Ngai Lik Electronics MIP669A Wireless Speaker User Manual
Ngai Lik Electronics Enterprises Limited Wireless Speaker
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1437724 |
| Application ID | P3jCEJ8NOD3ad0Xd1kj5bA== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 127.57kB (1594564 bits) |
| Date Submitted | 2011-03-25 00:00:00 |
| Date Available | 2011-03-25 00:00:00 |
| Creation Date | 2011-03-21 16:18:24 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2011-03-25 16:58:11 |
| Document Title | untitled |
Warnings and Precautions
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING: To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
WARNING: Lithium batteries, like all rechargeable batteries
are recyclable and should be recycled or disposed of in
normal household waste. Contact your local government
for disposal or recycling practices in your area. They should
never be incinerated since they might explode.
AVERTISSEMENT: Pour rĂŠduire le risque dâincendie ou de
choc ĂŠlectrique, ne pas exposer cet appareil sous la pluie et
lâhumiditĂŠ.
WARNING: Shock hazard - Do Not Open.
CAUTION: Use of any controls or adjustments or
performance of procedures other than those herein
specified may result in hazardous radiation exposure.
Mains Plug or Direct plug-in adapter is used as disconnect
device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the
mains completely, the Mains Plug or Direct plug-in adapter
should be disconnected from the mains socket outlet
completely.
WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the userâs authority to operate the equipment.
WARNING: Do not place the unit on top of any soft, porous,
or sensitive surfaces to avoid damaging the surface. Use a
protective barrier between the unit and surface to protect
the surface.
AVIS: RISQUE DE CHOC ĂLECTRIQUE - NE PAS OUVRIR
La fiche dâalimentation ou adaptateur de courant est utilisĂŠ
comme dispositif de dĂŠconnexion et doit rester accessible
pendant lâutilisation. Pour mettre lâappareil hors tension, la
fiche ou adaptateur de courant doit ĂŞtre dĂŠbranchĂŠ de la prise
de courant.
WARNING: Use of this unit near fluorescent lighting may
cause interference regarding use of the remote. If the unit is
displaying erratic behavior move away from any fluorescent
lighting, as it may be the cause.
Do not mix old and new batteries.
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
No mezcle baterĂas viejas y nuevas.
PRĂCAUTION: Danger dâexplosion si les piles sont remplacĂŠes
de façon incorrect. Remplacer les piles seulement par le même
type de pile ou lâĂŠquivalent.
WARNING: There is a danger of explosion if you attempt
to charge standard Alkaline batteries in the unit. Only use
rechargeable NiMH batteries.
WARNING: The battery, batteries, and battery pack shall
not be exposed to excessive heat such as sunshine, fire, or
the like.
Do not mix alkaline, standard (carbon-zinc), or rechargeable
(ni-cad, ni-mh, etc) batteries.
No mezcle baterĂas alcalinas, estĂĄndar (carbono-zinc) o
recargables (ni-cad, ni-mh, etc.).
20DC8>=
A8B:>54;42CA82B7>2:
3>=>C>?4=
0CC4=C8>=
A8B@D43q;42CA>2DC8>=
=4?0B>DEA8A
WARNING: TO REDUCE THE RISK OF
(/(&75,&6+2&.'21275(029(
&29(5 25%$&. 1286(5
6(59,&($%/(3$576,16,'(5()(5
6(59,&,1*7248$/,),('6(59,&(
3(56211(/
7KHOLJKWQLQJĂDVKZLWKDUURZKHDGV\PEROZLWKLQ
DQHTXLODWHUDOWULDQJOHLVLQWHQGHGWRDOHUWWKHXVHU
WRWKHSUHVHQFHRIXQLQVXODWHGGDQJHURXVYROWDJH
ZLWKLQWKHSURGXFW VHQFORVXUHWKDWPD\EHRI
VXIÂżFLHQWPDJQLWXGHWRFRQVWLWXWHDULVNRIHOHFWULF
VKRFNWRSHUVRQV
7KHH[FODPDWLRQSRLQWZLWKLQDQHTXLODWHUDOWULDQJOH
LVLQWHQGHGWRDOHUWWKHXVHUWRWKHSUHVHQFHRI
LPSRUWDQWRSHUDWLQJDQGPDLQWHQDQFH VHUYLFLQJ
LQVWUXFWLRQVLQWKHOLWHUDWXUHDFFRPSDQ\LQJWKH
DSSOLDQFH
iLive
Important Safety Instructions
1.
Read these Instructions.
FCC Warnings
2.
Keep these Instructions.
3.
Heed all Warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in
accordance with the manufacturerâs instructions.
8.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers)that produce heat.
9.
Do not defeat the safety purpose of the polarized or
grounding - type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
WARNING
approved by the party responsible for compliance could void the
userâs authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
consult an electrician for replacement of the obsolete
outlet.
10.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC RF radiation exposure limits set forth
an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body. This transmitter must not be colocated or operationg in conjunction with any other antenna or transmitter
Additional Warnings
11. Only use attachments/accessories specified by the
manufacturer.
12.
13.
Use only with a cart, stand, tripod,
Bracket,or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
Special note: When placing your unit on a lacquered or
Natural finish,protect your furniture with a cloth or other
protective material.
Customer Support: 1-888-999-4215
The apparatus shall not be exposed to dripping or
Splashing and that no objects filled with liquids,such as
vases, shall be placed on apparatus.
Lâappareil ne doit pas ĂŞtre exposĂŠ aux ĂŠcoulements ou aux
ĂŠclaboussures et aucun objet ne contenant de liquide, tel
quâun vase, ne doit ĂŞtre placĂŠ sur lâobjet.
Battery shall not be exposed to excessive heat such as
Sunshine,fire or the like.
Les piles ne doivent pas ĂŞtre exposĂŠes Ă de forte chaleur,
tel quâĂ la lumière du soleil, au feu ou autres choses de
semblable.
Caution marking is located at the rear or back of the apparatus.
Attention marquage est situĂŠ Ă lâarrière ou Ă lâarrière de lâappareil
The marking information is located at the rear or back of apparatus.
Les informations de marquage est situĂŠ Ă lâarrière ou Ă
lâarrière de lâappareil.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user
accessible parts.
iLive
Sound Bar with Wireless Subwoofer for Any TV
Sound Bar - Features
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Made for iPod and iPhone
Plays and charges docked iPod and iPhone
App-enhanced
FM radio (PLL)
Station memory presets (20 FM)
High power amplifier
BBEÂŽ professional-grade sound technology
Enhanced audio quality
iPod and iPhone controls
iPod and iPhone authentication IC
Composite video input
Composite video output
Component video output
SubWoofer output
2 RCA stereo audio inputs
3.5mm audio input
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Preset EQ
Bass controls
Treble controls
Digital volume control
Last user settings memory
Wall mountable
Full-function remote
Cloth speaker grill
Negative LCD display
Digital clock
Timer
Sleep Timer
AC power: built-in AC power cable
Wireless Subwoofer - Features
Included
Ă
Ă
Ă
Ă
Ă
Ă
Ă
Ă Remote control: requires 2 AAA batteries
(included)
Ă RCA video cable
Ă Wall-mount hardware: 1 wall mount bracket, 2
screws, 2 wall anchors
Ă FM wire antenna
2.4Ghz wireless receiver
Subwoofer input
Volume control
Pairing button
Wooden speaker enclosure
Cloth speaker grill
AC power: built-in AC power cable
Setup
Sound Bar and Wireless Subwoofer - Power
Remote
AC power: built-in AC power cable
Requires 2 AAA batteries (included)
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND DHHS
STANDARDS 21 CFR SUBCHAPTER J. AT DATE OF MANUFACTURED.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
iLive
Table of Contents
Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Sound Bar with Wireless Subwoofer for Any TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
iPod and iPhone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
FM Radio, Clock, Sleep Timer, and Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Wireless Subwoofer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Basic Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Video and Audio Inputs/Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
BBE Professional Audio Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Mounting to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Company Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Customer Support: 1-888-999-4215
iLive
Introduction
Power
Press to power the sound
bar off and on.
Source
Press to switch between FM,
iPod, Aux, AV, and Line modes.
Volume
Press to adjust the volume.
Composite
Video Input (AV)
Component
Video Output
Composite
Video Output
RCA Stereo
Audio Input (AV)
RCA Stereo
Audio Input
(Aux)
Subwoofer
Output
POWER
SOURCE
VOLUME
Pairing
Press to pair the sound bar
with a wireless subwoofer.
3.5mm Audio Input (Line)
Reset
Press using a paperclip or like
object to reset the sound bar
to itâs original settings.
PAIRING
LINE IN
Stability Lever
Soft Touch Dock for iPod and iPhone
Power/Pairing Indicator
Pairing
Press to pair the wireless
subwoofer to the sound bar.
Wireless/Sub-In
Adjust to switch between wireless
input and the Subwoofer Input.
iLive
Bass Level
Turn to adjust
the bass output
on the wireless
subwoofer.
Subwoofer
Input
Power
Press to power
the wireless
subwoofer
off or on.
BBE Live, Music, and Movie
Press to switch to the
BBE Live, Music, and
Movie audio modes.
EQ
Press to switch between Rock,
Pop, Classic, Jazz, and Flat
preset equalizer modes.
Mute
Press to mute the volume.
Power
Press to power the sound
bar off and on.
User
Press to set custom treble
and bass levels.
EQ
SOURCE
MUTE
LIVE
MUSIC
MOVIE
TIMER
USER
TREBLE
BASS
CLOCK
MEMORY
MO/ST
VIDEO
SLEEP
BBE
Treble and Bass
Press and use the levels buttons
to adjust the treble or bass.
REPEAT
Memory
Press to save the current radio
station to a preset channel.
SHUFFLE
MO/ST
Press to switch between Mono
and Stereo FM radio modes.
DISPLAY
MENU
Album, Chapter, and Playlist
Press to adjust the current
album, chapter, or playlist on
a docked iPod or iPhone.
TUNING
TUNING
Display
Press to view the time on the display.
Timer
With the power off, press to set a
timer to turn the sound bar on to
iPod or FM mode at a specified time.
With the power off, press and hold to
activate or deactivate the set timer.
Clock
With the power off, press
to set the clock.
Sleep
Press repeatedly to set a sleep timer
to turn the sound bar off after a
set amount of time has passed.
Video
In iPod mode, press to switch
between Component Video Output
and Composite Video Output.
Repeat
Press to set the repeat options
on a docked iPod or iPhone.
Shuffle
Press to set the shuffle options
on a docked iPod or iPhone.
Menu (
Press to move up and down
through menus on an iPod or
the iPod app on an iPhone.
Skip/Search (
Press to skip between tracks
or press and hold to search
through the current track on
a docked iPod or iPhone.
Source
Press to switch between FM,
iPod, Aux, AV, and Line modes.
LEVEL
VOLUME
Menu
Press to switch between
menus on a docked iPod or
the iPod app on an iPhone.
Select ( )
Press to make selections on
a docked iPod or the iPod
app on a docked iPhone.
Level
In user mode, press to adjust
the treble and bass.
Volume
Press to adjust the volume.
Play/Pause
Press to play or pause a
docked iPod or iPhone.
Customer Support: 1-888-999-4215
iLive
iPod and iPhone
Docking an iPod or iPhone
1. Press the top right corner of the Soft Eject iPod
Door to access the Dock for iPod and iPhone.
2. Swing the Stability Lever down to stabilize the
sound bar while docking an iPhone or iPod.
3. Connect your iPod or iPhone to the connector
inside the Dock for iPod and iPhone.
When the sound bar is plugged in, using AC power,
the docked iPod or iPhone will charge.
Stability Lever
Playing a Docked iPod or iPhone
1. Follow the instructions for
Docking an iPod or iPhone.
2. Press the Power button to turn the sound bar on.
3. Press the Source button to switch to iPod mode.
4. Press the Play/Pause button to begin playing
music from the docked iPhone or iPod.
iLive
App
Manually Downloading the App
Automatically Downloading the App
1. Go to the App Store on your iPhone,
iPod touch, or on iTunes.
1. Follow the instructions for
Docking
g an iPod or iPhone.
2. Search for ITPW891B.
2. Once the iPod or iPhone
is docked a screen will
appear prompting you to
download the ITPW891B
app from the App Store.
3. Download the App.
When downloading directly from iTunes, sync the
app to your iPod or iPhone from iTunes.
3. Press Yes to automatically
download the ITPW891B app.
ITPW891B Features
CLOCK & CALENDAR
The clock and calendar will automatically sync with
the time on the iPod or iPhone, so thereâs no need to
set it.
ALARM
Add as many alarms as you like using the settings
menu. You can set them to wake to iPod music or
Nature Sounds.
WEATHER
Type in your location and view your current weather
conditions along with the time on the home page of
the app.
PHOTO SLIDE SHOW
Select photos that are already on your iPod or
iPhone and play a slideshow with your music in the
background.
FM RADIO
While docked on the bar speaker, use the ITPW891B
to tune the FM radio and save FM radio station as
presets.
SOURCES
When docked with the bar speaker you can use the
ITPW891B to switch between FM Radio, iPod, and
Line Input modes.
Customer Support: 1-888-999-4215
iLive
FM Radio, Clock, Sleep Timer, and Timer
FM Antenna
Setting the Sleep Timer
Adjust the built-in FM wire antenna
to improve FM radio reception.
1. Press the Power button to turn the power on.
Tuning the FM Radio
1. Press the Power button to turn the sound bar on.
2. Press the Source button to
switch to FM radio mode.
3. After the set sleep time has expired, the
sound bar will automatically power off.
Set the sleep time to â00â to turn the sleep timer off.
3. Press the Tuning buttons on the
remote to tune the FM radio.
Setting the Timer
Listening to a Saved Radio Station
2. Press the Timer button on the remote.
1. Press the Power button to turn the sound bar on.
1. Press the Power button to turn the power off.
The hour on the display will begin blinking.
2. Press the Source button to
switch to FM radio mode.
3. Press the Skip/Search buttons on
the remote to adjust the hour.
) buttons on the remote
3. Press the Menu (
to cycle through saved radio stations.
4. Press the Timer button.
Saving a Radio Station
5. Press the Skip/Search buttons on
the remote to adjust the minute.
1. Follow the instructions for Tuning the FM Radio.
2. After tuning to the desired station, press
the Memory button on the remote.
) buttons on the
3. Press the Menu (
remote to select a preset channel.
4. Press the Memory button to save the current
radio station to the selected preset.
Up to 20 stations can be saved to the sound barâs
memory.
Setting the Clock
1. Press the Power button to turn the power off.
2. Press the Clock button on the remote.
The hour on the display will begin blinking.
3. Press the Skip/Search buttons on
the remote to adjust the hour.
4. Press the Clock button.
The minute on the display will begin blinking.
5. Press the Skip/Search buttons on
the remote to adjust the minute.
6. Press the Clock button to finish setting the clock.
10
2. Press the Sleep button repeatedly
to set the sleep timer.
iLive
The minute on the display will begin blinking.
The source on the display will begin blinking.
6. Press the Skip/Search buttons on the remote
to switch between iPod and FM modes.
7. Press the Timer button to finish setting the timer.
After the set time is reached, the sound bar will
automatically power on to the set source.
Activating the Timer
1. Press the Power button to turn the power off.
2. Press and hold the Timer button to
activate or deactivate the timer.
The letter âTâ will appear on the display when the
timer is activated.
Wireless Subwoofer Setup
Important Note
Pairing the Wireless Subwoofer
While the wireless subwoofer was paired at the
factory to allow for immediate operation, it will
occasionally become un-paired in transit. Unpairing can also occur in day-to-day operation
due to different environmental influences. This is
normal. Should this occur, please follow the pairing
instructions below.
1. Plug the sound bar into a power source and press
the Power button to power the sound bar on.
2. Plug the wireless subwoofer into a power
source and press the Power switch to
power the wireless subwoofer on.
What does it mean to pair?
3. Press and hold the Pairing button on
the wireless subwoofer until the Power/
Pairing Indicator begins to blink.
Pairing allows the sound bar to recognize a wireless
subwoofer. Once a wireless subwoofer is paired, the
sound bar will transmit audio to it.
4. While the Power/Pairing Indicator on the
wireless subwoofer is blinking, press and
hold the Pairing button on the sound bar.
Additional Information
t
Once paired, the wireless speaker can be moved
up to 200ft (line-of-site) or up to 90ft (indoors)
depending on environmental conditions. Should
the sound drop or become garbled it will be
necessary to move the wireless subwoofer to
another location in order to receive the signal
clearly.
Link Indicator
The Power/Pairing Indicator will remain lit once the
sound bar and wireless subwoofer has been paired.
After pairing, the wireless subwoofer may take
up to 30 seconds to begin playing audio from the
sound bar.
System Status
OFF
SLOW FLASHES
Powered off
Standby mode
QUICK FLASHES
Attempting to pair
SOLID LIGHT
Paired and playing
Customer Support: 1-888-999-4215
iLive
11
Basic Connectivity
This is a basic flow chart of how you can connect your home entertainment devices to the sound bar, and
in turn how the sound bar connects to them.
For optimal performance, always connect video sources such as a DVD players, gaming consoles or set-top boxes directly
to your television.
WIRELESS
SUBWOOFER
DVD PLAYER
TELEVISION
DIGITAL CABLE or SATELLITE TUNER
GAMING CONSOLE
WIRELESS
AUDIO
VCR
12
iLive
Video and Audio Inputs/Outputs
Using the Composite Video Input (AV)
Using the Component Video Output
For optimal performance, always connect video
sources such as a DVD players, gaming consoles
or set-top boxes directly to your television.
The Component Video Output will only output
video from a docked iPod or iPhone. It cannot
output video from the composite video input.
1. Connect an RCA cable (included) to the
Composite Video Input (AV) and a video source.
1. Connect a component video cable
(not included) to the Component
Video Output and a television.
2. Follow the instructions for Using
a Composite Video Output.
3. Follow the instructions for Using
the RCA Audio Inputs (AV).
4. Press the Power button to turn the sound bar on.
5. Press the Source button to switch to AV mode.
6. Use the native controls on the connected
video device to control video that
runs through the sound bar.
2. Adjust the connected television
to the proper input setting.
3. Press the Video button on the remote
to switch between Composite and
Component video output modes.
4. Video from a docked iPhone/iPod can
now be played through the bar speaker
to the connected television.
Using the RCA Audio Input (Aux)
Using the RCA Audio Input (AV)
1. Connect an RCA cable (included) to
the RCA Audio Input (AV) on the
sound bar and an audio source.
1. Connect an RCA cable (included) to
the RCA Audio Input (Aux) on the
sound bar and an audio source.
2. Press the Power button to turn the sound bar on.
2. Press the Power button to turn the sound bar on.
3. Press the Source button to switch to Aux mode.
3. Press the Source button to switch to AV mode.
4. Use the native controls on the connected
audio device to begin playing music
through the connected sound bar.
4. Use the native controls on the connected
audio device to begin playing music
through the connected sound bar.
Using the 3.5mm Audio Input
Using the Composite Video Output
1. Connect a 3.5mm Audio Input cable (not
included) to the 3.5mm Audio Input on
the sound bar and an audio source.
1. Connect an RCA cable (included) to the
Composite Video Output and a television.
2. Adjust the connected television
to the proper input setting.
3. Press the Video button on the remote
to switch between Composite and
Component video output modes.
4. Video from a docked iPhone/iPod can
now be played through the bar speaker
to the connected television.
Customer Support: 1-888-999-4215
2. Press the Power button to turn the sound bar on.
3. Press the Source button to switch to Line mode.
4. Use the native controls on the connected
audio device to begin playing music
through the connected sound bar.
Using the Subwoofer Output
1. Use an RCA cable (included) to connect an
external subwoofer to the Subwoofer Output.
2. When audio is played through any
source, the sound bar will automatically
use the connected subwoofer.
iLive
13
Professional Audio Modes
Using BBE Professional Audio Modes
Press the BBE Live, Music, and Movie buttons on the
remote to switch between BBE Live, Music, and Movie
audio modes.
Live
Your favorite programming becomes more vibrant
and engaging as BBE Live reveals all the detail and
character of voices, ambient sounds and music -even at low volume. Experience live sports and video
games like youâve never heard them before. Imagine
hearing the crack of a bat, the shriek of a race car,
the ricochet of gunfire with BBE Live -- itâs like being
there!
Music
Imagine what it sounds like to be on stage or in the
studio with your favorite musical artist -- hearing
and feeling the raw emotion of vocals, the crunch
of guitars, the impact of percussion. BBE music
integrates the same professional, proprietary
harmonic restoration technology used in renown
concert halls and recording studios to restore lost
details of compressed music -- for sound quality
closer than ever before to the original performance.
Movies
With BBE Movie, youâll finally get audio quality thatâs
on par with todayâs HD picture quality. From massive
explosions to the faintest whisper, todayâs 3D movies
feature more complex soundfields than ever before.
Thatâs why BBE Movie incorporates proprietary BBE
HD-3D Sound technology to reveal more of the delth
and space engineered into the audio mix. Whether
itâs the latest blockbuster or a favorite classic, BBE
Movie reveals sonic details you may never have
heard before.
14
iLive
Mounting to a Wall
Important Notes
Included Hardware
We recommend having this sound bar professionally
mounted.
Wall mount bracket
2 Long screws
2 Wall anchors
Required Tools
t
t
t
Manual or Power Screwdriver
Stud Finder
Pencil
Tape Measure
Level
Getting Started
1. Use the Tape Measure to decide how high
youâd like to hang the sound bar on the wall.
2. The sound bar must be hung within
6 feet of an AC power outlet for the
attached AC power cable to reach.
STUDS
16â
FROM CENTER TO CENTER
3. Use the Stud Finder to locate 2 parallel wooden
studs to screw the mounting brackets into.
WALL
4. Mark the wall at the center of the
studs using the Pencil.
5. Line the Level up on both of your marks to
make sure they are level. If theyâre not, adjust
the marks as needed to make them level.
MOUNTING BRACKET
6. After youâve double checked your markings,
drill the long screws through the hole
on the mounting bracket directly into
the marks youâve made on the wall.
If you are unable to mount the bracket directly
into two studs, use the Wall Anchors to secure the
bracket into drywall.
7. Slide the sound bar onto the mounting bracket,
and make sure there is a firm and stable
connection before letting go of the sound bar.
POWER
SOURCE
VOLUME
PAIRING
LINE IN
8. Finally, use the Level one last time to
confirm that the sound bar is level.
POWER
SOURCE
VOLUME
PAIRING
LINE IN
Customer Support: 1-888-999-4215
iLive
15
Company Information
International Support
To download this Userâs Guide in English, Spanish, or
French, visit the support section at www.ilive.net.
Para transferir esta guĂa de usuario en inglĂŠs,
espaĂąol, o francĂŠs, visite la secciĂłn de la ayuda en
www.ilive.net.
Pour tĂŠlĂŠcharger ce guide de lâutilisateur en anglais,
espagnol, ou français, visitez la section de soutien
chez www.ilive.net.
Contact Information
Phone: 1-888-999-4215
Email: customerservice@ilive.net
Parts Email: partsinfo@dpi-global.com
Website: www.ilive.net
Copyright Š 2011 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 About : uuid:c54c03c0-8082-4f84-a448-ee9a94d8ca47 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2011:03:21 16:18:24+08:00 Modify Date : 2011:03:25 16:58:11+08:00 Metadata Date : 2011:03:25 16:58:11+08:00 Document ID : uuid:6426930e-17ee-41f5-b45b-222ee0470825 Instance ID : uuid:0a5765bf-24e3-4336-bbc8-a7ab1014811e Format : application/pdf Title : untitled Has XFA : No Page Count : 16EXIF Metadata provided by EXIF.tools