Nokia Solutions and Networks CPE25400 Non-Line-of-Sight Fixed Wireless Data Link User Manual 5A USER GUIDE 68P09285A67 D
Nokia Solutions and Networks Non-Line-of-Sight Fixed Wireless Data Link 5A USER GUIDE 68P09285A67 D
Contents
- 1. 5A USER GUIDE 68P09285A67 D
- 2. 5B Hardware Installation 68P09287A82 B
5A USER GUIDE 68P09285A67 D
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 924291 |
| Application ID | dVdSciEABPVkP2tjja54SQ== |
| Document Description | 5A USER GUIDE 68P09285A67 D |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 199.02kB (2487784 bits) |
| Date Submitted | 2008-04-07 00:00:00 |
| Date Available | 2008-05-05 00:00:00 |
| Creation Date | 2008-03-10 16:58:44 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2008-03-20 14:13:05 |
| Document Title | 5A USER GUIDE 68P09285A67 D |
| Document Creator | PScript5.dll Version 5.2 |
motorola.com CPEo 400 Series 68P09285A67-D 68P09285A67-D MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc., 2008. PMS 4505 C Best_L2R_V --Black PC Version 100% Folds to: 8.5 inches + spine width x 11.0 inches height All text and images are FPO. Overall gloss aqueous coating. Accuracy While reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. Motorola, Inc. reserves the right to make changes to any products described herein to improve reliability, function, or design, and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Motorola, Inc. does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Motorola products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Motorola intends to announce such Motorola products, programming, or services in your country. Copyrights This document, Motorola products, and 3rd Party Software products described in this document may include or describe copyrighted Motorola and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola, its licensors, and other 3rd Party supplied software certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Motorola, its licensors, or the 3rd Party software supplied material contained in the Motorola products described in this document may not be copied, reproduced, reverse engineered, distributed, merged or modified in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola or other 3rd Party supplied software, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product. A list of 3rd Party supplied software copyrights are contained in the Supplemental information section of this document. Restrictions Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Motorola, Inc. License Agreements The software described in this document is the property of Motorola, Inc and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. High Risk Materials Components, units, or 3rd Party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities). Motorola and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities. Trademarks Motorola and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. The CE mark confirms Motorola, Inc. statement of compliance with EU directives applicable to this product. Copies of the Declaration of Compliance and installation information in accordance with the requirements of EN50385 can be obtained from the local Motorola representative or by contacting the Customer Network Resolution Center (CNRC). The 24 hour telephone numbers are listed at https://mynetworksupport.motorola.com. Select Customer Network Resolution Center contact information. Alternatively if you do not have access to CNRC or the internet, contact the Local Motorola Office. MAR 2008 Table of Contents Contents ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ WiMAX CPEo400 Series User Guide Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Version Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 1: WiMAX CPEo400 Series User Guide Product Overview . . . . . . . . . . . WiMAX CPEo400 Series Overview . Powerful Features in a Single Unit . Operating Information . . . . . . . 1-2 1-2 1-3 1-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Protection . . . . . . . . . . . . . . . . . . 2-2 2-3 2-3 2-3 2-4 2-4 2-4 2-6 2-6 2-6 2-6 2-8 Chapter 2: Installation Hardware Installation Overview . . . . . . . . Software Installation Overview . . . . . . . . What You Need to Begin . . . . . . . . . . Advanced Setup . . . . . . . . . . . . . . Procedure to Log into the CPE . . . . . . . . . Before you Begin Configuration . . . . . . Logging into the CPE . . . . . . . . . . . Setup Wizard and Authentication . . . . . . . Wizard Step One — Enable Login Password Wizard Step Two — Device Time . . . . . . Wizard Step Three — WiMAX Security . . . CPE User Screens . . . . . . . . . . . . . Chapter 3: Basic Configuration 3-2 3-2 3-4 3-7 4-2 4-2 4-3 4-6 Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Basic Configuration Overview Personalize Menu . . . . Internet Menu . . . . . . Status Menu . . . . . . . Chapter 4: Advanced Configuration Advanced Configuration Overview Port Forwarding Menu . . . . Local Address Menu . . . . . Control Panel Menu . . . . . Chapter 5: Glossary and Troubleshooting 68P09285A67-D MAR 2008 Contents 5-2 5-3 5-3 5-3 5-3 Configuring TCP/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuring TCP/IP in Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuring TCP/IP in Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 6-2 6-6 Glossary . . . . . . . . . . . . . . . . Basic Troubleshooting Overview . . . . . . A Computer Cannot Log On to the CPE Cannot Connect to the Internet . . . . Additional Troubleshooting Support . . Chapter 6: Configuring TCP/IP and DNS Settings Chapter 7: Important Safety and Legal Information Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . This Product complies with the following RF energy exposure standards and guidelines: Caring for the Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disposal of Motorola Equipment in EU Countries . . . . . . . . . . . . . . . . . . . . Disposal of Motorola Networks Equipment in Non EU Countries . . . . . . . . . . . . CMM Disclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyrights and Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Usage Disclosure Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii 7-2 7-2 7-7 7-7 7-7 7-7 7-9 7-9 7-9 7-9 68P09285A67-D MAR 2008 List of Figures List of Figures ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure 1-1: CPEo400 Unit . . . . . . . . . . . . . . . . . . . . . 2-1: CPE Login Screen . . . . . . . . . . . . . . . . . . . 2-2: CPE Status Screen. . . . . . . . . . . . . . . . . . . 2-3: User Buttons. . . . . . . . . . . . . . . . . . . . . . 3-1: Personalize Menu . . . . . . . . . . . . . . . . . . . 3-2: CPE Internet Menu . . . . . . . . . . . . . . . . . . 3-3: CPE Status Menu . . . . . . . . . . . . . . . . . . . 4-1: CPE Port Forwarding Menu New . . . . . . . . . . . 4-2: CPE Local Address Menu . . . . . . . . . . . . . . . 4-3: CPE Control Panel Menu. . . . . . . . . . . . . . . . 6-1: Windows Control Panel . . . . . . . . . . . . . . . . 6-2: Network and Dial-up Connections . . . . . . . . . . . 6-3: Local Area Connection . . . . . . . . . . . . . . . . . 6-4: Properties . . . . . . . . . . . . . . . . . . . . . . . 6-5: Select Network Connection Type . . . . . . . . . . . 6-6: Select Network Protocol . . . . . . . . . . . . . . . . 6-7: Internet Protocol (TCP/IP) Properties . . . . . . . . . 6-8: Windows XP Start Window. . . . . . . . . . . . . . . 6-9: Control Panel . . . . . . . . . . . . . . . . . . . . . 6-10: Network and Internet Connections . . . . . . . . . . 6-11: Control Panel Classic View . . . . . . . . . . . . . . 6-12: Network Connections . . . . . . . . . . . . . . . . 6-13: Local Area Connection Properties . . . . . . . . . . 6-14: Internet Protocol (TCP/IP) Properties . . . . . . . . 7-1: EU RoHS . . . . . . . . . . . . . . . . . . . . . . . 7-2: China Management Methods (CMM) Disclosure Table. 68P09285A67-D MAR 2008 1-2 2-4 2-7 2-8 3-2 3-5 3-7 4-2 4-4 4-6 6-2 6-3 6-3 6-4 6-4 6-5 6-5 6-6 6-6 6-7 6-7 6-8 6-8 6-9 7-7 7-8 iii List of Figures iv 68P09285A67-D MAR 2008 List of Tables List of Tables ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table Table 1: Manual version history . . . . . . . . . . . 2-1: User Screens . . . . . . . . . . . . . . . 3-1: Password Fields . . . . . . . . . . . . . . 3-2: Device Time Fields . . . . . . . . . . . . 3-3: Device Name Fields . . . . . . . . . . . . 3-4: Restore Factory Settings Fields . . . . . . 3-5: WiMAX Security Fields . . . . . . . . . . 3-6: Firewall Fields . . . . . . . . . . . . . . 3-7: Dynamic DNS Fields . . . . . . . . . . . 4-1: Port Forwarding Basic Fields . . . . . . . 4-2: Port Forwarding Forwarding Screen Fields 4-3: DHCP Server Fields. . . . . . . . . . . . 4-4: Lease Status Fields . . . . . . . . . . . . 4-5: Lease Reservation Fields . . . . . . . . . 4-6: Software Tab Fields . . . . . . . . . . . . 4-7: System Tab Fields. . . . . . . . . . . . . 5-1: Glossary Terms . . . . . . . . . . . . . . 7-1: Compliance Statement . . . . . . . . . . 68P09285A67-D MAR 2008 2-8 3-3 3-3 3-3 3-4 3-5 3-6 3-6 4-3 4-3 4-4 4-5 4-5 4-7 4-7 5-2 7-3 List of Tables vi 68P09285A67-D MAR 2008 About This Manual WiMAX CPEo400 Series User Guide ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 68P09285A67-D MAR 2008 Revision History Revision History ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ The following shows the issue status of this manual since it was first released. Version Information Table 1 Manual version history Manual issue Date of issue AUG 2007 CPEo400 User Guide Release SEP 2007 Upissue to Initial Release OCT 2007 Includes review comments MAR 2008 Update to remove Desktop Remarks 68P09285A67-D MAR 2008 Chapter WiMAX CPEo400 Series User Guide ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 68P09285A67-D MAR 2008 1-1 Product Overview Chapter 1: WiMAX CPEo400 Series User Guide Product Overview ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ WiMAX CPEo400 Series Overview Figure 1-1 CPEo400 Unit Thank you for purchasing the Motorola Customer Premises Equipment Outdoor (CPEo) 400 device. The Outdoor CPE allows you to connect to the wireless world easily and seamlessly. The CPE outdoor (CPEo) device provides the user: • Convenience — with easy plug and play functionality. Flexible connectivity. Compact design. • Performance — high gain antenna providing Best in Class range in outdoor environment. • Control — remote management capability allows easy detection and authentication once the unit is setup. The features and the physical appearance of your Outdoor CPE device may differ slightly from the illustration. This product is subject to change. For the most recent documentation, visit the Product Documentation page on www.motorola.com. 1-2 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Powerful Features in a Single Unit Powerful Features in a Single Unit The CPE device provides the following features: • WiMAX (Worldwide Interoperability for Microwave Access) Access • WAN DHCP Client • LAN DHCP Server • Home Gateway Functions Operating Information Operating temperature for this unit is -40C to 55C (-40F to 131F). 68P09285A67-D MAR 2008 1-3 Operating Information 1-4 Chapter 1: WiMAX CPEo400 Series User Guide 68P09285A67-D MAR 2008 Chapter Installation ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 68P09285A67-D MAR 2008 2-1 Hardware Installation Overview Chapter 2: Installation Hardware Installation Overview ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ The CPEo400 is an outdoor unit and the hardware installation is beyond the scope of this document. Please arrange with your service provider for professional installation. 2-2 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Software Installation Overview Software Installation Overview ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ What You Need to Begin Once the CPEo400 has been professionally installed by your service provider, you will need: • A computer Ensure your computer is plugged in, and the ethernet cable is connected from your computer to the CPE. Advanced Setup The CPE can also be used to connect to a multi-port switch (hub) - purchased separately from the CPE. Connecting the CPE device to a hub will allow you to connect more than one computer to your CPE device. 68P09285A67-D 2-3 MAR 2008 Procedure to Log into the CPE Chapter 2: Installation Procedure to Log into the CPE ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Before you Begin Configuration Some settings on your computer must be verified or changed to ensure that your computer configuration can support the Outdoor CPE. Verify that the Network Settings of your LAN Connection on your computer are set to Automatically Obtain IP Addresses and Automatically Obtain DNS Server Addresses. Refer to Chapter 6 Configuring TCP/IP and DNS Settings for instructions. Logging into the CPE Use the following procedure to log into the CPE Figure 2-1 CPE Login Screen Continued 2-4 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Procedure 2-1 Logging into the CPE Logging into the CPE Verify that the Network Settings of your LAN Connection on your computer are set to Automatically Obtain IP Addresses and Automatically Obtain DNS Server Addresses. Refer to Chapter 6 Configuring TCP/IP and DNS Settings On a computer that is connected to the CPE, open a web browser. In the Address or Location field, type http://mywimax. and press ENTER to display the login screen. NOTE You must include the period (.) after http://mywimax. in order to access the login screen. The Welcome to Motorola WiMAX CPE screen will be displayed and will prompt you for a password. In the Password field, enter motorola for the password. Click Login First time users will see a pop-up box that states: Result: The Wizard application will guide you through for the first time configuration. Click OK button to continue. 68P09285A67-D Click the OK button to launch the wizard application. 2-5 MAR 2008 Setup Wizard and Authentication Chapter 2: Installation Setup Wizard and Authentication ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ You can use the setup Wizard to quickly set up your CPE for use. Wizard Step One — Enable Login Password Protection The setup Wizard automatically enables Password Protection. It is recommended that you keep the password protection enabled to protect your device and network. Procedure 2-2 Enable Password Protection The Setup Wizard automatically enables Password Protection. When Password Protection is enabled, users are prompted for and must supply the correct password prior to gaining access the CPE. Ensure the Enable Login Password Protection box is checked. The password will always be motorola. Click Next Wizard Step Two — Device Time This screen allows you to set the time zone for your location and to enable automatic adjustment for Daylight Savings Time (when applicable).. Procedure 2-3 Device Time Select the appropriate time zone for your location from the drop down box. Check the box called Auto Adjust for Daylight Savings Time if you live in a region that observes Daylight Savings Time (this box is checked by default). Click the Next button. Wizard Step Three — WiMAX Security The WiMAX Security tab will contain your authentication method. Check with your service provider to determine if they require a user name and password for authentication purposes. Procedure 2-4 WiMAX Security Select one of the following: IF: THEN... Continued 2-6 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Procedure 2-4 Wizard Step Three — WiMAX Security WiMAX Security (Continued) The Authentication Method is EAP-TLS . 1. Enter the Realm information as provided by your service provider 2. Click the Apply button The Authentication 1. Method is EAP-TTLS/MS-CHAPv2 Enter the User Nameand Password as supplied by your service provider. 2. Enter the Realminformation as provided by your service provider. 3. Click the Finish button when finished Congratulations! You have now completed the setup of your WiMAX connection. NOTE You can confirm a successful WiMAX connection by seeing a green check mark on the globe symbol at the top of your User Screen. Click OK on the Congratulations! dialog box. A WiMAX Status Screen will appear. This screen will provide any status associated with your WiMAX Wireless Broadband connection. See the example Status Screen below. Figure 2-2 68P09285A67-D CPE Status Screen 2-7 MAR 2008 CPE User Screens Chapter 2: Installation CPE User Screens There are buttons that appear on each CPE User Screen. These buttons and their functions are described here. Table 2-1 User Screens Button Function Restart Shuts down and restarts the CPE device. Wizard Prompts you to start the set-up wizard over again. Refresh Refreshes the status data Auto Refresh Allows the web browser to automatically refresh at the interval determined in the Control Panel menu. Figure 2-3 User Buttons restart button 2-8 68P09285A67-D MAR 2008 Chapter Basic Configuration ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 68P09285A67-D MAR 2008 3-1 Basic Configuration Overview Chapter 3: Basic Configuration Basic Configuration Overview ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Once the CPE set up has been completed, you can login to your CPE from any computer on your home network by typing the device name in the address bar. The default device name is mywimax. The Basic Configuration Menus that are available are: • Personalize • Internet • Status Personalize Menu The Personalize menu provides the following tabs: • Password • Device Time • Device Name • Restore Factory Settings Figure 3-1 3-2 Personalize Menu 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Personalize Menu Password Tab The password tab allows you to enable/disable password protection. The Setup Wizard automatically enables Password Protection. When Password Protection is enabled, users are prompted for and must supply the correct password prior to gaining access the CPE. Table 3-1 Password Fields Field or Button Enable Login Password Protection Description Checking this box will require login password protection. Password will always be motorola. Device Time Tab The Device Time tab allows you to establish the time zone for your location. It also allows you to automatically adjust for Daylight Savings Time if applicable. Be sure to click the Apply button when finished Table 3-2 Device Time Fields Field or Button Description Current Local Time Shows the current local date and time Time Zone Select your local time zone from the drop down box Auto Adjust for Daylight Savings Time Check this box if your location observes Daylight Savings Time (default is checked). Device Name Tab The Device Name tab allows you to re-name your CPE device. This is the Device Name you enter on an internet browser address bar to access your CPE device. For example, during the setup process you typed http://mywimax.. “mywimax.” is the device name. If you change the Device Name, subsequent logins would require you to type in the new Device Name. Be sure to click the Apply button when finished. Table 3-3 Device Name Fields Field or Button New Device Name 68P09285A67-D Description Enter the new name for the CPE device. Maximum 20 characters. 3-3 MAR 2008 Internet Menu Chapter 3: Basic Configuration Restore Factory Settings Tab The Restore Factory Settings Tab will reset your CPE to the manufacturer’s default settings. Be sure to click the Apply button when finished. CAUTION Only perform a Restore Factory Settings tab under the guidance of your service provider. Table 3-4 Restore Factory Settings Fields Field or Button Restore Factory Settings Description Checking this box will restore the CPE to factory default settings. The device will restart when you click Apply. Internet Menu The Internet menu provides the following tabs: 3-4 • WiMAX Security • Internet Protocol • Firewall • Dynamic DNS 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Figure 3-2 Internet Menu CPE Internet Menu WiMAX Security Tab The WiMAX Security tab will contain your authentication method. Check with your service provider to determine if they require a user name and password for authentication purposes. Be sure to click the Apply button when finished. Table 3-5 WiMAX Security Fields Field or Button Description Authentication Method Drop down box allows you to select either EAP-TLS (default) or EAP-TTLS/MS-CHAPv2 User Name (EAP-TTLS/MS-CHAPv2 only) Enter the User Name supplied by your service provider. Password (EAP-TTLS/MS-CHAPv2 only) Enter the Password supplied by your service provider. Password Confirmation (EAP-TTLS/MS-CHAPv2 only) Re-enter the Password supplied by your service provider. Realm Enter the Realm as supplied by your service provider. 68P09285A67-D 3-5 MAR 2008 Internet Menu Chapter 3: Basic Configuration Internet Protocol Tab CAUTION Please check with your service provider for these settings. If you are unsure of the settings, leave the default values set and click the Apply button. If your service provider has instructed you to change any of these settings, be sure to click the Apply button when you are finished. Firewall Tab A firewall helps to protect your home network from unauthorized access. It will also help to manage authorized access from the Internet to your CPE. Be sure to click the Apply button when finished. Table 3-6 Firewall Fields Field or Button Description Enable Firewall Check this box to enable the firewall for your home network. Enable Web Login from Internet Check this box to enables you to access your CPE device from a network other than your own. Web Login Port from Internet This is a non-editable field. Enable ping from Internet Enables the CPE to respond to a ping from the Internet. This option would be enabled to allow testing only. Do not leave this enabled. Dynamic DNS Tab Dynamic Domain Name Service (DDNS) allows a user with a non-static IP address to keep their domain name associated with an ever changing IP address. As an example, DDNS is used when you are hosting your own website. Be sure to click the Apply button when finished. Table 3-7 Dynamic DNS Fields Field or Button Description Enable DDNS Check this box to Enable DDNS (default is unchecked) DDNS Service Provider Select DDNS Service Provider that you belong to from the drop down box. DDNS User Name Only valid if Enable DDNS is checked. Enter your DDNS account user name. Continued 3-6 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Table 3-7 Status Menu Dynamic DNS Fields (Continued) Field or Button Description DDNS Password Only valid if Enable DDNS is checked. Enter your DDNS account password. DDNS Host Name Only valid if Enable DDNS is checked. Enter the DDNS Host Name. This is assigned by the DDNS service. Status Menu Use the status window to check the status of your WiMAX wireless broadband internet connection. Figure 3-3 CPE Status Menu This completes the Basic Configuration information for your CPEo400 unit. The rest of the manual contains Advanced User information for use in conjunction with your Service Provider’s support. 68P09285A67-D MAR 2008 3-7 Status Menu 3-8 Chapter 3: Basic Configuration 68P09285A67-D MAR 2008 Chapter Advanced Configuration ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 68P09285A67-D MAR 2008 4-1 Advanced Configuration Overview Chapter 4: Advanced Configuration Advanced Configuration Overview ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ The Advanced Configuration section describes the following advanced menus: • Port Forwarding • Local Address • Control Panel NOTE Contact your service provider for support with this functions. Port Forwarding Menu Port forwarding enables you to direct incoming traffic to specific LAN hosts (computers on your network) based on the protocol and port number. The port forwarding menu provides the following tabs: • Basic • Forwarding Figure 4-1 4-2 CPE Port Forwarding Menu New 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Local Address Menu Basic Tab Be sure to click the Apply button when finished. Table 4-1 Port Forwarding Basic Fields Field or Button Description Enable UPnP IGD Enables Universal Plug and Play (UPnP) Internet Gateway Device (IGD) profile to allow certain Windows applications to setup the port forwarding rule dynamically when NAT is enabled on this device. DMZ (De-Militarized Zone) IP Address Enter the DMZ IP Address Forwarding Screen Click on the ADD button to create additional Port Forwarding rules. Be sure to click the Apply button when finished. Table 4-2 Port Forwarding Forwarding Screen Fields Field or Button Description Select Select a box when you want to delete the specific row. Protocol Select TCP (Transmission Control Protocol) or UDP (User Datagram Protocol). WAN Port Start Enter the beginning port range for external network access. WAN Port End Enter the ending port range for external network access. LAN IP Address Enter the IP address to host the service. LAN Port Start Enter the beginning port range for internal network access. LAN Port End Enter the ending port range for internal network access. Enabled Check to enable specific port forwarding. Local Address Menu The Local Address menu allows you to configure your Local Area Network (LAN) connections. The Local Address menu provides the following tabs: • DHCP Server • Lease Status • Lease Reservation 68P09285A67-D 4-3 MAR 2008 Local Address Menu Figure 4-2 Chapter 4: Advanced Configuration CPE Local Address Menu DHCP Server Tab The DHCP Server Tab enables Dynamic Host Configuration Protocol (DHCP) server functionality on the LAN, allowing the CPE to dynamically assign lease IP addresses to clients that connect to it from the local network. Be sure to click the Apply button when finished making any changes Table 4-3 DHCP Server Fields Field or Button Description Enable DHCP Server If selected, the DHCP server on the gateway assigns IP addresses to the computers and other hosts on your network if they have DHCP enabled. By default, the gateway server is enabled. If there is another DHCP server running on your network (on another router), you must disable one of the DHCP servers. DHCP Server IP Address Enter the port forwarding LAN Client IP Address. DHCP Starting IP Address Sets the first IP address assigned by the DHCP server, in dotted-decimal format. It must be greater than the IP address value of the gateway. For example, if the IP address of the gateway is 192.168.15.1 (default), the starting IP address must be 192.168.15.2 (or higher) Continued 4-4 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Table 4-3 Local Address Menu DHCP Server Fields (Continued) Field or Button Description DHCP Ending IP Address Sets the final IP address assigned by the DHCP server. If the DHCP server runs out of DHCP addresses, users cannot access network resources. If this happens, increase the Ending IP or reduce the Lease Time. DHCP Lease Time Sets the time, in seconds, that a network computer remains connected to the gateway using its current assigned IP address. At the end of this time, the DHCP server renews the lease or assigns the computer a new IP address. The default is 3600 seconds (1 hour). The maximum is 999999 seconds (approx. 278 hours). Lease Status Tab The Lease Status tab in the Local Address menu displays the active DHCP leases since the last reboot. Be sure to click the Apply button when finished making any changes. Table 4-4 Lease Status Fields Field or Button Description Client Host Name Displays the client host name. The Name field is limited to 20 characters (only 5 appear in display) MAC Address Media Access Control (MAC) address. IP Address Shows the IP Address for each active lease. Remaining Lease Duration Shows the amount of time, in seconds, remaining in the lease. When the Remaining Lease Duration reaches 0, a new IP address will automatically be assigned. Lease Reservation Tab The lease reservation tab manages the lease reservations to ensure the same client gets the same IP address every time. Be sure to click the Apply button when finished making any changes Table 4-5 Lease Reservation Fields Field or Button Select Description Select this box if you want to delete an established lease reservation. Be sure to click the Delete button once you have selected your exception to be deleted. Continued 68P09285A67-D 4-5 MAR 2008 Control Panel Menu Chapter 4: Advanced Configuration Table 4-5 Lease Reservation Fields (Continued) Field or Button Description Client Host Name Enter the client host name. The Name field is limited to 20 characters (only 5 appear in display) MAC Address Media Access Control (MAC) address. Enter the MAC address of the device. IP Address Enter the IP address that you want assigned to the MAC Address. Enabled Checking this box enables the lease reservation. Control Panel Menu The Control Panel sections allows you to view/update your software information. The Control Panel menu provides access to the following tabs: • Software • Certificate • System • About Figure 4-3 4-6 CPE Control Panel Menu 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Control Panel Menu Software Tab The Software Tab manages the software on your CPE device. It is also where you can upgrade device software. CAUTION Do not upgrade or remove software without first contacting your service provider. Table 4-6 Software Tab Fields Field or Button Description Browse Use this button to browse your computer for additional software packages. Upgrade Click this button once you have located the software package/update you would like to add to your device. View Use this button to view any available software packages. Install Click this button once you have selected an available software package that you would like installed. Uninstall Select the software package you would like removed and select this button. Certificate Tab The certificate tab is where you manage the certificates that are stored on the device. Use the BROWSE button to locate the certificate file on your computer, and then click the IMPORT button. Use the REMOVE button to remove any selected certificate(s). System Tab This tab allows you to manage additional features of your CPE device. Be sure to click the Apply button when finished making any changes Table 4-7 System Tab Fields Field or Button Description Language Used in User Interface Select the desired language for the user interface. The default language is English. Enable WiMAX Radio Interface Check this box to enable the WiMAX Radio Interface. If this box is disabled, the WiMAX radio will not transmit any signal. Continued 68P09285A67-D 4-7 MAR 2008 Control Panel Menu Table 4-7 Chapter 4: Advanced Configuration System Tab Fields (Continued) Field or Button Description Auto Refresh Interval Enter, in seconds, the interval for status Auto Refresh. Valid range is 1 second - 9999 seconds. Re-bootstrap EMS (Element Management System) Check this box to reconnect the device with the EMS. NOTE Only perform this function under the supervision of a Customer Support Representative. Enable Buzzer Check this box to enable/disable the buzzer for the initial set-up and installation of your CPE device. The default is enabled (checked). About Tab The About Tab will display basic properties of your CPE device such as: Product Name, Model ID, Hardware Version, Serial Number and the WiMAX MAC Address. 4-8 68P09285A67-D MAR 2008 Chapter Glossary and Troubleshooting ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 68P09285A67-D MAR 2008 5-1 Glossary of Terms Chapter 5: Glossary and Troubleshooting Glossary of Terms ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Below is a list of acronyms and their definitions. Glossary Table 5-1 Glossary Terms Acronym 5-2 Definition CPE Customer Premise Equipment EMS Element Management System IEEE Institute of Electrical and Electronic Engineers IP Internet Protocol LOS Line Of Site MAC Media Access Control NLOS Non-Line Of Site VoIP Voice Over Internet Protocol Wi-Fi Wireless Fidelity WiMAX Worldwide Interoperability for Microwave Access WLAN Wireless Local Area Network 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Basic Troubleshooting Overview Basic Troubleshooting Overview ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ This section provides basic troubleshooting for your CPEo400 device. A Computer Cannot Log On to the CPE Check that the Ethernet cable is properly connected to the CPE unit and the computer. Cannot Connect to the Internet Check the Outdoor CPE connection status from the Web Interface, refer to the Connection Status section to verify the connection status. If the Outdoor CPE connection is down, and the gateway has not received an IP for 5 to 10 minutes, rerun the setup wizard. Additional Troubleshooting Support Please contact your service provider for additional Troubleshooting Support. 68P09285A67-D MAR 2008 5-3 Additional Troubleshooting Support 5-4 Chapter 5: Glossary and Troubleshooting 68P09285A67-D MAR 2008 Chapter Configuring TCP/IP and DNS Settings ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 68P09285A67-D MAR 2008 6-1 Configuring TCP/IP Chapter 6: Configuring TCP/IP and DNS Settings Configuring TCP/IP ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ This chapter is needed for setup procedures. Refer to for more information regarding this chapter. All client computers on your network must be configured for TCP/IP (the protocol that controls communication among computers). Perform one of: • Configuring TCP/IP in Windows 2000 • Configuring TCP/IP in Windows XP NOTE Follow the instructions in your Macintosh or UNIX user manual. Configuring TCP/IP in Windows 2000 1. On the Windows Desktop, click Start. 2. Select Settings and then Control Panel from the pop-up menus to display the Control Panel window: Figure 6-1 6-2 Windows Control Panel 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide 3. Configuring TCP/IP in Windows 2000 Double-click the Network and Dial-up Connections icon to display the Network and Dial-up Connections window: Figure 6-2 Network and Dial-up Connections In the steps that follow, a connection number like 1, 2, 3, etc., is a reference that is displayed on computers with multiple network interfaces. Computers with only one network interface may only see the label: Local Area Connection. 4. Click Local Area Connection number. The value of number varies from system to system. The Local Area Connection number Status window is displayed: Figure 6-3 5. 68P09285A67-D Local Area Connection Click Properties. Information similar to the following window is displayed: 6-3 MAR 2008 Configuring TCP/IP in Windows 2000 Figure 6-4 6. Chapter 6: Configuring TCP/IP and DNS Settings Properties If Internet Protocol (TCP/IP) is in the list of components, TCP/IP is installed. You can skip to Step 10 If Internet Protocol (TCP/IP) is not in the list, click Install. The Select Network Component Type window is displayed: Figure 6-5 7. 6-4 Select Network Connection Type Click Protocol on the Select Network Component Type window and click Add. The Select Network Protocol window is displayed: 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Figure 6-6 Configuring TCP/IP in Windows 2000 Select Network Protocol 8. Click Internet Protocol (TCP/IP).. 9. Click OK. The Local Area Connection number Properties window is re-displayed. 10. Be sure the box next to Internet Protocol (TCP/IP) is checked. 11. Click Properties. The Internet Protocol (TCP/IP) Properties window is displayed: Figure 6-7 Internet Protocol (TCP/IP) Properties 12. Be sure Obtain IP address automatically and Obtain DNS server address automatically are selected. 13. Click OK to accept the TCP/IP settings. 68P09285A67-D 6-5 MAR 2008 Configuring TCP/IP in Windows XP Chapter 6: Configuring TCP/IP and DNS Settings 14. Click Close to close the Local Area Connection number Properties window. 15. Click OK when prompted to restart the computer and click OK again. Configuring TCP/IP in Windows XP 1. On the Windows desktop, click Start to display the Start window: Figure 6-8 2. Click Control Panel to display the Control Panel window. The display varies, depending on your Windows XP view options. If the display is a Category view as shown below, continue with Step 3. Otherwise, skip to Step 5 Figure 6-9 6-6 Windows XP Start Window Control Panel 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide 3. Configuring TCP/IP in Windows XP Click Network and Internet Connections to display the Network and Internet Connections window: Figure 6-10 Network and Internet Connections 4. Click Network Connections. Skip to Step 6. 5. If a classic view similar to below is displayed, double-click Network Connections to display the LAN or High-speed Internet connections. Figure 6-11 6. 68P09285A67-D Control Panel Classic View Right-click the Local Area Connection. If more than one connection is displayed, be sure to select the one for your network interface. 6-7 MAR 2008 Configuring TCP/IP in Windows XP Figure 6-12 7. Network Connections Select Properties from the pop-up menu to display the Local Area Connection Properties window: Figure 6-13 6-8 Chapter 6: Configuring TCP/IP and DNS Settings Local Area Connection Properties 8. On the Local Area Connection Properties window, select Internet Protocol (TCP/IP) if it is not selected. 9. Click Properties to display the Internet Protocol (TCP/IP) Properties window: 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Figure 6-14 Configuring TCP/IP in Windows XP Internet Protocol (TCP/IP) Properties 10. Be sure Obtain IP address automatically and Obtain DNS server address automatically are selected. 11. Click OK to close the TCP/IP Properties window. 12. Click OK to close the TCP/IP Properties window. Click OK to close the TCP/IP Properties window. 68P09285A67-D MAR 2008 6-9 Configuring TCP/IP in Windows XP 6-10 Chapter 6: Configuring TCP/IP and DNS Settings 68P09285A67-D MAR 2008 Chapter Important Safety and Legal Information ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 68P09285A67-D MAR 2008 7-1 Important Safety Information Chapter 7: Important Safety and Legal Information Important Safety Information ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Your Motorola WiMAX Wireless Broadband Gateway is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to RF electromagnetic energy. This Product complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • American National Standards Institute (ANSI)/ Institute of Electrical and Electronic Engineers (IEEE) C95 1-2005 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation Human Exposure) Standard, 2003 • ANATEL ANNEX to Resolution No. 303 of July 2, 2002 “Regulation of Limitation of Exposure to Electrical, Magnetic, and Electromagnetic Fields in the Radio Frequency Range Between 9 kHz and 300 GHz” and “Attachment to Resolution #303 from July 2, 2002” RF Exposure Compliance and Guidelines Operating Instructions To comply with FCC RF energy exposure requirements, this Gateway transmitter should be operated at a minimum separation distance of 55 cm from all persons. For additional information on exposure requirements or other training information, visit http://www.motorola.com/rfhealth FCC Regulatory Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 7-2 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide This Product complies with the following RF energy exposure standards and guidelines: EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC IEC 60950-1: 2001 ( 1st Edition ) Safety of Information Technology Equipment EN50385 : (2002-08) Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) General public EN 301 489-1 V1.6.1: (2005-09) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-4 V1.3.1: (2002-08) Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment and services EN 302 326-2 V1.1.1(2006-03) Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment EN 302 326-3 V1.1.1(2006-03) Fixed Radio Systems; Multipoint Equipment and Antennas; Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Multipoint Radio Antennas Table 7-1 Compliance Statement Language Česky [Czech] Statement [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Continued 68P09285A67-D 7-3 MAR 2008 This Product complies with the following RF energy exposure standards and guidelines: 7: Important Safety and Legal Information Table 7-1 Chapter Compliance Statement (Continued) Language Statement Dansk [Danish] Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. λληνικ [Greek] Ω Ω [name of manufacturer] [type of equipment] Ω 1999/5/ Français [French] Par la présente [nom du fabricant] déclare que l’appareil [type d’appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar šo [name of manufacturer / izgatavotaja nosaukums] deklare, ka [type of equipment / iekartas tips] atbilst Direktivas 1999/5/EK butiskajam prasibam un citiem ar to saistitajiem noteikumiem. Continued 7-4 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide This Product complies with the following RF energy exposure standards and guidelines: Table 7-1 Compliance Statement (Continued) Language Statement Lietuvi˛ u [Lithuanian] Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal--htiġijiet essenzjali u ma provvedimenti o-hrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português [Portuguese] [Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian] [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] [Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish] [Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish] Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. 68P09285A67-D 7-5 MAR 2008 This Product complies with the following RF energy exposure standards and guidelines: 7: Important Safety and Legal Information Chapter In compliance with national requirements, a power supply cord with a cross-sectional area of 0.75mm2 minimum for each individual conductor, will be provided when the product is sumitted for national approval. 7-6 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Caring for the Environment Caring for the Environment ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ The following information is provided to enable regulatory compliance with the European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic Equipment (WEEE) when using Motorola Networks equipment in EU countries. Disposal of Motorola Equipment in EU Countries his product is compliant with the requirements of the European Union Restriction of Hazardous Substances (EU RoHS) directive. Figure 7-1 EU RoHS Please do not dispose of Motorola Networks equipment in landfill sites. In the EU, Motorola Networks in conjunction with a recycling partner will ensure that equipment is collected and recycled according to the requirements of EU environmental law. Disposal of Motorola Networks Equipment in Non EU Countries In non-EU countries, dispose of Motorola Networks equipment in accordance with national and regional regulations. CMM Disclosure The China Management Methods (CMM) Disclosure Table is intended only to communicate compliance with China requirements; it is not intended to communicate compliance with EU RoHS or any other environmental requirements. 68P09285A67-D 7-7 MAR 2008 CMM Disclosure Figure 7-2 7-8 Chapter 7: Important Safety and Legal Information China Management Methods (CMM) Disclosure Table 68P09285A67-D MAR 2008 WiMAX CPEo400 Series User Guide Copyrights and Trademarks Copyrights and Trademarks ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Notice While reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Motorola, Inc. reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Motorola, Inc. does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Motorola products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Motorola intends to announce such Motorola products, programming, or services in your country. Copyrights This instruction manual, and the Motorola products described in this instruction manual may be, include or describe copyrighted Motorola material, such as computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Motorola and its licensors contained herein or in the Motorola products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, as arises by operation of law in the sale of a product. Usage Disclosure Restrictions License Agreements The software described in this document is the property of Motorola, Inc and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. 68P09285A67-D 7-9 MAR 2008 Usage Disclosure Restrictions Chapter 7: Important Safety and Legal Information Copyrighted Materials Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Motorola, Inc. High Risk Materials Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities). Motorola and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities. Trademarks MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc., 2007 7-10 68P09285A67-D MAR 2008 motorola.com CPEo 400 Series 68P09285A67-D 68P09285A67-D MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc., 2008. PMS 4505 C Best_L2R_V --Black PC Version 100% Folds to: 8.5 inches + spine width x 11.0 inches height All text and images are FPO. Overall gloss aqueous coating.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2008:03:10 16:58:44-05:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2008:03:20 14:13:05-06:00 Metadata Date : 2008:03:20 14:13:05-06:00 Format : application/pdf Title : Creator : Document ID : uuid:b8ab8c33-3442-428c-b8a8-fe3b989a2f33 Instance ID : uuid:88b40201-3550-4b3d-85b0-cdf651c331f5 Has XFA : No Page Count : 63 Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools