OPTOELECTRONICS OPH5000I Handy Terminal with Bluetooth User Manual

OPTOELECTRONICS Co., Ltd. Handy Terminal with Bluetooth Users Manual

UserManual.wiki >

OPTOELECTRONICS >

OPH5000I User Manual

Users Manual

OPH-5000i 1st 1 OPH-5000i Handy Terminal with Bluetooth This manual provides specifications for the OPH-5000i Wireless LAN Handy Terminal with imager scanner. 1st

OPH-5000i 1st 2 The information in this document is subject to change without notice. Document History Model Number: OPH-5000i Specification Number: SS16051 Edition: 1st Original Spec Number: (SS16003) Date: 01-September-2016 2016 Copyright Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase excluding batteries. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages. Packaging The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your data collector or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty. Trademarks Trademarks used are the property of their respective owners. Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184 SUPPORT USA Europe Phone: 800-636-0090 Email: support@opticonusa.com Email: support@opticon.com Web: www.opticonusa.com Web: www.opticon.com

OPH-5000i 1st 3 Revision History Product Name : OPH-5000i Edition Date Page Section Description of Changes 1st 2016/09/01 - - -

OPH-5000i 1st 4 Contents 1 Abstract ............................................................................................................................ 6 2 Overview .......................................................................................................................... 6 3 Basic Specifications ....................................................................................................... 7 4 Detailed View ................................................................................................................. 10 5 Electrical Specifications ............................................................................................... 13 5.1 Electrical Specifications .......................................................................................................... 13 5.2 Wireless Charging .................................................................................................................. 13 6 Interface Specifications ................................................................................................ 13 6.1 USB Interface ......................................................................................................................... 13 6.1.1 Connector ....................................................................................................................... 13 6.1.2 USB Interface Circuit ...................................................................................................... 13 6.2 Bluetooth ................................................................................................................................ 14 6.3 Wireless LAN .......................................................................................................................... 14 6.3.1 IEEE 802.11b .................................................................................................................. 14 6.3.2 IEEE 802.11g .................................................................................................................. 14 6.3.3 IEEE 802.11n .................................................................................................................. 14 6.4 Built-in NFC Tag ..................................................................................................................... 14 7 Optical Specifications ................................................................................................... 15 7.1 Basic Specifications ............................................................................................................... 15 7.2 Aiming Pattern ........................................................................................................................ 16 8 Technical Specifications .............................................................................................. 17 8.1 Barcode Test Sample ............................................................................................................. 17 8.2 Scan Area and Depth of Field ................................................................................................ 19 8.3 Printed Contrast Signal (PCS) ............................................................................................... 20 8.4 Minimum Resolution ............................................................................................................... 20 8.5 Barcode Width ........................................................................................................................ 20 8.6 Pitch, Skew and Tilt ................................................................................................................ 21 8.7 Curvature ................................................................................................................................ 21 8.8 Motion Tolerance .................................................................................................................... 22 9 Environmental Specifications ...................................................................................... 23 9.1 Temperature ........................................................................................................................... 23 9.2 Humidity .................................................................................................................................. 23 9.3 Ambient Light Immunity .......................................................................................................... 23 9.4 Dust and Drip Proof ................................................................................................................ 24 9.5 Vibration Strength (without packing) ...................................................................................... 24 9.6 Vibration Strength (in individual packing) ............................................................................... 24 9.7 Drop Impact Strength (without packaging) ............................................................................. 24 9.8 Drop Impact Strength (in individual packaging) ..................................................................... 25 9.9 Electrostatic Discharge Immunity ........................................................................................... 25 10 Regulatory Compliance ................................................................................................ 26

OPH-5000i 1st 5 10.1 LED Safety ............................................................................................................................. 26 10.2 Product Safety ........................................................................................................................ 26 10.3 EMC ........................................................................................................................................ 26 10.4 Other ....................................................................................................................................... 28 11 RoHS .............................................................................................................................. 28 12 Reliability ....................................................................................................................... 28 13 Precautions .................................................................................................................... 28 13.1 Radio Law............................................................................................................................... 29 13.2 Bluetooth ................................................................................................................................ 29 13.3 Frequency Baud ..................................................................................................................... 29 13.4 Usage Note ............................................................................................................................ 29 14 Product Labels .............................................................................................................. 30 15 Packaging Specifications ............................................................................................. 31 15.1 Individual Packaging .............................................................................................................. 31 15.2 Collective Packaging .............................................................................................................. 33 16 Physical Features .......................................................................................................... 34 16.1 Dimensions ............................................................................................................................. 34 16.2 Weight .................................................................................................................................... 34 16.3 Mechanical Drawing ............................................................................................................... 34 17 Supported Symbologies ............................................................................................... 35 17.1 Default Setting ........................................................................................................................ 35 17.2 Supported Symbologies ......................................................................................................... 35 17.2.1 1D Barcodes ................................................................................................................... 35 17.2.2 GS1 Databar, Composite Code ...................................................................................... 36 17.2.3 2D Codes ........................................................................................................................ 36 Table of Figures Figure 1: Detailed View ......................................................................................................................... 11 Figure 2: micro USB B Connector ......................................................................................................... 13 Figure 3: Interface Circuit (USB) ........................................................................................................... 13 Figure 4: Aiming Pattern and Imaging Range ....................................................................................... 16 Figure 5: Scan Area and Depth of Field ................................................................................................ 19 Figure 6: Wide Barcode ......................................................................................................................... 20 Figure 7: Pitch, Skew and Tilt ................................................................................................................ 21 Figure 8: Curvature ................................................................................................................................ 21 Figure 9: Motion Tolerance .................................................................................................................... 22 Figure 10: Drop Test .............................................................................................................................. 24 Figure 11: Product Label Position ......................................................................................................... 30 Figure 12: Individual Packaging ............................................................................................................ 31 Figure 13: Collective Packaging ............................................................................................................ 33 Figure 14: Mechanical Drawing ............................................................................................................. 34

OPH-5000i 1st 7 3 Basic Specifications Item Specification Note Control Section CPU 32bit CISC/96MHz FROM 2Mbyte + 32KByte System area FROM 1Mbyte Application area RAM 16Mbyte It may be cleared by the removal of the main battery. FROM (storage) 128Mbyte For data area only Input Section Key type Number 10 key F1~F3 3 key Power 1 key Up, down, SCAN (Placed on top panel) 3 key SHIFT, BS, CLEAR, decimal point, ENT 5 key Side touch sensor 1 sensor for scan Backlight White Display Section Display element TFT color LCD display Backlight White, brightness adjustable Display size 1.77 inch, (W)128× (L)128 dots Font size 12/16/24 dot Type of characters JIS Standard No.1 and 2, ANK Structure of Characters When in 12 dot Font mode (digit × row) Reduced-size ANK: 21×21 Half-size character: 21×10 Kanji character: 10×10 When in 16 dot Font mode (digit × row) Reduced-size ANK: 16×16 Half-size character: 16×8 Kanji character: 8×8 When in 24dot Font mode (digit × row) Reduced-size ANK: 10×10 Half-size character: 10×5 Kanji character: 5×5 LED red, green one place, and blue 1 place Buzzer Loudness (3-level) / tone adjustable Vibration motor Strength (3-level) / duration adjustable RTC Contents Year, month, date, hour, minute, second Data and time are lost when the main battery is removed. Accuracy ± 90 seconds per month Interface Wireless LAN Specification IEEE 802.11 b/g/n compliant Frequency 2412~2472MHz (1~13ch) Maximum output 0.0026W/MHz IEEE 802.11b Access method Infrastructure mode (STA) Security WEP,WPA,WPA2

OPH-5000i 1st 9 Item Specification Note Minimum resolution (mm) PDF417 : 0.169 mm QR Code : 0.169 mm DataMatrix : 0.169 mm PCS 0.9 Depth of field (mm) PDF417 Resolution (0.169) 85~ 135 PCS 0.9 Resolution (0.254) 65 ~ 180 QR Code Resolution (0.212) 90 ~ 110 Resolution (0.381) 55 ~ 180 DataMatrix Resolution (0.254) 85 ~ 135 Common Scan angle Pitch : ±70° Skew : ±70° Tilt : ±360° Minimum PCS 0.2 or more MRD 32% or more Power Section Main battery Lithium-ion 1100 mAh (typ.) Up-time 20 hours or more *1 Charging time Less than 3 hour Using dedicated cradle. Room temperature 25℃ Feeding system Electromagnetic guidance wireless charging, microUSB Operating (charging) voltage 4.5 ~ 5.5V Charging with USB Current consumption Charging Less than 500 mA Environmental Specifications Temperature Operating -10 ~ 50°C Storage -20 ~ 60°C Humidity Operating 20 ~ 85% No condensing No frost Storage 20 ~ 85% Ambient light immunity Fluorescent 10,000 lx or less UPC 100% Optical axis angle 75° Distance: 100mm Sunlight 100,000 lx or less Vibration 10 Hz ~ 100 Hz, acceleration of 19.6 m/s2, 60 minutes per cycle, repeat in each X, Y and Z-direction Drop Drop the scanner 18 times (6 faces x 3) from a height of 150 cm onto a concrete floor Dust and drip proof IP54 equivalent Regulatory Compliance LED safety JIS C 6802：2011 Class2 IEC 60825-1 Ed.2: 2007 Class 2 CDRH Class Ⅱ Product safety EN60950-1:2005 IEC60950-1:2006 EMC EN 55024:2010 EN 55032:2012+AC: 2013 EN 301 489-1 V1.9.2 EN 301 489-17 V2.2.1 EN 300 328 V1.9.1 EN 302 291-2 V1.1.1 FCC Part 15 Subpart C, Subpart B Class A VCCI Class A For residential, commercial and light-industrial environments European conformity CE Marking

OPH-5000i 1st 11 Figure 1: Detailed View

OPH-5000i 1st 12 No Name Description 1 LED Indicates operational status, such as scanning and communication. It is able to be controlled by user’s programs. 2 LCD Indicates scanned barcodes and operational items. 3 MicroUSB Connecter Cap MicroUSB connector is stored. 4 Buzzer Orifice Holes for buzzer. 5 Strap Orifice Holes for attaching a hand strap. 6 Scan Window LED illumination is emitted from this window to read barcodes. 7 Battery Cover Rechargeable battery is stored. 8 Battery Cover Lock Used to lock / open the battery cover. 9 Charging Coil The charging coil is located here with which the dedicated cradle can supply power to the scanner.10 NFC This is the location of the NFC tag. Hold an NFC reader close to this area when the tag has to be read.11 Side Trigger Sensor Start an operation of reading code by touching. 12 Trigger Key Press when reading code. 13 Up and Down Key Key use for selecting item and moving cursor. 14 Numeric Keypad Numeric, enter, decimal point key and the key’s to support these inputs.15 F1, F2, F3 Function key. 16 Power Key Power On/Off key.

5 Ele5.1 ESuBuCu 5.2 WFePo 6 IntThe OPH6.1 UIn 6.1.1 C 6.1.2 ectrical Slectrical Supply Voltagus-power (Clurrent consuWireless Ceeding systeower consumterface SH-5000i interUSB Interfaterface is FuConnectorSignal NVCDATADATA(NCGNUSB InterfaSpecificaSpecificatie lass)umption harging m mption Specificarface is selecace ull Speed USr Name CC A(-) A(+) C) D ace Circuit PowSupMicro-controller ations ions : 4.5-5.5V: Hi-Powe: Less tha: Electrom: Less thaations ctable from thB interface.Contact Num1 2 3 4 5 t Figure 3: wer pply V er ( 500mA man 500mA magnetic induan 5W hree types; Umber : Interface Circmax ) uction USB / BluetoFigucuit (USB) ooth and Wirere 2: micro USUSB Connect Oeless LAN. SB B Connect ctor OPH-5000i 1st 13 tor

OPH-5000i 1st 15 Recorded Contents: Total 928 byte NDEF Record #1 type: ”application/vnd.bluetooth.ep.oob” OOB data length: 8 Byte MAC address: 00:12:6A:xx:xx:xx Record #2 type: ”T” TEXT data length: 15 Byte TEXT data: ”00126Axxxxxx” Free area Reserved area *xx differ depending on the product.Rewriting from external: possible 7 Optical Specifications 7.1 Basic Specifications Item Characteristics Scan method CMOS area sensor (white / black) - Number of effective pixel (Column) × (Row) 640 × 480 dots Image capture speed (*1) Frame rate 100 fps Focal distance Distance from the front edge of scanner 109.2mm View angle Horizontal Approx. 38.0° Vertical Approx. 28.9° Diagonal Approx. 46.4° Illumination light source (LED × 1) Color Warm white Color temperature 2600～3700K Maximum radiation output (*3) 114lm/W Aiming light source (LED × 1) Color Green Peak wavelength 535 nm Maximum radiation output (*4) 87.4m/W *1 The fastest seed of image capture *2 Reference value extracted from the datasheet. *3, *4 Reference value based on the datasheet (25°C, IF = 140 mA ).

7.2 AT12 T-- Aiming PatThe aiming is1. Fill light to2. Fill light wThe aiming s- The horizona distance - The horizonaiming widtttern s used for tho recognize thhen auto trigspecificationsntal width of of L=85±20 ntal imaging th. Fie following phe appropriagger is used. s are as follothe imaging mm from thefield of view igure 4: Aimin purpose: ate reading ra ows: field of viewe front edge o at a distancng Pattern andange. and the horof the scanne of L=85 md Imaging Ranizontal aiminer. m is 100%±1ge Ong width are 10% of the hOPH-5000i 1st 16 equal at orizontal

OPH-5000i 1st 17 8 Technical Specifications Aim the laser light at the center of a code to scan it. For long distance scanning, ambient light entering the angle of view may affect the scanning performance. The conditions for technical specifications are as follows, unless otherwise specified in each section. <Conditions> Ambient Temperature and Humidity Room temperature, room humidity Ambient Light 100 ~200 lux (on the surface of a barcode) Angles Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0° Curvature R = ∞ Power Supply Voltage 5.0 V PCS (1D and 2D) 0.9 or higher Scanning Test Accept the performance with 90% or more success rate for 10 tries of scan. One reading should be 2 seconds. Barcode Test Sample (1D and 2D) Specified below. < Test chart > For 1D codes, OPTOELECTRONICS test samples For GS1 Databar, stacked codes and 2D codes, printed by a dedicated printer for barcode 8.1 Barcode Test Sample 1D Barcodes <Code 39> Resolution Symbology PCS Size (mm) No. of Digits 0.1 mm (3.9 mil) Code 39 0.9 26 × 10 16 0.127 mm (5 mil) 11 × 10 4 0.20 mm (7.9 mil) 100 × 10 31 0.254 mm (10 mil) 32.5 × 10 7 0.508 mm (20 mil) 43 × 25 4 <Code 128> Resolution Symbology PCS Size (mm) No. of Digits 0.20 mm (7.9 mil) Code 128 0.9 52 × 10 36 <UPC> Resolution Symbology PCS Size (mm) No. of Digits 0.330 mm (13 mil) 12-digit UPC 12-digit EAN 0.9/0.2 31.5 × 24.5 12/13 GS1 Databar/Composite <GS1-limited> Resolution Symbology PCS Size (mm) No. of Digits 0.169 mm (6.7 mil) Limited 0.9 12 × 1.5 14 0.169 mm (6.7 mil) Limited-Composite 0.9 12 × 3.0 26

OPH-5000i 1st 18 2D Codes <PDF417> Resolution Error Correction PCS Size (mm) No. of Character0.169 mm (6.7 mil) Level-3 0.9 23 × 10 58 0.254 mm (10 mil) 35 × 15 <QR Code: Model-2> Resolution Error Correction PCS Size (mm) No. of Character0.212 mm (8.4 mil) M 0.9 5 × 5 44 0.381 mm (15 mil) 11 × 11 <Data Matrix> Resolution Model PCS Size (mm) No. of Character0.212 mm (8.4 mil) ECC200 0.9 4 × 4 40 0.254 mm (10 mil) 6 × 6 * The size is outline dimensions excluding the quiet zones.

OPH-5000i 1st 19 8.2 Scan Area and Depth of Field The scan area is the depth of field range, measured from the front edge of the scanner, swept over the entire scan arc. 100 200 30050 150 250[単位：mm]18 Figure 5: Scan Area and Depth of Field Resolution 0127mm Resolution 0254mm Resolution 0508mm Resolution 02mm Resolution 033mm Resolution 0169mm Resolution 0254mm Resolution 0212mm Resolution 0381mm Resolution 0254mm [Unit: mm]

OPH-5000i 1st 20 8.3 Printed Contrast Signal (PCS) 0.2 or higher <Conditions> MRD : 32% and higher (70% or higher reflectivity of space and quiet zone) Distance : 125mm from the front edge of the scanner Barcode Sample : UPC specified in Chapter 8. (Resolution: 0.33 mm, PCS: 0.3) MRD = Minimum reflectance of white bar - Maximum reflectance of black bar 8.4 Minimum Resolution 1D Code : 0.1 mm (3.9 mil) Code 39 specified in Chapter 8.1 GS1-Databar : 0.169 mm (6.7 mil) GS1 Databar Limited specified in Chapter 8.1 Stacked Code : 0.169 mm (6.7 mil) PDF417, GS1 Databar Limited Composite specified in Chapter 8.1 2D Code : 0.169 mm (6.7 mil) QR Code, Data Matrix specified in Chapter 8.1 <Conditions> Barcode Sample : The above codes specified in Chapter 8.1 Distance : 95 mm from the front edge of the scanner Angle : α = 0°, β =＋15°, γ = 0° Curvature : R = ∞ 8.5 Barcode Width Code 39 with width of 100 mm and resolution of 0.2 mm can be read <Conditions> Barcode Sample : 0.20 mm Code 39 / PCS 0.9 specified in Chapter 8.1 Distance : 155 mm from the front edge of the scanner Angle : α = 0°, β =＋15°, γ = 0° Curvature : R = ∞ Figure 6: Wide Barcode PCS = Reflectance of white space – Reflectance of black bar Reflectance of white space

OPH-5000i 1st 21 8.6 Pitch, Skew and Tilt Pitch : α = ±50° Skew : β = ±50° Tilt : γ = ±180° <Conditions> Barcode Sample : 0.33 mm Code 39 specified in Chapter 7.1 Distance : 125 mm from the front edge of the scanner Curvature : R = ∞ * For the pitch angle and tilt angle measurement, set the skew angle β = +15° βγ+++--- Figure 7: Pitch, Skew and Tilt 8.7 Curvature 0.33 mm 12-digit UPC : R ≧ 20 mm 0.15 mm 10-digit Codabar(NW-7) : R ≧ 16 mm <Conditions> Barcode Sample 0.33 mm UPC, 0.15 mm Codabar specified in Chapter 8.1 Distance 105 mm from the edge of the scan engine Angle Skew angle β = +15° Rバーコード Figure 8: Curvature Note: Scanning may fail due to the specular reflection of the LED illumination when the reflectivity of the barcode is high. Barcode

OPH-5000i 1st 22 8.8 Motion Tolerance UPC 100% can be read when it is moving at 2m/s. <Conditions> Ambient Temperature and Humidity : Room temperature and Room humidity Ambient Light : 500 ~ 1000 lux Distance : 125 mm from the front edge of the scanner PCS (1D and 2D) : 0.9 or higher Barcode Sample : Refer to Chapter 8.1. * Scanning may fail due to the specular reflection of LED illumination when the reflectivity is high. Figure 9: Motion Tolerance

OPH-5000i 1st 23 9 Environmental Specifications 9.1 Temperature Scanning performance is guaranteed when the ambient temperature around the scanner is within the following ranges: Operating Temperature : -10 ~ 50 °C Storage Temperature : -20 ~ 60 °C Please charge when the temperature is between 0 and 40°C. When the temperature is over 40°C, charging may stop to prevent battery breakdown. <Conditions> Barcode : Resolution 0.33 mm, 9-digit Code 39 specified in Section 9.1. Distance : 125 mm from the front edge of the scanner Angle : α = 0°, β =＋15°, γ = 0° Curvature : R = ∞ Scanning Test : Scan at interval 1000ms Power consumption : 3.7V 9.2 Humidity Scanning performance is guaranteed when the ambient humidity around the scanner is within the following ranges: Operating Humidity : 20 ~ 85%RH (no condensation, no frost) Storage Humidity : 20 ~ 85%RH (no condensation, no frost) <Conditions> Barcode : Resolution 0.33 mm, 9-digit Code 39 specified in Section 9.1. Distance : 125 mm from the front edge of the scanner Angle : α = 0°, β =＋15°, γ = 0° Curvature : R = ∞ Scanning Test : Scan at interval 1000ms Power consumption : 3.7V 9.3 Ambient Light Immunity Scanning performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light: 10,000 lx Fluorescent light: 10,000 lx Sunlight: 100,000 lx <Conditions> Barcode: Resolution 0.33 mm, 9-digit Code 39 specified in Section 9.1. Distance: 125 mm from the front edge of the scanner Angle: α = 0°, β =＋15°, γ = 0° Curvature: R = ∞ Power consumption: 3.7V Avoid direct or specula reflection from the light source as it may blind the scanners optical receiver.

OPH-5000i 1st 24 9.4 Dust and Drip Proof IEC IP54 equivalent Protection against solid objects: Level 5 equivalent (Dust proof type) Prevent dust ingress to inside. Even if slight dust intrusion will not inhibit normal operation. Protection against liquids: Level 4 equivalent (Splash proof type) Protected against water splash from any direction. * () is JIS drip-proof type. 9.5 Vibration Tolerance (without packing) There shall be no malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an acceleration velocity of 19.6m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in the non-operating state. Repeat this of each X, Y and Z direction. 9.6 Vibration Tolerance (in individual packing) There shall be no malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerattion velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in individually packaged state. Repeat this of each X, Y and Z direction. 9.7 Drop Impact Tolerance (without packaging) There shall be no malfunction after the following drop test. Drop test: Drop the scanner 18 times in total (3 times at each 6 face), from a height of 150 cm onto a concrete floor as shown below. 150cm Figure 10: Drop Test

OPH-5000i 1st 25 9.8 Drop Impact Tolerance (in individual packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop an individually packaged scanner 10 times in total, at any of 1 corner, 3 edges, and 6 faces, from a height of 150 cm onto a concrete floor. 9.9 Electrostatic Discharge Immunity Air discharge ±8 kV max. (No malfunction) ±15 kV max. (No destruction) Measurement environment An electrostatic testing device compliant with IEC 61000-4-2 is used. Discharge resistance 330 Ω Charging capacitor 150 pF

OPH-5000i 1st 26 10 Regulatory Compliance 10.1 LED Safety IEC 62471:2006 Exempt_Group 10.2 Product Safety EN60950-1:2005 IEC60950-1:2006 10.3 EMC ・EN 55024:2010 ・EN 55032:2012+AC: 2013 ・EN 301 489-1 V1.9.2 ・EN 301 489-17 V2.2.1 ・EN 300 328 V1.9.1 ・EN 302 291-2 V1.1.1 CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions

OPH-5000i 1st 27 FCC Part 15 Subpart C, Subpart B Class A VCCI Class A Federal Communications Commission Notices This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case users will be required to correct the interference at their own expense. Harmful Interference Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with FCC SAR exposure limits set forth for an uncontrolled environment. SAR compliance for using the equipment in close proximity to the human body has been evaluated at 0mm. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI). If this equipment is used in a domestic environment, radio interference may occur, in which case the user may be required to take corrective actions.

OPH-5000i 1st 30 14 Product Labels The product labels are affixed to the scanner as shown below. Figure 11: Product Label Position

OPH-5000i 1st 31 15 Packaging Specifications 15.1 Individual Packaging Assembled package size: 125 × 112 × 40 (WDH mm) Weight: Approx. xx kg Figure 12: Individual Packaging MADE IN▲▲▲▲▲Model No.MODEL NEMESpec No.*ﾊﾞｰｺｰﾄﾞ**△△△△△△*Serial No. Quantity 1ＲｏOPH-5000i-BLKｼﾘｱﾙNo.の表示について『 123456 』123456＝製品ｼﾘｱﾙNo.6桁のｼﾘｱﾙNo.を表示【国内向】個装箱ﾊﾞｰｺｰﾄﾞﾗﾍﾞﾙ (3A0002）【原産国表示】～country of origin～中国生産（produced in China）＝MADE IN CHINA日本生産（produced in Japan）＝MADE IN JAPAN*UF1OPH5000*Poly bag2回、巻き付ける梱包袋：MicroUSBｹｰﾌﾞﾙイラストの向きで一番上に入れるﾈｯｸｽﾄﾗｯﾌﾟLDCを上にして入れる個装箱余った梱包袋の上にネックストラップを入れるWrap twice Packing bag MicroUSB cable Place as the drawing on top. Neck strap Individual boxPut in with LCD upwardPlace neck strap on top of the space

OPH-5000i 1st 32

15.2 C10AsWNoOp Collective P00pcs per bossembled paWeight: Approote: ‘Ro mark’ ptoelectronicsPackagingox ackage size ox. xx kg on the trays as Co., Ltd. g : 595 × 520and boxes indFigure 13 0 × 245 (WDdicates that the3: Collective PH mm) e product is RoPackaging oHS complian Ont as is declareOPH-5000i 1st 33 ed by

OPH-5000i 1st 34 16 Physical Features 16.1 Dimensions 136 × 44 × 30.3(22) (DWH mm) () is grip dimensions 16.2 Weight Approx. 120 g (excluding accessories) 16.3 Mechanical Drawing Figure 14: Mechanical Drawing Unit: mm

OPH-5000i 1st 35 17 Supported Symbologies 17.1 Default Setting The scanner is set to default by reading the following menu label. Default 17.2 Supported Symbologies 17.2.1 1D Barcodes Code type Default Minimum length Remarks UPC ○ - UPC Add-on 2 UPC Add-on 5 EAN(JAN) ○ - EAN Add-on 2 EAN Add-on 5 EAN-13 ○ EAN-13 Add-on 2 EAN-13 Add-on 5 EAN-8 ○ EAN-8 Add-on 2 EAN-8 Add-on 5 Code 39 ○ 1 Not transmit ST/SP Tri-Optic ○ - Not transmit ST/SP Codabar (NW7) ○ 1 Not transmit ST/SP Industrial 2of 5 ○ 5 Interleaved 2of 5 ○ 6 S-Code 5 Code 128 ○ 1 GS1 conversion (setting required) Code 93 ○ 1 IATA ○ 5 MSI/Plessey 3 UK/Plessey 2 Telepen 1 Code 11 1 Matrix 2 of 5 5 Chinese Post Matrix 2 of 5 - Korean Postal Authority - Intelligent Mail Barcode - POSTNET - JPN (Customer Barcode) - @MENU_OPTO@ZZ@SO@ZZ@OTPO_UNEM@

OPH-5000i 1st 36 17.2.2 GS1 Databar, Composite Code Code type Default Remarks GS1 DataBar ・GS1 DataBar Omnidirectional ・GS1 DataBar Truncated ・GS1 DataBar Stacked ・GS1 DataBar Stacked Omnidirectional ○ GS1 conversion (setting required) GS1 DataBar Limited ○ GS1 DataBar Expanded ・GS1 DataBar Expanded ・GS1 DataBar Expanded Stacked ○ Composite GS1-DataBar ・CC-A ・CC-B ・Limited CC-A ・Limited CC-B ・Expanded CC-A ・Expanded CC-B GS1 conversion (setting required) Composite GS1-128 ・CC-A ・CC-B ・CC-C GS1 conversion (setting required) Composite EAN ・EAN-13 CC-A ・EAN-13 CC-B ・EAN-8 CC-A ・EAN-8 CC-B GS1 conversion (setting required) Composite UPC ・UPC-A CC-A ・UPC-A CC-B ・UPC-E CC-A ・UPC-E CC-B GS1 conversion (setting required) 17.2.3 2D Codes Code type Default Remarks PDF417 ○ Micro PDF417 Codablock F QR Code ○ GS1 conversion (setting required) Micro QR ○ Data Matrix (ECC 200) ○ GS1 conversion (setting required) Data Matrix (ECC 000-140) Aztec Code ○ Aztec Runes Chinese-sensible code Maxi Code * The supported symbologies vary depending on specifications for the application to be loaded.