Nortek Security and Control 00178 Alarm Control Panel User Manual

Nortek Security & Control LLC Alarm Control Panel

User Manual

GC2.5 Panel User GuideENGLISH(International)WIRELESS SECURITY SYSTEMWARNING: OWNER’S INSTRUCTION NOTICE Not to be removed by anyone except occupantPRINTERS INSTRUCTIONS: FILE: 10022313 X4 - GUIDE,USER,GO!CONTROL2.5 - INK: BLACK - MATERIAL: 20 LB MEAD BOND WITH 80 LB COATED COVER- SIZE: 5.5 x 8.5 INCH VERTICAL - SCALING 1-1 - FOLDING: ALBUM FOLD - BINDING: SADDLE-STICH
Copyright © 2018 Nortek Security & Control 1SYSTEM OVERVIEW ......................................................................... 4FEATURES ........................................................................................ 4BASIC OPERATION ................................................................................. 5Sensor Types/Zones ....................................................................................5Smoke, Heat, and Freeze Protection ......................................................................5Burglary Protection ....................................................................................5User Codes ...........................................................................................5Alarms ...............................................................................................5Messages.............................................................................................5Trouble Alerts .........................................................................................5Wireless Sensors ......................................................................................5CONTROL PANEL FEATURES ........................................................................ 6MAIN DISPLAY SCREENS............................................................................ 7Home Screen..........................................................................................7Security Screen........................................................................................7Ready to Arm Screen ...................................................................................7Menu Screen ..........................................................................................7Status Screen .........................................................................................7BURGLARY PROTECTION .................................................................... 8SAMPLE FLOOR PLAN ..............................................................................8SENSOR STATUS................................................................................... 9CHECKING FOR CLOSED SENSORS ................................................................... 9VIEWING EACH SENSOR’S STATUS................................................................... 10DEALING WITH A SENSOR FALSE ALARM............................................................. 10SENSOR BYPASSING .............................................................................. 11Force Bypass All Sensors ..............................................................................11Bypassing/Un-Bypassing Sensors .......................................................................11STAY MODE ...................................................................................... 12Entry Delay in Stay Mode ...............................................................................12Quick Exit in Stay Mode ................................................................................12SILENT CONTROL IN STAY MODE .................................................................... 12Arming to Stay Mode ..................................................................................13AWAY MODE...................................................................................... 13Exit and Entry Delays in Away Mode .................................................................13Exit Delay Restart .....................................................................................14Silent Control in Away Mode ............................................................................14Quick Exit in Away Mode ...............................................................................14Auto Stay Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Arming to Away Mode..................................................................................14DISARMING THE SYSTEM ..........................................................................15Disarming from Stay Mode .............................................................................15Disarming from Away Mode.............................................................................15IF A BURGLARY ALARM OCCURS .................................................................... 16Burglary Alarm Siren ..................................................................................16Alarm Memory .......................................................................................16Optional 2-Way Voice Communications ...................................................................16KEY FOB: ARMING AND DISARMING ................................................................. 16Arm with a Key Fob....................................................................................16Away Mode...........................................................................................16Disarm with a Key Fob .................................................................................17Activate the Emergency Alarm ..........................................................................17Activate the Auxiliary Output............................................................................17TABLE OF CONTENTS
Copyright © 2018 Nortek Security & Control 2WIRELESS KEYPAD: ARMING AND DISARMING ........................................................ 17Arm with a Keypad ....................................................................................17Away Mode...........................................................................................17Disarm with a Keypad..................................................................................17Activate a Fire Emergency ..............................................................................17Activate a Police Emergency ............................................................................17SMOKE, HEAT AND FREEZE PROTECTION ..................................................... 18Initiating a Fire Alarm Manually .........................................................................18If the Fire Alarm Sounds Automatically ...................................................................18Silencing a False Fire Alarm ............................................................................18RECOMMENDED FIRE ALARM LOCATIONS ............................................................ 19NFPA Standard #72 ...................................................................................19Do Not Mount a Smoke Alarm Here ......................................................................20Emergency Action Plan ................................................................................20EMERGENCY FUNCTIONS ................................................................... 2124-HOUR EMERGENCY BUTTONS.................................................................... 21Panic................................................................................................21Fire .................................................................................................21Emergency...........................................................................................21SYSTEM TROUBLE ALERTS ................................................................. 22TROUBLE ALERT ICON............................................................................. 22VIEW THE CURRENT TROUBLE ALERTS .............................................................. 22TROUBLE ALERT BEEP HOLD-OFF .................................................................. 22SYSTEM STATUS ICONS..................................................................... 23AC POWER ON.................................................................................... 23TEST MODE ...................................................................................... 23AC POWER OFF ................................................................................... 23TOUCH SCREEN KEYPAD TRAFFIC................................................................... 23SOUNDER DISABLED .............................................................................. 23CELL RADIO...................................................................................... 23LOW BACKUP BATTERY ............................................................................ 23INTERIOR SENSOR OPEN ..........................................................................23MESSAGING .............................................................................. 24DISPLAYING MESSAGES ...........................................................................24READING MESSAGES .............................................................................. 24READING CONFIDENTIAL MESSAGES ................................................................ 25FILTERING MESSAGES............................................................................. 25SORTING MESSAGES .............................................................................. 25SYSTEM TOOLBOX ......................................................................... 26USER MANAGEMENT .............................................................................. 26User Code Setup ......................................................................................26Adding a User Code ...................................................................................26User Code Validity.....................................................................................26User Code Access Schedules............................................................................26Adding/Editing User Access Schedules ...................................................................26Recurring User Access Schedules .......................................................................27Date User Access Schedule .............................................................................27Date Range User Access Schedule .......................................................................27Deleting User Access Schedule..........................................................................27User Codes ..........................................................................................27Deleting a User Code ..................................................................................28Duress User Code Setup ...............................................................................28Setting the Duress User Code ...........................................................................28
Copyright © 2018 Nortek Security & Control 3Secret Duress Button ..................................................................................28SYSTEM HISTORY ................................................................................. 29SYSTEM TEST .................................................................................... 29Sensor Test ..........................................................................................30Panel Test ...........................................................................................30CHIME SETUP .................................................................................... 30ADJUSTING THE BRIGHTNESS/VOLUME .............................................................. 31ADJUSTING THE BACKLIGHT TIMEOUT ............................................................... 32CLEANING THE TOUCH SCREEN .................................................................... 32SET DATE AND TIME............................................................................... 32DISPLAY FIRMWARE VERSION ...................................................................... 33DEALER INFO SCREEN AND CALL BACK BUTTON ...................................................... 33Accessing the Dealer Info Screen ........................................................................33Requesting a Service Call Back..........................................................................33INSTALLER PROGRAMMED OPTIONS ......................................................... 34Siren Run Time .......................................................................................34Sensor Trigger Limit ..................................................................................34Fire Horn Run Time ...................................................................................34Exit Delay............................................................................................34Entry Delay ..........................................................................................3424-Hour Emergency Functions ..........................................................................34Quick Arming.........................................................................................35Quick Bypass .........................................................................................35Quick Exit............................................................................................35Auto Un-bypass.......................................................................................35Auto Stay ............................................................................................35Key Fob Sound........................................................................................35Key Fob Disarm After Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Key Fob Options ......................................................................................35Wireless Keypad Emergency Keys .......................................................................36Exit Delay Restart .....................................................................................36Cancel Display........................................................................................36Cancel Time..........................................................................................36Dialer Delay..........................................................................................362-Way Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36INSTALLER SPECIFIC INFORMATION ......................................................... 37User Codes ..........................................................................................37Zones ...............................................................................................38SERVICE INFORMATION ....................................................................39REGULATORY INFORMATION ................................................................ 40Wireless Product Notice................................................................................40FCC Notice ...........................................................................................40IMPORTANT NOTICE .......................................................................41ALARM SYSTEM LIMITATIONS....................................................................... 41Panel Operating Conditions.............................................................................41LIMITED WARRANTY ....................................................................... 42
Copyright © 2018 Nortek Security & Control 4GC2.5 Wireless Security System | User GuideSYSTEM OVERVIEWThis system provides three (3) forms of protection: burglary, re, and emergency, depending on the options set by your installer. The system consists of a Control Panel with a color touch screen, wireless sensors that provide perimeter and interior burglary protection, and wireless smoke and carbon monoxide detectors. In addition, optional remote control key fobs, wireless panic buttons and keypads may have been provided or installed. The system monitors all protection “zones” and the system’s status. The Control Panel displays monitoring information and controls the alarm siren. Your system may have also been setup to send alarm and status reports to a Central Station and may have the capability for 2-way voice communications with the alarm monitoring operator. FEATURESThe following is a list of standard features and options that can be included in your system. Ask your installer which options are available, and check the boxes that apply. ●Stay and Away arming modes: Stay mode arms the system perimeter only and is used typically at night when the premises are occupied. Away mode arms the system perimeter and interior; it is used when the premises are unoccupied. ●60 user-unique 4-digit codes to operate the system: The system supports one (1) master user code that can assign and maintain the other user codes. ●One of the 60 user codes functions as a duress code. Controlling the system with this code gives the appearance of normal operation, but using it sends a silent duress report to the Central Station to initiate a silent alarm call for help. ●Voice announcements from the Control Panel: The system has a vocabulary of descriptive words that can be assigned to sensors so each has a unique announcement such as “front door” or “bedroom window” if desired. ●Home automation with the built-in Z-Wave controller for remote control of Z-Wave enabled home appliances (optional feature). ●Alarm history with system event log: Each alarm and system alert is logged into the system’s memory. These events can be displayed and reviewed at the Control Panel or reviewed remotely by the Central Station. ●Real-time clock and calendar appears on the system’s display and is used to time stamp items in the event log. 2-way voice communication: After an alarm, the system can automatically connect with a Central Station operator to converse with people in the premises. Remote control of the system using a Web-enabled device through the Internet.* Three optional 24-hour emergency functions: Panic, Fire, and Emergency. These functions can be activated by pressing buttons on the Control Panel, using wireless sensors, using the wireless keypad or using portable pendant devices (such as the panic button remote). * Requires the optional Cellular Radio Module.
Copyright © 2018 Nortek Security & Control 5GC2.5 Wireless Security System | User GuideBASIC OPERATIONThe following are general operational concepts that your system supports. Understanding these concepts will help you to use your security system to its fullest extent.Sensor Types/ZonesThe system’s wireless sensors have been assigned to selected “types” (often called “zones”). The sensor type determines how and when the system will react to a signal from the sensor. Some sensors are armed 24 hours a day. Other sensors are armed only when the system is armed.Smoke, Heat, and Freeze ProtectionIf wireless smoke, heat, and freeze detectors have been installed in your system, they are armed 24 hours a day. They will sound an alarm when smoke is detected and can report the re alarm to the Central Station. See “Smoke, Heat and Freeze Protection” on page 18 for emergency planning and evacuation information.Burglary ProtectionBurglary protection is provided by perimeter and interior sensors. When the system is armed in the Away mode, both perimeter and interior sensors are armed and can trigger an alarm. When the system is armed in the Stay mode, only the perimeter sensors are armed and can trigger an alarm.Both arming modes offer an Exit Delay that allows time to exit the premises without triggering the alarm. Upon re-entry, an Entry Delay is enabled that allows you time to disarm the system. You can set sensors to sound a chime and/or a voice announcement when they are triggered. This allows you to monitor your doors and windows while the system is disarmed.For more details, see “Burglary Protection” on page 8.User CodesThe system installer has already programmed a master user code for your system. This code can be used to control the system as well as assign and change the other user codes. The master user code can also access several system setup settings in the User Toolbox.AlarmsWhen an alarm occurs, the Control Panel’s siren and an external siren (if installed) sound for a preset period of time. During active alarms and after disarming, the alarm history button displays all the activated alarms and the sensors that were involved. The alarm history clears the next time the system is armed or can be cleared manually.MessagesYour security system supports receiving messages from the Central Station. The messages detail system upgrades, additional services, special regional weather alerts, etc.Trouble AlertsThe system monitors itself for abnormal operating conditions and will alert you if trouble is detected. Trouble conditions can be reported to the Central Station.Wireless SensorsYour security system comes with wireless sensors. Some sensors are visible, but others may be hidden by door-jambs or where the sensor is mounted. Depending on your type of installation and the amount of sensors installed with the Control Panel, sensors can include but are not limited to the following:Door/Window SensorGlass Break SensorCO SensorKey FobMotion DetectorSmoke/Heat/Freeze AlarmPanic Remote ButtonWireless Touch Screen KeypadSystem Overview
Copyright © 2018 Nortek Security & Control 6GC2.5 Wireless Security System | User GuideCONTROL PANEL FEATURESSee the table below for full descriptions of Control Panel Features.ACBDEAAlarm Sounder and Speaker Sounds all system local alarms, voice prompts, system sounds, and audio for two (2)-way voice communications with the Central StationBColor Display with TouchscreenDisplays all system information, status, programming, and functions as the keypad.The display cycles clock, calendar, and weather with an Alarm.com account (tap manually to change)CEmergency Button/Indicator Illuminates WHITE when enabled for emergency alarms and flashes during emergency alarmsDMicrophone Used for voice communication with the Central StationEHome Button/IndicatorSensor StatusIlluminates BLUE when all sensors are closed (Ready to Arm)Not lit when any sensor is open (not Ready to Arm)Arming StatusIlluminates RED when system is armedFlashes RED during the Entry DelayAlarm MemoryFlashes RED during an alarmFlashes RED after an alarm while system is still armedPower OutageFlashes WHITE during power outage (system on battery backup)Flashes BLUE when all sensors are closed (Ready to Arm)Flashes ORANGE when any sensor is open (not Ready to Arm)Flashes RED while system is armedSystem Overview
Copyright © 2018 Nortek Security & Control 7GC2.5 Wireless Security System | User GuideReady to Arm ScreenUse the Entry Delay screen to arm the security system in Stay and Away mode. You also have the option to select the Entry Delay and Silent Exit check boxes to turn those features ON.Menu ScreenUse the Menu screen to gain access to the Entry Delay, Emergency, or Toolbox screen.Status ScreenUse the controls in the Status screen to view the system’s current status and to review a scrolling list of alerts in a log format. The date, time and nature of any alerts are listed in the displayed log. ●Tap the Silence button to stop the system status voice announcement. ●Tap the  or  arrows to scroll through the list status messages.MAIN DISPLAY SCREENSUse the touch screen to control and operate the Control Panel. The touch screen includes a variety of buttons, indicators, and text for navigation and system operation.At the top-left of the Home screen, you can view the current system state. Scrolling text shows any pending alerts. The right side of the screen reveals a variety of system status icons.Home ScreenThe Home screen shows system status with icons to indicate system conditions. It also displays the time and date. The Home screen has Security, Services, Silent Control and Display Off buttons.TIP: Tap the Services button to access features for controlling Z-Wave devices. If Z-Wave features are not programmed, this button will not appear.Tap the Home button on the panel to reveal the Home screen.Security ScreenUse the Security screen to access the Arm, Menu, and Status screens. This screen also shows the current time and date. If messages, alarms, or trouble alerts are pending, square buttons indicate the number of pending alarms or messages.System Overview
Copyright © 2018 Nortek Security & Control 8GC2.5 Wireless Security System | User GuideBURGLARY PROTECTIONWhen your system was set up by your installer, wireless sensors were placed to monitor specic doors and windows. The installer selected these doors and windows as likely places where an unlawful intrusion may occur and be detected. Each sensor was programmed to have the system react in a specic way. See "Installer Programmed Options" on page 34 for specics about each sensor.Some sensor types (such as smoke detectors, carbon monoxide detectors, panic buttons, etc.) are always active and can trigger an alarm at any time. Other sensors on protected doors and windows are part of the burglary protection part of the system that can be turned on or off. Turning on the burglary protection part of the security system is called “Arming the System". The burglary protection part of the system can be armed in two modes: Stay mode or Away mode.SAMPLE FLOOR PLANRefer to the oor plan below. It shows a typical residential installation and the various types of wireless sensors and their functions.AFront and side door sensors have Exit/Entry Delay SMKE Smoke detectorBSide and main garage door sensors have Exit/Entry Delay CO Carbon monoxide detectorCP Control panel GB Glass break sensorDW Door/window sensor PAD Wireless keypadPIR Motion detector ES External sirenIMPORTANT: Security systems installed in a commercial location are for use only as a burglar alarm system and not for re protection. This security system has been evaluated and complies with UL 1610. For commercial installations (UL 1610), only one method of communication is to be used. This method of communication is a Cell Radio Module.
Copyright © 2018 Nortek Security & Control 9GC2.5 Wireless Security System | User GuideSENSOR STATUSThe security system constantly monitors all of the sensors attached to the protected doors and windows in your home or business. The Control Panel knows if each door or window with sensors is open or closed. The open or closed condition of the protected doors and windows is called the sensor status.For maximum security, all the doors and windows on your premises should be closed when you leave the building. In some cases, such as when using the security system when you stay at home, you may want to leave some doors or windows open. The system recognizes bypasses to resolve the open doors or windows. See "Bypassing/Un-Bypassing Sensors" on page 11.NOTE: Before you can arm the system, you must close or bypass all doors and windows with sensors.CHECKING FOR CLOSED SENSORSIn most cases, you will be arming the security system with all of the sensor-protected doors and windows closed. The Control Panel provides easy ways to verify that all the sensor-protected doors and windows are closed before arming the system: ●The Home button lights green when all perimeter sensors are closed. The Home button is not lit if any perimeter sensor is open. Open interior sensors do not change this indication. ●The Security button on the display’s Home screen lights green when all perimeter sensors are closed. The Security button lights orange if any perimeter sensor is open. Open interior sensors do not change this indication. ●The Arm button on the display’s Security screen and Menu screen lights green when all perimeter sensors are closed. If any interior sensors are open (or when any motion detector is triggered), a house icon displays on the status bar. The Arm button lights orange if any perimeter sensor is open.Burglary Protection
Copyright © 2018 Nortek Security & Control 10GC2.5 Wireless Security System | User GuideVIEWING EACH SENSOR’S STATUSThe Control Panel will also show you which sensor-protected doors and windows are open. Your installer has programmed descriptive names for each sensor-protected door and window. The Control Panel’s color display will show the names of which doors and windows are open. ●The top of the display on the Home, Security, and Menu screens shows sensor status. See “System Status Icons” on page 23. Tapping the Status button also displays a list of open sensors and general system status and alerts.ADBCAThe Status Bar shows the system mode and shows system status icons. See “System Status Icons” on page 23.BThe Arm button on the Security and Menu screens lights green when all perimeter sensors are closed. The Arm button lights orange if any perimeter sensor is open.CThe Home button lights blue when all perimeter sensors are closed. The Home button is not lit if any perimeter sensor is open.DThe icon displayed shows that an interior sensor is open. Other icons can appear here as well. See “System Status Icons” on page 23.DEALING WITH A SENSOR FALSE ALARMWhen armed, the Control Panel reports alarm conditions on all sensors, both visually (on the status bar, and through a system alert icon) and audibly (through voice and chime announcements). There are rare times when an sensor will send a false alarm condition to the Control Panel. The conditions of a false alarm vary depending on the type of sensor and how that sensor communicates with the Control Panel. ● Perform a System, Sensor, and Panel Test to nd any false alarm conditions. See "System Test" on page 29. See "Sensor Test" on page 29. See "Panel Test" on page 30.Burglary Protection
Copyright © 2018 Nortek Security & Control 11GC2.5 Wireless Security System | User GuideSENSOR BYPASSINGBefore the system can be armed, all protected doors and windows must be closed or bypassed. You can bypass open sensors on protected doors or windows before arming the system. When a sensor is bypassed, the system ignores that the door or window is open. Two types of sensor bypasses are available: ●Forced ●ManualIn some cases (such as when using the security system for protection when staying at home), it may be desirable to leave some sensor-protected doors or windows open. Temporarily bypassing a sensor for this situation is called Force Bypassing. NOTE: Force bypasses are automatically removed when the system is disarmed.Sensor bypassing is also sometimes used when a sensor requires service. A sensor’s magnet may be missing, or an external switch contact connected to a sensor may be faulty. This causes the sensor to report as open to the Control Panel. In these conditions, you may need to schedule a service call with your qualied alarm service technician to repair or replace the troubled sensor. If the security system needs to be armed before the sensor can be serviced, the sensor can be manually bypassed so the rest of the system can be armed. Depending on programming, manual bypasses can remain in place until they are manually removed.NOTE: Bypassed Sensors offer no protection and cannot cause an alarm. Use Bypass if you want to arm your system with one or more sensors open and intentionally unprotected.Force Bypass All SensorsIf any sensors are open when the system is disarmed, the Arm button on the panel turns YELLOW. When you tap the Arm button, the system automatically reveals the Bypass screen which lets you arm the system while forcing it to bypass all open sensors. To force bypass all open sensors: 1 Ensure a sensor is open, such as a door or window. 2 At the Security or Menu screen, tap the YELLOW Arm button. 3 At the Bypass screen, tap Bypass All. This forces the system to bypass all of the open sensors in the list, including any open interior sensors.4 At the Enter Code screen, enter a valid user code to bypass the sensor. NOTE: The Quick Bypass feature can also be congured by the installer. For details, refer to the Control Panel’s Installation & Programming Guide.5 At the Ready to Arm (Sensors Bypassed) screen, tap Stay or Away. Later, when you disarm the system, the bypassed sensors are returned to their normal state.Bypassing/Un-Bypassing SensorsTo add or remove sensors on the system’s bypass list:1 At the Home screen, tap Menu. 2 At the Menu screen, tap Toolbox.3 Enter a valid user code to gain access to the Toolbox. 4 At the Toolbox (1 of 3) screen, tap Bypassed Sensors.5 At the Bypassed Sensors screen, choose one of these options: ●Adding a sensor to the bypassed list. Tap the BLUE button that corresponds to the desired sensor. When the button turns YELLOW, the system will bypass the sensor. ●Viewing Only Bypassed Sensors. Place a check-mark in the Show Bypassed Only box. ●Removing a sensor from the bypassed list. Tap the YELLOW button that corresponds to the desired sensor. The button turns BLUE when it is no longer on the bypassed list.6 When nished, tap Back.Burglary Protection
Copyright © 2018 Nortek Security & Control 12GC2.5 Wireless Security System | User GuideSTAY MODEUse Stay mode to partially arm the system when individuals will be occupying the premises. This arms only the sensor-protected perimeter doors and windows. This leaves interior motion sensors or other interior doors unarmed. In a home setting, Stay mode is typically used during the evening hours when occupants are no longer expected to leave or enter the premises. This allows occupants to move about the premises without triggering the burglary alarm. Because all the interior burglary protection is OFF, an alarm would only be triggered when a sensor-protected perimeter door or window is opened.Entry Delay in Stay ModeCertain sensors, such as a door, can be congured by your installer to use a delay timer before triggering an alarm. This provides a way for an authorized person to enter using a predetermined door to disarm the system before an alarm is triggered. To arm the system using an Entry Delay:1 At the Security or Menu screen, tap the Arm button. 2 At the Ready to Arm screen, place a check-mark in the Entry Delay box. This is the default setting. NOTE: If you un-check the Entry Delay box, an alarm will be triggered when the sensor is opened while armed in Stay mode.3 Tap Stay to arm the systemNOTE: When re-entering the premises, the user must enter through the door(s) programmed to use the Entry Delay timer. This gives the user a specied amount of time to disarm the system. If the system is not disarmed in time, an alarm is triggered.Quick Exit in Stay ModeA programmable option, called Quick Exit may be displayed on the Security screen while the system is armed in Stay mode. Tap the Quick Exit button to start a timer that allows someone to exit or enter through a sensor-protected door that is programmed for delay without having to disarm the entire system. When the delay timer runs out, the system returns to the normal Stay mode. The Quick Exit option can be turned ON or OFF by the installer. See "Installer Programmed Options", on page 34, to understand the options that have been programmed for your system.SILENT CONTROL IN STAY MODEThree options for silencing the beeps and announcements are available when arming or disarming the system in Stay Mode. ●At the Home or Security screen, tap the Silent Control button. ●At the Ready to Arm screen, check the box adjacent to the Silent Exit option. ●On the Exit Delay screen, tap Silence.Selecting any of these options silences the Control Panel beeps and announcements. When arming, selecting the option doubles the length of the Exit Delay.Burglary Protection
Copyright © 2018 Nortek Security & Control 13GC2.5 Wireless Security System | User GuideArming to Stay ModeUse Stay Mode to arm the system when anyone is at home. Stay Mode normally has an Entry Delay so a user with a user code can re-enter without causing an alarm.1 Close all protected perimeter doors and windows before arming.2 Verify that the Home button on the Control Panel illuminates GREEN, indicating that the system is ready to arm. The Security and Arm buttons on the display are GREEN when all sensors are closed. NOTE: If you want to arm the system quietly without sounding any announcements, tap before performing these steps: ●At Ready to Arm screen, check the box adjacent to the Silent Exit option.Or ●During Exit Delay tap Silence.3 At the Security or Menu screen, tap Arm. NOTE: If any perimeter door or window sensors are open, the Bypass screen appears. Close all the sensors displayed, or tap Bypass All to force bypass the displayed sensors. NOTE: Bypassed sensors do not trigger an alarm. To bypass sensors, enter a user code unless the installer has set the system for Quick Bypass.4 On the Ready to Arm screen, check the Entry Delay box when arming the system in Stay mode. If no one is expected to re-enter, the system can be armed without an Entry Delay. All perimeter doors will trigger the alarm instantly. To arm with instant alarms for all exit/ entry perimeter doors, un-check the box adjacent to the Entry Delay option.5 Tap Stay to arm the system. NOTE: To arm the system, you may need to enter a user code if your installer has turned off the system’s Quick Arming feature.6 The system will arm and shows the Exit Delay counting down. When the Exit Delay expires, the system is fully armed in the Stay mode.AWAY MODEAway mode is for arming the system when everyone is leaving the premises. Away mode arms all sensor-protected perimeter doors and windows, interior motion sensors, interior glass break sensors and any other sensor-protected interior doors. The premises must be unoccupied while the system is armed. Away mode is typically used for arming the system during the daytime hours in a residential location, and non-business hours in a commercial location.When the system is armed in Away mode, you cannot move about the premises without triggering the burglary alarm (if the system is installed with interior motion detectors). An alarm also occurs if any sensor-protected door or window is opened or glass breakage is detected (if glass breakage detectors are installed in your system).Exit and Entry Delays in Away ModeCertain sensors, such as a door, can be setup by your installer to have a delay before triggering an alarm. This provides a way for an authorized person to exit and re-enter the premises without triggering an alarm. ●Exit Delay allows time to leave after arming the system. ●Entry Delay allows time to enter and disarm the system before an alarm is triggered.When arming the system in Away mode, an Entry Delay check box is shown on the Arming screen. By default, this option is checked, so the programmed delay doors allow time for disarming the system after the door is opened. If you clear the Entry Delay box, the delayed alarm trigger is removed from all sensor-protected doors programmed for delay. Those entrances instantly trigger an alarm if they are opened in Away mode.NOTE: With the Entry Delay disabled, you must remotely disarm the system with a wireless key fob before entering.Burglary Protection
Copyright © 2018 Nortek Security & Control 14GC2.5 Wireless Security System | User GuideExit Delay RestartThe Exit Delay Restart option extends the Exit Delay one time if you need to re-enter the premises. With the Exit Delay Restart option, when you re-enter the premises after you have left, but before the Exit Delay timer expires, the Exit Delay timer restarts, giving you the full length of time to leave again. TIP: The Exit Delay Restart option only works once, each time the system is armed.Silent Control in Away ModeThree options for silencing the beeps and announcements are available when arming or disarming the system in Away mode. ●On the Control Panel’s Home and Security screens, a Silent Control button is displayed. ●On the Arming screen, a Silent Exit check box is displayed. ●On the Exit Delay screen, a Silence button is displayed. Selecting any of these options silences the Control Panel beeps and announcements. When arming, selecting Silent Control doubles the length of the Exit Delay.Quick Exit in Away ModeA programmable option called Quick Exit may be displayed on the Security screen while the system is armed in the Away mode. Tapping the Quick Exit button starts a timer to allow someone to exit or enter through a sensor-protected door programmed for delay without having to disarm the entire system. When the delay timer runs out, the system returns to the normal Away mode.TIP: If interior sensors are installed in the system in certain areas, do not violate those sensors when using the Quick Exit feature in Away mode.Auto Stay ModeThe system may have been programmed by the installer for Auto Stay mode. If this option is on and the system is armed in Away mode, if an Exit/Entry Delay sensor is not triggered before the Exit Delay expires (no one leaves the premises), the system automatically arms in Stay mode instead of Away mode.NOTE: Quick options can be turned on or off by your installer. Refer to "Installer Programmed Options", on page 34, to see which options have been set for your system.Arming to Away ModeUse the Away mode to arm the system when everyone will be leaving the home. The Away mode normally has an entry delay so someone with a user code can re-enter without causing an alarm. Interior and perimeter sensors are armed in the Away mode.1 Close all sensor-protected doors and windows before arming.2 Verify that the button on the Control Panel is illuminated green, indicating that the system is Ready to Arm. The Security button and Arm button on the display will also be green when all perimeter sensors are closed. If the icon is displayed on the status bar, an interior sensor is open. Make certain to close or manually bypass the interior sensors or an alarm will occur.3 To arm the system quietly without sounding any announcements, tap the button before performing the next steps: ●At the Arming screen check the Silent Exit boxOr ●During the Exit Delay, tap Silence4 At the Security screen, or the Menu screen, tap Arm.NOTE: If any perimeter door or window sensors are open, the Bypass screen appears. Close all the sensors displayed or tap Bypass All to force bypass the displayed sensors.NOTE: Bypassed sensors do not trigger an alarm.To bypass sensors, enter a user code unless the installer has set the system for Quick Bypass.5 On the Arming screen, the Entry Delay check box option can be used with Away mode. ●The system can be armed without an Entry Delay. All perimeter doors trigger the alarm instantly. The system has to be disarmed with a wireless key fob. To arm with all exit/entry perimeter doors as instant, clear the Entry Delay check box.6 Tap Away. To arm the system, enter a user code if your installer has turned off the system’s Quick Arming feature.Burglary Protection
Copyright © 2018 Nortek Security & Control 15GC2.5 Wireless Security System | User Guide7 The system arms and shows the Exit Delay counting down. When the Exit Delay expires, the system is fully armed in the Away mode. NOTE: When the system is armed in the Away mode, beeps sound during the Exit Delay (these beeps become faster during the last 10 seconds).DISARMING THE SYSTEMTo stop the Control Panel from triggering burglary alarms, the system needs to be disarmed. Disarming turns off the burglary detection part of the system for sensors that are not 24-hour sensors. Disarming also stops any type of alarm in process.Disarm the system from Stay mode before exiting the premises. The system should be disarmed from Away mode before or while entering the premises. When disarming from the Control Panel or wireless keypad, enter a valid user code. A wireless key fob can also be used to disarm the system. Entering a user code is not required when disarming with a wireless key fob.An important feature of the Control Panel is its ability to warn you if an alarm has occurred while you were away. If an alarm was triggered while the system was armed, the alarm siren runs for a preset length of time then stops. When you enter to disarm the system, instead of sounding the normal Entry Delay beeps, the Control Panel sounds repeated fast beeps to warn you that an alarm has occurred while you were away.When you enter your home to disarm the system, if you hear fast repeated beeps instead of the normal Entry Delay beeps, use Extreme Caution! An intruder may still be present inside the building! Wait outside and use a Cell Phone to call law enforcement for assistance.Disarming from Stay ModeDisarm the system from Stay mode before exiting the premises.1 At the Home screen, tap for Silent Control.2 At the Security screen or the Menu screen, tap Disarm. This action displays the Disarm Code screen.3 The left side of the screen shows any events that have occurred while the system was armed.4 Enter a valid user code to disarm the system. ●In the event you tap the wrong key, the button erases the entire entry. ●Tap if you decide to not disarm the system at this time.Disarming from Away ModeThe system should be disarmed from Away mode while entering the premises.1 Enter the premises through a designated Entry Delay sensor-protected door.2 The Disarm Code screen displays on the Control Panel and the Entry Delay beeps sound. The left side of the screen shows events that have occurred while the system was armed.3 Enter a valid user code to disarm the system. ●In case you tap the wrong key, the button erases the entire entry.Burglary Protection
Copyright © 2018 Nortek Security & Control 16GC2.5 Wireless Security System | User GuideIF A BURGLARY ALARM OCCURSIf an armed sensor is tripped while the system is armed in the Stay or Away mode, an alarm occurs and the siren sounds. Delayed sensors start the Entry Delay to allow time to disarm the system. Instant sensors trigger the alarm right away. Most sensors trigger the alarm siren, some sensors may be set to trigger a silent alarm without sounding the siren.Burglary Alarm SirenIf a burglary alarm is tripped while the system is armed, the Control Panel sounds the alarm siren for a preset time (see "Installer Programmed Options" on page 34). After the time expires, the siren will stop.The system limits the number of times a sensor can re-trigger an alarm while the system is armed. The setting is one to six times per sensor, per arming period (see "Installer Programmed Options" on page 34).Alarm MemoryIf an alarm has occurred while the system was armed, the Disarm screen shows the time and date of the alarm and the sensor(s) that triggered the alarm.After the system is disarmed, the Alarm Memory screen appears. The Alarm Memory screen shows the sensor(s) that caused the alarm. If more than one sensor was triggered, the display shows the order in which the alarms occurred.The alarm memory automatically clears the next time the system is armed. You can also check the Clear Alarm History box and tap OK to manually clear the alarm memory (24-hour re and CO sensors that are still violated remain in alarm memory).Optional 2-Way Voice Communications2-way voice communications provides a method for alarm verication and can provide emergency assistance. The Control Panel contains a built-in microphone that can monitor sounds around the area of the Control Panel. The built-in microphone and speaker allow 2-way voice communications with a Central Station operator after an alarm. The operator can converse with people in the premises through the Control Panel’s speaker and microphone.Your installer can set the system to use 2-way voice communications after an alarm and/or after a panic alarm is triggered.NOTE: If a panic alarm or sensor is set for a silent alarm, the operator can only listen and will not be able to talk. This is for your protection.KEY FOB: ARMING AND DISARMINGYour system may be equipped with one or more wireless key fobs. Up to eight (8) key fobs can be used to control the system remotely. Each key fob has four (4) buttons and can perform ve (5) functions. A user code is not required when arming or disarming the system with a wireless key fob.Several key fob options can be set by the installer. See "Installer Programmed Options" on page 34. Arm with a Key FobStay ModeTo arm the system to Stay mode using a key fob, tap the Stay button.NOTE: Depending on setup options, if any perimeter doors or windows are open, the system may not allow arming to Stay mode with a wireless key fob. See "Installer Programmed Options" on page 34.Away ModeTo arm the system to Away mode using a key fob, tap the button.NOTE: Depending on setup options, if any perimeter doors or windows are open, the system may not allow arming to Away mode with a wireless key fob. See "Installer Programmed Options" on page 34.Burglary Protection
Copyright © 2018 Nortek Security & Control 17GC2.5 Wireless Security System | User GuideDisarm with a Key FobTo disarm the system from Stay or Away mode sing a key fob, tap the Disarm button.NOTE: To use your key fob to disarm your system, this option must already be enabled by your installer.Activate the Emergency AlarmTo trigger an emergency alarm using a key fob, press and hold the Away button and Disarm button simultaneously for 5 seconds.NOTE: If an emergency alarm is, triggered by a key fob, it cannot be stopped using the key fob Disarm button. The alarm must be canceled at the Control Panel.Activate the Auxiliary OutputTo trigger the Control Panel’s auxiliary,output, tap the Auxiliary button.If you use the Auxiliary button, the auxiliary output controls the _________________.WIRELESS KEYPAD: ARMING AND DISARMINGYour system may be equipped with one or more wireless keypads. Up to four (4) wireless keypads can be used to control the system remotely from the main Control Panel.Two types of wireless keypads are available. A wireless keypad without a screen, and a wireless touch screen keypad.The wireless touch screen keypad operates virtually the same as the Control Panel. Each standard wireless keypad has buttons for entering user codes, Stay and Away mode buttons, and Fire and Police emergency buttons.Check the See “Installer Programmed Options” on page 34, section in this guide to verify which 24-hour Fire and Police emergency buttons have been enabled by the installer.Arm with a KeypadStay ModeTo arm the system to Stay mode using a wireless keypad:1 At the Home screen, tap Security > Arm. 2 Enter a valid user code.3 Tap the Stay button.4 If Quick Arming has been programmed by your installer, just tap the Stay button.NOTE: If any perimeter door or window sensors are open, the system does not allow arming to Stay mode with a wireless keypad. All open sensors must be bypassed at the Control Panel rst.Away ModeTo arm the system to Away mode using a wireless keypad:1 At the Home screen, tap Security.2 At the Security screen, tap Arm.3 Enter a valid user code.4 Tap the Away button.5 If Quick Arming has been programmed by your installer, just tap the Away button.NOTE: If any perimeter door or window sensors are open, the system does not permit you to use a wireless keypad to arm the system in Away mode. All open sensor-protected doors and windows must either be closed or bypassed at the Control Panel before arming with a wireless keypad.Disarm with a KeypadTo disarm the system from Stay or Away mode, enter a user code.Activate a Fire EmergencyTo trigger an emergency re alarm using a wireless keypad, press and hold the Fire button for two (2) seconds.NOTE: To use a wireless keypad to trigger a re alarm, this option must already be enabled by your installer.Activate a Police EmergencyTo trigger an emergency police alarm using a wireless keypad, press and hold the Police button for two (2) seconds.NOTE: To use a wireless keypad to trigger a police alarm, this option must already be enabled by your installer.Burglary Protection
Copyright © 2018 Nortek Security & Control 18GC2.5 Wireless Security System | User GuideSMOKE, HEAT AND FREEZE PROTECTIONYour residential system should be installed with Smoke, Heat, and Freeze alarms as well as Carbon Monoxide detectors as a part of an overall re, heat, and gas protection system. Fire protection is active 24 hours a day, 365 days a year.NOTE: In Turkey, systems are installed with Smoke/Heat alarms.In the event of a re or poisonous CO gas emergency, the installed smoke or carbon monoxide detector automatically activates your security system. Not only will the re alarm itself emit a loud sound, the Control Panel emits an intermittent and loud horn on an external sounder (if an external sounder has been installed). The re alarm sound continues until the timer expires on the Fire Alarm or until you enter a user code at the Control Panel.If the Alarm Sounds: ●Get out and stay out. Never go back inside for people or pets. ●If you have to escape through smoke, get down low and go under the smoke. ● Call the re department from outside your home.Initiating a Fire Alarm ManuallyIf you become aware of a re emergency before your detector(s) sense an issue:IMPORTANT: Always yell “Fire” to alert everyone in proximity.1 Go the Control Panel and tap the Emergency button.2 At the Emergency screen, press and hold the Fire button for two (2) seconds. This action triggers the re alarm’s sounder and siren. You can also trigger the re alarm from the wireless keypad by holding down the Fire button.3 Get out and stay out of the dwelling. Never go back inside for people or pets.4 Call your local Fire Department from a safe location outside the dwelling.If the Fire Alarm Sounds AutomaticallyIf the re alarm sirens are sounding:1 If ames and smoke are present, yell “Fire” to alert everyone else.2 Evacuate all occupants from the premises and call your local Fire Department from a safe location.OR1 If no ames or smoke are apparent, investigate the causes of the alarm.2 Go to the Control Panel and enter your user code to stop the re sounder and sirens.3 Review the Alarm Memory to determine which sensor caused the alarm.4 Go to the sensor and look for a possible reason the sensor tripped.5 Correct the condition that caused the detector to trigger an alarm.Silencing a False Fire AlarmIf the re alarm is sounding due to a detector sensing burnt food or some other non-emergency condition:1 Silence the re alarm sounder by entering your user code.2 Review the alarm memory to determine which sensor caused the alarm (See "Alarm Memory" on page 16). If the alarm restarts, there may still be smoke inside the detector’s sensor. Re-enter your user code to stop the alarm from continuing to sound.3 Fan the detector for 30 seconds to clear the detector’s sensor chamber.4 After the problem has been corrected, from the Alarm Memory screen, check Clear Alarm History, then tap OK.NOTE: Violated Fire and CO sensors clear from Alarm Memory screen only when the sensors return to normal operation.5 Carefully inspect your premises for re, heat, or gas if your Fire Alarms and CO Detectors remain in alarm state.
Copyright © 2018 Nortek Security & Control 19GC2.5 Wireless Security System | User GuideRECOMMENDED FIRE ALARM LOCATIONSIn the United States, this equipment shall be installed in accordance with the National Fire Alarm Code, ANSI/NFPA 72, (National Fire Protection Association, Batterymarch Park, Quincy, MA 02269). Printed information describing proper installation, operation, testing, maintenance, evacuation planning, and repair service is to be provided with smoke detectors and alarms.NFPA Standard #72The National Fire Protection Association’s (NFPA) Standard #72 recommends the following placement for smoke detectors:Early warning re detection is best achieved by the installation of re detection equipment in all rooms and areas of the household. The equipment should be installed as follows: ●Install a smoke detector outside each separate sleeping area, in the immediate vicinity of the bedrooms and on each additional story of the family living unit, including basements (excludes crawl spaces and unnished attics).Also install smoke detectors in the living room, dining room, bedrooms, kitchen, hallway(s), nished attics, furnace room, utility/storage rooms and attached garages.Smoke, Heat and Freeze Protection
Copyright © 2018 Nortek Security & Control 20GC2.5 Wireless Security System | User GuideDo Not Mount a Smoke Alarm Here ●Directly above a sink, cooker, stove, or oven ●Within 5 feet (1.5 m) of any cooking appliance ●Next to a door or window that would be affected by drafts (extractor fan or air vent) ●Outside ●In or below a cupboard ● Where air ow would be obstructed by curtains or furniture ●Where dirt or dust could collect and block the sensor ●Where it could be knocked, damaged, or inadvertently removedFire-warning equipment for residential occupancies are capable of protecting about 50% of the occupants in potentially fatal res. Victims include the elderly, children, and the physically or mentally impaired. Victims include any persons who cannot escape even when warned early enough that escape should be possible. For these people, other strategies such as protection-in-place or assisted rescue or escape would be necessary. ●Studies show that Smoke/Heat/Freeze Alarms may not awaken all sleeping individuals. Individuals in the household who are capable of assisting others are responsible for providing assistance to those who may not be awakened by the audible alarm or those who may be incapable of safely evacuating the area unassisted. ● A battery-powered alarm must have the specic battery type installed, be in good condition, and be mounted properly. ●The use of alcohol or drugs may also impair the ability to hear the audible alarm. For maximum protection, ensure that an audible alarm is installed on every oor. ●Smoke/Heat Alarms only provide protection to the residence if smoke actually reaches the alarm. The Smoke/Heat Alarm is not a substitute for an insurance policy. Home owners and renters should have adequate insurance to protect their properties.Emergency Action PlanEstablish and regularly practice a plan of escape with all members of your household in the event of re. The National Fire Protection Association recommends the following steps:1 Mount your detector or your interior or exterior sounders where they can be heard by all.2 Determine two means of escape from each room. One path of escape should lead to the door that permits normal exit from the building. The other should be an alternate escape (such as a window) should the path to a door be impassable. Station an escape ladder at such windows if there is a long drop to the ground.3 Sketch a oor plan of the building. Show windows, doors, stairs, and rooftops that can be used to escape. Indicate escape routes for each room. Keep these routes free from obstructions and post copies of the escape routes in every room.4 Ensure that all bedroom doors are shut while you are asleep to prevent deadly smoke from entering while you escape.5 Try the door. If the door is hot, check your alternate escape route. If the door is cool, open it cautiously. Be prepared to slam the door shut if smoke or heat rushes in.6 When smoke is present, crawl on the ground. Do not walk upright, since smoke rises and may overcome you. Clearer air is near the oor.7 Escape quickly, but do not panic.8 Establish a place outdoors, away from your house, where everyone can meet and then take steps to contact the authorities and account for those missing. Choose someone to assure that nobody returns to the house — many die going back.Smoke, Heat and Freeze Protection
Copyright © 2018 Nortek Security & Control 21GC2.5 Wireless Security System | User GuideEMERGENCY FUNCTIONS24-HOUR EMERGENCY BUTTONSThree 24-hour emergency functions are available on the Control Panel: ●Panic ●Fire ●EmergencyYou can activate emergency functions using the Control Panel, as well as wireless sensors, wireless keypads or portable pendant devices such as the panic button remote.Tap the button to reveal the Emergency screen. This button does not trigger an alarm. During the installation, your installer programmed the emergency buttons that are displayed on the Emergency screen. If, however, no emergency functions are available, an information screen displays. To see which emergency functions are available on your system, tap the button.In the event of an emergency, press and hold the Emergency button for at least two (2) seconds to activate the alarm.AIf emergency functions are available, the Emergency button is a solid white lighted button.BTo display the Emergency screen, press the Emergency button.CThe Emergency screen.DThe Emergency screen displays the emergency options that are available on your system.PanicThe Panic (or police) button sends an immediate panic report to the Central Station. During installation, the installer either set the system to sound the siren when the button is pressed, or to not sound the siren, but to trigger a silent alarm.FireThe Fire button sends an immediate re report to the Central Station. The Control Panel sounds the re horn when the button is pressed.EmergencyThe Emergency button sends an immediate report to the Central Station. The Control Panel sounds the siren when the emergency button is pressed.ADBC
Copyright © 2018 Nortek Security & Control 22GC2.5 Wireless Security System | User GuideSYSTEM TROUBLE ALERTSThe system continually polls wired sensors, wireless sensors and the Control Panel itself to ensure optimal operating conditions at all times. If trouble is detected, the system alerts you.The system monitors the following conditions among others: ●AC power to the Control Panel ●The telephone line (optional) ●The cell telephone connection (if used) ●The Control Panel’s backup battery ●The Sensor batteries ●Sensor supervisory status (if used) ●External sounder connection ●Sensor radio reception and sensor tampering (sensor’s case opened) when disarmed ●Control Panel tampering (panel’s case opening) when disarmed (optional) ●Communication to the Central Station. You have the option to have any or all trouble conditions reported to the Central Station. If a trouble condition exists, service your system immediately to ensure no lapse in service or protection.TROUBLE ALERT ICONIf the system detects trouble, it ashes the trouble Alert icon on the Security screen and sounds 6 alert beeps every minute. Scrolling text along the top of the display also describes the trouble condition.The trouble Alert icon displays a number in the upper right corner that shows the number of current trouble alerts.The trouble Alert icon ashes until the trouble alerts are acknowledged, then it remains constantly lit until all the troubles are corrected. When all troubles are corrected, the icon disappears completely.VIEW THE CURRENT TROUBLE ALERTS1 To display all current trouble alerts, tap the Trouble Alert icon.2 View the listed trouble events. If there are more than 3 alerts, use the  and  arrows to scroll through the list.3 After viewing the trouble events, tap OK to acknowledge. This action silences the alert beeps.TROUBLE ALERT BEEP HOLD-OFFDuring the installation, as an option, the system can be programmed by your installer to suppress the trouble alert sounder from 10 pm to 9 am. Any trouble alerts will still be displayed and reported (if enabled), but the sounder does not beep during nighttime hours. Some trouble conditions may clear automatically while other trouble conditions may require service to correct. If a trouble condition still exists after 9 am, the sounder beeps to indicate trouble.NOTE: Regardless of whether the trouble alert sounder is suppressed or not, every trouble condition is always displayed on the trouble alert list and recorded in the system history event log.
Copyright © 2018 Nortek Security & Control 23GC2.5 Wireless Security System | User GuideSYSTEM STATUS ICONSAC POWER ONThe AC Power icon shows the status of the AC power to the Control Panel. A WHITE plug appears when AC power is present.TEST MODEThis icon displays when the system is in Walk Test mode.AC POWER OFFThe AC Power icon shows the status of the AC power to the Control Panel. A RED “X” appears over the WHITE plug when AC power is absent.TOUCH SCREEN KEYPAD TRAFFICAn up arrow indicates the panel is sending information to the touch screen keypad (if installed). A down arrow indicates the touch screen keypad is sending information to panel.SOUNDER DISABLEDIf the system’s internal sounder has been lowered and external sounder has been disabled by the installer for testing, the sounder disabled icon appears. It also ashes to indicate silent arming.CELL RADIOIf the option GSM (Cellular) Radio Module is installed, the Cell Radio icon appears while the Control Panel is receiving Over-the-Air (OTA) rmware updates.LOW BACKUP BATTERYIf the Control Panel’s backup battery tests low, the low backup battery icon appears.INTERIOR SENSOR OPENIf an interior sensor is open or a motion detector has just been activated, this icon appears. As a warning, the icon ashes during arming.
Copyright © 2018 Nortek Security & Control 24GC2.5 Wireless Security System | User GuideMESSAGINGYour security system supports receiving messages from the Central Station. The messages can be about system upgrades, additional services, special regional weather alerts, etc. The messages can be sent for all system users to read, or as condential messages that only the Master User can read. Messages can be tagged by the sender in the following manner: ●Standard (blue message icon) ●Urgent (yellow message icon) ●Emergency Priority (red message icon) Up to 31 text messages can be stored in the Control Panel’s memory. You can review them through the Control Panel’s display. Displayed messages are sorted in the following manner: ●Type ●Date ●AlphabeticallyDISPLAYING MESSAGESWhen a message is sent to the Control Panel, 3 beeps sound and the message icon displays on the Security screen. Standard messages display a blue message icon with a number of unread messages in the upper right corner. Urgent messages display a yellow message icon with an attention symbol in the upper right corner. Emergency messages display a red message icon with the bell symbol in the upper right corner.READING MESSAGESWhen a message icon appears on your Home screen:1 Tap the message icon button. The message list displays. The status bar shows the number of messages in memory, number of unread, and number of priority messages. Unread messages display in bold.2 Use the  or  arrows to scroll through the message list.3 Tap the message line itself to read the message.4 Tap Back to return to the message list, or tap Delete to erase the message. NOTE: If you check the Mark Read box, the message remains on the message list, but it no longer displays in bold.5 When deleting a message, a conrmation screen displays. Tap Delete Message, or to return to the message, tap Cancel.
Copyright © 2018 Nortek Security & Control 25GC2.5 Wireless Security System | User GuideREADING CONFIDENTIAL MESSAGESNOTE: When a condential message is sent to the Control Panel, only the Master User with the master user code can read the message.When a condential message appears, the Master User should do the following:1 Tap the message line on the message list. If the message is a condential message, the Code Entry screen appears.2 Enter the master user code. Other user codes are not accepted.3 View the displayed message.4 As detailed in "Reading Messages" on page 24, either save or delete.FILTERING MESSAGESTo select the type of messages that are displayed on the message list, use the Message Filter screen.1 To display the Message Filter screen, tap Filters.2 Check or clear the boxes of the types of messages to display. To check all types of messages, tap All. To return to the message list, tap Back.The lters will reset when the following occurs: ●You select All Types ●Your message reviewing is over ●The system displays the Security screenSORTING MESSAGESTo select the order in which messages are displayed on the message list, use the Message Sort screen.1 To display the Message Sort screen, tap Sorts.2 To sort the messages, pick from the following options: ●Date received ●Date expired ●Alphabetically3 To reverse the display order, check the Reverse box.4 To list urgent messages rst, check the Priority box.5 To return to the message list, tap Back.6 When the message reviewing session is over, the sort options will reset.Messaging
Copyright © 2018 Nortek Security & Control 26GC2.5 Wireless Security System | User GuideSYSTEM TOOLBOXUSER MANAGEMENTThe system installer has programmed a master user code for your system. This code can be used to control the system, as well as to assign and change the other 59 user codes and access options. The master user code can also access several system settings in the Toolbox.NOTE: The other 59 user codes are restricted from accessing settings in the Toolbox.User Code SetupIMPORTANT: The holder of the master user code is the only user who has permission to set up other user codes.To set up the user codes:1 At the Home screen, tap Security.2 At the Security screen, tap Menu.3 At the Menu screen, tap Toolbox.4 Enter the master user code to access the Toolbox5 On the Toolbox (1 of 3) screen, tap User Management.6 The Users Management screen displays 3 users at a time. Use the  and  arrows to scroll through the list.Adding a User CodeIMPORTANT: User codes 0000 and 0001 are not permitted.1 Tap one of the Add User buttons.2 Enter a unique four (4)-digit code for the new user code. Then tap OK.3 Enter the code again to conrm it. Then tap OK.4 At the Conrmation screen, tap OK to return to the User Management screen.User Code ValidityAfter the Conrmation screen appears and you click OK, the user codes Access Option screen appears. Select one of the three options to validate the user code: ●Select Always to set this user code to always be valid. Tap Back. ●Select Never to set this user code to never be valid. Tap Back. ●Select By Schedule to set this user code to be valid only for selected days and/or times.User Code Access SchedulesYou can set up user codes with one or more Access Schedules. Access Schedules limit access to your system to people with user codes (such as maintenance personnel, service, or cleaning personnel).Adding/Editing User Access Schedules1 If you selected By Schedule for the user code, the Edit Schedules button appears.2 To select or edit an existing user code Access Schedule, tap Edit Schedules. You can also create a new user schedule from the Edit Schedules screen.3 The User Access Schedules screen displays all current schedules for the user code.4 To add a new schedule, tap Add Schedule or to edit a schedule, tap an existing schedule.5 You can select 1 of 3 Schedule types: ●Recurring. Recurring applies to the days of the week and time period that this user code is valid. ●Date. Date applies to a single specic date and time period that this user code is valid. ●Date Range. Date Range denes a starting date, an ending date, and time period during which this user code is valid.
Copyright © 2018 Nortek Security & Control 27GC2.5 Wireless Security System | User GuideRecurring User Access SchedulesYou can dene up to 7 Access Schedules for user codes with and Access Option of Always.1 For the schedule type, select Always.2 To view the User Access Schedule screen, tap the calendar button.3 Select the day(s) of the week that this user code will be valid with the check boxes.4 Tap the left and right time buttons to set the starting and ending times that this user code will be valid on the selected days of the week.5 Tap OK to accept the schedule, or Cancel to return to the Schedule Type screen.Date User Access Schedule1 For the schedule type, select Date.2 To view the User Access Schedule screen, tap the calendar button.3 To set the only month, day, and year that this user code is valid, tap the date button.4 Tap the left and right time buttons to set the start and end times that this user code is valid on that date.5 Tap OK to accept the schedule, or Cancel to return to the Schedule Type screen.Date Range User Access Schedule1 For Schedule type, select Date Range.2 To view the User Access Schedule screen, tap the calendar button.3 Tap the rst day button to set the month, day, and year that this user code will rst become valid.4 Tap the last day button to set the month, day, and year that this user code will last be valid.5 Tap the left and right time buttons to set the starting and ending times that this user code is valid during the date range.6 To accept the schedule, tap OK or Cancel to return to the Schedule Type screen.Deleting User Access Schedule1 On the User Management screen, select a user code that has a calendar schedule icon.2 Tap the Edit Schedules button.3 On the User Access Schedule screen, select the schedule to delete.4 On the Schedule Type screen tap Delete. 5 A conrmation screen appears to verify that you want to delete the User Access Schedule. If Ok, tap Delete Schedule or tap Cancel to return to the User Access Schedule screen.6 6 A second screen conrms that the schedule was deleted. Tap OK.User CodesChanging a User Code1 At the User Management screen, tap the User button to change the user code.2 Ensure that the current user code appears. Then tap Change Pin.3 Enter a new four (4)-digit user code to use as the PIN. Then tap OK.System Toolbox
Copyright © 2018 Nortek Security & Control 28GC2.5 Wireless Security System | User Guide4 To conrm the user code, enter then new code again. Tap OK.5 A conrmation screen appears, showing that the user code was changed. Tap OK.Deleting a User Code1 To delete a user code from the User Management screen, tap the User button.2 Tap Delete.3 A conrmation screen appears to verify that you want to delete the user code. If Ok, tap Delete User or tap Cancel to return to the user codes Access Option screen.4 A conrmation screen appears displaying the user code that was deleted. Tap OK.TIP: You can change the master user code, but you cannot delete it.Duress User Code SetupThe Duress Code (User Code #8) initiates a silent alarm for help by secretly sending a Duress report to the Central Station. Use the duress code when someone is forcing you to operate your security system against your will. When you use the duress code, a silent report is immediately sent to the Central Station and they will dispatch help.Setting the Duress User Code1 On the User Management screen, tap the User 8 (Duress) button.2 A conrmation screen appears: Tap Create Duress User.3 Enter a four (4)-digit code to use as the new duress code. Then tap OK.4 To conrm the duress code, enter the code again and tap OK.5 A conrmation screen appears. Tap OK.6 The User 8 edit screen appears. To return to the User Management screen, tap Back.Secret Duress ButtonOn the Home screen, the system logo always appears in the lower right corner. The system logo is the secret duress button.While ArmedWith the system armed, tapping the logo displays the standard disarm code entry screen. Use a valid user code or a duress user code to disarm the system. The system disarms normally, but a silent duress report is sent to the Central Station and they will dispatch help. If supported by the 2GIG Alarm dealer, the left side of this screen also displays contact information for the alarm dealer or Central Station.System Toolbox
Copyright © 2018 Nortek Security & Control 29GC2.5 Wireless Security System | User GuideWhile DisarmedYou can also use the secret duress button while the system is disarmed. Tapping the system logo reveals the Enter Code screen. Enter the duress code to send a silent duress report to the Central Station and they will dispatch help. The system remains disarmed. If supported by the 2GIG Alarm dealer, the left side of this screen also displays contact information for the alarm dealer or Central Station.SYSTEM HISTORYThe Control Panel keeps a log of system events in the order in which they occur. Each event is marked with the date and time that the event occurred.To make reading the log easier, the system history display can be ltered to show selected events only. The events that can be ltered for the system history log display are: ●Armor disarm of the system ●Bypasses of sensors (force bypasses and manual bypasses) ●Alarms (alarms are displayed with a red stripe) ●Alerts (alerts are displayed with a yellow stripe)Some system events always display regardless of the lters selected. These events include: ●Walk test started or terminated ●Programming mode started or terminatedTo view the system history log:1 At the Home screen, tap Security. 2 At the Security screen, tap Menu. 3 On the Menu screen, tap Toolbox. 4 Enter a valid user code to access the toolbox.5 At the Toolbox (1 of 3) screen, tap System History. The log of system events appears. Use the  and  arrows to scroll through the log.6 To choose the events to display, tap Filters.7 Select the events to display with the check boxes. Tap All to select all the check boxes, or None to clear all the check boxes.8 Tap OK when nished.SYSTEM TESTEven though your security system is self-monitoring, it is still important to regularly test the system manually. The System Test is used to test each of the sensors in the system. The master user code is required to test the system. While the system is in test mode, a “T” icon blinks on the upper right of the display.IMPORTANT: Test your Security System weekly to ensure continued protection and proper system operation.To test the system:1 At the Home screen, tap Security. 2 At the Security screen, tap Menu. 3 At the Menu screen, tap Toolbox. 4 To access the system test, enter the master user code.5 At the Toolbox (1 of 3) screen, tap System Test.System Toolbox
Copyright © 2018 Nortek Security & Control 30GC2.5 Wireless Security System | User GuideSensor TestWhen each sensor is tested, the Control Panel does the following: ●Beep sand announces the sensor’s name ●Displays green bar lights by the sensor name ●Displays green signal bars to show the strength of that sensor’s wireless signal.NOTE: Start and stop test reports are sent to the Central Station.1 At the System Test: Console screen, a list of sensors appears. Use the  and  arrows to scroll through the list.2 Go to each sensor listed, and trigger it. ●For door or window sensors, open and close the door or window. ●For motion detectors, stay out of the protected area for ve (5) minutes, then walk through the area. ●For portable sensors and wireless keypads, tap a button. ●For smoke, CO, or glass break detectors, tap the detector’s test button.TIP: When a red bar is displayed for a sensor, the test has failed.3 When all sensors have been tested, tap OK. Then continue with the Panel Test.Panel TestThe panel test checks the Control Panel’s indicators and sounder.1 At the System Test: Console screen, a list of tests to perform on the panel appears. Use the  and  arrows to scroll through the list.2 Tap each button in the list. Then tap Yes or No to respond to the test question.3 After answering all of the questions, tap OK.4 At the System Test Successful screen, tap OK.CHIME SETUPOn doors and windows monitored by sensors, the system can sound a chime to announce that the door or window was opened. Sensors can also be set to have the Control Panel say the name of the opening. TIP: The chime and voice announcements only sound while the system is disarmed.At the time of installation, the installer programs each sensor’s chime option. The person with the master user code can change the chime options for each sensor to further customize the system as desired.TIP: As a global system option, the chimes for all the system’s sensors can be turned on or off using the Chime check box on the Menu screen.System Toolbox
Copyright © 2018 Nortek Security & Control 31GC2.5 Wireless Security System | User GuideTo setup the chime options individually for each sensor:1 At the Home screen, tap Security.2 At the Security screen, tap Menu.NOTE: Select or clear the Chime and Voice check boxes to turn the system chimes and voice announcements ON or OFF (except for alarm voice messages).3 At the Menu screen, tap Toolbox.4 Enter the master user code to gain access to the Toolbox. 5 At the Toolbox (1 of 3) screen, tap Chime Setup. The Chime Setup screen displays each of the installed sensors that can chime and the option currently set for the sensor. To change the sensor’s chime options, tap the sensor button.TIP: There are 14 chime options for each sensor.6 Check the option that you want for the sensor, then tap OK.7 When you are nished, tap Back.ADJUSTING THE BRIGHTNESS/VOLUMEYou can adjust the brightness of the Control Panel’s display and the volume of the system’s speaker that is best suited to your installed system.To set the brightness and volume:1 At the Home screen, tap Security.2 At the Security screen, tap Menu.3 At the Menu screen, tap Toolbox.4 Enter the master user code to gain access to the Toolbox.Chime Option1Disabled2Voice Only3Ding-dong #14Ding-dong with Voice #15Ding-dong #26Ding-dong with Voice #27Ding-dong #38Ding-dong with Voice #39Ding-ding10 Ding-ding with Voice11 Chime #112 Chime with Voice #113 Chime #214 Chime with Voice #2System Toolbox
Copyright © 2018 Nortek Security & Control 32GC2.5 Wireless Security System | User Guide5 At the Toolbox (1 of 3) screen tap Brightness/Volume. You can set the brightness using the top bar. Adjust the level from 1 to 12 using the buttons on each end of the bar.6 You can set the speaker volume for the chimes and announcements on the bottom bar. Adjust the level from 1 to 12 using the buttons on each end of the bar.NOTE: The volume setting does not effect the alarm sounder volume.7 When you are nished, tap OK.ADJUSTING THE BACKLIGHT TIMEOUTThe backlight timeout sets the length of time that the display stays lit after use. You can adjust the backlight to 30 seconds, 1, 2, 5, or 10 minutes, or to always (to light the display at all times).NOTE: To conserve the Control Panel’s backup battery, during an AC power failure, the display goes dark after 30 seconds regardless of this setting.To set the display backlight time:1 At the Home screen, tap Security.2 At the Security screen, tap Menu.3 At the Menu screen, tap Toolbox.4 Enter a valid user code to gain access to the Toolbox.5 At the Toolbox (1 of 3) screen, tap the  arrow.6 At the Toolbox (2 of 3) screen, tap Backlight Time-out.7 Choose one of the display backlight times and tap OK.CLEANING THE TOUCH SCREENThere is a special option for the Control Panel that enables you to clean the touch screen display. The option disables the touch screen for 30 seconds so the display can be cleaned with a dry, soft cloth.To disable the touch screen for cleaning:1 At the Home screen, tap Security.2 At the Security screen, tap Menu.3 At the Menu screen, tap Toolbox.4 Enter a valid user code to gain access to the Toolbox.5 At the Toolbox (1 of 3) screen, tap the  arrow.6 At the Toolbox (2 of 3) screen, tap clean screen.NOTE: The Display Cleaning screen appears for 30 seconds. It shows the time remaining. The touch screen is locked during this time. When the timer expires, the system returns to the Toolbox screen.SET DATE AND TIMEThe Control Panel has a built-in clock and calendar. The Home screen displays the time and date. The time and date are also used for the system history and event logs that store data on system events.NOTE: During installation, your installer can set the system to automatically adjust for daylight saving time if it’s observed in your location.NOTE: The time and date are automatically set through the cellular radio by the Central Station if your Control Panel has a cellular radio installed.System Toolbox
Copyright © 2018 Nortek Security & Control 33GC2.5 Wireless Security System | User GuideTo set the date and time:1 At the Home screen, tap Security.2 At the Security screen, tap Menu.3 At the Menu screen, tap Toolbox.4 At the Toolbox (1 of 3) screen, tap the  arrow.5 At the Toolbox (2 of 3) screen, tap Set Date or Set Time.6 Use the  and  arrows to set the current date or time. Tap OK.7 A conrmation screen showing the date and time set appears. Tap OK.DISPLAY FIRMWARE VERSIONTo troubleshoot your system, you can check the rmware version that has been installed.To display the rmware version:1 At the Home screen, tap Security.2 At the Security screen, tap Menu.3 At the Menu screen, tap Toolbox.4 At the Toolbox (1 of 3) screen, tap the  arrow.5 At the Toolbox (2 of 3) screen, tap Version.6 When nished, tap Back.DEALER INFO SCREEN AND CALL BACK BUTTONYour 2GIG Alarm Dealer may congure the Enter Your Code screen to display contact information for your 2GIG Alarm Dealer or the Central Station.Accessing the Dealer Info ScreenTo access the Dealer Info screen:1 At the Home screen, tap the system logo.2 At the Enter Your Code screen, enter the four (4)-digit master user code.3 The left side of the Enter Your Code screen reveals contact information for your 2GIG Alarm Dealer or the Central Station.Requesting a Service Call BackTo request a service call back:1 At the Enter Your Code screen, a call back button appears at the bottom or the screen.2 Tap the Call Back button to transmit a report to your alarm dealer or the Central Station. When the report is received by the 2GIG Alarm Dealer or Central Station, you will receive a call back in accordance with the terms of your dealer’s service agreement. For additional information about call backs, consult your 2GIG Alarm Dealer.System Toolbox
Copyright © 2018 Nortek Security & Control 34GC2.5 Wireless Security System | User GuideINSTALLER PROGRAMMED OPTIONSThe installer can program different options to customize the installation. The options listed below show the default settings and a check box or area to denote custom settings.Siren Run TimeIf there is a burglary, panic (police), or emergency alarm, the Control Panel sounds the siren for a preset time. After the time expires, the siren will stop sounding. (Auxiliary alarms run for an unlimited time.)Four Minutes is the default, or the following: 8 Minutes 12 Minutes 16 Minutes UnlimitedSensor Trigger LimitThe system limits the number of times a sensor can re-trigger an alarm while the system is armed. The setting is 1 to 6 times per sensor, per arming period.Two Triggers is the default, or the following: 1 Trigger 3 Triggers 4 Triggers 5 Triggers 6 TriggersFire Horn Run TimeIf there is a re or carbon monoxide alarm, the Control Panel sounds the re alarm horn for a preset time. After the time expires, the re alarm horn will stop sounding.Four Minutes is the default, or the following: 8 Minutes 12 Minutes 16 Minutes UnlimitedExit DelayThe Exit Delay begins immediately after arming the system. The delay gives you time to leave through the designated exit/entry door without setting off the alarm. During the Exit Delay beeps sound, and faster beeps sound during the last 10 seconds.NOTE: Arming remotely does not start an Exit Delay. ●60 Seconds is the default, or ________ For ________ Door.Entry DelayThe Entry Delay begins when the designated entry/exit door is opened while the system is armed. The delay gives you time to disarm the system before triggering the alarm. You must enter a valid user code on the Control Panel or Wireless Keypad before the Entry Delay time expires. During the Entry Delay, beeps sound to remind you to disarm the system.The system supports two different Entry Delays: ●Entry Delay #1 is for your primary entrance door ●30 Seconds is the default, or _________Entry Delay #2 is for a secondary entrance (such as a garage door) and is usually set longer to give you time to get to the keypad and disarm the system.45 Seconds is the default, or _________ For ________ Door24-Hour Emergency FunctionsThe system can be congured to display three 24-hour emergency buttons on the Control Panel: Panic, Fire, and Emergency. The installer can set which emergency buttons on the Control Panel are active. Panic (Audible) Panic (Silent) Fire Emergency
Copyright © 2018 Nortek Security & Control 35GC2.5 Wireless Security System | User GuideQuick ArmingQuick Arming allows you to arm your system without having to enter a user code. When you tap the Stay or Away button, the system will start to arm without requesting a user code. ●Off ●OnQuick BypassNormally sensors that are open at the time the system is armed will require force bypassing by entering your user code. The system can be set so a user code is not required to bypass open sensors when the system is armed. ●Off ●OnQuick ExitThe Quick Exit option allows you to start the Exit Delay while the system is armed. This allows you to leave the premises without having to disarm and rearm the system. When the Quick Exit option is on, a Quick Exit button will display on the Security screen. Tap the button to start the Exit Delay.After Quick Exit, the system will fully re-arm in the mode that it was in before (Stay or Away mode). ●Off ●OnAuto Un-bypassNormally, sensors manually bypassed with the User Toolbox will automatically have their bypasses removed when the system is disarmed. The system can be set so sensors that have been manually bypassed will stay bypassed until the bypass is manually removed. ●Off ●OnAuto StayThe Auto Stay option will change the arming mode if no one exits after arming the system in Away mode. When the system is armed in the Away mode the Exit Delay will begin. With the Auto Stay option on, if a designated exit/entry door does not open and close during the Exit Delay, the system will arm in the Stay mode instead of the Away mode. ●Off ●OnKey Fob SoundThe system can be set so when it is armed or disarmed by a wireless key fob, a beep will sound through the internal and external sounders to indicate that the key fob’s signal was received. This helps in installations where the Control Panel is not visible or there are no other system status indications at the key fob’s location. ●Off ●OnKey Fob Disarm After SoundThe system can be set so that when it is disarmed with a wireless key fob after an alarm has occurred, a special series of beeps will sound through the internal and external sounders. This option serves as an alert to warn you to approach the premises with caution as an intruder may still be present. ●Off ●OnKey Fob OptionsThe installer selects which options are enabled for each key fob (1-8) used with the system. Refer to the table below for the options selected for your key fobs:Key Fob Arming Bypass OptionsOption 1 2 3 4 5 6 7 8Arm without Exit DelayAllow key fob disarmingEnable key fob auxiliary keyAuxiliary AlarmAudible AlarmSilent Panic AlarmFire AlarmEmergency Keys DisabledOption All Key PadsAuto-bypass all open perimeter sensors and un-bypass a sensor if closed while the system is armedAuto-bypass open perimeter sensors permanently while armedAllow key fob arming only when all perimeter sensors are closedSystem Toolbox
Copyright © 2018 Nortek Security & Control 36GC2.5 Wireless Security System | User GuideWireless Keypad Emergency KeysEach standard wireless keypad has Fire and Police emergency buttons that can be enabled or disabled for each keypad. Refer to the table below for options set for your keypads:Exit Delay RestartThe Exit Delay Restart option will extend the Exit Delay one time if you need to re-enter the premises. When the system is armed in the Away mode or Stay mode, the Exit Delay gives you time to leave without setting off the alarm. With the Exit Delay Restart option, re-entering the premises after you have left, but before the Exit Delay timer expires, will restart the Exit Delay timer, giving you the full length of time to leave again. The restart option only works once, each time the system is armed. ●Off ●OnCancel DisplayA “cancel” message will be sent to the Central Station if the system is disarmed within a preset period of time after an alarm is triggered. The system can be set to display that a cancel report was sent, or for higher security, the system can be set not to display the cancel message. ●Off ●OnCancel TimeTo limit responses to false alarms, a “cancel” message will be sent to the Central Station if the system is disarmed within a preset period of time after an alarm is triggered. The alarm report is always sent, but it will be followed by a cancel report if you disarm the system within the preset time.This option helps the Central Station to determine whether you accidentally caused the alarm or if the alarm was caused by an intruder. It also lets the Central Station know that you have returned to the premises. Even if a cancel message is sent, the Central Station will verify the alarm and possibly dispatch help. The cancel message may be processed by the Central Station at a later time depending on system programming. ●Five Minutes is the default, or _______ MinutesDialer DelayIf an alarm occurs, the system will delay dialing for a short time to allow you to disarm the system in case the alarm was accidentally tripped. The dialer delay reduces nuisance trafc to the Central Station and can prevent receiving nes that many cities impose when police respond to a false alarm. Your installer also can program the system for no dialer delay.NOTE: The dialer delay is also known as the abort window. It gives you time to disarm, but doesn’t delay the siren from sounding. Disarming during the abort window can display a cancel message depending on the Cancel Display setting (see "Cancel Display"). ●30 Seconds is the default, or ______ Seconds.2-Way VoiceThe system can connect with a Central Station operator so they can converse with people on the premises after an alarm. The 2-way voice option allows communication to and from the Control Panel and the Central Station. 2-way voice communications will occur after the system has made its alarm report. Your installer sets which sensors can trigger the 2-way voice option. ●Off ●OnOption 1 2 3 4Emergency Keys EnabledEmergency Keys DisabledSystem Toolbox
Copyright © 2018 Nortek Security & Control 37GC2.5 Wireless Security System | User GuideINSTALLER SPECIFIC INFORMATIONUser CodesMaster UserUser 2User 3User 4User 5User 6User 7User 8User 9User 10User 11User 12User 13User14User 15User 16User 17User 18User 19User 20User 21User 22User 23User 24User 25User 26User 27User 28User 29User 30User 31User 32User 33User 34User 35User 36User 37User 38User 39User 40User 41User 42User 43User 44User 45User 46User 47User 48User 49User 50User 51User 52User 53User 54User 55User 56User 57User 58User 59User 60IMPORTANT: If you have logged user codes here to maintain security, keep this guide in a secure location!
Copyright © 2018 Nortek Security & Control 38GC2.5 Wireless Security System | User GuideZonesZones Wireless Protection Zones (1-48)123456789101112131415161718192021222324252627282930313233343536373739404142434445464748Zones Hardwired Zone (49)49Keyfobs (51-58)5152535455565758Keypads (59-62)59606162Wireless Protection Zones (63-74)636465666768697071727374Duress (92)92Fire (95)95Medical (96)96Police Panic (99)99Installer Specific Information
Copyright © 2018 Nortek Security & Control 39GC2.5 Wireless Security System | User GuideSERVICE INFORMATIONYour local Alarm dealer is the person best qualied to service your alarm system. Be sure to set up a routine service schedule with your local Alarm installer.
Copyright © 2018 Nortek Security & Control 40GC2.5 Wireless Security System | User GuideREGULATORY INFORMATIONWireless Product NoticeRadio controls provide a reliable communications link and ll an important need in portable wireless signaling; however, there are some limitations which must be observed.For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as Part 15 devices. As such, they have limited transmitter power and therefore limited range.A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio signals that occur on or near their operating frequencies, regardless of code settings. ● Changes or modications to the device may void FCC compliance. ●Infrequently used radio links should be tested regularly to protect against undetected interference or fault. ●A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale distributor or dealer, and these facts should be communicated to the end users.FCC NoticeThis equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Relocate,the Console away from the TV/radio receiver. ●Plug the Console into a different wall outlet so that the Console is on a different branch circuit. ●Reorient the TV/radio antenna. ●If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions.
Copyright © 2018 Nortek Security & Control 41GC2.5 Wireless Security System | User GuideIMPORTANT NOTICEALARM SYSTEM LIMITATIONSThis security system can not offer guaranteed protection against burglary, re, or other emergencies. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of reasons. For example: ●Intruders may gain access through unprotected openings or have the technical sophistication to bypass an alarm sensor or disconnect an alarm warning device. ●Intrusion detectors (sensors) do not work without power. Battery operated devices do not work without batteries, with dead batteries, or if the batteries are not put in properly. Devices powered solely by AC do not work if their AC power supply is cut off for any reason, however briey. ● Signals sent by wireless sensors may be blocked or reected by metal before they reach the alarm Control Panel, even if the signal path has been recently checked during a weekly test. Blockage can occur if a metal object has been moved into the sensor’s signal path. ●A user may not be able to reach a panic or emergency button quickly enough. ● Even if the system responds to the emergency as intended, however, occupants may have insufcient time to protect themselves from the emergency situation. In the case of a monitored alarm system, authorities may not respond appropriately. ●Alarm warning devices such as sirens, bells or horns may not alert people or wake up sleepers if they are located on the other side of closed or partly open doors. If warning devices sound on a different level of the residence from the bedrooms, then they are less likely to waken or alert people inside the bedrooms. Even persons who are awake may not hear the warning if the alarm is mufed from a stereo, radio, air conditioner, or other appliance, or by passing trafc. Finally, alarm warning devices, however loud, may not warn hearing-impaired people or awaken deep sleepers. ● While smoke detectors have played a key role in reducing residential re deaths, they may not activate or provide early warning for a variety of reasons in as many as 35% of all res, according to data published by the Federal Emergency Management Agency. Some of the reasons smoke detectors used in conjunction with this system may not work are where smoke cannot reach the detectors, such as in chimneys, in walls, or roofs, or on the other side of closed doors. Smoke detectors may have been improperly installed and positioned. Smoke detectors may not sense res that start where smoke cannot reach the detectors, such as in chimneys, in walls, or roofs, or on the other side of closed doors. Smoke detectors also may not sense a re on another level of a residence or building. A second oor detector, for example, may not sense a rst oor or basement re. Moreover, smoke detectors have sensing limitations. No smoke detector can sense every kind of re every time. In general, detectors may not always warn about res caused by carelessness and safety hazards like smoking in bed, violent explosions, escaping gas, improper storage of ammable materials, overloaded electrical circuits, children playing with matches, or arson. Depending upon the nature of the re and/or the locations of the smoke detectors, the detector, even if it operates as anticipated, may not provide sufcient warning to allow occupants to escape in time to prevent injury or death. ●This equipment, like other electrical devices, is subject to component failure. Even though this equipment is designed to last as long as ten years, the electronic components could fail at any time. The most common cause of an alarm system not functioning when an intrusion or re occurs is inadequate maintenance. ●Although, installing an alarm system may make homeowners eligible for lower insurance rates, an alarm system is not a substitute for insurance. Homeowners, property owners, and renters should continue to act prudently in protecting themselves and continue to insure their lives and property.Panel Operating ConditionsFor optimal performance, the Control Panel should be operated under the following conditions: ●Operating Temperature 0°C to 49°C (32°F to 120°F) ●Humidity 0 – 90% Non-condensing
Copyright © 2018 Nortek Security & Control 42GC2.5 Wireless Security System | User GuideLIMITED WARRANTYThis Nortek Security & Control LLC product is warranted against defects in material and workmanship for one (1) year. This warranty extends only to wholesale customers who buy direct from Nortek Security & Control LLC or through Nortek Security & Control LLC’s normal distribution channels. Nortek Security & Control LLC does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or liabilities on the part of Nortek Security & Control LLC for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of property, revenue, or prot, or cost of removal, installation, or reinstallation. All implied warranties for functionality, are valid only until the warranty expires. This Nortek Security & Control LLC Warranty is in lieu of all other warranties expressed or implied.For warranty service call your local alarm installation and service professional shown on the back cover of this User Guide.Covered by one or more claims of patents: http://sipcollc.com/patent-list/ and http://intusiq.com/patent-list/.
10022313 X4 Copyright © 2018 Nortek Security & Control www.nortekcontrol.com435919 Sea Otter Place, Suite 100Carlsbad, Ca. 92010(800) 2GIG-TECHYOUR LOCAL ALARM AND SERVICE PROFESSIONAL:

Navigation menu