Ninebot NA2468 Electric Scooter User Manual Segway miniLITE 17 07 07

Ninebot (Changzhou) Tech Co., Ltd. Electric Scooter Segway miniLITE 17 07 07

TempConfidential_2ALS8-NA2468_User Manual_2

USER MANUALwww.segway.com V1.0The manufacturer reserves the right to make changes to the vehicle, release firmware updates, and update this manual at any time. Visit www.segway.com to download the latest user materials and watch the safety video. You must install the App to follow the New Rider Tutorial, activate your miniLITE, and obtain the latest updates and safety instructions. Go to www.segway.com to watch the safety video.Visite www.segway.com para baixar o manual do usuário.
2 Packing List5 Charging4 Assembling Your miniLITE Contents01030405050607097 Learning to Ride9 Features8 Warning3 Diagram1 Riding Safety6 First Ride10 Maintenance13 Trademark and Legal Statement11 Specifications 14131215171812 Certifications14 ContactThanks for choosing the miniLITE!Front BackWARNINGAlways step on/o from the back of the miniLITE.Otherwise you risk falls and/or collisions because the steering direction is reversed.Thanks for choosing the Segway miniLITE(hereinafter referred to as miniLITE). Your miniLITE is both a powerful, remote controlled, electric balancing device and also a personal recreational vehicle.Enjoy the many features of your miniLITE, Your miniLITE is easy and safe to control. Have fun with it!Enjoy your ride!
01 029. Be alert! Scan both far ahead and in front of your miniLITE — your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).10. To reduce risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this document. Do not ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer recommends riders be between the ages of 8-16 years old. Always follow these safety instructions:A. People who should not ride the miniLITE include:i. Anyone under the influence of alcohol or drugs.ii. Anyone who suers from disease that puts them at risk if they engage in strenuous physical activity.iii. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.iv. Anyone whose height or weight is outside the stated limits (see Specifications).v. Pregnant women.B. Riders under the age of 16 years old should ride under adult supervision.C. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.D. To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.E. Do not ride in the snow, in the rain, or on roads which are wet, muddy, icy, or that are slippery for any reason. Do not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a fall.F. Do not accelerate or decelerate suddenly. Do not accelerate when the miniLITE tilts back or sounds an alarm. Do not attempt to override the speed limiter.11. Do not attempt to charge your miniLITE if it, the charger, or the power outlet is wet.12. As with any electronic device, use a surge protector when charging to help protect your miniLITE from damage due to power surges and voltage spikes. Only use the Segway supplied charger. Do not use a charger from any other product.13. Use only Ninebot or Segway approved parts and accessories. Do not modify your miniLITE. Modifications to your miniLITE could interfere with the operation of the miniLITE, could result in serious injury and/or damage, and could void the Limited Warranty.14. Do not sit on the steering bar. Doing so could result in serious injury and/or damage to your miniLITE.1 Riding Safety 1. The miniLITE is a recreational product. Before mastering riding skills, you need to practice. Neither Ninebot (means Ninebot (Beijing) Tech Co., Ltd.and its subsidiaries and aliates) nor Segway Inc. is responsible for any injuries or damage caused by a rider's inexperience or failure to follow the instructions in this document.2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that whenever you ride the miniLITE you risk injury or death from loss of control, collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As with other vehicles, faster speeds require longer braking distance. Sudden braking on smooth surfaces could lead to wheel slip, loss of balance, or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and provides protection for the back of your head.4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other obstacles and potential hazards.5. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Please obey local trac laws and regulations if situation is dierent.6. In places without laws and regulations governing self-balancing electric vehicles, comply with the safety guidelines outlined in this manual. Neither Ninebot Inc. nor Segway Inc. is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations of the safety instructions.7. Do not allow anyone to ride your miniLITE on his/her own unless they have carefully read this manual, watched the safety video, and followed the New Rider Tutorial on the Ninebot by Segway App. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the miniLITE. Make sure each new rider wears a helmet and other protective gear.8. Before each ride check for loose fasteners, damaged components, and low tire pressure. If the miniLITE makes abnormal sounds or signals an alarm, immediately stop riding. Diagnose your miniLITE via the Ninebot by Segway App and call your dealer/distributor for service.
03 04M5 Screws x2 Rubber cap x1 Hex Wrench x1 Valve Stem Extension x 13 DiagramIndicates the remaining battery life. Each block equates to approximately 25% power level. Half of the each block power level is cosumed, this block blinks. When the battery is nearly empty, the last block blinks. The miniLITE will gradually reduce the max speed limit as the power level gradually decreases. Use the App to view the remaining power and estimated remaining range.Charge PortHandle and Knee PadsSteering BarFenderWheelHubcapFoot MatPower ButtonPower ButtonPower ButtonPower LevelPower LevelPower Level2 Packing ListSteering BarMainframeUser MaterialsAccessories BoxAccessories in the BoxCharger, Power CordWhen unpacking your miniLITE, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or nearest service center (see contacts in the user manual). After verifying that all components are present and in good condition, you can assemble your new miniLITE.Please retain the box and packaging materials in case you need to ship your miniLITE in the future.Always power o your miniLITE and unplug the charge cable before assembling, mounting accessories, or cleaning.USER MANUAL LIMITED WARRANTYQUICK STARTTurn ON/OFF. The miniLITE will automatically power OFF when idle for 10 minutes, or when laid down (horizontal) for over 30 seconds.
05 066 First Ride5 Charging Charge port Open the rubber cap Insert the pluginto the socketDo not connect the charger if the charge port or charge cable is wet.Your miniLITE is fully charged when the LED on the charger changes from red (charging) to green (trickle charge). Close the rubber cap when not charging.4 Assembling Your Segway miniLITE1 2 31. Slide the steering bar onto to the mounting bracket. 2. Install the two M5 screws. Tighten securely with the included hex wrench.3. Press the rubber cap onto the steering bar until it snaps in place. There are safety risks when learning to ride the miniLITE. You must read the Safety Instructions and follow the New Rider Tutorial in the App before your first ride.For your safety, your miniLITE is not activated at this time and will beep occasionally after Power ON.Until activated, the miniLITE maintains a very low riding speed and steering sensitivity, and should not be ridden. Install the App on your mobile device (with Bluetooth 4.0 or above), connect to the miniLITE with Bluetooth, and follow the App instructions to activate your miniLITE and follow the training procedures.Scan the QR code to download the App (iOS 8.0 or above, Android™ 4.3 or above).1Install the App and register/login. 2Power ON the miniLITE. 3Click “Vehicle”→“Search device” to connect to your miniLITE. You will hear one sound of beep when the bluetooth connection is successful.Vehicle N Fans Club MeDiscover
07 087 Learning to RideWear an approved helmet and other protective gear to minimize any possible injury.After activation, the App will lead you through the New Rider Tutorial. Please follow the instructions in the App and in this manual. NOTEYou must first download the App on your mobile device. The App will lead you through the New Rider Tutorial. For your safety, the miniLITE will limit the max speed to2.5 mph (4 km/h) until you complete the New Rider Tutorial. For the first 0.6 miles (1 km) after completing the New Rider Tutorial, the max speed will be limited to 6.2 mph (10 km/h), after which you can disable the speed limiter via the App and reach a maximum speed of 10 mph (16 km/h). Go to a large open area and ask a friend to assist you on your first ride. 1 WARNING Always step on/o from the back of the miniLITE. Lightly place one foot on the foot mat, while keeping your other foot on the ground holding your weight. Do not press the steering bar with your leg. 23Slowly transfer your weight onto the miniLITE. The unit will beep, indicating it is now in Balance Mode. Slowly step on with your other foot.Stand with your weight evenly distributed on both feet and relax, looking straight ahead. 4Gently lean your body forward and backward to control your movement. 5To turn, gently lean left or right against the steering bar.6≥ 12 ft. (4 m)≥ 12 ft. (4 m) WARNINGRider must weigh 22–176lbs (10–80 kg)and must be 3'7"–5'11" (110–180 cm) tall.
Avoid contacting obstacles with the tire/wheel. 09 108 Warning0When traversing small bumps or uneven terrain, maintain a moderate speed of 2-6 mph (3-10 km/h) and keep your knees bent. Do not go too slow or too fast; otherwise you may lose control and fall. Watch your head whenpassing through doorways. Avoid slopes steeper than 15° . Do not ride through puddles or other bodies of water. Do not get wet.Do not ride on public roads, motorways, highways, or streets.Do not accelerate when the miniLITE tilts back or sounds an alarm. Do not attempt to override the speed limiter.Do not accelerate or decelerate abruptly. Do not lean more than 5° or accelerate/decelerate fasterthan 2.5 mph/s (4 km/h/s). The miniLITE is for one rider only. Do not ride double or carry any passengers. Do not carry a child. Do not ride over holes, curbs, steps, or other obstacles.You must read and understand the Warnings and Safe Riding instructions in this manual before attempting to ride the miniLITE Failure to follow these warnings could result in death or serious injury due to: loss of balance, traction, and/or control; collisions; and falls.Do not rock back and forth or shift your weight abruptly. 15°
11 129 FeaturesLiftingPower Assist ModeWarning When your miniLITE is powered on, but no rider is standing on it, it is in Power Assist Mode. Steer the miniLITE across smooth surfaces using the steering bar. Do not guide it up stairs, across potholes, over large cracked/uneven surfaces, or over other obstacles; guide your miniLITE around the obstacle or carry it over the obstacle as shown above.Do not attempt stunts ofany kind. Always keep both feet on the foot mats.Maintain contact with theground at all times. Do not jump or attempt stunts.Do not ride on low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice). For your safety, motor power is cut o when the miniLITE is lifted o the ground in Balance Mode. When the miniLITE is put back down it will begin balancing again. Use the App to enable or disable this feature. Lift safely via the steering bar as shown above.Do not lift the miniLITE by the fenders or mainframe; you risk pinching or injuring your fingers/hands.You must read and understand the Warnings and Safe Riding instructions in this manual before attempting to ride the miniLITE. Failure to follow these warnings could result in death or serious injury due to: loss of balance, traction, and/or control; collisions; and falls. WARNING
13 14.10 Maintenance 11 SpecificationsCleaning and Storing Your miniLITEUse a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth. Scratches on plastic parts can be polished with extra fine grit abrasive paper.NOTEDo not wash your miniLITE with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your miniLITE. Do not wash your miniLITE with a power washer or high pressure hose. WARNINGMake sure the miniLITE is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise you may expose yourself to electric shock or damage the electronic components.Store your miniLITE in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.Tire PressureInflate tires to 45–50 psi. Inflate both tires equally.Battery Pack MaintenanceDo not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not discard or destroy the battery. For more battery information, refer to the sticker on the battery itself, located on the bottom of the miniLITE. Refer to your local laws and regulations regarding battery recycling and/or disposal.A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises. More details are available in the App.NOTETypically, a fully charged battery should retain charge for 120-180 days in Standby Mode. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage caused by over-discharge or under-discharge will not be covered by the Limited Warranty. WARNINGDo not attempt to disassemble the battery. Risk of fire. No user serviceable parts. WARNINGDo not ride when the ambient temperature is outside the machine operation temperature(see Specifications) because low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.Item N4M160 ParametersDimensions Unit Approx. 25.6lbs (11.6 kg)Approx. 10 miles (16 km)10° @ 70kg payload 15° @ 80kg payload3’7”–5’11” (110–180 cm)Approx. 10 mph (16 km/h)Top speed varies to adapt dierent riding manner and remaining battery life. Top speed will reduce when remaining battery life drops.Weight PayloadNetRider Recommended AgeRequired HeightMachine ParametersMax. SpeedTypical Range 1Max. SlopeBatteryMotorsCharge Time21.6×11.1×22.5 in (548×281×571 mm)22–176 lbs (10–80 kg)6–16 years, ref to the bodyweight limitPavement, packed dirt, slopes < 10°, obstacles < 0.4 in (1 cm),gaps < 1.2 in (3 cm)Traversable TerrainOperating TemperatureStorage TemperatureIP RatingNominal VoltageMax. Charging VoltageCharging TemperatureNominal CapacityContinuous Discharge Power 2Battery Management SystemNominal PowerMax. Power14–104°F (-10–40°C)-4–122°F (-20–50°C)Mainframe IP54/ Battery pack IP6632–104°F (0–40°C)36 V DC42 V DC155 Wh1147 WOver-voltage, under-voltage, short circuit, and over-heatingprotection. Auto-sleep and auto-wake.700×2 W350×2 WApprox. 3 hours[1] Typical Range: tested while riding under full power, 132 lbs (60 kg) load, 77°F (25°C), 6-8 mph (10-13 km/h) average speed on pavement.[2] Continuous Discharge Power: tested while under full power at 77°F (25°C). The value changes with temperature and remaining battery capacity. For example, the continuous discharge power drops to ~80% of the maximum value at 10% remaining battery capacity, and the continuous discharge power drops to ~70% of the maximum value at 32°F (0°C).
15 1632–104°F (0–40°C)ChargerOutput PowerInput VoltageOutput VoltageOutput CurrentCharging Temperature71 W100-240 VAC @ 50/60 Hz42.0VDC1.7 A European Union Compliance StatementBattery recycling information for the European UnionBatteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive.In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential eects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances.Restriction of Hazardous Substances Directive (RoHS)Ninebot products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”).This product has been tested and passed ANSI/CAN/UL-2272 certified.The battery complies with UN/ DOT 38.312 CertificationsRadio and Telecommunications Terminal Equipment DirectiveEuropean Union Contact Address:EU Contact Address for regulatory topics only: Hogehilweg 8, 1101CC, Amsterdam, The NetherlandsHereby, Ninebot (Tianjin) Tech Co., Ltd, declares that the wireless equipment listed in this section are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent is otropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. User manuals for transmitters equipped with detachable antennas shall also contain the following notice in a conspicuous location: This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. IMPORTANT NOTE: Radiation Exposure Statement:
This equipment complies with “Industry Canada RSS-102 for radiation exposure limits set forth for an uncontrolled environment”. environnement non contrôlé. aux rayonnements IC établies pour un Cetéquipementestconforme aux limitesd'exposition Déclarationd'exposition aux radiations:003 du Canada.-la norme NMBest conform àppareilnumérique de la classe BCetaIndustrie Canada.la Réglementationd’003. Avis de Conformité à -This Class B digital apparatus complies with Canadian ICESstatementEmissions compliance –Industry Canada
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
17 18Segway is a trademark of Segway Inc., registered in the U.S. and other countries; Segway miniLITE, miniLITE and Ninebot by Segway are trademarks of Segway Inc.; Ninebot is a trademark of Ninebot (Tianjin) Tech Co. Ltd., registered in the U.S. and other countries; Android, Google Play and the Google Play logo are trademarks of Google Inc.; Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. The respective owners reserve the rights of their trademarks referred to in this manual.The miniLITE is covered by relevant patents. For patent information go to http://www.segway.com.Ninebot (Tianjin) Tech Co. Ltd. manufactures and sells the miniLITE under a license from DEKA Products Limited Partnership.We have attempted to include descriptions and instructions for all the functions of the miniLITE at the time of printing. However, your miniLITE may dier slightly from the one shown in this document. Visit the Apple App Store (iOS) or the Google Play Store (Android) to download and install the App.Please note that there are multiple Segway and Ninebot by Segway models with dierent functions, and some of the functions mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and functionality of the miniLITE product and documentation without prior notice.© 2017 Ninebot (Beijing) Tech Co. Ltd. All rights reserved.13 Trademark and Legal Statement14 Contact Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your miniLITE.Americas:Segway Inc.14 Technology Drive, Bedford, NH 03110, USATel : 1-603-222-6000Fax: 1-603-222-6001Toll Free: 1-866-473-4929E-mail Sales: customeroperation@segway.comE-mail Service: technicalsupport@segway.comWebsite: www.segway.comEurope, Middle East and Africa:Segway Europe B.V.Hogehilweg 8, 1101CC, Amsterdam, The NetherlandsEmail service: service@segway.eu.comWebsite: www.segway.comHave your Segway miniLITE's serial number on hand when contacting Segway.You can find your serial number on the skid plate on the underside of your miniLITE or in the App under More Settings –> Basic Information.

Navigation menu