OKAYO Electronics DLR-9 Digital receiver User Manual DLR 9x

Download:
Mirror Download [FCC.gov]
Document ID	4158609
Application ID	z0kYxG+RMKlH/SkuDaqXNQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	103.29kB (1291071 bits)
Date Submitted	2019-02-01 00:00:00
Date Available	2019-02-01 00:00:00
Creation Date	2018-08-16 10:03:03
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2019-01-31 11:32:33
Document Title	Microsoft Word - Users Manual_DLR-9.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Sam

Wireless receiver DLR-9

Figure 1








Interface
 Power and volume knob of channel A
  (Up) /  (Down) button
 Sync button
 Power and volume knob of channel A
 Display, figure 1
a. Talk/Mute status of channel A
b. Battery status of channel A
c. Signal status of channel A
d. Channel number of channel A
e. Channel number of channel B
f. Signal status of channel B
g. Battery status of channel B
h. Talk/Mute status of channel B
i. Sound quality preset
Operation
1. Switch on the module with the knob of channel A first. Then, follow same operation to switch on
channel B, if necessary. Adjust volume of channel properly with same knob.
2. Previously selected channel number shows up. To change the channel, press and hold the button 
for 1 second to until backlit screen turns to white and number of channel A flashes. Then, press
button  or  to select another preferred number of channel A. The newly selected channel will
automatically be confirmed after being idled for 2 seconds. Then, flashing indication will come to
channel B. Follow same operation to have preferred number of channel B.
3. To check specific frequency of channel A or B, simply short press button  (A) or  (B). The receiver
module will come back to home screen after being idled for 2 seconds.
4. Switch off the module counterclockwise with the knob of channel A.
Channel sync
1. Press button SYNC when the module is on.
2.
shows up on channel A and the module starts to look for a clean channel A (appr. 10 seconds)
until number
shows up. For the time being, turn 1st transmitter on within 20 seconds for pairing.
3. After 1st transmitter is paired,
will then show up on channel B. Now, repeat step 2 and 3 to get
nd
2 transmitter paired.
4. When 2 transmitters finish the pairing, the module will return to home screen automatically.
Setting menu
1. Press and hold both buttons  and power simultaneously to turn the receiver module on.
2. “Setting” mode will be entered successfully for custom adjustments.
Wireless receiver DLR-9
3. Press button  or  to scroll options. See setting menu below.

Quality: This refers to sound quality of the receiver and channel quantity will vary upon different
quality.
 HQ: Higher
 Q (default): Regular

Squelch: This refers to signal quality of the receiver. The better the signal quality, the shorter the
operation range.
 Hi: Operation range will be shorter.
 Lo (default): Operation range will be greater.

Pair mode: Only Sync (default) is available.

Exit
4. Press the button SYNC again to confirm the selection and leave the setting.
5. To leave the SETTING mode, find “EXIT” on the menu and press the button SYNC.
Manufacturer’s Declaration
This product meets the following standards:

Federal Communications Commission Interference Statement
1. This Transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Wireless receiver DLR-9

Europe – EU Declaration of Conformity
This device complies with Directive 2014/53/EU issued by the Commission of the European Community.

WEEE Statement
Electrical and electronic equipment must be disposed
of at the end of their lifespan separately from household waste.
Please dispose of this equipment at your local waste collection
Or recycling center. Please help to protect our environment.

Safety and Electromagnetic Emissions Certificates
Standard Compliance
 RoHs compliant
 European Directive 2011/65/EU
Certificates
 CE
 FCC

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Sam
Create Date                     : 2018:08:16 10:03:03+08:00
Modify Date                     : 2019:01:31 11:32:33+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Sam
Title                           : Microsoft Word - Users Manual_DLR-9.docx
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2019:01:31 11:32:33+08:00
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:db7d0698-d4c4-4ed4-a857-7bdb233c9b35
Instance ID                     : uuid:9b338d63-7afa-4a25-ae48-ad7a393a3831
Page Count                      : 3

EXIF Metadata provided by EXIF.tools