Ninebot NA2468 Electric Scooter User Manual Segway miniLITE 17 07 07
Ninebot (Changzhou) Tech Co., Ltd. Electric Scooter Segway miniLITE 17 07 07
Ninebot >
TempConfidential_2ALS8-NA2468_User Manual_2
USER MANUAL The manufacturer reserves the right to make changes to the vehicle, release firmware updates, and update this manual at any time. Visit www.segway.com to download the latest user materials and watch the safety video. You must install the App to follow the New Rider Tutorial, activate your miniLITE, and obtain the latest updates and safety instructions. www.segway.com V1.0 Go to www.segway.com to watch the safety video. Visite www.segway.com para baixar o manual do usuário. Thanks for choosing the miniLITE! Contents 1 Riding Safety 01 2 Packing List 03 3 Diagram 04 4 Assembling Your miniLITE 05 5 Charging 05 6 First Ride 06 7 Learning to Ride 07 8 Warning 09 9 Features 12 10 Maintenance 13 11 Specifications 14 12 Certifications 15 13 Trademark and Legal Statement 17 14 Contact 18 Thanks for choosing the Segway miniLITE(hereinafter referred to as miniLITE). Your miniLITE is both a powerful, remote controlled, electric balancing device and also a personal recreational vehicle. Enjoy the many features of your miniLITE, Your miniLITE is easy and safe to control. Have fun with it! Enjoy your ride! Front Back WARNING Always step on/off from the back of the miniLITE. Otherwise you risk falls and/or collisions because the steering direction is reversed. 1 Riding Safety 1. The miniLITE is a recreational product. Before mastering riding skills, you need to practice. Neither Ninebot (means Ninebot (Beijing) Tech Co., Ltd.and its subsidiaries and affiliates) nor Segway Inc. is responsible for any injuries or damage caused by a rider's inexperience or failure to follow the instructions in this document. 2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that whenever you ride the miniLITE you risk injury or death from loss of control, collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As with other vehicles, faster speeds require longer braking distance. Sudden braking on smooth surfaces could lead to wheel slip, loss of balance, or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas. 3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and provides protection for the back of your head. 9. Be alert! Scan both far ahead and in front of your miniLITE — your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice). 10. To reduce risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this document. Do not ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer recommends riders be between the ages of 8-16 years old. Always follow these safety instructions: A. People who should not ride the miniLITE include: i. Anyone under the influence of alcohol or drugs. ii. Anyone who suffers from disease that puts them at risk if they engage in strenuous physical activity. iii. Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance. iv. Anyone whose height or weight is outside the stated limits (see Specifications). v. Pregnant women. B. Riders under the age of 16 years old should ride under adult supervision. 4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other obstacles and potential hazards. C. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws. D. To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others. 5. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Please obey local traffic laws and regulations if situation is different. 6. In places without laws and regulations governing self-balancing electric vehicles, comply with the safety guidelines outlined in this manual. Neither Ninebot Inc. nor Segway Inc. is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations of the safety instructions. 7. Do not allow anyone to ride your miniLITE on his/her own unless they have carefully read this manual, watched the safety video, and followed the New Rider Tutorial on the Ninebot by Segway App. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the miniLITE. Make sure each new rider wears a helmet and other protective gear. 8. Before each ride check for loose fasteners, damaged components, and low tire pressure. If the miniLITE makes abnormal sounds or signals an alarm, immediately stop riding. Diagnose your miniLITE via the Ninebot by Segway App and call your dealer/distributor for service. 01 E. Do not ride in the snow, in the rain, or on roads which are wet, muddy, icy, or that are slippery for any reason. Do not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a fall. F. Do not accelerate or decelerate suddenly. Do not accelerate when the miniLITE tilts back or sounds an alarm. Do not attempt to override the speed limiter. 11. Do not attempt to charge your miniLITE if it, the charger, or the power outlet is wet. 12. As with any electronic device, use a surge protector when charging to help protect your miniLITE from damage due to power surges and voltage spikes. Only use the Segway supplied charger. Do not use a charger from any other product. 13. Use only Ninebot or Segway approved parts and accessories. Do not modify your miniLITE. Modifications to your miniLITE could interfere with the operation of the miniLITE, could result in serious injury and/or damage, and could void the Limited Warranty. 14. Do not sit on the steering bar. Doing so could result in serious injury and/or damage to your miniLITE. 02 2 Packing List Steering Bar 3 Diagram User Materials USER MANUAL Handle and Knee Pads QUICK START Steering Bar LIMITED WARRANTY Fender Power Level Power Level Accessories Box Power Button Foot Mat Mainframe Power Button Charge Port Accessories in the Box M5 Screws x2 Rubber cap x1 Hex Wrench x1 Valve Stem Extension x 1 Wheel Hubcap Charger, Power Cord Power Button Turn ON/OFF. The miniLITE will automatically power OFF when idle for 10 minutes, or when laid down (horizontal) for over 30 seconds. Indicates the remaining battery life. Each block equates to approximately 25% power level. Half of the each block power level is cosumed, this block blinks. When the battery is nearly empty, the last When unpacking your miniLITE, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or nearest service center (see contacts in the user manual). After verifying that all components are present and in good condition, you can assemble your new miniLITE. Power Level block blinks. The miniLITE will gradually reduce the max speed limit as the power level gradually decreases. Use the App to view the remaining power and estimated remaining range. Please retain the box and packaging materials in case you need to ship your miniLITE in the future. Always power off your miniLITE and unplug the charge cable before assembling, mounting accessories, or cleaning. 03 04 4 Assembling Your Segway miniLITE 6 First Ride 1. Slide the steering bar onto to the mounting bracket. For your safety, your miniLITE is not activated at this time and will beep occasionally after Power ON. 2. Install the two M5 screws. Tighten securely with the included hex wrench. Until activated, the miniLITE maintains a very low riding speed and steering sensitivity, and should not be ridden. Install the App on your mobile device (with Bluetooth 4.0 or above), connect to the miniLITE with Bluetooth, and follow the App instructions to activate your miniLITE and follow the training procedures. 3. Press the rubber cap onto the steering bar until it snaps in place. There are safety risks when learning to ride the miniLITE. You must read the Safety Instructions and follow the New Rider Tutorial in the App before your first ride. Scan the QR code to download the App (iOS 8.0 or above, Android™ 4.3 or above). 5 Charging Do not connect the charger if the charge port or charge cable is wet. Charge port Open the rubber cap Insert the plug into the socket Install the App and register/login. Click “Vehicle”→“Search device” to connect to your miniLITE. You will hear one sound of beep when the bluetooth connection is successful. 2 Power ON the miniLITE. Vehicle N Fans Club Discover Me Your miniLITE is fully charged when the LED on the charger changes from red (charging) to green (trickle charge). Close the rubber cap when not charging. 05 06 7 Learning to Ride WARNING Rider must weigh 22–176lbs (10–80 kg) and must be 3'7"–5'11" (110–180 cm) tall. After activation, the App will lead you through the New Rider Tutorial. Please follow the instructions in the App and in this manual. NOTE You must first download the App on your mobile device. The App will lead you through the New Rider Tutorial. Wear an approved helmet and other protective gear to minimize any possible injury. For your safety, the miniLITE will limit the max speed to 2.5 mph (4 km/h) until you complete the New Rider Tutorial. For the first 0.6 miles (1 km) after completing the New Rider Tutorial, the max speed will be limited to 6.2 mph (10 km/h), after which you can disable the speed limiter via the App and reach a maximum speed of 10 mph (16 km/h). 3 Slowly transfer your weight onto the miniLITE. The unit will beep, indicating it is now in Balance Mode. Slowly step on with your other foot. 4 Stand with your weight evenly distributed on both feet and relax, looking straight ahead. 5 Gently lean your body forward and backward to control your movement. 6 To turn, gently lean left or right against the steering bar. ≥ 12 ft. (4 m) ≥ 12 ft. (4 m) Go to a large open area and ask a friend to assist you on your first ride. WARNING Always step on/off from the back of the miniLITE. 07 2 Lightly place one foot on the foot mat, while keeping your other foot on the ground holding your weight. Do not press the steering bar with your leg. 08 8 Warning You must read and understand the Warnings and Safe Riding instructions in this manual before attempting to ride the miniLITE Failure to follow these warnings could result in death or serious injury due to: loss of balance, traction, and/or control; collisions; and falls. Avoid contacting obstacles with the tire/wheel. When traversing small bumps or uneven terrain, maintain a moderate speed of 2-6 mph (3-10 km/h) and keep your knees bent. Do not go too slow or too fast; otherwise you may lose control and fall. Do not ride on public roads, motorways, highways, or streets. Do not accelerate when the miniLITE tilts back or sounds an alarm. Do not attempt to override the speed limiter. Do not accelerate or decelerate abruptly. Do not lean more than 5° or accelerate/decelerate faster than 2.5 mph/s (4 km/h/s). 15° Watch your head when passing through doorways. 09 Avoid slopes steeper than 15° . Do not ride through puddles or other bodies of water. Do not get wet. The miniLITE is for one rider only. Do not ride double or carry any passengers. Do not carry a child. Do not ride over holes, curbs, steps, or other obstacles. Do not rock back and forth or shift your weight abruptly. 10 Warning You must read and understand the Warnings and Safe Riding instructions in this manual before attempting to ride the miniLITE. Failure to follow these warnings could result in death or serious injury due to: loss of balance, traction, and/or control; collisions; and falls. 9 Features Lifting For your safety, motor power is cut off when the miniLITE is lifted off the ground in Balance Mode. When the miniLITE is put back down it will begin balancing again. Use the App to enable or disable this feature. Lift safely via the steering bar as shown above. WARNING Do not lift the miniLITE by the fenders or mainframe; you risk pinching or injuring your fingers/hands. Do not attempt stunts of any kind. Always keep both feet on the foot mats. Maintain contact with the ground at all times. Do not jump or attempt stunts. Do not ride on low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice). Power Assist Mode When your miniLITE is powered on, but no rider is standing on it, it is in Power Assist Mode. Steer the miniLITE across smooth surfaces using the steering bar. Do not guide it up stairs, across potholes, over large cracked/uneven surfaces, or over other obstacles; guide your miniLITE around the obstacle or carry it over the obstacle as shown above. 11 12 10 Maintenance 11 Specifications Cleaning and Storing Your miniLITE Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth. Scratches on plastic parts can be polished with extra fine grit abrasive paper. Dimensions NOTE Do not wash your miniLITE with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your miniLITE. Do not wash your miniLITE with a power washer or high pressure hose. Weight Rider WARNING Make sure the miniLITE is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise you may expose yourself to electric shock or damage the electronic components. Machine Parameters Tire Pressure Inflate tires to 45–50 psi. Inflate both tires equally. A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). Battery range will recover when temperature rises. More details are available in the App. NOTE Typically, a fully charged battery should retain charge for 120-180 days in Standby Mode. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record the charge-discharge condition of the battery; damage caused by over-discharge or under-discharge will not be covered by the Limited Warranty. WARNING Do not attempt to disassemble the battery. Risk of fire. No user serviceable parts. WARNING Do not ride when the ambient temperature is outside the machine operation temperature(see Specifications) because low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls. 13 N4M160 Parameters 21.6×11.1×22.5 in (548×281×571 mm) Payload 22–176 lbs (10–80 kg) Net Approx. 25.6lbs (11.6 kg) Recommended Age 6–16 years, ref to the bodyweight limit Required Height 3’7”–5’11” (110–180 cm) Approx. 10 mph (16 km/h) Max. Speed Store your miniLITE in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life. Battery Pack Maintenance Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not discard or destroy the battery. For more battery information, refer to the sticker on the battery itself, located on the bottom of the miniLITE. Refer to your local laws and regulations regarding battery recycling and/or disposal. Item Unit Battery Typical Range 1 Approx. 10 miles (16 km) Max. Slope 10° @ 70kg payload Traversable Terrain Pavement, packed dirt, slopes < 10°, obstacles < 0.4 in (1 cm), gaps < 1.2 in (3 cm) Operating Temperature 14–104°F (-10–40°C) Storage Temperature -4–122°F (-20–50°C) 15° @ 80kg payload IP Rating Mainframe IP54/ Battery pack IP66 Charge Time Approx. 3 hours Nominal Voltage 36 V DC Max. Charging Voltage 42 V DC Charging Temperature 32–104°F (0–40°C) Nominal Capacity 155 Wh Continuous Discharge Power Motors Top speed varies to adapt different riding manner and remaining battery life. Top speed will reduce when remaining battery life drops. 1147 W Battery Management System Over-voltage, under-voltage, short circuit, and over-heating protection. Auto-sleep and auto-wake. Nominal Power 350×2 W Max. Power 700×2 W [1] Typical Range: tested while riding under full power, 132 lbs (60 kg) load, 77°F (25°C), 6-8 mph (10-13 km/h) average speed on pavement. [2] Continuous Discharge Power: tested while under full power at 77°F (25°C). The value changes with temperature and remaining battery capacity. For example, the continuous discharge power drops to ~80% of the maximum value at 10% remaining battery capacity, and the continuous discharge power drops to ~70% of the maximum value at 32°F (0°C). 14 Charger Radio and Telecommunications Terminal Equipment Directive Output Power 71 W Input Voltage 100-240 V AC @ 50/60 Hz Output Voltage 42.0V DC Output Current 1.7 A European Union Contact Address: Charging Temperature 32–104°F (0–40°C) EU Contact Address for regulatory topics only: Hogehilweg 8, 1101CC, Amsterdam, The Netherlands Hereby, Ninebot (Tianjin) Tech Co., Ltd, declares that the wireless equipment listed in this section are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. 12 Certifications This product has been tested and passed ANSI/CAN/UL-2272 certified. The battery complies with UN/ DOT 38.3 European Union Compliance Statement Battery recycling information for the European Union Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive. In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances. Restriction of Hazardous Substances Directive (RoHS) Ninebot products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”). 15 16 IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent is otropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. User manuals for transmitters equipped with detachable antennas shall also contain the following notice in a conspicuous location: This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with “Industry Canada RSS-102 for radiation exposure limits set forth for an uncontrolled environment”. Déclarationd'exposition aux radiations:Cetéquipementestconforme aux limitesd'exposition aux rayonnements IC établies pour un environnement non contrôlé. Industry Canada – Emissions compliance statement This Class B digital apparatus complies with Canadian ICES -003. Avis de Conformité à la Réglementationd’ Industrie Canada. Cetappareilnumérique de la classe B est conform à la norme NMB -003 du Canada. Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. 14 Contact Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your miniLITE. Americas: Segway Inc. 14 Technology Drive, Bedford, NH 03110, USA Tel : 1-603-222-6000 Fax: 1-603-222-6001 Toll Free: 1-866-473-4929 E-mail Sales: customeroperation@segway.com E-mail Service: technicalsupport@segway.com Website: www.segway.com 13 Trademark and Legal Statement Segway is a trademark of Segway Inc., registered in the U.S. and other countries; Segway miniLITE, miniLITE and Ninebot by Segway are trademarks of Segway Inc.; Ninebot is a trademark of Ninebot (Tianjin) Tech Co. Ltd., registered in the U.S. and other countries; Android, Google Play and the Google Play logo are trademarks of Google Inc.; Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. The respective owners reserve the rights of their trademarks referred to in this manual. Europe, Middle East and Africa: Segway Europe B.V. Hogehilweg 8, 1101CC, Amsterdam, The Netherlands Email service: service@segway.eu.com Website: www.segway.com Have your Segway miniLITE's serial number on hand when contacting Segway. You can find your serial number on the skid plate on the underside of your miniLITE or in the App under More Settings –> Basic Information. The miniLITE is covered by relevant patents. For patent information go to http://www.segway.com. Ninebot (Tianjin) Tech Co. Ltd. manufactures and sells the miniLITE under a license from DEKA Products Limited Partnership. We have attempted to include descriptions and instructions for all the functions of the miniLITE at the time of printing. However, your miniLITE may differ slightly from the one shown in this document. Visit the Apple App Store (iOS) or the Google Play Store (Android) to download and install the App. Please note that there are multiple Segway and Ninebot by Segway models with different functions, and some of the functions mentioned herein may not be applicable to your unit. The manufacturer reserves the right to change the design and functionality of the miniLITE product and documentation without prior notice. © 2017 Ninebot (Beijing) Tech Co. Ltd. All rights reserved. 17 18
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 14 XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Format : application/pdf Title : Segway miniLITE说明书 17.07.07 改 Metadata Date : 2017:07:07 19:41:25+08:00 Modify Date : 2017:08:29 22:41:47+08:00 Create Date : 2017:07:07 19:41:25+08:00 Creator Tool : Adobe Illustrator CC 2015 (Macintosh) Thumbnail Width : 56 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 5752 bytes, use -b option to extract) Instance ID : uuid:4c0dc9d7-7ced-ef49-a64d-cd37736d5200 Document ID : xmp.did:c58c30c8-6d26-4812-9650-eda623af2074 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:731ac721-d0bc-7b4d-8581-9a807e6e15a1 Derived From Document ID : xmp.did:c38d897d-a583-49fb-8205-cf9da3a9806a Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:0180117407206811822AF26916C968E1, xmp.iid:c58c30c8-6d26-4812-9650-eda623af2074 History When : 2015:08:31 10:02:27+08:00, 2017:07:07 19:41:21+08:00 History Software Agent : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CC 2015 (Macintosh) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 280.000816 Max Page Size H : 140.000073 Max Page Size Unit : Millimeters Font Name : BentonSans-Medium, BentonSansCond-Book, BentonSans-Regular, BentonSansLight, CenturyGothic, Helvetica-Light, AdobeSongStd-Light, FZLTXHJW--GB1-0, FZLTXHK, HYSWLongFangSong, SimHei, Geogrotesque-Regular Font Family : BentonSans, BentonSans Cond Book, BentonSans Regular, BentonSansLight, Century Gothic, Helvetica, Adobe 宋体 Std, 方正兰亭纤黑简体, 方正兰亭细黑_GBK, 汉仪长仿宋体, 黑体, Geogrotesque Regular-GBpc-EUC-H Font Face : Medium, Regular, Regular, Regular, Regular, Light, L, Regular, Regular, Regular, Regular, Regular-GBpc-EUC-H Font Type : Open Type, Open Type, Open Type, Open Type, TrueType, TrueType, Open Type, TrueType, TrueType, TrueType, Open Type, Unknown Font Version : Version 1.0, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;Core 1.0.38, Version 1.000;PS 001.000;hotconv 1.0.38, Version 2.35, 10.0d4e1, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, 1.00, Version 1.00, Version 3.53, Version 5.01, Version 2.001 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False Font File Name : BentonSans-Medium_0.otf, BentonSans Cond Book.otf, bentonsansregular.otf, BentonSansLight.otf, Century Gothic, Helvetica.dfont, AdobeSongStd-Light.otf, FZLTXHJW.TTF, 兰亭细黑 GBK.TTF, 汉仪长仿宋.ttf, SimHei.ttf, Geogtq-Rg.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 1505 C, PANTONE Cool Gray 11 C, PANTONE Cool Gray 9 C, PANTONE 100 C Swatch Group Name : 默认色板组, 灰色, 明亮 Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, PANTONE 1505 C, PANTONE Cool Gray 9 C, PANTONE Cool Gray 5 C, PANTONE Black C, PANTONE 476 C, PANTONE Cool Gray 7 C, PANTONE Process Black C, PANTONE Cool Gray 8 C, AutoCAD Color 3, AutoCAD Color, AutoCAD Color 9, AutoCAD Color 2, PANTONE 100 C, PANTONE Cool Gray 11 C, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Lab, Lab, Lab, Lab, Lab, Lab, CMYK, Lab, CMYK, CMYK, CMYK, CMYK, Lab, Lab, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 15.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 20.000000, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000000, 10.000000, 0.000000, 25.000000, 40.000000, 50.000000, 55.000000, 25.000000, 30.000000, 35.000000, 40.000000, 40.000000, 50.000000, 0.000000, 0.000000, 92.971700, 57.424301, 28.540474, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 10.000000, 15.000000, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000000, 40.000000, 50.000000, 60.000000, 65.000000, 70.000000, 70.000000, 0.000000, 96.020401, 87.972802, 48.407701, 22.384985, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000000, 10.000000, 90.000000, 90.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000000, 25.000000, 0.000000, 0.000000, 35.000000, 50.000000, 20.000000, 40.000000, 50.000000, 60.000000, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 0.000000, 94.604403, 89.019603, 45.474899, 21.448080, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003100 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 5.000000, 25.000000, 40.000000, 0.000000, 10.000000, 25.000000, 35.000000, 50.000000, 70.000000, 100.000000, 0.000000, 79.998499, 0.003100, 0.000000, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 29.998800, 19.999700, 9.999100, 4.998800, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003100 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant L : 66.274498, 50.196098, 72.549004, 17.254900, 25.490200, 63.137299, 57.647099, 92.156898, 36.470600 Swatch Colorant A : 59, 0, 0, 1, 11, 0, 0, -8, 0 Swatch Colorant B : 93, -2, 0, 3, 13, -1, -2, 66, -3 Producer : Adobe PDF library 15.00 Creator : Adobe Illustrator CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools