Nokia Bell G241W-A GPON ONU User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2688980
Application ID	mgRTeDBLeThjeajo5g8txw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	251.35kB (3141881 bits)
Date Submitted	2015-07-23 00:00:00
Date Available	2015-07-24 00:00:00
Creation Date	2015-07-03 14:43:56
Producing Software	Acrobat Elements 10.0.0 (Windows)
Document Lastmod	2015-07-03 14:43:56
Document Title	7368_ISAM_ONT_G-241W-A_Product_Information_Guide.book
Document Creator	FrameMaker 11.0.2
Document Author:	inberlja

1—
G-241W-A unit data sheet
1.1 G-241W-A part numbers and identification
1.2 G-241W-A general description
1-2
1-3
1.3 G-241W-A software and installation feature support
1.4 G-241W-A interfaces and interface capacity
1.5 G-241W-A LEDs
1-4
1-6
1.6 G-241W-A detailed specifications
1.7 G-241W-A GEM ports and T-CONTs
1-8
1-9
1.8 G-241W-A performance monitoring statistics
1.9 G-241W-A functional blocks
1-9
1-11
1.10 G-241W-A standards compliance
1-14
1.11 G-241W-A special considerations
1-14
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1-4
1-1
1 — G-241W-A unit data sheet
1.1
G-241W-A part numbers and identification
Table 1-1 provides part numbers and identification information for G-241W-A
indoor ONTs.
Table 1-1 G-241W-A indoor ONT part numbers and identification
Mnemonic
G-241W-A
Ordering kit
part number
Provisioning
part number
Description
CLEI
CPR
ECI/
Bar
code
3FE 56867 AA
3FE 56977 AA
Package D 2 POTS ports, 4 Gig-E
10/100/1000 Base-T interfaces, 1 RF
video connector, and 1 Wi-Fi radio
on/off switch. Includes ac/dc power
cord with European (EU) variant plug.
—
—
—
3FE 56977 BA
Package D 2 POTS ports, 4 Gig-E
10/100/1000 Base-T interfaces, 1 RF
video connector, and 1 Wi-Fi radio
on/off switch. Includes ac/dc power
cord with European (EU) variant plug.
—
—
—
Package D 2 POTS ports, 4 Gig-E
10/100/1000 Base-T interfaces, 1 RF
video connector, and 1 Wi-Fi radio
on/off switch. Includes ac/dc power
cord with European (EU) variant plug.
—
—
—
3FE 56867 CA
Package D 2 POTS ports, 4 Gig-E
10/100/1000 Base-T interfaces, 1 RF
video connector, and 1 Wi-Fi radio
on/off switch. Includes ac/dc power
cord with United Kingdom (UK) variant
plug.
—
—
—
3FE 56867 DA
Package D 2 POTS ports, 4 Gig-E
10/100/1000 Base-T interfaces, 1 RF
video connector, and 1 Wi-Fi radio
on/off switch. Includes ac/dc power
cord with United States (US) variant
plug.
—
—
—
3FE 56867 DB
Package D 2 POTS ports, 4 Gig-E
10/100/1000 Base-T interfaces, 1 RF
video connector, and 1 Wi-Fi radio
on/off switch. Includes ac/dc power
cord with United States (US) variant
plug.
—
—
—
customerspecific
3FE 56867 BA
3FE 56867 BB
customerspecific
Also includes POTS LED and Molex port
The G-241W-A ONT uses a fiber storage tray that can be ordered separately. The
part number for the fiber tray is 3FE 71441 AA.
Table 1-2 lists ONT to UPS or power adapter support mapping, including the
specifications and standards tested to.
1-2
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1 — G-241W-A unit data sheet
Table 1-2 ONT to UPS or power adapter compatibility support
Power/UPS model
Power UPS and cabling part
number information
Customer category or
country compliance tested
for
Notes
Common European Union
countries
Battery not included.
ANSI municipality United
States and Canada
•
•
G-241W-A GPON indoor ONTs
CyberPower
CSN27U12V3
(1) 12 V/27 W UPS part number:
3MV00213AA (DC power cord
included)
Grounded
(2) AC power cord, 1AB38334xxxx:
•
•
•
•
1.2
0007 — Australia, New Zealand
0008 — Europe
0009 — United Kingdom,
Ireland
0010 — ANSI
Compliant battery models:
BB Battery BP7.2-12
GS Battery PE 12V7.2
(ANSI GS Battery ALU
part number
1AF17581AC)
G-241W-A general description
G-241W-A indoor ONTs provide the subscriber interface for the network by
terminating the PON interface and converting it to user interfaces that directly
connect to subscriber devices. The ONT is compatible with all existing subscriber
equipment, including analog phones with both tone and rotary dial capabilities,
cordless phones, modems, fax machines, and caller ID boxes (Type I, Type II, and
Type III).
G-241W-A indoor ONTs provide the following functions:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
four configurable 10/100/1000BASE-T Ethernet interfaces using RJ-45 ports
two POTS interfaces using RJ-11 ports
single mode fiber (SC/APC connector)
one coaxial RF video connector
two USB ports
detachable 3dB/5dB antenna
IEEE 802.11 b/g/n Wi-Fi interface to enable wireless access
adjustable Wi-Fi power
fully G.984 series GPON standard compliant
G984.5 standard compliant
compliance with FCC part 15 Class B, CE
VPN pass-through for PPTP, L2TP, and IPsec
mapping VLAN to each Ethernet port
Layer 2 bridging
NAT/NAPT/port forwarding/DMZ
IGMP v2/v3
IPv4 and IPv6
QoS: CoS or DSCP
RSSI support
manual addition of DDNS server
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1-3
1 — G-241W-A unit data sheet
TR-069 support for reading optical parameters
The ONT supports the reading of optical parameters via TR-069:
•
•
•
•
•
laser bias current
voltage
temperature
received signal levels
lower thresholds
These are the same optical parameters supported in the GUI. For more information,
see the chapter “Configure a G-241W-A indoor ONT”.
1.3
G-241W-A software and installation feature support
For information on installing or replacing a G-241W-A, see:
• Install a G-241W-A indoor ONT
• Replace a G-241W-A indoor ONT
For information on the following topics, see the 7368 ISAM ONT Product Overview
Guide:
•
•
•
•
•
•
•
•
•
1.4
ONT and MDU general descriptions of features and functions
Ethernet interface specifications
POTS interface specifications
RF video interface specifications for video overlay
RSSI specifications
Wi-Fi specifications
ONT optical budget
SLID entry via Ethernet port
Web-based ONT configuration
G-241W-A interfaces and interface capacity
Table 1-3 describes the supported interfaces and interface capacity for G-241W-A
indoor ONTs.
Table 1-3 G-241W-A indoor ONT interface connection capacity
ONT type
and model
G-241W-A
1-4
(1)
Maximum capacity
POTS
10/
100
BASET
10/
100/
1000
BASET
RF
video
(CATV)
MoCA
VDSL2
E1/T1
Local
craft
GPON
SC/
APC
HPNA
USB
—
—
—
—
—
—
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1 — G-241W-A unit data sheet
Note
(1)
G-241W-A ONTs provide Wi-Fi service without a physical connection.
G-241W-A connections and components
G-241W-A indoor ONTs are intended for indoor deployment and can be installed
vertically, horizontally, or attached to a wall.
Other features of these indoor ONTs include
•
•
•
•
•
an ON/OFF power switch for manual shut down
a reset button
an external multi-directional antennae
Wi-Fi service that is enabled and disabled by Web GUI or TR-064/TR-069
a Wi-Fi Protected Setup button
Figure 1-1 shows the physical connections for G-241W-A indoor ONTs.
Figure 1-1 G-241W-A indoor ONT physical connections
Reset
button
Wi-Fi
POTS
Protected
ports
Service button (RJ-11)
Ethernet
ports
(RJ-45)
Fiber
Power
optic connector
connector
F-type
Power
coaxial
on/off
switch connector
22788
Figure 1-2 shows the location of the USB ports on the G-241W-A indoor ONTs.
Figure 1-2 G-241W-A indoor ONT physical connections (USB host ports)
USB port
22788
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1-5
1 — G-241W-A unit data sheet
Table 1-4 describes the physical connections for G-241W-A indoor ONTs.
Table 1-4 G-241W-A indoor ONT physical connections
Connection
(1)
Description
Ethernet ports
This connection is provided through Ethernet RJ-45 cables. Up to four
10/100/1000 Base-T Ethernet interfaces are supported.The Ethernet
ports can support both data and in-band video services on all four
interfaces.
POTS
This connection is provided through RJ-11 ports. Up to two POTS
connections are supported.The POTS ports support voice services.
WPS button
The Wi-Fi Protected Setup switch is labeled WPS. This button enables
and disables the WPS mode.
RF video coaxial
This connection is provided through a F-Type coaxial connector.
Power
This connection is provided through the power connector. A power
cable fitted with a Molex connector is used to make the connection.
Fiber optic
This connection is provided through a GPON SC/APC fiber optic
connector.
USB ports
This connection is provided by two USB host ports, compliant to USB
2.0.
Cables with A-type connectors are used to connect to the USB ports.
Note
(1)
1.5
The primary path for the earth ground for these ONTs is provided by the 12V Return signal in the
power connector.
G-241W-A LEDs
Figure 1-3 shows the G-241W-A indoor ONT LEDs.
1-6
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1 — G-241W-A unit data sheet
Figure 1-3 G-241W-A indoor ONT LEDs
POWER
LINK
AUTH
LAN1
LAN2
LAN3
POWER
LINK
AUTH
LAN4
LAN1
LAN2
LAN3
LAN4
TEL1
TEL1
TEL2
VoIP
WPS
WLAN
TEL2
USB
INTERNET
VoIP
WPS
WLAN
USB
INTERNET
24510
Table 1-5 provides LED descriptions for G-241W-A indoor ONTs.
Table 1-5 G-241W-A indoor ONT LEDs
Indicator
Power
LED color and
behavior
LED behavior description
Green solid
Power on
Red solid
Light failed on startup (for example corrupt flash), or self test failed on startup,
or self test failed during regular operation or when executed over OMCI
Off
The LED is red by default until the software is running properly and turns it green
Power off
Link
Auth
Green solid
GPON link between ONT and OLT is operating normally
Off
GPON link is down or no link connected
Green solid
ONT is authorized
Green flashing
In process of ranging or synchronizing on OMCI
Off
ONT is not authorized
(1 of 2)
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1-7
1 — G-241W-A unit data sheet
Indicator
LED color and
behavior
LED behavior description
LAN 1 to 4
Green solid
Ethernet is linked
Green flashing
LAN activity is present (in either direction)
Off
ONT power off or Ethernet not connected
TEL 1 to 2
VOIP
WPS
WLAN
USB
INTERNET
Green solid
Off hook
Green flashing
Call in or talking
Off
On hook
Green solid
VOIP service is OK
Off
VOIP service is not OK
Green solid
Wireless LAN link is up
Green flashing
Wireless LAN link activity
Off
Wireless LAN link down or no link connected
Green solid
Wireless enabled
Green flashing
Traffic on wireless interface
Off
Wireless is down or no link connected
Green solid
At least one USB device is connected
Green flashing
Traffic activity on at least on USB device
Off
No USB device connected
Green solid
HSI WAN is connected: a) the device has an IP address assigned from IPCP, DHCP,
or static, and no traffic has been detected; b) the session is dropped due to idle
timeout but the PON link is still present.
Green flashing
VIDEO
PPPoE or DHCP connection in progress
Off
HSI WAN is not connected: a) there is no physical interface connection; b) the
device is in bridged mode without an assigned IP address; c) the session has been
dropped for reasons other than idle timeout.
Green
-6 to 0 dBm
Red
Less than -6 dBm
(2 of 2)
1.6
G-241W-A detailed specifications
Table 1-6 lists the physical specifications for G-241W-A indoor ONTs.
Table 1-6 G-241W-A indoor ONT physical specifications
Description
Specification
With fiber tray
Length
8.9 in. (22.5 cm)
8.9 in. (22.5 cm)
Width
6.5 in. (16.6 cm)
6.5 in. (16.6 cm)
Height
1.65 in. (4.2 cm)
2.0 in. (5.2 cm)
Weight including [within ± 0.5 lb
(0.23 kg)]
1.12 lb (510 g)
1.3 lb (590 g)
Table 1-7 lists the power consumption specifications for G-241W-A indoor ONTs.
1-8
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1 — G-241W-A unit data sheet
Table 1-7 G-241W-A indoor ONT power consumption specifications
Mnemonic
Maximum power
(Not to exceed)
Condition
Minimum power
Condition
G-241W-A
18 W
2 POTS off-hook, 4 Gig-E, 1 RF
video, Wi-Fi operational
6W
2 POTS on-hook, other
interfaces/services not
provisioned
Table 1-8 lists the environmental specifications for G-241W-A indoor ONTs.
Table 1-8 G-241W-A indoor ONT environmental specifications
Mounting method
Temperature range and humidity
Altitude
Desk or wall
mounted
Operating:
Contact your Alcatel-Lucent technical support
representative for more information
32°F to 113°F (0°C to 45°C) ambient
temperature
10% to 90% relative humidity, non-condensing
Storage:
68°F to 149°F (20°C to 65°C)
1.7
G-241W-A GEM ports and T-CONTs
Table 1-9 lists the maximum number of supported T-CONTs and GEM ports.
Table 1-9 G-241W-A indoor ONT capacity for GEM ports and T-CONTs
1.8
ONT or MDU
Maximum
Notes
GEM ports per indoor or
outdoor ONT
128
128 are present: 127 are available, 1 is
reserved for OMCI
T-CONTs per indoor or outdoor
ONT
—
G-241W-A performance monitoring statistics
The following section identifies the supported performance monitoring statistics for
G-241W-A ONTs. A check mark indicates the statistic is supported on that ONT. An
empty cell indicates the statistic is not supported. A cell without a check mark
indicates that the counter is not applicable to that type of ONT. The following tables
are categorized by supported alarm types:
• Table 1-10 provides statistics for ONTENET type counters
• Table 1-11 provides statistics for ONTL2UNI type counters
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1-9
1 — G-241W-A unit data sheet
• Table 1-12 provides statistics for PONONTTC, PONONTMCTC,
PONONTTCHSI, PONONTTCCES, PONONTTCFLOW, and
PONONTTCVOIP type counters
• Table 1-13 provides statistics for PONONTTC aggregate type counters
Note — If you have trouble accessing G-241W-A ONTs performance
monitoring statistics using TL1, please contact your Alcatel-Lucent
support representative for more information about how to access and
retrieve performance monitoring type counters.
Table 1-10 G-241W-A ONT ONTENET performance monitoring statistics
RBO
SCF
MCF
DT
IMTE
CSE
AE
IMRE
FTL
TBO
SQE
(1)
LC
G-241W-A
EC
ONTENET statistics
FCSE
ONT
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Note
(1)
A 5 second polling window limitation exists on the ONT, therefore the margin of error for each
15-min window is 5 seconds
Table 1-11 G-241W-A ONT ONTL2UNI performance monitoring statistics
USBYTES
DSBYTES
USMCFRAMES
DSMCFRAMES
USDRPDFRMS
DSDRPDFRMS
MCFRAMES
DSFRAMES
(1)
USFRAMES
G-241W-A
BYTES
ONTL2UNI statistics
FRAMES
ONT
✓
✓
✓
✓
✓
✓
Note
(1)
1-10
A 5 second polling window limitation exists on the ONT, therefore the margin of error for each
15-min window is 5 seconds
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1 — G-241W-A unit data sheet
Table 1-12 G-241W-A ONT PONONTTC, PONONTMCTC, PONONTTCHSI, PONONTTCCES,
PONONTTCFLOW, PONONTTCVOIP performance monitoring statistics
RXBLOCKS
RXFRAGS
LOSTFRAGS
BADGEMHDRS
(1) (2) (3)
TXFRAGS
G-241W-A
PONONTTC, PONONTMCTC, PONONTTCHSI, PONONTTCCES,
PONONTTCFLOW, PONONTTCVOIP statistics
TXBLOCKS
ONT
✓
✓
✓
✓
✓
✓
Notes
(1)
A 5 second polling window limitation exists on the ONT, therefore the margin of error for each
15-min window is 5 seconds
(2)
TC layer OAM performance monitoring is not supported on the OLT R04.00.10 therefore LOSTFRAGS
and TXFRAG counters are not supported on indoor ONTs.
(3)
The LOSTFRAGS statistic is supported in the downstream direction only.
Table 1-13 G-241W-A ONT PONONTTC aggregate performance monitoring statistics
RXBLOCKS
RXFRAGS
LOSTFRAGS(1)
BADGEMHDRS
(2)
TXFRAGS
G-241W-A
PONONTTC (aggregate) statistics
TXBLOCKS
ONT
✓
✓
✓
✓
✓
✓
Notes
(1)
The lost GEM fragment counter supports downstream direction only. Upstream direction is not
supported.
(2)
A 5 second polling window limitation exists on the ONT, therefore the margin of error for each
15-min window is 5 seconds
1.9
G-241W-A functional blocks
Table 1-14 describes the supported interfaces for G-241W-A indoor ONTs.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1-11
1 — G-241W-A unit data sheet
Table 1-14 G-241W-A indoor ONT interfaces
ONT category
description
Interface capacity
Single-residence Wi-Fi
ONTs with Gig-E ONTs,
POTS, with RF video
POTS
ports
Ethernet
ports
VDSL2
—
MoCA
RF
Video
HPNA
—
—
Wi-Fi
USB
G-241W-A indoor ONTs are single-residence ONTs that support Wireless (Wi-Fi)
service. Wi-Fi service on these ONTs are compliant with the IEEE 802.11 standard
and enabled or disabled using a radio on/off switch.
In addition to the Wi-Fi service, these ONTs transmit Ethernet packets to four RJ-45
Ethernet ports, and voice traffic to two RJ-11 POTS ports. These ONTs have two
USB ports also.
The ONTs also support RF video traffic on one F-type coaxial connector. The ONTs
feature fiber optic and power connectors.
Figure 1-4 shows functional blocks for G-241W-A indoor ONTs.
Figure 1-4 Single-residence Wi-Fi ONT with Gigabit Ethernet and POTS and with RF video
Triplexer
RF or
HPNA filter
Internal
USB host
GPON
SOC
External
USB
Host
POTS
GE PHY
switch
2xUSB
2xRJ11
4xRJ45
F-type connector
RESET
PWR
22570
ONT SoC technology serves as the main hardware block for these ONTs; see
Figure 1-5.
1-12
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1 — G-241W-A unit data sheet
Figure 1-5 G-241W-A ONT hardware block
POTS ports
Control
processor
SoC
DSP
SoC Bridge
Ethernet
MACs
GPON
MAC
Ethernet ports
GPON
19421
ONT SoC technology consists of five key elements:
• GPON MAC
•
•
•
•
The Gigabit Passive Optical Network Media Access Control (GPON MAC)
element on the SoC terminates the GPON interface using an optical diplexer. This
interface supports GPON as described in G.984.3 (GPON TC Layer) ITU
specification.
Ethernet MAC
The SoC provides up to four GE MACs.
DSP interface
The Digital Signal Processor (DSP) provides voice processing for 2 POTS lines
with the 3-way calling. The DSP has a dedicated 64 kbyte instruction cache and
shares a 32 kbyte data cache with the Control Processor.
Control Processor
The Control Processor features an integral memory management unit that
supports a dedicated 64 kbyte instruction cache and shares a single 32 kbyte data
cache with the DSP. The Control Processor and DSP also include a single channel
Data Management Application (DMA) controller with a 4 kbyte read ahead
low-latency Dynamic Random Access Memory (DRAM) access port. The
processors typically run at 400 MHz.
Switch matrix
The Switch matrix provides an integrated data channel between the four GE
MACs, the GPON MAC, the DSP, the control processor, and the other integrated
elements such as flash memory, DRAM, and the local bus controller.
These ONTs can also interact with additional hardware components to support
functionality not provided by the SoC technology.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1-13
1 — G-241W-A unit data sheet
1.10
G-241W-A standards compliance
G-241W-A indoor ONTs are compliant with the following standards:
• 802.11b support for maximum transmit power (EIRP) equal to or greater than 200
mW (23.01 dBm)
• 802.11g support for maximum transmit power (EIRP) equal to or greater than 100
•
•
•
•
•
•
1.11
mW (20 dBm)
802.11n support for wireless LAN interface
G.711a/u, G-729 CODEC
G.984 support GPON interface (framing)
G.984.2 support for Amd1, class B+
G984.5 support for optical and other transport network infrastructures
Wi-FI: WEP/WPA/WPA2, WPA-PSK/WPA2-PSK
G-241W-A special considerations
G-241W-A are package D ONTs.
G-241W-A indoor ONT considerations and limitations
Table 1-15 lists the considerations and limitations for Package D G-241W-A ONTs.
Table 1-15 G-241W-A ONT considerations and limitations
Considerations and limitations
The ONT pads packets to 104 as SoC limitation
Due to a Layer 3 packet processing limitation, the ONT can handle up to 220Mb/s (@ up to 72 bytes
for Ethernet Frame sizes. Rates that exceed 220Mb/s with Ethernet frame sizes of less than 72 bytes
will result in dropped frames at the ONT.
The uplink port of the SoC chipset is limited to 1 Gb/s
Some parameters are system level, not line level; for example, enable_caller_id, digitmap.
Most parameters can be configured in either OMCIv2 or XML.The OMCIv2 configuration values
generally take precedence over the XML ones.
Specifically, when voice parameters are configured using OMCIv2, attempting to overwrite the
configuration using XML will have no effect.
The release timer, rls-timer, needs to be configured in OMCIv2, because when it is not, the default
OLT value will be applied, not the XML value.
Upgrade considerations and limitations
Existing ONTs that use 7342 ISAM FTTU releases older than R04.06.xx and
R04.07.xx must be upgraded to use R04.00.10 software while assigned to a PON ID
value smaller than 64. For this purpose, if split ratios larger than 1:64 are being
deployed, you may choose to set aside the first PON ID as a staging point.
1-14
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1 — G-241W-A unit data sheet
G-241W-A indoor ONTs support voice, video, and data services. These ONTs,
which feature Wi-Fi technology, can also function as a residential gateway with layer
2 and layer 3 processing capabilities.
G-241W-A ONT supported modes
The G-241W-A ONT supports one of two modes at any given time. The supported
modes are
• ONT
• Residential gateway
For more information, see G-241W-A ONT supported features in the Configure a
G-241W-A indoor ONT chapter.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
1-15
1 — G-241W-A unit data sheet
1-16
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
2—
Install a G-241W-A indoor ONT
2.1 Purpose
2-2
2.2 General
2-2
2.3 Prerequisites
2-2
2.4 Recommended tools
2.5 Safety information
2.6 Procedure
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
2-2
2-3
2-4
2-1
2 — Install a G-241W-A indoor ONT
2.1
Purpose
This chapter provides the steps to install a G-241W-A indoor ONT.
2.2
General
The steps listed in this chapter describe mounting and cabling for G-241W-A indoor
ONTs.
2.3
Prerequisites
You need the following items before beginning the installation:
• all required cables
2.4
Recommended tools
You need the following tools for the installation:
•
•
•
•
•
•
•
•
•
•
2-2
#2 Phillips screwdriver
1/4 in. (6 mm) flat blade screwdriver
wire strippers
fiber optic splicing tools
RJ-45 cable plug crimp tool
voltmeter or multimeter
optical power meter
drill and drill bits
cable ties
paper clip
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
2 — Install a G-241W-A indoor ONT
2.5
Safety information
Read the following safety information before installing the unit.
Danger 1 — Hazardous electrical voltages and currents can cause
serious physical harm or death. Always use insulated tools and follow
proper safety precautions when connecting or disconnecting power
circuits.
Danger 2 — Make sure all sources of power are turned off and have
no live voltages present on feed lines or terminals. Use a voltmeter to
measure for voltage before proceeding.
Danger 3 — Always contact the local utility company before
connecting the enclosure to the utilities.
Warning — This equipment is ESD sensitive. Proper ESD
protections should be used when removing the fiber access cover of
the indoor ONT.
Caution — Keep indoor ONTs out of direct sunlight. Prolonged
exposure to direct sunlight can damage the unit.
Note 1 — Observe the local and national laws and regulations that
may be applicable to this installation.
Note 2 — Observe the following:
• The indoor ONT should be installed in accordance with the
applicable requirements of the NEC or CEC. Local authorities and
practices take precedent when there is conflict between the local
standard and the NEC or CEC.
• The indoor ONT must be installed by qualified service personnel.
• Indoor ONTs must be installed with cables that are suitably rated
and listed for indoor use.
• See the detailed specifications in the G-241W-A unit data sheet for
the temperature ranges for these ONTs.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
2-3
2 — Install a G-241W-A indoor ONT
2.6
Procedure
Use this procedure to install a G-241W-A indoor ONT.
Place the indoor ONT unit:
On the flat surface, such as a desk.
Wrap the excess optic cable inside the fiber storage tray.
ii
Attach the fiber storage tray to the ONT.
iii
Place the ONT on the flat surface, horizontally resting on its four feet.
On a wall.
Determine whether to mount the G-241W-A indoor ONT in either the
vertical or horizontal position. If possible, mount the ONT on a wall
stud.
ii
Mark the wall with the location of the mounting holes shown in
Figures 2-1 and 2-2. These holes should be the same distance apart as
the distance between the centers of the keyholes on the ONT. Use the
one of the two available fiber storage trays as a wall mounting template
to indicate the location of the mounting holes on the wall.
Figure 2-1 Wall mounting keyholes of the G-241W-A indoor ONT with fiber storage tray
attached
Vertical
mounting
keyholes
Horizontal mounting keyholes
22441
2-4
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
2 — Install a G-241W-A indoor ONT
Figure 2-2 Wall mounting keyholes of the G-241W-A indoor ONT without fiber storage
tray attached
Vertical
mounting
keyholes
Horizontal mounting keyholes
22443
iii
Attach the fiber storage tray to the wall by drilling the holes in the wall
where the tray will be mounted and then drive the mounting screws into
the holes.
Do not drive the mounting screws into the wall completely. Leave
approximately 1/8 in. (6 mm) between the screw head and the wall
surface.
iv
Wrap the optic cable around the spools in the fiber storage tray.
Attach the fiber storage tray to the wall by placing the screw heads of
the mounting screws into the wall mounting holes, either vertical or
horizontal, on the tray.
vi
Slide the ONT enclosure over the fiber storage tray at a forty-five
degree angle and seat the ONT securely on the tray.
Aligning features molded into the fiber storage tray and ONT enclosure
interlock allowing the ONT to seat on the tray.
Review the connection locations as shown in Figures 2-3 and 2-4.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
2-5
2 — Install a G-241W-A indoor ONT
Figure 2-3 G-241W-A indoor ONT connections
Reset
button
Wi-Fi
POTS
Protected
ports
Service button (RJ-11)
Ethernet
ports
(RJ-45)
Fiber
Power
optic connector
connector
F-type
Power
coaxial
on/off
switch connector
22788
Figure 2-4 G-241W-A indoor ONT connections (USB host port)
USB port
22788
Connect the Ethernet cables directly to the RJ-45 ports. See Figure 2-3 for the
location of the RJ-45 ports.
Connect the POTS cables directly to the RJ-11 ports. See Figure 2-3 for the
location of the RJ-11 ports.
If used, connect the coaxial cable to the F-type connector. See Figure 2-3 for the
location of the F-type connector.
Danger — A shock hazard exists when working with the coaxial cable
for the RF video connection. Wear protective gloves and take all
necessary precautions to ensure personal safety.
2-6
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
2 — Install a G-241W-A indoor ONT
Note 1 — Observe the following:
•
•
To comply with FCC standards, use either RG-6 or RG-59 coaxial
cable. Also, proper attenuation must be inserted at the coaxial
output to guarantee that at the end of any coaxial drop, every video
signal is below 15.5 dBmV and audio signals are below 2.55 dBmV
(per channel).
You may need to install the 75-ohm coaxial F connector on the video
cable.
Note 2 — Observe the following when connecting the F-type coaxial
connector to the coaxial connector on the ONT:
•
Fully tighten the F-type connector on the cable by hand before using
a wrench to complete tightening (up to a maximum of an additional
1/8 turn). If using a torque wrench (as is recommended) to tighten
the connector, the torque setting should be between a minimum of
20 in-lbs and a maximum of 40 in-lbs. The connector should be tight
enough when the task is complete that it can not be unscrewed by
hand.
Connect the SC/APC fiber optic cable directly to the ONT. See Figure 2-3 for
location of the fiber optic connector.
Danger — Fiber cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
Warning — Be careful to maintain a bend radius of no less than 1.5 in.
(3.8 cm) when connecting the fiber optic cable. Too small of a bend
radius in the cable can result in damage to the optic fiber.
Note — Fiber cable preparation varies depending on the type and size
of the inside or outside plant fiber cable being spliced to the SC/APC
fiber optic pigtail cable.
Install the power supply according to manufacturer specifications.
Connect the power cable with an 8-pin Molex connector to the power supply.
Connect the power cable with an 8-pin Molex connector to the ONT unit; see
Figure 2-5 for the Molex pin alignment.
Warning — To avoid the possibility of damage to the pins on the power
cable connector, carefully align the pins on the connector on the cable
with the pin holes in the power connector on the ONT before making the
connection.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
2-7
2 — Install a G-241W-A indoor ONT
Note — Observe the following:
•
Only Pins 1, 2, and 7 in the Molex connector pin arrangement shown
in Figure 2-5 are used with G-241W-A indoor ONTs.
Figure 2-5 Molex 8-pin connector
Pin 2
Pin 1
Pin 8
Pin 3
Pin 7
20179
10
Power up the ONT unit by using the on/off power switch; see Figure 2-3 for the
location of the power switch.
11
If used, enable the Wi-Fi service, as described in Configure a G-241W-A indoor
ONT.
12
Verify the ONT LEDs, voltage status, and optical signal levels; see the 7368
Hardware and Cabling Installation Guide.
13
Activate and test the services; see the 7368 Hardware and Cabling Installation
Guide.
14
If used, configure the SLID; see the 7368 ISAM ONT Configuration, Management,
and Troubleshooting Guide for more information.
15
If necessary, reset the ONT.
16
2-8
Access the Rest button. See Figure 2-3 for the location of the Reset button.
ii
Insert the end of a straightened paper clip or other narrow object into the
hole in the Reset button to reset the ONT.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
3—
Replace a G-241W-A indoor ONT
3.1 Purpose
3-2
3.2 General
3-2
3.3 Prerequisites
3-2
3.4 Recommended tools
3.5 Safety information
3.6 Procedure
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
3-2
3-3
3-4
3-1
3 — Replace a G-241W-A indoor ONT
3.1
Purpose
This chapter provides the steps to replace a G-241W-A indoor ONT.
3.2
General
The steps listed in this chapter describe mounting and cabling for G-241W-A indoor
ONTs.
3.3
Prerequisites
You need the following items before beginning the installation:
• all required cables
3.4
Recommended tools
You need the following tools for replacing the ONT:
•
•
•
•
•
•
•
•
3-2
#2 Phillips screwdriver
1/4 in. (6 mm) flat blade screwdriver
wire strippers
fiber optic splicing tools
RJ-45 cable plug crimp tool
voltmeter or multimeter
optical power meter
drill and drill bits
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
3 — Replace a G-241W-A indoor ONT
3.5
Safety information
Read the following safety information before replacing the unit.
Danger 1 — Hazardous electrical voltages and currents can cause
serious physical harm or death. Always use insulated tools and follow
proper safety precautions when connecting or disconnecting power
circuits.
Danger 2 — Make sure all sources of power are turned off and have
no live voltages present on feed lines or terminals. Use a voltmeter to
measure for voltage before proceeding.
Danger 3 — Always contact the local utility company before
connecting the enclosure to the utilities.
Warning — This equipment is ESD sensitive. Proper ESD
protections should be used when removing the fiber access cover of
the indoor ONT.
Caution — Keep indoor ONTs out of direct sunlight. Prolonged
exposure to direct sunlight can damage the unit.
Note 1 — Observe the local and national laws and regulations that
may be applicable to this installation.
Note 2 — Observe the following:
• The indoor ONT should be installed in accordance with the
applicable requirements of the NEC or CEC. Local authorities and
practices take precedent when there is conflict between the local
standard and the NEC or CEC.
• The indoor ONT must be installed by qualified service personnel.
• Indoor ONTs must be installed with cables that are suitably rated
and listed for indoor use.
• See the detailed specifications in the G-241W-A unit data sheet for
the ONT temperature ranges for these ONTs.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
3-3
3 — Replace a G-241W-A indoor ONT
3.6
Procedure
Use this procedure to replace a G-241W-A indoor ONT.
Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the
services can remain in service (IS).
Use the RTRV-ONT command to verify the ONT status and th associated
services. Record the serial number or the SLID of the ONT displayed in the
command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
ii
If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
If used, disable the Wi-Fi service, as described in Configure a G-241W-A indoor
ONT.
Power down the unit by using the on/off power switch; see Figure 3-1 for the
location of the power button.
Disconnect the POTS, Ethernet and power and coaxial cables, as well as fiber optic
cables from the ONT; see Figure 3-1 for the connector locations on G-241W-A
indoor ONTs.
Attach the fiber dust cover to the end of the SC/APC connector.
Figure 3-1 G-241W-A ONT connections
Reset
button
Wi-Fi
POTS
Protected
ports
Service button (RJ-11)
Ethernet
ports
(RJ-45)
Fiber
Power
optic connector
connector
Power
F-type
on/off
coaxial
switch connector
22788
See Figure 3-2 for the location of the USB ports on the G-241W-A.
3-4
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
3 — Replace a G-241W-A indoor ONT
Figure 3-2 G-241W-A indoor ONT connections (USB host port)
USB port
22788
Replace the ONT with a new unit:
On a flat surface, such as a desk, substitute a replacement ONT for the old
ONT.
On a wall.
Slide the old ONT off of the mounting screws until the ONT is free of the
wall.
ii
Slide the wall mount holes on the ONT enclosure or fiber storage tray of
the new ONT over the mounting screws until it is securely seated.
Connect the Ethernet cables directly to the RJ-45 ports; see Figure 3-1 for the
location of the RJ-45 ports.
Connect the POTS cables directly to the RJ-11 ports; see Figure 3-1 for the
location of the RJ-11 ports.
If used, connect the coaxial cable to the F-type connector. See Figure 3-1 for
location of the F-type connector.
Danger — A shock hazard exists when working with the coaxial cable
for the RF video connection. Wear protective gloves and take all
necessary precautions to ensure personal safety.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
3-5
3 — Replace a G-241W-A indoor ONT
Note 1 — Observe the following:
•
•
To comply with FCC standards, use either RG-6 or RG-59 coaxial
cable. Also, proper attenuation must be inserted at the coaxial
output to guarantee that at the end of any coaxial drop, every video
signal is below 15.5 dBmV and audio signals are below 2.55 dBmV
(per channel).
You may need to install the 75-ohm coaxial F connector on the video
cable.
Note 2 — Observe the following when connecting the F-type coaxial
connector to the coaxial connector on the ONT:
•
Fully tighten the F-type connector on the cable by hand before using
a wrench to complete tightening (up to a maximum of an additional
1/8 turn). If using a torque wrench (as is recommended) to tighten
the connector, the torque setting should be between a minimum of
20 in-lbs and a maximum of 40 in-lbs. The connector should be tight
enough when the task is complete that it can not be unscrewed by
hand.
If required, have approved service personnel who are trained to work with optic
fiber clean the fiber optic connection. See the 7368 ISAM ONT Configuration,
Management, and Troubleshooting Guide for more information about fiber optic
handling, inspection, and cleaning.
Danger — Fiber optic cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
10
Connect the SC/APC fiber optic cable directly to the SC/APC adapter; see Figure
3-1 for the location of the SC/APC adapter.
Danger — Fiber cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
Warning — Be careful to maintain a bend radius of no less than 1.5 in.
(3.8 cm) when connecting the fiber optic cable. Too small of a bend
radius in the cable can result in damage to the optic fiber.
Note — Fiber cable preparation varies depending on the type and size
of the inside or outside plant fiber cable being spliced to the SC/APC
fiber optic pigtail cable.
3-6
11
Install the power supply according to manufacturer specifications.
12
Connect the power cable with an 8-pin Molex connector to the power supply.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
3 — Replace a G-241W-A indoor ONT
13
Connect the power cable with an 8-pin Molex connector to the ONT unit; see
Figure 3-3 for the Molex pin alignment.
Warning — To avoid the possibility of damage to the pins on the power
cable connector, carefully align the pins on the connector on the cable
with the pin holes in the power connector on the ONT before making the
connection.
Note — Observe the following:
•
Only Pins 1, 2, and 7 in the Molex connector arrangement shown in
Figure 3-3 are used with the G-241W-A indoor ONT.
Figure 3-3 Molex 8-pin connector
Pin 2
Pin 1
Pin 8
Pin 3
Pin 7
20179
14
Power up the unit by using the on/off power switch; see Figure 3-1 for the location
of the power switch.
15
If used, enable the Wi-Fi service, as described in Configure a G-241W-A indoor ONT
16
If used, configure the SLID; see the 7368 ISAM ONT Configuration, Management,
and Troubleshooting Guide for more information.
Note — A new SLID or the old SLID may be used with the replacement
ONT. If a new SLID is used, the new SLID must also be programmed at
the P-OLT using TL1 or a network manager. If the old SLID is used, no
changes need to be made at the P-OLT; see the operations and
maintenance documentation for the OLT for more details.
17
Verify the ONT LEDs, voltage status, and optical signal levels; see the 7368
Hardware and Cabling Installation Guide.
18
Activate and test the services; see the 7368 Hardware and Cabling Installation
Guide.
19
If necessary, reset the ONT.
20
Access the Rest button. See Figure 3-1 for the location of the Reset button.
ii
Insert the end of a straightened paper clip or other narrow object into the
hole in the Reset button to reset the ONT.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
3-7
3 — Replace a G-241W-A indoor ONT
3-8
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4—
Configure a G-241W-A indoor ONT
4.1 General
4-2
4.2 HGU mode GUI configuration
4-2
4.3 SFU mode GUI configuration
4-42
4.4 Operator ID
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-47
4-1
4 — Configure a G-241W-A indoor ONT
4.1
General
Please refer to the configuration information provided with your OLT for the
software configuration procedure for a G-241W-A ONT.
For HTTP configuration procedures, please refer to the 7368 ISAM ONT
Configuration, Management, and Troubleshooting Guide.
4.2
HGU mode GUI configuration
Use the procedures below to use the web-based GUI for the G-241W-A in HGU
mode. This mode is preset at delivery.
A home gateway unit (HGU) is a home networking device, used as a gateway to
connect devices in the home through fiber to the Internet. An HGU provides a variety
of features for the home network including routing and firewall capability. By using
the HGU, users can connect all smart equipment in their home, including personal
computers, set-top boxes, mobile phones, and other consumer electronics devices, to
the Internet.
Login
Use the procedure below to log in to the web-based GUI for the G-241W-A.
Procedure 4-1 Login to web-based GUI
Open a web browser and enter the IP address of the ONT in the address bar.
The login window appears.
The default gateway IP address is http://192.168.1.254. You can connect to this
IP address using your web browser after connecting your PC to one of Ethernet
ports of the ONT. The static IP address of your PC must be in the same subnet as
the ONT.
Enter your username and password in the Log in window, as shown in Figure 4-1.
The default username and password are printed on the ONT. The default user
name is userAdmin. The default superuser name is adminGPON. Contact
Alcatel-Lucent for the superuser password.
4-2
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Figure 4-1 Web login window
Caution — If you reset the router to recover the default username and
password, all other router configuration settings will also be restored to
their factory default values.
Note — If you forget the current username and password, press the
reset button for 5 s and the default values for the username and
password will be recovered at startup.
Click Login.
STOP. This procedure is complete.
Device and connection status
G-241W-A ONTs support the retrieval of a variety of device and connection
information, including:
•
•
•
•
•
•
•
device information
LAN status
WAN status
WAN status IPv6
Home networking information
Optics module status
Voice information
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-3
4 — Configure a G-241W-A indoor ONT
Procedure 4-2 Device information retrieval
Select Status > Device Information from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-2.
Figure 4-2 Device Information window
Table 4-1 describes the fields in the Device Information window.
Table 4-1 Device Information parameters
4-4
Field
Description
Device Name
Name on the ONT
Vendor
Name of the vendor
Serial Number
Serial number of the ONT
Hardware version
Hardware version of the ONT
Boot version
Boot version of the ONT
Software version
Software version of the ONT
Chipset
Chipset of the ONT
Device Running
Time
Amount of time the device has run since last reset in hours, minutes, and
seconds
Click Refresh to update the displayed information.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-3 LAN status retrieval
Select Status > LAN Status from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-3.
Figure 4-3 LAN status window
Table 4-2 describes the fields in the LAN status window.
Table 4-2 LAN status parameters
Field
Description
Wireless Information
Wireless Status
Indicates whether the wireless is on or off
Wireless Channel
Wireless channel number
SSID Name
Name of each SSID
Wireless
Encryption Status
Encryption type used on the wireless connection
Wireless Rx
Packets
Number of packets received on the wireless connection
Wireless Tx
Packets
Number of packets transmitted on the wireless connection
Wireless Rx Bytes
Number of bytes received on the wireless connection
Wireless Tx Bytes
Number of bytes transmitted on the wireless connection
Power
Transmission (mW)
Power of the wireless transmission, in mW
Ethernet Information
Ethernet Status
Indicates whether the Ethernet connection is on or off
Ethernet IP
Address
IP address of the Ethernet connection
(1 of 2)
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-5
4 — Configure a G-241W-A indoor ONT
Field
Description
Ethernet Subnet
Mask
Subnet Mask of the Ethernet connection
Ethernet MAC
Address
MAC address of the Ethernet connection
Ethernet Rx
Packets
Number of packets received on the Ethernet connection
Ethernet Tx
Packets
Number of packets transmitted on the Ethernet connection
Ethernet Rx Bytes
Number of bytes received on the Ethernet connection
Ethernet Tx Bytes
Number of bytes transmitted on the Ethernet connection
(2 of 2)
Click Refresh to update the displayed information.
STOP. This procedure is complete.
Procedure 4-4 WAN status retrieval
Select Status > WAN Status from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-4.
Figure 4-4 WAN status window
Table 4-3 describes the fields in the WAN status window.
4-6
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Table 4-3 WAN status parameters
Field
Description
WAN connection
list
Drop-down menu listing all WAN connections. The connection shown is the
connection for which WAN status will be shown.
Connection Mode
Connection mode of the WAN connection
Enable/Disable
Select this checkbox to enable the WAN connection
VLAN
VLAN ID
WAN Link Status
Whether the WAN link is up or down
Pon Link Status
Whether the PON link is up or down
Tx Packets
Number of packets transmitted on the WAN connection
Rx Packets
Number of packets received on the WAN connection
Tx Dropped
Number of packets dropped on the transmit WAN connection
Rx Dropped
Number of packets dropped on the receive WAN connection
Err Packets
Number of errored packets on the WAN connection
Click Refresh to update the displayed information.
STOP. This procedure is complete.
Procedure 4-5 WAN status IPv6 retrieval
Select Status > WAN Status IPv6 from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-5.
Figure 4-5 WAN status IPv6 window
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-7
4 — Configure a G-241W-A indoor ONT
Table 4-4 describes the fields in the WAN status IPv6 window.
Table 4-4 WAN status IPv6 parameters
4-8
Field
Description
WAN connection
list
Drop-down menu listing all WAN connections. The connection shown is the
connection for which WAN status will be shown.
Enable/Disable
Select this checkbox to enable the WAN connection
VLAN
VLAN ID
IPv6 Address
IPv6 Address that identifies the device and its location
IPv6 Prefix
IPv6 prefix
IPv6 Gateway
IPv6 gateway address
Primary DNS
Primary Domain Name Server
Second DNS
Secondary Domain Name Server
Pon Link Status
Whether the PON link is up or down
Tx Packets
Number of packets transmitted on the WAN connection
Rx Packets
Number of packets received on the WAN connection
Tx Dropped
Number of packets dropped on the transmit WAN connection
Rx Dropped
Number of packets dropped on the receive WAN connection
Err Packets
Number of errored packets on the WAN connection
Click Refresh to update the displayed information.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-6 Home networking information retrieval
Select Status > Home Networking from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-6.
Figure 4-6 Home networking information window
Table 4-5 describes the fields in the Home networking window.
Table 4-5 Home networking parameters
Field
Description
Local Interface
Ethernet
Table displays the number of Ethernet connections and their settings
Wireless (2.4G)
Table displays the number of wireless connections and their settings
Wireless Settings (2.4G)
Network Name
Name of the wireless network
Access Point
Hexadecimal address of the wireless access point
Local Devices
Table entry
Each entry indicates the connection type, device name, IPv4 address,
hardware address, and IP address allocation of each connected local device.
Click Delete to delete a particular local device connection.
Click Refresh to update the displayed information.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-9
4 — Configure a G-241W-A indoor ONT
Procedure 4-7 Optics module status retrieval
Select Status > Optics Module Status from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-7.
Figure 4-7 Optics module status window
Table 4-6 describes the fields in the Optics module status window.
Table 4-6 Optics module status parameters
4-10
Field
Description
Laser Bias Current (ONT ANI-ONT-Side Optical
Measurements)
Laser bias current, measured in uA
Optics Module Voltage (ONT ANI-ONT-Side Optical
Measurements)
Optics module voltage, measured in V
Optics Module Temperature (ONT ANI-ONT-Side
Optical Measurements)
Optics module temperature, measured in
Rx Optics Signal Level at 1490 nm (ONT ANI-ONT-Side
Optical Measurements)
Received optics signal level at 1490 nm,
measured in dBm
Tx Optics Signal Level at 1310 nm (ONT ANI-ONT-Side
Optical Measurements)
Transmitted optics signal level at 1310 nm,
measured in dBm
Lower (ONT ANI-ONT-Side Optical
Measurements-Optical Threshold)
Lower optical threshold, measured in dBm
Upper (ONT ANI-ONT-Side Optical
Measurements-Optical Threshold)
Lower optical threshold, measured in dBm
Click Refresh to update the displayed information.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-8 Voice information retrieval
Select Status > Voice Information from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-8.
Figure 4-8 Voice Information window
Table 4-7 describes the fields in the Voice Information window.
Table 4-7 Voice Information parameters
Field
Description
POTS 1 Registration Status
Status of POTS port 1: registered or unregistered
POTS 2 Registration Status
Status of POTS port 2: registered or unregistered
POTS 1 Line State
State of POTS line 1: IDLE, Off Hook, or On Hook
POTS 2 Line State
State of POTS line 2: IDLE, Off Hook, or On Hook
Softswitch(1)
Proxy IP address; blank if the line is not registered
Telephone line 1 phone number(1)
Phone number configured for telephone line 1
Telephone line 2 phone number(1)
Phone number configured for telephone line 2
Notes
(1)
This field is only visible at the adminGPON level; it is not visible at the userAdmin level.
Click Refresh to update the displayed information.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-11
4 — Configure a G-241W-A indoor ONT
Network configuration
G-241W-A ONTs support network configuration, including:
•
•
•
•
•
•
•
LAN
LAN IPv6
WAN
WiFi
Routing
DNS
TR-069
Procedure 4-9 LAN networking configuration
Select Network > LAN from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-9.
Figure 4-9 LAN network window
Table 4-8 describes the fields in the LAN network window.
Table 4-8 LAN network parameters
Field
Description
Port Mode:
All Port to L2 Mode
Select this checkbox to set all ports to L2 mode
Port Mode
Port 1 - 4
Drop-down port mode for each port: Route mode or bridge mode
IPv4 Address
IP Address of the ONT
(1 of 2)
4-12
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Field
Description
Subnet Mask
Subnet mask of the ONT
DHCP enable
Select this checkbox to enable DHCP
DHCP Start IP
Address
Starting DHCP IP address
DHCP End IP
Address
Ending DHCP IP address
DHCP Lease Time
DHCP lease time (in min)
Bind MAC Address
MAC address to associate to the LAN
Bind IP Address
IP address to associate to the bound MAC address
(2 of 2)
Select the mode for each port.
Click Save.
Enter the DHCP configuration information.
Click Save.
Bind a MAC address to the LAN by entering the MAC and IP addresses and then
clicking Add. Repeat for all MAC addresses to be bound.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-13
4 — Configure a G-241W-A indoor ONT
Procedure 4-10 LAN IPv6 networking configuration
Select Network > LAN_IPv6 from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-10.
Figure 4-10 LAN IPv6 network window
Table 4-9 describes the fields in the LAN IPv6 network window.
Table 4-9 LAN IPv6 network parameters
Field
Description
DNS Server
Choose a DNS server from the drop-down menu.
prefix config
Choose a prefix config option from the drop-down menu, either
WANConnection (prefix will be obtained from the WAN) or Static (enables you
to enter the prefix).
prefix
This field appears if you selected the “Static” option for the “prefix config”
field. Type a connection.
Interface
This field appears if you selected the Wan Connection option for the “prefix
config” field. Choose a WAN connection interface from the drop-down menu.
DHCPv6 Server
Enable
Select this checkbox to enable DHCP IPv6 server.
DHCP Start IP
Address
Enter the starting DHCP IP address.
DHCP End IP
Address
Enter the ending DHCP IP address.
Whether the
address info
through DCHP
Select this checkbox to enable address information retrieval through DHCP.
(1 of 2)
4-14
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Field
Description
Whether other info
obtained through
DHCP
Select this checkbox to enable retrieval of other information through DHCP.
Maximum interval
for periodic RA
messages
Enter the maximum interval (in seconds) for periodic Router Advertisement
messages. The interval range is from 4 to 1800.
Minimum interval
for periodic RA
messages
Enter the minimum interval (in seconds) for periodic Router Advertisement
messages. The interval range is from 4 to 1800.
(2 of 2)
Choose a DNS server, prefix config, and interface.
Select or enter the DHCP configuration information.
Enter the maximum and minimum intervals for RA messages.
Click Save/Apply.
STOP. This procedure is complete.
Procedure 4-11 WAN networking configuration
Select Network > WAN from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-11.
Figure 4-11 WAN network window
Table 4-10 describes the fields in the WAN network window.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-15
4 — Configure a G-241W-A indoor ONT
Table 4-10 WAN network parameters
4-16
Field
Description
WAN Connection
List
Choose a WAN connection from the drop-down menu to set the connection
parameters
Connection Type
Select a connection type: IPoE or PPPoE
IP Mode
Choose an IP mode from the drop-down menu: IPv4 or IPv6
Enable/Disable
Select this checkbox to enable the WAN connection
NAT
Select this checkbox to enable NAT
Service
Select the checkboxes to enable service types for this connection
Enable VLAN
Select this checkbox to enable VLAN
VLAN ID
Enter the VLAN ID
VLAN PRI
Enter the VLAN PRI
WAN IP Mode
Choose an IP mode from the drop-down menu
Connection Trigger
Choose a connection type from the drop-down menu
Username
Enter the username
Password
Enter the password
Keep Alive Time
Enter the Keep Alive Time (from 5 to 60 seconds)
Configure a specific WAN connection.
Click Save.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-12 WiFi networking configuration
Select Network > WiFi from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-12.
Figure 4-12 WiFi network window
Table 4-11 describes the fields in the WiFi network window.
Table 4-11 WiFi network parameters
Field
Description
Enable
Select this checkbox to enable WiFi
Mode
Choose a wi-fi mode from the drop-down menu:
•
•
•
•
•
auto (b/g/n)
b/g
Bandwidth
Choose a channel from the drop-down menu or choose Auto to have the
channel automatically assigned
Channel
Choose a bandwidth option from the drop-down menu
Transmitting
Power
Choose the percentage transmitting power from the drop-down menu
SSID Select
Choose the SSID from the drop-down menu
SSID Name
Enter the SSID name
Enable SSID
Enable or disable SSID from this drop-down menu
SSID Broadcast
Enable or disable SSID broadcast from this drop-down menu
Port Mode
Choose a port mode from the drop-down menu:
•
•
Route
Bridge
(1 of 2)
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-17
4 — Configure a G-241W-A indoor ONT
Field
Encrypt Mode
Description
Choose an encryption mode from the drop-down menu:
•
•
•
•
WPA Version
Choose a WPA version from the drop-down menu:
•
•
•
WPA Encryption
Mode
OPEN
WEP
WPA/WPA2 Personal
WPA/WPA2 Enterprise
WPA1
WPA2
WPA1/WPA2
Choose a WPA encryption mode from the drop-down menu:
•
•
•
TKIP
AES
TKIP/AES
WPA Key
Enter the WPA key
Enable WPS
Enable or disable WPS from this drop-down menu
WPS Mode
Choose a WPS mode from the drop-down menu:
•
•
PIN Code Number
PBC
PIN
Enter the WPS PIN
(2 of 2)
4-18
Configure the WiFi connection.
If you have enabled and configured WPS, click WPS connect.
Click Save.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-13 Routing configuration
Select Network > Routing from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-13.
Figure 4-13 Routing network window
Table 4-12 describes the fields in the Routing network window.
Table 4-12 Routing network parameters
Field
Description
Enable Routing
Select this checkbox to enable routing
Destination IP
Address
Enter the destination IP address
Destination
Netmask
Enter the destination network mask
Gateway
Enter the gateway address
IPv4 Interface
Choose a WAN connection previously created in the WAN network window
from the drop-down menu
Enter the routing information.
Click Add.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-19
4 — Configure a G-241W-A indoor ONT
Procedure 4-14 DNS configuration
Select Network > DNS from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-14.
Figure 4-14 DNS network window
Table 4-13 describes the fields in the DNS network window.
Table 4-13 DNS network parameters
4-20
Field
Description
Domain Name
Domain name
IPv4 Address
Domain IP address
Origin Domain
Origin domain name
New Domain
New domain name
Enter the domain name and IP address and click Add.
If required, associate an origin domain with a new domain, click Add.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-15 TR-069 configuration
Select Network > TR-069 from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-15.
Figure 4-15 TR-069 network window
Table 4-14 describes the fields in the TR-069 network window.
Table 4-14 TR-069 network parameters
Field
Description
Periodic Inform
Enable
Select this checkbox to enable periodic inform updates
Periodic Inform
Interval(s)
Time between periodic inform updates, in seconds
URL
URL of the auto-configuration server
Username
Username used to log in to the ONT
Password
Password used to log in to the ONT
Connect Request
Username
Username used to log in to the auto-configuration server
Connect Request
Password
Password used to log in to the auto-configuration server
Configure TR-069 by entering the required information.
Click Save.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-21
4 — Configure a G-241W-A indoor ONT
Security configuration
G-241W-A ONTs support security configuration, including:
•
•
•
•
•
firewall
MAC filter
IP filter
URL filter
DMZ and ALG
Procedure 4-16 Firewall configuration
Select Security > Firewall from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-16.
Figure 4-16 Firewall window
Table 4-15 describes the fields in the firewall window.
Table 4-15 Firewall parameters
4-22
Field
Description
Security level
Choose the security level from the drop-down menu
Attack Protect
Enable or disable attack protect from the drop-down menu
Configure the firewall.
Click Save.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-17 MAC filter configuration
Select Security > Mac Filter from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-17.
Figure 4-17 MAC filter window
Table 4-16 describes the fields in the MAC filter window.
Table 4-16 MAC filter parameters
Field
Description
Enable MAC filter
Select this checkbox to enable the MAC filter
Mac Address
MAC address
Mac Filter Mode
Choose the MAC filter mode from this drop-down menu
Configure a MAC filter.
Click Add.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-23
4 — Configure a G-241W-A indoor ONT
Procedure 4-18 IP filter configuration
Select Security > IP filter from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-18.
Figure 4-18 IP filter window
Table 4-17 describes the fields in the IP filter window.
Table 4-17 IP filter parameters
Field
Description
Enable IP Filter
Select this checkbox to enable an IP filter
Mode
Choose an IP filter mode from the drop-down menu:
•
•
Internal Client
Choose an internal client from the drop-down menu:
•
•
4-24
Drop for upstream
Drop for downstream
Customer setting - uses the IP address input below
IP - uses the connecting devices' IP to the ONT
Local IP Address
Local IP address
Source Subnet
Mask
Source subnet mask
Remote IP Address
Remote IP address
Destination Subnet
Mask
Destination subnet mask
Protocol
Choose an application protocol or all from the drop-down menu
Configure the IP filter.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Click Add.
STOP. This procedure is complete.
Procedure 4-19 URL filter configuration
Select Security > URL Filter from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-19.
Figure 4-19 URL Filter window
Table 4-18 describes the fields in the URL Filter window.
Table 4-18 URL Filter parameters
Field
Description
Enable URL filter
Select the checkbox to enable the URL filter
URL filter type
Select the checkbox for Exclude URL or Include URL
URL Address
Type the URL address
Port Number
Type the port number; the default is 80
Configure the URL Filter.
Click Add Filter.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-25
4 — Configure a G-241W-A indoor ONT
Procedure 4-20 DMZ and ALG configuration
Select Security > DMZ and ALG from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-20.
Figure 4-20 DMZ and ALG window
Table 4-19 describes the fields in the DMZ and ALG window.
Table 4-19 DMZ and ALG parameters
Field
Description
ALG Config
Select the checkboxes to enable the protocols to be supported by the ALG
DMZ Config
4-26
WAN Connection
List
Choose a WAN connection from the drop-down menu
Enable DMZ
Select this checkbox to enable DMZ on the chosen WAN connection
DMZ IP Address
Choose Customer Setting and enter the DMZ IP address or choose the IP
address of a connected device from the drop-down menu
Configure ALG.
Click Save ALG.
Configure DMZ.
Click Save DMZ.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Application configuration
G-241W-A ONTs support application configuration, including:
•
•
•
•
•
port forwarding
DDNS
NTP
USB storage
UPnP and DLNA
Procedure 4-21 Port forwarding configuration
Select Application > Port forwarding from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-21.
Figure 4-21 Port forwarding window
Table 4-20 describes the fields in the port forwarding window.
Table 4-20 Port forwarding parameters
Field
Description
APPName
Choose an application name from the drop-down menu
WAN Port
WAN port range
LAN Port
LAN port range
Internal Client
Choose a connected device from the drop-down menu and enter the
associated IP address
Protocol
Choose the port forwarding protocol from the drop-down menu:
•
•
•
Enable Mapping
TCP
UDP
TCP/UDP
Select this checkbox to enable mapping
(1 of 2)
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-27
4 — Configure a G-241W-A indoor ONT
Field
Description
WAN Connection
List
Choose a WAN connection from the drop-down menu
(2 of 2)
Configure port forwarding.
Click Add.
STOP. This procedure is complete.
Procedure 4-22 DDNS configuration
Select Application > DDNS from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-22.
Figure 4-22 DDNS window
Table 4-21 describes the fields in the DDNS window.
Table 4-21 DDNS parameters
Field
Description
WAN Connection
List
Choose a WAN connection from the drop-down menu
Enable DDNS
Select this checkbox to enable DDNS on the chosen WAN connection
ISP
Choose an ISP from the drop-down menu.
Domain Name
Domain name
Username
Username
(1 of 2)
4-28
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Field
Description
Password
Password
(2 of 2)
Configure DDNS.
Click Save.
STOP. This procedure is complete.
Procedure 4-23 NTP configuration
Select Application > NTP from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-23.
Figure 4-23 NTP window
Table 4-22 describes the fields in the NTP window.
Table 4-22 NTP parameters
Field
Description
Enable NTP Service
Select this checkbox to enable NTP service
Current Time
Enter the current local date and time
First Time Server
Choose a time server from the drop-down menu or choose Customer setting
and enter the address of the time server.
Second Time
Server
Choose a time server from the drop-down menu or choose Customer setting
and enter the address of the time server.
Interval Time
Interval at which to get the time from the time server, in seconds
Time Zone
Choose the local time zone from the drop-down menu
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-29
4 — Configure a G-241W-A indoor ONT
Configure NTP.
Click Save.
STOP. This procedure is complete.
Procedure 4-24 USB storage configuration
Select Application > USB storage from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-24.
Figure 4-24 USB storage window
Table 4-23 describes the fields in the USB storage window.
Table 4-23 USB storage parameters
4-30
Field
Description
Enable FTP server
Select this checkbox to enable using an FTP server for data storage
Username
Username for FTP server
Password
Password for FTP server
Re-enter Password
Password for FTP server
Configure USB storage.
Click Save.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-25 UPnP and DLNA configuration
Select Application > UPnP and DLNA from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-25.
Figure 4-25 UPnP and DLNA window
Select the Enable UPnP checkbox to enable UPnP.
Click Save/Apply.
Select the Enable Ushare checkbox to enable Ushare (the UPnP/DLNA media
server).
Select the Enable DLNA checkbox to enable DLNA.
Click Save/Apply.
STOP. This procedure is complete.
Maintenance
G-241W-A ONTs support maintenance tasks, including:
•
•
•
•
•
•
•
•
•
•
password change
LOID configuration
SLID configuration
device management
backup and restore
firmware upgrade
device reboot
restore factory defaults
diagnose
log
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-31
4 — Configure a G-241W-A indoor ONT
Procedure 4-26 Password configuration
Select Maintain > Password from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-26.
Figure 4-26 Password window
Table 4-24 describes the fields in the password window.
Table 4-24 Password parameters
4-32
Field
Description
New Password
New password
Re-enter password
Password must match password entered above
Prompt message
Password prompt message
Configure the new password.
Click Save.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-27 LOID configuration
Select Maintain > LOID Config from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-27.
Figure 4-27 LOID Config window
Table 4-25 describes the fields in the LOID configuration window.
Table 4-25 LOID configuration parameters
Field
LOID
Description
Type the LOID; the maximum number of characters is 24
If the password is null, this field may be left blank
Password
Type the password; the maximum number of characters is 12
Configure the LOID.
Click Save/Apply.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-33
4 — Configure a G-241W-A indoor ONT
Procedure 4-28 SLID configuration
Select Maintain > SLID Configuration from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-28.
Figure 4-28 SLID configuration window
Table 4-26 describes the fields in the SLID configuration window.
Table 4-26 SLID configuration parameters
4-34
Field
Description
Current SLID
Displays current SLID
Input new SLID
Enter new SLID
SLID Mode
Choose a SLID mode from the drop-down menu.
Configure the new SLID.
Click Save.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-29 Device management
Select Maintain > Device Management from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-29.
Figure 4-29 Device management window
Table 4-27 describes the fields in the Device management window.
Table 4-27 Device management parameters
Field
Description
Host name
Choose a host from the drop-down menu
Alias
Enter an alias for the chosen host
Configure an alias for a specific host.
Click Add.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-35
4 — Configure a G-241W-A indoor ONT
Procedure 4-30 Backup and restore
Select Maintain > Backup and Restore from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-30.
Figure 4-30 Backup and Restore window
Click Select File and choose the backup file.
Click Import Config File to restore the ONT to the saved backup or click Export
Config File to export the current ONT configuration to the backup file.
STOP. This procedure is complete.
Procedure 4-31 Upgrade firmware
Select Maintain > Firmware Upgrade from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-31.
Figure 4-31 Firmware upgrade window
4-36
Click Select File and choose the firmware file.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Click Upgrade to upgrade the firmware.
STOP. This procedure is complete.
Procedure 4-32 Reboot ONT
Select Maintain > Reboot Device from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-32.
Figure 4-32 Reboot window
Click Reboot to reboot the ONT.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-37
4 — Configure a G-241W-A indoor ONT
Procedure 4-33 Restore factory defaults
Select Maintain > Factory Default from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-33.
Figure 4-33 Factory default window
4-38
Click Factory Default to reset the ONT to its factory default settings.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-34 Diagnose connections
Select Maintain > Diagnose from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-34.
Figure 4-34 Diagnose window
Choose a WAN connection to diagnose from the drop-down menu.
Enter the IP address or domain name.
Select the test type by selecting either ping or traceroute.
Enter a ping packet length (64-1024).
Enter the number of ping attempts to perform (1 - 1000).
Click Start Test. Results will be displayed at the bottom of the window.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-39
4 — Configure a G-241W-A indoor ONT
Procedure 4-35 View log files
Select Maintain > Log from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-35.
Figure 4-35 Log window
Choose a write level from the drop-down menu to determine which types of events
are recorded in the log file:
•
•
•
•
•
•
•
•
Choose a reading level from the drop-down menu to determine which types of
events to display from the log file:
•
•
•
•
•
•
•
•
4-40
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
The log file is displayed at the bottom of the window.
STOP. This procedure is complete.
RG troubleshooting counters
The Troubleshooting Counters feature enables service providers and end users to
monitor the performance of their broadband connection.
Tests are run to retrieve upstream and downstream throughput, latency, and DNS
response time. The Troubleshooting Counters window also displays upstream and
downstream packet loss and Internet status.
Procedure 4-36 Retrieve Residential Gateway (RG) troubleshooting
counters
Select RG Troubleshooting Counters from the left menu in the GPON Home
Gateway window.
The RG Troubleshooting Counters window appears; see Figure 4-36.
Figure 4-36 RG Troubleshooting Counters window
Table 4-28 describes the fields in the RG Troubleshooting Counters window.
Table 4-28 RG Troubleshooting Counters parameters
Field
Description
WAN Connection List
Select a WAN connection from the list
US Throughput
Click US Speed Test to specify the time for the upstream test
The default is weekly, performed at idle to a public server
DS Throughput
Click DS Speed Test to specify the time for the downstream test
The default is weekly, performed at idle to a public server
(1 of 2)
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-41
4 — Configure a G-241W-A indoor ONT
Field
Description
US Packet Loss
The number of upstream packages lost
DS Packet Loss
The number of downstream packages lost
Internet Status
Whether the broadband connections is active (UP) or not (DOWN)
Latency
Click Latency Test to specify the time for the test
The default is weekly, performed at idle to a public server
DNS Response Time
Click DNS Response Test to specify the time for the test
The default is weekly, performed at idle to a public server
(2 of 2)
4.3
Configure the test times if desired.
Click Refresh to update the data.
STOP. This procedure is complete.
SFU mode GUI configuration
Use the procedures below to use the web-based GUI for the G-241W-A in SFU
mode. This mode is preset at delivery.
SFU customer premise devices are designed for single indoor residential
applications. These ONTs address the demand for bandwidth intensive services, such
as high definition television (HDTV), video-on-demand (VOD) and online games.
The ONT can be configured to seamlessly deliver voice-over-IP and high speed
Internet access via a single fiber optic connection to the home.
Login
Use the procedure below to log in to the web-based GUI for the G-241W-A.
Procedure 4-37 Login to web-based GUI
Open a web browser and enter the IP address of the ONT in the address bar.
The login window appears.
The default gateway IP address is http://192.168.1.254. You can connect to this
IP address using your web browser after connecting your PC to one of Ethernet
ports of the ONT. The static IP address of your PC must be in the same subnet as
the ONT.
Enter your username and password in the Log in window, as shown in Figure 4-37.
The default username and password are printed on the ONT. The default
superuser username is adminGPON. Contact Alcatel-Lucent for the superuser
password.
4-42
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Figure 4-37 Web login window
Caution — If you reset the router to recover the default username and
password, all other router configuration settings will also be restored to
their factory default values.
Note — If you forget the current username and password, press the
reset button for 5 s and the default values for the username and
password will be recovered at startup.
Click Login.
STOP. This procedure is complete.
Device and connection status
G-241W-A ONTs support the retrieval of a variety of device information.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-43
4 — Configure a G-241W-A indoor ONT
Procedure 4-38 Device information retrieval
Select Status > Device Information from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-38.
Figure 4-38 Device Information window
Table 4-29 describes the fields in the Device Information window.
Table 4-29 Device Information parameters
4-44
Field
Description
Device Name
Name on the ONT
Vendor
Name of the vendor
Serial Number
Serial number of the ONT
Hardware version
Hardware version of the ONT
Boot version
Boot version of the ONT
Software version
Software version of the ONT
Chipset
Chipset of the ONT
Device Running
Time
Amount of time the device has run since last reset in hours, minutes, and
seconds
Click Refresh to update the displayed information.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Maintenance
G-241W-A ONTs support maintenance tasks, including:
• password change
• LOID configuration
• SLID configuration
Procedure 4-39 Password configuration
Select Maintain > Password from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-39.
Figure 4-39 Password window
Table 4-30 describes the fields in the password window.
Table 4-30 Password parameters
Field
Description
New Password
New password
Re-enter password
Password must match password entered above
Prompt message
Password prompt message
Configure the new password.
Click Save.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-45
4 — Configure a G-241W-A indoor ONT
Procedure 4-40 LOID configuration
Select Maintain > LOID Config from the top-level menu in the GPON Home Gateway
window, as shown in Figure 4-40.
Figure 4-40 LOID configuration window
4-46
Enter the LOID.
Enter the password, if applicable.
Click Save/Apply.
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4 — Configure a G-241W-A indoor ONT
Procedure 4-41 SLID configuration
Select Maintain > SLID Configuration from the top-level menu in the GPON Home
Gateway window, as shown in Figure 4-41.
Figure 4-41 SLID configuration window
Table 4-31 describes the fields in the SLID configuration window.
Table 4-31 SLID configuration parameters
4.4
Field
Description
Current SLID
Displays current SLID
Input new SLID
Enter new SLID
SLID Mode
Choose a SLID mode from the drop-down menu.
Configure the new SLID.
Click Save.
STOP. This procedure is complete.
Operator ID
Use the procedure below to modify the operator ID for the G-241W-A.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
4-47
4 — Configure a G-241W-A indoor ONT
Procedure 4-42 Modifying the operator ID
Register the ONT with the OLT.
Check the original OPID.
Update the OntConfig.xml file by adding-the following content:



where: xxxx is the correct operator ID, for example ALCL for HGU mode, or XXXX for SFU mode.
Use a TFTP client tool to transfer the OntConfi.xml file to the OLT’s ONT directory
and change the filename to the software version number, for example,
3FE123456789.xml.
Use a TL1 command to configure ONUSWCRTL:
ENT-ONTSWCTRL::1::::HWVER=hwver,VARNT=,PLNDSWVER=UNPLANNED,
PLNDSWVERCONF=UNPLANNED,DLDSWVER=swver;
where:
hwver is the EQPTVERNUM, for example EQPTVERNUM=3FE54945ABAA.
swver is the software version number used as the filename in step 2, for example
3FE123456789.xml.
Download the .xml file to update the operator ID:
ED-ONT::ONT-1/1/3/1/19::::DLSW=AUTO;
Restart the ONT, then connect to the LAN and access the web-based GUI to check
the operator ID default setting.
Use a TL1 command to disable further downloads:
ED-ONT::ONT-1/1/3/1/19::::DLSW=DISABLED;
4-48
STOP. This procedure is complete.
Alcatel-Lucent 7368 ISAM ONT
Edition 01
I-240W-S I-241W-S I-241W-U Product Guide
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2015:07:03 14:43:56+08:00
Create Date                     : 2015:07:03 14:43:56+08:00
Metadata Date                   : 2015:07:03 14:43:56+08:00
Creator Tool                    : FrameMaker 11.0.2
Format                          : application/pdf
Title                           : 7368_ISAM_ONT_G-241W-A_Product_Information_Guide.book
Creator                         : inberlja
Document ID                     : uuid:3f146cf2-f7de-4162-aeb3-602869d60637
Instance ID                     : uuid:e8ddd6cd-60eb-48bf-a13e-5f16636d5c1c
Producer                        : Acrobat Elements 10.0.0 (Windows)
Has XFA                         : No
Page Count                      : 81
Author                          : inberlja

EXIF Metadata provided by EXIF.tools