Nokia of America BBTRX-21 PCS LTE 9764 Metro Cell Outdoor Transceiver System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2520805
Application ID	+trNWxszAr0HekaHOMf1rA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	221.6kB (2769996 bits)
Date Submitted	2015-02-02 00:00:00
Date Available	2015-03-19 00:00:00
Creation Date	2014-12-19 20:14:47
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2015-01-29 19:28:34
Document Title	FCC Filing for AS5BBTRX-21 PCS LTE 9764 MetroCell MetroDock_Outdoor_Exhibits 1-10 rev-3
Document Creator	PScript5.dll Version 5.2.2
Document Author:	W.S. Majkowski

APPLICANT: Alcatel-Lucent USA Inc.
-13 -
FCC ID: AS5BBTRX-21
Exhibit 6 – Instruction Book
Confidential
SECTION 2.1033(c) (3)
A copy of the installation and operating instructions to be furnished the user. A draft copy of the instructions may be
submitted if the actual document is not available. The actual document shall be furnished to the FCC when it becomes
available.
Response: The installation and operating instructions for the Alcatel-Lucent’s PCS LTE 9764 Metro Cell Outdoor
Transceiver System FCC ID: AS5BBTRX-21 is attached.
The Installation Manual in this exhibit, Alcatel-Lucent 9764 Metro Cell Outdoor LTE 2x1W and 2x2W Hardware
Installation, 3MN-01707-0002-RJZZA Issue 3.05 | October 2014, is not furnished to the user, except under very
exceptional and very limited circumstances. This manual contains highly proprietary circuit, equipment and
architecture descriptions that must not be made available for public inspection.
The cover/title page is explicitly labeled:
“Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction”.
This information is proprietary both to Alcatel- Lucent and to Alcatel- Lucent’s contracted manufacturer/supplier.
(ALCATEL-LUCENT USA CONFIDENTIAL PROPRIETARY INFORMATION)
Alcatel-Lucent USA Inc. - Proprietary
Use pursuant to Company Instructions.
13
Proprietary Use pursuant to Company instruction
DRAFT
Title page
Alcatel-Lucent 9764
Metro Cell Outdoor LTE 2x1W and 2x2W
Hardware Installation
3MN-01707-0002-RJZZA
Issue 3.05 | October 2014
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
DRAFT
DRAFT
Proprietary Use pursuant to Company instruction
Legal notice
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2014 Alcatel-Lucent. All rights reserved.
DRAFT
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
DRAFT
Contents
About this document
Purpose
.......................................................................................................................................................................................... xiii
xiii
What's new
................................................................................................................................................................................... xiii
xiii
Intended audience
...................................................................................................................................................................... xiv
xiv
Supported systems
..................................................................................................................................................................... xiv
xiv
How to use this document
Safety information
Prerequisites
....................................................................................................................................................... xiv
xiv
..................................................................................................................................................................... xiv
xiv
................................................................................................................................................................................. xiv
xiv
Conventions used ......................................................................................................................................................................... xv
xv
Related information
................................................................................................................................................................. xvii
xvii
Document support ...................................................................................................................................................................... xix
xix
Technical support
....................................................................................................................................................................... xix
xix
How to order .................................................................................................................................................................................. xx
xx
How to comment .......................................................................................................................................................................... xx
xx
Safety statements
Overview ...................................................................................................................................................................................... 1-1
1-1
Structure of safety statements ............................................................................................................................................... 1-2
1-2
Safety
........................................................................................................................................................................................... 1-4
1-4
Safety - specific hazards ......................................................................................................................................................... 1-5
1-5
Product safety ............................................................................................................................................................................. 1-9
1-9
Product overview
Overview ...................................................................................................................................................................................... 2-1
2-1
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
iii
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Functional description ............................................................................................................................................................. 2-2
2-2
DRAFT
Contents
....................................................................................................................................................................................................................................
Physical description
................................................................................................................................................................. 2-4
2-4
Supported installation options
........................................................................................................................................... 2-13
2-13
Hardware and ancillary items
............................................................................................................................................ 2-17
2-17
Installation of the 9764 Metro Dock
Overview ...................................................................................................................................................................................... 3-1
3-1
9764 Metro Dock pre-installation
Overview ...................................................................................................................................................................................... 3-2
3-2
9764 Metro Dock Pre-installation information .............................................................................................................. 3-3
3-3
Pole mount installation requirements ................................................................................................................................ 3-5
3-5
Wall mount installation requirements ................................................................................................................................ 3-9
3-9
Pair mount and daisy chain requirements ...................................................................................................................... 3-13
3-13
9764 Metro Dock installation
Overview
................................................................................................................................................................................... 3-18
3-18
Procedure 3-1: Pole mount the 9764 Metro Dock ...................................................................................................... 3-19
3-19
Procedure 3-2: Pole mount the 9764 Metro Dock using optional tilt brackets ................................................ 3-25
3-25
Procedure 3-3: Wall mount the 9764 Metro Dock
..................................................................................................... 3-35
3-35
Procedure 3-4: Wall mount the 9764 Metro Dock using optional tilt brackets
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair configuration
............................................... 3-40
3-40
........................................................ 3-54
3-54
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair configuration ........................................................ 3-71
3-71
9764 Metro Dock cabling
Overview
................................................................................................................................................................................... 3-89
3-89
Procedure 3-7: 9764 Metro Dock ground cabling ...................................................................................................... 3-90
3-90
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber optic
.......................................................................... 3-92
3-92
Procedure 3-9: 9764 Metro Dock Ethernet cabling - electrical ............................................................................. 3-99
3-99
DRAFT
9764 Metro Dock post-installation
Overview
................................................................................................................................................................................. 3-111
3-111
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
iv
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
....................................................................................................................................................................................................................................
Procedure 3-10: Final installation activities and checks ........................................................................................ 3-112
3-112
Installation of the 9764 MCO module
DRAFT
Contents
Overview ...................................................................................................................................................................................... 4-1
4-1
9764 MCO pre-installation
Overview ...................................................................................................................................................................................... 4-2
4-2
Pre-installation information
.................................................................................................................................................. 4-3
4-3
9764 MCO cabling
Overview ...................................................................................................................................................................................... 4-4
4-4
Procedure 4-1: Connect external RF antenna to the Alcatel-Lucent 9764 MCO LTE 2x2W ....................... 4-5
4-5
Procedure 4-2: Connect GPS antenna
............................................................................................................................... 4-7
4-7
Procedure 4-3: 9764 MCO module ground cabling ................................................................................................... 4-18
4-18
Site power requirements (AC) ........................................................................................................................................... 4-21
4-21
Site power requirements (DC) ........................................................................................................................................... 4-24
4-24
Product power requirements ............................................................................................................................................... 4-27
4-27
Procedure 4-4: Connect power cable
.............................................................................................................................. 4-29
4-29
9764 MCO installation
Overview
................................................................................................................................................................................... 4-40
4-40
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock .......................................................................... 4-41
4-41
Procedure 4-6: Orient 9764 MCO module
................................................................................................................... 4-48
4-48
9764 MCO post-installation
Overview
................................................................................................................................................................................... 4-50
4-50
Procedure 4-7: Post installation activities
..................................................................................................................... 4-51
4-51
Procedure 4-8: Power on the 9764 MCO
...................................................................................................................... 4-52
4-52
LED State Description
Overview ..................................................................................................................................................................................... A-1
A-1
......................................................................................................................................... A-2
A-2
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
LED status for 9764 MCO LTE
DRAFT
Contents
....................................................................................................................................................................................................................................
Installation of the 9764 MCO Wi-Fi AP
Overview ..................................................................................................................................................................................... B-1
B-1
Physical description
................................................................................................................................................................ B-2
B-2
9764 MCO Wi-Fi AP pre-installation information ...................................................................................................... B-8
B-8
Procedure B-1: Remove 9764 MCO module from 9764 Metro Dock
................................................................. B-9
B-9
Procedure B-2: Attach 9764 MCO Wi-Fi AP module to 9764 MCO module ................................................. B-19
B-19
LED state description - 9764 MCO Wi-Fi AP ............................................................................................................ B-25
B-25
Product conformance statements
Overview ..................................................................................................................................................................................... C-1
C-1
United States compliance
Introduction ................................................................................................................................................................................ C-2
C-2
Federal Communications Commission ............................................................................................................................ C-3
C-3
Product safety and RF exposure ......................................................................................................................................... C-4
C-4
FDA/IEC optical transmitter product compliance statements ................................................................................. C-5
C-5
Eco-environmental statements
............................................................................................................................................ C-6
C-6
European Union
Introduction ................................................................................................................................................................................ C-7
C-7
CE marking
................................................................................................................................................................................ C-8
C-8
EMC and radio spectrum compliance
.............................................................................................................................. C-9
C-9
Product safety and RF exposure ....................................................................................................................................... C-10
C-10
Eco-environmental statements .......................................................................................................................................... C-13
C-13
Document issue history
Overview ..................................................................................................................................................................................... D-1
D-1
Document issue history
......................................................................................................................................................... D-2
D-2
DRAFT
Glossary
Index
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
vi
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
List of tables
Document changes from Issue 3.03, September 2014
................................................................................. xiii
Terminology
Related documents
2-1
GPS antenna options
3-1
Pole mount installation kits and brackets
3-2
Wall mount installation brackets
4-1
Power materials
B-1
9764 MCO Wi-Fi AP physical characteristics
B-2
9764 MCO Wi-Fi AP LEDs during boot-up ................................................................................................. B-25
B-3
9764 MCO Wi-Fi AP LEDs based on Admin status and WLAN mapping
B-4
9764 MCO Wi-Fi AP LEDs during normal operation states
C-1
Distances corresponding to reference levels for the general public and workers at maximum Tx
power ....................................................................................................................................................................... C-11
C-11
C-2
Distances corresponding to reference levels for the general public and workers at maximum Tx
power ....................................................................................................................................................................... C-12
C-12
D-1
Document changes from Issue 3, September 2014
D-2
Document changes from Issue 2,June 2014 .................................................................................................... D-2
D-3
Document changes from Issue 1.06, May 2014
............................................................................................ D-3
D-4
Document changes from Issue 1.05, May 2014
............................................................................................ D-3
D-5
Document changes from Issue 1.04, April 2014
........................................................................................... D-4
D-6
Document changes from Issue 1.03, February 2014
D-7
Document changes from Issue 1.02, January 2014 ...................................................................................... D-4
D-8
Document changes from Issue 1.01, December 2013
D-9
Document changes from Issue 1, November 2013
.................................................................................................................................................................. xv
xv
................................................................................................................................................... xvii
xvii
.............................................................................................................................................. 2-11
......................................................................................................... 3-6
.......................................................................................................................... 3-9
....................................................................................................................................................... 4-27
4-27
............................................................................................... B-4
...................................... B-26
.................................................................. B-27
...................................................................................... D-2
................................................................................... D-4
................................................................................. D-5
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
vii
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
...................................................................................... D-5
DRAFT
DRAFT
List of tables
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
viii
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
List of figures
2-1
9764 Metro Dock and 9764 MCO LTE 2x1W and Alcatel-Lucent 9764 Metro Cell Outdoor LTE
2x2W ........................................................................................................................................................................... 2-4
2-4
2-2
9764 MCO LTE with 9764 MCO Wi-Fi AP
2-3
9764 MCO LTE module connection interfaces
2-4
9764 MCO LTE module connection interfaces - double lug ground point detail
2-5
Installation examples
2-6
9764 MCO Wi-Fi AP module attached to 9764 MCO LTE module (front view)
2-7
9764 MCO daisy chain installation example
2-8
9764 MCO pair-mount installation example ................................................................................................. 2-16
3-1
Pole mount banding and brackets
3-2
9764 Metro Dock pole mount using screws
3-3
9764 Metro Dock pole mount using banding
3-4
Double 9764 Metro Dock pole mount
3-5
Wall mount brackets ............................................................................................................................................... 3-10
3-10
3-6
9764 Metro Dock wall mount (no tilt) ............................................................................................................. 3-11
3-7
9764 Metro Dock wall mount (with tilt) ......................................................................................................... 3-11
3-8
Double 9764 Metro Dock wall mount ............................................................................................................. 3-12
4-1
External GPS antenna configuration
4-2
External GPS antenna connector
4-3
GPS antenna connection
4-4
Weatherproof tape placement for external GPS antenna
4-5
Internal and external GPS antenna connectors
4-6
GPS antenna connection
4-7
Weatherproof tape placement for external GPS antenna
.................................................................................................... 2-5
.............................................................................................. 2-9
.............................. 2-9
............................................................................................................................................. 2-13
2-13
........................... 2-14
................................................................................................ 2-15
........................................................................................................................ 3-6
.................................................................................................... 3-7
.................................................................................................. 3-8
............................................................................................................... 3-8
.................................................................................................................. 4-7
....................................................................................................................... 4-10
...................................................................................................................................... 4-10
.......................................................................... 4-11
............................................................................................. 4-12
...................................................................................................................................... 4-13
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
ix
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
.......................................................................... 4-14
DRAFT
DRAFT
List of figures
....................................................................................................................................................................................................................................
4-8
Bridge cable between external and internal GPS antenna connectors
................................................. 4-15
4-9
Internal/external GPS antenna connector
4-10
Weatherproof tape placement for external GPS antenna
4-11
connection interfaces
A-1
Location of LED
B-1
9764 MCO Wi-Fi AP attached to 9764 MCO hardware variants ............................................................ B-2
B-2
9764 MCO Wi-Fi AP - closed housing
B-3
9764 MCO Wi-Fi AP - cutaway view
B-4
9764 MCO Wi-Fi AP connection point on 9764 MCO
B-5
9764 MCO Wi-Fi AP connected to 9764 MCO (cutaway side view)
B-6
9764 Metro Dock to LTE 9764 MCO module grounding cable
B-7
Key extension
B-8
Pull 9764 MCO module from Metro Dock ................................................................................................... B-16
B-9
AC power line connector ..................................................................................................................................... B-16
B-10
DC power line connector ..................................................................................................................................... B-17
B-11
9764 MCO Wi-Fi AP module attached to 9764 MCO module .............................................................. B-17
B-12
Wi-Fi AP connector cover on 9764 MCO module
B-13
Wi-Fi AP connector on 9764 MCO module
B-14
9764 MCO Wi-Fi AP module attached to 9764 MCO module .............................................................. B-22
....................................................................................................... 4-16
.......................................................................... 4-17
............................................................................................................................................. 4-29
4-29
....................................................................................................................................................... A-2
A-2
............................................................................................................. B-3
............................................................................................................... B-3
.............................................................................. B-5
................................................... B-5
........................................................... B-13
.......................................................................................................................................................... B-13
B-13
..................................................................................... B-21
................................................................................................. B-21
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
3
DRAFT
List of procedures
Installation of the 9764 Metro Dock
3-1
Pole mount the 9764 Metro Dock
3-2
Pole mount the 9764 Metro Dock using optional tilt brackets
3-3
Wall mount the 9764 Metro Dock ..................................................................................................................... 3-35
3-4
Wall mount the 9764 Metro Dock using optional tilt brackets ............................................................... 3-40
3-5
Pole mount the 9764 Metro Dock in a pair configuration ........................................................................ 3-54
3-6
Wall mount the 9764 Metro Dock in a pair configuration
3-7
9764 Metro Dock ground cabling
3-8
9764 Metro Dock Ethernet cabling - fiber optic .......................................................................................... 3-92
3-9
9764 Metro Dock Ethernet cabling - electrical
3-10
Final installation activities and checks .......................................................................................................... 3-112
..................................................................................................................... 3-19
............................................................... 3-25
....................................................................... 3-71
..................................................................................................................... 3-90
............................................................................................ 3-99
Installation of the 9764 MCO module
4-1
Connect external RF antenna to the Alcatel-Lucent 9764 MCO LTE 2x2W
4-2
Connect GPS antenna ............................................................................................................................................... 4-7
4-7
4-3
9764 MCO module ground cabling
4-4
Connect power cable .............................................................................................................................................. 4-29
4-29
4-5
Attach 9764 MCO module to 9764 Metro Dock
4-6
Orient 9764 MCO module
4-7
Post installation activities ..................................................................................................................................... 4-51
4-51
4-8
Power on the 9764 MCO ...................................................................................................................................... 4-52
...................................... 4-5
.................................................................................................................. 4-18
......................................................................................... 4-41
.................................................................................................................................. 4-48
Installation of the 9764 MCO Wi-Fi AP
B-1
Remove 9764 MCO module from 9764 Metro Dock
B-2
Attach 9764 MCO Wi-Fi AP module to 9764 MCO module
................................................................................. B-9
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
xi
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
................................................................. B-19
DRAFT
DRAFT
List of procedures
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
xii
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
About this document
About this document
Purpose
The purpose of this document is to provide hardware installation instructions for an
Alcatel-Lucent 9764 Metro Cell Outdoor LTE 2x1W and an Alcatel-Lucent 9764 Metro
Cell Outdoor LTE 2x2W.
Procedures are provided for mounting, grounding, powering, and cabling the 9764 MCO
LTE 2x1W and the 9764 MCO LTE 2x2W.
What's new
This is Issue 3.05 of Alcatel-Lucent Metro Cell Outdoor LTE 2x1W and 2x2W Hardware
Installation, 3MN-01707-0002-RJZZA.
The major changes introduced in this issue of the document are described in the following
paragraphs. Changes introduced in prior issues of the document are shown in Appendix
D, “Document issue history”
Issue 3.05 (October 2014) - Document changes from the previous release
The document changes from Issue 3.03, September 2014 are shown in the following
table:
Table 1
Document changes from Issue 3.03, September 2014
Feature/enhancement
Description
Location
Added information and steps for
using weatherproof tape when
attaching external GPS antenna.
“Connect external GPS antenna - B25, B7 or B2
MCO” (p. 4-9)
Documentation changes
Connect GPS antenna
“Connect external GPS antenna to MCO - B3
MCO” (p. 4-12)
“Connect internal/external GPS antenna to
Alcatel-Lucent 9764 MCO LTE 2x2W” (p. 4-15)
Hardware and
Ancillary items
Added information about
weatherproof tape when attaching
external GPS antenna in the External
antenna – GPS table.
“Hardware and ancillary items” (p. 2-17)
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
xiii
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
About this document
....................................................................................................................................................................................................................................
Intended audience
The audience for this document is Installation personnel.
Supported systems
This document applies to the following Alcatel-Lucent 9764 Metro Cell Outdoor LTE
2x1W and Alcatel-Lucent 9764 Metro Cell Outdoor LTE 2x2W products:
•
•
•
Alcatel-Lucent 9764 Metro Cell Outdoor V1.0 B25 LTE 2x1W
Alcatel-Lucent 9764 Metro Cell Outdoor V1.1 B2 LTE 2x1W
Alcatel-Lucent 9764 MCO V1.1 B2/B25 LTE 2x1W
•
•
•
Alcatel-Lucent 9764 Metro Cell Outdoor V1.1 B7 LTE 2x1W
Alcatel-Lucent 9764 Metro Cell Outdoor V1.1 B2 LTE 2x2W
Alcatel-Lucent 9764 Metro Dock.
How to use this document
Start with the first chapter and work through the manual to the end. Once you have done
this, you will have carried out the hardware installation completely and in the proper
sequence.
Prior to installing the equipment, the installer should be familiar with the safety
precautions, warnings, and product conformance statements. Required tools and materials
recommended for installation, and a process checklist, are listed in topic “Pre-installation
information” .
Safety information
For your safety, this document contains safety statements. Safety statements are given at
points where risks of damage to personnel, equipment, and operation may exist. Failure to
follow the directions in a safety statement may result in serious consequences.
Prerequisites
DRAFT
None
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
xiv
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
....................................................................................................................................................................................................................................
Conventions used
Vocabulary conventions
DRAFT
About this document
The following vocabulary conventions are also used when referring to Alcatel-Lucent
products:
Table 2
Terminology
Term
Description/Meaning
9764 MCO
The 9764 MCO consists of the following modules: 9764 Metro
Dock module, and the 9764 MCO WCDMA module.
9764 Metro Dock
Refers to the Alcatel-Lucent 9764 Metro Dock, a module supporting
backhaul for the 9764 MCO.
9764 MCO LTE
Refers to the module that contains the complete base station,
including baseband unit, radio unit and antenna. It is attached to the
front of the 9764 Metro Dock to form the 9764 MCO.
9764 MCO V1.1
B2/B25 LTE 2x1W
Refers to the Band 2/Band 25 (combined) 2x1W variant of the 9764
MCO LTE that is the focus of this document.
9764 MCO V1.1 B2
LTE 2x2W
Refers to the Band 2 2x2W variant of the 9764 MCO LTE that is the
focus of this document.
Typographical conventions
The typographical conventions used in this document are described in the following table.
Appearance
Description
emphasis
Text that is emphasized
document titles
Titles of books or other documents
graphical user interface text
Text that is displayed in a graphical user
interface
variables
A value or command-line parameter that the
user provides
Technical conventions
Lengths and other measurements are given in metric units, with non-metric units given as
equivalents for use in non-metric markets.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
xv
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
About this document
....................................................................................................................................................................................................................................
For manufactured parts, the following system of conventions is used:
•
•
Metric sizes of nuts, bolts, flat washers, and lock washers are identified by an
uppercase letter M followed immediately by a size in millimeters (example: M10)
American fractional sizes of nuts, bolts, anchor bolts, and washers are identified by a
number followed immediately by a double apostrophe (example: 3/8"). In the case of
lengths measured in feet, “2 feet” is used rather than “2'” so that the single apostrophe
is not overlooked.
The illustrations in this document do not contain all details and exceptions, but are
intended to highlight main points. Dimensions are usually shown in millimeters, with
inches in parenthesis. As an example, 680.0 (26.77) equals 680 millimeters or 26.77
inches.
Wire gauges are specified in metric units. Equivalent sizes in the American Wire Gauge
(AWG) system are given in the following table:
Standard cross-sections and wire diameter of round copper conductors
DRAFT
The following table is from CEI/IEC 60947-1:2004, Table 1, Standard cross-sections of
round copper conductors and approximate relationship between mm 2 and AWG/kcmil
sizes for reference. Additional wire sizes are included in this document as appropriate for
the topic.
ISO rated cross-sectional area (mm2 )
AWG/kcmil size
0.2
24
0.34
22
0.5
20
0.75
18
1.5
16
2.5
14
12
10
10
16
25
35
50
0 (1/0)
70
00 (2/0)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
xvi
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
....................................................................................................................................................................................................................................
ISO rated cross-sectional area (mm2 )
AWG/kcmil size
95
000 (3/0)
0000 (4/0)
120
250 kcmil
150
300 kcmil
185
350 kcmil
400 kcmil
240
500 kcmil
300
600 kcmil
DRAFT
About this document
NOTE: The dash, when it appears, counts as a size when considering connecting capacity (see
7.1.7.2 in the standard).
Related information
For information on subjects related to the content of this document, refer to the
documents listed in the following table:
Table 3
Related documents
Refer to this document
At this location
For more information
on
Alcatel-Lucent 9764 Metro Cell
Outdoor LTE 2x1W and 2x2W Site
Preparation, 3MN-01707-0001RJZZA
9764 MCO LTE (Metro Cell Outdoor for
LTE) (https://support.alcatel-lucent.com/
portal/productContent.do?entryId=10000000003997)
9764 MCO LTE 2x1W site
preparation
Alcatel-Lucent 9764 Metro Cell
Outdoor LTE 2x1W and 2x2W
Technical Description
9764 MCO LTE (Metro Cell Outdoor for
LTE) (https://support.alcatel-lucent.com/
portal/productContent.do?entryId=10000000003997)
9764 MCO LTE 2x1W
technical overview
9764 MCO LTE (Metro Cell Outdoor for
LTE) (https://support.alcatel-lucent.com/
portal/productContent.do?entryId=10000000003997)
9764 MCO LTE 2x1W
maintenance and
troubleshooting
9YZ-04152-0056- DEZZA
(LR13.3.L)
9YZ-05817-0056- DEZZA
(LR14.1.L)
Alcatel-Lucent 9764 Metro Cell
Outdoor LTE 2x1W and 2x2W
Maintenance and Troubleshooting
9YZ-04152-0057-REZZA
(LR13.3.L)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
xvii
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
9YZ-05817-0057-REZZA
(LR14.1.L)
DRAFT
About this document
....................................................................................................................................................................................................................................
Table 3
Related documents
(continued)
Refer to this document
At this location
For more information
on
Alcatel-Lucent 9772 Wi-Fi Service
Controller V1.0 L Hardware
Installation, 3MN-01840-0001RJZZA
OnLine Customer Support (OLCS)
(http://support.alcatel-lucent.com)
Instructions for installing
the 9772 WiSC-L
hardware and accessing its
management interfaces.
Alcatel-Lucent 9764 and 9772
Metro Cell Outdoor Wi-Fi AP and
Wi-Fi Service Controller, Release
WA5.5, System Reference Guide,
3MN-01840-0002-RKZZA
OnLine Customer Support (OLCS)
(http://support.alcatel-lucent.com)
Instructions for accessing
and using the web-based
graphic user interface
(GUI) to
manage/administer the
9772 Wi-Fi Service
Controller and 9764 MCO
Wi-Fi Access Point
Alcatel-Lucent 9764 and 9772,
Metro Cell Outdoor Wi-Fi AP and
Wi-Fi Service Controller, Release
WA 5.5, CLI Reference Guide,
3MN-01840-0003-RKZZA
OnLine Customer Support (OLCS)
(http://support.alcatel-lucent.com)
Instructions for accessing
and using command line
interface (CLI) to
manage/administer the
9772 Wi-Fi Service
Controller and 9764 MCO
Wi-Fi Access Point.
Library for LTE End-to-End
Solution
LTE End-to-End Solution
(https://infoproducts.alcatel-lucent.com/
aces/cgi-bin/dbaccessproddoc.cgi.edit?
entryId=1-0000000001078)
The full collection of
documents in the LTE
collection
Alcatel-Lucent LTE Radio Access
Network (RAN) eNodeB Macro
and Metro Products Release FDD
Release Notes
LTE End-to-End Solution
(https://infoproducts.alcatel-lucent.com/
aces/cgi-bin/dbaccessproddoc.cgi.edit?
entryId=1-0000000001078)
Release specific software
and feature status
information
Subject to non-disclosure agreement and
available from Alcatel-Lucent
representatives
Product ordering codes
9YZ-05817-0001-FMZZA
(LR13.3.L)
9YZ-04152-0001-FMZZA
(LR14.1.L)
DRAFT
9764 lightRadio Metro Cell
Outdoor “Family” Model Offer
Provisioning Guide,
BCR/IRC/APP/038681
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
xviii
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
....................................................................................................................................................................................................................................
Table 3
Related documents
(continued)
Refer to this document
At this location
For more information
on
FDD eNodeB Product Engineering
Guide, LTE/DCL/APP/041927
Subject to non-disclosure agreement and
available from Alcatel-Lucent
representatives
The different
Alcatel-Lucent LTE
eNodeB hardware
configurations and the
related engineering rules
and guidelines.
Grounding and Lightning
Protection Guidelines for
Alcatel-Lucent Wireless System
Cell Sites, 401-200-115
OnLine Customer Support (OLCS)
(http://support.alcatel-lucent.com)
Grounding and Lightning
protection systems
Standard for Installation of
Lightning Protection Systems,
NFPA
ANSI web site (http://webstore.ansi.org/
default.aspx)
Lightning protection
systems
Recommended Practices on Surge
Voltages in Low Voltage AC Power
Circuits, IEEE C62.41 (Latest
Edition)
IEEE web site (http://www.ieee.org/index.
html)
Power
DRAFT
About this document
Document support
For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at
the following telephone numbers.
From United States
•
If you are using a landline, a cellular phone or VoIP, dial this number: 1-888-582-3688
From other countries
•
If you are using a cellular phone or VoIP, dial this number: +1-630-224-2485
•
If you are using a landline (phone without a plus [+] character), replace the plus sign
with your country's exit code. Dial this number: Exit code for the country of origin:
1-630-224-2485. See the country-specific exit codes listed here.
These numbers apply for document support only. Please see the section “Technical
support” for details about product hardware, software, and technical support.
Technical support
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
xix
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
For technical support, contact your local Alcatel-Lucent customer support team. See the
Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact
information.
DRAFT
About this document
....................................................................................................................................................................................................................................
How to order
To order Alcatel-Lucent documents, contact your local sales representative or use Online
Customer Support (OLCS) (http://support.alcatel-lucent.com).
How to comment
Note to reviewers: The following "How to comment" text will appear in the final
document when it is published. However, the feedback method described below is for use
only on final documents. Please send your review comments to the author using the
process you were given when you received this draft document.
DRAFT
To comment on this document, go to the Online Comment Form (http://infodoc.alcatellucent.com/comments/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
xx
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
Safety statements
Overview
Purpose
This chapter provides general information on the structure of safety instructions and
summarizes general safety requirements.
General safety and residual risk
The equipment has been developed in line with state-of-the-art technology and conforms
with current national and international safety requirements.
The equipment is considered safe during normal operation when safe working practices
are complied with. However, hazards may arise if procedures are not followed correctly
or safe working practices are not complied with.
Contents
Structure of safety statements
1-2
Safety
1-4
Safety - specific hazards
1-5
Product safety
1-9
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
1-1
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Safety statements
Structure of safety statements
....................................................................................................................................................................................................................................
Structure of safety statements
Overview
This topic describes the components of safety statements that appear in this document.
General structure
Safety statements include the following structural elements:
MP
CAUTION
Lifting hazard
SA
Lifting this equipment by yourself can result in injury
due to the size and weight of the equipment.
DRAFT
Always use three people or a lifting device to transport
and position this equipment.
[ABC123]
Item
Structure element
Purpose
Safety alert symbol
Indicates the potential for personal injury
(optional)
Safety symbol
Indicates hazard type (optional)
Signal word
Indicates the severity of the hazard
Hazard type
Describes the source of the risk of damage or
injury
Safety message
Consequences if protective measures fail
Avoidance message
Protective measures to take to avoid the hazard
Identifier
The reference ID of the safety statement
(optional)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
1-2
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Structure of safety statements
....................................................................................................................................................................................................................................
Signal words
The signal words identify the hazard severity levels as follows:
Signal word
Meaning
DANGER
Indicates an extremely hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE
Indicates a hazardous situation not related to personal injury.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
1-3
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Safety statements
DRAFT
Safety statements
Safety
....................................................................................................................................................................................................................................
Safety
General precautions for installation procedures
WARNING
Failure to observe these safety precautions may result in personal
injury or damage to equipment.
•
•
•
Read and understand all instructions.
Follow all warnings and instructions marked on this product.
Installation and maintenance procedures must be followed and performed by
trained personnel only.
•
The equipment must be provided with a readily accessible disconnect device
as part of site preparation.
Grounding and circuit continuity is vital for safe operation of the equipment.
Never operate the equipment with grounding/bonding conductor
disconnected.
Before servicing, disconnect power input to reduce the risk of energy
hazards.
If installed in ambient temperatures above 46°C (115°F), this unit must be
installed only in restricted access locations, where access is limited to
qualified service personnel only.
•
•
DRAFT
•
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
1-4
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Safety - specific hazards
....................................................................................................................................................................................................................................
Safety - specific hazards
DRAFT
Safety statements
Danger
DANGER
Electric-shock hazard
Working in severe weather can result in personal injury or death and damage to the
equipment.
Never install or perform maintenance during severe weather (high winds, lightning,
blizzards, hurricane etc.).
DANGER
Noxious-substance hazard
Use of unspecified cleaning agents can result in personal injury.
Use only specified cleaning agents. Never use flammable solvents.
Always ensure there is adequate ventilation in the work area and wear the appropriate
personal protective equipment.
Warning
WARNING
Laser hazard
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser radiation exposure.
Do not view directly into the laser beam with optical instruments such as a fiber
microscope because viewing of laser emission in excess of Class 1 limits significantly
increases the risk of eye damage.
Never look into the end of an exposed fiber or an open connector as long as the optical
source is switched on.
Ensure that the optical source is switched off before disconnecting optical fiber
connectors.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
1-5
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Safety statements
Safety - specific hazards
....................................................................................................................................................................................................................................
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Caution
CAUTION
RF hazard
RF exposure in excess of applicable limits can result in adverse health effects.
Metro Cells are designed and installed in order to comply with the international exposure
guidelines laid down by the International Commission on Non-Ionizing Radiation
Protection (ICNIRP) and/or the Institute of Electrical & Electronics Engineers
(IEEE) C95.1. ICNIRP guidelines have been implemented by the European Commission
and a number of other countries. IEEE guidelines have been implemented in North
America and some other countries.
Workers that are required to work in close proximity to the equipment, for example
maintenance personnel, should strictly follow instructions provided by their employer.
Workers equipped with personal medical electronic devices, such as pacemakers and
hearing aids, shall consult the manufacturer's instructions and consult their occupational
health practitioner.
CAUTION
Electrical energy hazard
Some parts of all electrical installations are energized. Failure to observe this fact and
the safety warnings may lead to bodily injury and property damage.
DRAFT
For this reason, only trained and qualified personnel (electrical workers as defined in
IEC 60215 + A1 or EN 60215) may install or service the installation.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
1-6
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Safety - specific hazards
....................................................................................................................................................................................................................................
CAUTION
Electrical energy hazard
DRAFT
Safety statements
The power supply lines to the network element are energized. Contact with parts carrying
voltage can cause health problems, possibly including death, even hours after the event.
Open and lockout the load disconnect switch in the distribution box to completely
de-energize the network element.
Notices
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges (ESD)
The following rules must be complied with when handling any module containing
semiconductor components:
•
Wear conductive or antistatic working clothes (for example, coat made of 100%
cotton).
•
•
Wear a grounded wrist strap.
Wear shoes with conductive soles on a conductive floor surface or conductive work
mat.
Leave the modules in their original packaging until ready for use.
•
•
•
•
Make sure there is no difference in potential between yourself, the workplace, and the
packaging before removing, unpacking, or packing a module.
Whenever handling ESD-sensitive components, do not touch any connection pins or
tracks.
Place modules removed from the equipment on a conductive surface.
Test or handle the module only with grounded tools on grounded equipment.
•
Handle defective modules exactly like new ones to avoid causing further damage.
•
NOTICE
Condensation
Sudden changes in the weather may lead to the formation of condensation on
components. Operating the unit when condensation moisture is present can destroy the
unit.
Units which show signs of condensation must be dried before installation.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
1-7
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Safety statements
Safety - specific hazards
....................................................................................................................................................................................................................................
NOTICE
Tools
Tools left in the working area can cause short circuits during operation which can lead to
the destruction of units.
DRAFT
Make sure after finishing your work that no tools, testing equipment, flashlights, etc.,
have been left in or on the equipment.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
1-8
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Product safety
....................................................................................................................................................................................................................................
Product safety
DRAFT
Safety statements
Equipment safety
Safety information for this equipment can be found on various Caution, Warning, Danger,
information labels or instructions affixed to or included with the product or included
within this document. Informational and cautionary labels may appear near the item they
address or may be grouped in a single location on the equipment. Warnings are typically
adjacent to the hazard that is noted on the label. The instructions, cautions and warnings
found on these labels must be understood and observed by all personnel involved with the
equipment installation and maintenance.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
1-9
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
DRAFT
Safety statements
Product safety
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
1-10
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
Product overview
Overview
Purpose
This chapter provides an overview of Alcatel-Lucent 9764 Metro Cell Outdoor LTE
2x1W and Alcatel-Lucent 9764 Metro Cell Outdoor LTE 2x2W products.
Contents
Functional description
2-2
Physical description
2-4
Supported installation options
2-13
Hardware and ancillary items
2-17
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-1
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product overview
Functional description
....................................................................................................................................................................................................................................
Functional description
General description
Alcatel-Lucent Metro Cells enable mobile service providers (MSPs) to deliver
cost-effective capacity to urban spots, as well as affordable coverage to rural locations.
They also enhance the quality of experience (QoE) for end users by enabling faster, more
reliable data connections and higher data throughput on 4G networks.
The 9764 MCO LTE 2x1W and 9764 MCO LTE 2x2W products specified here are
targeted for high user density locations where additional capacity is required or even in
areas where cell phone coverage is needed on short notice. The product can be deployed
by mobile operators to provide a transparent outdoor capacity layer to complement the
macro cell “umbrella” coverage layer.
Product features and capabilities
The product features and capabilities in this release are:
•
•
Supports LTE FDD
Single LTE carrier
•
•
•
•
Supports either B25 band, B2 band, B3 band or B7 band
PCS 1900 MHz frequency band (B25 and B2)
DCS 1800 MHz frequency band (B3)
2600 MHz frequency band (B7)
•
9764 MCO LTE 2x1W supports the following RF antenna capabilities:
– Transmit power: 1W at each internal RF antenna connector, and a guaranteed
Equivalent Isotropically Radiated Power (EIRP) of 37 dBm per path for the B2
MCO, B2/B25 (combined) MCO, B3 MCO, and B25 MCO, and 40 dBm per path
for the B7 MCO. Transmit power can be reduced by a maximum of 14 dB to
adjust the static cell power.
– Integrated directional “Cube-based” antennas
DRAFT
•
– Standard 2x2 MIMO configurations, 2 transmit and 2 receive diversity
The 9764 MCO LTE 2x2W supports the following RF antenna capabilities:
– Supports two external antenna connectors (QN-type) allowing an internal RF
antenna configuration or an external RF antenna configuration. The operator must
obtain the external RF antennas from third party vendors.
•
– Transmit power of 2W at each external connector.
Receiver sensitivity optimized to permit near far simultaneous operation (reference
sensitivity:-98 dBm)
•
Supports Plug and Play to automatically connect to the network.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-2
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Functional description
....................................................................................................................................................................................................................................
•
•
The 9764 Metro Dock supports Gigabit Ethernet backhaul (support for other backhaul
variations are planned for the future).
Supports optional modular and field replaceable Wi-Fi Access Points.
DRAFT
Product overview
Refer to Alcatel-Lucent Small Cell Wi-Fi AP Technical Description,
3MN-01840-0004-DEZZA for Wi-Fi AP product details.
•
•
The 9764 MCO LTE products have feature parity with some but not all macro
eNodeB features. See the release-specific version of the Alcatel-Lucent LTE eNodeB
Macro and Metro Products FDD Release Notes for more information. Refer to the
“Related Information” block in “About this document” for the applicable document
versions.
Supported user capacity - refer to the table below.
The number of active users and the number of Voice over LTE (VoLTE) calls supported is
shown in the table below for the 9764 MCO LTE 2x1W and 9764 MCO LTE 2x2W
models.
9764 MCO LTE
2x1W model
Supported
Bandwidth
# active users supported
# VoLTE calls
supported
B25
5 MHz
up to 64 active users with up
to eight bearers per UE
up to 32 VoLTE calls
B2/B25 (combined)
10 MHz
up to 64 active users with up
to eight bearers per UE
up to 64 VoLTE calls
B2 (see note 2)
5 MHz
up to 64 active users with up
to eight bearers per UE
up to 64 VoLTE calls
B3
10 MHz
up to 64 active users with up
to eight bearers per UE
up to 32 VoLTE calls
B7
10 MHz
up to 64 active users with up
to eight bearers per UE
up to 32 VoLTE calls
B7
20 MHz
up to 16 active users with up
to eight bearers per UE
up to 32 VoLTE calls
Notes:
1.
The 9764 MCO LTE 2x1W and the 9764 MCO LTE 2x2W are hardware ready for 200
simultaneous active users.
2.
The B2 capacity figures above apply to both the 9764 MCO V1.1 B2 LTE 2x1W and the
9764 MCO V1.1 B2 LTE 2x2W models.
3.
In this release, the number of active users is the same as the number of RRC connected
users.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-3
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product overview
Physical description
....................................................................................................................................................................................................................................
Physical description
Product overview
The Alcatel-Lucent 9764 Metro Cell Outdoor LTE 2x1W and Alcatel-Lucent 9764 Metro
Cell Outdoor LTE 2x2W are housed in an Alcatel-Lucent generic metallic case. The
products are designed to be deployed close to the users, usually in streets, on light poles
or on walls of buildings, with a vertical profile that hides cable connectors and mounting
kit for a smooth integration into the surrounding environment.
The Alcatel-Lucent 9764 Metro Cell Outdoor LTE 2x1W and Alcatel-Lucent 9764 MCO
LTE 2x2W products are shown in the following figure.
Figure 2-1 9764 Metro Dock and 9764 MCO LTE 2x1W and Alcatel-Lucent 9764
Metro Cell Outdoor LTE 2x2W
Top view
9764 Metro Dock
DRAFT
9764 Metro Dock
9764 MCO LTE 2x1W module
and
9764 MCO LTE 2x2W module
(reverse view)
Bottom view
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-4
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Physical description
....................................................................................................................................................................................................................................
Figure 2-2 9764 MCO LTE with 9764 MCO Wi-Fi AP
DRAFT
Product overview
Wi-Fi
AP
9764 Wi-Fi AP
9764 MCO front view
with 9764 Wi-Fi AP
9764 MCO rear view
with 9764 Wi-Fi AP
In order to simplify configurations the backhaul access function and the radio part
functions are separated, with a common interface as defined:
Unit
Function
Description
9764 Metro Dock
module
Backhaul access function
Supports backhaul options
9764 MCO LTE
module
Radio and baseband
function
Holds the 9764 MCO LTE module in place
Radio functions
Digital processing functions
Power supply functions
9764 MCO Wi-Fi
AP module
Wi-Fi function
Wi-Fi network access function.
Refer to Alcatel-Lucent Small Cell Wi-Fi AP
Technical Description, 3MN-01840-0004DEZZA for Wi-Fi AP product details.
Weights and dimensions
The physical dimensions of the Alcatel-Lucent 9764 Metro Cell Outdoor are:
Dimensions (9764 MCO LTE module
+ 9764 Metro Dock) (Length x Width
x Depth)
501 x 170 x 164 mm (19.7 x 7.0 x 6.5 in)
Dimensions (9764 MCO module +
9764 Metro Dock + 9764 MCO
Wi-Fi AP) (Length x Width x Depth)
With 9764 MCO Wi-Fi AP V1.0 MG: 550 x 170 x 150
mm (21.7 x 6.7 x 5.9 in)
With 9764 MCO Wi-Fi AP V1.0 HG: 590 x 170 x 150
mm (23.2 x 6.7 x 5.9 in)
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-5
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product overview
Physical description
....................................................................................................................................................................................................................................
Volume (9764 MCO LTE module +
9764 Metro Dock)
12.7 L (3.35 gal)
Weight (9764 MCO LTE module +
9764 Metro Dock)
10.1 kg (22.2 lb)
Weight (9764 MCO LTE module +
9764 Metro Dock + 9764 MCO
Wi-Fi AP)
With 9764 MCO Wi-Fi AP V1.0 MG: 10.57 kg (23.30
lb)
Weight (9764 MCO LTE module
only)
9.1 kg (20.1 lb)
With 9764 MCO Wi-Fi AP V1.0 HG: 10.77 kg (23.74
lb)
Dimensions for optional pair-mount configuration
The physical dimensions when two 9764 MCOs are pair-mounted are as follows:
Configuration
Height
Width
Depth
4G MCO + 3G MCO
With Wi-Fi AP, Minimal
distance between MCOs,
With full tilt mechanics
590 mm
410 mm including
back-bracket
290 mm
4G MCO + 3G MCO NO
Wi-Fi AP, Minimal
distance between MCOs,
NO tilt mechanics
501 mm
(338 mm without
back-bracket)
410 mm including
back-bracket
210 mm
(338 mm without
back-bracket)
Alcatel-Lucent 9764 Metro Cell Outdoor LTE overview
DRAFT
The 9764 MCO LTE module is made up of three main units which are responsible for
radio, digital processing and power supply functions.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-6
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Physical description
....................................................................................................................................................................................................................................
Unit
Function
9764 MCO LTE module
Digital part:
•
Gigabit Ethernet switch
•
Processors to provide modem and controller functionality
•
9764 Metro Dock interface (data, control and power supply)
•
9764 MCO Wi-Fi AP interface
DRAFT
Product overview
Radio part
•
Radio part B25:
– LTE Band 25 (1850 MHz - 1915 MHz (UL), 1930 MHz - 1995
MHz (DL))
– Two TX antenna connectors and two RX antenna connectors
•
Radio part 9764 MCO V1.1 B2 LTE 2x1W:
– LTE Band 2 (1850 MHz - 1910 MHz (UL), 1930 MHz - 1990
MHz (DL))
– Two TX antenna connectors and two RX antenna connectors
•
Radio part 9764 MCO V1.1 B2 LTE 2x2W:
– LTE Band 2 (1850 MHz - 1910 MHz (UL), 1930 MHz - 1990
MHz (DL))
– Two external RF antenna connectors (Type QN)
•
Radio part B2/B25 (combined):
– LTE Band 25 (1850 MHz - 1915 MHz (UL), 1930 MHz - 1995
MHz (DL))
– Two TX antenna connectors and two RX antenna connectors
•
Radio part B3:
– LTE Band 3 (1710 MHz - 1785 MHz (UL), 1805 MHz - 1880
MHz (DL))
– Two TX antenna connectors and two RX antenna connectors
•
Radio part B7:
– LTE Band 7 (2500 MHz - 2570 MHz (UL), 2620 MHz - 2690
MHz (DL))
– Two TX antenna connectors and two RX antenna connectors
9764 MCO LTE 2x1W models: Internal GPS antenna connector
(depending on the model) or an external GPS connector for localization
synchronization (only one can be used)
9764 MCO LTE 2x2W models: A GPS connector that is switchable
between internal GPS antenna and external GPS antenna.
Power supply part - please see “Power supply” (p. 2-10) for internal
power module unit information.
9764 MCO LTE 2x1W Antennas
Integrated cube-based RF antennas configured for 2x2 MIMO.
•
internal GPS antenna configuration (depending on the model) or
external GPS antenna configuration.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-7
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
•
DRAFT
Product overview
Physical description
....................................................................................................................................................................................................................................
Unit
Function
9764 MCO LTE 2x2W Antennas
•
Integrated 1-element RF antenna or cabling to external remote RF
antennas.
•
Internal GPS antenna configuration or external GPS antenna
configuration.
•
AC power supply or DC power supply (see “Power supply”
(p. 2-10) for further information)
Power source
9764 MCO LTE module connection interfaces
The following figure shows the connection interfaces for the 9764 MCO LTE module.
Figure 2-3 9764 MCO LTE module connection interfaces (1 of 2)
GPS connector
(for optional external
GPS antenna)
Blind mate connector
between Metro Cell Module
and the Metro Dock
Wi-Fi AP connector
(for optional Wi-Fi AP)
Cable gland
9764 Metro Dock
module
Power connector
DRAFT
9764 MCO LTE
2x1W module
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-8
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Physical description
....................................................................................................................................................................................................................................
Figure 2-3 9764 MCO LTE module connection interfaces (2 of 2)
DRAFT
Product overview
External antenna connectors
(with antennas attached)
Blind mate connector
between Metro Cell Module
and the Metro Dock
Cable gland
External GPS
antenna connector
Power connector
9764 Metro Dock
module
WIFI AP connector
(optional)
9764 MCO B2 2x2W
LTE module
Figure 2-4 9764 MCO LTE module connection interfaces - double lug ground point
detail
Double lug
ground point
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-9
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product overview
Physical description
....................................................................................................................................................................................................................................
Connection location
Description
9764 MCO LTE module (back)
A power supply connector
A blind mate connector for connecting the 9764 MCO LTE
module and the 9764 Metro Dock
9764 MCO Wi-Fi AP (optional) connector
External GPS antenna connector
Internal GPS antenna connector (only 2x1W models
supporting an internal GPS configuration)
Power supply
The 9764 MCO LTE module supports the following power source variants:
•
•
AC power feed in the 100 V – 240 V AC range, ~2.0 A 50-60 Hz, with nominal
voltages of 110 V and 230 V.
The AC power is surge-protected as follows:
– First level (no damage to equipment, no service interruption): 2 KV/1 KA
DC power feed of -48 V, 3.5 A SELV Source.
Surge requirements satisfy GR-1089-CORE and IEC 61000-4-5, providing 6 KV (3KA)
surge protection.
Grounding connection points, located below the power connector on the chassis, provide
grounding for the power module.
A power module unit inside the 9764 MCO LTE 2x1W and Alcatel-Lucent 9764 MCO
LTE 2x2W provides AC/DC conversion (5.3 V output) to its power board, which then
provides secondary DC-DC conversion and distributes 5.3 V to the 9764 Metro Dock
module and the 9764 MCO Wi-Fi AP module (if equipped).
The power module supports an average consumption of 100 W, as well as the peak 130 W
consumption projected for the 9764 MCO LTE 2x1W and 9764 MCO LTE 2x2W (9764
MCO LTE module, 9764 Metro Dock module, and optional 9764 MCO Wi-Fi AP
module). Without the optional 9764 MCO Wi-Fi AP module, average consumption is
approximately 92 W (peak 120 W).
RF antenna
DRAFT
The 9764 MCO LTE 2x1W support an integrated RF antenna configured for 2x2 MIMO.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-10
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Physical description
....................................................................................................................................................................................................................................
The 9764 MCO V1.1 B2 LTE 2x2W supports two external antenna connectors (Type QN)
allowing the following RF antenna configurations:
•
•
DRAFT
Product overview
Internal 1-element RF antenna
Cabling to external remote RF antennas. The external antennas are provided by
third-party vendors selected by the operator.
GPS antenna
The 9764 MCO LTE 2x1W supports the following GPS antenna configurations:
•
•
•
internal GPS antenna mounted behind the radome to provide localization
synchronization of the unit, or
an external GPS antenna connector (QMA) on the 9764 MCO LTE module, which
can be used to connect to an external GPS antenna
The 9764 MCO LTE 2x1W will be installed to use either the internal GPS antenna (if
available for that model) or it will be connected to an external GPS antenna. When
configured to use the internal GPS antenna, a bridge cable is used to connect the
external GPS QMA connector to the internal GPS QMA connector.
A QMA GPS Antenna switch is available on the 9764 MCO V1.1 B2 LTE 2x2W model,
which allows it to support both internal GPS antenna and external GPS antenna solutions
without the use of a bridge cable. When no external GPS cable is attached to the QMA
connector, the internal GPS antenna is engaged and active. When an external GPS
antenna cable is attached to the QMA connector, a switch in the connector automatically
sets the 9764 MCO V1.1 B2 LTE 2x2W up for the external GPS antenna configuration.
When the external GPS antenna cable is removed, the switch in the QMA connector
moves the 9764 MCO V1.1 B2 LTE 2x2W back to an internal GPS antenna
configuration.
Table 2-1
GPS antenna options
Metro Cell model
Internal GPS antenna
External GPS antenna
9764 MCO V1.0 B25 LTE 2x1W
9764 MCO V1.1 B2 LTE 2x1W
9764 MCO V1.1 B3 LTE 2x1W
9764 MCO V1.1 B7 LTE 2x1W
9764 MCO V1.1 B2/B25 LTE
2x1W
9764 MCO V1.1 B2 LTE 2x2W
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-11
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product overview
Physical description
....................................................................................................................................................................................................................................
Status indicator
The 9764 MCO LTE supports a single bi-color LED (red/green) which is located on the
rear lower portion of the 9764 MCO LTE module. The LED is not intended for use during
normal operation of the equipment; however, it can provide a visual status of the
equipment during initial installation and commissioning.
Product labelling
The 9764 MCO LTE module has the following labelling:
1. A product label reflecting:
• Vendor name/Icon
• Model name
• Part number
•
•
•
•
Serial number
Data matrix barcode for Part number and Serial number
CLEI code
MAC address
2. A regulatory label reflecting:
• Vendor name/Icon
• Product name
•
•
•
•
Regulatory rules
Power input
Enclosure rating
Applicable regulatory and environmental certification logos
DRAFT
• Manufacturer name
3. An FCC label reflecting (for B2, B25 and B2/B25 (combined) MCOs only):
• Vendor name/Icon
• FCC ID
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-12
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Supported installation options
....................................................................................................................................................................................................................................
Supported installation options
DRAFT
Product overview
Overview
The following section describes the supported installation options for the Alcatel-Lucent
9764 Metro Cell Outdoor LTE 2x1W and Alcatel-Lucent 9764 Metro Cell Outdoor V1.1
B2 LTE 2x2W products. These include:
•
Standard installation options for all 9764 MCO LTE 2x1W products.
•
•
Standard installation options for all 9764 MCO LTE 2x2W products.
Daisy chain installation options where two 9764 MCO modules are daisy chained
together and share the same backhaul port.
Pair-mount installation options where:
•
–
–
–
–
a 9764 MCO V1.1 B2 LTE 2x1W product is mounted with a 9764 MCO V1.0 B2
WCDMA 1W, or
a 9764 MCO V1.1 B2 LTE 2x2W product is mounted with a 9764 MCO V1.0 B2
WCDMA 1W, or
a 9764 MCO V1.1 B7 LTE 2x1W product is mounted with a 9764 MCO V1.0 B1
WCDMA 1W.
a 9764 MCO V1.1 B2/B25 LTE 2x1W product is mounted with a 9764 MCO
V1.0 B1 WCDMA 1W.
Standard installation options
Alcatel-Lucent 9764 MCO LTE 2x1W and Alcatel-Lucent 9764 MCO LTE 2x2W
products are designed to be deployed outdoors and close to the users, usually on light
poles or lamp posts in streets or on building walls, with a vertical profile. Optional tilt
mounting brackets can be used that allow the 9764 MCO module to be adjusted in
vertical and/or horizontal direction at same time.
Figure 2-5 Installation examples
Pole mount installation
Wall mount installation
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-13
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product overview
Supported installation options
....................................................................................................................................................................................................................................
In addition, Alcatel-Lucent 9764 MCO LTE 2x1W and Alcatel-Lucent 9764 MCO LTE
2x2W products can be fitted with an optional 9764 MCO Wi-Fi AP module as shown in
the following figure.
Figure 2-6 9764 MCO Wi-Fi AP module attached to 9764 MCO LTE module (front
view)
Wi-Fi AP
Ethernet daisy chain installation options
DRAFT
In a daisy chain installation configuration two Alcatel-Lucent 9764 MCOs can be daisy
chained together, where they share the same backhaul port, thus reducing the investment
cost needed to connect the 9764 MCOs to the backhaul network and aggregating the
uplink and downlink traffic. Daisy chained 9764 MCOs may be co-located or separated
by some distance.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-14
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Supported installation options
....................................................................................................................................................................................................................................
Figure 2-7 9764 MCO daisy chain installation example
DRAFT
Product overview
Backhaul
Daisy chain configuration options are described in, “Pair mount and daisy chain
requirements” (p. 3-13)
Pair-mount installation options
In a “pair-mount” installation configuration a 9764 MCO LTE 2x1W product or a 9764
MCO LTE 2x2W product can be mounted with a 9764 MCO WCDMA product to form a
Multi-Standard Pair configuration. The supported pair-mount configurations are as
follows:
•
•
•
•
A 9764 MCO V1.1 B2 LTE 2x1W in a pair-mount configuration with a 9764 MCO
V1.0 B2 WCDMA 1W.
A 9764 MCO V1.1 B2/B25 LTE 2x1W in a pair-mount configuration with a 9764
MCO V1.0 B2 WCDMA 1W.
A 9764 MCO V1.1 B2 LTE 2x2W in a pair-mount configuration with a 9764 MCO
V1.0 B2 WCDMA 1W,
A 9764 MCO V1.1 B7 LTE 2x1W in a pair-mount configuration with a 9764 MCO
V1.0 B1 WCDMA 1W.
Note: This 9764 MCO V1.1 B7 LTE 2x1W/9764 MCO V1.0 B1 WCDMA 1W
pair-mount configuration applies to AC variants only.
Service providers can deploy these configurations on the same site to meet the growing
demands of capacity on the 3G and 4G technologies.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-15
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product overview
Supported installation options
....................................................................................................................................................................................................................................
Figure 2-8 9764 MCO pair-mount installation example
DRAFT
pair-mount configuration options are described in, “Pair mount and daisy chain
requirements” (p. 3-13)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-16
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Hardware and ancillary items
....................................................................................................................................................................................................................................
Hardware and ancillary items
DRAFT
Product overview
Overview
The following section lists the Alcatel-Lucent 9764 Metro Cell Outdoor base hardware
equipment, the installation kits and ancillary items that can be ordered from
Alcatel-Lucent.
9764 MCO base items
The Alcatel-Lucent 9764 MCO LTE 2x1W or the Alcatel-Lucent 9764 MCO LTE 2x2W
packaging contains the following base items:
•
•
9764 MCO LTE 2x1W module or
9764 MCO LTE 2x2W module
9764 Metro Dock base items
The Alcatel-Lucent 9764 Metro Dock packaging contains the following base items:
•
Alcatel-Lucent 9764 Metro Dock (including lock and key)
9764 MCO Wi-Fi AP base items
The Alcatel-Lucent 9764 Metro Cell Outdoor Wi-Fi AP is an optional product. Two
models are available:
•
•
9764 MCO Wi-Fi AP v1.0 MG model (medium-gain antenna)
9764 MCO Wi-Fi AP v1.0 HG model (high-gain antenna)
Ancillary items
The following tables list the ancillary items that are available for order from
Alcatel-Lucent in support of the defined equipment installation and configuration options.
Installation kits
The following table list the installation kits that are available for order from
Alcatel-Lucent in support of the equipment installation options.
Installation kit
Description
Use
Banding kit
Stainless steel bands
Mandatory:
Band buckles (Ear-Lokt)
•
Banding tool
Wall spacer kit
®
Standard BAND-IT Banding Tool
(CR00169), including operating
instructions
9764 Metro Dock wall spacer
pole mount only
Mandatory:
•
use with the Banding kit for pole
mount only
Mandatory:
wall mount without tilt
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-17
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
•
DRAFT
Product overview
Hardware and ancillary items
....................................................................................................................................................................................................................................
Installation kit
Description
Use
Vertical tilt installation kit
Vertical tilt bracket
Mandatory:
Horizontal tilt installation kit
Horizontal tilt bracket
•
pole mount with tilt
•
wall mount: with vertical only
•
wall mount: with vertical and
horizontal tilt
Mandatory:
•
wall mount: with horizontal tilt only
•
wall mount: with horizontal and
vertical tilt
Power
Item
Description
Use
Power connector (AC)
AC power connector
Required for 9764 MCO module with AC
power (International markets)
Power connector (DC)
DC power connector
Required for 9764 MCO module with DC
power (International markets)
Power cable
Power cable IN/OUT 3G1,5mm²,
100m roll or multiples of 1m length
(as needed)
Required for 9764 MCO module
(International markets)
Power cable (AC)
Power cable pre-assembled with AC
power connector, various lengths
(2m. 4.5m, 9m, 12m)
Required for 9764 MCO module with AC
power (North America Regional markets)
Power cable (DC)
Power cable pre-assembled with DC
power connector, various lengths
(2m. 4.5m, 9m, 12m)
Required for 9764 MCO module with DC
power (North America Regional markets)
Item
Description
Use
Ground cable
Ground cable,Y/G 10mm² in 100m
roll
Required for International markets
Ground cable
Ground cable, 8 AWG
Required for North America Regional
markets
Grounding
SFP modules
Item
Description
Use
SFP module
SFP GBE 10/100/1000BaseT (copper)
Optional
Electrical backhaul only
DRAFT
SFP module
SFP GBE 1000BaseLX (Single mode)
Optional
Optical backhaul, Daisy chaining
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-18
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Hardware and ancillary items
....................................................................................................................................................................................................................................
Item
Description
Use
SFP module
SFP GBE 1000BaseLX / CPRI (Single mode)
Optional
DRAFT
Product overview
Optical backhaul, Daisy chaining,
Pair-mount configuration
SFP module
SFP GBE 1000BaseSX / CPRI (Multi mode)
Optional
Optical backhaul, Daisy chaining,
Pair-mount configuration
Surge arrestor
Item
Description
Use
Internal surge arrestor1
9764 Metro Dock internal Ethernet
surge arrestor kit
Optional
External Ethernet surge arrestor kit,
including:
Optional
External surge arrestor
•
mounting bracket
•
pole bands and buckle
•
Ethernet cable, 0.6 m (2 ft)
Highly recommended if GBE 1000BaseT
backhaul connection is provided
Highly recommended if GBE 1000BaseT
backhaul connection is provided
Notes:
1.
The 9764 Metro Dock internal Ethernet surge arrestor is available within Release LR14.1.L.
Ethernet cable - Electrical
Item
Description
Use
Electrical Ethernet cable
2 meter outdoor, 4 pairs, 2 RJ45 (plus
1 spare)
Optional
25 meter outdoor, 4 pairs, 2 RJ45
(plus 1 spare)
Optional
100 meter outdoor, 4 pairs, 2 RJ45
(plus 1 spare)
Optional
Electrical Ethernet cable
Electrical Ethernet cable
Use with SFP GBE 10/100/1000BaseT
Use with SFP GBE 10/100/1000BaseT
Use with SFP GBE 10/100/1000BaseT
Ethernet cable - Optical
Item
Description
Use
Fiber Optic cable
SMDF LC-LC 2SM 5m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
SMDF LC-LC 2SM 15m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
Fiber Optic cable
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-19
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product overview
Hardware and ancillary items
....................................................................................................................................................................................................................................
Item
Description
Use
Fiber Optic cable
SMDF LC-LC 2SM 30m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
DRAFT
Fiber Optic cable
SMDF LC-LC 2SM 50m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
SMDF LC-LC 2SM 70m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
SMDF LC-LC 2SM 85m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
SMDF LC-LC 2SM 100m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
SMDF LC-LC 2SM 150m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
SMDF LC-LC 2SM 200m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
SMDF LC-LC 2SM 250m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
SMDF LC-LC 2SM 300m
Optional
Single mode fiber duplex 250 mm
Breakout on both sides
Use with SFP GBE 1000BaseLX (Single
mode)
MM LC-LC 2MM 5m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
MM LC-LC 2MM 15m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
MM LC-LC 2MM 30m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
MM LC-LC 2MM 50m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
MM LC-LC 2MM 70m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-20
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Hardware and ancillary items
....................................................................................................................................................................................................................................
Item
Description
Use
Fiber Optic cable
MM LC-LC 2MM 85m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
Fiber Optic cable
Fiber Optic cable
MM LC-LC 2MM 100m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
MM LC-LC 2MM 150m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
MM LC-LC 2MM 200m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
MM LC-LC 2MM 250m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
MM LC-LC 2MM 300m
Optional
Multi mode fiber duplex, 250 mm
Breakout on both sides
SFP GBE 1000BaseSX (Multi mode)
Item
Description
Use
GPS antenna
External GPS Antenna, 1575
MHz*26 dBi
Used if MCO is configured for external
GPS antenna and cable loss <10dBi @
1575MHz
GPS antenna
External GPS Antenna, 1575
MHz*40 dBi
Used if MCO is configured for external
GPS antenna and cable loss >10dBi @
1575MHz
Jumper cable
External GPS Antenna jumper cable
(various lengths)
Mandatory
Fiber Optic cable
Fiber Optic cable
Fiber Optic cable
DRAFT
Product overview
External antenna - GPS
Adapter cable
Weatherproof tape
1 cable per MCO if external GPS antenna
is used
External GPS Antenna adaptor cable
Mandatory
from the ancillary
1 cable per MCO if external GPS antenna
is used
For B25 MCO, B2 MCO and B2/B25
MCO - one layer of weatherproof
tape applied to the cable connections.
Mandatory
For B3 MCO and B7 MCO, the
following two types of weatherproof
tape must be applied to the cable
connections: first the linerless rubber
splicing tape and then the vinyl
electrical tape (vinyl tape over rubber
tape).
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
2-21
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product overview
Hardware and ancillary items
....................................................................................................................................................................................................................................
Note: The internal GPS antenna solution is not supported on the 9764 MCO V1.1 B7
LTE 2x1W, 9764 MCO V1.1 B2 LTE 2x1W and 9764 MCO V1.0 B25 LTE 2x1W
models.
External RF antennas
The 9764 MCO V1.1 B2 LTE 2x2W module has two external RF antenna ports for the
connection to third party supplied antennas.
For the RF antenna specifications refer to the RF antenna part of the System architecture
section of the 9YZ-04152-0056-DEZZA - Alcatel-Lucent 9764 Metro Cell Outdoor LTE
2x1W and 2x2W Technical Description document.
DRAFT
Pair-mount configuration
Item
Description
Use
9764 Metro Dock double
support plate
Support plate for mounting 9764
MCO in a pair-mount configuration
Use in a 9764 MCO pair-mount
configuration
Extension plate
Alignment Plate for 3G 9764 MCO in
a pair-mount configuration
Use in a 9764 MCO pair-mount
configuration
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
2-22
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
I3nstallation of the 9764
Metro Dock
Overview
Purpose
This chapter provides the information and procedures for mounting the 9764 Metro Dock
onto a pole or wall, with or without the optional tilt mechanism.
Contents
9764 Metro Dock pre-installation
3-2
9764 Metro Dock Pre-installation information
3-3
Pole mount installation requirements
3-5
Wall mount installation requirements
3-9
Pair mount and daisy chain requirements
3-13
9764 Metro Dock installation
3-18
Procedure 3-1: Pole mount the 9764 Metro Dock
3-19
Procedure 3-2: Pole mount the 9764 Metro Dock using optional tilt brackets
3-25
Procedure 3-3: Wall mount the 9764 Metro Dock
3-35
Procedure 3-4: Wall mount the 9764 Metro Dock using optional tilt brackets
3-40
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair configuration
3-54
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair configuration
3-71
9764 Metro Dock cabling
3-89
Procedure 3-7: 9764 Metro Dock ground cabling
3-90
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber optic
3-92
Procedure 3-9: 9764 Metro Dock Ethernet cabling - electrical
3-99
9764 Metro Dock post-installation
3-112
...................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-1
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Procedure 3-10: Final installation activities and checks
3-111
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Overview
....................................................................................................................................................................................................................................
9764 Metro Dock pre-installation
Overview
Purpose
This section provides pre-installation information as well as listing tools and materials
required for Alcatel-Lucent 9764 Metro Dock mounting.
Contents
9764 Metro Dock Pre-installation information
3-3
Pole mount installation requirements
3-5
Wall mount installation requirements
3-9
DRAFT
Pair mount and daisy chain requirements
3-13
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-2
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
9764 Metro Dock Pre-installation information
....................................................................................................................................................................................................................................
9764 Metro Dock Pre-installation information
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Verify site preparation
The following site preparation requirements should be checked and met before the
installation of the equipment can begin. If some of the requirements are not met, the
installer must do so now:
•
Ensure equipment is planned to be installed as high as possible to avoid obstructions
•
Consider nearby sources of interference. Also check possibility of future obstructions
such as plans to erect buildings and trees that may grow tall enough to obstruct the
wireless path
Ensure adequate clearance is provided for service access
Ground, power and backhaul cabling has been routed and is in place
•
•
•
Ensure any site specific fixing materials (screws, washers, wall plugs) for pole/wall
mounting the equipment are available.
Product delivery contents
Unpack and examine the product packaging contents. If you notice any damage, or
missing items as listed in the Packing List, immediately notify the carrier that delivered
the unit and contact your Alcatel-Lucent representative.
The Alcatel-Lucent 9764 Metro Dock product packaging contains the following items:
•
The 9764 Metro Dock module (including lock and key)
Installation kits
In addition to the standard product deliverable ensure the appropriate installation kits and
ancillary items are available to support the product mounting options.
Installation Kits
Pole mount
No tilt
With tilt
Banding kit
Yes
Yes
Banding tool
Yes
Yes
Vertical tilt kit
Wall mount
No tilt
Yes
Vertical tilt
only
Yes
Horizontal tilt kit
Wall spacer kit
Basic kit
Horizontal
tilt only
Combined
horiz./vert. tilt
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-3
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
9764 Metro Dock Pre-installation information
....................................................................................................................................................................................................................................
Tools required for installation
The following tools may be used during installation:
•
•
•
•
•
Drill (pneumatic hammer) and assorted drill bits
Pliers
Adjustable spanners
M17 socket wrench
Screwdrivers (power and/or manual):
•
– Phillips (flat blade)
– Torx (T-25 and T-40)
HRS (Hirose) HT206/TM21p-88p crimping tool (for RJ45 cable)
•
•
•
Data cable tester for shielded RJ45 (optional)
Measuring tape
Digital compass (to aid establishing product orientation)
•
•
•
•
Marker, to mark wall mounting holes
Vacuum cleaner or equivalent (required for clearing debris from wall mounting holes)
Spirit level
Hammer
•
•
•
•
PIB (self-amalgamating) tape and 3M Super 33+ vinyl tape
Ear protectors and safety goggles/glasses
Assorted cable ties (various lengths)
Heavy duty tape
•
Adjustable straps
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-4
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Pole mount installation requirements
....................................................................................................................................................................................................................................
Pole mount installation requirements
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Purpose
This topic outlines the basic requirements, installation kits and recommended anchor
materials when mounting the Alcatel-Lucent 9764 Metro Dock directly onto a pole, onto
tilt brackets or onto a pair-mount bracket.
Pole mount options
The 9764 Metro Dock is less than 1 kg (2.2 lbs) and can be easily mounted onto a pole
(wooden or metal) for the following installation options:
•
9764 Metro Dock screwed onto a wooden pole (without the tilt option).
Mounting screws and washers have to be locally supplied. Two M8x50 stainless steel
hex head screws and two M8x16x1.6 plain washers are recommended.
•
9764 Metro Dock banded onto a wooden or metal pole (without the tilt option)
The pole band installation kit is used.
•
9764 Metro Dock attached to the vertical tilt bracket. Vertical tilt bracket is either
screwed or banded onto a wooden or metal pole.
•
9764 Metro Dock pair (with or without tilt brackets) attached to a double Metro Dock
support plate. Double Metro Dock support plate is banded onto a wooden or metal
pole.
This deployment option is used when a 9764 MCO V1.1 LTE 2x1W or a 9764 MCO
LTE 2x2W product is mounted with a 9764 MCO WCDMA 1W product to form a
Multi-Standard Pair configuration.
The available pair-mount installation options are:
–
–
–
–
a 9764 MCO V1.1 B2 LTE 2x1W product mounted with a 9764 MCO V1.0 B2
WCDMA 1W product
a 9764 MCO V1.1 B2/B25 LTE 2x1W product with a 9764 MCO V1.0 B2
WCDMA 1W product
a 9764 MCO V1.1 B7 LTE 2x1W product mounted with a 9764 MCO V1.0 B1
WCDMA 1W product
a 9764 MCO V1.1 B2 LTE 2x2W product mounted with a 9764 MCO V1.0 B1
WCDMA 1W product.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-5
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Pole mount installation requirements
....................................................................................................................................................................................................................................
Pole mount installation kits and brackets
The following table provides the orderable installation kits and brackets that can be used,
depending on the deployment scenario, for 9764 Metro Dock pole mounting.
Table 3-1
Pole mount installation kits and brackets
Item
Description
Banding kit
Required when directly attaching the 9764 Metro Dock or vertical tilt
bracket to a pole (diameter 50 to 300 mm) using stainless steel bands.
Stainless steel bands and buckles (Ear-Lokt)
Banding tool
Standard BAND-IT® Banding Tool (CR00169), including operating
instructions
Required in order to tighten stainless steel metal bands
Vertical tilt bracket
Provides +/- 30° vertical tilt (up/down) adjustment1
Double 9764 MCO support plate
Double 9764 MCO support plate for pair-mount deployment option
Double 9764 MCO extension plate
Extension plate for 3G 9764 MCO and 4G 9764 MCO alignment in a
pair-mount deployment option
Notes:
1.
Due to the length of the 9764 MCO LTE module, thermal limitations dictate maximum
adjustment of +/- 20° vertical tilt.
The following figure shows the orderable brackets used for pole mount installation,
depending on the deployment scenario.
Figure 3-1 Pole mount banding and brackets
DRAFT
Tilt bracket assembly
(single Metro Dock)
Tilt bracket assembly
(double Metro Dock)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-6
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Pole mount installation requirements
....................................................................................................................................................................................................................................
Recommended pole anchor materials
Surface structure
Recommended anchor materials
Recommended screw torque
Wood
Screw Hex T M8x50 stainless steel (x2)
7.0 N.m (62.0 lb.in).
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Washer plain M8x16x1.6 stainless steel (x2)
Pole mount installation examples
The following figures show examples of 9764 Metro Dock pole mount installation, pole
mount installation using vertical tilt and pair-mount installation.
Figure 3-2 9764 Metro Dock pole mount using screws
Pole mount - without tilt
Pole mount - with tilt
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-7
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Pole mount installation requirements
....................................................................................................................................................................................................................................
Figure 3-3 9764 Metro Dock pole mount using banding
Pole mount - without tilt
Pole mount - with tilt
DRAFT
Figure 3-4 Double 9764 Metro Dock pole mount
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-8
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Wall mount installation requirements
....................................................................................................................................................................................................................................
Wall mount installation requirements
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Purpose
This topic outlines basic requirements, installation kits and recommended anchor
materials when mounting the Alcatel-Lucent 9764 Metro Dock onto a solid concrete wall
or flat surface, onto tilt brackets or onto a pair-mount bracket.
Wall mount options
The 9764 Metro Dock weighs less than 1 kg (2.2 lbs) and can be easily mounted onto any
flat, sturdy wall for the following installation options:
•
•
9764 Metro Dock attached to directly to a wall or flat surface (using wall spacer)
9764 Metro Dock attached to the vertical/horizontal tilt bracket(s). Vertical/horizontal
tilt bracket(s) are attached to a wall.
•
9764 Metro Dock pair (with or without tilt brackets) attached to a double Metro Dock
support plate. Double Metro Dock support plate is attached to a wall.
This deployment option is used when a 9764 MCO V1.1 LTE 2x1W product or a
9764 MCO LTE 2x2Wproduct is mounted with a 9764 MCO WCDMA 1W product to
form a Multi-Standard Pair configuration.
The available pair-mount installation options are: a 9764 MCO V1.1 B2 LTE 2x1W
product mounted with a 9764 MCO V1.0 B2 WCDMA 1W, a 9764 MCO V1.1 B7
LTE 2x1W product mounted with a 9764 MCO V1.0 B1 WCDMA 1W product and a
9764 MCO V1.1 B2 LTE 2x2W product mounted with a 9764 MCO V1.0 B1
WCDMA 1W product.
Wall mount installation brackets and kits
The following table lists the orderable installation brackets that can be used, depending on
the deployment scenario, for 9764 Metro Dock wall mounting.
Table 3-2
Wall mount installation brackets
Item
Description
Wall spacer
Required when directly attaching the 9764 Metro Dock to a wall or flat
surface and no tilt device is used. The wall spacer keeps a sufficient
distance between the wall and 9764 Metro Dock for airflow purposes.
Note: If vertical/horizontal tilt device is used, then the wall spacer is not
required.
Vertical tilt bracket1
Provides +/- 30° vertical tilt (up/down) adjustment
Note: Can be used in combination with the horizontal installation kit to
provide:
+/- 30° vertical tilt (up/down) adjustment, and
•
+/-45° horizontal tilt (left/right) adjustment
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-9
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
•
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Wall mount installation requirements
....................................................................................................................................................................................................................................
Table 3-2
Wall mount installation brackets
(continued)
Item
Description
Horizontal tilt bracket
Provides +/-45° horizontal tilt (left/right) adjustment
Note: Can be used in combination with the vertical tilt installation kit to
provide:
•
+-45° horizontal tilt (left/right) adjustment, and
•
+/- 30° vertical tilt (up/down) adjustment
Double 9764 MCO support plate
Double 9764 MCO support plate for pair-mount deployment option
Double 9764 MCO extension plate
Extension plate for 3G 9764 MCO and 4G 9764 MCO alignment in a
pair-mount deployment option
Notes:
1.
Due to the length of the 9764 MCO LTE module, thermal limitations dictate maximum
adjustment of +/- 20° vertical tilt.
The following figure shows the orderable brackets used for wall mount installation,
depending on the deployment scenario.
Figure 3-5 Wall mount brackets
Horizontal tilt bracket
(wall only)
Spacer bracket
(wall only)
Vertical tilt bracket
(wall/pole)
Recommended wall anchor materials
Surface structure
Recommended anchor materials
Recommended screw torque
Wood
Screw Hex T M8x70 stainless steel (x3)
7.0 N.m (62.0 lb.in).
Washer plain M8x16x1.6 stainless steel (x3)
Concrete
Screw CHC M6x80 stainless steel (x3)
7.0 N.m (62.0 lb.in).
Washer plain M6x12x1.6mm stainless steel (x3)
DRAFT
Washer spring M6x12x1.2mm stainless steel (x3)
Plug expansion Rawlnut M6x50 (x3)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-10
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Wall mount installation requirements
....................................................................................................................................................................................................................................
Wall mount installation examples
The following figures show examples of 9764 Metro Dock wall mount installation, wall
mount installation using horizontal/vertical tilt and pair-mount installation.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Figure 3-6 9764 Metro Dock wall mount (no tilt)
Figure 3-7 9764 Metro Dock wall mount (with tilt)
Vertical tilt only
Horizontal tilt only
Horizontal/Vertical tilt
combination
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-11
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Wall mount installation requirements
....................................................................................................................................................................................................................................
Figure 3-8 Double 9764 Metro Dock wall mount
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-12
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Pair mount and daisy chain requirements
....................................................................................................................................................................................................................................
Pair mount and daisy chain requirements
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Overview
Two 9764 MCOs can be daisy chained together to share the same backhaul port, reducing
the investment cost needed to connect the 9764 MCOs to the backhaul network and
aggregating the uplink traffic. Daisy chain connectivity scenarios support 9764 MCOs
that are co-located and connected together (for example, connectivity used for pair-mount
configurations) or 9764 MCOs that are separated by some distance.
Pair-mount configuration with daisy chaining
A 9764 MCO LTE connected to the backhaul network plus a 9764 MCO WCDMA
connected to the daisy chain port of the 9764 MCO LTE that is connected to the backhaul
network.
Pair-mount installation options that form a Multi-Standard Pair configuration are:
•
•
•
•
a 9764 MCO V1.1 B2 LTE 2x1W product is pair-mounted with a 9764 MCO V1.0 B2
WCDMA 1W,
a 9764 MCO V1.1 B2/B25 LTE 2x1W product with a 9764 MCO V1.0 B2 WCDMA
1W product
a 9764 MCO V1.1 B2 LTE 2x2W product is pair-mounted with a 9764 MCO V1.0 B2
WCDMA 1W,
a 9764 MCO V1.1 B7 LTE 2x1W product is pair-mounted with a 9764 MCO V1.0 B1
WCDMA 1W product.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-13
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Pair mount and daisy chain requirements
....................................................................................................................................................................................................................................
Metro Dock double support plate
3G WCDMA MCO (1W)
4G LTE MCO (2x1W)
Optical SFP
(SM or MM)
Electrical SFP
or
Optical SFP
(SM or MM)
BH1
BH2
BH1
BH2
Wi-Fi AP
Backhaul
Electrical cable
or
Optical 250 mm breakout
cable (SM or MM)
Optical 250 mm breakout
cable (SM or MM)
Note:
•
An optional Wi-Fi Access Point may be attached to the MCO that is connected to
the backhaul network.
•
To support Carrier Aggregation or Carrier Aggregation readiness the optical daisy
chain SFPs should a Single Mode GBE/CPRI SFP or a Multi Mode GBE/CPRI
SFP.
Pair-mount configuration without daisy chaining
A 9764 MCO LTE connected to the backhaul network plus a 9764 MCO WCDMA
connected to the backhaul network, with no daisy chaining.
Pair-mount installation options that form a Multi-Standard Pair configuration are:
•
a 9764 MCO V1.1 B2 LTE 2x1W product is pair-mounted with a 9764 MCO V1.0 B2
WCDMA 1W,
a 9764 MCO V1.1 B2/B25 LTE 2x1W product with a 9764 MCO V1.0 B2 WCDMA
1W product
•
DRAFT
•
a 9764 MCO V1.1 B2 LTE 2x2W product is pair-mounted with a 9764 MCO V1.0 B2
WCDMA 1W,
a 9764 MCO V1.1 B7 LTE 2x1W product is pair-mounted with a 9764 MCO V1.0 B1
WCDMA 1W product.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-14
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Pair mount and daisy chain requirements
....................................................................................................................................................................................................................................
Metro Dock double support plate
4G LTE MCO (2x1W)
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
3G WCDMA MCO (1W)
Electrical SFP
or
Optical SFP
(SM or MM)
Electrical SFP
or
Optical SFP
(SM or MM)
BH1
BH2
BH1
BH2
Wi-Fi AP
Backhaul
Electrical cable
or
Optical 250 mm breakout
cable (SM or MM)
Backhaul
Electrical cable
or
Optical 250 mm breakout
cable (SM or MM)
Note: An optional Wi-Fi Access Point may be attached to the MCO that is connected
to the backhaul network.
Daisy chaining without pair-mount configuration
A maximum of two 9764 MCO modules and a single Wi-Fi Access Point may be daisy
chained together.
The 9764 MCO LTE supports the following daisy chain configurations:
•
A 9764 MCO LTE connected to the backhaul network plus a 9764 MCO LTE
connected to the daisy chain port of the 9764 MCO LTE that is connected to the
backhaul network.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-15
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
Pair mount and daisy chain requirements
....................................................................................................................................................................................................................................
4G LTE MCO (2x1W)
4G LTE MCO (2x1W)
Optical SFP
(SM or MM)
Electrical SFP
or
Optical SFP
(SM or MM)
BH1
BH2
BH1
BH2
Wi-Fi AP
Optical 250 mm breakout
cable (SM or MM)
Backhaul
Electrical cable
or
Optical 250 mm breakout
cable (SM or MM)
•
A 9764 MCO LTE connected to the backhaul network plus a 9764 MCO WCDMA
connected to the daisy chain port of the 9764 MCO LTE.
4G LTE MCO (2x1W)
3G WCDMA MCO (1W)
Optical SFP
(SM or MM)
Electrical SFP
or
Optical SFP
(SM or MM)
BH1
BH2
BH1
BH2
Wi-Fi AP
Backhaul
DRAFT
Electrical cable
or
Optical 250 mm breakout
cable (SM or MM)
Optical 250 mm breakout
cable (SM or MM)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-16
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Pair mount and daisy chain requirements
....................................................................................................................................................................................................................................
If a 9764 MCO Wi-Fi AP module is to be included in the daisy chain configuration, the
following Wi-Fi AP configurations are supported:
•
•
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock pre-installation
A 9764 MCO Wi-Fi AP module can be attached to each daisy chained 9764 MCO
when the daisy chained MCOs are installed in separate locations (e.g., not co-located
on the same pole).
If the daisy chained MCOs are co-located, only one 9764 MCO Wi-Fi AP module can
be used and the 9764 MCO Wi-Fi AP module must be attached to the 9764 MCO LTE
that is connected to the backhaul network.
Note: An optional Wi-Fi Access Point may be attached to the MCO that is connected
to the backhaul network.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-17
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Overview
....................................................................................................................................................................................................................................
9764 Metro Dock installation
Overview
Purpose
This section provides the installation instructions for mounting the Alcatel-Lucent 9764
Metro Dock onto either a pole or wall with or without the optional tilt mechanism. The
section also provides the installation instructions for a pair-mount configuration. This
deployment option is used when a 9764 MCO V1.1 LTE 2x1W product or a 9764 MCO
V1.1 B2 LTE 2x2W product is mounted with a 9764 MCO WCDMA 1W product to form
a Multi-Standard Pair configuration.
The available pair-mount installation options are:
•
•
•
•
a 9764 MCO V1.1 B2 LTE 2x1W product is mounted with a 9764 MCO V1.0 B2
WCDMA 1W product
a 9764 MCO V1.1 B2/B25 LTE 2x1W product is mounted with a 9764 MCO V1.0 B2
WCDMA 1W product
a 9764 MCO V1.1 B7 LTE 2x1W product is mounted with a 9764 MCO V1.0 B1
WCDMA 1W product.
a 9764 MCO V1.1 B2 LTE 2x2W product is pair-mounted with a 9764 MCO V1.0 B2
WCDMA 1W,
DRAFT
Contents
Procedure 3-1: Pole mount the 9764 Metro Dock
3-19
Procedure 3-2: Pole mount the 9764 Metro Dock using optional tilt brackets
3-25
Procedure 3-3: Wall mount the 9764 Metro Dock
3-35
Procedure 3-4: Wall mount the 9764 Metro Dock using optional tilt brackets
3-40
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair configuration
3-54
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair configuration
3-71
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-18
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-1: Pole mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
Procedure 3-1: Pole mount the 9764 Metro Dock
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Purpose
This topic describes the procedures to be followed when installing the Alcatel-Lucent
9764 Metro Dock onto a pole (wooden or metal).
Prerequisites
A site survey has been conducted and a location for the device has been selected that is
both central to the public space and elevated in order to maximize coverage. Before
installation begins you should ensure the following are in place:
•
Ensure adequate clearance is provided for service access
•
•
•
Ground cable has been routed and the site grounding system is in place
Backhaul cable has been routed and is in place
Any site specific mounting and anchor materials are available.
Attention: The 9764 Metro Dock must be mounted with the appropriate mounting
hardware suitable for the various supporting structures, building materials and
construction methods. Following a site survey, it is the responsibility of the customer
to ensure that:
•
•
the installation support structure is adequate and compliant with ICC IBC (2012):
International Building Code, and all other national and local codes
the appropriate mounting hardware and any necessary supporting material is used.
Mounting requirements and materials
The 9764 Metro Dock can be mounted onto a wooden or metal pole. Refer to the
following for the installation kits, anchor materials and tools for the installation type:
•
For pole mount refer to, “Pole mount installation requirements” (p. 3-5).
•
For a list of standard tools that may be required to support the installation, refer to
“Tools required for installation” (p. 3-4)
Before you begin
Before mounting the 9764 Metro Dock:
•
•
Record the 9764 Metro Dock 18 digit serial number
On the 9764 Metro Dock ensure that the Metro Dock spacer is not attached. If the
spacer is present remove it by unscrewing the M5 screw:
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-19
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-1: Pole mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
M5x12
countersunk screw
Metro Dock
spacer
Metro Dock
spacer removed
Metro Dock pole mount using bolts
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to mount the 9764 Metro Dock onto a wooden pole
using bolts.
...................................................................................................................................................................................................
Measure the height at which the 9764 Metro Dock is to be positioned on the pole. Mark
this point.
...................................................................................................................................................................................................
Using a digital compass determine the planned horizontal (left/right) orientation of the
9764 Metro Dock around the pole. Mark this position.
...................................................................................................................................................................................................
At the identified 9764 Metro Dock position on the pole, mark the upper and lower bolt
anchor holes. The distance between the upper and lower bolt anchor holes should be 270
mm (10.63 inches).
Tip: The 9764 Metro Dock can be placed against the pole and used as a template to
mark the position of the upper and lower bolt anchor holes.
...................................................................................................................................................................................................
DRAFT
Place the 9764 Metro Dock against the pole aligning the upper and lower anchor holes on
the 9764 Metro Dock with the marked anchor hole positions on the pole.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-20
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-1: Pole mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
Tip: Use an adjustable strap, cable ties or heavy duty duct tape to temporarily hold the
9764 Metro Dock against the pole while the bolts are applied.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
...................................................................................................................................................................................................
Place a washer on each of the anchor bolts. Using socket wrench (M8) screw the 9764
Metro Dock onto the pole.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
Upper and lower
Metro Dock anchor holes
(9 mm diameter)
M8x50 stainless steel
hex head screw and
M8x16x1.6 plain washer
...................................................................................................................................................................................................
Finally, check the 9764 Metro Dock is secure and there is no movement of the equipment
on the pole.
E...................................................................................................................................................................................................
N D O F S T E P S
Metro Dock pole mount using bands
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-21
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-1: Pole mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
Perform the following procedure to mount the 9764 Metro Dock onto a pole (wooden or
metal) using standard pole bands.
...................................................................................................................................................................................................
Measure the height at which the 9764 Metro Dock is to be positioned on the pole. Mark
this point.
...................................................................................................................................................................................................
Using a digital compass determine the planned horizontal (left/right) orientation of the
9764 Metro Dock around the pole. Mark this position.
...................................................................................................................................................................................................
From the banding installation kit, take a steel pole band and thread the open end into the
upper two slots on the 9764 Metro Dock.
Upper band
Upper Metro Dock
band slots
Metro Dock
...................................................................................................................................................................................................
At the marked installation point on the pole place the upper pole band around the pole at
the determined height. Carry out any required adjustment of the 9764 Metro Dock around
the pole so that it is pointing in the desired direction.
Tip: Use an adjustable strap, cable ties or heavy duty duct tape to temporarily hold the
9764 Metro Dock against the pole while the lower band is applied.
...................................................................................................................................................................................................
DRAFT
Taking the other steel band, place the band around the lower lug on the 9764 Metro Dock
and the pole.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-22
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-1: Pole mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Metro Dock
Lower band
Lower band lug
...................................................................................................................................................................................................
Once the 9764 Metro Dock is in the correct position and orientation tighten and secure
the bands around the pole. Refer to BAND-IT ® C00169 Hand Tool Operation
Instructions, PO5886.
...................................................................................................................................................................................................
Finally, check the banding is secure, there is no movement of the 9764 Metro Dock
around the pole and that the banding stubs (cut ends) are flattened down with a hammer.
E...................................................................................................................................................................................................
N D O F S T E P S
Standard pole mount example
The following figure shows the 9764 Metro Dock mounted onto a wooden pole using
bolts and a metal pole using bands.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-23
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-1: Pole mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
Metro Dock screwed
onto wooden pole
Metro Dock banded
onto metal pole
How to continue
DRAFT
After mounting the 9764 Metro Dock onto a pole the cables need to be connected.
Continue with the, “9764 Metro Dock cabling” (p. 3-89) section.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-24
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-2: Pole mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
Procedure 3-2: Pole mount the 9764 Metro Dock using optional
tilt brackets
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Purpose
This topic describes the procedures to be followed when installing the Alcatel-Lucent
9764 Metro Dock onto a pole (wooden or metal) using optional vertical tilt brackets.
Prerequisites
A site survey has been conducted and a location for the device has been selected that is
both central to the public space and elevated in order to maximize coverage. Before
installation begins you should ensure the following are in place:
•
Ensure adequate clearance is provided for service access
•
•
•
Ground cable has been routed and the site grounding system is in place
Backhaul cable has been routed and is in place
Any site specific mounting and anchor materials are available.
Attention: The 9764 Metro Dock must be mounted with the appropriate mounting
hardware suitable for the various supporting structures, building materials and
construction methods. Following a site survey, it is the responsibility of the customer
to ensure that:
•
•
the installation support structure is adequate and compliant with ICC IBC (2012):
International Building Code, and all other national and local codes
the appropriate mounting hardware and any necessary supporting material is used.
Mounting requirements and materials
The 9764 Metro Dock can be mounted onto a wooden or metal pole. Refer to the
following for the installation kits, anchor materials and tools for the installation type:
•
For pole mount refer to, “Pole mount installation requirements” (p. 3-5).
•
For a list of standard tools that may be required to support the installation, refer to
“Tools required for installation” (p. 3-4)
Before you begin
Record the 9764 Metro Dock 18 digit serial number before mounting onto a pole.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-25
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-2: Pole mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
Bracket pole mount using bolts
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure attach the vertical tilt bracket a wooden pole using bolts.
...................................................................................................................................................................................................
Measure the height at which the 9764 Metro Dock is to be positioned on the pole. Mark
this point.
...................................................................................................................................................................................................
Using a digital compass determine the planned horizontal (left/right) orientation of the
9764 Metro Dock around the pole. Mark this position.
...................................................................................................................................................................................................
At the identified 9764 Metro Dock position on the pole, mark the upper and lower bolt
anchor holes for the tilt bracket. The distance between the upper and lower bolt anchor
holes should be 200 mm (7.87 inches).
Tip: The vertical tilt bracket can be placed against the pole and used as a template to
mark the position of the upper and lower bolt holes.
...................................................................................................................................................................................................
DRAFT
Depending on the required vertical tilt orientation ensure the bracket is positioned the
correct way up before placing on the pole:
If...
Then...
upward vertical tilt is
required
the tilt bracket must be
positioned with the pivot point
at the top
View...
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-26
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-2: Pole mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
If...
Then...
downward vertical tilt is
required
the tilt bracket must be
positioned with the pivot point
at the bottom
View...
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
...................................................................................................................................................................................................
Place the vertical tilt bracket against the pole aligning the upper and lower anchor holes
on the bracket with the marked bolt hole positions on the pole.
Tip: Use an adjustable strap, cable ties or heavy duty duct tape to temporarily hold the
9764 Metro Dock against the pole while the bolts are applied.
...................................................................................................................................................................................................
Place a washer on each of the anchor bolts. Using a socket wrench (M8) screw the
vertical tilt bracket onto the pole.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
M8x50 stainless steel
hex head screw and
M8x16x1.6 plain washer
Upper and lower
Metro Dock anchor holes
(9 mm diameter)
...................................................................................................................................................................................................
Finally, check the bolts are secure and there is no movement of the bracket on the pole.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-27
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-2: Pole mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Continue onto “Attach 9764 Metro Dock to the tilt bracket” (p. 3-30)
E...................................................................................................................................................................................................
N D O F S T E P S
Bracket pole mount using bands
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to mount the vertical tilt bracket onto a pole (wooden or
metal) using standard pole bands.
...................................................................................................................................................................................................
Measure the height at which the 9764 Metro Dock is to be positioned on the pole. Mark
this point.
...................................................................................................................................................................................................
Using a digital compass determine the planned horizontal (left/right) orientation of the
9764 Metro Dock around the pole. Mark this position.
...................................................................................................................................................................................................
From the banding installation kit, take a steel pole band and thread the open end into the
upper two slots on the tilt bracket.
DRAFT
Taking the other steel band insert and thread the open end into the lower two slots on the
tilt bracket.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-28
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-2: Pole mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
...................................................................................................................................................................................................
Depending on the required vertical tilt orientation ensure the bracket is positioned the
correct way up before placing on the pole:
If...
Then...
upward vertical tilt is
required
the tilt bracket must be
positioned with the pivot point
at the top
downward vertical tilt is
required
the tilt bracket must be
positioned with the pivot point
at the bottom
View...
...................................................................................................................................................................................................
At the marked installation position on the pole wrap the upper and lower pole bands
around the pole at the determined height. Carry out any required adjustment of the 9764
Metro Dock around the pole so that it is pointing in the planned direction.
Tip: Use an adjustable strap, cable ties or heavy duty duct tape to temporarily hold the
9764 Metro Dock against the pole while the bands are applied.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-29
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-2: Pole mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Once the 9764 Metro Dock is in the correct position and orientation tighten and secure
the bands around the pole. Refer to BAND-IT ® C00169 Hand Tool Operation
Instructions, PO5886.
...................................................................................................................................................................................................
Finally, check the banding is secure, there is no movement of the bracket around the pole
and that the banding stubs (cut ends) are flattened down with a hammer.
Banding stubs
(cut ends)
Rear view
...................................................................................................................................................................................................
Continue onto “Attach 9764 Metro Dock to the tilt bracket” (p. 3-30)
E...................................................................................................................................................................................................
N D O F S T E P S
Attach 9764 Metro Dock to the tilt bracket
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach the 9764 Metro Dock to the tilt bracket.
...................................................................................................................................................................................................
DRAFT
Before attaching the 9764 Metro Dock to the tilt bracket ensure that the Metro Dock
spacer is fitted and in place.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-30
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-2: Pole mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
M5x12
countersunk screw
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Metro Dock
spacer
...................................................................................................................................................................................................
Unscrew and remove the two upper M6 bolts and the one lower M6 bolt from the tilt
bracket.
Upper M6 bolts x 2
Lower M6 bolt x 1
...................................................................................................................................................................................................
Position the 9764 Metro Dock against the front of the tilt bracket so that the two upper
bolt holes and the single lower bolt hole on the 9764 Metro Dock are aligned with the
bolts holes on the tilt bracket.
...................................................................................................................................................................................................
From the 9764 Metro Dock side, screw in the two M6 bolts through the upper bolt holes
on the 9764 Metro Dock and into the upper tilt bracket bolt holes.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-31
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-2: Pole mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
Note: Ensure the bolts are positioned at the upper (or lower) part of the elongated hole
for better contact area with the Metro Dock (the chamfered midsection of the
elongated hole is used for banding installation).
...................................................................................................................................................................................................
Move the 9764 Metro Dock metal slider to the “up” position as this allows easier access
to the lower attachment bolt hole:
1. insert supplied key into lock
2. turn the key to its hard stop position to unlock the slider
3. push the slider upwards and turn the key to its hard stop position. The slider is now
locked in the “up” position.
Slider moves upwards
DRAFT
Metro Dock Slider
(in down position)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-32
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-2: Pole mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
From the 9764 Metro Dock side, screw in t the single M6 bolts through the lower bolt
hole on the 9764 Metro Dock and into the lower tilt bracket bolt hole.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Lower Metro Dock
attachment bolt
...................................................................................................................................................................................................
Using a 10 mm ratchet wrench, tighten the two upper and one lower M6 retaining bolts.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Finally move the 9764 Metro Dock metal slider to the “down” position:
1. turn the key to its hard stop position to unlock the slider. The slider will automatically
spring into the “down” position.
2. turn the key to its hard stop position. The slider is now locked in the “down” position
and the key can be removed from the lock.
E...................................................................................................................................................................................................
N D O F S T E P S
Pole mount example (with vertical tilt)
The following figure shows the 9764 Metro Dock, with vertical tilt, mounted onto a
wooden pole using bolts and a metal pole using bands.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-33
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-2: Pole mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
Metro Dock mounted on
wooden pole with vertical tilt
Metro Dock mounted on
metal pole with vertical tilt
How to continue
DRAFT
After mounting the 9764 Metro Dock onto a pole the cables need to be connected.
Continue with the, “9764 Metro Dock cabling” (p. 3-89) section.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-34
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-3: Wall mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
Procedure 3-3: Wall mount the 9764 Metro Dock
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Purpose
This topic describes the procedures to be followed when installing the Alcatel-Lucent
9764 Metro Dock directly onto a wall or solid flat surface.
Prerequisites
A site survey has been conducted and a location for the device has been selected that is
both central to the public space and elevated in order to maximize coverage. Before
installation begins you should ensure the following are in place:
•
Ensure adequate clearance is provided for service access
•
•
•
Ground cable has been routed and the site grounding system is in place
Backhaul cable has been routed and is in place
Any site specific fixing materials are available (for example, bolts, washers and wall
plug materials).
Attention: The 9764 Metro Dock must be mounted with the appropriate mounting
hardware suitable for the various supporting structures, building materials and
construction methods. Following a site survey, it is the responsibility of the customer
to ensure that:
•
•
the installation support structure is adequate and compliant with ICC IBC (2012):
International Building Code, and all other national and local codes
the appropriate mounting hardware and any necessary recommended supporting
anchor fixings are used.
Mounting requirements and materials
The 9764 Metro Dock is less than 1 kg (2.2 lbs) and can be easily mounted onto solid
concrete or wooden flat surface. Refer to the following for the installation kits, anchor
materials and tools for the installation type:
•
For wall mount refer to, “Wall mount installation requirements” (p. 3-9).
•
For a list of standard tools that may be required to support the installation, see “Tools
required for installation” (p. 3-4)
Before you begin
Before mounting the 9764 Metro Dock:
•
•
Record the 9764 Metro Dock 18 digit serial number
On the 9764 Metro Dock ensure that the Metro Dock spacer is not attached. If the
spacer is present remove it by unscrewing the M5 screw:
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-35
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-3: Wall mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
M5x12
countersunk screw
Metro Dock
spacer
Metro Dock
spacer removed
Perform standard wall mount installation
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to mount the 9764 Metro Dock directly onto a wall.
...................................................................................................................................................................................................
Measure the height at which the 9764 Metro Dock is to be positioned on the wall. Mark
this point.
...................................................................................................................................................................................................
DRAFT
At the selected installation location, mark the points on the wall for the anchor holes. See
hole spacing pattern below to use as a guide:
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-36
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-3: Wall mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
267mm
(10.51 inches)
52mm
(2.05 inches)
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Tip: The wall spacer bracket can placed against the wall and used as a template to
mark the position of the upper and lower anchor holes.
Check the horizontal position of the planned holes with a level.
...................................................................................................................................................................................................
If..
Then..
Surface structure is concrete
1. Drill two upper holes and one lower hole at the
marked points to the appropriate depth.
2. Insert screw anchor plugs (Rawlnut M6x50) into the
drilled holes and, using a hammer, tap home until
the plugs are flush with the wall.
Surface structure is wood
Proceed with the next step.
...................................................................................................................................................................................................
Move the 9764 Metro Dock metal slider to the “up” position as this allows easier access
to the lower attachment bolt hole:
1. insert supplied key into lock
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-37
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
2. turn the key to its hard stop position to unlock the slider
3. Push the slider upwards and turn the key to its hard stop position. The slider is now
locked in the “up” position.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-3: Wall mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
Slider moves upwards
Metro Dock Slider
(in down position)
...................................................................................................................................................................................................
Place washers onto the anchor bolts.
Note: The type of anchor bolt used depends on the surface structure:
•
•
Wooden surface: use Screw Hex T M8x70 stainless steel
Concrete surface: use Screw CHC M6x80 stainless steel
...................................................................................................................................................................................................
Align the 9764 Metro Dock bolt holes with the wall spacer bolt holes and thread bolts
through the corresponding set of holes.
...................................................................................................................................................................................................
DRAFT
Screw in the upper and lower bolts into the drilled anchor holes for a concrete surface, or
directly into the wooden surface, to the appropriate depth so that the wall spacer and 9764
Metro Dock are securely attached to the wall.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-38
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-3: Wall mount the 9764 Metro Dock
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Finally move the 9764 Metro Dock metal slider to the “down” position:
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
1. turn the key to its hard stop position to unlock the slider. The slider will automatically
spring into the “down” position
2. turn the key to its hard stop position. The slider is now locked in the “down” position
and the key can be removed from the lock.
E...................................................................................................................................................................................................
N D O F S T E P S
Standard wall mount example
The following figure depicts a standard wall mount.
How to continue
After mounting the 9764 Metro Dock onto a wall the cables need to be connected.
Continue with the, “9764 Metro Dock cabling” (p. 3-89) section.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-39
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
Procedure 3-4: Wall mount the 9764 Metro Dock using optional
tilt brackets
Purpose
This topic describes the procedures to be followed when the Alcatel-Lucent 9764 Metro
Dock is required to be mounted onto a wall or solid flat surface using tilt brackets
(vertical, horizontal or combined horizontal/vertical).
Prerequisites
A site survey has been conducted and a location for the device has been selected that is
both central to the public space and elevated in order to maximize coverage. Before
installation begins you should ensure the following are in place:
•
Ensure adequate clearance is provided for service access
•
•
•
Ground cable has been routed and the site grounding system is in place
Backhaul cable has been routed and is in place
Any site specific fixing materials are available (for example, bolts, washers and wall
plug materials).
Attention: The 9764 Metro Dock must be mounted with the appropriate mounting
hardware suitable for the various supporting structures, building materials and
construction methods. Following a site survey, it is the responsibility of the customer
to ensure that:
•
•
the installation support structure is adequate and compliant with ICC IBC (2012):
International Building Code, and all other national and local codes
the appropriate mounting hardware and any necessary supporting anchor fixings
are used.
Mounting requirements and materials
The 9764 Metro Dock is less than 1 kg (2.2 lbs) and can be easily mounted onto solid
concrete or wooden flat surface. Refer to the following for the installation kits, anchor
materials and tools for the installation type:
•
For wall mount refer to, “Wall mount installation requirements” (p. 3-9).
•
For a list of standard tools that may be required to support the installation, see “Tools
required for installation” (p. 3-4)
Before you begin
DRAFT
Record the 9764 Metro Dock 18 digit serial number before mounting onto a wall.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-40
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
Prepare surface for bracket mounting
WARNING
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to prepare a wall or solid flat surface for mounting tilt
brackets.
...................................................................................................................................................................................................
At the selected installation location, mark the points on the wall for the bracket anchor
holes. See drill hole pattern below to use as a guide:
52 mm
(2.05 inches)
270 mm
(10.63 inches)
Tip: If the tilt bracket is available it can be placed against the wall and be used as a
template to mark the points on the wall for the bracket anchor holes.
Check the horizontal marked position of the holes with a level.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-41
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
If..
Then..
Surface structure is concrete
1. Drill two upper holes and one lower hole at the
marked points to the appropriate depth.
2. Insert screw anchor plugs (Rawlnut M6x50) into the
drilled holes and, using a hammer, tap home until
the plugs are flush with the wall.
Surface structure is wood
Mount combined horizontal/vertical tilt brackets
...................................................................................................................................................................................................
Once the mounting surface has been prepared the tilt brackets can be attached. Continue
with one of the following procedures depending on the tilt configuration:
If..
Then..
Attaching vertical tilt
brackets
Carry out the procedure, “Mount the vertical tilt bracket”
(p. 3-42)
Attaching horizontal tilt
brackets
Carry out the procedure, “Mount the horizontal tilt bracket”
(p. 3-44)
Attaching combined
horizontal and vertical tilt
brackets
Carry out the procedure, “Mount combined horizontal/vertical
tilt brackets” (p. 3-46)
E...................................................................................................................................................................................................
N D O F S T E P S
Mount the vertical tilt bracket
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
DRAFT
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-42
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
Perform the following procedure to attach a vertical tilt bracket onto a flat surface or wall.
...................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Remove the two tilt angle positioning gauge bolts on either side of the vertical tilt bracket
and allow the front part of the bracket to pivot away allowing easier access to the bracket
anchor holes.
Bracket anchor holes
Tilt angle positioning
gauge bolt
Tilt angle positioning
gauge bolt
Bracket anchor holes
...................................................................................................................................................................................................
Depending on the required vertical tilt orientation ensure the bracket is positioned the
correct way up before placing on the wall:
If...
Then...
upward vertical tilt is
required
the tilt bracket must be
positioned with the pivot point
at the top
downward vertical tilt is
required
the tilt bracket must be
positioned with the pivot point
at the bottom
View...
...................................................................................................................................................................................................
Place washers onto the anchor bolts.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-43
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
Note: The type of anchor bolt used depends on the surface structure:
•
Wooden surface: use Screw Hex T M8x70 stainless steel
•
Concrete surface: use Screw CHC M6x80 stainless steel
...................................................................................................................................................................................................
At the selected installation location, position the tilt bracket so the anchor holes on the
bracket align with the anchor holes either drilled or marked on the wall.
...................................................................................................................................................................................................
For each anchor hole (upper and lower) insert bolts through the tilt bracket anchor holes.
...................................................................................................................................................................................................
Screw the upper and lower bolts into the drilled anchor holes for a concrete surface, or
directly into the wooden surface, to the appropriate depth so that the bracket is firmly
secured to the wall or flat surface.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Once the tilt bracket is mounted the 9764 Metro Dock can be attached. Continue with
“Attach 9764 Metro Dock to the tilt bracket” (p. 3-30).
E...................................................................................................................................................................................................
N D O F S T E P S
Mount the horizontal tilt bracket
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach the horizontal tilt bracket onto a flat surface or
wall.
...................................................................................................................................................................................................
DRAFT
Remove the two tilt angle positioning gauge bolts from the top and bottom of the
horizontal tilt bracket and allow the front part of the bracket to pivot away allowing easier
access to the bracket anchor holes.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-44
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
Tilt angle
positioning gauge bolt
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Bracket anchor holes
Bracket anchor holes
Tilt angle
positioning gauge bolt
...................................................................................................................................................................................................
Depending on the required horizontal tilt orientation ensure the bracket is the correct way
up before securing the bracket onto the wall:
If...
Then...
left horizontal tilt is required
the tilt bracket must be
positioned with the pivot point
on the left
right horizontal tilt is required
the tilt bracket must be
positioned with the pivot point
on the right
View...
...................................................................................................................................................................................................
Place washers onto the anchor bolts.
Note: The type of anchor bolt used depends on the surface structure:
•
Wooden surface: use Screw Hex T M8x70 stainless steel
•
Concrete surface: use Screw CHC M6x80 stainless steel
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-45
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
At the selected installation location, position the tilt bracket so the anchor holes on the
bracket align with the anchor holes either drilled or marked on the wall.
...................................................................................................................................................................................................
For each anchor hole (upper and lower) insert bolts through the tilt bracket anchor holes.
...................................................................................................................................................................................................
Screw the upper and lower bolts into the drilled anchor holes for a concrete surface, or
directly into the wooden surface, to the appropriate depth so that the bracket is firmly
secured to the wall or flat surface.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Once the tilt bracket is mounted the 9764 Metro Dock can be attached. Continue with
“Attach 9764 Metro Dock to the tilt bracket” (p. 3-30).
E...................................................................................................................................................................................................
N D O F S T E P S
Mount combined horizontal/vertical tilt brackets
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach the combined horizontal/vertical tilt bracket
onto a flat surface or wall.
...................................................................................................................................................................................................
Firstly combine the horizontal and vertical tilt brackets.
DRAFT
Unscrew and remove the two upper and two lower M6 bolts on the front of the horizontal
tilt bracket.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-46
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
...................................................................................................................................................................................................
Align the attachment holes on the vertical tilt bracket with the attachments holes on the
horizontal tilt bracket.
Important! Ensure the brackets are combined in the correct way based on the planned
horizontal and vertical tilt orientation of the equipment.
If...
Then...
left horizontal tilt and
downward vertical tilt is
required
the brackets should be attached with
the horizontal bracket pivot point on
the left and the vertical bracket pivot
point at the bottom
or
right horizontal tilt and
upward vertical tilt is required
Note: when positioning on a wall the
bracket assembly can be turned
through 1800 for right horizontal tilt
and upward vertical tilt
right horizontal tilt and
downward vertical tilt is
required
the brackets should be attached with
the horizontal bracket pivot point on
the right and the vertical bracket pivot
point at the bottom
or
left horizontal tilt and upward
vertical tilt is required
View...
Note: when positioning on a wall the
bracket assembly can be turned
through 1800 for left horizontal tilt and
upward vertical tilt
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-47
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Insert the two upper and two lower bolts through the attachment holes on the vertical tilt
bracket and through the attachment holes on the horizontal tilt bracket.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
For each bolt, screw on the retaining nut. Using a 10 mm ratchet wrench, tighten the two
upper and two lower M6 retaining bolts so that the brackets are securely attached.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
The horizontal and vertical tilt brackets are now combined and can be attached to the
wall.
Remove the two tilt angle positioning gauge bolts from the top and bottom of the
horizontal tilt bracket and allow the front part of the bracket to pivot away allowing
access to the bracket anchor holes.
Tilt angle
positioning gauge bolt
Bracket anchor holes
Bracket anchor holes
Tilt angle
positioning gauge bolt
...................................................................................................................................................................................................
Place washers onto the anchor bolts.
DRAFT
Note: The type of anchor bolt used depends on the surface structure:
•
•
Wooden surface: use Screw Hex T M8x70 stainless steel
Concrete surface: use Screw CHC M6x80 stainless steel
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-48
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
At the selected installation location, position the tilt bracket so the anchor holes on the
bracket align with the anchor holes either drilled or marked on the wall.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Important! Ensure the combined brackets are positioned on the wall correctly based
on the planned horizontal and vertical tilt orientation of the equipment.
...................................................................................................................................................................................................
For each anchor hole (upper and lower) insert bolts through the tilt bracket anchor holes.
...................................................................................................................................................................................................
Screw the upper and lower bolts into the drilled anchor holes for a concrete surface, or
directly into the wooden surface, to the appropriate depth so that the bracket is firmly
secured to the wall or flat surface.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Once the tilt bracket is mounted the 9764 Metro Dock can be attached. Continue with
“Attach 9764 Metro Dock to the tilt bracket” (p. 3-30).
E...................................................................................................................................................................................................
N D O F S T E P S
Attach 9764 Metro Dock to the tilt bracket
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach the 9764 Metro Dock to the tilt bracket.
...................................................................................................................................................................................................
Before attaching the 9764 Metro Dock to the tilt bracket ensure that the Metro Dock
spacer is fitted and in place.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-49
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
M5x12
countersunk screw
Metro Dock
spacer
...................................................................................................................................................................................................
Unscrew and remove the two upper M6 bolts and the one lower M6 bolt from the tilt
bracket.
Upper M6 bolts x 2
Lower M6 bolt x 1
...................................................................................................................................................................................................
Position the 9764 Metro Dock against the front of the tilt bracket so that the two upper
bolt holes and the single lower bolt hole on the 9764 Metro Dock are aligned with the
bolts holes on the tilt bracket.
...................................................................................................................................................................................................
DRAFT
From the 9764 Metro Dock side, screw in the two M6 bolts through the upper bolt holes
on the 9764 Metro Dock and into the upper tilt bracket bolt holes.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-50
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Note: Ensure the bolts are positioned at the upper (or lower) part of the elongated hole
for better contact area with the Metro Dock (the chamfered midsection of the
elongated hole is used for banding installation).
...................................................................................................................................................................................................
Move the 9764 Metro Dock metal slider to the “up” position as this allows easier access
to the lower attachment bolt hole:
1. insert supplied key into lock
2. turn the key to its hard stop position to unlock the slider
3. push the slider upwards and turn the key to its hard stop position. The slider is now
locked in the “up” position.
Slider moves upwards
Metro Dock Slider
(in down position)
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-51
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
From the 9764 Metro Dock side, screw in t the single M6 bolts through the lower bolt
hole on the 9764 Metro Dock and into the lower tilt bracket bolt hole.
Lower Metro Dock
attachment bolt
...................................................................................................................................................................................................
Using a 10 mm ratchet wrench, tighten the two upper and one lower M6 retaining bolts.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Finally move the 9764 Metro Dock metal slider to the “down” position:
1. turn the key to its hard stop position to unlock the slider. The slider will automatically
spring into the “down” position.
2. turn the key to its hard stop position. The slider is now locked in the “down” position
and the key can be removed from the lock.
E...................................................................................................................................................................................................
N D O F S T E P S
Wall mount with horizontal/vertical tilt example
DRAFT
The following figure depicts a wall mount installation with horizontal/vertical tilt.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-52
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-4: Wall mount the 9764 Metro Dock using
optional tilt brackets
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
How to continue
After mounting the 9764 Metro Dock onto a wall the cables need to be connected.
Continue with the, “9764 Metro Dock cabling” (p. 3-89) section.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-53
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
Purpose
This topic describes the procedures to be followed when installing the Alcatel-Lucent
9764 Metro Dock in a pair mount configuration onto a pole. This deployment option is
used when a 9764 MCO V1.1 LTE 2x1W product or a 9764 MCO LTE 2x2W product is
mounted with a 9764 MCO WCDMA 1W product to form a Multi-Standard Pair
configuration.
The available pair-mount installation options are:
•
a 9764 MCO V1.1 B2 LTE 2x1W product is mounted with a 9764 MCO V1.0 B2
WCDMA 1W product
•
a 9764 MCO V1.1 B2/B25 LTE 2x1W product is mounted with a 9764 MCO V1.0 B2
WCDMA 1W product
a 9764 MCO V1.1 B2 LTE 2x2W product is pair-mounted with a 9764 MCO V1.0 B2
WCDMA 1W,
a 9764 MCO V1.1 B7 LTE 2x1W product is mounted with a 9764 MCO V1.0 B1
WCDMA 1W product.
•
•
Prerequisites
A site survey has been conducted and a location for the device has been selected that is
both central to the public space and elevated in order to maximize coverage. Before
installation begins you should ensure the following are in place:
•
•
•
•
Ensure adequate clearance is provided for service access
Ground cable has been routed and the site grounding system is in place
Backhaul cable has been routed and is in place
Any site specific mounting and anchor materials are available.
Attention: The 9764 Metro Dock must be mounted with the appropriate mounting
hardware suitable for the various supporting structures, building materials and
construction methods. Following a site survey, it is the responsibility of the customer
to ensure that:
•
DRAFT
•
the installation support structure is adequate and compliant with ICC IBC (2012):
International Building Code, and all other national and local codes
the appropriate mounting hardware and any necessary supporting material is used.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-54
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Mounting requirements and materials
For pole mounting the 9764 Metro Dock in a pair mount configuration refer to the
following for the installation kits, anchor materials and tools required for this installation
type:
•
•
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
For pole mount installation kits and materials refer to, “Pole mount installation
requirements” (p. 3-5).
For a list of standard tools that may be required to support the installation, see “Tools
required for installation” (p. 3-4)
Before you begin
Record both the 9764 Metro Dock 18 digit serial number for future reference before
mounting onto the support bracket.
Attach support plate to a pole
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to mount the double Metro Dock support plate onto a
pole. The procedure also includes attaching the extension plate to the support plate.
Note: The extension plate is required to mount the 3G MCO (allowing alignment with the
4G MCO in pair-mount deployment) and can be attached to either the left or right side of
the double Metro Dock support plate, depending on customer preference.
...................................................................................................................................................................................................
Measure the height at which the double Metro Dock support plate is to be positioned on
pole. Mark this point.
...................................................................................................................................................................................................
Using a digital compass determine the planned horizontal (left/right) orientation of the
support plate around the pole. Mark this position.
...................................................................................................................................................................................................
From the banding installation kit, locate the two steel pole bands. Thread the open end of
one band through the upper two banding slots on the support plate and the other pole band
through the lower two banding slots on the support plate.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-55
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Upper bracket banding slots
Lower bracket banding slots
...................................................................................................................................................................................................
At the marked installation point on the pole place the upper and lower pole bands around
the pole at the determined height. Carry out any required adjustment of the support plate
around the pole so that it is pointing in the desired direction.
...................................................................................................................................................................................................
Once the support plate is in the correct position and orientation tighten and secure the
bands around the pole using the banding tool.
Refer to BAND-IT ® C00169 Hand Tool Operation Instructions, PO5886.
...................................................................................................................................................................................................
DRAFT
Check the banding is secure, there is no movement of the support plate around the pole
and that the banding stubs (cut ends) are flattened down with a hammer.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-56
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Finally attach the extension plate to the double Metro Dock support plate.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Note: The extension plate used for mounting the 3G MCO can be attached to either
the left or the right side of the double support plate depending on customer preference
(the example shows the extension plate attached on the right side of the double
support plate).
1. Remove the three bolts (either the left set of three or the right set of three) from the
support plate.
2. Position the extension plate in front of the support plate so that both sets of
attachment holes are aligned.
3. Replace the set of three bolts. Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Once the Metro Dock double support plate (including extension plate) has been mounted
onto a pole continue with one of the following procedures:
•
If no tilt is required, continue with “Attach 9764 Metro Dock to brackets” (p. 3-66).
•
If tilt is required continue with one of the following procedures depending on the tilt
configuration:
Then..
Vertical tilt only
Carry out the procedure, “Attach vertical tilt brackets” (p. 3-58)
Horizontal tilt only
Carry out the procedure, “Attach horizontal tilt bracket”
(p. 3-60)
Combined horizontal
and vertical tilt
Carry out the procedure, “Attach combined horizontal/vertical
tilt brackets” (p. 3-63)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-57
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
For..
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
Attach vertical tilt brackets
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach vertical tilt brackets to the double support
bracket.
...................................................................................................................................................................................................
Unscrew and remove the set of two upper M6 bolts and the one lower M6 bolt from both
the support bracket and the extension plate.
...................................................................................................................................................................................................
DRAFT
Remove the two tilt angle positioning gauge bolts on either side of the vertical tilt bracket
and allow the front part of the bracket to pivot away allowing easier access to the bracket
anchor holes.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-58
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Bracket anchor holes
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Tilt angle positioning
gauge bolt
Tilt angle positioning
gauge bolt
Bracket anchor holes
...................................................................................................................................................................................................
Depending on the required vertical tilt orientation ensure the bracket is positioned the
correct way up before placing on the support plate:
If...
Then...
upward vertical tilt is
required
the tilt bracket must be
positioned with the pivot point
at the top
downward vertical tilt is
required
the tilt bracket must be
positioned with the pivot point
at the bottom
View...
...................................................................................................................................................................................................
Position the vertical tilt bracket against the front of the support bracket so that the two
upper bolt holes and the single lower bolt hole on the tilt bracket are aligned with the
bolts holes on the support bracket.
...................................................................................................................................................................................................
From the tilt bracket side, screw in the two upper and one lower M6 bolts through the
anchor holes on the tilt bracket and into the support bracket bolt holes.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-59
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Using a 10 mm ratchet wrench, tighten the two upper and one lower M6 retaining bolts.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Repeat the above procedure for attaching the second vertical tilt bracket to the extension
plate.
...................................................................................................................................................................................................
Once the tilt brackets have been attached to the support plate the 9764 Metro Dock(s) can
be attached to the tilt brackets. Continue with “Attach 9764 Metro Dock to brackets”
(p. 3-66).
E...................................................................................................................................................................................................
N D O F S T E P S
Attach horizontal tilt bracket
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach horizontal tilt brackets to the double support
bracket.
...................................................................................................................................................................................................
DRAFT
Unscrew and remove the set of two upper M6 bolts and the one lower M6 bolt from both
the support bracket and the extension plate.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-60
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
...................................................................................................................................................................................................
Remove the two tilt angle positioning gauge bolts from the top and bottom of the
horizontal tilt bracket and allow the front part of the bracket to pivot away allowing easier
access to the bracket anchor holes.
Tilt angle
positioning gauge bolt
Bracket anchor holes
Bracket anchor holes
Tilt angle
positioning gauge bolt
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-61
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Depending on the required horizontal tilt orientation ensure the bracket is the correct way
up before securing the tilt brackets to the support plate:
If...
Then...
left horizontal tilt is required
the tilt bracket must be
positioned with the pivot point
on the left
right horizontal tilt is required
the tilt bracket must be
positioned with the pivot point
on the right
View...
...................................................................................................................................................................................................
Position the horizontal tilt bracket against the front of the support bracket so that the two
upper bolt holes and the single lower bolt hole on the tilt bracket are aligned with the
bolts holes on the support bracket.
...................................................................................................................................................................................................
From the tilt bracket side, screw in the two upper and one lower M6 bolts through the
anchor holes on the tilt bracket and into the support bracket bolt holes.
...................................................................................................................................................................................................
Using a 10 mm ratchet wrench, tighten the two upper and one lower M6 retaining bolts.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
DRAFT
Repeat the above procedure for attaching the second horizontal tilt bracket to the
extension plate.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-62
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Once the tilt brackets have been attached to the support plate the 9764 Metro Dock(s) can
be attached to the tilt brackets. Continue with “Attach 9764 Metro Dock to brackets”
(p. 3-66).
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
E...................................................................................................................................................................................................
N D O F S T E P S
Attach combined horizontal/vertical tilt brackets
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach the combined horizontal/vertical tilt brackets to
the double support bracket.
...................................................................................................................................................................................................
Firstly combine the horizontal and vertical tilt brackets by unscrewing and removing the
two upper and two lower M6 bolts on the front of the horizontal tilt bracket.
...................................................................................................................................................................................................
Align the attachment holes on the vertical tilt bracket with the attachments holes on the
horizontal tilt bracket.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-63
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Important! Ensure the brackets are combined in the correct way based on the planned
horizontal and vertical tilt orientation of the equipment.
If...
Then...
left horizontal tilt and
downward vertical tilt is
required
the brackets should be attached with
the horizontal bracket pivot point on
the left and the vertical bracket pivot
point at the bottom
or
right horizontal tilt and
upward vertical tilt is required
Note: when positioning on a wall the
bracket assembly can be turned
through 1800 for right horizontal tilt
and upward vertical tilt
right horizontal tilt and
downward vertical tilt is
required
the brackets should be attached with
the horizontal bracket pivot point on
the right and the vertical bracket pivot
point at the bottom
or
left horizontal tilt and upward
vertical tilt is required
View...
Note: when positioning on a wall the
bracket assembly can be turned
through 1800 for left horizontal tilt and
upward vertical tilt
...................................................................................................................................................................................................
Insert the two upper and two lower bolts through the attachment holes on the vertical tilt
bracket and through the attachment holes on the horizontal tilt bracket.
Using a 10 mm ratchet wrench, tighten the two upper and two lower M6 retaining bolts so
that the brackets are securely attached.
DRAFT
Recommended screw torque; 7.0 N.m (62.0 lb.in).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-64
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Unscrew and remove the set of two upper M6 bolts and the one lower M6 bolt from both
the support bracket and the extension plate.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
...................................................................................................................................................................................................
Remove the two tilt angle positioning gauge bolts from the top and bottom of the
horizontal tilt bracket and allow the front part of the bracket to pivot away allowing easier
access to the bracket anchor holes.
Tilt angle
positioning gauge bolt
Bracket anchor holes
Bracket anchor holes
Tilt angle
positioning gauge bolt
...................................................................................................................................................................................................
Position the combined tilt bracket against the front of the support bracket so that the two
upper bolt holes and the single lower bolt hole on the tilt bracket are aligned with the
bolts holes on the support bracket.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-65
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
From the tilt bracket side, screw in the two upper and one lower M6 bolts through the
anchor holes on the tilt bracket and into the support bracket bolt holes.
...................................................................................................................................................................................................
Using a 10 mm ratchet wrench, tighten the two upper and one lower M6 retaining bolts.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Repeat the above procedure for attaching the second horizontal/vertical tilt bracket to the
extension plate.
...................................................................................................................................................................................................
10
Once the tilt brackets have been attached to the support plate the 9764 Metro Dock(s) can
be attached to the tilt brackets. Continue with “Attach 9764 Metro Dock to brackets”
(p. 3-66).
E...................................................................................................................................................................................................
N D O F S T E P S
Attach 9764 Metro Dock to brackets
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach a pair of 9764 Metro Dock's directly to the
support plate or to tilt brackets (attached to the support plate).
...................................................................................................................................................................................................
DRAFT
Before attaching each 9764 Metro Dock ensure that the Metro Dock spacer is fitted and in
place on both 9764 Metro Dock's.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-66
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
M5x12
countersunk screw
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Metro Dock
spacer
...................................................................................................................................................................................................
Unscrew and remove the set of two upper M6 bolts and the one lower M6 bolt from the
both sides (left and right) of the support plate or if tilt brackets are attached from each of
the tilt brackets.
9764 Metro Dock attachment
bolts on support plate
9764 Metro Dock attachment
bolts on tilt bracket
...................................................................................................................................................................................................
Position a 9764 Metro Dock against the front of the bracket (support plate or tilt) so that
the two upper bolt holes and the single lower bolt hole on the 9764 Metro Dock are
aligned with the bolts holes on the bracket.
...................................................................................................................................................................................................
From the 9764 Metro Dock side, screw in the two M6 bolts back through the upper bolt
holes on the 9764 Metro Dock and into the upper bracket bolt holes.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-67
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Note: Ensure the bolts are positioned at the upper (or lower) part of the elongated hole
for better contact area with the Metro Dock (the chamfered midsection of the
elongated hole is used for banding installation).
...................................................................................................................................................................................................
Move the 9764 Metro Dock metal slider to the “up” position as this allows easier access
to the lower attachment bolt hole:
1. insert supplied key into lock
2. turn the key to its hard stop position to unlock the slider
3. push the slider upwards and turn the key to its hard stop position. The slider is now
locked in the “up” position.
Slider moves upwards
DRAFT
Metro Dock Slider
(in down position)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-68
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
From the 9764 Metro Dock side, screw in the single M6 bolts back through the lower bolt
hole on the 9764 Metro Dock and into the lower bracket bolt hole.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Lower Metro Dock
attachment bolt
...................................................................................................................................................................................................
Using a 10 mm ratchet wrench, tighten the two upper and one lower M6 retaining bolts.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Finally move the 9764 Metro Dock metal slider to the “down” position:
1. turn the key to its hard stop position to unlock the slider. The slider will automatically
spring into the “down” position.
2. turn the key to its hard stop position. The slider is now locked in the “down” position
and the key can be removed from the lock.
...................................................................................................................................................................................................
Repeat the above procedure for attaching the second 9764 Metro Dock to the other side of
the support plate or, if tilt brackets are attached, to the second tilt bracket.
E...................................................................................................................................................................................................
N D O F S T E P S
Pole mount example (with tilt)
The following figure shows an example of a 9764 Metro Dock pair configuration (with
tilt brackets attached), mounted onto a pole.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-69
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-5: Pole mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
How to continue
DRAFT
After mounting the 9764 Metro Dock pair onto the double support bracket the cables need
to be connected. Continue with the, “9764 Metro Dock cabling” (p. 3-89) section.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-70
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Purpose
This topic describes the procedures to be followed when installing the Alcatel-Lucent
9764 Metro Dock in a pair-mount configuration onto a wall or flat surface. This
deployment option is used when a 9764 MCO V1.1 LTE 2x1W product or a 9764 MCO
LTE 2x2W product is mounted with a 9764 MCO WCDMA 1W product to form a
Multi-Standard Pair configuration.
The available pair-mount installation options are:
•
a 9764 MCO V1.1 B2 LTE 2x1W product is mounted with a 9764 MCO V1.0 B2
WCDMA 1W product
•
a 9764 MCO V1.1 B2/B25 LTE 2x1W product is mounted with a 9764 MCO V1.0 B2
WCDMA 1W product
a 9764 MCO V1.1 B2 LTE 2x2W product is pair-mounted with a 9764 MCO V1.0 B2
WCDMA 1W,
a 9764 MCO V1.1 B7 LTE 2x1W product is mounted with a 9764 MCO V1.0 B1
WCDMA 1W product.
•
•
Prerequisites
A site survey has been conducted and a location for the device has been selected that is
both central to the public space and elevated in order to maximize coverage. Before
installation begins you should ensure the following are in place:
•
•
•
•
Ensure adequate clearance is provided for service access
Ground cable has been routed and the site grounding system is in place
Backhaul cable has been routed and is in place
Any site specific fixing materials are available (for example, bolts, washers and wall
plug materials).
Attention: The 9764 Metro Dock must be mounted with the appropriate mounting
hardware suitable for the various supporting structures, building materials and
construction methods. Following a site survey, it is the responsibility of the customer
to ensure that:
•
•
the installation support structure is adequate and compliant with ICC IBC (2012):
International Building Code, and all other national and local codes
the appropriate mounting hardware and any necessary recommended supporting
anchor fixings are used.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-71
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Mounting requirements and materials
For wall mounting the 9764 Metro Dock in a pair-mount configuration refer to the
following for the installation kits, anchor materials and tools required for this installation
type:
•
•
For wall mount installation kits and materials refer to, “Wall mount installation
requirements” (p. 3-9).
For a list of standard tools that may be required to support the installation, see “Tools
required for installation” (p. 3-4)
Before you begin
Record both the 9764 Metro Dock 18 digit serial numbers for future reference before
mounting onto the support bracket.
Attach support plate to a wall or flat surface
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to mount the double Metro Dock support plate onto a
wall or flat surface. The procedure also includes attaching the extension plate to the
support plate.
Note: The extension plate is required to mount the 3G MCO (allowing alignment with the
4G MCO in pair-mount deployment) and can be attached to either the left or right side of
the double Metro Dock support plate, depending on customer preference.
...................................................................................................................................................................................................
Measure the height at which the double Metro Dock support plate is to be positioned on
the wall. Mark this point.
...................................................................................................................................................................................................
DRAFT
At the selected installation location, mark the points on the wall for the six support plate
anchor holes. See pattern below for the hole spacing dimensions.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-72
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
120 mm
(4.7 inches)
120 mm
(4.7 inches)
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
200 mm
(7.87 inches)
Tip: If the double Metro Dock support plate is available it can placed against the wall
and used as a template to mark the position of the upper and lower anchor holes.
...................................................................................................................................................................................................
If..
Then..
Surface structure is concrete
1. Drill three upper holes and three lower holes at the
marked points to the appropriate depth.
2. Insert screw anchor plugs (Rawlnut M6x50) into the
drilled holes and, using a hammer, tap home until
the plugs are flush with the wall.
Surface structure is wood
Proceed with the next step.
...................................................................................................................................................................................................
Place washers onto the anchor bolts.
Note: The type of anchor bolt used depends on the surface structure:
•
Concrete surface: use Screw CHC M6x80 stainless steel
•
Wooden surface: use Screw Hex T M8x70 stainless steel
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-73
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Align the double Metro Dock support plate bolt holes with the corresponding holes on the
wall.
Screw in the upper and lower bolts into the drilled anchor holes for a concrete surface, or
directly into the wooden surface, to the appropriate depth so that the support plate is
securely attached to the wall. Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Finally attach the extension plate to the double Metro Dock support plate.
Note: The extension plate used for mounting the 3G MCO can be attached to either
the left or the right side of the double support plate depending on customer preference
(the example shows the extension plate attached on the right side of the double
support plate).
1. Remove the three bolts (either the left set of three or the right set of three) from the
support plate.
DRAFT
2. Position the extension plate in front of the support plate so that both sets of
attachment holes are aligned.
3. Replace the set of three bolts. Recommended screw torque; 7.0 N.m (62.0 lb.in).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-74
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
...................................................................................................................................................................................................
Once the Metro Dock double support plate (including extension plate) has been mounted
onto a wall or flat surface continue with one of the following procedures:
•
If no tilt is required, continue with “Attach 9764 Metro Dock to brackets” (p. 3-66).
•
If tilt is required continue with one of the following procedures depending on the tilt
configuration:
For..
Then..
Vertical tilt only
Carry out the procedure, “Attach vertical tilt brackets” (p. 3-58)
Horizontal tilt only
Carry out the procedure, “Attach horizontal tilt bracket”
(p. 3-60)
Combined horizontal
and vertical tilt
Carry out the procedure, “Attach combined horizontal/vertical
tilt brackets” (p. 3-63)
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-75
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Attach vertical tilt brackets
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach vertical tilt brackets to the double support
bracket.
...................................................................................................................................................................................................
Unscrew and remove the set of two upper M6 bolts and the one lower M6 bolt from both
the support bracket and the extension plate.
...................................................................................................................................................................................................
DRAFT
Remove the two tilt angle positioning gauge bolts on either side of the vertical tilt bracket
and allow the front part of the bracket to pivot away allowing easier access to the bracket
anchor holes.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-76
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Bracket anchor holes
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Tilt angle positioning
gauge bolt
Tilt angle positioning
gauge bolt
Bracket anchor holes
...................................................................................................................................................................................................
Depending on the required vertical tilt orientation ensure the bracket is positioned the
correct way up before placing on the support plate:
If...
Then...
upward vertical tilt is
required
the tilt bracket must be
positioned with the pivot point
at the top
downward vertical tilt is
required
the tilt bracket must be
positioned with the pivot point
at the bottom
View...
...................................................................................................................................................................................................
Position the vertical tilt bracket against the front of the support bracket so that the two
upper bolt holes and the single lower bolt hole on the tilt bracket are aligned with the
bolts holes on the support bracket.
...................................................................................................................................................................................................
From the tilt bracket side, screw in the two upper and one lower M6 bolts through the
anchor holes on the tilt bracket and into the support bracket bolt holes.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-77
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Using a 10 mm ratchet wrench, tighten the two upper and one lower M6 retaining bolts.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Repeat the above procedure for attaching the second vertical tilt bracket to the extension
plate.
...................................................................................................................................................................................................
Once the tilt brackets have been attached to the support plate the 9764 Metro Dock(s) can
be attached to the tilt brackets. Continue with “Attach 9764 Metro Dock to brackets”
(p. 3-66).
E...................................................................................................................................................................................................
N D O F S T E P S
Attach horizontal tilt bracket
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach horizontal tilt brackets to the double support
bracket.
...................................................................................................................................................................................................
DRAFT
Unscrew and remove the set of two upper M6 bolts and the one lower M6 bolt from both
the support bracket and the extension plate.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-78
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
...................................................................................................................................................................................................
Remove the two tilt angle positioning gauge bolts from the top and bottom of the
horizontal tilt bracket and allow the front part of the bracket to pivot away allowing easier
access to the bracket anchor holes.
Tilt angle
positioning gauge bolt
Bracket anchor holes
Bracket anchor holes
Tilt angle
positioning gauge bolt
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-79
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Depending on the required horizontal tilt orientation ensure the bracket is the correct way
up before securing the tilt brackets to the support plate:
If...
Then...
left horizontal tilt is required
the tilt bracket must be
positioned with the pivot point
on the left
right horizontal tilt is required
the tilt bracket must be
positioned with the pivot point
on the right
View...
...................................................................................................................................................................................................
Position the horizontal tilt bracket against the front of the support bracket so that the two
upper bolt holes and the single lower bolt hole on the tilt bracket are aligned with the
bolts holes on the support bracket.
...................................................................................................................................................................................................
From the tilt bracket side, screw in the two upper and one lower M6 bolts through the
anchor holes on the tilt bracket and into the support bracket bolt holes.
...................................................................................................................................................................................................
Using a 10 mm ratchet wrench, tighten the two upper and one lower M6 retaining bolts.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
DRAFT
Repeat the above procedure for attaching the second horizontal tilt bracket to the
extension plate.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-80
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Once the tilt brackets have been attached to the support plate the 9764 Metro Dock(s) can
be attached to the tilt brackets. Continue with “Attach 9764 Metro Dock to brackets”
(p. 3-66).
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
E...................................................................................................................................................................................................
N D O F S T E P S
Attach combined horizontal/vertical tilt brackets
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach the combined horizontal/vertical tilt brackets to
the double support bracket.
...................................................................................................................................................................................................
Firstly combine the horizontal and vertical tilt brackets by unscrewing and removing the
two upper and two lower M6 bolts on the front of the horizontal tilt bracket.
...................................................................................................................................................................................................
Align the attachment holes on the vertical tilt bracket with the attachments holes on the
horizontal tilt bracket.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-81
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Important! Ensure the brackets are combined in the correct way based on the planned
horizontal and vertical tilt orientation of the equipment.
If...
Then...
left horizontal tilt and
downward vertical tilt is
required
the brackets should be attached with
the horizontal bracket pivot point on
the left and the vertical bracket pivot
point at the bottom
or
right horizontal tilt and
upward vertical tilt is required
Note: when positioning on a wall the
bracket assembly can be turned
through 1800 for right horizontal tilt
and upward vertical tilt
right horizontal tilt and
downward vertical tilt is
required
the brackets should be attached with
the horizontal bracket pivot point on
the right and the vertical bracket pivot
point at the bottom
or
left horizontal tilt and upward
vertical tilt is required
View...
Note: when positioning on a wall the
bracket assembly can be turned
through 1800 for left horizontal tilt and
upward vertical tilt
...................................................................................................................................................................................................
Insert the two upper and two lower bolts through the attachment holes on the vertical tilt
bracket and through the attachment holes on the horizontal tilt bracket.
Using a 10 mm ratchet wrench, tighten the two upper and two lower M6 retaining bolts so
that the brackets are securely attached.
DRAFT
Recommended screw torque; 7.0 N.m (62.0 lb.in).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-82
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Unscrew and remove the set of two upper M6 bolts and the one lower M6 bolt from both
the support bracket and the extension plate.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
...................................................................................................................................................................................................
Remove the two tilt angle positioning gauge bolts from the top and bottom of the
horizontal tilt bracket and allow the front part of the bracket to pivot away allowing easier
access to the bracket anchor holes.
Tilt angle
positioning gauge bolt
Bracket anchor holes
Bracket anchor holes
Tilt angle
positioning gauge bolt
...................................................................................................................................................................................................
Position the combined tilt bracket against the front of the support bracket so that the two
upper bolt holes and the single lower bolt hole on the tilt bracket are aligned with the
bolts holes on the support bracket.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-83
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
From the tilt bracket side, screw in the two upper and one lower M6 bolts through the
anchor holes on the tilt bracket and into the support bracket bolt holes.
...................................................................................................................................................................................................
Using a 10 mm ratchet wrench, tighten the two upper and one lower M6 retaining bolts.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Repeat the above procedure for attaching the second horizontal/vertical tilt bracket to the
extension plate.
...................................................................................................................................................................................................
10
Once the tilt brackets have been attached to the support plate the 9764 Metro Dock(s) can
be attached to the tilt brackets. Continue with “Attach 9764 Metro Dock to brackets”
(p. 3-66).
E...................................................................................................................................................................................................
N D O F S T E P S
Attach 9764 Metro Dock to brackets
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following procedure to attach a pair of 9764 Metro Dock's directly to the
support plate or to tilt brackets (attached to the support plate).
...................................................................................................................................................................................................
DRAFT
Before attaching each 9764 Metro Dock ensure that the Metro Dock spacer is fitted and in
place on both 9764 Metro Dock's.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-84
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
M5x12
countersunk screw
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Metro Dock
spacer
...................................................................................................................................................................................................
Unscrew and remove the set of two upper M6 bolts and the one lower M6 bolt from the
both sides (left and right) of the support plate or if tilt brackets are attached from each of
the tilt brackets.
9764 Metro Dock attachment
bolts on support plate
9764 Metro Dock attachment
bolts on tilt bracket
...................................................................................................................................................................................................
Position a 9764 Metro Dock against the front of the bracket (support plate or tilt) so that
the two upper bolt holes and the single lower bolt hole on the 9764 Metro Dock are
aligned with the bolts holes on the bracket.
...................................................................................................................................................................................................
From the 9764 Metro Dock side, screw in the two M6 bolts back through the upper bolt
holes on the 9764 Metro Dock and into the upper bracket bolt holes.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-85
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
Note: Ensure the bolts are positioned at the upper (or lower) part of the elongated hole
for better contact area with the Metro Dock (the chamfered midsection of the
elongated hole is used for banding installation).
...................................................................................................................................................................................................
Move the 9764 Metro Dock metal slider to the “up” position as this allows easier access
to the lower attachment bolt hole:
1. insert supplied key into lock
2. turn the key to its hard stop position to unlock the slider
3. push the slider upwards and turn the key to its hard stop position. The slider is now
locked in the “up” position.
Slider moves upwards
DRAFT
Metro Dock Slider
(in down position)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-86
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
From the 9764 Metro Dock side, screw in the single M6 bolts back through the lower bolt
hole on the 9764 Metro Dock and into the lower bracket bolt hole.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Lower Metro Dock
attachment bolt
...................................................................................................................................................................................................
Using a 10 mm ratchet wrench, tighten the two upper and one lower M6 retaining bolts.
Recommended screw torque; 7.0 N.m (62.0 lb.in).
...................................................................................................................................................................................................
Finally move the 9764 Metro Dock metal slider to the “down” position:
1. turn the key to its hard stop position to unlock the slider. The slider will automatically
spring into the “down” position.
2. turn the key to its hard stop position. The slider is now locked in the “down” position
and the key can be removed from the lock.
...................................................................................................................................................................................................
Repeat the above procedure for attaching the second 9764 Metro Dock to the other side of
the support plate or, if tilt brackets are attached, to the second tilt bracket.
E...................................................................................................................................................................................................
N D O F S T E P S
Wall mount example (with tilt)
The following figure shows an example of a 9764 Metro Dock pair configuration (with
tilt brackets attached), mounted onto a wall or flat surface.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-87
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock installation
Procedure 3-6: Wall mount the 9764 Metro Dock in a pair
configuration
....................................................................................................................................................................................................................................
How to continue
DRAFT
After mounting the 9764 Metro Dock pair onto the double support bracket the cables need
to be connected. Continue with the, “9764 Metro Dock cabling” (p. 3-89) chapter.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-88
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Overview
....................................................................................................................................................................................................................................
9764 Metro Dock cabling
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Overview
Purpose
This section provides instructions for routing and connecting the following cables to the
9764 Metro Dock module:
•
•
Grounding cable
Ethernet cable
Note: For outdoor NAR installations, or where local regulations dictate, the facility and
power cables are required to be routed to the equipment within rigid-steel or liquid-tight
flexible metal conduit. As part of site preparation, the customer must provide the metal
conduit and associated fittings for cable routes and connecting conduit to the outdoor
equipment.
Contents
Procedure 3-7: 9764 Metro Dock ground cabling
3-90
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber optic
3-92
Procedure 3-9: 9764 Metro Dock Ethernet cabling - electrical
3-99
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-89
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-7: 9764 Metro Dock ground cabling
....................................................................................................................................................................................................................................
Procedure 3-7: 9764 Metro Dock ground cabling
Purpose
This topic describes the procedures to be followed when connecting the grounding cable
to the 9764 Metro Dock.
Important! The following must be observed:
•
This equipment must be externally grounded to an appropriate grounding system
using: Yellow/Green 10 mm2 insulated ground cable (required for International
markets) or 8 AWG ground cable (required for North America Regional markets).
Grounding cable can be ordered from Alcatel-Lucent or be locally supplied.
•
All grounding system material (cable, connectors, etc.) must be of high quality, that
resist deterioration and require little or no maintenance.
Installation of the equipment must comply with local and national electrical codes and
guidelines. If there is uncertainty that suitable grounding is available contact the
appropriate site preparation contact or electrical inspection authority.
•
Connect the ground cable
To attach the ground cable to the 9764 Metro Dock perform the following steps.
...................................................................................................................................................................................................
Route the ground cable from the site grounding system to the 9764 Metro Dock.
...................................................................................................................................................................................................
At the 9764 Metro Dock cut the ground cable to a proper length and strip the cable end to
expose approximately 20 mm (0.75 in).
...................................................................................................................................................................................................
Place a double hole cable lug (with a holes suitable for M6 screws) onto the end of the
cable. Using an appropriate crimping tool, crimp the lug onto the cable.
DRAFT
...................................................................................................................................................................................................
Clean the contact surface area of the cable lug and earthing point on the 9764 Metro Dock
and use antioxidant to avoid oxidation.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-90
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-7: 9764 Metro Dock ground cabling
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Place one washer (wave spring washer) on each terminal screw, align the grounding cable
lug holes with the earthing terminal holes on the 9764 Metro Dock, and secure the cable
to the grounding point using the terminal screws.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Bottom view
of Metro Dock
Grounding point
on Metro Dock
Green/Yellow
ground cable
...................................................................................................................................................................................................
Secure grounding cable to the wall/pole.
Important! The installation location (wall/pole) must be grounded in accordance with
local regulatory guidelines
...................................................................................................................................................................................................
Finally, crimp on a double cable lug at the other end of the ground cable and attach to the
main grounding system.
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-91
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber
optic
....................................................................................................................................................................................................................................
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber optic
Purpose
This topic describes the procedures to be followed when connecting the optical Ethernet
cable to the 9764 Metro Dock. The 9764 Metro Dock, may either be in a single
configuration, or daisy chained to a second 9764 Metro Dock.
Cabling ancillary items
The following cabling related ancillary items can be ordered from Alcatel-Lucent when
the backhaul infrastructure is configured for optical Ethernet:
•
SFP GBE 1000BaseLX SFP module (SM or MM). See “SFP modules” (p. 2-18).
•
Fiber Optic Ethernet cable with LC connector to optical SFP module at the 9764
Metro Dock module. See “Ethernet cable - Optical” (p. 2-19).
Install SFP transceiver module
WARNING
Laser hazard
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser radiation exposure.
Do not view directly into the laser beam with optical instruments such as a fiber
microscope because viewing of laser emission in excess of Class 1 limits significantly
increases the risk of eye damage.
Never look into the end of an exposed fiber or an open connector as long as the optical
source is switched on.
Ensure that the optical source is switched off before disconnecting optical fiber
connectors.
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges (ESD)
DRAFT
Follow the rules, outlined in the Safety chapter, see “Notices” (p. 1-7), for handling
modules containing semiconductor components.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-92
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber
optic
....................................................................................................................................................................................................................................
Before the optical Ethernet cable can be connected, the SFP port(s) must be equipped
with the appropriate optical SFP transceiver. For backhaul, this can be either
1000Base-SX multi mode or 1000Base-LX single mode, according to the network
specifications.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
To install an SFP transceiver module into the 9764 Metro Dock module SFP port:
...................................................................................................................................................................................................
Firstly, carry out the following to attach the ESD wrist strap:
1. Attach the ESD strap over your wrist so that is in contact with your bare skin.
2. Momentarily touch the ESD clip onto a bare (unpainted) metal spot so that any built
up static charge is dissipated.
3. Attach the ESD clip to the 9764 Metro Dock ground lug screw (the ground lug screw
can be unscrewed slightly for easier ESD clip attachment).
ESD clip attached
behind Metro Dock
grounding lug screw
ESD ground strap
...................................................................................................................................................................................................
In order to remove the 9764 Metro Dock protective plate, ensure the Metro Dock metal
slider is in the default “down” position. This allows easier access to all six of the plate
retention screws.
...................................................................................................................................................................................................
On the front of the protective plate unscrew and safely store the 6 x M4 plate retention
screws (Hex wrench size, 2.5 mm).
Carefully lift off the 9764 Metro Dock protective plate.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-93
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber
optic
....................................................................................................................................................................................................................................
6 x M4
screws
Metro Dock
protective plate
...................................................................................................................................................................................................
Remove the SFP transceiver module(s) from their protective packaging.
Important! Do not remove the SFP transceiver module dust plugs until directed to do
so later in the procedure.
...................................................................................................................................................................................................
Check the label on the SFP transceiver module bodies to verify that you have the correct
model for your network.
...................................................................................................................................................................................................
DRAFT
Insert SFP transceiver modules into SFP ports.
If...
Then...
You are connecting a single
cable from the backhaul system.
Align the backhaul optical SFP
transceiver module with the SFP port
labelled “BH 1” and insert the
module into the socket until you feel
the connector latch into place.
You are connecting a daisy
chain cable in addition to the
cable from the backhaul system.
Align the daisy chain optical SFP
transceiver module with the SFP port
labelled “BH 2” and insert the
module into the socket until you feel
the connector latch into place.
View
Attention: If the SFP module resists as you insert it, do not force it. Remove the
module, turn it over, and try reinserting.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-94
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber
optic
....................................................................................................................................................................................................................................
Push up and latch the SFP module locking bar into position to secure the SFP transceiver
module into the port.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
...................................................................................................................................................................................................
To check that the SFP transceiver module(s) are seated and latched properly, grasp each
SFP module and try to remove it without releasing the latch.
•
•
If the SFP module can be removed, reinsert it until the module is latched securely into
the socket.
If the SFP module cannot be removed, it is installed and seated properly.
E...................................................................................................................................................................................................
N D O F S T E P S
Connect the Ethernet cable
WARNING
Laser hazard
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser radiation exposure.
Do not view directly into the laser beam with optical instruments such as a fiber
microscope because viewing of laser emission in excess of Class 1 limits significantly
increases the risk of eye damage.
Never look into the end of an exposed fiber or an open connector as long as the optical
source is switched on.
Ensure that the optical source is switched off before disconnecting optical fiber
connectors.
To connect the optical Ethernet cable to the Alcatel-Lucent 9764 Metro Dock perform the
following steps:
...................................................................................................................................................................................................
Route the optical Ethernet cable coming from the backhaul system to the 9764 Metro
Dock. If daisy chaining to a second 9764 MCO also route optical Ethernet cable to this
MCO.
...................................................................................................................................................................................................
Unscrew and remove the rounded compression nut from the cable gland located on the
bottom of the 9764 Metro Dock casing, as shown in the following figure:
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-95
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber
optic
....................................................................................................................................................................................................................................
Compression
gland assembly
Compression
nut
...................................................................................................................................................................................................
Feed the compression gland assembly items onto the Ethernet cable (either single cable or
double cable).
If...
Then...
You are connecting a single
cable from the backhaul
system
Firstly remove the cable
clamp from the optical cable,
then in the following order,
place the rounded
compression nut, the double
slotted cable seal and the
strain relief onto the cable, as
shown.
You are connecting a daisy
chain cable in addition to the
cable from the backhaul
system
Firstly remove the cable
clamp from both the optical
cables, then in the following
order, place the rounded
compression nut, the double
slotted cable seal and the
strain relief onto both cables,
as shown.
View
Strain
relief
Cable
clamp
Cable
seal
Strain
relief
Cable
clamp
Compression
nut
Compression
nut
Cable
seal
...................................................................................................................................................................................................
Feed the Ethernet cables through the gland opening on the Metro Dock and then insert the
gland assembly into the gland housing.
DRAFT
Note: The gland assembly with cable may need to be turned slightly in order to fully
slide into the gland housing before the compression nut can be screwed on.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-96
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber
optic
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Replace the cable clamp onto the optical cable and within the 9764 Metro Dock casing,
carefully route cables to the SFP cage.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Remove dust plugs from the optical cable LC connectors and the SFP transceiver modules
and immediately insert the optical cable LC connectors into the SFP transceiver modules.
Ethernet cable
connection point
(SFP Module)
SFP cage
Ethernet cable
entry point
(Cable gland)
...................................................................................................................................................................................................
Screw the rounded compression nut back onto the main body of the gland. Use an
adjustable or open-end wrench to tighten the compression nut
Important! It is recommended that the compression nut is torqued to 2.5 N.m (22.1
lb.in) in order to create a watertight seal and avoid a potential loose connection.
...................................................................................................................................................................................................
Replace and reattach the 9764 Metro Dock protective plate via the six plate retention
screws.
Important! Ensure the plate gasket is seated correctly in the groove on the underside
of the plate. Tighten the six plate retention screws in the sequence shown.
Recommended torque, 2.3 N.m (20.4 lb.in).
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-97
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-8: 9764 Metro Dock Ethernet cabling - fiber
optic
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Finally, secure the Ethernet cable to the wall/pole.
Important! When securing cables ensure the following to avoid cable damage:
•
•
•
Secure cables with tie wraps. Use additional tie wraps wherever necessary for
neatness
All cables should be run parallel with no twisting or tangled cables
Avoid excessive tension on the cable.
E...................................................................................................................................................................................................
N D O F S T E P S
How to continue
DRAFT
After the grounding and Ethernet cable connections are completed:
If...
Then...
The 9764 MCO module is to be installed
at a later time
continue with Procedure 3-10: “Final installation
activities and checks” (p. 3-112).
A 9764 MCO Wi-Fi AP module is to be
installed along with the 9764 MCO
module immediately after Metro Dock
installation
continue with Appendix B, “Installation of the 9764
MCO Wi-Fi AP”
The 9764 MCO module is to be installed
immediately after Metro Dock
installation
continue with Chapter 4, “Installation of the 9764
MCO module” before installing the 9764 MCO
module.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-98
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
Procedure 3-9: 9764 Metro Dock Ethernet cabling - electrical
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Purpose
This topic provides the following procedures associated with connecting electrical
Ethernet cable to the 9764 Metro Dock:
•
•
•
SFP transceiver module installation.
Optional internal surge arrestor module installation.
Connection electrical backhaul Ethernet cable.
Cabling ancillary items
The following Ethernet cabling related ancillary items are required when the backhaul
infrastructure is configured for electrical Ethernet:
•
10/100/1000BaseT Electrical SFP module. See “SFP modules” (p. 2-18).
•
Electrical Ethernet cable with RJ45 connector to electrical SFP module at the 9764
Metro Dock module. See “Ethernet cable - Electrical” (p. 2-19).
Optional Ethernet surge arrestor (either external or internal)
•
Can be installed if additional surge protection is required.
Install SFP transceiver module
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges (ESD)
Follow the rules, outlined in the Safety chapter, see “Notices” (p. 1-7), for handling
modules containing semiconductor components.
To install SFP transceiver modules into the 9764 Metro Dock module SFP ports:
...................................................................................................................................................................................................
Firstly, carry out the following to attach the ESD wrist strap:
1. Attach the ESD strap over your wrist so that is in contact with your bare skin.
2. Momentarily touch the ESD clip onto a bare (unpainted) metal spot so that any built
up static charge is dissipated.
3. Attach the ESD clip to the 9764 Metro Dock ground lug screw (the ground lug screw
can be unscrewed slightly for easier ESD clip attachment).
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-99
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
ESD clip attached
behind Metro Dock
grounding lug screw
ESD ground strap
...................................................................................................................................................................................................
Firstly ensure the Metro Dock metal slider is in the default “down” position as this allows
easier access to all six of the Metro Dock protective plate retention screws.
...................................................................................................................................................................................................
On the front of the protective plate unscrew the captive 6 x M4 plate retention screws
(Hex wrench size, 2.5 mm).
Carefully lift off the 9764 Metro Dock protective plate.
6 x M4
screws
Metro Dock
protective plate
...................................................................................................................................................................................................
Remove the SFP transceiver module(s) from the protective packaging.
...................................................................................................................................................................................................
DRAFT
Check the label on the SFP transceiver module body to verify that you have the correct
model for your network.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-100
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Insert SFP transceiver modules into SFP ports.
If...
Then...
You are connecting a single
cable from the backhaul system.
Align the backhaul electrical SFP
transceiver module with the SFP port
labelled “BH 1” and insert the
module into the socket until you feel
the connector latch into place.
You are connecting a daisy
chain cable in addition to the
cable from the backhaul system.
Align the daisy chain optical SFP
transceiver module with the SFP port
labelled “BH 2” and insert the
module into the socket until you feel
the connector latch into place.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
View
Attention: If the SFP module resists as you insert it, do not force it. Remove the
module, turn it over, and try reinserting.
Push up and latch the SFP module locking bar into position to secure the SFP transceiver
module into the port.
...................................................................................................................................................................................................
To check that SFP modules are seated and latched properly, grasp the SFP module and try
to remove it without releasing the latch.
•
•
If the SFP module can be removed, reinsert it until the module is latched securely into
the socket.
If the SFP module cannot be removed, it is installed and seated properly.
...................................................................................................................................................................................................
How to continue.
If...
Then...
The internal surge arrestor module is to
be installed (available in Release
LR14.1.L)
continue onto, “Install optional internal surge
arrestor” (p. 3-102)
No internal surge arrestor module is
required
continue onto, “Connect the backhaul Ethernet
cable” (p. 3-104)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-101
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
Install optional internal surge arrestor
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges (ESD)
Follow the rules, outlined in the Safety chapter, see “Notices” (p. 1-7), for handling
modules containing semiconductor components.
Follow these steps in order to install and cable the optional internal surge arrestor module
into the 9764 Metro Dock casing.
...................................................................................................................................................................................................
Within the 9764 Metro Dock casing remove the Metro Dock cable bar by unscrewing the
two retaining screws.
Cable bar
Cable bar
screws
...................................................................................................................................................................................................
From the surge arrestor kit packaging obtain the internal surge arrestor module and the
three T-10 Torx fixing screws.
...................................................................................................................................................................................................
Align the three screw holes on the surge arrestor module with the three screw holes within
the 9764 Metro Dock casing and secure the module into place with the supplied T-10 Torx
screws.
DRAFT
Tip: The three T-10 Torx screws are small, therefore it is recommended to use a
magnetized Torx screwdriver.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-102
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Surge arrestor module
Surge arrestor module
retaining screw
(Torx T-10)
Surge arrestor module
retaining screw
(Torx T-10)
...................................................................................................................................................................................................
Finally, using the short Ethernet cable (CA-SAEC) from the kit, plug one RJ45 cable
connector into the RJ45 port on the surge arrestor module and the other RJ45 cable
connector into the SFP transceiver located in port “BH1”.
RJ45 connection at
surge arrestor module
Short electrical
ethernet cable
RJ45 connection
at SFP
...................................................................................................................................................................................................
Continue with the next procedure, “Connect the backhaul Ethernet cable” (p. 3-104)
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-103
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
Connect the backhaul Ethernet cable
Follow these step in order to connect the electrical Ethernet backhaul cable to the SFP
module in the 9764 Metro Dock or the optional internal surge arrestor module (if
installed).
...................................................................................................................................................................................................
Obtain, from the packaging, the Alcatel-Lucent electrical Ethernet cable. The RJ45
connector without connector cover should be used at the 9764 Metro Dock side.
Note: If an external surge arrestor is installed then use a short cable from the surge
arrestor to the 9764 Metro Dock.
...................................................................................................................................................................................................
For increased cable connection within the cable gland, expose a section of screen braid
(approximately 10 mm ) by cutting through the cable jacket. The exposed section should
measured from the leading edge of the RJ45 connector to the center of the exposed area.
If...
Cable connection is
directly to SFP
Then...
Exposed screen braid
approx. 10 mm (0.4 inches)
30 cm (+/- 5 mm)
11.8 inches (+/- 0.2 inches)
Cable connection is
to surge arrestor
module
Exposed screen braid
approx. 10 mm (0.4 inches)
14 cm (+/- 5 mm)
6 inches (+/- 0.2 inches)
...................................................................................................................................................................................................
DRAFT
Unscrew and remove the rounded compression nut from the cable gland located on the
bottom of the 9764 Metro Dock casing, as shown in the following figure:
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-104
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Compression
gland assembly
Compression
nut
...................................................................................................................................................................................................
Feed the compression gland assembly items onto the Ethernet cable (either single cable or
double cable).
If...
Then...
You are connecting a single
cable from the backhaul
system
In the following order place
the rounded compression nut,
the double slotted cable seal
and the strain relief onto the
cable, as shown.
View
Strain relief
Cable
seal
Compression
nut
You are connecting a daisy
chain cable in addition to the
cable from the backhaul
system
Firstly remove the cable
clamp from the optical cable,
then in the following order,
place the rounded
compression nut, the double
slotted cable seal and the
strain relief onto both cables,
as shown.
Fibre cable
clamp
...................................................................................................................................................................................................
Pull the cable through the gland assembly parts until a connection is made between the
exposed cable screen braid and the gland contact springs.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-105
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
Contact springs
Cable gland
Contact springs
Ethernet cable
...................................................................................................................................................................................................
Feed the Ethernet cable(s) through the gland opening on the Metro Dock and loosely
insert the gland assembly into the gland housing.
Note: The gland assembly with cable may need to be turned slightly in order to fully
slide into the gland housing before the compression nut can be screwed on.
...................................................................................................................................................................................................
Within the 9764 Metro Dock casing:
DRAFT
•
route the electrical (backhaul) cable to either the SFP transceiver (“BH1”) or, if the
internal surge arrestor is installed, to the connector on the surge arrestor module.
Insert the Ethernet cable connector into the SFP transceiver or surge arrestor RJ45
port.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-106
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
•
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
if daisy chaining to a second 9764 MCO, route the optical (daisy chain) cable to the
SFP transceiver (“BH2”). Remove the dust plugs from the optical cable LC
connectors and the SFP transceiver module and immediately insert the LC connectors
into the SFP transceiver.
Optical daisy chain
Ethernet cable
connection point
(at SFP)
Optical daisy chain
Ethernet cable connection
(no surge arrestor module)
Optical daisy chain
Ethernet cable
connection point
(at SFP)
Optical daisy chain
Ethernet cable connection
(with surge arrestor module)
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-107
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Screw the rounded compression nut back onto the main body of the gland. Use an
adjustable or open-end wrench to tighten the compression nut.
Important! It is recommended that the compression nut is torqued to 2.5 N.m (22.1
lb.in) in order to create a watertight seal and avoid a potential loose connection.
...................................................................................................................................................................................................
Replace and reattach the 9764 Metro Dock protective plate via the six plate retention
screws.
Important! Ensure the plate gasket is seated correctly in the groove on the underside
of the plate. Tighten the six plate retention screws in the sequence shown.
Recommended torque, 2.3 N.m (20.4 lb.in).
...................................................................................................................................................................................................
10
Finally, secure the Ethernet cable to the wall/pole.
Important! When securing cables ensure the following to avoid cable damage:
•
•
•
Secure cables with tie wraps. Use additional tie wraps wherever necessary for
neatness
All cables should be run parallel with no twisting or tangled cables
Avoid excessive tension on the cable.
DRAFT
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-108
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
Mount and cable the external surge arrestor
Follow these steps to mount (either pole or wall) the optional external surge arrestor onto
the surge arrestor bracket and connect the Ethernet cables.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
...................................................................................................................................................................................................
On the surge arrestor, unscrew the lower weatherized strain relief connector and locking
nut from the surge arrestor.
...................................................................................................................................................................................................
Site the surge arrestor onto the bracket so that the lower threaded Ethernet connection
point is positioned through the arrestor mounting hole.
...................................................................................................................................................................................................
Screw the arrestor locking nut back onto the arrestor and tighten so that the arrestor is
securely attached to the bracket.
...................................................................................................................................................................................................
Carefully feed the end of Ethernet cable coming from the Customer Network Interface
Device through the previously unscrewed lower strain relief connector.
...................................................................................................................................................................................................
Plug the Ethernet cable RJ45 connector into the lower connector on the arrestor. Screw
the weatherized strain relief connector back onto the arrestor and tighten.
...................................................................................................................................................................................................
At the top of the arrestor, unscrew the upper weatherized strain relief connector from the
surge arrestor.
...................................................................................................................................................................................................
Carefully feed the end of Ethernet cable coming from the 9764 Metro Dock through the
upper strain relief connector.
...................................................................................................................................................................................................
Plug the Ethernet cable RJ45 connector into the upper connector on the arrestor. Screw
the weatherized strain relief connector back onto the arrestor and tighten.
...................................................................................................................................................................................................
Finally, secure the Ethernet cable to the wall/pole.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-109
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock cabling
Procedure 3-9: 9764 Metro Dock Ethernet cabling electrical
....................................................................................................................................................................................................................................
Important! When securing cables ensure the following to avoid cable damage:
•
•
•
Secure cables with tie wraps. Use additional tie wraps wherever necessary for
neatness
All cables should be run parallel with no twisting or tangled cables
Avoid excessive tension on the cable.
E...................................................................................................................................................................................................
N D O F S T E P S
How to continue
DRAFT
After the grounding and Ethernet cable connections are completed:
If...
Then...
The 9764 MCO module is to be installed
at a later time
continue with Procedure 3-10: “Final installation
activities and checks” (p. 3-112).
A 9764 MCO Wi-Fi AP module is to be
installed along with the 9764 MCO
module immediately after Metro Dock
installation
continue with Appendix B, “Installation of the 9764
MCO Wi-Fi AP”
The 9764 MCO module is to be installed
immediately after Metro Dock
installation
continue with Chapter 4, “Installation of the 9764
MCO module” before installing the 9764 MCO
module.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-110
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Overview
....................................................................................................................................................................................................................................
9764 Metro Dock post-installation
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock post-installation
Overview
Purpose
This section provides post-installation information and activities that should be carried
out after the Alcatel-Lucent 9764 Metro Dock has been installed.
Contents
Procedure 3-10: Final installation activities and checks
3-112
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-111
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock post-installation
Procedure 3-10: Final installation activities and checks
....................................................................................................................................................................................................................................
Procedure 3-10: Final installation activities and checks
Overview
This topic describes the final 9764 Metro Dock installation activities and checks to be
carried out if the 9764 MCO module is to be connected at a later time.
9764 Metro Dock plate and connection covers
If the 9764 MCO module is to be connected at a later time ensure that the following are in
place in order to protect the 9764 Metro Dock against the elements.
•
•
The 9764 Metro Dock is fitted with its weatherized plate
The 9764 MCO module connector is fitted with its gasket and blanking plate.
Metro Dock
weatherized plate
Metro Cell Module
connector gasket and
blanking plate
Final installation checks
Before leaving the installation site, check the following:
...................................................................................................................................................................................................
Check the overall installation. Verify that mounted equipment is secure and that no
unintentional mechanical alteration has occurred to either the equipment itself or the
installation infrastructure.
...................................................................................................................................................................................................
Ensure all the exterior connections are secure.
DRAFT
...................................................................................................................................................................................................
Ensure all cables are secured along their routes.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-112
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 3-10: Final installation activities and checks
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Finally, inspect the site for loose tools, materials, and parts. Remove all such loose tools,
materials, and parts.
DRAFT
Installation of the 9764 Metro Dock
9764 Metro Dock post-installation
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
3-113
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
DRAFT
Installation of the 9764 Metro Dock
Procedure 3-10: Final installation activities and checks
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
3-114
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
I4nstallation of the 9764
MCO module
Overview
Purpose
This chapter provides instructions for installing the Alcatel-Lucent 9764 Metro Cell
Outdoor module.
Contents
9764 MCO pre-installation
4-2
Pre-installation information
4-3
9764 MCO cabling
4-4
Procedure 4-1: Connect external RF antenna to the Alcatel-Lucent 9764 MCO
LTE 2x2W
4-5
Procedure 4-2: Connect GPS antenna
4-7
Procedure 4-3: 9764 MCO module ground cabling
4-18
Site power requirements (AC)
4-21
Site power requirements (DC)
4-24
Product power requirements
4-27
Procedure 4-4: Connect power cable
4-29
9764 MCO installation
4-40
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock
4-41
Procedure 4-6: Orient 9764 MCO module
4-48
9764 MCO post-installation
4-50
Procedure 4-7: Post installation activities
4-51
Procedure 4-8: Power on the 9764 MCO
4-52
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-1
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO pre-installation
Overview
....................................................................................................................................................................................................................................
9764 MCO pre-installation
Overview
Purpose
This section provides pre-installation information and lists tools and materials required to
install the Alcatel-Lucent 9764 Metro Cell Outdoor.
Contents
DRAFT
Pre-installation information
4-3
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-2
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Pre-installation information
....................................................................................................................................................................................................................................
Pre-installation information
DRAFT
Installation of the 9764 MCO module
9764 MCO pre-installation
Product delivery contents
The following items are supplied with the 9764 MCO module:
•
The 9764 MCO module
Variable parts and ancillary items
In addition to the standard delivered parts, the following variable and ancillary items are
available:
•
•
•
Molex 1212010001 AC power connector
Molex 1212060025 DC power connector
Power supply cable (100 m roll)
Installation tools required
The following tools may be used during installation:
•
•
Pliers
Screwdrivers (power and/or manual):
– Phillips (flat blade)
– Torx (T-25 and T-40)
•
Assorted cable ties
Wi-Fi AP installation
If you intend to attach an Alcatel-Lucent 9764 Metro Cell Outdoor Wi-Fi AP to the 9764
MCO module, attach it before you attach the 9764 MCO module to the 9764 Metro Dock.
For instructions, refer to Appendix B, “Installation of the 9764 MCO Wi-Fi AP”
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-3
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Overview
....................................................................................................................................................................................................................................
9764 MCO cabling
Overview
Purpose
This section provides instructions for routing and connecting the following cables to the
Alcatel-Lucent 9764 Metro Cell Outdoor module:
•
•
•
RF antenna cables for 9764 MCO V1.1 B2 LTE 2x2W model
GPS antenna cable
Ground cable
•
Power cable
The Alcatel-Lucent 9764 MCO LTE 2x1W and Alcatel-Lucent 9764 Metro Cell
Outdoor LTE 2x2W have AC and DC powered variants. You must ensure that you
follow the correct power requirements and cabling procedure for the variant you have.
Note: For outdoor NAR installations, or where local regulations dictate, the facility and
power cables are required to be routed to the equipment within rigid metal conduit (RMC)
or liquid-tight flexible metal (LTFMC) conduit. As part of site preparation, the customer
must provide the metal conduit and associated fittings for cable routes and connecting
conduit to the outdoor equipment.
Alternatively, an allowable outdoor armored cable described in the National Electrical
Code and Canadian Electrical Code, Part I, may be used without a conduit.
Cable types that may be used without a conduit include:
•
Type MC cable, such as Hybriflex cable
•
Outdoor tray cable Type TC-ER
DRAFT
Contents
Procedure 4-1: Connect external RF antenna to the Alcatel-Lucent 9764 MCO
LTE 2x2W
4-5
Procedure 4-2: Connect GPS antenna
4-7
Procedure 4-3: 9764 MCO module ground cabling
4-18
Site power requirements (AC)
4-21
Site power requirements (DC)
4-24
Product power requirements
4-27
Procedure 4-4: Connect power cable
4-29
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-4
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-1: Connect external RF antenna to the
Alcatel-Lucent 9764 MCO LTE 2x2W
....................................................................................................................................................................................................................................
Procedure 4-1: Connect external RF antenna to the
Alcatel-Lucent 9764 MCO LTE 2x2W
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Purpose
This procedure describes how to connect the external duplex RF antenna to an
Alcatel-Lucent 9764 MCO LTE 2x2W module.
Procedure
To connect the RF cables:
...................................................................................................................................................................................................
Refer to the RF antenna mounting instructions included with the RF antenna kit for the
steps to mount the antenna.
...................................................................................................................................................................................................
Locate the external RF antenna connectors (RX/TX) at the top of the heat sink side of the
9764 MCO module and remove the protective caps if present.
QN - Quick N
RX/TX antenna
...................................................................................................................................................................................................
Connect the external RF antenna adapter cables to the corresponding QN connectors on
the back of the 9764 MCO module.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-5
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-1: Connect external RF antenna to the
Alcatel-Lucent 9764 MCO LTE 2x2W
....................................................................................................................................................................................................................................
DRAFT
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-6
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
Procedure 4-2: Connect GPS antenna
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Purpose
'For an MCO with 2 GPS antenna connectors, use this procedure to connect an external
GPS antenna cable to the 9764 MCO.
MCOs with 2 GPS antenna connectors are supplied with an internal GPS antenna, and
with a bridging cable connected between the internal and external GPS antenna
connectors. For these MCOs, use this procedure to verify that the bridging cable is
correctly connected, or to connect the internal or external GPS antenna.
For a Alcatel-Lucent 9764 MCO LTE 2x2W, use this procedure to connect an external
antenna or switch between the internal and external antennas.
Note: The internal GPS antenna solution is not supported on the 9764 MCO V1.1 B7
LTE 2x1W, 9764 MCO V1.1 B2 LTE 2x1W and 9764 MCO V1.0 B25 LTE 2x1W
models.
External GPS antenna
The following figure shows the external GPS antenna and its mounting kit.
Figure 4-1 External GPS antenna configuration
External GPS antenna
GPS antenna
mounting kit
GPS antenna cable
GPS adapter cable
9764 MCO
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-7
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
Two different external GPS antennas are available. The 26 dB gain GPS antenna is used
when antenna cable loss is less than 10 dB at 1575 MHz. For antenna cable loss greater
than 10 dB at 1575 MHz, the 40 dB gain antenna must be used.
Before you begin
Ensure that the following tools are available:
•
•
•
•
Adjustable (crescent) wrenches
Torque ratchet (socket wrench)
Items such as crimping tools that are appropriate for attaching a new cable connector
to the GPS cable
Protective eye wear
Important! Do not mount the GPS antenna within 10 feet (3 m) of any transmit
antenna.
Safety statements
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges (ESD)
Follow the rules, outlined in the Safety chapter, see “Notices” (p. 1-7), for handling
modules containing semiconductor components.
These admonishments apply throughout this procedure. Refer to the Safety statements
chapter for general safety information.
Connect GPS antenna
...................................................................................................................................................................................................
DRAFT
If...
Then...
You are connecting an external GPS antenna
to an MCO with 1 GPS antenna connector
Follow procedure “Connect external GPS
antenna - B25, B7 or B2 MCO” (p. 4-9)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-8
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
If...
Then...
You are connecting an external GPS antenna
to an MCO with 2 GPS antenna connectors
Follow procedure “Connect external GPS
antenna to MCO - B3 MCO” (p. 4-12)
You are verifying or connecting the internal
GPS antenna to an MCO with 2 GPS antenna
connectors
Follow procedure “Connect internal GPS
antenna to MCO” (p. 4-14)
You are connecting a GPS antenna to the
Alcatel-Lucent 9764 MCO LTE 2x2W
Follow the procedure “Connect
internal/external GPS antenna to
Alcatel-Lucent 9764 MCO LTE 2x2W”
(p. 4-15)
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Note: The internal GPS antenna solution is not supported on the 9764 MCO V1.1 B7
LTE 2x1W, 9764 MCO V1.1 B2 LTE 2x1W and 9764 MCO V1.0 B25 LTE 2x1W
models.
E...................................................................................................................................................................................................
N D O F S T E P S
Connect external GPS antenna - B25, B7 or B2 MCO
...................................................................................................................................................................................................
Refer to the GPS antenna mounting instructions included with the GPS antenna kit for the
steps to mount the antenna.
...................................................................................................................................................................................................
Locate the GPS antenna connection on the back of the 9764 MCO module and remove
the protective cap if one is present.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-9
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
Figure 4-2 External GPS antenna connector
Connector for optional
external GPS antenna
...................................................................................................................................................................................................
Connect the GPS adapter cable by pushing the adapter cable connector onto the 9764
MCO module QMA-type connector until it clicks into place.
DRAFT
Figure 4-3 GPS antenna connection
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-10
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Apply weatherproof tape to the cable connectors as follows (see figure below for tape
placement):
•
•
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
For B25 MCO, B2 MCO and B2/B25 MCO, apply one layer of new weatherproof
tape to the cable connections.
For B3 MCO and B7 MCO, apply linerless rubber splicing tape first to the cable
connections, then cover with vinyl electrical tape (vinyl tape over rubber tape).
Figure 4-4 Weatherproof tape placement for external GPS antenna
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-11
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
Connect external GPS antenna to MCO - B3 MCO
...................................................................................................................................................................................................
Refer to the GPS antenna mounting instructions included with the GPS antenna kit for the
steps to mount the antenna.
...................................................................................................................................................................................................
Locate the internal and external GPS antenna connectors, that are on the top part of the
heatsink side of the 9764 MCO module.
Figure 4-5 Internal and external GPS antenna connectors
External GPS
antenna
connector
Internal GPS
antenna
connector
...................................................................................................................................................................................................
Disconnect and remove the bridging cable that connects the two internal and external
GPS antenna connectors.
...................................................................................................................................................................................................
Place a protective cap on the right hand QMA-type connector (looking at the 9764 MCO
module from the heatsink side).
...................................................................................................................................................................................................
DRAFT
Connect the external GPS adapter cable (coming from the external GPS antenna) to the
external GPS connector (left hand QMA-type connector when looking at the 9764 MCO
module from the heatsink side), by pushing the adapter cable connector onto the 9764
MCO module QMA-type connector until it clicks into place.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-12
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
Figure 4-6 GPS antenna connection
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
...................................................................................................................................................................................................
Apply weatherproof tape to the cable connectors as follows (see figure below for tape
placement):
•
•
For B25 MCO, B2 MCO and B2/B25 MCO, apply one layer of weatherproof tape to
the cable connections.
For B3 MCO and B7 MCO, apply linerless rubber splicing tape first to the cable
connections, then cover with vinyl electrical tape (vinyl tape over rubber tape).
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-13
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
Figure 4-7 Weatherproof tape placement for external GPS antenna
E...................................................................................................................................................................................................
N D O F S T E P S
Connect internal GPS antenna to MCO
Note: The internal GPS antenna solution is not supported on the 9764 MCO V1.1 B7
LTE 2x1W, 9764 MCO V1.1 B2 LTE 2x1W and 9764 MCO V1.0 B25 LTE 2x1W
models.
...................................................................................................................................................................................................
DRAFT
Verify that a bridge cable is connected to both GPS connectors as shown in the following
figure:
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-14
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
Figure 4-8 Bridge cable between external and internal GPS antenna connectors
External GPS
connector
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Internal GPS
connector
...................................................................................................................................................................................................
If a bridge cable is not connected to the GPS connectors, then connect a bridge cable to
both GPS connectors by pushing the bridge cable connector onto each 9764 MCO module
QMA-type connector until it clicks into place.
E...................................................................................................................................................................................................
N D O F S T E P S
Connect internal/external GPS antenna to Alcatel-Lucent 9764 MCO LTE 2x2W
...................................................................................................................................................................................................
Refer to the GPS antenna mounting instructions included with the GPS antenna kit for the
steps to mount the antenna.
...................................................................................................................................................................................................
Locate the GPS antenna connector on the back of the 9764 MCO module.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-15
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
Figure 4-9 Internal/external GPS antenna connector
QMA - Quick SMA
GPS antenna switch
...................................................................................................................................................................................................
The internal GPS antenna is by default connected. If an external GPS antenna is needed,
connect the external GPS adapter cable (coming from the external GPS antenna) to the
QMA GPS antenna switch connector, by pushing the adapter cable connector onto the
9764 MCO module QMA-type connector until it clicks into place.
...................................................................................................................................................................................................
DRAFT
In case an external GPS is used, apply weatherproof tape to the cable connectors as
follows (see figure below for tape placement):
•
For B25 MCO, B2 MCO and B2/B25 MCO, apply one layer of weatherproof tape to
the cable connections.
•
For B3 MCO and B7 MCO, apply linerless rubber splicing tape first to the cable
connections, then cover with vinyl electrical tape (vinyl tape over rubber tape).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-16
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-2: Connect GPS antenna
....................................................................................................................................................................................................................................
Figure 4-10 Weatherproof tape placement for external GPS antenna
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-17
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-3: 9764 MCO module ground cabling
....................................................................................................................................................................................................................................
Procedure 4-3: 9764 MCO module ground cabling
Purpose
This topic describes the procedures to be followed for grounding the 9764 MCO module.
Note:
•
•
Grounding of the 9764 MCO module is carried out via bonding from the 9764
Metro Dock module using the ground cable and materials (screws and washers)
contained in the Basic Installation Kit.
Grounding of the equipment must comply with local and national electrical codes
and guidelines. If there is uncertainty that suitable grounding is available contact
the appropriate site preparation personnel or electrical inspection authority.
Connect the ground cable
To carry out grounding of the 9764 MCO module from the 9764 Metro Dock module
perform the following steps.
...................................................................................................................................................................................................
Ensure that the power is off before proceeding with the ground cable connection.
...................................................................................................................................................................................................
Acquire the short 4mm2 (12 AWG) grounding cable, M6 terminal screw and M6 washers
from the basic installation kit.
...................................................................................................................................................................................................
Clean the contact surface area of the M6 lug ring at one of the short ground cable and
grounding point on the 9764 Metro Dock. Use antioxidant to avoid oxidation.
...................................................................................................................................................................................................
Thread the supplied washer then the lock washer onto the M6 terminal screw.
DRAFT
Align the cable lug ring with the 9764 Metro Dock single terminal hole and secure the
cable to the grounding point using the terminal screw.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-18
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-3: 9764 MCO module ground cabling
....................................................................................................................................................................................................................................
Single hole
ground point
(Metro Dock)
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
1 Hexagon Socket
screw M6x10
2 Washers M6
Ground cable
4 mm 2 (12 AWG)
Note: The short ground cable is green/yellow, however the cable may be black in some older installation kits.
...................................................................................................................................................................................................
Carry out the following:
Action:
Refer to:
Connect the power cable to the
9764 MCO module
Procedure 4-4: “Connect power cable” (p. 4-29)
Attach the 9764 MCO module to
the 9764 Metro Dock module
Procedure 4-5: “Attach 9764 MCO module to 9764 Metro
Dock” (p. 4-41)
...................................................................................................................................................................................................
Finally, from the underside of the 9764 MCO module secure the ground cable connector
onto the cable connector tab on the 9764 MCO module.
Ground cable
connection on
Metro Dock
Faston tab (M5)
connector on
MCO Module
Ground cable
connection on
MCO Module
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-19
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-3: 9764 MCO module ground cabling
....................................................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-20
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Site power requirements (AC)
....................................................................................................................................................................................................................................
Site power requirements (AC)
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Purpose
This section describes the power and grounding requirements that must be considered
when planning site facilities for Alcatel-Lucent installed equipment and products.
General requirements
All power and grounding system wiring, short-circuit (over-current) protection and surge
protection devices must be installed by the appropriately licensed personnel. Installation
must be performed in accordance with national and local electrical codes, for example:
•
In the United States:
National Electrical Code, NFPA 70
•
In Canada:
Canadian Electrical Code, part I, CSA C22.1
•
In other countries:
International Electrotechnical Commission (IEC) 60364, parts 1 through 7
In addition, adherence to all additional requirements mandated by the “country of use” is
the customer's responsibility.
The appropriate power supply ground connections and site equipment ground connections
must be in place before commercial AC power service can be connected to the equipment
installed at the site.
Customer AC power supply
The equipment installed on site must be supported with a customer supplied AC power
service. The AC connection point should be easily accessible by the service team and be
marked as the disconnect device of the equipment.
Note:
•
The service board (or load center), circuit breakers and surge protectors devices
are not supplied with the product. They must be ordered and installed as part of
site preparation by the customer.
•
All wiring (including grounding) and over-current protection must be installed at
the service panel by suitably trained and licensed personnel and in accordance
with the national and local electrical codes.
•
An appropriate earth ground connection is required before commercial power
service can be connected to any equipment at the site.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-21
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
In the United States and Canada, the branch circuit breaker shall be installed in
accordance with the National Electrical Code, or the Canadian Electrical Code, Part I.
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Site power requirements (AC)
....................................................................................................................................................................................................................................
The branch circuit breaker should always be situated upstream of the equipment and must
be a double pole 20A Type C disconnect device.
Circuit breaker
(double pole Type C)
9764
Metro Cell
Outdoor
Power cable 3G1.5mm 2
9764
Metro Cell
Outdoor
Power cable 3G1.5mm 2
20A
Main AC power
20A
Circuit breaker
(double pole Type C)
Line surge protection
A surge protection device is not supplied with the product. It must be ordered and
installed as part of site preparation by the customer.
The equipment can be connected to an AC mains distribution system classified as CAT II
(equipment dedicated for connection to the mains distributed within a building). If the
category of the AC mains is higher than CAT II (III or IV), then upstream surge protection
must be installed by the customer to reduce the voltage range of transients in accordance
with CAT II.
Power source
Over-voltage category
Equipment connected to building mains
CAT II
Equipment connected directly to low voltage mains
CAT III or CAT IV
The installation wiring for all outdoor AC units must be provided with a Listed/Approved
surge protection device. In the United States and Canada the installation must be in
accordance with the National Electrical Code or the Canadian Electrical Code, Part I.
Power junction box
For outdoor installations, in countries where local regulations dictate, a customer-supplied
power junction box, or a mating plug and receptacle, may need to be installed as part of
site preparation. As part of site preparation, the customer must provide the appropriate
junction box and associated fittings.
DRAFT
In the United States and Canada, outdoor cord pendants, if used, shall comply with NEC
Article 400 or Canadian Electrical Code, Part I Rule 4-012
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-22
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Site power requirements (AC)
....................................................................................................................................................................................................................................
Power connector at
the Metro Cell Outdoor
9764
Metro Cell
Outdoor
Power
junction box
Power cable
3G1.5mm
Site power
outlet
Power cable
Panel
board
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Mains
supply
Locally supplied
Conduit requirements
For outdoor installations, in countries where local regulations dictate, the power cables
are required to be routed to the equipment within rigid metal conduit (RMC) or
liquid-tight flexible metal (LTFMC) conduit. As part of site preparation, the customer
must provide the metal conduit and associated fittings for cable routes and connecting
conduit to the outdoor equipment.
Alternatively, an allowable outdoor armored cable described in the National Electrical
Code and Canadian Electrical Code, Part I, may be used without a conduit.
Cable types that may be used without a conduit include:
•
•
Type MC cable, such as Hybriflex cable
Outdoor tray cable Type TC-ER
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-23
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Site power requirements (DC)
....................................................................................................................................................................................................................................
Site power requirements (DC)
Purpose
This section describes the power and grounding requirements that must be considered
when planning site facilities for Alcatel-Lucent installed equipment and products.
General requirements
All power and grounding system wiring, short-circuit (over-current) protection and surge
protection devices must be installed by the appropriately licensed personnel. Installation
must be performed in accordance with national and local electrical codes, for example:
•
In the United States:
United States National Fire Protection Association (NFPA) 70 and United States
National Electrical Code (NEC)
•
In Canada:
Canadian Electrical Code, part I, CSA C22.1
•
In other countries:
International Electrotechnical Commission (IEC) 60364, parts 1 through 7
In addition, adherence to all additional requirements mandated by the “country of use” is
the customer's responsibility.
The appropriate power supply ground connections and site equipment ground connections
must be in place before commercial AC power service can be connected to the equipment
installed at the site.
Customer DC power supply
The equipment installed on site must be supported with a customer supplied nominal
-48V DC power service. The DC connection point should be easily accessible by the
service team and be marked as the disconnect device of the equipment.
Note:
•
•
DRAFT
•
The service board (or load center), circuit breakers and surge protectors devices
are not supplied with the product. They must be ordered and installed as part of
site preparation by the customer.
All wiring (including grounding) and over-current protection must be installed at
the service panel by suitably trained and licensed personnel and in accordance
with the national and local electrical codes.
An appropriate earth ground connection is required before commercial power
service can be connected to any equipment at the site.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-24
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Site power requirements (DC)
....................................................................................................................................................................................................................................
The branch circuit breaker should always be situated upstream of the equipment and must
be a double pole 20A Type C disconnect device.
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Circuit breaker
(double pole Type C)
9764
Metro Cell
Outdoor
Power cable 3G1.5mm 2
9764
Metro Cell
Outdoor
Power cable 3G1.5mm 2
20A
Main DC power
(-48V)
20A
Circuit breaker
(double pole Type C)
Line surge protection
A surge protection device is not supplied with the product. It must be ordered and
installed as part of site preparation by the customer.
Power junction box
For outdoor installations, in countries where local regulations dictate, a customer supplied
power junction box may need to be installed as part of site preparation. As part of site
preparation, the customer must provide the appropriate junction box and associated
fittings.
Power connector at
the Metro Cell Outdoor
9764
Metro Cell
Outdoor
Power
junction box
Power cable
3G1.5mm
Site power
outlet
Power cable
Panel
board
Mains
supply
Locally supplied
In the United States and Canada, outdoor cord pendants, if used, shall comply with NEC
Article 400 or Canadian Electrical Code, Part I Rule 4-012.
Conduit requirements
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-25
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
For outdoor installations, in countries where local regulations dictate, the power cables
are required to be routed to the equipment within rigid metal conduit (RMC) or
liquid-tight flexible metal (LTFMC) conduit. As part of site preparation, the customer
must provide the metal conduit and associated fittings for cable routes and connecting
conduit to the outdoor equipment.
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Site power requirements (DC)
....................................................................................................................................................................................................................................
Alternatively, an allowable outdoor armored cable described in the National Electrical
Code and Canadian Electrical Code, Part I, may be used without a conduit.
Cable types that may be used without a conduit include:
DRAFT
•
•
Type MC cable, such as Hybriflex cable
Outdoor tray cable Type TC-ER
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-26
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Product power requirements
....................................................................................................................................................................................................................................
Product power requirements
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Product power data
The following table provides power related information applicable to the Alcatel-Lucent
9764 MCO LTE 2x1W and the Alcatel-Lucent 9764 MCO LTE 2x2W
Power supply
AC Electrical Rating
100V-110 V AC, 200-230 V AC,
single phase, 2 A, 50/60 Hz
DC Electrical Rating
-48 V DC, 3.5 A, powered from
SELV source
Earthing system
Supported earthing systems
TT or TN
Unsupported earthing systems
IT
Power consumption
Gigabit Ethernet backhaul (Without 9764 MCO Wi-Fi
AP module)
< 34W
Gigabit Ethernet backhaul (With 9764 MCO Wi-Fi AP
module)
< 42W
Power ancillary items
The following Alcatel-Lucent power related ancillary items must be used. Refer to the
9764 lightRadio Metro Cell Outdoor “Family” Model Offer Provisioning Guide,
BCR/IRC/APP/038681
Table 4-1
Power materials
Item
Description
Use
Power connector (AC)
AC power connector
Required for 9764 MCO module with AC
power (International markets)
Cable diameter 8 – 9mm
Conductor cross-section: 1.5 mm2
Approval according to EN
50525-3-21
Power connector (DC)
DC power connector
Required for 9764 MCO module with DC
power (International markets)
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-27
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Product power requirements
....................................................................................................................................................................................................................................
Table 4-1
Power materials
(continued)
Item
Description
Use
Power cable
Power cable IN/OUT 3G1,5mm²,
100m roll or multiples of 1m length
(as needed)
Required for 9764 MCO module
(International markets)
Power cable (AC)
Power cable pre-assembled with AC
power connector, various lengths
(2m. 4.5m, 9m, 12m)
Required for 9764 MCO module with AC
power (North America Regional markets)
Power cable (DC)
Power cable pre-assembled with DC
power connector, various lengths
(2m. 4.5m, 9m, 12m)
Required for 9764 MCO module with DC
power (North America Regional markets)
Power connection point
Power is supplied to the 9764 MCO module, the 9764 Metro Dock module and the
optional 9764 MCO Wi-Fi AP module via either an AC or DC connector on the reverse
side of the 9764 MCO module.
9764 MCO module
(reverse view)
DRAFT
Power connection
point
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-28
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
Procedure 4-4: Connect power cable
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Purpose
This topic describes the procedures to be followed when connecting the power cable to
the 9764 MCO module.
Connections
The following figure shows the connection interfaces of the 9764 MCO module:
Figure 4-11 connection interfaces
Power connector
Before you begin
You must connect the power cable to the 9764 MCO module before you attach the 9764
MCO module to the 9764 Metro Dock, otherwise you will not be able to access the AC
power connector on the 9764 MCO module.
Depending on whether your 9764 MCO requires AC or DC power, and whether you have
a pre-assembled power cord or you need to assemble the power cord, select the
appropriate procedure from the following table:
If...
Then follow this procedure
your MCO requires AC power and you
need to assemble the power cable
“Assemble AC power cable onto connector”
(p. 4-30)
your MCO requires AC power and you
need to use a pre-assembled power cord
“Connect AC power cord” (p. 4-33)
your MCO requires DC power and you
need to assemble the power cable
“Assemble DC power cable onto connector”
(p. 4-34)
your MCO requires DC power and you
need to use a pre-assembled power cord
“Connect DC power cord” (p. 4-38)
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-29
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
In the United States and Canada, outdoor cords, whether installed as cord pendants or
with mating plug/receptacles, shall comply with NEC Article 400 or Canadian Electrical
Code, Part I Rule 4-012.
Assemble AC power cable onto connector
DANGER
Electric-shock hazard
Since the 9764 MCO operates on 120-220 V AC, the risk of serious injury or death from
electrocution exists throughout this procedure.
Follow the first step of this procedure carefully and completely.
WARNING
Electric-shock hazard
The current to the unit must be limited by an external fuse or circuit breaker incorporated
in the fixed wiring. The fuse or circuit breaker can be used as a disconnect device to turn
off the power to the system.
Ensure that the system power is off and that power cables are safe to handle before you
proceed with this procedure.
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Use this procedure if you have a separate AC power connector and cable.
...................................................................................................................................................................................................
Ensure that the power that feeds the AC power cable to the 9764 MCO is OFF, and block
access so that no one can restore power to that cable during this procedure.
...................................................................................................................................................................................................
Cut the power cable to the required length.
...................................................................................................................................................................................................
DRAFT
Disassemble the cover assembly of the power connector. See the following figure:
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-30
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
Registration tab
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Cover
30 mm screw
with gasket
Terminals
Top view of connector
with cover removed
Nut
Side view of connector
...................................................................................................................................................................................................
Feed the cable through the cable opening in the cover of the power connector and out
through the bottom of the cover.
...................................................................................................................................................................................................
Strip the cable according to the dimensions in the figure below. Assuming an H12 ground
position, the longest wire is the ground wire.
Blue
30 m
(1.2
in)
8 m in)
(0.3
Green/yellow
Brown
30 m
m (1
.2 in
8m
(0.3 m
2 in
8 mm
(0.32 in)
40 mm (1.6 in)
...................................................................................................................................................................................................
Crimp the exposed cable conductor with 8 mm ferrules, as shown in the following figure:
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-31
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
Crimping lugs (ferrules)
...................................................................................................................................................................................................
Cut the exposed ends of the cable to the length of the pins in the connector, as shown in
the following figure:
Cut conductors
to length
4 mm (0.157 in)
4 mm (0.157 in)
4 mm (0.157 in)
...................................................................................................................................................................................................
Screw the wires into the terminal blocks to a torque of 0.4 Nm.
DRAFT
Attention: Ensure that you connect the Live, Neutral, and Ground wires to the correct
pins as shown in the following figure:
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-32
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
Registration
tab
Ground
Pin 1:
Brown, Live
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Pin 2:
Blue, Neutral
Top view of connector
with cover removed
...................................................................................................................................................................................................
Insert the connector assembly into the cover (with the correct ground position) and pull
the excess cable back out through the cable opening of the connector cover.
...................................................................................................................................................................................................
10
Ensure that the cable gasket is correctly seated, and tighten the nut to a torque of 1 Nm
(0.737 lb-ft).
...................................................................................................................................................................................................
11
Attach the gasket and insert the fixing screw.
...................................................................................................................................................................................................
12
Plug the AC power connector into the power connector on the bottom left of the 9764
MCO module.
...................................................................................................................................................................................................
13
Fix the AC power connector in position by tightening the screw on the AC power
connector. Using a screwdriver with a Phillips head, torque to 0.4 Nm (0.295 lb ft).
E...................................................................................................................................................................................................
N D O F S T E P S
Connect AC power cord
DANGER
Electric-shock hazard
Since the 9764 MCO operates on 120-220 V AC, the risk of serious injury or death from
electrocution exists throughout this procedure.
Follow the first step of this procedure carefully and completely.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-33
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
WARNING
Electric-shock hazard
The current to the unit must be limited by an external fuse or circuit breaker incorporated
in the fixed wiring. The fuse or circuit breaker can be used as a disconnect device to turn
off the power to the system.
Ensure that the system power is off and that power cables are safe to handle before you
proceed with this procedure.
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Use this procedure if you have a pre-assembled AC power cord.
...................................................................................................................................................................................................
Ensure that the power that feeds the AC power cable to the 9764 MCO is OFF, and block
access so that no one can restore power to that cable during this procedure.
...................................................................................................................................................................................................
Plug the AC power connector on the power cord into the power connector on the bottom
left of the 9764 MCO module.
...................................................................................................................................................................................................
Fix the AC power connector in position by tightening the screw on the AC power
connector. Using a screwdriver with a Phillips head, torque to 0.4 Nm (0.295 lb ft).
E...................................................................................................................................................................................................
N D O F S T E P S
Assemble DC power cable onto connector
DANGER
Electric-shock hazard
DRAFT
Since the 9764 MCO operates on DC power, the risk of serious injury or death from
electrocution exists throughout this procedure.
Follow the first step of this procedure carefully and completely.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-34
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
WARNING
Electric-shock hazard
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
The current to the unit must be limited by an external fuse or circuit breaker incorporated
in the fixed wiring. The fuse or circuit breaker can be used as a disconnect device to turn
off the power to the system.
Ensure that the system power is off and that power cables are safe to handle before you
proceed with this procedure.
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Use this procedure if you have a separate DC power connector and cable.
...................................................................................................................................................................................................
Ensure that the power that feeds the DC power cable to the 9764 MCO is OFF, and block
access so that no one can restore power to that cable during this procedure.
...................................................................................................................................................................................................
Cut the power cable to the required length.
...................................................................................................................................................................................................
Disassemble the cover assembly of the power connector. See the following figure:
32 mm screw
with gasket
Terminals
Top view of connector
with cover removed
Nut
Top view of connector
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-35
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Feed the cable through the cable opening in the cover of the power connector and out
through the bottom of the cover.
...................................................................................................................................................................................................
Strip the cable according to the dimensions in the figure below. Assuming an H12 ground
position, the longest wire is the ground wire.
Blue
22
(0
mm
.87
in)
8 m in)
Green/yellow
Brown
22 m
m (0
.87
8m
(0.3 m
2 in
in)
8 mm
(0.32 in)
36mm (1.4 in)
...................................................................................................................................................................................................
Crimp the exposed cable conductor with 8 mm ferrules, as shown in the following figure:
Crimping lugs (ferrules)
...................................................................................................................................................................................................
DRAFT
Cut the exposed ends of the cable to the length of the pins in the connector, as shown in
the following figure:
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-36
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
Cut conductors
to length
4 mm (0.157 in)
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
4 mm (0.157 in)
4 mm (0.157 in)
...................................................................................................................................................................................................
Screw the wires into the terminal blocks to a torque of 0.4 Nm.
Attention: Ensure that you connect the 0 V, -48 V, and Ground wires to the correct
pins as shown in the following figure:
Ground
Registration tab
Pin 2:
Brown, 0 V
Pin 1:
Blue, -48 V
Top view of connector
with cover removed
...................................................................................................................................................................................................
Insert the connector assembly into the cover (with the correct ground position) and pull
the excess cable back out through the cable opening of the connector cover.
...................................................................................................................................................................................................
10
Ensuring that the cable gasket is correctly seated, and tighten the nut to a torque of 1 Nm
(0.737 lb-ft).
...................................................................................................................................................................................................
Attach the gasket, aligning the cutout in the gasket for the ground terminal over the
ground terminal on the connector. Insert the fixing screw
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-37
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
11
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
Attention: If the cutout in the gasket is not aligned with the ground terminal on the
connector, you will not be able to assemble the connector.
...................................................................................................................................................................................................
12
Plug the DC power connector into the power connector on the bottom left of the 9764
MCO module.
...................................................................................................................................................................................................
13
Fix the DC power connector in position by tightening the screw on the DC power
connector. Using a screwdriver with a Phillips head, torque to 0.4 Nm (0.295 lb ft).
E...................................................................................................................................................................................................
N D O F S T E P S
Connect DC power cord
DANGER
Electric-shock hazard
Since the 9764 MCO operates on DC power, the risk of serious injury or death from
electrocution exists throughout this procedure.
Follow the first step of this procedure carefully and completely.
WARNING
Electric-shock hazard
The current to the unit must be limited by an external fuse or circuit breaker incorporated
in the fixed wiring. The fuse or circuit breaker can be used as a disconnect device to turn
off the power to the system.
Ensure that the system power is off and that power cables are safe to handle before you
proceed with this procedure.
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
DRAFT
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Use this procedure if you have a pre-assembled DC power cord.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-38
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-4: Connect power cable
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Ensure that the power that feeds the DC power cable to the 9764 MCO is OFF, and block
access so that no one can restore power to that cable during this procedure.
DRAFT
Installation of the 9764 MCO module
9764 MCO cabling
...................................................................................................................................................................................................
Plug the DC power connector on the power cord into the power connector on the bottom
left of the 9764 MCO module.
...................................................................................................................................................................................................
Fix the DC power connector in position by tightening the screw on the DC power
connector. Using a screwdriver with a Phillips head, torque to 0.4 Nm (0.295 lb ft).
E...................................................................................................................................................................................................
N D O F S T E P S
How to continue
After connection of the power cable has been completed, continue with procedure
Procedure 4-5: “Attach 9764 MCO module to 9764 Metro Dock” (p. 4-41).
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-39
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO installation
Overview
....................................................................................................................................................................................................................................
9764 MCO installation
Overview
Purpose
This section provides the installation instructions for mounting the Alcatel-Lucent 9764
Metro Cell Outdoor onto a 9764 Metro Dock.
DRAFT
Contents
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock
4-41
Procedure 4-6: Orient 9764 MCO module
4-48
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-40
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock
....................................................................................................................................................................................................................................
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock
DRAFT
Installation of the 9764 MCO module
9764 MCO installation
Purpose
This topic describes the procedures to attach the Alcatel-Lucent 9764 Metro Cell Outdoor
module to the 9764 Metro Dock.
Prerequisites
A site survey has been conducted and a location for the device has been selected that is
both central to the public space and elevated to maximize coverage.
Before installation begins, ensure that the following are in place:
•
•
Internet service is available for backhaul.
The 9764 Metro Dock has been installed and is in place.
•
•
•
•
The 9764 Metro Dock has been closed.
The power cable has been connected to the 9764 MCO module.
The key that was supplied with the 9764 Metro Dock is available.
The key extension tool is available.
Before you begin
Record the 18 digit serial number before mounting the 9764 MCO module.
Attention: Do not wear tinted glasses of any kind (for example, sunglasses or tinted
safety glasses) while performing this procedure, because they will reduce the clarity
of your vision.
Attach 9764 MCO module to 9764 Metro Dock
Perform the following steps to attach the 9764 MCO module to the 9764 Metro Dock:
...................................................................................................................................................................................................
Remove the cover from the blind mate connector on the 9764 Metro Dock by unscrewing
the two M3x6 Torx screws that hold it in position.
...................................................................................................................................................................................................
Lubricate the sealing gasket on the blind mate connector by wiping a small quantity of a
suitable lubricant, such as Silicone O-Ring grease or Vaseline, over the entire gasket. The
following figure shows the sealing gasket:
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-41
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO installation
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock
....................................................................................................................................................................................................................................
Gasket
...................................................................................................................................................................................................
Attach the 9764 MCO key to the key extension tool:
1. Remove the M4 screw from the key extension tool.
2. Position the key on the key extension tool and replace the screw so that the key is
securely clamped onto the extension tool.
View with key
and M4 screw
Key Extension Tool
(original variant)
Key Extension Tool
(new variant)
...................................................................................................................................................................................................
To attach the 9764 MCO module to the 9764 Metro Dock, the 9764 Metro Dock metal
slider must be in the “open” (“up”) position:
1. Insert the key into the 9764 Metro Dock lock.
2. Turn the key through an angle of approximately 90º to its hard stop position to unlock
the slider.
DRAFT
3. Push the slider upwards and turn the key through an angle of approximately 60º to its
hard stop position. The slider is now locked in the “open” (“up”) position.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-42
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock
....................................................................................................................................................................................................................................
Upper slot
60
DRAFT
Installation of the 9764 MCO module
9764 MCO installation
-7
Metro Dock Slider
OPEN
Open for MCO module attach
Slider in UP position
Key cam locked
(not fully 60 ) keeping slider in open position
Key cannot be removed
6mm
Slider up
Key Extension Tool
...................................................................................................................................................................................................
Position the 9764 MCO module in front of the 9764 Metro Dock. Ensure the three metal
lugs on the 9764 MCO module are in front of the holes on the 9764 Metro Dock.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-43
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO installation
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock
....................................................................................................................................................................................................................................
Lug
Lug
Lug
Align lugs to holes on
Metro Dock
Push MCO module onto
Metro Dock
...................................................................................................................................................................................................
Push the 9764 MCO module into the 9764 Metro Dock.
Important! Do not apply excessive or prolonged pressure when pushing the 9764
MCO module into the 9764 Metro Dock, otherwise the slider will not spring back to
the “closed” (“down”) position.
...................................................................................................................................................................................................
To free the slider and then lock the 9764 MCO module onto the 9764 Metro Dock:
DRAFT
1. Turn the key through an angle of approximately 60º to its hard stop position to free
the slider. The slider will automatically spring into the “down” position.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-44
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock
....................................................................................................................................................................................................................................
DRAFT
Installation of the 9764 MCO module
9764 MCO installation
FREE
MCO assembled (not shown) and in free position
Slider springs into down position *
Key cam free (0 )
* If the Slider does not automatically spring into
the down position, move the MCO slightly
sideways or outwards to release the Slider.
Additionally pulling down on the key extension
tool may also release the Slider.
Slider up
Outline of
9764 MCO module
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-45
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO installation
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock
....................................................................................................................................................................................................................................
If slider does not automatically spring into the “down” position, move the 9764 MCO
very slightly sideways or outwards (away from the 9764 Metro Dock) to release the
slider.
2. Turn the key through an angle of approximately 90º to its hard stop position. The
slider is now locked in the “closed” (“down”) position and the key can be removed
from the lock.
Remove
90
Lower slot
LOCKED
MCO assembled (not shown) and Locked
Slider in down position and Locked
Key cam (90 ) / Key removable
DRAFT
Outline of
9764 MCO module
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-46
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-5: Attach 9764 MCO module to 9764 Metro Dock
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Finally, remove the key from the key extension tool.
DRAFT
Installation of the 9764 MCO module
9764 MCO installation
Locking
mechanism
Key insertion tool
not present
E...................................................................................................................................................................................................
N D O F S T E P S
How to continue
After 9764 MCO module has been attached to the 9764 Metro Dock, continue with
procedure Procedure 4-6: “Orient 9764 MCO module ” (p. 4-48).
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-47
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO installation
Procedure 4-6: Orient 9764 MCO module
....................................................................................................................................................................................................................................
Procedure 4-6: Orient 9764 MCO module
Purpose
This topic describes the procedures to orient the Alcatel-Lucent 9764 Metro Cell Outdoor
module towards its target using tilt and/or azimuth brackets.
Prerequisites
Ensure that the following are in place:
•
•
•
The 9764 Metro Dock has been installed and is in place.
The 9764 MCO has been attached to the 9764 Metro Dock.
You have the equipment orientation plan.
Orient 9764 MCO module
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Perform the following steps to angle the 9764 MCO module towards its target:
...................................................................................................................................................................................................
Refer to the equipment orientation plan.
If...
Then...
If the 9764 Metro Dock is installed on either a
pole or a wall, and a tilt bracket has been used
1. Using the tilt angle positioning gauge,
adjust the 9764 Metro Dock tilt (+- 20°
up/down) to the desired angle.
DRAFT
2. Using a ratchet wrench, tighten all the tilt
positioning gauge bolts and the bracket
assembly hex bolts to fix the orientation of
the 9764 Metro Dock.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-48
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-6: Orient 9764 MCO module
....................................................................................................................................................................................................................................
If...
Then...
If the 9764 Metro Dock is installed on a wall,
and an azimuth bracket has been used
1. Using the azimuth angle positioning
gauge, adjust the 9764 Metro Dock
azimuth (+- 45° left/right) to the desired
orientation.
DRAFT
Installation of the 9764 MCO module
9764 MCO installation
2. Using a ratchet wrench, tighten all the
azimuth positioning gauge bolts and the
bracket assembly hex bolts to fix the
orientation of the 9764 Metro Dock.
If the 9764 Metro Dock is installed on a wall,
and both the tilt bracket the azimuth bracket
have been used
Perform both of the above procedures.
E...................................................................................................................................................................................................
N D O F S T E P S
How to continue
After 9764 MCO module has been attached to the 9764 Metro Dock, continue with
procedure Procedure 4-7: “Post installation activities” (p. 4-51).
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-49
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO post-installation
Overview
....................................................................................................................................................................................................................................
9764 MCO post-installation
Overview
Purpose
This section provides post-installation information and activities that should be carried
out after the Alcatel-Lucent 9764 Metro Cell Outdoor has been installed.
DRAFT
Contents
Procedure 4-7: Post installation activities
4-51
Procedure 4-8: Power on the 9764 MCO
4-52
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-50
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure 4-7: Post installation activities
....................................................................................................................................................................................................................................
Procedure 4-7: Post installation activities
DRAFT
Installation of the 9764 MCO module
9764 MCO post-installation
Final installation checks
Before leaving the installation site, check the following:
...................................................................................................................................................................................................
Secure all cables along their routes.
...................................................................................................................................................................................................
Verify that all the exterior conduit and cable connections are secure.
...................................................................................................................................................................................................
Inspect the site for loose tools, materials, and parts. Remove all such loose tools,
materials, and parts.
...................................................................................................................................................................................................
Continue with procedure Procedure 4-8: “Power on the 9764 MCO” (p. 4-52)
E...................................................................................................................................................................................................
N D O F S T E P S
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
4-51
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO module
9764 MCO post-installation
Procedure 4-8: Power on the 9764 MCO
....................................................................................................................................................................................................................................
Procedure 4-8: Power on the 9764 MCO
Purpose
This topic describes how to power on the 9764 MCO.
Troubleshooting
If any problems occur during power on, refer to the following document:
•
Alcatel-Lucent 9764 Metro Cell Outdoor LTE 2x1W and 2x2W Maintenance and
Troubleshooting
9YZ-04152-0057-REZZA (LR14.1.L)
9YZ-05817-0057-REZZA (LR13.3.L)
Power on the 9764 MCO
Perform the following step to power on the 9764 MCO:
...................................................................................................................................................................................................
Follow site-specific procedures to power on the 9764 MCO by applying power to the
power cable.
After one to three seconds, the LED illuminates steady red, followed by approximately 15
minutes of steady green, and then ceases to illuminate.
If the LED does not follow this pattern of illumination, refer to Appendix A, “LED State
Description” to troubleshoot the problem.
DRAFT
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
4-52
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
Appendix A: LED State
Description
Overview
Purpose
This chapter describes the LED status and descriptions for 9764 MCO LTE.
Contents
LED status for 9764 MCO LTE
A-2
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
A-1
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
LED State Description
LED status for 9764 MCO LTE
....................................................................................................................................................................................................................................
LED status for 9764 MCO LTE
Overview
This topic describes the LED status on the9764 MCO LTE 2x1W and 9764 MCO LTE
2x2W devices.
Location of LED
The following figure shows the location of the LED on the back of the 9764 MCO LTE
2x1W and 9764 MCO LTE 2x2W:
Figure A-1 Location of LED
LED
Hardware LED interpretation table
DRAFT
The following table describes the possible states for the single bi-color LED:
State
Description
LED
Power off
Power off
Initial state
Power on or Restart
ON (Red)
Software downloading during
system initialization
Software downloading
Blinking
(Green)
Failure
9764 MCO LTE start-up or operational failure
ON (Red)
9764 MCO LTE becomes
operational
9764 MCO LTE becoming operational
9764 MCO LTE is operational
9764 MCO LTE has been in stable operation for 15 minutes
OFF
ON (Green)
(Note: LED is
switched OFF
after 15 minutes
of stable
operation)
OFF
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
A-2
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
Appendix B: Installation of the
9764 MCO Wi-Fi AP
Overview
Purpose
This appendix provides instructions for attaching the Alcatel-Lucent 9764 Metro Cell
Outdoor Wi-Fi AP to the 9764 MCO module.
The 9764 MCO Wi-Fi AP is optional. If you do not have a 9764 MCO Wi-Fi AP, then do
not perform the procedures in this appendix.
Contents
Physical description
B-2
9764 MCO Wi-Fi AP pre-installation information
B-8
Procedure B-1: Remove 9764 MCO module from 9764 Metro Dock
B-9
Procedure B-2: Attach 9764 MCO Wi-Fi AP module to 9764 MCO module
B-19
LED state description - 9764 MCO Wi-Fi AP
B-25
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-1
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Physical description
....................................................................................................................................................................................................................................
Physical description
Product overview
The 9764 Metro Cell Outdoor Wi-Fi AP is housed in a weatherized enclosure containing
the following active components:
•
Integrated antennas supporting 2x2 MIMO.
This figure reflects the location of the 9764 MCO Wi-Fi AP module when attached to the
technology-specific module (9764 MCO WCDMA module or 9764 MCO LTE module)
of the Alcatel-Lucent 9764 Metro Cell Outdoor.
DRAFT
Figure B-1 9764 MCO Wi-Fi AP attached to 9764 MCO hardware variants
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-2
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Physical description
....................................................................................................................................................................................................................................
This figure reflects the available 9764 MCO Wi-Fi AP module models (9764 Metro Cell
Outdoor Wi-Fi AP V1.0 HG [high gain] and 9764 Metro Cell Outdoor Wi-Fi AP V1.0
MG [medium gain]).
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Figure B-2 9764 MCO Wi-Fi AP - closed housing
This figure reflects the major components of both the High-gain and Medium-gain
models of the 9764 MCO Wi-Fi AP.
Figure B-3 9764 MCO Wi-Fi AP - cutaway view
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-3
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Physical description
....................................................................................................................................................................................................................................
The physical dimensions of the 9764 MCO Wi-Fi AP module are:
Table B-1
9764 MCO Wi-Fi AP physical characteristics
Physical property
9764 MCO Wi-Fi AP V1.0
MG model
9764 MCO Wi-Fi AP V1.0
HG model
Dimension (Height x Width
x Depth)
5cm x 13cm x 7cm
9cm x 13cm x 7cm
Volume
0.5 liters
0.8 liters
Weight
0.35 kg
0.4 kg
Product base items and configurations
The 9764 MCO Wi-Fi AP module is a single, field-replaceable, unit that may be mounted
to many Alcatel-Lucent 9764 Metro Cell Outdoor variants.
Available models include:
•
9764 Metro Cell Outdoor Wi-Fi AP V1.0 HG (contains High-gain integrated
antennas)
•
9764 Metro Cell Outdoor Wi-Fi AP V1.0 MG (contains Medium-gain integrated
antennas)
The unit is shipped with 3 M3 10mm Torx screws (part number 1AD013170007) used to
secure the 9764 MCO Wi-Fi AP module to the 9764 MCO module.
Connection interfaces
DRAFT
The 9764 MCO Wi-Fi AP module has a single interface connector that plugs into the back
bottom of the technology-specific module (9764 MCO WCDMA module or 9764 MCO
LTE module) of the Alcatel-Lucent 9764 Metro Cell Outdoor, carrying both power and all
communication between the two components.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-4
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Physical description
....................................................................................................................................................................................................................................
This figure reflects the connection point on the back bottom of the technology-specific
module (Alcatel-Lucent 9764 Metro Cell Outdoor WCDMA or Alcatel-Lucent 9764
Metro Cell Outdoor LTE) of the Alcatel-Lucent 9764 Metro Cell Outdoor.
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Figure B-4 9764 MCO Wi-Fi AP connection point on 9764 MCO
This figure provides a cutaway side view of the 9764 MCO Wi-Fi AP module when
connected to the technology-specific module (9764 MCO WCDMA module or 9764
MCO LTE module) of the Alcatel-Lucent 9764 Metro Cell Outdoor.
Figure B-5 9764 MCO Wi-Fi AP connected to 9764 MCO (cutaway side view)
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-5
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Physical description
....................................................................................................................................................................................................................................
Antennas
The 9764 MCO Wi-Fi AP supports 2 integrated antennas optimized for 2x2 MIMO with
up to 2 spatial streams.
Two hardware models are available:
•
•
9764 MCO Wi-Fi AP V1.0 MG model with Medium-gain integrated antennas.
9764 MCO Wi-Fi AP V1.0 HG model with High-gain integrated antennas.
Status indicators
There is an external single bi-color LED (amber/green) on the upper side of the 9764
MCO Wi-Fi AP module housing (pointing up towards the 9764 MCO LTE/WCDMA
module radome).
Although external, this LED is not easily visible and is not used for post-installation
troubleshooting. During initial cell power-up, however, the installation technician may
observe the LED changes as the unit goes through its booting sequences. Once the cell is
in normal operation for 30 minutes, the LED will turn off automatically.
Refer to “LED state description - 9764 MCO Wi-Fi AP” (p. B-25) for details.
The 9764 MCO Wi-Fi AP is monitored/managed remotely at the Alcatel-Lucent 9772
Wi-Fi Service Controller.
Product labeling
To the top of the 9764 MCO Wi-Fi AP module will be affixed three labels:
1. A product label reflecting:
• Vendor name/Icon
• Customer ID
• Model name
• Part number
•
Lock / Unlock mode icon
Note: The “Unlock” icon applies only to units designated as R&D lab mode.
•
•
•
Serial number
MAC address
CLEI code (U.S. only)
•
DRAFT
Data matrix barcode (2D MicroPDF Symbol) for Part number, Serial number,
MAC address, and CLEI code (CLEI code is for U.S. only)
2. A regulatory label reflecting:
• Vendor name/Icon
•
Product name
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-6
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Physical description
....................................................................................................................................................................................................................................
•
•
•
Regulatory rules
Power input
Enclosure rating
DRAFT
Installation of the 9764 MCO Wi-Fi AP
•
Applicable regulatory and environmental certification logos (for example, CE and
WEEE recycling logos)
• Manufacturer name
3. (NAR only) An FCC label reflecting:
•
•
Vendor name/Icon
FCC ID
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-7
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
9764 MCO Wi-Fi AP pre-installation information
....................................................................................................................................................................................................................................
9764 MCO Wi-Fi AP pre-installation information
Introduction
Important! The 9764 Metro Cell Outdoor Wi-Fi AP cannot be attached to the 9764
MCO module when the 9764 MCO module is attached to the 9764 Metro Dock.
If the 9764 MCO module is already attached to the 9764 Metro Dock, then the 9764
MCO module must first be removed from the 9764 Metro Dock. Refer to Procedure
B-1: “Remove 9764 MCO module from 9764 Metro Dock” (p. B-9).
When installing a 9764 MCO module for the first time, if a 9764 MCO Wi-Fi AP is
also to be installed, then attach the 9764 MCO Wi-Fi AP module to the 9764 MCO
module before attaching the 9764 MCO module to the 9764 Metro Dock.
Product delivery contents
The following items are supplied with the 9764 MCO Wi-Fi AP:
•
•
The 9764 MCO Wi-Fi AP module
Three M3 10mm Torx screws (to secure the 9764 MCO Wi-Fi AP module to the 9764
MCO module).
Variable parts and ancillary items
In addition to the standard delivered parts, the following variable and ancillary items are
available:
•
There are no ancillary parts for the 9764 MCO Wi-Fi AP.
Installation tools required
DRAFT
The following tools may be used during installation:
•
•
Snips
Screwdrivers (power and/or manual):
– Phillips (flat blade)
– Torx (T10)
•
9764 Metro Dock key
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-8
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
....................................................................................................................................................................................................................................
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Purpose
This topic describes the procedure to remove the 9764 MCO module from the 9764 Metro
Dock if the 9764 MCO module has already been attached to the 9764 Metro Dock.
Prerequisites
Before installation begins, ensure the following are available:
•
The key that was supplied with the 9764 Metro Dock
•
•
Snips (to cut cable tie)
Phillips-head screwdriver (to loosen power cable screw)
DANGER
Electric-shock hazard
Risk of personal injury or death, property damage, and/or equipment damage.
Refer to the Safety chapter for all Dangers, Warnings, Cautions and Notices.
NOTICE
Service-disruption hazard
Following the procedure below will result in service disruption.
Notify the OMC administrator of a service outage before commencing.
Before you begin
Perform this procedure only if the 9764 MCO module has been installed on the 9764
Metro Dock.
Remove the 9764 MCO module
...................................................................................................................................................................................................
Shut off the power that feeds the power cable to the 9764 MCO.
...................................................................................................................................................................................................
Block access so that no one can restore power to that cable during the course of this
replacement procedure.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-9
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
....................................................................................................................................................................................................................................
Attention: Blocking access likely consists of not only putting a physical impediment
in the way, but also broadly circulating or broadcasting a warning about the hazard
and getting the cooperation of persons who have the authority to limit the access of
others.
...................................................................................................................................................................................................
If a cable tie will inhibit separating the 9764 MCO module from the 9764 Metro Dock,
snip the cable tie.
...................................................................................................................................................................................................
Perform this step only if:
•
you are replacing the 9764 MCO module, or
•
if there is an external GPS antenna connection and the GPS cable is too short,
prohibiting you from easily removing the MCO.
The 9764 MCO module could be deployed using either an external GPS antenna or the
internal GPS antenna. Follow the appropriate procedure below for type of 9764 MCO
module deployed and the GPS antenna configuration used, and note which type of GPS
antenna was used for reference when reattaching the 9764 MCO module.
If...
Then...
deployed with an
external GPS antenna on
the 2x1W MCO
disconnect the GPS adapter
cable by pulling it off of the
QMA-type connector. The
GPS antenna QMA connection
is located on the upper
backside of the 9764 MCO
module.
View
Tip: Unplugging the GPS
QMA connector needs very
little force. If the access
makes it difficult to unplug,
use a non-metallic screw
driver as a lever to gently
release the connector.
DRAFT
deployed using the
internal GPS antenna on
the 2x1W MCO
the GPS bridge cable, attached
to the QMA-type connectors
located on the top part of the
heatsink side of the 9764
MCO module, can remain in
place
GPS bridge cable
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-10
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
....................................................................................................................................................................................................................................
If...
Then...
deployed with an
external GPS antenna on
the 2x2W MCO
disconnect the GPS adapter
cable by pulling it off of the
QMA-type connector. The
GPS antenna QMA connection
is located half way down the
heat sink on the right hand
side of the 9764 MCO
module.
View
DRAFT
Installation of the 9764 MCO Wi-Fi AP
QMA - Quick SMA
GPS antenna switch
Tip: Unplugging the GPS
QMA connector needs very
little force. If the access
makes it difficult to unplug,
use a non-metallic screw
driver as a lever to gently
release the connector.
deployed using the
internal GPS antenna on
the 2x2W MCO
no action is needed.
...................................................................................................................................................................................................
Perform this step for the 9764 MCO LTE 2x2W MCOs only and only if:
•
•
you are replacing the 9764 MCO module, or
there is an attached RF antenna and the RF antenna cable is too short, prohibiting you
from easily removing the MCO.
For the 9764 MCO LTE 2x2W MCOs only: Disconnect the external RF antennas by
pulling them off of the QN connectors located at the top of the heat sink side of the 9764
MCO module.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-11
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
....................................................................................................................................................................................................................................
QN - Quick N
RX/TX antenna
...................................................................................................................................................................................................
Disconnect the ground cable.
DRAFT
The LTE 9764 MCO module utilizes a short ground cable to the 9764 Metro Dock. From
the underside of the 9764 MCO module unclip and disconnect the ground cable connector
from the ground cable connection tab on the 9764 MCO module.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-12
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
....................................................................................................................................................................................................................................
Figure B-6 9764 Metro Dock to LTE 9764 MCO module grounding cable
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Ground cable
connection on
Metro Dock
Faston tab (M5)
connector on
MCO Module
Ground cable
connection on
MCO Module
...................................................................................................................................................................................................
If the 9764 MCO configuration requires use of the key extension to reach the lock, then
attach the key to the key extension.
1. Remove the M4 screw from the key extension.
2. Insert the key.
3. Replace the screw so that the tool clamps firmly onto the key.
Figure B-7 Key extension
View with key
and M4 screw
Key Extension Tool
(original variant)
Key Extension Tool
(new variant)
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-13
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
To remove the 9764 MCO module from the 9764 Metro Dock, the 9764 Metro Dock
metal slider must be in the “open” (“up”) position:
1. Insert the key into the 9764 Metro Dock lock.
2. Turn the key through an angle of approximately 90° to its hard stop position to unlock
the slider.
Note: Keep a grip on the key extension tool, because with the slider in the “down”
position, the key can slip out of the lock and fall to the ground.
DRAFT
3. Push the extension tool upwards to move the slider up and turn the key through an
angle of approximately 60° to its hard stop position. The slider is now locked in the
“open” (“up”) position.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-14
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
....................................................................................................................................................................................................................................
Upper slot
60
DRAFT
Installation of the 9764 MCO Wi-Fi AP
-7
Metro Dock Slider
OPEN
Open for MCO module attach
Slider in UP position
Key cam locked
(not fully 60 ) keeping slider in open position
Key cannot be removed
6mm
Slider up
Key Extension Tool
The key and extension may remain in the lock while completing the subsequent hardware
replacement steps.
...................................................................................................................................................................................................
Pull the 9764 MCO module straight out of and clear from the 9764 Metro Dock.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-15
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
....................................................................................................................................................................................................................................
Figure B-8 Pull 9764 MCO module from Metro Dock
Pull MCO module out of
Metro Dock
...................................................................................................................................................................................................
10
On the bottom left of the 9764 MCO module, loosen the screw that locks the power line
connector into its mating connector in the 9764 MCO module.
Figure B-9 AC power line connector
Registration tab
Cover
30 mm screw
with gasket
Terminals
Top view of connector
with cover removed
Nut
DRAFT
Side view of connector
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-16
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
....................................................................................................................................................................................................................................
Figure B-10 DC power line connector
32 mm screw
with gasket
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Terminals
Top view of connector
with cover removed
Nut
Top view of connector
...................................................................................................................................................................................................
11
Pull the power cable plug straight out of its mating connector in the 9764 MCO module.
...................................................................................................................................................................................................
12
Important! If a Wi-Fi AP is attached to the 9764 MCO module, perform this step as
well as the following two steps only if the 9764 MCO module is being replaced;
otherwise skip to Step 14. If a Wi-Fi AP is not attached to the 9764 MCO module,
skip to Step 14.
Using a T10 Torx screwdriver, loosen the three M3 10mm Torx screws from the
attachment plate on the back of the 9764 MCO module and 9764 MCO Wi-Fi AP module.
Figure B-11 9764 MCO Wi-Fi AP module attached to 9764 MCO module
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-17
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Procedure B-1: Remove 9764 MCO module from 9764 Metro
Dock
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
13
Set the screws and the attachment plate aside (retain for later use).
...................................................................................................................................................................................................
14
Pull the 9764 MCO Wi-Fi AP module off of the 9764 MCO module and set the 9764
MCO Wi-Fi AP module aside.
...................................................................................................................................................................................................
15
Rest the 9764 MCO module gently against a secure, supportive, flat surface and block it
from falling.
E...................................................................................................................................................................................................
N D O F S T E P S
How to continue
DRAFT
Continue to Procedure B-2: “Attach 9764 MCO Wi-Fi AP module to 9764 MCO module”
(p. B-19).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-18
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure B-2: Attach 9764 MCO Wi-Fi AP module to 9764
MCO module
....................................................................................................................................................................................................................................
Procedure B-2: Attach 9764 MCO Wi-Fi AP module to 9764 MCO
module
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Purpose
This topic describes the procedures to attach the 9764 MCO Wi-Fi AP module to the 9764
MCO module.
Prerequisites
Before installation begins, ensure the following:
•
T10 Torx screwdriver (power and/or manual) is available.
•
•
Internet service is available.
The 9764 MCO module is not attached to the 9764 Metro Dock.
If removal is necessary, refer to procedure Procedure B-1: “Remove 9764 MCO
module from 9764 Metro Dock” (p. B-9).
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-19
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Procedure B-2: Attach 9764 MCO Wi-Fi AP module to 9764
MCO module
....................................................................................................................................................................................................................................
Attach 9764 MCO Wi-Fi AP module to 9764 MCO module
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges (ESD)
The following rules must be complied with when handling any module containing
semiconductor components:
•
•
•
•
•
Wear conductive or antistatic working clothes (for example, coat made of 100%
cotton).
Wear a grounded wrist strap.
Wear shoes with conductive soles on a conductive floor surface or conductive work
mat.
Leave the modules in their original packaging until ready for use.
•
Make sure there is no difference in potential between yourself, the workplace, and the
packaging before removing, unpacking, or packing a module.
Whenever handling ESD-sensitive components, do not touch any connection pins or
tracks.
Place modules removed from the equipment on a conductive surface.
•
•
Test or handle the module only with grounded tools on grounded equipment.
Handle defective modules exactly like new ones to avoid causing further damage.
•
Perform the following steps to attach the 9764 MCO Wi-Fi AP module to the 9764 MCO
module:
...................................................................................................................................................................................................
Remove the 9764 MCO Wi-Fi AP module from its packaging.
...................................................................................................................................................................................................
Using a T10 Torx screwdriver, remove the cover over the Wi-Fi AP connector on the
lower back of the 9764 MCO module by unscrewing the three screws.
DRAFT
The following figure shows the Wi-Fi AP connector cover:
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-20
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure B-2: Attach 9764 MCO Wi-Fi AP module to 9764
MCO module
....................................................................................................................................................................................................................................
Figure B-12 Wi-Fi AP connector cover on 9764 MCO module
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Cover over 9764 MCO Wi-Fi AP connector
Important! Ensure that the appropriate gasket surrounding the connector is in place
on the 9764 MCO module (as shown in Figure B-13, “Wi-Fi AP connector on 9764
MCO module” (p. B-21)).
Note: Retain the cover and the three (3) cover screws. Should the need arise to
remove but not replace the 9764 MCO Wi-Fi AP module in the future, the dummy
cover and its screws must be reattached to the 9764 MCO module.
...................................................................................................................................................................................................
Push the 9764 MCO Wi-Fi AP module onto the Wi-Fi AP connector.
Figure B-13 Wi-Fi AP connector on 9764 MCO module
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-21
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Procedure B-2: Attach 9764 MCO Wi-Fi AP module to 9764
MCO module
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Using a T10 Torx screwdriver and the three M3 10mm Torx screws shipped with the 9764
MCO Wi-Fi AP module, screw the attachment plate to the 9764 MCO module and to the
back of the 9764 MCO Wi-Fi AP module, and tighten all screws.
Torque screws to 0.6 Nm (0.443 lb ft).
The following figure shows the 9764 MCO Wi-Fi AP module attached to the 9764 MCO
module:
Figure B-14 9764 MCO Wi-Fi AP module attached to 9764 MCO module
E...................................................................................................................................................................................................
N D O F S T E P S
How to continue
Attach the 9764 MCO module to the 9764 Metro Dock module by following the
procedures in Chapter 4, “Installation of the 9764 MCO module”.
9764 MCO Wi-Fi AP integration overview
Integration refers to the entire process from hardware installation to “normal operation”.
9764 MCO Wi-Fi AP integration proceeds as follows:
1. Hardware is installed.
DRAFT
The 9764 MCO Wi-Fi AP module is physically installed on the 9764 MCO module,
and the 9764 MCO module is physically installed on the 9764 Metro Dock module
and all cabling completed.
2. Power is applied to the 9764 MCO (and by default, to the 9764 MCO Wi-Fi AP
module).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-22
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Procedure B-2: Attach 9764 MCO Wi-Fi AP module to 9764
MCO module
....................................................................................................................................................................................................................................
3. The switch on the 9764 MCO module contains a default configuration that connects
the 9764 MCO Wi-Fi AP port to the backhaul port (there are no 9764 MCO Wi-Fi AP
OAM parameters to be configured prior to initial power-up).
DRAFT
Installation of the 9764 MCO Wi-Fi AP
The switch will forward Wi-Fi packages as soon as the 9764 MCO module software
has booted and as soon as the 9764 MCO Wi-Fi AP software is running.
4. A connection between 9764 MCO Wi-Fi AP and Alcatel-Lucent 9772 Wi-Fi Service
Controller (9772 Wi-Fi SC) is automatically established.
5. The 9764 MCO Wi-Fi AP downloads the latest software version from the appropriate
file server (if applicable).
6. The 9764 MCO Wi-Fi AP is provisioned and configured via the 9772 Wi-Fi SC.
A 30-minute timer is started after the configuration is sent successfully from the 9772
Wi-Fi SC. During this 30 minutes, the LED on top of the 9764 MCO Wi-Fi AP
module illuminates and is visible through the narrow gap between the bottom of the
9764 MCO module and the top of the 9764 MCO Wi-Fi AP module.
For information on the 9772 Wi-Fi SC, refer to the documents listed in the following
table:
Refer to this document
At this location
For more information on
Alcatel-Lucent 9772 Wi-Fi
Service Controller V1.0 L
Hardware Installation,
3MN-01840-0001- RJZZA
(http://support.alcatellucent.com)
Instructions for installing the
9772 WiSC-L hardware and
accessing its management
interfaces.
Alcatel-Lucent 9764 and
9772 Metro Cell Outdoor
Wi-Fi AP and Wi-Fi Service
Controller, Release WA5.5,
System Reference Guide,
3MN-01840-0002-RKZZA
(http://support.alcatellucent.com)
Instructions for accessing
and using the web-based
graphic user interface (GUI)
to manage/administer the
9772 Wi-Fi Service
Controller and 9764 MCO
Wi-Fi Access Point
Alcatel-Lucent 9764 and
9772, Metro Cell Outdoor
Wi-Fi AP and Wi-Fi Service
Controller, Release WA 5.5,
CLI Reference Guide,
3MN-01840-0003-RKZZA
(http://support.alcatellucent.com)
Instructions for accessing
and using command line
interface (CLI) to
manage/administer the 9772
Wi-Fi Service Controller
and 9764 MCO Wi-Fi
Access Point.
7. The field technician may choose to observe the LED colors and blinking patterns to
ensure error-free boot-up and normal operation. Refer to “LED state description 9764 MCO Wi-Fi AP” (p. B-25) for details.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-23
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Procedure B-2: Attach 9764 MCO Wi-Fi AP module to 9764
MCO module
....................................................................................................................................................................................................................................
- If normal operation is achieved, then the LED is automatically turned off when the
30-minute timer expires.
- If there are problems, then the LED displays the applicable error color/pattern. Refer
to “LED state description - 9764 MCO Wi-Fi AP” (p. B-25) for details.
DRAFT
8. The field technician will make the first test call – provided all necessary core network
elements (NEs) are configured properly (for example, WLAN GW, AAA, etc.).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-24
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
LED state description - 9764 MCO Wi-Fi AP
....................................................................................................................................................................................................................................
LED state description - 9764 MCO Wi-Fi AP
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Overview
The 9764 MCO Wi-Fi AP module has a single external bi-color LED (red/green) on the
top of the module housing.
The LED illuminates with different colors and blinking patterns during boot-up, then is
automatically turned off after normal operation has been achieved and the 30-minute
timer expires. If there are problems, then the LED displays the applicable error
color/pattern.
Due to limited visibility requiring direct line-of-site between the 9764 MCO Wi-Fi AP
module and the 9764 MCO module, the LED is not intended for ongoing troubleshooting
after the unit has been successfully deployed. However, the field technician
installing/replacing the 9764 MCO Wi-Fi AP module may watch the LED during boot-up
if desired.
LED statuses during boot-up
Tip: In the following table, note that “Slow blinking” refers to an LED blink cycle of
2500 ms on, 2500 ms off; “Fast blinking” refers to an LED blink cycle of 500 ms on,
500 ms off.
After the 9764 MCO Wi-Fi AP hardware has been installed, upon power-up the LED
reflects 9764 MCO Wi-Fi AP statuses as follows:
Table B-2
9764 MCO Wi-Fi AP LEDs during boot-up
Installation /
commissioning
step
9764 MCO
Wi-Fi AP State
Red LED
segment
Green LED
segment
Combined LED
behavior
1. Power-up with
autotest
BOOTING
Solid On
Solid On
Solid On (appears
orange)
2. 9764 MCO Wi-Fi
AP tries to get
adopted by the 9772
Wi-Fi Service
Controller
ADOPTING
Slow blinking
Off
Slow red blinking
3. (optional) 9772
Wi-Fi Service
Controller pushes a
software upgrade
UPGRADING
Off
Slow blinking
Slow green blinking
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-25
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Installation of the 9764 MCO Wi-Fi AP
LED state description - 9764 MCO Wi-Fi AP
....................................................................................................................................................................................................................................
Table B-2
9764 MCO Wi-Fi AP LEDs during boot-up
(continued)
Installation /
commissioning
step
9764 MCO
Wi-Fi AP State
Red LED
segment
Green LED
segment
Combined LED
behavior
4. WLANs are
mapped to radios,
normal service
OPERATIONAL
Service on 5
GHz: Slow
blinking
Service on 2.4
GHz: Slow
blinking
With both radios
operating: slow orange
blinking
5. After 30 minutes
in the same state
HIDING
Off
Off
Off
(Note: the LED
timeout default
setting is 30
minutes, but is
configurable by the
Administrator to
any value from 15
to 1440 minutes.)
LED functionality during OPERATIONAL states
The 2 9764 MCO Wi-Fi AP radios are mapped to a color segment of the LED:
•
•
Radio 1 (2.4 GHz) maps to the GREEN segment.
Radio 2 (5 GHz) maps to the RED segment.
There are 2 factors that affect the LED segment that is associated with each radio:
•
If the radio is disabled (shutdown) or not by the administrator (this factor takes
precedence).
•
If a WLAN is mapped to the radio, making the radio usable.
If a radio has at least a WLAN mapped to it and it is enabled, then it is operational
(meaning, it will beacon and provide client service).
Tip: In the following tables, note that “Slow blinking” refers to an LED blink cycle of
2500 ms on, 2500 ms off; “Fast blinking” refers to an LED blink cycle of 500 ms on,
500 ms off. An asterisk (*) means that the setting does not matter.
DRAFT
Table B-3
9764 MCO Wi-Fi AP LEDs based on Admin status and WLAN mapping
Radio's Admin status
Radio's WLAN mapping
LED segment
Disabled
Off
Enabled
no WLAN mapped
Fast blinking
Enabled
WLAN mapped
Slow blinking
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-26
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
LED state description - 9764 MCO Wi-Fi AP
....................................................................................................................................................................................................................................
Table B-4
9764 MCO Wi-Fi AP LEDs during normal operation states
RADIO 1 / 2.4 GHz / GREEN LED
Segment
RADIO 2 / 5 GHz / RED LED Segment
Admin
status
WLAN
mapping
Segment
Behavior
Admin
status
WLAN
mapping
Segment
Behavior
Disabled
Off
Disabled
Off
Off
Enabled
no WLAN
Fast
Disabled
Off
Fast Green
WLAN
Slow
Off
Disabled
COMBINED
LED
Behavior
Slow Green
Enabled
Enabled
DRAFT
Installation of the 9764 MCO Wi-Fi AP
Enabled
no WLAN
Fast
Fast Red
WLAN
Slow
Slow Red
no WLAN
Fast
Fast Orange
no WLAN
Fast
WLAN
Slow
WLAN
Slow
Slow Orange
WLAN
Slow
no WLAN
Fast
Fast Red +
Slow Green
(results in a
green/orange/
red pattern)
no WLAN
Fast
WLAN
Slow
Slow Red +
Fast Green
(results in a
green/orange/
red pattern)
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
B-27
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
DRAFT
Installation of the 9764 MCO Wi-Fi AP
LED state description - 9764 MCO Wi-Fi AP
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
B-28
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
Appendix C: Product
conformance statements
Overview
Purpose
This section presents the product conformance statements that apply to the 9764 MCO
Access Point equipment.
The statements that are required are determined primarily by national or multinational
regulations. However, in some regions, contract terms determine which statements are
required.
The presence of the statement indicates that the product does comply with that statement
wherever it is required to do so.
Contents
United States compliance
C-2
Federal Communications Commission
C-3
Product safety and RF exposure
C-4
FDA/IEC optical transmitter product compliance statements
C-5
Eco-environmental statements
C-6
European Union
C-7
CE marking
C-8
EMC and radio spectrum compliance
C-9
Product safety and RF exposure
C-10
Eco-environmental statements
C-13
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
C-1
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product conformance statements
United States compliance
Introduction
....................................................................................................................................................................................................................................
United States compliance
Introduction
Purpose
The statements that follow are the product conformance statements that apply to the 9764
MCO when deployed in the United States.
DRAFT
Contents
Federal Communications Commission
C-3
Product safety and RF exposure
C-4
FDA/IEC optical transmitter product compliance statements
C-5
Eco-environmental statements
C-6
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
C-2
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Federal Communications Commission
....................................................................................................................................................................................................................................
Federal Communications Commission
DRAFT
Product conformance statements
United States compliance
Federal Communications Commission
Important! Changes or modifications not expressly approved by Alcatel-Lucent, Inc.
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the 47 CFR FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
47 CFR FCC Part 15 Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the 47 CFR FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
RF approval
This equipment complies with Part 2, Subpart J - Equipment Authorization Procedures, of
the 47 CFR FCC Rules.
This device complies with Part 22 – Public Mobile Services, Subpart H – Cellular
Radiotelephone Services.
This equipment complies with Part 24 - Personal Communications Services, Subpart E Broadband PCS.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
C-3
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product conformance statements
United States compliance
Product safety and RF exposure
....................................................................................................................................................................................................................................
Product safety and RF exposure
Product safety
The equipment complies with the following product safety specifications:
Standard reference
Title
Safety
EN 60950-22 (including EN 60950-1)
RF exposure
North America:
•
•
Canada Safety Code 6 – Limits of Human Exposure to Radio frequency
Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz. Together
with Canada RSS 102 for compliance of radio communication apparatus.
USA FCC 47CFR 1.1310 – Radio frequency radiation exposure limits. Together with
FCC OET Bulletin 65 and its supplements for evaluating compliance with FCC
guidelines for human exposure to RF fields.
Note: The results of the RF exposure assessment for NAR regulations and derived
recommendations may be extended to other countries using similar regulations.
The 9764 MCO is basically a radio transmitter and receiver. When it is turned on, it
receives and transmits radio frequency (RF) signals.
The system controls the transmitted power level within a range up to 1W per antenna port
for the following models:
•
9764 MCO V1.0 B25 LTE 2x1W
•
•
9764 MCO V1.1 B2 LTE 2x1W
9764 MCO V1.1 B2/B25 LTE 2x1W
and up to 2W per antenna port for the 9764 MCO V1.1 B2 LTE 2x2W model.
DRAFT
Installation of 9764 MCO shall be performed in accordance with all applicable
manufacturer's recommendations, and national laws and regulations. In particular:
•
Workers that are required to work in close proximity to the equipment, for example
maintenance personnel, should strictly follow instructions provided by their employer.
•
Workers equipped with personal medical electronic devices, such as pacemakers and
hearing aids, shall consult the manufacturer's instructions and consult their
occupational health practitioner.
The 9764 MCO shall be installed and operated with a minimum separation distance of
20 cm (8 inches) between the radiator and user (see: USA – FCC OET Bulletin 65 and
supplements and Canada – RSS 102).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
C-4
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
FDA/IEC optical transmitter product compliance statements
....................................................................................................................................................................................................................................
FDA/IEC optical transmitter product compliance statements
DRAFT
Product conformance statements
United States compliance
FDA/IEC optical transmitter product compliance
Alcatel-Lucent declares that this equipment complies with the Food and Drug
Administration’s Center for Devices and Radiological Health (FDA/CDRH) regulations
21 CFR 1040.10 and 1040.11. It is a Class I/1 laser optical fiber communication systems
“product” under the FDA.
This Product is designed to ensure that personnel operating the product are not
endangered by laser radiation during normal operation and fault conditions. This product
does not present a risk of eye injury because it is fully enclosed and does not contain
embedded lasers greater than Class I/1 unless otherwise noted.
Laser warning
WARNING
Laser hazard
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser radiation exposure.
Do not view directly into the laser beam with optical instruments such as a fiber
microscope because viewing of laser emission in excess of Class 1 limits significantly
increases the risk of eye damage.
Never look into the end of an exposed fiber or an open connector as long as the optical
source is switched on.
Ensure that the optical source is switched off before disconnecting optical fiber
connectors.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
C-5
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product conformance statements
United States compliance
Eco-environmental statements
....................................................................................................................................................................................................................................
Eco-environmental statements
Packaging collection and recovery requirements
Countries, states, localities, or other jurisdictions may require that systems be established
for the return and/or collection of packaging waste from the consumer, or other end user,
or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the
return and/or collection of the packaging waste may be established.
For more information regarding collection and recovery of packaging and packaging
waste within specific jurisdictions, contact the Alcatel-Lucent Environment, Health and
Safety organization or Alcatel-Lucent Hazardous Waste Center technical support at (888)
539-2783.
Material content compliance
The following notification applies to Alcatel-Lucent products distributed for sale, resale,
or use.
This product, part, or both may include a lithium-manganese dioxide battery, which
contains very small amounts of a perchlorate substance. Special handling may apply.
For California:
Perchlorate Material - special handling may apply.
DRAFT
See (https://dtsc.ca.gov/HazardousWaste/Perchlorate/index.cfm).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
C-6
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Overview
....................................................................................................................................................................................................................................
European Union
DRAFT
Product conformance statements
European Union
Introduction
Purpose
The statements that follow are the product conformance statements that apply to the
Alcatel-Lucent 9764 B7 MCO LTE equipment when deployed in the European Union.
Declaration of Conformity for radio and telecommunication terminal equipment
under the scope of Directive 1999/5/EC.
Hereby, Alcatel-Lucent declares that the equipment documented in this publication is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
The technical documentation as required by the Conformity Assessment procedure is kept
at the Alcatel-Lucent location which is responsible for this product. For more information
please contact your local Alcatel-Lucent Customer Service Organization.
Contents
CE marking
C-8
EMC and radio spectrum compliance
C-9
Product safety and RF exposure
C-10
Eco-environmental statements
C-13
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
C-7
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product conformance statements
European Union
CE marking
....................................................................................................................................................................................................................................
CE marking
CE marking
This product has been CE-marked in accordance with the following European Directives:
DRAFT
•
1999/05/EC Radio and Telecommunication Terminal Equipment (R&TTE)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
C-8
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
EMC and radio spectrum compliance
....................................................................................................................................................................................................................................
EMC and radio spectrum compliance
DRAFT
Product conformance statements
European Union
EMC compliance
The equipment complies with the following EMC specifications:
Standard reference
Title
EN 301 489-1 V1.9.2
Electromagnetic compatibility and Radio
spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services; Part 1: Common
technical requirements
EN 301 489-23 V1.5.1
Electromagnetic compatibility and Radio
spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services; Part 23: Specific
conditions for IMT-2000 CDMA, Direct Spread
(UTRA and E-UTRA) Base Station (BS) radio,
repeater and ancillary equipment
EN 55022:2006/A1:2007 Class B
Limits and methods of measurement of radio
disturbance characteristics of information
technology equipment
EN 55024:1998/A1:2001/A2:2003
Information technology equipment. Immunity
characteristics. Limits and methods of
measurement and measuring.
Radio spectrum compliance
The equipment complies with the following radio spectrum specifications:
Standard reference
Title
EN 301 908-1 V5.2.1
IMT cellular networks; Harmonized EN
covering the essential requirements of article
3.2 of the R Directive; Part 1: Introduction and
common requirements
EN 301 908-3 V5.2.1
IMT cellular networks; Harmonized EN
covering the essential requirements of article
3.2 of the R Directive; Part 3: CDMA Direct
Spread (UTRA FDD) Base Stations (BS)
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
C-9
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product conformance statements
European Union
Product safety and RF exposure
....................................................................................................................................................................................................................................
Product safety and RF exposure
Product safety
The equipment complies with the following product safety specifications:
Standard reference
Title
EN 60950-1: Ed 2 of 2006 + A1 (2010) +
A11 (2009) + A12 (2011)
Information Technology Equipment – Safety –
Part 1: General Requirements
EN 60950-22 (Ed 1 of 2006) + A11 (2008)
Information Technology Equipment – Safety –
Part 22: Equipment to be installed outdoors
RF exposure
Europe:
•
European Council recommendation 1999/519/EC on the limitation of exposure of the
general public to electromagnetic fields (0 Hz to 300 GHz). Together with EN 50383,
EN 50384, EN 50385 and IEC 62232.
•
Directive 2013/35/EU of the European Parliament and of the Council on the minimum
health and safety requirements regarding the exposure of workers to the risks arising
from physical agents (electromagnetic fields). Together with IEC 62232.
Note: These standards are aligned with the Guidelines of 1998 from the International
Commission for Non-Ionizing Radiation Protection (ICNIRP). The recommendations
provided below may also be extended to other ICNIRP based regulations.
The Alcatel-Lucent 9764 MCO V1.1 LTE 2x1W B3/B7 is basically a radio transmitter
and receiver. When it is turned on, it receives and transmits radio frequency (RF) signals.
The system controls the transmitted power level within a range up to 1 W per antenna
connector.
DRAFT
The Specific Absorption Rate (SAR) is a value that corresponds to the relative amount of
RF energy absorbed in the body of a person standing in the close vicinity of the
equipment. Measured SAR values result from an extensive assessment process defined by
international standards. Tests are performed in strict laboratory settings at the highest
transmitted power of the equipment. When in operation, the SAR resulting from of the
equipment emissions will most likely be substantially less than the measured values
because of a variety of factors including number and proximity of connected end users,
telecom traffic etc..
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
C-10
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Product safety and RF exposure
....................................................................................................................................................................................................................................
Installation for the Alcatel-Lucent 9764 MCO V1.1 LTE 2x1W B3/B7 equipment shall be
performed in accordance with all applicable manufacturer's recommendations, and
national laws and regulations. In particular:
•
Workers that are required to work in close proximity to the equipment, for example
maintenance personnel, should strictly follow instructions provided by their employer.
•
Workers equipped with personal medical electronic devices, such as pacemakers and
hearing aids, shall consult the manufacturer's instructions and consult their
occupational health practitioner.
DRAFT
Product conformance statements
European Union
Europe and countries with ICNIRP based regulations:
Alcatel-Lucent 9764 MCO LTE B3
According to the results of the SAR assessment of the Alcatel-Lucent 9764 MCO LTE
B3, the installation shall at least adhere to the following recommendations:
•
•
•
The equipment shall be installed in a location restricting access by the general public
to the area within 70 millimeters directly in front of the equipment shroud at full
transmit power. One practical implementation of this requirement is to ensure that the
equipment is mounted a minimum of 3 meters above local ground, this vertical
distance being measured from the local ground or closest walkway to the bottom of
the equipment.
The compliance distance with the ICNIRP/EU exposure limits values for workers is
20 mm at full transmit power. The equipment shall be powered off before any
operation or maintenance in the close vicinity of the shroud.
The operator or the entity putting the equipment into service shall stick the ISO
3866-2 warning label (cf. 2013/35/EU, 92/58/ECC & 2007/30/EC) provided together
with the equipment according to manufacturer’s instructions before the first power
switch on.
According to the results of the SAR assessment of the Alcatel-Lucent 9764 MCO LTE
B3, touch safe conditions for workers are achieved if the Tx power is less than or equal to
2*0.38 W and touch safe conditions for general public are achieved if the Tx power is less
than or equal to 2*0.076 W.
For further information on RF exposure, the following table provides indicative values of
electromagnetic field reference levels in the main lobe in front of the antenna:
Table C-1
Distances corresponding to reference levels for the general public and
workers at maximum Tx power
PTX max (2*1 W)
Electric field
(V/m)
Distance from the
shroud (m)
ICNIRP reference level and EU action level
for workers
130
0.13
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
C-11
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Product conformance statements
European Union
Product safety and RF exposure
....................................................................................................................................................................................................................................
Table C-1
Distances corresponding to reference levels for the general public and
workers at maximum Tx power (continued)
PTX max (2*1 W)
Electric field
(V/m)
Distance from the
shroud (m)
EU/ICNIRP reference level for the general
public
58
0.32
Alcatel-Lucent 9764 MCO LTE B7
According to the results of the SAR assessment of the Alcatel-Lucent 9764 MCO LTE
B7, the installation shall at least adhere to the following recommendations:
•
•
•
The equipment shall be installed in a location restricting access by the general public
to the area within 90 millimeters directly in front of the equipment shroud at full
transmit power. One practical implementation of this requirement is to ensure that the
equipment is mounted a minimum of 3 meters above local ground, this vertical
distance being measured from the local ground or closest walkway to the bottom of
the equipment.
The compliance distance with the ICNIRP/EU exposure limits values for workers is
10 mm at full transmit power. The equipment shall be powered off before any
operation or maintenance in the close vicinity of the shroud.
The operator or the entity putting the equipment into service shall stick the ISO
3866-2 warning label (cf. 2013/35/EU, 92/58/ECC & 2007/30/EC) provided together
with the equipment according to manufacturer’s instructions before the first power
switch on.
According to the results of the SAR assessment of the Alcatel-Lucent 9764 MCO LTE
B7, touch safe conditions for workers are achieved if the Tx power is less than or equal to
2*0.66 W and touch safe conditions for general public are achieved if the Tx power is less
than or equal to 2*0.13 W.
For further information on RF exposure, the following table provides indicative values of
electromagnetic field reference levels in the main lobe in front of the antenna:
DRAFT
Table C-2
Distances corresponding to reference levels for the general public and
workers at maximum Tx power
PTX max (2*1 W)
Electric field
(V/m)
Distance from the
shroud (m)
ICNIRP reference level and EU action level
for workers
140
0.1
EU/ICNIRP reference level for the general
public
61
0.4
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
C-12
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Eco-environmental statements
....................................................................................................................................................................................................................................
Eco-environmental statements
DRAFT
Product conformance statements
European Union
Packaging collection and recovery requirements
Countries, states, localities, or other jurisdictions may require that systems be established
for the return and/or collection of packaging waste from the consumer, or other end user,
or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the
return and/or collection of the packaging waste may be established. For more information
regarding collection and recovery of packaging and packaging waste within specific
jurisdictions, contact the Alcatel-Lucent Environment, Health and Safety organization.
Recycling / take-back / disposal of products
In compliance with Waste Electrical and Electronic Equipment Directive (WEEE
Directive) 2002/96/EC 01/2003, amended by WEEE Directive 2003/108/EC 12/2003,
electronic products bearing or referencing the symbols shown below shall be collected
and treated at the end of their useful life, in compliance with applicable European Union
and other local legislation. They shall not be disposed of as part of unsorted municipal
waste. Due to materials that may be contained in the product, such as heavy metals, the
environment and human health may be negatively impacted as a result of inappropriate
disposal.
Note 1: For electronic products put on the market in the European Union, a solid bar
under the crossed-out wheeled bin indicates that the product was put on the market after
13 August 2005.
Moreover, in compliance with legal requirements and contractual agreements, where
applicable, Alcatel-Lucent will offer to provide for the collection and treatment of
Alcatel-Lucent products bearing the logo at the end of their useful life, or products
displaced by Alcatel-Lucent equipment offers.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
C-13
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
For information regarding take-back of equipment by Alcatel-Lucent, or for more
information regarding the requirements for recycling/disposal of a product, please contact
your Alcatel-Lucent account manager. Visit the Alcatel-Lucent Take-Back
(http://www.alcatel-lucent.com/product_takeback) web page, or contact Alcatel-Lucent
DRAFT
Product conformance statements
European Union
Eco-environmental statements
....................................................................................................................................................................................................................................
Takeback Support at (mailto:takeback@alcatel-lucent.com). For technical information on
product treatment, consult the Alcatel-Lucent Recycling Information (http://www.
alcatel-lucent.com/product_recycling) web page.
Material content compliance
European Union
The European Union (EU) Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment (RoHS) Directive [2002/95/EC and its recast
2011/65/EU] as amended restricts the use of lead, mercury, cadmium, hexavalent
chromium, and polybrominated biphenyls and polybrominated diphenyl ethers in
electrical and electronic equipment. This Directive applies to electrical and electronic
products placed on the EU market after 1 July 2006, with various exemptions, including
an exemption for lead solder in network infrastructure equipment. Alcatel-Lucent
products shipped to the EU after 1 July 2006 comply with the EU RoHS Directive.
EU REACH
On June 1, 2007, European Regulation No 1907/2006 on the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH) entered into force. Under REACH,
companies operating in the EU may face certain obligations as manufacturers, importers
and/or downstream users.
DRAFT
Alcatel-Lucent complies with the current requirements of REACH. In particular, Article
33 of REACH requires suppliers to inform the recipients and consumers if an article
received contains more than 0.1% (by weight per article) of any substance(s) on the
Substances of Very High Concern (SVHC) candidate list. Alcatel-Lucent has verified the
use of substances listed on the candidate list of Substances of Very High Concern as
published on the ECHA website. Based on information received from our supply chain
we have no indication that any of the listed substances are present in any of our products,
subassemblies or expansion items over 0.1% weight for weight. We will continue to
monitor the status of the candidate list as part of our ongoing compliance activities.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
C-14
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
Appendix D: Document issue
history
Overview
Purpose
This chapter provides the reissue history of this document.
Contents
Document issue history
D-2
DRAFT
...................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
D-1
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Document issue history
Document issue history
....................................................................................................................................................................................................................................
Document issue history
Purpose
The reissue history of this document is described in the following paragraphs.
Issue 3.03 (September 2014)
The document changes from Issue 3, August 2014 are shown in the following table:
Table D-1
Document changes from Issue 3, September 2014
Feature/enhancement
Description
Location
Added information regarding the B2/B25
(combined) MCO.
“Supported installation options” (p. 2-13)
Documentation changes
9764 MCO V1.1
B2/B25 LTE 2x1W
model
“Product features and capabilities” in
“Functional description” (p. 2-2)
“Alcatel-Lucent 9764 Metro Cell Outdoor
LTE overview” and “Product labelling” in
“Physical description” (p. 2-4)
Pole mount options in:“Pole mount
installation requirements” (p. 3-5)
Wall mount in a pair configuration:Procedure
3-6: “Wall mount the 9764 Metro Dock in a
pair configuration” (p. 3-71)
Issue 3 (August 2014)
The document changes from Issue 2, June 2014 are shown in the following table:
Table D-2
Document changes from Issue 2,June 2014
Feature/enhancement
Description
Location
MCO to MetroDock
attachment procedure
Added rotation angles for key and detailed
graphics
Procedure 4-5: “Attach 9764 MCO module to
9764 Metro Dock” (p. 4-41)
MCO module ground
cabling
Added new step to ensure that the power is
off before performing the procedure
Procedure 4-3: “9764 MCO module ground
cabling” (p. 4-18)
Physical description
Update to the AC power surge protection
“Physical description” (p. 2-4)
Product power
requirements
Update to the AC and DC electrical rating
in order to align with the product label
specification.
“Product power requirements” (p. 4-27)
Documentation changes
Update to the statement regarding about
power related ancillary items.
DRAFT
Pre-installation
information
Added the DC power connector type
“Pre-installation information” (p. 4-3)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
D-2
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Document issue history
....................................................................................................................................................................................................................................
Table D-2
Document changes from Issue 2,June 2014
(continued)
Feature/enhancement
Description
Location
Installation
procedures for the
9764 MCO LTE
2x2W
Added procedure for the installation of the
RF antenna
Procedure 4-1: “Connect external RF antenna
to the Alcatel-Lucent 9764 MCO LTE 2x2W”
(p. 4-5)
Pair-mount
installation options
Added pair-mount information throughout
the document.
Added procedure for the installation of the
GPS antenna
DRAFT
Document issue history
Procedure 4-2: “Connect GPS antenna”
(p. 4-7)
“Supported installation options” (p. 2-13)
“Pole mount installation requirements”
(p. 3-5)
“Wall mount installation requirements”
(p. 3-9)
Issue 2 (June 2014)
The document changes from Issue 1.06, May 2014 are shown in the following table:
Table D-3
Document changes from Issue 1.06, May 2014
Feature/enhancement
Description
Location
External GPS antenna
Added 26/40 dB antenna selection rule and warning re
proximity to other antennas; updated purpose and
procedure selection table.
Procedure 4-2: “Connect GPS
antenna” (p. 4-7)
Power up procedure
Added procedure for powering on and troubleshooting
the MCO
Procedure 4-8: “Power on the
9764 MCO” (p. 4-52)
Documentation changes
Issue 1.06 (May 2014)
The document changes from Issue 1.05, May 2014 are shown in the following table:
Table D-4
Document changes from Issue 1.05, May 2014
Feature/enhancement
Description
Location
Updates for internal surge arrestor for electrical Ethernet
“Hardware and ancillary items”
(p. 2-17), “Install optional
internal surge arrestor”
(p. 3-102)
Documentation
standards update
Implementation of the new documentation standard for
the “What's new” block (replaces the former “Reason for
reissue” block).
“What's new” (p. xiii)
Sealing gasket
lubrication
Updates to MCO attachment procedure to include gasket
lubrication step and new graphics and clarifications
Procedure 4-5: “Attach 9764
MCO module to 9764 Metro
Dock” (p. 4-41)
Features
Internal surge arrestor
Documentation changes
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
D-3
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Document issue history
Document issue history
....................................................................................................................................................................................................................................
Table D-4
Document changes from Issue 1.05, May 2014
(continued)
Feature/enhancement
Description
Location
LED location
Added graphic to show location of LED
“LED status for 9764 MCO
LTE” (p. A-2)
Issue 1.05 (May 2014)
The document changes from Issue 1.04, May 2014 are shown in the following table:
Table D-5
Document changes from Issue 1.04, April 2014
Feature/enhancement
Description
Location
Added ESD wrist strap attachment step at the beginning
of relevant procedures
“9764 Metro Dock cabling”
(p. 3-89)
Documentation changes
ESD wrist strap
Issue 1.04 (April 2014)
The document changes from Issue 1.03, February 2014 are shown in the following table:
Table D-6
Document changes from Issue 1.03, February 2014
Feature/enhancement
Description
Location
Product conformance statements for MCO B3 and B7
variants
“Product safety and RF
exposure” (p. C-10)
Features
Conformance
statements
Issue 1.03 (February 2014)
The document changes from Issue 1.02, January 2014 are shown in the following table:
Table D-7
Document changes from Issue 1.02, January 2014
Feature/enhancement
Description
Location
Updates for internal GPS antenna solution
“Physical description” (p. 2-4),
Procedure 4-2: “Connect GPS
antenna” (p. 4-7)
Features
DRAFT
Internal GPS antenna
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
D-4
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Document issue history
....................................................................................................................................................................................................................................
Issue 1.02 (January 2014)
The document changes from Issue 1.01, December 2013 are shown in the following table:
Table D-8
DRAFT
Document issue history
Document changes from Issue 1.01, December 2013
Feature/enhancement
Description
Location
Updates to Wi-Fi AP LED state table
“LED status for 9764 MCO
LTE” (p. A-2)
Documentation changes
Wi-Fi AP LED
Issue 1.01 (December 2013)
The document changes from Issue 1, November 2013 are shown in the following table:
Table D-9
Document changes from Issue 1, November 2013
Feature/enhancement
Description
Location
Pair mount and daisy
chain
Pair-mount and daisy chain installation configurations
“Supported installation
options” (p. 2-13), Chapter 3,
“Installation of the 9764 Metro
Dock”
Wi-Fi AP
Wi-Fi AP installation procedures
“Supported installation
options” (p. 2-13), Appendix B,
“Installation of the 9764 MCO
Wi-Fi AP”
Features
Issue 1
Issue 1, November 2013, was the first publication of this document in support of the
product's first commercial availability in LR13.3.L.
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
D-5
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
DRAFT
Document issue history
Document issue history
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
D-6
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
DRAFT
Glossary
...................................................................................................................................................................................................................................
Numerics
3GPP
3rd Generation Partnership Project
...................................................................................................................................................................................................................................
A (Ampere)
Base SI unit of electrical current.
AC (Alternating Current)
Continuously variable current, rising to a maximum in one direction, falling to zero, then
reversing direction and repeating the cycle in the other direction.
AC convenience outlet
Sites must be equipped with at least two duplex outlets for installation and maintenance
procedures. The outlets are required to power test equipment and installation tools.
Ambient temperature
The temperature of air or other media in a designated area, particularly the area
ANSI (American National Standards Institute)
An organization chartered to accredit standards developed by a wide variety of industry groups,
without influence from any one company or organization. Does not develop standards, but
reviews and implements those developed by other organizations. ANSI is a member of the
International Standards Organization (ISO).
Antenna
An elevated device for radiating or receiving radio waves. It changes electrical currents into
electromagnetic waves, and vice versa.
AP
Access Point
AWG (American Wire Gauge)
American standard for classifying wire diameter.
...................................................................................................................................................................................................................................
Backup
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
GL-1
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Facility used to replace an element which has failed.
DRAFT
Glossary
....................................................................................................................................................................................................................................
Base station
The equipment that provides the air interface that allows mobile terminals to communicate with
the telecommunications network.
BBU
BaseBand Unit
BOCA
Building Officials and Code Administrators
Bonding
Permanent connection of metallic parts to form an electrically conductive path that will assure
electrical continuity and have the capability to safely conduct any current likely to be imposed.
Branch circuit
The circuit conductors between the final overcurrent device protecting the circuit and the
outlet(s).
Breaker, circuit
A cut-out device which breaks a circuit when preset limits of current are exceeded.
Buried ring ground
A buried, bare, tinned, solid copper cable encircling the site building and/or tower foundation.
...................................................................................................................................................................................................................................
CDRH
Center for Devices and Radiological Health
Cell site
An installation located within a cell that houses the equipment needed to set up and complete calls
on a cellular telephone.
CIC ((Customer Information Center))
Source for locating and obtaining delivery of Alcatel-Lucent customer documents.
Circuit
1. The complete path between two terminals over which one-way or two-way communications
may be provided. 2. An electronic path between two or more points, capable of providing a
number of channels. 3. A number of conductors connected together for the purpose of carrying an
electrical current. 4. An electronic closed-loop path among two or more points used for signal
transfer. 5. A number of electrical components, such as resistors, inductances, capacitors,
transistors, and power sources connected together in one or more closed loops.
Configuration
DRAFT
An arrangement of functional units according to their nature, number, and chief characteristics.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
GL-2
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
....................................................................................................................................................................................................................................
Controlled environment
An indoor location in which temperature, humidity, and ventilation are maintained at specific
levels.
DRAFT
Glossary
CPRI (Common Public Radio Interface)
Specification for the key internal interface of radio base stations between the Radio Equipment
Control (REC) and the Radio Equipment (RE).
CSA (Canadian Standards Association)
An independent, non-government, not-for-profit association for the development, by consensus,
of Canadian standards and product certifications.
CSC (Cell Site Configuration)
Sheets provided in this document for documenting cell site configuration, conditions, and other
pertinent information for reference during product deployment, and future additions.
...................................................................................................................................................................................................................................
dB (Decibel)
A unit which expresses the ratio of two voltages, currents, or powers. It is used to specify
transmission loss, gain, or relative level. It is equal to 20 times the common logarithm of the ratio
of two voltages or two currents, or 10 times the common logarithm of the ratio of two powers.
DC (Direct Current)
Current flow in one direction.
Diversity
A method of radio transmission and/or reception, which counteracts the effects of fading by
combining several signals all bearing the same information.
Driven ground rod
A copper-clad steel or stainless steel rod, a minimum of 2.4 meters (8 feet) long and 5/8 inch in
diameter.
...................................................................................................................................................................................................................................
Earthquake zone
Seismic ratings ranging from zone 1 (relatively low central office operational shock and vibration
levels) to the most severe zone 4 levels. Equipment must be able to withstand earthquake zone
requirements under both operational and non-operational conditions.
Electrolytic ground rod
A low resistance grounding rod (pipe) using low resistivity materials.
EU
European Union
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
GL-3
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Glossary
....................................................................................................................................................................................................................................
Exothermic weld
A method of making electrical connections of copper to copper or copper to steel using high
temperature fusion. The molten copper flows over conductors in a mold, melting and welding
them together.
...................................................................................................................................................................................................................................
Facility
Any element of physical telephone equipment needed to provide service, such as cables,
switching systems, and microwave radio transmission systems.
FCC (Federal Communications Commission)
A group founded in 1934 to regulate all types of communications in the United States.
FDA
Food and Drug Administration
Frequency
For a periodic wave, such as alternating current, the number of complete cycles per unit of time.
The unit of frequency is cycles per second, or hertz.
Fuse
An overcurrent protective device that has as its critical component a metal wire or strip that will
melt when heated by a prescribed (design) amperage, creating an open in the circuit of which it is
a part, thereby protecting the circuit from an overcurrent condition.
...................................................................................................................................................................................................................................
Gain
The ratio of output current, voltage, or power to input current, voltage, or power, respectively.
Gain is usually expressed in dB. If the ratio is less than unity, the gain, expressed in dB, will be
negative, in which case there is a loss between input and output.
GBE
GigaBit Ethernet
GFCI (Ground Fault Circuit Interrupter)
A device intended for protection of personnel that functions to de-energize a circuit or portion
thereof within an established period of time when a current to ground exceeds some
predetermined value that is less than that required to operate the overcurrent protective device of
the supply circuit.
GPS (Global Positioning System)
A system of 24 satellites that provides, among other things, extremely accurate timing information
to the cell sites.
DRAFT
Ground
A conducting connection between equipment or an electrical circuit and earth, or conductive body
that is used in place of earth.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
GL-4
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
....................................................................................................................................................................................................................................
Ground conductor
A conductor used to connect equipment or a grounded electrical circuit to the grounding electrode
system.
DRAFT
Glossary
Grounding electrode system
The conductive objects that are intentionally bonded to furnish connection to earth (i.e., buried
ring ground with ground rods, electrically continuous buried metallic water pipe, electrolytic
ground electrode, etc.).
Guy
Steel wire or rope used to hold a pole upright.
...................................................................................................................................................................................................................................
Heat dissipation
The heat generated by equipment during operation.
HSDPA
High Speed Downlink Packet Access
HSUPA
High Speed Uplink Packet Access
HV
High Voltage
Hz (Hertz)
A unit of frequency of a periodic process equal to one cycle per second.
...................................................................................................................................................................................................................................
ICNIRP
International Commission for Non-Ionizing Radiation Protection
IEEE
Institute of Electrical and Electronics Engineers
INTR (Intrusion Alarm)
The Intrusion (INTR) alarm indicates a door or access panel to the power system is open.
IT
In an IT earthing system, the electrical distribution system has no connection to earth at all, or it
has only a high impedance connection. In such systems, an insulation monitoring device is used to
monitor the impedance.
...................................................................................................................................................................................................................................
LAN
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
GL-5
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
Local Area Network
DRAFT
Glossary
....................................................................................................................................................................................................................................
Load
The power consumed by a device or circuit in performing its function.
Loss
The diminution, usually expressed in dB, of signal level in a communications medium. The
power, usually expressed in watts, consumed by a circuit or component. The energy dissipated
without accomplishing useful work or purpose.
LV
Low Voltage
...................................................................................................................................................................................................................................
MHz (Megahertz)
Reference of radio frequency spectrum of one-million cycles.
MOP (Method of Procedure)
Cell site walk-through where site preparation activities are verified prior to installing the 9412
eNodeB Compact equipment.
MSP
Mobile Service Provider
...................................................................................................................................................................................................................................
NEC (National Electric Code)
Standard that governs the use of electric wire, cable, and fixtures, and electrical and optical
communication cable installed in buildings.
Network
A set of terminals, the communications link that joins them, and the protocols that allow them to
function together and communicate with each other.
NFPA (National Fire Protection Association)
Standards and code writing organization made up of volunteer industrial and institutional
subject-matter-expert committees.
NFPA
National Fire Protection Association
Nominal
Specified value or intended value independent to any uncertainty in its realization. In a device that
realizes a physical quantity, it is the value of such a quantity specified by the manufacturer.
Non Alcatel-Lucent power
DRAFT
3rd party power systems, or power systems other than Alcatel-Lucent.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
GL-6
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
Phase
DRAFT
Glossary
The number of separate voltage waves in commercial alternating current, designated as "single
phase", "three phase", etc.
...................................................................................................................................................................................................................................
QAM
Quadrature Amplitude Modulation
QoE
Quality Of Experience
...................................................................................................................................................................................................................................
RCD
Residual Current Device
RF (Radio Frequency)
Electromagnetic wave used for, among other things, cellular voice and data communications.
RMS (Root Mean Square)
Effective value of an alternative wave. For AC, this is numerically equal to DC value of the
current with the same heating effect.
RoHS
Restriction of Hazardous Substances
Rx (Receive)
...................................................................................................................................................................................................................................
SAR (Specific Absorption Rate)
A measure of the rate at which energy is absorbed by the body when exposed to radio frequency
energy.
Sector
The coverage area within the degree of directionality of the antennas.
SFP
Small Form-Factor Pluggable (a transceiver module)
Shield
A housing, screen, sheath, or cover that substantially reduces the coupling of electric, magnetic, or
electromagnetic fields into or out of circuits or transmission lines.
Site
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
GL-7
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
An installation that houses the equipment needed to set up and complete calls on a cellular
telephone.
DRAFT
Glossary
....................................................................................................................................................................................................................................
Site preparation
To perform the requirements necessary at the site before installation can begin.
Stranded
Wires twisted together to form a strong flexible cable.
Surge protector
Protective device used to limit surge voltages by discharging or bypassing any unwanted surge
current that may enter a building or equipment.
...................................................................................................................................................................................................................................
T1
A four-wire voice and data trunking facility that carries 24 duplex channels over 56-kbps time
slots.
TN
In a TN earthing system, one of the points in the generator or transformer is connected with earth,
usually the star point in a three-phase system. The body of the electrical device is connected with
earth via this earth connection at the transformer.
TT
In a TT earthing system, the protective earth connection of the consumer is provided by a local
connection to earth, independent of any earth connection at the generator.
Twisted pair cable
Cable made up of one or more separately insulated twisted-wire pairs, none of which is arranged
with another to form quads.
Tx (Transmit)
...................................................................................................................................................................................................................................
UBC
Uniform Building Code
UL (Underwriters Laboratories)
Laboratories that test and approve materials and equipment against pre-determined performance
standards.
...................................................................................................................................................................................................................................
V (Volt)
The derived SI unit of electrical potential difference. It is the difference in potential between two
points of a conducting wire carrying a constant current of 1 ampere when the power dissipated
between these two points is equal to 1 watt.
DRAFT
V AC (Volts Alternating Current)
V DC (Volts Direct Current)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
GL-8
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
....................................................................................................................................................................................................................................
V rms (Volts Root Mean Square)
VSWR (Voltage Standing Wave Ratio)
DRAFT
Glossary
In a transmission line, the ratio of maximum to minimum voltage in a standing wave pattern. The
VSWR is a measure of impedance mismatch between the transmission line and its load. The
higher the VSWR, the greater the mismatch. The minimum VSWR, i.e., that which corresponds to
a perfect impedance match, is unity.
...................................................................................................................................................................................................................................
W (Watts)
The derived SI unit of power. It is equivalent to 1 joule per second, or 1 volt-ampere.
Walk-through
A critical examination of a design or product undertaken to ensure that it is of adequate quality.
Waveform
The characteristic shape of a periodic wave, determined by the frequencies present and their
amplitudes and relative phases.
WCDMA
Wideband Code Division Multiple Access
WEEE
Waste Electrical and Electronic Equipment
DRAFT
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
GL-9
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
DRAFT
Glossary
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
GL-10
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Numerics
9764 MCO module
additional optional items, 4-3
pre-installation, 4-3
DRAFT
Index
Attach9764 MCO module
remove, B-9
C cabling, 4-29
Connect external RF antenna, 4-5
9764 MCO Wi-Fi AP - Physical
description
Connect GPS antenna, 4-7
Debug interface, B-6
Product base items and
configurations, B-4
MCO module, 4-18
.............................................................
H Hardware and ancillary items
CE marking, C-8
9764 MCO Wi-Fi AP, B-2, B-25
Connection interfaces, B-4
Grounding
auto-commissioning, 4-51
product delivery contents, 4-3
Antennas, B-6
internal, 4-14
attach to 9764 Metro Dock,
4-41
.............................................................
tools, 4-3
GPS antenna, 4-12, 4-15
9764 MCO Wi-Fi AP, 2-17
9764 Metro Cell Module base
items, 2-17
Connectors, 2-8
9764 Metro Dock base items,
2-17
.............................................................
Ethernet cable (electrical),
2-19
D Daisy chaining
configurations, 3-15
Ethernet cable (optical), 2-19
device placement
Product labeling, B-6
Metro Cell, 3-3
Product overview, B-2
document support, xix
External antenna - GPS, 2-21
External RF antenna, 2-22
Grounding, 2-18
.............................................................
.............................................................
Installation kits, 2-17
A additional optional items
E Electrical Ethernet cabling, 3-99
Pair-mount configuration, 2-22
9764 MCO module, 4-3
EMC compliance, C-9
Power, 2-18
Metro Dock, 3-3
.............................................................
SFP modules, 2-18
Wi-Fi AP, B-8
F Final installation activities and
Surge arrestor, 2-19
Antenna
GPS antenna, 2-11
RF antenna, 2-10
checks, 3-112
.............................................................
G glossary, GL-1
.............................................................
Installation kits
for pole mount, 3-6
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
IN-1
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
for wall mount, 3-9
DRAFT
Index
....................................................................................................................................................................................................................................
Internal surge arrestor
Installation, 3-102
.............................................................
L LED
9764 MCO LTE, A-2
9764 MCO LTE 2x1W,
location, A-2
LED state description, A-1
LED status
9764 MCO Wi-Fi AP, B-25
.............................................................
Metro Dock cabling
Connect the electrical Ethernet
cable, 3-104
Connect the ground cable, 3-90
Connect the optical Ethernet
cable, 3-95
mount the surge arrestor, 3-109
Metro Dock Ethernet cabling, 3-92
Metro Dock ground cabling, 3-90
Metro Dock pole mount
using bands, 3-21
using screws, 3-20
M Material content compliance, C-14
MCO module ground cabling,
4-18
Metro Cell
Metro Dock pole mount using
screws, 3-20
device placement, 3-3
.............................................................
pre-installation, 3-3
O Orient 9764 MCO module, 4-48
Metro Cell Module
connectors, 2-8
overview, 2-6
status indicator, 2-12
Metro Cell Outdoor
Metro Dock
requirements, C-13
Pair-mount
Physical dimensions, 2-6
phone numbers
for document support, xix
Physical description, 2-4
9764 MCO Wi-Fi AP, B-2
Pole mount
additional optional items, 3-3
examples, 3-7
product delivery contents, 3-3
installation kits, 3-6
Standard wall mount, 3-36
options, 3-5
tools, 3-4
Power cord, connect, 4-33, 4-38
power on, 4-52
Power requirements
Product power specification,
4-27
Power requirements (AC)
AC power supply, 4-21
Conduit, 4-23
General, 4-21
Line surge protection, 4-22
Power junction box, 4-22
DC power supply, 4-24
P Packaging collection and recovery
without daisy chaining, 3-14
weights and dimensions, 2-5
Power connector, assemble, 4-30,
4-34
Conduit, 4-25
physical description, 2-4
RF antenna, 2-10
connection point, 4-28
.............................................................
with daisy chaining, 3-13
product labelling, 2-12
ancillary items, 4-27
Power requirements (DC)
GPS antenna, 2-11
power supply, 2-10
DRAFT
Metro Dock pole mount using
bands, 3-21
Power - product
post installation checks, 4-51
General, 4-24
Line surge protection, 4-25
Power Junction box, 4-25
Power supply, 2-10
pre-installation
9764 MCO module, 4-3
Metro Cell, 3-3
Wi-Fi AP, B-8
product conformance statements,
C-1
product delivery contents
9764 MCO module, 4-3
Metro Dock, 3-3
Wi-Fi AP, B-8
Product features and attributes, 2-2
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
IN-2
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014
Index
....................................................................................................................................................................................................................................
product labeling
9764 MCO Wi-Fi AP, B-6
product labelling, 2-12
product delivery contents, B-8
tools, B-8
with optional tilt brackets, 3-40
Product safety, C-10
.............................................................
R Radio spectrum compliance, C-9
Recycling / take-back / disposal of
products, C-13
RF exposure, C-4, C-10
.............................................................
S Standard wall mount, 3-36
status indicator, 2-12
Supported installation options
Daisy chain, 2-14
Pair-mount, 2-15
Standard, 2-13
.............................................................
T tools
9764 MCO module, 4-3
Metro Dock, 3-4
Wi-Fi AP, B-8
.............................................................
W Wall mount, 3-40
examples, 3-11
installation kits, 3-9
options, 3-9
Weights and dimensions, 2-5
Wi-Fi AP
additional optional items, B-8
attach to MCO module, B-19
installation, B-19
optional, B-1
pre-installation, B-8
....................................................................................................................................................................................................................................
Alcatel-Lucent 9764 MCO
Alcatel-Lucent – Internal
IN-3
3MN-01707-0002-RJZZA
Proprietary – Use pursuant to Company instruction
Issue 3.05 October 2014
DRAFT
DRAFT
Index
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Internal
Alcatel-Lucent 9764 MCO
IN-4
Proprietary – Use pursuant to Company instruction
3MN-01707-0002-RJZZA
Issue 3.05 October 2014

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : W.S. Majkowski
Create Date                     : 2014:12:19 20:14:47-05:00
Keywords                        : AS5BBTRX-21 , PCS, LTE, 9764 MetroCell, 2x2W, FCC, Majkowski, Part 24, GPCL 2014-0213, 2014-0214
Modify Date                     : 2015:01:29 19:28:34-05:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:01:29 19:28:34-05:00
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Format                          : application/pdf
Title                           : FCC Filing for AS5BBTRX-21 PCS LTE 9764 MetroCell MetroDock_Outdoor_Exhibits 1-10 rev-3
Creator                         : W.S. Majkowski
Description                     : PCS LTE 9764 MetroCell 2x2W filing
Subject                         : AS5BBTRX-21, PCS, LTE, 9764 MetroCell, 2x2W, FCC, Majkowski, Part 24, GPCL 2014-0213, 2014-0214
Document ID                     : uuid:df3fa3bb-6bc0-429a-8573-9aa0de22ec5d
Instance ID                     : uuid:2f62d02c-0d51-4c70-9af5-22a8e7b688bc
Page Count                      : 283

EXIF Metadata provided by EXIF.tools