No Wires Needed 10310308 Wireless LAN transceiver User Manual INFORMATION TO USER
No Wires Needed Wireless LAN transceiver INFORMATION TO USER
Contents
Extract from users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 145579 |
| Application ID | /KAm6hdfRIo6dNpSoVb5Ew== |
| Document Description | Extract from users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 1.11kB (13856 bits) |
| Date Submitted | 2001-04-19 00:00:00 |
| Date Available | 2001-04-19 00:00:00 |
| Creation Date | 2001-04-17 09:49:38 |
| Producing Software | Acrobat Distiller 4.05 for Windows |
| Document Lastmod | 2001-04-17 09:50:10 |
| Document Title | INFORMATION TO USER |
| Document Creator | Microsoft Word 9.0 |
| Document Author: | yekkey |
FCC Information to user This product does not contain any user serviceable components and is to be used with approved antennas only. Any unauthorized product changes or modifications will invalidate manufacturer’s warranty and all applicable regulatory certifications and approvals. To assure continued compliance, any changes or modifications not explicitly approved by the manufacturer could void the user's authority to operate this equipment and the company’s warranty. FCC Radiation Exposure Statement This device generates and radiates radio-frequency energy. In order to comply with FCC radiofrequency radiation exposure guidelines for an uncontrolled environment, this equipment should be installed and operated with a minimum distance of 20cm (8 Inches) between your body and the antenna. Warning: It is the responsibility of the professional installer to ensure that when using the outdoor antenna kits in the United States (or where FCC rules apply), only the antennas mentioned in this manual are used. The use of any antenna other than those listed is expressly forbidden in accordance with the FCC rules CFR47 part 15.204. Note: Detached antennas, whether installed indoors or out, should be installed ONLY by experienced antenna installation professionals who are familiar with local building and safety codes and, wherever applicable, are licensed by the appropriate government regulatory authorities. Failure to do so may void the No Wires Needed Product Warranty and may expose the end user to legal and financial liabilities. No Wires Needed and its resellers or distributors are not liable for injury, damage or violation of government regulations associated with the installation of detached antennas. FCC Electronic Emission Notices This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Export restrictions: This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. Notice for Canada Low Power License-Exempt Radiocommunication Devices (RSS-210) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired opera-tion of the device. Remarque relative aux communications radio Canada Permis d'émission à faible puissance - Cas des appareils de communications radio (CNR-210) Le fonctionnement de ce type d'appareil est soumis aux deux condi-tions suivantes : (1) Cet appareil peut perturber les communications radio, et (2) cet appareil doit supporter toute perturbation, y compris les perturbations qui pourraient provoquer un dysfonctionnement. Industry Canada Class B Emission Compliance Statement This Class B digital apparatus complies with Candian ICES-003. Avis de conformité à la règlementation d'Industrie Canada Cet appareil numérique de la classe B est conform à la norme NMB-003 du Canada.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Producer : Acrobat Distiller 4.05 for Windows Creator : Microsoft Word 9.0 Modify Date : 2001:04:17 09:50:10+02:00 Author : yekkey Title : INFORMATION TO USER Create Date : 2001:04:17 09:49:38 Page Count : 2 Page Mode : UseNoneEXIF Metadata provided by EXIF.tools