No Wires Needed 10310308 User Manual 110
No Wires Needed 110
Contents
Pelican Hub Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 66111 |
| Application ID | s2R4UXIpm1E5LVS3Of919w== |
| Document Description | Pelican Hub Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 16.9kB (211247 bits) |
| Date Submitted | 1999-10-23 00:00:00 |
| Date Available | 1999-11-05 00:00:00 |
| Creation Date | 0000-00-00 00:00:00 |
| Producing Software | Acrobat PDFWriter 3.02 for Windows |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | 110.PDF |
| Document Creator | Microsoft Word |
| Document Author: | Unknown |
No Wires Needed Pelican 1100 WLAN Hub User Manual Version 2.1.1 – October 1999 User manual Pelican 1100 WLAN Hub No Wires Needed Jan Steenlaan 3-5 3723 BS Bilthoven The Netherlands www.nwn.com Version 2.1.1 – October 1999 Trade marks Copyright © No Wires Needed The publisher reserves the right to revise this publication and to make changes to any or all parts of this manual at any time, without obligation to notify any person or entity of such revisions or changes. Swallow, Parrot, Pelican, AirLock, APCenter, ASBF and Connect are trademarks of No Wires Needed. Other product and company names are registered trademarks or trademarks of their respective holders. Copyright statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the prior writing of the publisher. Printed in Amsterdam, October 1999 Free Repair Period NWN undertakes a Free Repair Period of 12 months from the date of Invoice. Within the Free Repair Period NWN repairs a faulty device free of charge or replaces it in case of irreparable damage. Excluded from the Free Repair Period are malfunctions caused by operation outside the intended usage; by misuse or abuse; by service modifications or repairs performed by unauthorised persons or by other conditions not arising from defects in Product materials or workmanship. The costs associated with physically replacing the defective part and reinstalling are to be borne by the Buyer. Statement of Year 2000 Compliance Detailed information about our statement is published on our website. http://www.nwn.com FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with the minimum distance between your body, excluding hands, wrists, feet and ankles, and the antenna as shown in the table below: WLAN Hubs which use the attached low gain indoor antennas (1.9dBi) 20cm (7 inches) Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. No Wires Needed Parrot, Pelican, WBS, WBC 1100 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE No Wires Needed Contents Contents ..............................................................................................9 Introduction ........................................................................................10 Configuring the Pelican.......................................................................11 3.1 Installation of configuration software............................................11 3.2 Give the Pelican an IP-address ...................................................12 3.2.1 Selecting a network .............................................................14 Connection the devices ......................................................................15 4.1 Connect one device to the Pelican...............................................15 4.2 Connect 2-4 devices to the Pelican..............................................16 4.3 Continue installation....................................................................17 4.3.1 Resetting the Pelican...........................................................18 Technical specifications Pelican 1100 .................................................19 5.1 Standards supported...................................................................19 5.2 Environmental ............................................................................19 5.3 Power specifications ...................................................................19 5.4 Radio specifications ....................................................................19 5.5 Specific features .........................................................................20 5.6 Physical Dimensions...................................................................20 User Manual Pelican 1100 WLAN Hub Page 9 of 9 No Wires Needed 2 Introduction Thank you for purchasing your No Wires Needed Pelican 1100 WLAN Hub. This manual will assist you with the installation procedure. The package you have received should contain the following items: • • • • User manual Pelican 1100 WLAN Hub Power adapter Diskettes containing PConfig™ Software Note: if anything is missing, please contact your vendor Page 10 of 10 Pelican 1100 WLAN Hub User Manual No Wires Needed 3 Configuring the Pelican The Pelican should be configured before it is actually installed. The settings contain the following parameters: • IP address • Network name • Community string (password) • Lock (remote management on/off) First install Pconfig from the diskette that is shipped with the Pelican. 3.1 Installation of configuration software To install the PConfig program, insert disk 1 into your local disk drive and run the PConfig setup.exe. The set-up wizard will guide you through the installation process. Figure 3.1 Select the directory you want to install PConfig in. Start the PConfig program after completion of the installation. User Manual Pelican 1100 WLAN Hub Page 11 of 11 No Wires Needed 3.2 Give the Pelican an IP-address The following settings should be done: • IP address • Network name • Community string (password) • Lock (remote management on/off) Therefore you should connect the Pelican directly to a computer were Pconfig is running on. Either use a cross cable, or a standard hub to accomplish this. Note: You should not attach the Pelican to the same wired backbone were the Access Points are connected to. This will result in a not-ending loop, and can cause network problems. After starting Pconfig the following screen will appear. Page 12 of 12 Pelican 1100 WLAN Hub User Manual No Wires Needed Select ‘Set a fixed IP address’. Then enter the MAC address and the IP address manually. The MAC Address can be found at the backside of the Pelican. Press Apply. You are now enabled to fill in the System name, System Location and Contact Info. These fields are not mandatory; the information is useful when using several Pelicans in a more complex environment. Place your cursor behind the field you wish to change. User Manual Pelican 1100 WLAN Hub Page 13 of 13 No Wires Needed 3.2.1 Selecting a network Selecting the Session tab will enable you to join a specific wireless network. Press “Leave” and then “Rescan” to get an overview of all the available networks, thereafter select the appropriate network and press “Join”. You are now ready to connect your Pelican to the Ethernet device or to the standard hub where the four devices are connected to. Note: If you are using DHCP on your network, follow this extra step Check the box “Use DHCP or BOOTP to obtain an IP-address” and press “Apply”. Note: The IP address previously entered will remain in the “IP address or DNS name” box, even when DHCP or BOOTP is selected. Page 14 of 14 Pelican 1100 WLAN Hub User Manual No Wires Needed 4 Connection the devices Note: The Pelican 1100 WLAN Hub is equipped with one RJ45 connector. Use a cross-cable if you only connect one device to the Pelican 1100 WLAN Hub. If you want to connect four devices, be advised to use a normal standard hub connected to the Pelican and the four devices. 4.1 Connect one device to the Pelican 1. Place your Pelican 1100 WLAN Hub next to your device that should be connected to it. 2. Make sure the antennas are in a vertical position (if not, rotate over 90 degrees). 3. Insert the power connector. 4. Attach the UTP Ethernet CROSScable directly to the device. 5. Switch on the Pelican WLAN Hub. Continue to Chapter 4.3 User Manual Pelican 1100 WLAN Hub Page 15 of 15 No Wires Needed 4.2 Connect 2-4 devices to the Pelican Place your Pelican 1100 WLAN Hub next to the standard Hub. 1. Make sure the antennas are in a vertical position (if not, rotate over 90 degrees). 2. Insert the power connector. 3. Attach the UTP Ethernet cable to the standard Hub. 4. Connect the devices to the standard Hub. 5. Switch on the Pelican WLAN Hub. Continue to chapter 4.3 Page 16 of 16 Pelican 1100 WLAN Hub User Manual No Wires Needed 4.3 Continue installation At the front of the Pelican WLAN Hub you will see three LEDs. If all goes well, the rightmost LED (power) is green and the leftmost (WLAN) and middle (wired network) LEDs flash whenever there is traffic on the respective networks which is at least ten times per second for the wireless LAN because of so-called ‘beacons’. The WLAN Hub automatically selects the medium attached. When no devices are detected, the network LED will turn red. When the supplied power is too low or unstable the power LED will turn red. The power LED will also turn red when the firmware of the Pelican WLAN Hub has a fault condition. Installation completed. User Manual Pelican 1100 WLAN Hub Page 17 of 17 No Wires Needed 4.3.1 Resetting the Pelican You can reset the Pelican WLAN Hub’s settings to factory defaults by pushing a paperclip in the little hole next to the power switch while switching the Pelican WLAN Hub on. When you push a paperclip in the reset hole while the Pelican WLAN Hub is switched on, only the lock set by PConfig™ is deactivated. Page 18 of 18 Pelican 1100 WLAN Hub User Manual No Wires Needed 5 Technical specifications Pelican 1100 5.1 Standards supported − Compliant with ETS 300 328 and ETS 300 826 (CE marked) − IEEE 802.11 standard for Wireless LAN − All major networking standards (including IP, IPX) 5.2 Environmental Operating temperature (ambient): − 0°C to 40°C (32°F to 104°F) Humidity: − 10% to 90% 5.3 Power specifications DC power supply − In 230 VAC 50 Hz 150 mA − Out 9 VDC 1.3 A Parrot Access Point − In 9 VDC 1 A 5.4 Radio specifications Range: − per cell indoors approx. 50 meters (150 ft) or more − per cell outdoors up to 300 meters (1000 ft) Transmit power: − +18 dBm Frequency range: − 2.4-2.4835 GHz, direct sequence spread spectrum Number of Channels: − Europe: 13 (3 non-overlapping) − US: 11 (3 non-overlapping) − France: 4 (1 non-overlapping) Antenna system: − Dual antenna diversity system; 2dB gain User Manual Pelican 1100 WLAN Hub Page 19 of 19 No Wires Needed 5.5 Specific features Supported bit rates: 11 Mbps 5.5 Mbps 1 Mbps (IEEE 802.11 DSSS compliant devices, using ASBF™ ) 2 Mbps (IEEE 802.11 DSSS compliant devices, using ASBF™ ) Data encryption: − AirLock™ security, 128-bit key length Utility Software: − PConfig™ configuration tool Key Management: − Automatic Dynamic Key Allocation (ADKA) through public key − − − − 5.6 Physical Dimensions 180 x 220 x 40 mm Page 20 of 20 Pelican 1100 WLAN Hub User Manual No Wires Needed User Manual Pelican 1100 WLAN Hub Page 21 of 21 No Wires Needed Page 22 of 22 Pelican 1100 WLAN Hub User Manual No Wires Needed User Manual Pelican 1100 WLAN Hub Page 23 of 23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 24 Creator : Microsoft Word Create Date : Sunday 10 October 1999 16:39 Title : 110.PDF Author : Unknown Producer : Acrobat PDFWriter 3.02 for Windows Subject :EXIF Metadata provided by EXIF.tools