Ningbo Fancier Photographic Equipment WI710 IQ Motion Gimbal User Manual 1
Ningbo Fancier Photographic Equipment Co.,Ltd. IQ Motion Gimbal 1
Contents
- 1. Users Manual
- 2. user manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4123434 |
| Application ID | KJvFuAt0XM5iB269shw8Aw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 451.03kB (5637919 bits) |
| Date Submitted | 2018-12-29 00:00:00 |
| Date Available | 2018-12-29 00:00:00 |
| Creation Date | 2018-12-28 16:14:33 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2018-12-28 17:04:06 |
| Document Title | 未命å -1 |
| Document Creator | CorelDRAW X6 |
| Document Author: | Administrator |
\ F WEIFENG Wingho Fancier Photographic Equipment Co.,Ltd. Addto.1230 South Cihal Road,Luotuo Street,Zhonhai Ditrict, Ningbo,Zheiiang,China 315202 Tess—74—ss881615 E—maikisales@welfengchina.com waw weifengchina.com Made i China \VFWEIFENG Wi—710 User Guide —— www.weifengchina.com ——— Contents Packing List Disclaimer and Warning Stabiizer Introduction Charging the Batteries Installation Balance Adjustment Control Panel Introduction Introducing Gimbal Control Modes APP Download and Installation APP Operations Calibration and Firmware Upgrade Product Specification Warranty Card o2 os 10 12 15 18 21 23 24 so as 36 as Packing ist The product package comes with the following items. in case that any item is found missing, please contact Weifeng or your local selling agent 9—Axis Camera Stabilzer x _! [ 18650 Li—ion Battery ( ) xa _! Quick Release Pate xi _] Helghton Plate xi _! Type—c Cable x1 C~I) Sony Gamera Gontrol Gable xd _! Storago Caso xi _] — L— Z—p Z—D L— Mancal Tised xt _! 18650%4 Li—ion Battery Charger x1 _! Shoulder Strap xi _] Accessories x1 _! , Ganon Camera Gontrol Cable xi Panasonic Camera Controi Cable . x1 _! UserGuide . x1 Disclaimor and Warning Disclaimer and Warning Disclaimer and Warning WARNING Thank you for using Weifeng Wi—710. The information contains herein affects your safety and your legalrights and responsibifties. Read this entire document carefully to ensure proper configuration before use. Falure to read and folow the instructions and warnings herein may result in serious injury to you or bystanders, or damage to your davice or property. Walfeng reserves the right of final explanation for this document and allrelevant documents relating to Wi—710, and the right to make changes at any time without notico. Please visit www weifengchina.com for the latest product information By using this product, you hereby signify that you have read this document carefulyy and that you understand and agree to abide by the terms and conditions herein You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purpose that are proper and in accordance with allterms, precautions, practices, policies and guidalines Weifeng has made and may make available Weifeng accapts no iabilty for damage, injury or any legal responsibilty incurred directly or indirectly from the use of this product. Users shall observe safe and lawful practices including, but not Imited to, those set forth herein WEF is the trademark of NINGBO WEIFENG IMAGE EQUIPMENT GROUP 00 , LTD (hereinafterreferred to as "Waifeng‘) and its subsidiaries. Allproduct names or marks referred to hereunder are trademarks or registered trademarks of their respective holders Glossary The following terms are used throughout the product iterature to incicate various levels of potential harm when operating this product, WARNING: Procedures, which it not properly followed, may incur property damage, grave accident, or serious injury. CAUTION: Procedures, which if not properly followed, may incur property damage and serious injury. NOTICE: Procedures, which if not properly followed, may incur property damage or minor injury. This is a sophisticated product. It must be operated with caution and common sense and requires some basic mechanical abilty. Please read the ENTIRE User Guide to become familar with the features of this product before operating. Fallure to operate the product correctly can result in damage to the product or personal property and cause serious injury. This product is not intended for use by children without direct adult supervision. D0 NOT use with incompatible components or in any way otherwise as mentioned orinstructed in the product documents provided by Weifeng. The safety guidelinas herein contain instructions for safety operation and maintenance. ts essential to read and follow allof the instructions and warnings in the User Guide, prior to assembly, setup or use, in order to aperate the product correctly and avoid damage or serious injury FOC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to Part 15 of the FOC Rules, These Imits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation ifthis equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ——Reorient or relocate the receiving antenna. ——Increase the separation between the equipment and recaiver. ——Connect the equipment into an outlet on a cirouit different from that to which the receiver is connected ——Consult the daler or an experienced radio/TV technician for help. Disclaimor and Warning Safety Operation Guide Disclaimer and Warning Battery Safety Guidelines CAUTION 1.Wi—710 s a high—precision control device. Damage may be caused to Wi—710 if itis dropped or subject to external force, and this may resultin maifunction 2.Make sure the rotation of the gimbal axes is not blocked by external force when Wi—710 is turned on. 3.Wi—710 is not waterproof. Prevent contacts of any kind of iquid or cleaner with Wi—710. Itis recommended to use soft dry cloth for cleaning 4.Protect Wi—710 from dust and sand during use warning To avoid fire, serious injury, and property damage, observe the following safety guidelines when using, charging, or storing your batteries Battery Safety Guidelines 1,Prevent the product to come into contact with any kind of iquid. Do not leave the product in the rain or near a source of moisture. Do not drop the product into water If the inside of the battery comes into contact of water, chemical decompo sition may occur, potentiall resuting in the battery catching on fire, and may even lead to explosion 2. f the battery fall nto water with the stabiizer during use, take it out immediately and put it in a safe and open area. Maintain a safe distance from the battery unti it is completely dry. Never use the battery again, and dispose of the battery property as described in the Battery Disposa! section below © 3. Ifthe product catches fre, use water, water spray, sand, fire blanket, dry powder or carbon dioxide fire extinguisher immediately to put out the fire. Please extinct the fire by applying the methods recommended above according to the actual situation 4. Never use non—Weifeng batteries.Ifreplacement or backup is needed, please purchase new batteries from weifeng‘s official website or authorized channels. Welfeng takes no responsibilty for any damage caused by non—Weifeng batteries 5. Never use or charge swollen, loaky, or damaged batteries. Never use or charge ifthe battery smells, or overheats (exceeding maxmum temperature of 160°F/71°C) If your batteries are abnormal, contact Weifeng or a Weifeng authorized dealer for further assistance 8. The battery should be used with the temperature range from —10°C to 50°C Use the battery in environments above 50°C can lead to a fre or explosion. Use of battery below —10°C can lead to serious battery damage 7. Do not use the battery in strong electrostatic or electromagnatic environments Otherwise, the battery protection board may maifunction 8. Do not disassemble or use any sharp object to puncture the battery in any way. Otherwise, the battery may leak, catch fire or explode 9. Do not mechanically strike, erush, or throw the product. Do not place heavy objects on the product 10. Electrolytes inside the battery are highly corrasive. in case of accident contact of any electrolytes with your skin or eyes,rinse immadiately with water for at least 15 minutes and seek madical advise as soon as possible 11. Do not use the battery ifit has been involved in a crash or heave impact 12. Do not heat the product and never put the product in a microwave oven or in a pressurized container. 13. Do not place the battery cell on a conductive surface (such as a matal desk surface) 14. Prevent use of wires or other metal objects that could cause positive and negative short—cirouit to the battery. Disclaimor and Warning Battery Safety Guidelines Disclaimer and Warning Battery Storage 15. Ifthe battery terminal is dirty, wipe it with a clean, dry cloth. Otherwise it will cause a bad battery connection, which may resultin energy loss or charging fallure. Battery Charging to prevent over—discharge of battery which may resul in battery damage and permanent fallure Battery Maintenance 1. Do not attach the batterias to a wall outlet or car charger socket directly. Always use a Weifeng approved adapter for charging. Weifeng takes no responsibilty ifthe battery is charged using a non—Weifeng charger. 2. Do not put the battery and charger near flammable materials or on flammable surfaces (such as carpet or wood). Never leave the battery unattached during charging to prevent any accident 3. Do not charge the battery immediately after use, because the battery temperature may be too high. Do not charge the battery untilit cools down to normal room temperature. Charging the battery with its temperature over 40°C or lwer than —15°0 may lead to leakage, overheating, or damago 4. Examine the charger before use, make sure there is no damage to the enclosure, cord, plug, or other parts. Never use a damaged charger. Do not clean the charger with any liquid containing aloohol or other flammable solvents. Disconnect the charger when not in use Battery Storage 1.Keep batteries out of the reach of chidren and pets 2. Do not leave the product near heat sources such as a furnace or heater, or nside ofavehicle on hot days. Never expose the productin any environment with temperature of over 80°C. The ideal storage temperature is 22°C—28°C 3. Store batterios in a dry environment 4. Do not leave the battery unused for too long afterit has been completely discharged 1. Never use the battery when the temperature is too high or too low 2. Do not store the battery in any environment with a temperature of over 60°C Battery Disposal Dispose of the battery in specifc reeycling boxes only after a complete discharge Do not put away the battery in regular trash containers. Strictly follow your local regulations regarding the disposal and recycing of batteries Stabilizor Introduction Stabiizer Introduction 3—Axis Camera Stabilizer Wi—710 Interface Description Output Voltage Output Current Port Function Note ss———i 1 Battery compartment button 2.Control Panel (see more on Page 13) 3.Pan Axis Motor 4.Pan Axis Thumb Scrow 5.Camera Gontrol interface 6.Camera Plattorm 7.Mounting Plate Thumb Screw 8 Safety Lock 9.Roll Axis Motor «—alell 10.Roll Axis Thumb Screw 11.Tit Axis Motor 12.Tt Axis Thumb Screw 13.Lens Support 14.Thumb Screw 15.Plate Base Thumb Screw 16.Typo—C Expansion Port 17.Expansion Port 18:Type—C Fimware Upgrade Port Type—C Firmware Upgrade port Type—© Expansion Port . Camera Controlintertace . V 2A TA The Type—C Firmware Upgrade port canonly be used for firmware \ upgrade, and can neither be used for power input nor output The Type—CExpansionPort can be used for charging Follow Foous Motor and cameras like Canon 5D \ series (Accessories like FolowFocuswil continue to be updated) 1. The camera control interface is connectable to camera control eable ©anon.Nikon (see more on page 15— andPanasonic Weteng Camera Gontrol cameras do CGable Description) not support 2. tcanalsobe usedasa USBcharging USB enargingort forSony mirroriess cameras.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Administrator Title : 未命名 -1 Create Date : 2018:12:28 16:14:33+08:00 Creator Tool : CorelDRAW X6 Modify Date : 2018:12:28 17:04:06+08:00 Metadata Date : 2018:12:28 17:04:06+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Document ID : uuid:d5c0567e-fcd2-4102-8aed-fb44025801b2 Instance ID : uuid:666a608f-b4bc-4465-8fa2-6cdc0883d0ab Page Count : 6 Author : AdministratorEXIF Metadata provided by EXIF.tools