User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2249392 |
| Application ID | yhUAv9yxpI2zHKG7ylOLIQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 13.88kB (173447 bits) |
| Date Submitted | 2014-04-23 00:00:00 |
| Date Available | 2014-04-23 00:00:00 |
| Creation Date | 2014-04-23 09:04:12 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2014-04-23 09:04:12 |
| Document Title | Microsoft PowerPoint - WiMi300.Manual.V1.1.140407(ìˆ˜ì •) [호환 모드] |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Peter Chu |
OEM/I t OEM/Integrators IInstallation t ll ti Manuall Version 1.1 April 07. 2014 This document is confidential and subject to change • • • • • • • • 1 The RF module limited to OEM installation ONLY 1. ONLY. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. 2. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. • • • • • • • • • • • This equipment q p generates uses and can radiate radio frequency y energy gy and,, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna antenna. - Increase the separation between the equipment and receiver. - l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - l Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or ransmitter. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. • • • 2010-01-08 This document is confidential and subject to change • • • • • • • • • • • This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users, and The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. • • • • • End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: ZD7-WiMi300”. The grantee's FCC ID can be used only when all FCC/ IC compliance requirements are met. • • • • Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. • Operations in 5.15-5.25GHz band are for indoor use only. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or colocation with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances,, the OEM integrator will be responsible for re-evaluating g the end p product ((including g the transmitter)) and obtaining a separate FCC authorization. 2010-01-08 This document is confidential and subject to change Features Key Features : • 3x3 antenna Configuration • 802.11n Network Standards (HT 40 only) • Modulation modes: BPSK, QPSK, 16QAM and 64QAM p for easy y set up p and security y configuration • WPS Certified- Wireless Protected Setup • Optimal channel selection and connection management • Seamless channel switch under interference • 40 MHz bandwidth support. • 300MHz PHY Rate Support and STBC Support for Extended Range • Antenna: 3x IPex Connectors (3T/3R) - U.FL U FL • MAC Filtering - No Restriction Mode, White List Mode, Black List Mode; Up to 32 connections • WDS Enables network management units to collect statistics and manage the device remotely • Support Low Power Mode St d d & C Standard Certifications: tifi ti • FCC • RoHS Compliance 2014-04-07 This document is confidential and subject to change Specification Chipset Mac/BB Processor Lantiq PSB8231 RF Chip Lantiq PSB8301 Radio Standards 2009 IEEE 802.11a, IEEE 802.11n Antenna U.FL 3 x Ipex Connectors (3T/3R) RF connector impedance 50 ohm Operating Frequency 802.11n : 5.190 ~ 5.230GHz, 5.755 ~ 5.795GHz Modulation IEEE 802.11n : OFDM C tifi ti Certifications Output Power (Per Antenna @ -25dB EVM) 802.11n HT40 : 5.190 ~ 5.230GHz 17.0 +/- 1dBm (Avg) 5.755 ~ 5.795GHz 25.0 +/- 1dBm (PK) 802.11a 64QAM 5/6 <= -75dBm 802.11a BPSK ½ <= -88dBm Receive Sensitivity (PER <10%) 5/6 / <= -75dBm (@ (@3 antennas)) 802.11n HT40,, 64QAM 802.11n HT20, 64QAM 5/6 <= -78dBm (@3 antennas) 802.11n HT40, BPSK 1/2 <= -92dBm (@3 antennas) 802.11n HT20, BPSK 1/2 <= -94dBm (@3 antennas) Receiver Max Power Sensitivity (PER < 10%) 2014-04-07 -20dBm This document is confidential and subject to change Specification Power Supply Input Voltage / Average Power 3.3V / 5.5W Environmental Output Power (Per Antenna @ -25dB EVM) Temperature Humidity 0 ~ 50 OC 10% to 85% Non-Condensing -20 ~ 85 OC 5% to 90% Non-Condensing Utility Driver Support Linux 2.6.33 Wireless Statistics Link quality, RSSI, noise level packet statistics Dimensions Dimensions(PCBA) 50.95mm x 32 mm Manufacturing compliant Lead-free RoHS 2014-04-07 This document is confidential and subject to change Specification Power Supply Input Voltage / Average Power 3.3V / 5.5W Environmental Output Power (Per Antenna @ -25dB EVM) Temperature Humidity 0 ~ 50 OC 10% to 85% Non-Condensing -20 ~ 85 OC 5% to 90% Non-Condensing Utility Driver Support Linux 2.6.33 Wireless Statistics Link quality, RSSI, noise level packet statistics Dimensions Dimensions(PCBA) 50.95mm x 32 mm Manufacturing compliant Lead-free RoHS 2014-04-07 This document is confidential and subject to change Mechanical Specification PCB Dimension: • Width : 30.0mm • Height : 50.95mm • Thickness : 1.0 mm • PCB Form Factor complied with PCI express Mini Card Electromechanical Specification Rev 1.2(Oct. 26, 2007), Figure 2-3 : Full Mini Card 2014-04-07 This document is confidential and subject to change Pin Out Definitions – 1 of 2 Pi # Pin Name Pi # Pin Name 51 Reserved 52 +3.3V aux 49 Reserved 50 GND 47 Reserved 48 +1.5V 45 Reserved 46 LED_WPAN# 43 GND 44 LED_WLAN# 41 +3.3V aux 42 LED_WWAN# 39 +3.3V 3 3V aux 40 GND 37 GND 38 USB_Dp 35 GND 36 USB_Dn 33 PETp0 34 GND 31 PETn0 32 SMB_DATA 29 GND 30 SMB_CLK 27 GND 28 +1.5V 25 PERp0 26 GND 23 PERn0 24 +3.3V aux 21 GND 22 PERST# 19 Reserved 20 W_DISABLE# 17 Reserved 18 GND Mechanical Key 15 2014-04-07 GND 16 Reserved This document is confidential and subject to change Pin Out Definitions – 2 of 2 2014-04-07 Pin # Name Pin # Name 13 REFCLKp 14 Reserved 11 REFCLKn 12 Reserved GND 10 Reserved CLKREQ# Reserved Reserved +1.5V Reserved GND WAKE# +3.3V aux This document is confidential and subject to change 10 Antenna Spec Manufacturer : Antenna-pro www.antenna-pro.com Model NO. : KMDA5158-06SMA A t Antenna Type : 2 2.4~5.8G 4 5 8G D Duall B Band d WiFi Dipole Di l antenna (4 dBi(2.4 GHz), 7 dBi(5 GHz)) Antenna connect : SMA (Male Rev) 2014-04-07 This document is confidential and subject to change 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2014:04:23 09:04:12+09:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2014:04:23 09:04:12+09:00 Format : application/pdf Creator : Peter Chu Title : Microsoft PowerPoint - WiMi300.Manual.V1.1.140407(수정) [호환 모드] Document ID : uuid:5efb34ba-1ffb-4042-b88f-244d46584ae9 Instance ID : uuid:d975dcb6-fc6d-4dad-b33a-d8c7563e4e94 Page Count : 11 Author : Peter ChuEXIF Metadata provided by EXIF.tools