Nikko Co MR2D2TX Radio Controlled Toy(Transmitter) User Manual R2D2 EN Latest indd

Download:
Mirror Download [FCC.gov]
Document ID	809342
Application ID	+98zlTiatbDzdU35Wlcl2g==
Document Description	User Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	247.5kB (3093713 bits)
Date Submitted	2007-06-28 00:00:00
Date Available	2007-06-28 00:00:00
Creation Date	2007-06-26 13:48:46
Producing Software	Acrobat Distiller 7.0.5 for Macintosh
Document Lastmod	2007-06-28 11:38:28
Document Title	R2D2_EN-Latest.indd
Document Creator	Adobe InDesign CS2 (4.0)
Document Author:	fle7

How to Use
Memo
For function of each button, refer to “Button List” on page
10.
Open the cover.
1) Press
2) Turn
(Refer to “Open the cover of the
lightsaber” on page 51.)
Press the button and talk, paying attention to microphone
and speaker location.
Make sure that your phone is online on contact screen.
Select Skype Sound Test.
Click [ONLINE] button and [TALK] button on screen key.
Then press the talk button
on Skype screen to talk.
Memo
When using R2-D2 as a web camera, turn off R2-D2
power after use. (Refer to “Turn on R2-D2 Power” on page
41.)
Memo
For detailed operation method of Skype, refer to Skype
homepage (http://www.skype.com).
Memo
If you install the software provided with this product, you
can change the ring tone to Star Wars sound. To change
your ring tone, follow the procedures outlined below.
1. Start Skype and click [Tools] – [Options] – [Sounds].
2.
1) Select “Playback when a call
is received”.
2) Click your desired sound
to select it.
¯
¯
R2-D2™ Skype Web Cam
3) Click “Save”.
Or click [Return to Default Setting].
Music 0 ~ 6 are Star Wars sound.
53
How to Use
Operate R2-D2 in The House from Outside Location
[Skype Mode]
You can move R2-D2 in your house by Skype talk between
the computer in your house and another computer outside the
house.
Memo
To use R2-D2 in Skype mode, you need to create another
Skype account besides the current account. Refer to “How
To Create A Skype Account” on page 55.
< At home >
• Disable the power saving function of the computer
• Start Skype
• Change Skype settings. (Refer to the next page)
• Set the power switch on R2-D2 to “ON” or “Standby”
¯ “Standby” mode is recommended to avoid high power
consumption in “ON” mode
< Outside the house >
• Start Skype and connect to the computer in
the house
• Operate R2-D2 with lightsaber or screen keys
Click to select.
Click to select.
R2-D2 is moved by lightsaber
or screen key operation
R2-D2™ Skype Web Cam
54
How to Use
How To Create A Skype Account
To operate R2-D2 located at home from an outside location, you
need to create another Skype account exclusively for operation
of R2-D2. R2-D2 cannot be operated by using the Skype account
registered for Skype calls.
Note: To protect your privacy, please create 2 separate accounts
for R2-D2 operation and Skype calls.
When “Auto-answer calls” is set for Skype calls, any Skype user
can view your room if you select “Anyone” for “Allow calls from”.
Read the description stated below to make appropriate settings.
° Click [Tools] – [Options] – [Privacy] – [Privacy options]. Click
“Show details”.
Click
Memo
Setup screen may vary depending on Skype version. If
different screen from the above picture is displayed, refer
to Skype Help.
° Allow calls/chats from:
• anyone
• only people from my
Contacts
• only people I have
shared my details with
Allows calls from anyone.
Only allows calls/chats from people
on your contact list.
Only allows calls/chats from people
you have shared your details with.
The difference between “people on my Contacts” and “people
I have shared my details with” is whether or not to share your
details. If you register a person on your contact list but do not
share your details with the person, the person is categorized as
“people on my Contacts”.
“People I have shared my details with” is a person you registered
on your contact list and allowed to share your details with.
This means that a person carrying a Skype name with whom you
share your details is “people I have shared my details with” while
a person who was just registered on your contact list is “people
on my Contacts”.
If you created an account exclusively for R2-D2 and registered
only your account on your contact list, nobody else will be able
to view your room.
For Skype calls, many people have already been registered on
your contact list. You may set the privacy protection level for
operation of R2-D2 by creating a separate Skype account.
R2-D2™ Skype Web Cam
55
How to Use
How To Create A Skype Account
Following the instructions on the screen, set up your
Skype name (account ID) and password exclusively
for R2-D2.
Log out of Skype.
Subsequently, perform the same procedures as
when you created your Skype ID for the first time.
Click
R2-D2™ Skype Web Cam
56
How to Use
Changing the Skype Account
Add Contact to Your Contact List
• From outside
Add the account to be used in your house to your contact list
by [Tools] – [Add contact].
Log out of Skype.
Enter the account of your
computer to be used outside
of the house in the search
box and perform a search.
Select a Skype name.
Find and select the search
result you wish to add.
Click “Add Skype Contact”.
• At home
Add the account of your computer to be used outside of the
house to your contact list.
Add a contact following the same procedures as adding a
contact from outside of the house.
R2-D2™ Skype Web Cam
57
How to Use
Skype settings on the computer at home
Please make the following settings.
Turn on R2-D2 power.
(Refer to “Turn on R2-D2 Power” on page 29.)
Click [Tools] – [Options] – [Video].
Click [General] – [Video settings]. Check [Enable Skype
Video] and check [Start my video automatically] in the
“When I am in a call section”. Select [TridVid Capture] in
the [Select Webcam] section.
Click [Detail].
Select [Calls] – [Incoming Calls]. Click “Show details” and
then check [Auto-answer calls].
Click and check.
Note: Remove the checkmark from [Auto-answer calls] if
not in Skype mode.
Click [Tools] – [Options] – [General] – [Audio settings].
Confirm that “NIKKO R/C” is selected for the speaker. If
another device is selected, select “NIKKO R/C”.
Click and check.
Note: Remove the checkmark from [Start my video
automatically] if not in Skype mode.
R2-D2™ Skype Web Cam
58
How to Use
Skype settings on the computer used outside
Click the [Save] button.
Note: Do not activate the camera viewer.
Start R2-D2 launcher to activate the screen key.
10
Memo
To connect to R2-D2 located at home from an outside
location, click the [ONLINE] and [CONTROL] buttons using
the screen key on your computer used outside.
The popup window allowing you to select the connecting
destination will be displayed. Select the account to be used
in your house.
You do not need to select the connecting
destination.
Click to select.
Click to select.
Wait without performing anything.
Note: R2-D2 cannot be operated from outside if Skype and R2D2 launcher are not active.
Note: Set the power option of your computer (power option on
the control panel) to “Always On” and set the “System
standby” and “System hibernates” to “Never”.
R2-D2™ Skype Web Cam
To operate R2-D2 with the lightsaber, connect the lightsaber
to the computer.
Start Skype.
Start R2-D2 launcher.
59
How to Use
Call the computer located in your house through Skype.
When operating R2D2 using screen key,
select the connecting
destination.
Memo
This operation is not necessary if you operate R2-D2 with
the lightsaber.
Click either one.
You will receive images from the computer located in your
house after a few seconds.
Activate the screen key.
Click the [ONLINE] and [CONTROL] buttons..
R2-D2™ Skype Web Cam
Operate R2-D2 with the lightsaber or screen key..
Memo
Skype video quality can be adjusted. Click [Tools] – [Options]
– [General] – [Video settings]. Click [Select Webcam] in the
video settings section to display the properties of TridVid
Capture. Settings of items such as brightness, contrast and
hue can be made with the adjustment tags. If you check the
box on the right side of each item, appropriate value is set
automatically.
60
How to Use
Sound Action of Lightsaber
Swing the lightsaber
When the lightsaber power is turned on, the LED indicator
lights up in blue and you can enjoy the lightsaber sounds same
as the one heard in the movie.
Note: Before you swing the lightsaber, make sure that
the LED indicator is fixed to the lightsaber firmly by
referring to page 39. If the LED indicator is not fixed
firmly, the batteries inside may come off and cause
personal injury.
Turn on the power
LED
• Sound 1: When you turn on the lightsaber power, you hear humming sound
for blade opening.
• Sound 2: You hear idling sound if you do not move lightsaber.
• Sound 3: You hear battle-clash sound if you swing lightsaber.
Note: Grip lightsaber firmly to swing. Make sure the area
around you is clear.
Memo
Turn off the power of lightsaber when finished using it.
R2-D2™ Skype Web Cam
61
Camera Viewer Settings
Click [MENU] button displays the list of setting menus.
Configure settings by selecting desired menu.
Setting screen may be changed by clicking a tab.
• [Security] screen
Configures setting to ask for password on startup.
Item
Description
Ask for password on Configures whether or not to enter
startup
password on startup.
Old Password
Input old password to change
password.
New Password
Input new password. Input a password
in this column to set your password for
the first time.
Confirm
Input the password again to confirm
your new password.
Memo
Make sure to set the “Channel” (refer to page 65.)
Click
Memo
If you forgot the old password, uninstall (refer to “Camera
Viewer” on page 67) and then reinstall the software.
Click
R2-D2™ Skype Web Cam
62
Camera Viewer Settings
• [Display] screen
• [Alarm] screen
Configures settings on camera images.
Records motion pictures or take still pictures in response to
movement or sound captured by the camera.
Item
Camera Alias
Description
Sets the camera channel (CH1 or CH4)
printed on the package.
On Screen Display Displays date, time and channel number
on the screen.
Video Adjustment Standard: Selects video standard (PAL/
NTSC).
¯ This selection is not required for this
product. Maintain the default setting
(NTSC) to use this product.
Brightness: Adjusts brightness of screen.
Sharpness: Adjusts sharpness of screen.
Contrast: Adjusts screen contrast.
Saturation: Adjust the saturation of
screen.
Default: Clicking “Default” returns all
settings under Video Adjustment except
for Standard to default settings.
Item
Alarm setup
Alarm operation
Record strategy of
alarm
Capture strategy of
alarm
Description
Select and check the channel which
you want to monitor.
Open sound alarm: Provides alarm
when any sound is detected.
Configures alarm settings.
Record: Records motion pictures.
Capture: Takes still pictures.
Play alarm sound: Plays alarm sound.
Sets recording time in case of alarm.
Settable when “Record” is selected for
“Alarm operation”.
Sets the time until commencement of
recording in case of alarm. Also sets
the number of images captured by
camera in 1 second.
Settable when “Capture” is selected for
“Alarm operation”.
Memo
Set the power switch on R2-D2 to “ON” position. If it is set
to “Standby”, the above functions cannot be performed.
R2-D2™ Skype Web Cam
63
Camera Viewer Settings
• [Record] screen
• [Capture] screen
Configures settings on recording motion pictures.
Configures settings on capturing still pictures.
Item
Record File Path
Description
Selects the location to store recording
motion pictures by clicking [Change]
button.
Record File Setup Sets file format of recording motion
pictures.
Compression: Selects compressing
method for motion pictures.
File Format: Selects file format of motion
pictures.
Image Size: Selects the size of motion
pictures.
Frame rate: Selects frame rate (i.e.,
number of images per second)
Storage Strategy Sets the total file size limit for motion
pictures storage as well as the size limit
per file.
Take following
Sets the operation when the total file
operation when
size limit for moving picture storage is
total file size limit reached.
is reached
Delete oldest files: Deletes old files.
Stop capturing and notify user: Stop
recording and displays a message.
R2-D2™ Skype Web Cam
Item
Picture Path
[Change]
Picture Format
Description
Selects the location to store captured still
pictures by clicking this button.
Sets file format of captured still pictures.
Compression: Selects compressing
method for still pictures.
Image Size: Selects the size of still
pictures.
Storage Strategy
Sets the total file size limit for still pictures
storage as well as the size limit per file.
Take following
Sets the operation when the total file size
operation when
limit for still picture storage is reached.
total file size limit is Delete oldest files: Deletes old files.
reached
Stop capturing and notify user: Stop
capturing pictures and displays a
message.
64
Camera Viewer Settings
• [Plan task] screen
• [Channel]
Configures setting to take still or motion picture automatically at
a preset date and time.
Set the following items by clicking [New] button and register by
pressing [Add] button.
Use this product while the Sound is set to OFF. If it is set to ON,
change it to OFF.
Item
Task Strategy
Timing
Operation
Channel
Description
Selects alarm cycle (Daily, Weekly,
Monthly or Only Once).
Sets the date and time for recording or
capturing pictures.
Sets recording or capturing intervals.
Selects channel.
• [Channel]
Memo
Referring to the package of this product, select either CH1 or
CH4.
For channel, select either CH1 or CH4 referring to the
package of this product. If the channel and setting are not
matched, recording is not performed.
• [About] screen
Displays version of camera viewer.
R2-D2™ Skype Web Cam
65
Uninstall Software
This section describes how to remove unnecessary
software and/or Skype.
1) Click to
select.
2) Click
SkypeAPI
Cancel the link between Skype and other applications
(dialer, R2-D2 launcher and screen key).
3) Click
Start Skype.
Remove both of the above.
Click [Tools] – [Options] – [Advanced] – [Update].
Dialer
1) Click
Click [Start] – [All Programs] (or [Programs]) – [USBPhone
(LCD)] – [USBPhone Dialer_Skype] – [Uninstall].
Subsequently, operate following the instructions on the screen.
2) Click
R2-D2™ Skype Web Cam
66
Uninstall Software
ffdshow
Camera viewer
Click [Start] – [All Programs] (or [Programs]) – [ffdshow] – [Uninstall].
Subsequently, operate following the instructions on the screen.
R2-D2™ Skype Web Cam
Click [Start] – [All Programs] (or [Programs]) – [NIKKO] – [CameraViewer] – [Uninstall CameraViewer].
Subsequently, operate following the instructions on the screen.
67
Uninstall Software
R2D2 Launcher
Skype
Memo
Click [Start] – [Control Panel] (or [Settings] – [Control
Panel]).
Double-click [Add or Remove Programs].
If you continue to use Skype, do not uninstall.
1) Click
2) Click
Click [Start] – [Control Panel] (or [Settings] – [Control
Panel]).
Double-click [Add or Remove Programs].
1) Click
¯ Skype version varies depending on installation conditions.
2) Click
Subsequently, delete the program “R2-D2 Launcher” following the
instructions on the screen.
Subsequently, operate following the instructions on the screen.
R2-D2™ Skype Web Cam
68
Troubleshooting
Trouble
[ONLINE] and
[OFFLINE] on
screen key cannot
be switched.
Lightsaber does
not function as
a Skype phone
button.
R2-D2 does not
move.
R2-D2™ Skype Web Cam
Check the followings
Is Skype online?
(Set to )
Is Skype online?
(Set to )
Is the battery polarity correct?
Install batteries in the correct polarity.
Is the power switch on R2-D2 set to “OFF”
position? Set the power switch to “ONʼ or
“Standby”.
Is USB cable connected correctly? Check
the USB cable connection referring to “USB
Cable Connection” (on page 40).
Did you attempt to operate R2-D2 from
screen key while lightsaber is connected
to the stand?
Disconnect USB cable from lightsaber
when using screen key.
Is the LED indicator of R2-D2 red? If yes,
the batteries have run out. Please replace
with new batteries. (LED indicator in blue
means battery is in full power status.
Did you attempt to operate R2-D2 with
lightsaber while lightsaber is not connected
to the stand?
Connect lightsaber to the stand with USB
cable to operate R2-D2 with lightsaber.
R2-D2 does not
move according
to remote control
operation.
Make sure that the "Red Light" is ON on
the "Lightsaber Skype Phone" and the
"Blue Light" of the STAR WARSTM Logo is
ON on the "Stand"
Did you press [ONLINE] or [TALK] on
screen key? Please press [CONTROL]
key.
Delay in operation may occur when using
Skype (when remote controlling R2-D2).
Did dust go in the fall prevention sensor?
If the ball movement of the sensor is not
sharp, remove the ball and remove dust.
1) Remove the screw with a
Phillips-head screwdriver
2) Remove the cover
3) Remove the ball
and remove dust
4) Assemble back
69
Troubleshooting
If the tire does not roll smoothly, remove
the cover and clean the dust accumulated
around the axle.
3) Remove dust
2) Remove the cover
1) Remove the screw
with a Phillips-head
screwdriver.
4) Assemble back
No picture is
displayed on
camera viewer.
R2-D2™ Skype Web Cam
Has device controller been installed in
camera viewer? Check the installation.
Is the stand connected to computer with
USB cable? Connect computer and stand
with USB cable.
Has the power of R2-D2 been turned on?
Set the power switch on R2-D2 to “ONʼ or
“Standby” position.
(When the power switch is set to “Standby”,
R2-D2 is in power-saving mode. Continuously press the No.5 key on the lightsaber
for 10 seconds.)
Is the LED indicator of R2-D2 red? If yes,
the batteries have run out. Please replace
with new batteries. (LED indicator in blue
means battery is in full power status.)
Is the channel of camera viewer correct?
For camera viewer channel, either CH1
or CH4 is specified on the package. Make
the correct setting on the “Channel” screen
of the menu setting.
Is the video standard selected correct? Try
to change video setting (NTSC/PAL) on
“Display” screen of menu setting.
Is the distance between R2-D2 and the
stand too far? Use R2-D2 within control
distance from the stand without any
obstruction.
Reception condition may not be good in
some area. The condition may improve if
you move to a different location.
When R2-D2 is in power-saving mode
(i.e., the power switch is set to “Standby”),
camera may not be reactivated even if
No.5 key on the lightsaber is pressed for
more than 10 seconds. Reactivation may
need some time depending on product
condition. Try to press the No.5 key for
about 20 seconds.
70
Troubleshooting
Troubles about
Skype
R2-D2™ Skype Web Cam
Is [Start my video automatically] checked?
Click [Tools] – [Options] – [Video] and
check [Start my video automatically].
Is correct webcam selected on Skype?
Click [Tools] – [Options] – [Video] – [Select
Webcam] and check the setting.
Is the channel of camera viewer correct?
For camera viewer channel, either CH1
or CH4 is specified on the package. Make
the correct setting on the “Channel” screen
of the menu setting.
Is the camera viewer active when you start
Skype? Close camera viewer and restart
Skype.
What to do if images on camera viewer
screen are not smooth or computer does
not run smoothly? Click [Tools] – [Privacy]
– [Manage other programsʼ access
to Skype API] and delete redundant
applications.
Unable to talk
(No sound is
heard).
Did you press [CONTROL] on screen key?
Please press [TALK] key.
Did you use a headset or a speaker while
the lightsaber is connected to the stand?
Disconnect the headset or speaker.
Is the audio device setting correct? Click
[Tools] – [Options] – [Sound Devices] and
make sure that the followings has been
selected for “Audio In” and “Audio Out”.
When talking using lightsaber
Audio In: USB Audio Device
Audio Out: USB Audio Device
When using a commercial headset
(When the headset is connected to mic
terminal on the computer and speaker
terminal)
Audio In: Windows Default Device
Audio Out: Windows Default Device
Is the volume setting correct? Set the
volume using the following methods.
•
•
71
Troubleshooting
1. On Windows, click [Start] – [Control
Panel] – [Sound, Voice and Audio Device]
– [Sound and Audio Device]. (For Windows
2000), click [Start] – [Settings] – [Control
Panel] and double-click [Sound and Audio
Device].
2. Click [Audio] tab.
3. Click [Volume] button on [Sound
playback] and adjust the volume, balance
and tone on the displayed screen.
4. Make the similar settings for [Sound
recording].
5. Click [OK] button.
Talk is interrupted. Talk may be interrupted if microphone
volume on talking person side is too loud.
Reduce the microphone volume.
Delay may occur and talk may not be
smooth if Skype line is congested.
¯ Input of computer sound is described as “sound recording”. It
does not mean actual sound recording.
How to change device driver
This document describes how to change the device driver when
you upgrade/update to a new software or in the event that there is
a trouble in operation due to malfunction of the device driver.
Device manager
Before you start to reinstall the
driver, delete the existing “Trident
~ Video” on the Device Manager
screen.
After the ordinary installation
using a CD (which contains the
device driver) has completed,
connect the stand with the USB
cable.
Check “Install from list or specific
location” and then click [Next].
On the subsequently displayed
screen, check the [Select the
driver to be installed without
performing a search] and then
click [Next].
R2-D2™ Skype Web Cam
72
Troubleshooting
Select the appropriate device
driver and then click [Next].
Usually, choose “Trident Analog
Video”.
The device driver to be installed
will be displayed on the screen.
Confirm and click [Next] if the
device driver is correct.
The screen requiring insertion of the installation CD or the screen
shown above will be displayed.
If the screen requiring insertion of the installation CD is displayed,
insert it.
If the screen shown above is displayed, click [References] to
display the file selection screen. Open the driver folder in the root
of the CD drive and select “TridVid”. Click [Open] and then return
to the screen shown above. Click [OK].
Copying of the file is resumed.
Click [Complete] to complete the changing of the device driver.
R2-D2™ Skype Web Cam
73
Specifications
• R2-D2 (Web camera)
Image sensor
Resolution
CMOS
510×492 (NTSC)
628×582 (PAL)
View angle
62°
Min. illuminance
5lux/F1.2
Transmit frequency
ISM 2.4GHz ~ 2.483GHz
Transmit power
10mW/CE ; 2mW/FCC
Modulation method
FM
Bandwidth
18MHz
RC function
11 functions
Power supply
6 AA alkaline dry cell batteries
Power consumption
80mA
Dimension (WxDxH)
136×200×130 mm
Weight
450g (including batteries)
Operating temperature 5 ~ 35°C (41 ~ 95ºF)
Control distance
7 meters
Camera Transmission 7 meters
distance
• Lightsaber (USB phone)
Environmental noise
Power supply
Power consumption
Frequency band of speaker
Frequency band of microphone
Dimension (WxDxH)
Weight
Operating temperature
≤ 60VdB (A)
2 AA alkaline dry cell batteries
80mA
20Hz ~ 10KHz
70Hz ~ 20KHz
283×65×63 mm
110g (including batteries)
5 ~ 35°C (41 ~ 95ºF)
• Stand (controller)
Video receiver
Receiver frequency
Intermediate frequency
Modulation method
Receiver sensitivity
Operating temperature
ISM 2.4GHz ~ 2.483GHz
480MHz
FM
≤-85dBm
5 ~ 35°C (41 ~ 95ºF)
Radio controller
Frequency
Modulation method
26.995MHz(BAND1)
27.195MHz(BAND5)
ASK
General
Interface
Power supply
Power consumption
Dimension (WxDxH)
Weight
Operating temperature
R2-D2™ Skype Web Cam
USB 2.0
DC5.0V (USB bus power)
Max. 310mA
232×106×110mm
450g
5 ~ 35°C (41 ~ 95ºF)
74
Specifications
FCC Certifications
This equipment
Equipmenthas
hasbeen
beentested
testedand
andfound
foundtoto
comply
with
limits
a Class
B digital
device,
pursuant
to part
of the
FCC
This
comply
with
thethe
limits
forfor
a Class
B digital
device,
pursuant
to Part
15 of15FCC
Rules.
Rules. limits
Theseare
limits
are designed
to provide
reasonable
protection
interference
when theinstallation.
equipmentThis
is operated
in a
These
designed
to provide
reasonable
protection
againstagainst
harmfulharmful
interference
in a residential
equipment
commercialuses,
environment.
This equipment
generates,
uses,
can radiate
energy
and,
not installeditand
in
generates,
and can radiate
radio frequency
energy.
If and
not installed
andradio
usedfrequency
in accordance
with
theifinstructions,
mayused
cause
accordance
with
the
instruction
manual,
may
cause
harmful
interference
to
radio
communications.
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning
Operation
of this
equipment
a residential
area to
is try
likely
cause the
harmful
interference
in or
which
thefollowing
user willmeasures:
be required to
the
equipment
off and
on, thein
user
is encouraged
andtocorrect
interference
by one
morecase
of the
correct the
his own antenna.
expense.
-Reorient
orinterference
relocate theat
receiving
-Increase the distance between the equipment and the receiver.
-Connect
the compiles
equipmentwith
to outlet
on a
different
from
that to which
the receiver
connected.
This device
Part 15
ofcircuit
the FCC
Rules.
Operation
is subject
to the is
following
two conditions: (1) this device may
-Consult
theharmful
dealer interference,
or an experienced
radio/TV
technician
for help.any interference received; including interference that may cause
not cause
and (2)
this device
must accept
undesired operation.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at this own expense.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received; including interference that may cause
undesired operation.
R2-D2™ Skype Web Cam
75

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:06:28 11:38:28-07:00
Create Date                     : 2007:06:26 13:48:46-07:00
Title                           : R2D2_EN-Latest.indd
Author                          : fle7
Creator                         : Adobe InDesign CS2 (4.0)
Producer                        : Acrobat Distiller 7.0.5 for Macintosh
Page Count                      : 23
Mod Date                        : 2007:06:28 11:38:28-07:00
Creation Date                   : 2007:06:26 13:48:46-07:00
Metadata Date                   : 2007:06:28 11:38:28-07:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools