OPTOELECTRONICS CRD3301 Charging/Communication Cradle User Manual Users manual
OPTOELECTRONICS Co., Ltd. Charging/Communication Cradle Users manual
Users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1083177 |
| Application ID | z4fpY+QxNdigQJkMRGyPJg== |
| Document Description | Users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 59.13kB (739086 bits) |
| Date Submitted | 2009-03-20 00:00:00 |
| Date Available | 2009-03-20 00:00:00 |
| Creation Date | 2009-01-16 10:58:01 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2009-03-17 17:04:31 |
| Document Title | Microsoft Word - SS08ｘｘｘ_CRD-3301_1_ENG 08.11.06.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | abem |
CRD-3301 SS08xxx Master Specifications Charging / Communication Cradle Product Name CRD-3301 Specification No T.B.D Edition Initial Date of Publication T.B.D Original Doc. No. T.B.D OPTOELECTRONICS Co., Ltd. 4-12-17 Tsukagoshi, Warabi-shi, Saitama, 335-0002 Japan TEL: 81+(0)48-446-1183 FAX: 81+(0)48-446-1184 CRD-3301 SS08xxx Revision History Specification No.: T.B.D Product name : CRD-3301 Revision Date Section Description of Changes Initial T.B.D CRD-3301 SS08xxx Table of contents 1. Abstract ·····································································································1 2. Overview ···································································································1 3. Basic Specifications···················································································2 4. Bluetooth ···································································································4 5. Detailed View·····························································································5 6. Electrical Specifications ·············································································6 7. DIPSW configurations ···············································································7 8. Cable Interface ··························································································8 9. Interface Cable ························································································15 10. Default Setting ·······················································································15 11. Serial Label····························································································16 12. Packaging Specifications·······································································17 13. Environmental Specifications·································································17 14. Reliability ·······························································································18 15. Warranty ································································································18 16. Regulatory Compliance ·········································································19 17. RoHS·····································································································20 18. Precautions ···························································································20 19. Bluetooth ·······························································································21 20. Frequency Band ····················································································21 Appendix. Mechanical Drawing ···································································22 CRD-3301 SS08xxx 1. Abstract This manual provides the specifications for the charging / communication cradle, CRD-3301. 2. Overview CRD-3301 is the dedicated charging / communication cradle for the laser handy scanner, OPR-3301. Followings are the features of the CRD-3301: ・CRD-3301 receives data from OPR-3301 via ver.2 compliant Bluetooth interface. ・The cradle can output the received data via RS232C or USB interface. ・OPR-3301 can be charged by placing it on the CRD-3301. ・RoHS – CRD-3301 is compliant with RoHS. (However, it is assessed by Optoelectronics Co., Ltd. and it does not have any legal weight in the EU.) CRD-3301 SS08xxx 3. Basic Specifications Control Section Item CPU Clock frequency Specification 16bit CMOS CPU 12.00MHz Remark FLASH ROM 256KB For BIOS/DATA Communication Section RS-232C: 600bps to 57.6kbps Interface USB: 2.0 HID compliant 2400MHz to 2483.5MHz Bluetooth Ver2.0 compliant Class 2 (4dBm or less) Installed SPP Communication range 10m The distance may vary depending on the environment. Baud rate 57.6kbps Antenna 1/4λ (surface mounted) Indication LED Power: red (far left) Power feeding Section For charging a scanner O u t p u t : D C 6 V ( t yp . ) T er m i n a l : + / - / P o we r s u p p l y c o n t r o l Operation voltage range 5.7 to 6.3V Dedicated AC adapter: 6.0V±5% Standby 90mA or less Without charging Max. 1000mA With charging Wireless section Frequency Specification Transmission power Main power section Consumption current CRD-3301 SS08xxx Environment specifications Operation Storage Operation Storage Drip proof 0 to 40% -20 to 60% 25 to 85% 20 to 90% Increased the frequency of vibration from 10Hz to 100Hz at an accelerated velocity of 19.6m/s (2G) for 6 minutes each in X-direction, Y-direction and Z-direction. Repeated this test for 10 times in each direction. Dropped from a height of 75cm onto a concrete surface. The drop test is done for each side (right, left, front, back, top and bottom). Not tested EMI/RFI VCCI/EN55022/FCC Part15, B Temperature Humidity Frequency Drop test No frost, no condensation No frost, no condensation For residential, commercial and light-industrial environments Regulatory compliance CE marking Product safety IEC/EN 60950-1 EMC Resistance to static electricity Immunity test Fast Transient Surge EN55024 (EN61000-6-1) Class-B No destruction No malfunction Voltage Pulse Frequency Pulse Voltage Power supply frequency magnetic field Voltage dip, momentary voltage drop, etc. Frequency Level Dip 1 Dip 2 Momentary drop Physical features Dimensions Weight Air discharge: 15kV (Impressed static electricity of 15kVfor 50 times on the surface of the scanner) Contact discharge (direct/indirect): ±8kV Air discharge (direct) : ±8kV Alternating-current Input Cable: ± 1kV 5/50ns (Tr/Tw) 5kHz 1.2/50μs (Tr/Th) From L to P:± 2 kV (closed-loop voltage) From L to L:± 1 kV (closed-loop voltage) 50, 60Hz 3A/m Drop 30%, 0.5 cycles Drop 60%, 5cyccles > Drop 95% ,250 Cycles Model name AC adapter Output Condition: IEC61000-4-2 compliant Condition: IEC61000-4-4 compliant Condition: IEC61000-4-5 compliant Condition: IEC61000-4-8 compliant Condition: IEC61000-4-11 compliant Approx. 100 (W) × 185 (D) × 78 (H) 250g (max.) Input For residential, commercial and light-industrial environments Voltage range Supply current SFP0602000P-PSE AC 90 to 264V 0.5A max Voltage range 5.7 to 6.3V Maximum current 2A max Excluding the AC adapter (Integrated plug) * This chart contains the sections which state about the combination of CRD-3301 and OPR-3301. CRD-3301 SS08xxx 4. Bluetooth CRD-3301 uses Bluetooth as a wireless interface. Blue tooth is compliant with ver.2.0 and supports SPP (Serial Port Profile). ・ Supported Protocol Stack - RF (Radio Frequency Protocol) - BB (Base Band Protocol) - LM (Link Manager Protocol) - L2CAP (Logical Link Control and Adaptation Protocol) - SDP (Service Discovery Protocol) - RFCOMM (emulation for RS-232C) ・ Supported Profile - GAP (Generic Access Profile) - SPP (Serial Port Profile) ・ Communication Configuration 1 to 1 One scanner to one host system ・ Scanner operating mode while connected to the host system - Scanner (OPR-3301): Master mode - Cradle (CRD-3301): Slave mode ・ Security Mode Authentication enabled ・ Encryption Encryption enabled CRD-3301 SS08xxx 5. Detailed View Figure1: Detailed view No. Items Wireless communication status LED Communication status LED Power Supply Status LED Power supply terminal (-) Power supply terminal (+) Scanner control terminal Scanner detection switch Scanner search button Barcode for BD address setting 10 11 12 13 14 Dip switch Serial label DC Jack USB connector Modular jack Specifications Indicates operational status such as whether Bluetooth communication is connected. LED to indicate the interface and data transmission status. LED to indicate the power supply status Negative power supply terminal for the scanner (OPR-3301). Positive power supply terminal for the cradle (OPR-3301). Terminal to transfer the kind of power (AC adapter / USB bus power). Switch to detect if the scanner (OPR-3301) is set on the cradle. Press the button when the scanner is missing. As long as the connection is established, the scanner answers via buzzer. Scan the barcode with the scanner(OPR-3301) to set the connection. Dip switch for function settings Power supply jack for the dedicated AC adapter. USB connector for the USB interface cable. Connector for the RS232C interface cable. CRD-3301 SS08xxx 6. Electrical Specifications 6.1. Configurations of CRD-3301 CRD-3301 is the dedicated cradle for OPR-3301 scanner which is able to charge and communicate with the scanner. This product consists of a power supply section which uses Bluetooth interface, power section which is in charge of power feed and voltage conversion for the scanner. CRD-3301 can be operated by AC adapter or USB bus power, however, AC adapter is prior to USB bus power and USB power is disabled in the scanner when both power supplies are used at the same time. Figure2: Detailed view 6.2. Consumption Current Item When stand-by When communicating with a host computer When charging a scanner Measurement conditions: Power supply voltage Specifications USB* 90mA or less RS-232C 90mA or less Conditions Bluetooth communication: OFF 120mA or les 120mA or less Bluetooth communication: ON 1000mA or less 500mA or less Bluetooth communication: ON 6.0V 5V * Followings cannot be used as power supply and AC adapter needs to be used. ・The maximum current of USB interface is 100mA. ・The device which maximum current is 500mA, however, it uses USB hub. 6.3. LED Indication These LEDs shown below notify operational status. LED Power LED Communication LED Wireless LED Location Far left Middle Far right Color Red Green Red Blue Function Lights when power ON. Lights during data transmission. Lights during data reception. Lights when Bluetooth succeeds in connection. Blinks when Bluetooth fails in connection. LED blinking cycle LED Location Communication LED Middle Wireless LED Far right Color Green Red Blue blinking cycle 200mS 500mS 500mS CRD-3301 SS08xxx 7. DIPSW configurations Following functions can be set by DIPSW as shown. DIPSW No. DIPSW1 DIPSW2 DIPSW3 DIPSW4 DIPSW5 DIPSW6 Note: Function Make sure the it is always OFF when using the cradle. This will be used for feature expansion. Enables inquiry scan withiout security Connection can be made witout authentication. Disables protocol while in connection. The menu allows the cradle to connect to bluetooth devices including OPR-3301. Disable DTR signakl detection for the host. Sets the cradle to the default. (Sets the contents of FLAH ROM to the initial setting.) It is normally OFF. When it is ON, *“software update mode” operates * With in this mode, software is rewitten via RS232C interface. 1. All DIPSWs are available when power ON. 2. In the default setting, SW6 is ON, rest of them are OFF. How to set DIPSW Setting SW1 N/A NO SECURITY NO PROTOCOL IGNORE DTR INITIAL SETUP DOWNLOAD MODE SW2 ON DIPSW SW3 SW4 ON ON X : Don’t Care ON Figure3: Location of DIPSW SW5 OFF OFF OFF OFF ON SW6 OFF OFF OFF OFF OFF ON CRD-3301 SS08xxx 8. Cable Interface CRD-3301 supports RS232C and USB HID interfaces. The cradle recognizes the interface whilst watching its power supply. * When changing an interface, turn OFF the power and change the setting for access point of the scanner and read the BD address. Otherwise it may cause malfunctions such as connection and data transmission failure. 8.1. RS232C Interface 8.1.1. Signal Level Signal name IN/OUT TXD OUT RXD IN RS-232C Level (V) Mark/OFF Space/ON -5 to15 +5 to +15 -3 to15 +3 to +15 RTS OUT -5 to -15 +5 to +15 CTS IN -3 to -15 +3 to +15 DSR IN -3 to -15 +3 to +15 8.1.2. Signal Level PIN NO. 10 Signal name Remark RTS Flow control output CTS Flow control input TXD Transmission data to host RXD Transmission data from host NC Not connected GND NC DSR Not connected For detecting interface connection NC Not connected NC Not connected FG 8.1.3. Connector Used 10-pin, modular jack CRD-3301 SS08xxx 8.1.4. Interface Circuit Figure4: Interface circuit 8.1.5. Character Format Figure5: Character format 8.1.6. Communication Format Figure6: Communication format 8.1.7. Communication Control By reading menus listed below enables the cradle to communicate with host computer. Settings information is sent from the scanner. BUSY/READY and P5 are set as default. Handshaking No hand shake Busy/Ready Modem ACK/NAK ACK/NAK No response Menu / command P0 P1 P2 P3 P4 CRD-3301 SS08xxx a) No hand shaking The scanner attempts the communication regardless of the state of the host computer. Flow control is not executed for the Bluetooth interface. For the scanner (OPR-3301), RTS is always enabled. Figure7: No Handshaking b) BUSY/READY The scanner and the host computer notify each other of their state and whether they can receive data with BUSY/READY through an RTS line. They can communicate state to each other through a CTS line when connected as in the following figure. Flow control is executed for the Bluetooth interface. Figure8: BUSY/READY The cradle stays ON (is able to receive data) except while it is transmitting data via IrDA or RS-232C interfaces. The cradle checks the CTS line before transmitting data. When it is ON, the cradle transmits data. When it is OFF, the cradle waits for it to turn ON within a set time. When the CTS line is not ON within a specified period, the cradle will blink the red LED to indicate it. The Flow Control timeouts are as follows, and the default setting is “indefinitely“ (I0). 10 CRD-3301 SS08xxx Flow Control Time Out Indefinitely (default) 100msec 200msec 400msec Menu / Command I0 (Indenfinitely) I1 I2 I3 Figure 9: Cannot receive command CTS / TXD Signal Timing When the CTS line (RTS signal of the host) is turned OFF while sending a TxD signal, the scanner transmits one character and waits. When the CTS signal is turned ON while transmitting a character, the character will be transmitted. Figure 10: Signal timing Note: When using loopback (wire connection) for RTS, CTS line of the scanner in this setting, No handshake is not enabled. 11 CRD-3301 SS08xxx c) Modem The scanner turns CTS line ON before transmitting data. Other processes are the same as BUSY/READY. Figure 11: Hand shaking modem mode d) No ACK/NAK After data has been transmitted, the cradle transmits ACK to the host to notify the transmission status on the wireless communication line. * Between the cradle and the host: No control. * Between the cradle and the host: No control ACK/NAK Protocol Data Transmission Status OK NG Control Level Scanner and Host Notes Regardless of the host status. Cradle Center LED: Green Light Blinks Scanner Green Light with GR Buzzer ACK Transmission None Receive ACK Red Light with NG Buzzer None Receive Timeout * Between the cradle and the host: BUSY/READY or MODEM. ACK/NAK Protocol CTS Line Status OK NG Control Level Scanner, Cradle and Host Notes Monitors CTS line of the host. Cradle Center LED: Green Light Blinks Scanner Green Light with GR Buzzer ACK Transmission Center LED: Red Light Blinks Receive ACK Red Light with NG Buzzer None Receive Timeout 12 CRD-3301 SS08xxx e) ACK/NAK After the data transmission, the cradle expects to receive one of the following responses from the host: ACK/NAK Protocol Response ACK NAK DC1 Timeout Control Level Scanner, Cradle and Host Notes Monitors response from the host. Cradle Center LED: Green Light Blinks ACK Transmission None Scanner Green Light with GR Buzzer Receive ACK Red Light with NG Buzzer NAK of Host Transmission Center LED: Red Light Blinks DC1 of Host Transmission None Receive NAK Green Light Receive DC1 Red Light with ERROR Buzzer Timeout Transmission Receive Timeout ACK/NAK timeout can be set as follows using the menu or commands. Menu / Command ACK/NAK timeout XI0 Indefinitely (Default) XI1 100 ms XI2 200 ms XI3 300 ms Figure 12: ACK/NAK 13 CRD-3301 SS08xxx f) ACK/NAK NO RESPONSE When no response from the host is received within the set time, the cradle assumes an ACK response, and returns to the initial state without the error buzzer. The other actions are the same as ACK/NAK. Response Timeout Menu / Command Cradle None Scanner Green Light with GR Buzzer None Receive Timeout Menu / Command XI4 Indefinitely XI5 100 ms (default) XI6 500 ms XI7 1000 ms 8.1.8. Baud Rate Setting Receive baud rate setting information from the scanner and configure the settings. 8.2. USA Interface 8.2.1. Specifiacation USB2.0 HID Compliant 8.2.2. Connector USB type B connector 8.2.3. Pin Assignment Pin No. Signal name VBUS DD+ GND Note Interface detection 14 CRD-3301 SS08xxx 8.2.4. Interface Circuit Figure 13: Interface circuit 9. Interface Cable Both a RS232C cable and a USB cable are included for a package. 9.1. RS232C Cable A dedicated RS-232C cable is packaged in a box with CRD-7734. Cable model no.: B04009-05 9.2. USB Cable Cable model no.: B03006-11 10. Default Setting CRD-3301 is shipped with the following default settings (DIPSW5): Default Setting Parameter Baud Rate Data Bit Length Party Bit Stop Bit Handshake Setting 9600 bps 8 bits No parity 1 stop bit BUSY/READY ACK/NAK CTS Timeout No ACK/NAC Indefinitely 15 CRD-3301 SS08xxx 11. Serial Label The serial number shown below is affixed to the cradle. Figure 14: Serial label 16 CRD-3301 SS08xxx 12. Packaging Specifications 12.1. Individual Packaging Specufuactions Size of the package: 163 (W) × 252 (D) × 123 (H) (mm) *T.B.D Figure 15: Individual packaging specifications 12.2. Collective Packaging Specufuactions Size of the package: 260 (W) × 830 (D) × 255 (H) (mm) *T.B.D Figure 16: Collective packaging specifications Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the European Union. 13. Environmental Specifications 13.1. Operating Temperature and Humidity Operating temperature: 0 to 40° C (Excluding AC adapter) humidity: -25 to RH (No condensation, no frost) 13.2. Storage Temperature and Humidity Storage temperature: -20 to 60° C humidity: 20 to 90% RH 13.3. Electrical Specifications Withstand voltage: AC 1500V / 60 seconds 10mA or less Insulation resistance: DC500V 2MΩ Leak current: 250μA or less / AC 250V 60Hz Line noise: ±1kV or higher Static noise: No destruction: ±15KV (air discharge, direct) No malfunction: ±8kV (air discharge, direct) ±8kV (air discharge, direct) *Measurement environment: Use electrostatic testing device compliant with IEC 61000-4-2. (150pF, 330Ω) ・ ・ ・ ・ ・ 13.4. Drop Test (without packaging) No malfunction occurred after the following drop test. Drop Test: Drop the scanner from a height of 75 cm onto a concrete floor. (three times in each of 6 angles). 13.5. Drop Test (with individual packaging) No malfunction occurred after the following drop test. Drop Test: Drop an individually packaged scanner from a height of 75 cm onto a concrete floor once on its 1 corner, 3 edges, and 6 sides (10 total drop tests). 13.6. Vibration Strength No malfunction occurred after the following vibration test. 17 CRD-3301 SS08xxx Vibration test: Increase the frequency of the vibration from 10 Hz to 100 Hz with accelerated velocity 19.6 m/s2 (2 G) for 60 minutes in non-operating state. Repeat this routine in each X, Y, Z direction once for 60 minutes each. 14. Reliability Parameter MTBF Number of Contact Number of operation Tested Parts Current-carrying parts Power supply terminal Lever switch Life 7 years 1,000,000 times 100,000 times 15. Warranty 15.1. Warranty Period OPTOELECTRONICS Co., Ltd. warrants that this product is free of defects or malfunctions for a period of twelve (12) months from its shipment. In case of having defects or malfunctions caused by normal usage in accordance with this specification during the foregoing warranty period, OPTOELECTRONICS shall repair or adjust the product free of charge. Any repair or replacement of the product after the foregoing warranty period shall be charged at regular repair rates. If defects or malfunctions were caused by customer mishandling, product repairs or replacement will be charged at regular repair rates, even during the foregoing warranty periOD. 15.2. Delivery Products for maintenance or repair shall be sent back to OPTOELECTRONICS. The sender is responsible for all shipping costs. 15.3. Repair Time Frame Repaired products shall be shipped back to the customer within 20 days after acceptance by OPTOELECTRONICS. Expedited repairs may be available, subject to terms agreed to by OPTOELECTRONICS and the customer. 15.4. Repair Time Frame The maintenance period of this product is 5 years after its shipment. OPTOELECTRONICS may discontinue maintenance for this product during the 5-year maintenance period if a satisfactory replacement product or maintenance solution is agreed to. 15.5. Others Any additional warranty issues must be discussed with OPTOELECTRONICS on a case-by-case basis. 18 CRD-3301 SS08xxx 17. RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC. 18. Precautions 18.1. Radio Low The data collector has obtained the Certification for Construction Design of Specified Radio Equipment. Therefore it does not need to have a radio station license in Japan. The following activities are prohibited under the Radio Law: • Remodeling and disassembly • Peeling off the certificate label Do NOT use the data collector under the following environment: *Otherwise radio interference may affect other device and end up with causing physical or material damage. • • Safety apparatus and medical device for human body protection Environment where is concerned to cause serious damage 18.2. HANDLING Handle this product carefully. Do not deliberately subject it to any of the following. (1) Shock ・Do not drop from the non-standard height. ・Do not place any heavy items on the data collector. ・Do not squeeze it between any heavy items. ・Do not swing around the cable. (2) Temperature Conditions ・Do not use the data collector at temperatures outside the specified range. ・Do not pour boiling water on the data collector. ・Do not throw the data collector into the fire. (3) Foreign Materials ・Do not put the data collector into liquid. ・Do not put the data collector into chemicals. (4) Others ・Do not disassemble this product. ・Do not use the data collector near a radio or a TV receiver. It may cause reception problems. ・The data collector may be damaged by voltage drops caused by lightning. ・The data collector may not perform properly in environments when placed near a flickering light, such as a CRT 18.3. Export Administration Regulations This product is subject to the strategically controlled exports regulated under “Foreign Exchange and Foreign Trade Laws”. Therefore, export of this product may require an export permission of Japanese government. 20 CRD-3301 SS08xxx 19. Bluetooth To communicate via Bluetooth, the device which CRD-3301 is connected to must support the same Bluetooth version and profile as CRD-3301’s. ・ CRD-3301 is compliant to Bluetooth standards. However, we cannot assure the connection between CRD-3301 and other Bluetooth devices which have not been tested. ・ Bluetooth supporting devices use 2.4 GHz frequency band. However, many other sorts of devices also utilize this frequency band. It may effect the communication speed or communication range of this data collector. ・ The use of CRD-3301 outside of the European Union, the United States and Canada is punishable under the law. ・ Communication speed and communication range of CRD-3301 may differ due to the obstacles and radio wave conditions between CRD-3301 and the device, which CRD-3301 is connected to. ・ Conditions of the device, which CRD-3301 is connected to, may also affect the communication speed and communication range of CRD-3301. 20. Frequency Band The frequency band 2.4 GHz is utilized by this scanner. Read carefully the followings before using this product. In the frequency band of this scanner, scientific, medical and industrial devices including microwaves are used. Also other radio stations including local private radio station for mobile object identification requiring license for such as manufacturing lines at factories, specific power-saving radio station requiring no license and amateur radio station are managed. Please make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before using this scanner. In case that radio interference occurs between this scanner and “other radio stations,” change the service space immediately, or stop transmitting radio wave to avoid the interference. If you have any questions or troubles, please contact our marketing group. 21 CRD-3301 SS08xxx Appendix. Mechanical Drawing [単位: mm] Figure 17: Mechanical drawing of CRD-3301 22
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 Format : application/pdf Title : Microsoft Word - SS08ｘｘｘ_CRD-3301_1_ENG 08.11.06.doc Creator : abem Create Date : 2009:01:16 10:58:01+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2009:03:17 17:04:31+08:00 Metadata Date : 2009:03:17 17:04:31+08:00 Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:adc0d315-d161-42ae-88e7-3a0200a04c1a Instance ID : uuid:4d76dd91-79c6-4f81-83e1-4d40ab2c4c0c Has XFA : No Page Count : 25 Author : abemEXIF Metadata provided by EXIF.tools