Nikon 1143EA 802.11 b/g Wireless Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	690336
Application ID	9799XA0+CBGqOois52e6tA==
Document Description	Manual Pt4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	221.13kB (2764153 bits)
Date Submitted	2006-08-04 00:00:00
Date Available	2006-08-04 00:00:00
Creation Date	2006-07-11 12:01:53
Producing Software	Acrobat Distiller 6.0.0 for Macintosh
Document Lastmod	2006-07-12 10:02:21
Document Title	untitled

Encryption
Highlight encryption method.
Return to wireless menu (2/2).
Highlight encryption key. Skip Steps 3–5 if
No encryption was selected in Steps 1–2.
Edit encryption key:
• Base 16: press multi selector left or right to
select character, up or down to change. 64bit keys require 10 digits, 128-bit keys 26
digits, TKIP and AES keys 64 digits.
• ASCII : enter key as described on page 26.
64-bit keys are 5 characters long, 128-bit
keys 13 characters long, TKIP and AES keys
8 to 63 characters long.
Return to wireless menu (2/2).
Encryption
The type of encryption available depends on the option selected for Authentication ( 14,
36):
• Open: none, Wep: 64-bit,base 16, Wep: 64-bit,ASCII, Wep: 128-bit,base 16, Wep: 128-bit,ASCII
• Shared: Wep: 64-bit,base 16, Wep: 64-bit,ASCII, Wep: 128-bit,base 16, Wep: 128-bit,ASCII
• WPA-PSK: TKIP, AES
• WPA2-PSK: AES
37
Key index: In infrastructure networks that use WEP encryption,
choose the key index used by the host or access point.
Choose index.
Return to wireless menu (1/2).
TCP / IP
Adjust TCP / IP settings as described on the following pages.
The TCP / IP menu has two pages of options; to scroll between
pages, press the multi selector up or down.
TCP / IP Menu, Page 1/2
Obtain automatically: Highlight this option and press the multi
selector right to toggle it on (✔) or off. Turn this option on if
the wireless network is configured to supply an IP address automatically by DHCP server or Auto IP ( 52). Otherwise turn
it off and enter the address and subnet mask supplied by the
network administrator as described on the following page.
38
1
Highlight Address.
Enter edit mode.
Press multi selector left or right to select,
up or down to change.
Exit to TCP / IP menu (1/2). If subnet mask
is required, proceed to Step 5.
Highlight Mask.
Enter edit mode.
Choose subnet mask.
Exit to TCP / IP menu (1/2).
39
TCP / IP Menu, Page 2/2
Use gateway: Highlight this option and press the multi selector
right to toggle it on (✔) or off. If the network requires a gateway address, turn this option on and enter the address supplied by the network administrator as described below.
Highlight Address.
Press multi selector left or right to select,
up or down to change.
40
Enter edit mode.
Return to TCP / IP menu (2/2).
Enable DNS: Highlight this option and press the multi selector
right to toggle it on (✔) or off. If a Domain Name Server (DNS)
exists on the network, turn this option on and enter the address supplied by the network administrator as described below.
Highlight Address.
Press multi selector left or right to select,
up or down to change.
Enter edit mode.
Return to TCP / IP menu (2/2).
41
FTP
Adjust ftp settings as described on the following pages. The
ftp menu has three pages of options; to scroll between pages,
press the multi selector up or down.
FTP Menu, Page 1/3
Server
Highlight Address.
Display text entry dialog.
Enter server address (required;
35).
Return to ftp menu (1/3).
Highlight Folder.
Display text entry dialog.
Enter destination folder name (
42
35).
Return to ftp menu (1/3).
9
10
Highlight Port.
11
Press multi selector left or right to select,
up or down to change.
Enter edit mode.
12
Return to ftp menu (1/3).
PASV mode: Highlight this option and press the multi selector
right to toggle PASV mode on (✔) or off. Turn this option off
to use normal (PORT) mode. Be sure the server supports PASV
mode before turning this option on.
43
FTP Menu, Page 2/3
Anonymous login: Highlight this option and press the multi selector right to toggle it on (✔) or off. Turn this option on for
anonymous login, off to enter a user name and password as
described below.
Highlight User ID.
Display text entry dialog.
Enter user name (
35).
Return to ftp menu (2/3).
Highlight Password.
Enter password (
44
Display text entry dialog.
35).
Return to ftp menu (2/3). Password is disguised as a row of dots.
FTP Menu, Page 3/3
Use proxy server: Highlight this option and press the multi selector right to toggle it on (✔) or off. If a proxy server is required
for ftp, turn this option on and enter an address and port number as described below.
Highlight Address.
Display text entry dialog.
Enter proxy server address (
35).
Return to ftp menu (3/3).
Highlight Port.
Press multi selector left or right to select,
up or down to change.
Enter edit mode.
Return to ftp menu (3/3).
45
Settings (Transfer Mode Only)
The following settings are available in transfer mode:
Auto Send
Choose whether to upload photographs to the server as they
are taken.
Option
Description
Photos are not automatically uploaded as they are taken.
Off
Photos can be selected for transmission when camera is in
(default)
playback mode.
Photos are uploaded immediately after being recorded to
On
camera memory card.* Be sure memory card is inserted in
camera before shooting.
* Pictures will not be uploaded to the server if Off is selected in the Wireless transmitter > Wireless LAN system menu. Pictures will instead be marked with a “send” indicator as
they are recorded to the memory card.
Delete After Send?
Select Yes to delete photographs from the camera memory
card automatically once upload is complete (the default option is No). Files uploaded before this option was selected are
not affected. Photographs will not be deleted while displayed
in slide shows or in the delete, print set, and preset white balance menus. Sequential file numbering is used while this option is in effect, regardless of the option selected for Custom Setting d6 (File No. Sequence).
Send File As
When uploading NEF + JPEG images to an ftp server, choose
whether to send both NEF (RAW) and JPEG files or only the
JPEG files.
Option
Description
NEF (RAW) + JPEG Upload both NEF (RAW) and JPEG files. JPEG files are
(default)
sent first.
JPEG only
Upload JPEG files only.
46
Send Folder
All files in the selected folder (including those already marked
as “sent”) will be uploaded in ascending order by file number,
beginning when the folder is selected. The folder itself will not
be uploaded. This option is not available when the memory
card contains no folders.
Deselect All?
Select Yes to remove “send,” “sending,” and “sent” marking from
all images on the memory card. Upload of any images marked
with a “sending” icon will immediately be terminated.
Print (Print Mode Only)
Choose a printer from the profile list. Once a connection has
been established, photographs can be printed as described
in “Printing Via Direct USB Connection: Printing Multiple Photographs” in the camera manual. This option is only available
when On is selected for Wireless transmitter > Wireless
LAN system in the camera setup menu. Note that index
printing is only available with the optional PD-10 wireless
printer adapter.
47
Appendices
Creating ftp Profiles Using the Camera Menus
In transfer mode, the camera menus can be used to create ftp profiles in place of
the WT-3 Setup Utility. Before creating an ftp profile with the camera menus, set
the camera USB option to PTP and connect the WT-3. To prevent unexpected loss
of power, be sure the battery is fully charged or use an optional EH-6 AC adapter.
The drain on the battery can be reduced by selecting Off for the Wireless transmitter > Wireless LAN system option in the camera setup menu before adjusting
ftp settings.
Turn the camera on.
Select Transfer mode for Wireless transmitter > Mode ( 34).
A profile list will be displayed showing the connections available in transfer mode. Highlight
FTP registration and press the multi selector to
the right. Note a new ftp profile can not be created if the camera already contains nine profiles; if
necessary, delete a profile using the button.
Firewalls
The WT-3 uses TCP ports 20 and 21 for ftp. It may be necessary to adjust firewall settings
before connecting to a server behind a firewall ( 16).
Using the Menus
If the shutter-release button on the camera or WT-3 is pressed while menus are displayed,
the monitor will turn off and any changes to the current profile will be lost. Do not press the
shutter-release button while editing profiles.
Editing Existing ftp Profiles
See the Menu Guide for information on using the camera menus to edit existing ftp profiles
( 35).
48
4
The registration dialog shown at right will be
displayed. Press the multi selector up or down
to highlight an option, then press to the right to
select. Select Done to proceed to Step 5 when
settings are complete.
Rename: The dialog shown at right will be displayed. Enter a profile name of up to 16 characters as described in “Text Entry” ( 35) and press
the button to return to the registration dialog.
Interface type: The dialog shown at right will be
displayed. Highlight one of the following options
and press the multi selector to the right to return
to the registration dialog.
Option
Description
Wireless & Ethernet
Connect via wireless and/or Ethernet.
(default)
Ethernet only Connect via Ethernet only.
Wireless: If Wireless & Ethernet is selected for
Interface type, select this option to adjust wireless settings as described in the Menu Guide (
35–38). Press the multi selector to the left to return to the registration dialog when settings are
complete.
TCP/IP: Adjust TCP/IP settings as described in the
Menu Guide ( 38–41). Press the multi selector
to the left to return to the registration dialog
when settings are complete.
FTP: Adjust ftp settings as described in the Menu
Guide ( 42–45). Press the multi selector to the
left to return to the registration dialog when settings are complete.
49
5
If On is selected for Wireless transmitter > Wireless LAN system, a confirmation dialog will be displayed. Choose from the following options:
• Yes: Open a connection to the new server and return to the top level of the
wireless transmitter menu.
• No: Return to Step 3 without connecting to the server.
If the wireless transmitter is off, the dialog shown in Step 3 will be displayed
and the WT-3 will not open a connection to the new server.
Errors
An error will be displayed if the new profile does not match server settings. Edit wireless,
TCP/IP, and ftp settings as described in the Menu Guide ( 35).
50
Troubleshooting
Problem
“POWER” LED does not light.
All LEDs blink at once.
Wireless transmitter option
not available.
Excessive radio interference.
Camera displays “Ethernet cable is not connected.”
Camera displays wireless error.
Camera displays TCP/IP or FTP
error.
Memory card error displayed.
Photos can not be transferred to computer to which
PictureProject has been installed.
Transfer interrupted before all
photographs are sent.
Error displayed stating that no
images are available for printing.
Solution
• Confirm that battery is inserted in WT-3 and is fully
charged.
• Reattach WT-3.
• Insert memory card (transfer and print modes
only).
• Turn camera on.
• Press shutter-release button halfway to activate exposure meters.
• Select On for Wireless transmitter > Wireless
LAN system option in camera setup menu.
• Open connection to printer (print mode only).
WT-3 hardware error. Contact a Nikon-authorized
service representative.
• Reattach WT-3.
• Select PTP for USB option in camera setup menu.
Change orientation of camera or antenna.
Connect Ethernet cable or change interface setting
to Wireless & Ethernet.
• Confirm that host and wireless LAN adapter are on.
• Ensure that there are no obstacles between WT-3
and wireless LAN adapter.
• Check settings for host and / or wireless LAN adapter
and adjust camera settings appropriately.
• Check settings for host and / or wireless LAN adapter
and adjust camera settings appropriately.
• Check firewall settings.
Confirm that memory card is properly inserted.
• PictureProject version is incorrect. Update to latest
version or install version supplied with D200.
• Macintosh: If PictureProject was installed after WT-3
Setup Utility, reinstall WT-3 Setup Utility.
Transfer will resume if camera is turned off and then
on again, exposure meters are reactivated, or On for
Wireless transmitter > Wireless LAN system.
Only JPEG images can be printed from the camera.
Transfer RAW (NEF) images to computer and print
them from PictureProject or Nikon Capture version
4.4 or later.
20
18
21, 30
—
—
34
31
25, 29,
31
18
11
4, 13,
49
—
—
14, 35
14, 35
16, 48
21, 30
—
34
—
51
Glossary
Ad-hoc: Devices in an ad-hoc wireless network communicate directly (“peer to peer”), without
a wireless access point.
AES (Advanced Encryption Standard): An encryption standard developed for use by the American
government. AES has been praised for combining strong encryption with rapid processing.
Auto IP (APIPA—Automatic Private IP Addressing): Allows devices in a network to automatically
assign themselves unique IP addresses if no DHCP server is found on the network. Auto IP
uses addresses from 169.254.1.0 to 169.254.254.255 and a subnet mask of 255.255.0.0. These
addresses are neither global nor private but are reserved for Auto IP.
BSS-ID (Basic Service Set ID): All wireless devices on an ad-hoc wireless network share the same
BSS-ID. The BSS-ID may be up to thirty-two characters long and is case sensitive. See also
Ad-hoc.
Channel: When multiple wireless LANs with different ESS-IDs are operating on a single
frequency within a given area, transmission speeds will drop. Specifying a separate channel
(frequency) for each network can prevent interference and increase transmission speeds (note
that all devices in the same network must be set to the same channel). In the IEEE 802.11b/g
standard, the 2.4 GHz band is divided into 14 channels, each separated by 4 MHz.
DHCP (Dynamic Host Configuration Protocol) Server: Each device in a TCP/IP network requires
an IP address. If a DHCP server is present on the network, IP addresses will be assigned
automatically.
DNS (Domain Name Server): A server that contains a database of IP addresses and host names
for the machines it administers and that converts host names to IP addresses in response to
queries from clients. Each DNS can also query other Domain Name Servers for addresses not
listed in its database.
ESS-ID (Extended Service Set ID): Multiple BSSs can be configured to form an ESS, allowing users
to roam between wireless access points. Only devices with the same ESS-ID as a given access
point can communicate with that access point. The ESS-ID may be up to thirty-two characters
long and is case sensitive.
Ethernet: The name given to the IEEE 802.3 LAN standard. Devices in an Ethernet network are
connected via UTP cables for transmission speeds of up to 10 Mbps (10 base-T) or 100 Mbps
(100 base-TX).
Gateway: A network node that acts as an entrance to another network, for example between a
company network and the Internet.
IIS (Internet Information Services): Microsoft’s name for its Web server software. Notable for its
close connection to Windows-based systems through Active Server Pages (ASPs). When
installed as part of the operating system, IIS makes it relatively easy to build web a server.
52
Infrastructure: Devices in an infrastructure network communicate via wireless access points
that may be connected to an Ethernet network, allowing wireless and Ethernet devices to
coexist on a single network.
IP address: The address given to each node in a TCP/IP network. All nodes in a TCP/IP network
must have a unique IP address. Private IP addresses are recommended for nodes that are part
of a local network.
Key index: A number identifying which WEP key is to be used for encryption when
communicating via an access point with more than one WEP key. All devices on the network
must use the same key index.
LAN (Local Area Network): A network of computers located in relatively close proximity to one
another. LANs generally support data transfer speeds of 10–100 Mbps.
MAC (Media Access Control) Address: A unique hardware address for each device on a network,
required when sending and receiving packets.
Open system: The name given to a wireless network using no authentication (open
authentication). Open systems are relatively insecure, as a password is not required to gain
access to the server.
PASV mode: PASV mode is used by clients behind firewalls, when it allows the ftp server to
supply the port number.
Private IP address: An IP address that is only visible within a local network. Because packets using
a private IP address can not be transmitted to another network, they are usually sent between
networks via a proxy server or NAT. Private IP addresses in the range 10.0.0.0–10.255.255.255
are termed “class A.” Class B addresses are in the range 172.16.0.0–172.31.255.255, class C
addresses in the range 192.168.0.0–192.168.255.255. The class of address used depends on
the size of the network. Class C addresses are often used for small networks.
Protocol: A set of rules for passing information back and forth between devices in a network.
By defining such elements of communication as how links are established, how receipt of a
signal is acknowledged, how data are encoded, and how to handle errors, a protocol ensures
that data are transmitted without loss of information.
Proxy: A server that stands between large networks and local networks or computers, typically
to ensure security. One element of a firewall.
PTP-IP (Picture Transfer Protocol over Internet Protocol): A commonly used name for the CIPA DC-0052005 image transfer protocol for transmitting images over LANs. It represents an extension to
the Picture Transfer Protocol (PTP) used to transfer images between cameras and computers
connected via USB cable. The WT-3 uses PTP-IP to communicate with host computers.
Shared key: An authentication system in which WEP keys are used to establish whether a client
has access to the network. Communication is restricted to devices with the same WEP key.
53
SS-ID (Service Set ID): An SS-ID prevents interference between devices in different networks by
allowing communication only between devices that share an SS-ID. See BSS-ID, ESS-ID.
Subnet mask: A mask that divides a network into subnets.
TCP/IP (Transmission Control Protocol/Internet Protocol): A dual protocol consisting of a transportlayer protocol (TCP) that divides data into packets which it later reassembles, and a network
protocol (IP) that handles transmission of the packets between points in the network. It can
be implemented on different platforms, allowing data to be transmitted between machines
with different operating systems.
TKIP (Temporal Key Integrity Protocol): An encryption standard using dynamic WPA-PSK keys that
change periodically or after a specified amount of data have been transmitted, making it
more secure that WEP, which uses fixed keys.
UDP (User Datagram Protocol): A fast but unreliable transport layer transmission protocol using
the OSI model.
USB (Universal Serial Bus): A standard for connecting peripheral devices. USB supports data
transfer rates of up to 480 Mbps (USB 2.0). Devices connected via USB can be connected
and disconnected with the power on (“hot plug”) and do not require separate IRQ (interrupt
request) numbers, preventing conflicts with other devices.
WAN (Wide Area Network): A network connecting computers or LANs in widely separated
locations. The Internet is an example of a WAN.
WEP (Wired Equivalent Privacy): A type of encryption in which the data transmitted between
devices is encoded using a shared encryption key (WEP key).
Wireless LAN access point: A wireless transceiver that acts as the connection between wireless
devices and a wireless network.
WPA-PSK (WiFi Protected Access with Pre-Shared Key): A type of authentication for wireless networks
using previously-established (pre-shared) TKIP or AES keys. Wireless devices using this form of
authentication can only communicate with devices with the same pre-shared key.
54
Specifications
Wireless
Standards IEEE 802.11b/g (standard wireless LAN protocol), ARIB STD-T66
(standard for low power data communications systems)
Communications IEEE 802.11g: OFDM
protocols IEEE 802.11b: DBPSK, DQPSK, CCK
Operating frequency WT-3: 2412–2472 MHz (13 channels)
WT-3A: 2412–2462 MHz (11 channels)
Range (line of sight) Approximately 80 m (262 ft.) with built-in antenna
Approximately 280 m (919 ft.) with WA-E1 extended range antenna
and large antenna at wireless LAN access point
Data rates * IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
IEEE 802.11b: 1, 2, 5.5, and 11 Mbps
Security TKIP, AES, 128/64-bit (104/40-bit) WEP
Access protocols Infrastructure / ad-hoc
Ethernet
Standards IEEE 802.3u (100 base-TX)/IEEE 802.3 (10 base-T)
Data rates 10/100 Mbps with auto detect
Port 100 base-TX/10 base-T (AUTO-MDIX)
Data transfer protocols PTP-IP, ftp
Power consumption 3.5 W maximum
Power source Rechargeable EN-EL3e Li-ion battery × 1 (supplied with D200), EH-6
AC adapter (available separately)
Operating environment Temperature: 0–40 °C (32–131 °F)
Humidity: less than 85% (no condensation)
Weight WT-3: 295 g / 10.4 oz (body only)
WT-3A: 295 g / 10.4 oz (body only)
Dimensions (W × H × D) 152 mm × 110 mm × 72.5 mm (6.0 in. × 4.3 in. × 2.9 in.)
* Maximum logical data rates according to IEEE standard. Actual rates may differ.
55
Battery Life
The number of shots that can be taken with a fully-charged EN-EL3e battery (1500 mAh) varies
with the condition of the batteries, temperature, and how the camera and WT-3 are used.
The following measurements were performed at a temperature of 20 °C (68 °F) both with the
WT-3 off and while uploading photographs to a Windows XP Professional SP2 computer using
Auto send.
Example 1
Network None (WT-3 off ) Wireless (802.11g, infrastructure mode) Ethernet (100 base-TX)
No. of shots
1600
1000
1100
Camera Zoom Nikkor AF-S VR 70–200 mm f/2.8G IF ED lens (VR off ); continuous highsettings speed shooting mode; continuous-servo autofocus; image quality set to JPEG
Basic; image size set to M; shutter speed ½50 s; shutter-release pressed halfway for
three seconds and focus cycled from infinity to minimum range three times with
each shot; after six shots, monitor turned on for five seconds and then turned off ;
cycle repeated after eight seconds.
Example 2
Network None (WT-3 off ) Wireless (802.11g, infrastructure mode) Ethernet (100 base-TX)
No. of shots
300
200
210
Camera Zoom Nikkor AF-S VR 24–120 mm f/3.5–5.6G IF ED lens (VR off ); single-frame
settings shooting mode; single-servo autofocus; image quality set to JPEG Normal; image
size set to L; shutter speed ½50 s; shutter-release pressed halfway for five seconds
and focus cycled from infinity to minimum range once with each shot; built-in
Speedlight fired at full power with every other shot; AF-assist illuminator lights
when Speedlight is used; cycle repeated after eight seconds; camera turned off
for one minute after ten photographs have been transferred.
The following can reduce battery life:
• Using the monitor
• Repeated autofocus operations
• Keeping the shutter-release button pressed • Taking NEF (RAW) photographs
halfway
• Slow shutter speeds
To ensure maximum battery performance:
• Keep the battery contacts clean. Soiled contacts can reduce battery performance.
• Use EN-EL3e batteries immediately after charging. Batteries will lose their charge if left unused.
The battery level displayed by the camera may vary with changes in temperature.
56
Index
Symbols
, 24
Gateway, 15, 40, 52
AC adapter, 20
Access point. See Wireless LAN,
access point
Ad-hoc, 2, 14, 36, 52
Antenna, 4
Auto send, 46
IP address, 15, 38, 53
Infrastructure, 2, 14, 36, 53
BSS-ID, 36, 52
BUSY. See Status LEDs
MAC address, 16
Memory cards, 21, 30
Menus, 34–47, 48–50
entering text in, 35
Mode, 2, 21, 26, 30, 34
Channel, 14, 36, 52
Connecting the WT-3, 18
Delete after send?, 46
Deselect all?, 47
DHCP server, 15, 38, 52
Domain Name Server (DNS), 15,
41, 52
Encryption, 14, 37
key, 14, 37, 54
Errors, 51
ftp, 51
TCP / IP, 51
wireless, 51
ESS-ID, 36, 52
Ethernet, 2, 4, 21, 26, 30, 52
File names, 23, 24, 25
Folders, 15, 42. See also Send
folder
FTP, 42, 49
ftp
errors. See Errors, ftp
server, 2, 3, 15, 21, 35, 48
FTP ERROR. See Errors, ftp
LAN. See Wireless LAN, Ethernet
LED. See Status LEDs
LINK. See Status LEDs
Upload, 21, 23
deleting images after, 46
interrupting, 24
selecting images for, 23
USB, 11
User ID, 44
Wireless, 35, 49
Wireless LAN, 2, 14, 35, 49
access point, 2, 54
Wireless LAN system, 22, 27,
31, 32, 34
Wireless transmitter, 34
WT-3 Setup Utility, 2, 3, 7, 11
Nikon Capture 4, 26, 28
Password, 13
PASV mode, 15, 43, 53
PC mode, 2, 26
PictureProject, 13, 26
Port, 16, 48
POWER. See Status LEDs
Printing, 30
Print mode, 2, 30
Proxy, 15, 45, 53
PTP-IP, 53, 55
Send folder, 47
Send file as, 46
Server. See ftp, server
Settings, 46
SS-ID, 14, 36, 53
Status. See Link quality; Status
LEDs
Status LEDs, 4, 25, 29, 31
TCP/IP, 38, 49
TCP/IP, 15, 38, 49, 54
Transfer mode, 2, 21, 35, 46, 48
57


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2006:07:12 10:02:21+08:00
Create Date                     : 2006:07:11 12:01:53+08:00
Title                           : untitled
Producer                        : Acrobat Distiller 6.0.0 for Macintosh
Page Count                      : 22
Has XFA                         : No
About                           : uuid:8b6bb340-b71f-4f5d-86b2-fe4fc3c2d65f
Mod Date                        : 2006:07:12 10:02:21+08:00
Creation Date                   : 2006:07:11 12:01:53+08:00
Metadata Date                   : 2006:07:12 10:02:21+08:00
Document ID                     : uuid:7e06a69b-5cdc-40dd-879c-43bebe600957
Format                          : application/pdf

EXIF Metadata provided by EXIF.tools