessive heat such as Sunshine,fire or the like. Les piles ne doivent pas être exposées à de forte chaleur, 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Special note: When placing your unit on a lacquered or Natural finish,protect your furniture with a cloth or other protective material. tel qu’à la lumière du soleil, au feu ou autres choses de semblable. Caution marking is located at the rear or back of the apparatus. Attention marquage est situé à l’arrière ou à l’arrière de l’appareil The marking information is located at the rear or back of apparatus. Les informations de marquage est situé à l’arrière ou à l’arrière de l’appareil. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. Customer Support: 1-888-999-4215 iLive 3
Sound Bar with Wireless Subwoofer for Any TV×Made for iPod and iPhone×Plays and charges docked iPod and iPhone×App-enhanced×FM radio (PLL)×Station memory presets (20 FM)×High power amplier×BBE® professional-grade sound technology×Enhanced audio quality×iPod and iPhone controls×iPod and iPhone authentication IC×Composite video input×Composite video output×Component video output×SubWoofer output×2 RCA stereo audio inputs×3.5mm audio input×Preset EQ×Bass controls×Treble controls×Digital volume control×Last user settings memory×Wall mountable×Full-function remote×Cloth speaker grill×Negative LCD display×Digital clock×Timer×Sleep Timer×AC power: built-in AC power cable×2.4Ghz wireless receiver×Subwoofer input×Volume control×Pairing button×Wooden speaker enclosure×Cloth speaker grill×AC power: built-in AC power cable×Remote control: requires 2 AAA batteries (included)×RCA video cable×Wall-mount hardware: 1 wall mount bracket, 2 screws, 2 wall anchors×FM wire antennaSound Bar - FeaturesWireless Subwoofer - Features IncludedSetupAC power: built-in AC power cable Requires 2 AAA batteries (included)THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND DHHSSTANDARDS 21 CFR SUBCHAPTER J. AT DATE OF MANUFACTURED.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Sound Bar and Wireless Subwoofer - Power RemoteiLive4
Customer Support: 1-888-999-4215 iLive 5Table of ContentsWarnings and Precautions ............................................................................ 2Important Safety Instructions ......................................................................... 3Sound Bar with Wireless Subwoofer for Any TV......................................................... 4Setup ................................................................................................ 4Table of Contents..................................................................................... 5Introduction ......................................................................................... 6iPod and iPhone...................................................................................... 8App ................................................................................................. 9FM Radio, Clock, Sleep Timer, and Timer ..............................................................10Wireless Subwoofer Setup ...........................................................................11Basic Connectivity...................................................................................12Video and Audio Inputs/Outputs .....................................................................13 BBE Professional Audio Modes.......................................................................14Mounting to a Wall ..................................................................................15Company Information ...............................................................................16
IntroductionPowerPress to power the sound bar o and on.SourcePress to switch between FM, iPod, Aux, AV, and Line modes.VolumePress to adjust the volume.PairingPress to pair the sound bar with a wireless subwoofer.3.5mm Audio Input (Line)ResetPress using a paperclip or like object to reset the sound bar to it’s original settings.Stability LeverSoft Touch Dock for iPod and iPhonePower/Pairing IndicatorPairingPress to pair the wireless subwoofer to the sound bar.Wireless/Sub-InAdjust to switch between wireless input and the Subwoofer Input.POWERSOURCEVOLUMEPAIRINGLINE INSubwoofer OutputComposite Video OutputComponent Video OutputComposite Video Input (AV)RCA Stereo Audio Input (Aux)RCA Stereo Audio Input (AV)Bass LevelTurn to adjust the bass output on the wireless subwoofer.Subwoofer InputPowerPress to power the wireless subwoofer o or on.iLive6
Customer Support: 1-888-999-4215 iLive 7SOURCEVIDEO SLEEPEQDISPLAYVOLUMEMENUMUTESHUFFLEREPEATMO/STMEMORYLIVECLOCKTIMERMOVIEUSER TREBLE BASSMUSICBBELEVELTUNINGTUNINGEQPress to switch between Rock, Pop, Classic, Jazz, and Flat preset equalizer modes.PowerPress to power the sound bar o and on.Treble and BassPress and use the levels buttons to adjust the treble or bass.UserPress to set custom treble and bass levels.MemoryPress to save the current radio station to a preset channel.MO/STPress to switch between Mono and Stereo FM radio modes.Album, Chapter, and PlaylistPress to adjust the current album, chapter, or playlist on a docked iPod or iPhone.DisplayPress to view the time on the display.Menu ( )Press to move up and down through menus on an iPod or the iPod app on an iPhone.Skip/Search ( )Press to skip between tracks or press and hold to search through the current track on a docked iPod or iPhone.LevelIn user mode, press to adjust the treble and bass.SourcePress to switch between FM, iPod, Aux, AV, and Line modes.MutePress to mute the volume.TimerWith the power o, press to set a timer to turn the sound bar on to iPod or FM mode at a specied time. With the power o, press and hold to activate or deactivate the set timer.ClockWith the power o, press to set the clock.SleepPress repeatedly to set a sleep timer to turn the sound bar o after a set amount of time has passed.VideoIn iPod mode, press to switch between Component Video Output and Composite Video Output.RepeatPress to set the repeat options on a docked iPod or iPhone.ShuePress to set the shue options on a docked iPod or iPhone.MenuPress to switch between menus on a docked iPod or the iPod app on an iPhone.Select ( )Press to make selections on a docked iPod or the iPod app on a docked iPhone.VolumePress to adjust the volume.BBE Live, Music, and MoviePress to switch to the BBE Live, Music, and Movie audio modes.Play/PausePress to play or pause a docked iPod or iPhone.
iLive8iPod and iPhone1. Press the top right corner of the Soft Eject iPod Door to access the Dock for iPod and iPhone.2. Swing the Stability Lever down to stabilize the sound bar while docking an iPhone or iPod.3. Connect your iPod or iPhone to the connector inside the Dock for iPod and iPhone.When the sound bar is plugged in, using AC power, the docked iPod or iPhone will charge.1. Follow the instructions for Docking an iPod or iPhone.2. Press the Power button to turn the sound bar on.3. Press the Source button to switch to iPod mode.4. Press the Play/Pause button to begin playing music from the docked iPhone or iPod.Docking an iPod or iPhonePlaying a Docked iPod or iPhoneStability Lever
Customer Support: 1-888-999-4215iLive9App1.Go to the App Store on your iPhone, iPod touch, or on iTunes.2.Search for ITPW891B.3.Download the App.When downloading directly from iTunes, sync the app to your iPod or iPhone from iTunes. 1.Follow the instructions for Docking an iPod or iPhoneg.2.Once the iPod or iPhone is docked a screen will appear prompting you to download the ITPW891B app from the App Store.3.Press Yes to automatically download the ITPW891B app.Manually Downloading the App Automatically Downloading the AppCLOCK & CALENDARThe clock and calendar will automatically sync with the time on the iPod or iPhone, so there’s no need to set it.ALARMAdd as many alarms as you like using the settings menu. You can set them to wake to iPod music or Nature Sounds.WEATHERType in your location and view your current weatherconditions along with the time on the home page of the app.PHOTO SLIDE SHOWSelect photos that are already on your iPod or iPhone and play a slideshow with your music in thebackground.FM RADIOWhile docked on the bar speaker, use the ITPW891B to tune the FM radio and save FM radio station as presets.SOURCESWhen docked with the bar speaker you can use the ITPW891B to switch between FM Radio, iPod, and Line Input modes. ITPW891B Features
iLive101. Press the Power button to turn the power o.2. Press the Clock button on the remote.The hour on the display will begin blinking.3. Press the Skip/Search buttons on the remote to adjust the hour.4. Press the Clock button.The minute on the display will begin blinking.5. Press the Skip/Search buttons on the remote to adjust the minute.6. Press the Clock button to nish setting the clock.1. Press the Power button to turn the power on.2. Press the Sleep button repeatedly to set the sleep timer.3. After the set sleep time has expired, the sound bar will automatically power o.Set the sleep time to “00” to turn the sleep timer o.1. Press the Power button to turn the power o.2. Press the Timer button on the remote.The hour on the display will begin blinking.3. Press the Skip/Search buttons on the remote to adjust the hour.4. Press the Timer button.The minute on the display will begin blinking.5. Press the Skip/Search buttons on the remote to adjust the minute.The source on the display will begin blinking.6. Press the Skip/Search buttons on the remote to switch between iPod and FM modes.7. Press the Timer button to nish setting the timer.After the set time is reached, the sound bar will automatically power on to the set source.1. Press the Power button to turn the power o.2. Press and hold the Timer button to activate or deactivate the timer.The letter “T” will appear on the display when the timer is activated.Setting the ClockSetting the Sleep TimerSetting the TimerActivating the TimerFM Radio, Clock, Sleep Timer, and TimerAdjust the built-in FM wire antenna to improve FM radio reception.1. Press the Power button to turn the sound bar on.2. Press the Source button to switch to FM radio mode.3. Press the Tuning buttons on the remote to tune the FM radio.1. Press the Power button to turn the sound bar on.2. Press the Source button to switch to FM radio mode.3. Press the Menu ( ) buttons on the remote to cycle through saved radio stations.1. Follow the instructions for Tuning the FM Radio.2. After tuning to the desired station, press the Memory button on the remote.3. Press the Menu ( ) buttons on the remote to select a preset channel.4. Press the Memory button to save the current radio station to the selected preset.Up to 20 stations can be saved to the sound bar’s memory.FM AntennaTuning the FM RadioListening to a Saved Radio StationSaving a Radio Station
Customer Support: 1-888-999-4215 iLive 11Wireless Subwoofer SetupWhile the wireless subwoofer was paired at the factory to allow for immediate operation, it will occasionally become un-paired in transit. Un-pairing can also occur in day-to-day operation due to dierent environmental inuences. This is normal. Should this occur, please follow the pairing instructions below.1. Plug the sound bar into a power source and press the Power button to power the sound bar on.2. Plug the wireless subwoofer into a power source and press the Power switch to power the wireless subwoofer on.3. Press and hold the Pairing button on the wireless subwoofer until the Power/Pairing Indicator begins to blink.4. While the Power/Pairing Indicator on the wireless subwoofer is blinking, press and hold the Pairing button on the sound bar.The Power/Pairing Indicator will remain lit once the sound bar and wireless subwoofer has been paired. After pairing, the wireless subwoofer may take up to 30 seconds to begin playing audio from the sound bar.Pairing allows the sound bar to recognize a wireless subwoofer. Once a wireless subwoofer is paired, the sound bar will transmit audio to it.t Once paired, the wireless speaker can be moved up to 200ft (line-of-site) or up to 90ft (indoors) depending on environmental conditions. Should the sound drop or become garbled it will be necessary to move the wireless subwoofer to another location in order to receive the signal clearly.Important Note Pairing the Wireless SubwooferWhat does it mean to pair?Additional InformationLink Indicator System StatusOFF Powered oSLOW FLASHES Standby modeQUICK FLASHES Attempting to pairSOLID LIGHT Paired and playing
iLive12DVD PLAYERDIGITAL CABLE or SATELLITE TUNERVCRGAMING CONSOLEWIRELESSSUBWOOFERTELEVISIONWIRELESSAUDIOBasic ConnectivityThis is a basic ow chart of how you can connect your home entertainment devices to the sound bar, and in turn how the sound bar connects to them. For optimal performance, always connect video sources such as a DVD players, gaming consoles or set-top boxes directly to your television.
Customer Support: 1-888-999-4215 iLive 13Video and Audio Inputs/OutputsFor optimal performance, always connect video sources such as a DVD players, gaming consoles or set-top boxes directly to your television.1. Connect an RCA cable (included) to the Composite Video Input (AV) and a video source.2. Follow the instructions for Using a Composite Video Output.3. Follow the instructions for Using the RCA Audio Inputs (AV).4. Press the Power button to turn the sound bar on.5. Press the Source button to switch to AV mode.6. Use the native controls on the connected video device to control video that runs through the sound bar.1. Connect an RCA cable (included) to the Composite Video Output and a television.2. Adjust the connected television to the proper input setting.3. Press the Video button on the remote to switch between Composite and Component video output modes.4. Video from a docked iPhone/iPod can now be played through the bar speaker to the connected television.The Component Video Output will only output video from a docked iPod or iPhone. It cannot output video from the composite video input.1. Connect a component video cable (not included) to the Component Video Output and a television.2. Adjust the connected television to the proper input setting.3. Press the Video button on the remote to switch between Composite and Component video output modes.4. Video from a docked iPhone/iPod can now be played through the bar speaker to the connected television.Using the Composite Video Input (AV)Using the Composite Video OutputUsing the Component Video Output1. Connect a 3.5mm Audio Input cable (not included) to the 3.5mm Audio Input on the sound bar and an audio source.2. Press the Power button to turn the sound bar on.3. Press the Source button to switch to Line mode.4. Use the native controls on the connected audio device to begin playing music through the connected sound bar.1. Use an RCA cable (included) to connect an external subwoofer to the Subwoofer Output.2. When audio is played through any source, the sound bar will automatically use the connected subwoofer.1. Connect an RCA cable (included) to the RCA Audio Input (AV) on the sound bar and an audio source.2. Press the Power button to turn the sound bar on.3. Press the Source button to switch to AV mode.4. Use the native controls on the connected audio device to begin playing music through the connected sound bar.1. Connect an RCA cable (included) to the RCA Audio Input (Aux) on the sound bar and an audio source.2. Press the Power button to turn the sound bar on.3. Press the Source button to switch to Aux mode.4. Use the native controls on the connected audio device to begin playing music through the connected sound bar.Using the 3.5mm Audio InputUsing the Subwoofer OutputUsing the RCA Audio Input (AV)Using the RCA Audio Input (Aux)
iLive14 Professional Audio ModesYour favorite programming becomes more vibrant and engaging as BBE Live reveals all the detail and character of voices, ambient sounds and music -- even at low volume. Experience live sports and video games like you’ve never heard them before. Imagine hearing the crack of a bat, the shriek of a race car, the ricochet of gunre with BBE Live -- it’s like being there!Press the BBE Live, Music, and Movie buttons on the remote to switch between BBE Live, Music, and Movie audio modes.Imagine what it sounds like to be on stage or in the studio with your favorite musical artist -- hearing and feeling the raw emotion of vocals, the crunch of guitars, the impact of percussion. BBE music integrates the same professional, proprietary harmonic restoration technology used in renown concert halls and recording studios to restore lost details of compressed music -- for sound quality closer than ever before to the original performance.With BBE Movie, you’ll nally get audio quality that’s on par with today’s HD picture quality. From massive explosions to the faintest whisper, today’s 3D movies feature more complex soundelds than ever before. That’s why BBE Movie incorporates proprietary BBE HD-3D Sound technology to reveal more of the delth and space engineered into the audio mix. Whether it’s the latest blockbuster or a favorite classic, BBE Movie reveals sonic details you may never have heard before.LiveUsing BBE Professional Audio ModesMusicMovies
Customer Support: 1-888-999-4215iLive15Mounting to a WallWe recommend having this sound bar professionally mounted.1. Use the Tape Measure to decide how high you’d like to hang the sound bar on the wall.2.The sound bar must be hung within6 feet of an AC power outlet for the attached AC power cable to reach.3.Use the Stud Finder to locate 2 parallel wooden studs to screw the mounting brackets into.4.Mark the wall at the center of the studs using the Pencil.5. Line the Level up on both of your marks tomake sure they are level. If they’re not, adjust the marks as needed to make them level.6.After you’ve double checked your markings, drill the long screws through the hole on the mounting bracket directly into the marks you’ve made on the wall.If you are unable to mount the bracket directly into two studs, use the Wall Anchors to secure the bracket into drywall.7. Slide the sound bar onto the mounting bracket, and make sure there is a rm and stable connection before letting go of the sound bar.8. Finally, use the Level one last time to conrm that the sound bar is level.t Manual or Power ScrewdrivertStud Findert PenciltTape MeasuretLeveltWall mount brackett2 Long screws t2 Wall anchorsImportant NotesGetting StartedRequired ToolsIncluded HardwareSTUDSWALL16”FROM CENTER TO CENTERMOUNTING BRACKETPOWERSOURCEVOLUMEPAIRINGLINE INPOWERSOURCEVOLUMEPAIRINGLINE IN
Copyright © 2011 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without noticeTo download this User’s Guide in English, Spanish, or French, visit the support section at www.ilive.net.Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.ilive.net.Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.ilive.net.Phone:1-888-999-4215Email: customerservice@ilive.netParts Email: partsinfo@dpi-global.comWebsite: www.ilive.netInternational SupportContact InformationCompany Information

Navigation menu