Nikko Co R2D2SP R2-D2 DVD Projector User Manual

Nikko Co Ltd R2-D2 DVD Projector

Users Manual

ггVarious power switch: : : The remote control buttons have different functions depending on the active mode. To change the mode, press the desired button on the right side of the panel (Input/Output mode select buttons).To check which mode is selected, just press any button other than the Input/Output select buttons and the active mode will light up.About R2-D2 sound (R2-D2 sounds are emitted by a special internal speaker inside R2-D2): When the power is ON, etc., R2-D2 sounds will be made automatically. Also, R2-D2 sounds can be made by pressing the R2-D2 sounds button. Each time the button is pressed, R2-D2 sounds are randomly played.Explanation of remote control buttonsInput/outputselect buttons::::Button used when controlling R2-D2 or adjusting projection position: : : :: : : : :Sound adjust button::::::::::Adjustment menu calling buttonDefault settings screen calling buttonSafety sensor release buttonR2-D2 Sound Effects ButtonVarious buttons for playing:: :: : : Projected picture adjustment::Turns projector power ON/OFFTurns DVD drive power ON/OFFTurns power of iPod inserted in slot ON/OFFWhen this button is pressed while in DVD mode, it changes to MEDIA mode.Power switchRemote control and stand setupConvenient functions
гг*4 Only possible in VGA input. Button In Projector Mode In DVD mode In iPod mode In DVI-I mode In Media mode 087(ā5ā/ 087(ā5ā/ 087(ā5ā/࡯Volume UP/DOWN ࡯࡯Volume UP/DOWNButton In Projector Mode In DVD mode In iPod mode In DVI-I mode In Media mode ࡯Instant chapter, trackselection6HH³'LUHFW$FFHVVLQJchapter/track via the UHPRWHFRQWURO´RQSJ࡯Page down (next page when using PowerPoint) ࡯&XUVRUĘ³PRYHFXUVRUXS´ZKHQXVLQJ2IILFHapplication) ࡯&XUVRUĘ³PRYHFXUVRUXS´ZKHQusing Office application) ࡯3DJH8S³SUHYLRXVSDJH´ZKHQXVLQJ2IILFHapplication) ࡯3DJH8S³SUHYLRXVSDJH´ZKHQusing Office application) ࡯&XUVRUė³PRYHFXUVRUOHIW´ZKHQXVLQJ2IILFHapplication) ࡯&XUVRUė³PRYHFXUVRUOHIW´ZKHQusing Office application) ࡯(17(5³HQWHU´ZKHQXVLQJOffice application) ࡯(17(5³HQWHU´ZKHQXVLQJ2IILFHapplication) ࡯&XUVRUā³PRYHFXUVRUULJKW´ZKHQXVLQJ2IILFHapplication) ࡯&XUVRUā³PRYHFXUVRUULJKW´ZKHQusing Office application) ࡯STATUS (display projector status) instant display ࡯࡯ ࡯࡯࡯&XUVRUę³PRYHFXUVRUGRZQ´ZKHQusing Office application) ࡯AUTO ( automatic adjustment of phase, tracking, position) *4 ࡯AUTO ( automatic adjustment of phase, tracking, position) *4 ࡯FM CH - (FM channel down)࡯࡯ ࡯FM CH + (FM channel up)Repeat ࡯࡯ ࡯FM ON/OFF (FM broadcast start/stop)Change multiangle ࡯࡯ ࡯Convenient functionsButton used when adjusting soundRemote control and stand setup
ггBroadcasting sound with FM transmitterUse the “FM transmitter” to broadcast FM signal and play R2-D2 audio through component stereos and FM radios.5GNGEV2TGUU5GNGEV VJG EJCPPGN [QW YKUJ VQ RNC[ CWFKQ QPYKVJ CPF Selected channel will be shown on the indicator and your screen.Change the channel (frequency) of component stereos or FM radios to the channel you are broadcasting from.Pressing switch ON and OFF.POINT Due to the broadcast output power limited by law, the distance from which you can listen at a good sound quality is limited.POINT The speaker sound from R2-D2 is still ON although the FM transmitter is broadcasting. To turn off the sound from R2-D2, refer to page 28 under ‘mute’.Additionalcontrol features of R2-D2CH1 88.1MHzFMUSA / EU / JAPAN CH1 88.1MHzCH2 88.3MHzCH3 88.5MHzCH4 88.7MHzCH5 88.9MHzIndicator Display :Pg.72Projector screenFor the best FM signal reception from an FM transmission signal of R2-D2, use an indoor FM antenna instead of external FM outdoor antenna and/or cable TV line.CautionTurn OFF the SPDIF of DVD when using FM transmitter. Refer to page 69.Caution

Navigation menu