OKIN Refined Electric Technology CB1120 Control Box User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3449091
Application ID	XA6dT0MyvgBU8Eq/oisS+w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.92kB (361507 bits)
Date Submitted	2017-07-04 00:00:00
Date Available	2017-07-04 00:00:00
Creation Date	2017-06-16 10:42:38
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2017-07-03 22:40:50
Document Title	Microsoft Word - CB.11.20.01产品说明书.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	baclsh67

Issue department：Bedding Division
ProductFunction
instruction
Date：
Author：
2017-05-03
Kyle
No：CB1120
Version：
1.1
Page 1 of 4
CB.11.20.01
CB1120Function instruction
1. Electrical configuration diagram：
2. Function Picture
Pair&Power Cord DC
Power Cord AC
Power Supply
(JLDP.10.023.000)
Control Box
SYNC.
Remote model
(RF2005)
R5.504.01.250
Power Cord AC
JLDP.10.023.000
Power Supply
R5.217.01.013
Pair&Power Cord DC
Synchronization Cable
Control Box
RF2005
Motor/(Head&Foot)
Remote model
Head
Foot
Motor
CB1120
Issue department：Bedding Division
ProductFunction
instruction
2017-05-03
Kyle
No：CB1120
Version：
1.1
Page 2 of 4
CB.11.20.01
1.
Date：
Author：
Process of test
1.1. HEAD MOTOR
Connect to head actuator,control by remote single:
Click head up button on the remote, head actuator moves out, stop when released；
Click headdown button，head actuator moves in, stop when released；
This function takes effect only by pressing the corresponding button on the remote.
1.2. FOOTMOTOR
Connect to foot actuator,control by remote single:
Click foot up button，foot actuator moves out，stop when released；
Click foot down button，foot actuator moves in，stop when released；
This function takes effect only by pressing the corresponding button on the remote.
1.3. SYNC port
Connect with the same other Control box or Other accessories;
1.4. Power LED& PAIRING LED
Power supply for control box, PAIRINGLED of control box is blue,POWER LEDis green。
1.5. Power
Connect to the 29V DC;
1.6. RESET button
Press and hold the RESET button，the Head, Foot actuators will moves to lower position.
Issue department：Bedding Division
ProductFunction
instruction
Date：
Author：
2017-05-03
Kyle
No：CB1120
Version：
1.1
Page 3 of 4
CB.11.20.01
1.7. Pair Function
Double click RESET button，pairing LED turns on，the control box enters into mode of code paring；
Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the
remote enters into mode of code paring;
The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that
the code paring is successful;
If fails, repeat all the processes above;
1.8. FLAT function
Press and release the FLAT buttonon remote，the head and foot actuators moves to lower position(when the
actuator is free, can turn off the vibration motor and turn off the indicator light when press once )，stop when
press any buton；
This function takes effect only by pressing the corresponding button on the remote.
1.9. ZERO G position function
Press and release ZERO G button on remote，the head and foot actuator moves to preset memory position，stop
when press any button；
This function takes effect only by pressing the corresponding button on the remote.
Issue department：Bedding Division
ProductFunction
instruction
Date：
Author：
2017-05-03
Kyle
No：CB1120
Version：
1.1
Page 4 of 4
CB.11.20.01
FCC：
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Innovation,Science and Economic Development Canada licenceexempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio
exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : baclsh67
Create Date                     : 2017:06:16 10:42:38+08:00
Modify Date                     : 2017:07:03 22:40:50-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : baclsh67
Title                           : Microsoft Word - CB.11.20.01产品说明书.docx
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:07:03 22:40:50-07:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:7eaa570f-5462-4273-aa34-62e827b1a1bd
Instance ID                     : uuid:da871d5a-dcd1-45d5-beb1-f9db5c72b606
Page Count                      : 5

EXIF Metadata provided by EXIF.tools