OMNIKEY CM5125 Inductive TAG-Reader User Manual
OMNIKEY GmbH Inductive TAG-Reader Users Manual
OMNIKEY >
Users Manual
Prox Smart Card Reader Technology CardMan® 5125 User's Manual CardMan 5125 User's Manual English If you have any technical problems or other questions please contact our help desk: support@omnikey.com For latest drivers, visit our homepage: http://www.omnikey.com Copyright © OMNIKEY 2005 (May 2005) Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained in this document is subject to change without notice User's Manual - English Introduction This manual describes the physical behaviour, short data sheet and conformities of OMNIKEY's CardMan 5125, a combined contact and contactless smart card reader. To install your CardMan 5125 please follow the steps as described in the “CardMan 5125 Installation Guide”. If you are developing applications using CardMan 5125, please refer to the “CardMan 5125 Developer’s Guide”. For other detailed informations please contact the OMNIKEY support: support@omnikey.com Box content • Smart Card Reader with fixed USB cable. • This manual The required drivers for operating your reader can be found in the internet at http://www.omnikey.com Overview The CardMan 5125 is a dual interface PC-linked reader that reads 125Khz Prox (RFID) contactless smart cards and virtually any contact smart card. The dual interface feature economically supports end-user environments where both contactless and contact smart card technology may be in use. The CardMan 5125 is a USB plug and play device. The USB cable is fixed to the reader. To connect the reader with your PC, plug the USB connector to an unused USB port of your computer. When the reader is working the LED on the right is lighting up green. If the reader is not working consult the “CardMan 5125 Installation Manual” for driver setup. For using a contact card, put the card with the contacts facing up, in the reader. For contactless operation, hold the card next to the logo on top of the reader. When the reader is exchanging data with the card (reading or writing) the LED on the right is blinking red. Prox Smart Card Reader CardMan 5125 User's Manual - English Short Data Sheet Dimensions Weight (including standard base and adapter) Operating temperature Operating humidity Composition PC Connector cable Contact Interface Durability Meantime between failure (MTBF) Host Interface Host Data Transmission speed Power supply 80 mm x 67 mm x 28 mm (3.15" x 2,64" x 1,1") 190 gr (6.7 oz.) 10-55°C (50-131°F) 10-90% rH ABS 180 cm (6ft) 100,000 Insertions 500,000 Hours USB 2.0 CCID (also supports 1.1) 12 Mbps (USB 2.0 Full Speed) Bus powered Conformance Information CE Marking The shipped version of this device complies with the requirements of the directives 89/336/EWG, 73/23/EWG and 1999/5/EG. FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RFID Smart Card Reader CardMan 5125
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2005:06:02 10:14:41 Subject : Producer : Jaws PDF Creator, Word macro v3.00.16 Author : ct Title : Creator : Microsoft Word 9.0 Modify Date : 2005:06:10 10:50:31+02:00 Page Count : 3 Page Mode : UseNone Has XFA : NoEXIF Metadata provided by EXIF.tools