OPTOELECTRONICS OPH5000I Handy Terminal with Bluetooth User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3698317
Application ID	ZjwfHIUEC5xDVDMhIE2gfg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	215.97kB (2699601 bits)
Date Submitted	2017-12-29 00:00:00
Date Available	2018-01-19 00:00:00
Creation Date	2017-12-21 13:43:38
Producing Software	Acrobat Distiller 8.3.1 (Windows)
Document Lastmod	2017-12-21 13:43:38
Document Title	Microsoft Word - SS16051(SS16003)_PX49 OPH-5000i_Preliminary_171127_Eng vcci a.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	skonno0287

OPH-5000i
OPH-5000i
1st
Handy Terminal with Bluetooth
This manual provides specifications for the OPH-5000i Wireless
LAN Handy Terminal with imager scanner.
1st
OPH-5000i
1st
The information in this document is subject to change without notice.
Document History
Model Number:
Edition:
Date:
OPH-5000i
1st
01-September-2016
Specification Number:
Original Spec Number:
SS16051
(SS16003)
2016 Copyright Opticon. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted
to any electronic or machine readable form without prior written consent of Opticon.
Limited Warranty and Disclaimers
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING
OR USING THE PRODUCT.
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to
the device purchased. Do not remove the serial number from your Opticon device. Removing the
serial number voids the warranty.
Warranty
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in
materials and workmanship for two years after purchase excluding batteries. Opticon will repair or, at
its option, replace products that are defective in materials or workmanship with proper use during the
warranty period. Opticon is not liable for damages caused by modifications made by a customer. In
such cases, standard repair charges will apply. If a product is returned under warranty and no defect is
found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and
software, even if Opticon has been informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should
you need to transport your data collector or send it for service. Damage caused by improper
packaging during shipment is not covered by the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of
OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002.
TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184
SUPPORT
USA
Europe
Phone: 800-636-0090
Email: support@opticonusa.com
Web: www.opticonusa.com
Email: support@opticon.com
Web: www.opticon.com
OPH-5000i
1st
Revision History
Product Name : OPH-5000i
Edition
1st
Date
2016/09/01
Page
Section
Description of Changes
OPH-5000i
1st
Contents
Abstract............................................................................................................................ 6
Overview .......................................................................................................................... 6
Basic Specifications ....................................................................................................... 7
Detailed View .................................................................................................................10
Electrical Specifications ............................................................................................... 13
5.1
Electrical Specifications.......................................................................................................... 13
5.2
Wireless Charging .................................................................................................................. 13
Interface Specifications ................................................................................................ 13
6.1
6.1.1
Connector ....................................................................................................................... 13
6.1.2
USB Interface Circuit ...................................................................................................... 13
6.2
Bluetooth ................................................................................................................................ 14
6.3
Wireless LAN .......................................................................................................................... 14
6.3.1
IEEE 802.11b .................................................................................................................. 14
6.3.2
IEEE 802.11g .................................................................................................................. 14
6.3.3
IEEE 802.11n .................................................................................................................. 14
6.4
USB Interface ......................................................................................................................... 13
Built-in NFC Tag ..................................................................................................................... 14
Optical Specifications................................................................................................... 15
7.1
Basic Specifications ............................................................................................................... 15
7.2
Aiming Pattern ........................................................................................................................ 16
Technical Specifications .............................................................................................. 17
8.1
Barcode Test Sample ............................................................................................................. 17
8.2
Scan Area and Depth of Field ................................................................................................ 19
8.3
Printed Contrast Signal (PCS) ............................................................................................... 20
8.4
Minimum Resolution ............................................................................................................... 20
8.5
Barcode Width ........................................................................................................................ 20
8.6
Pitch, Skew and Tilt ................................................................................................................ 21
8.7
Curvature ................................................................................................................................ 21
8.8
Motion Tolerance.................................................................................................................... 22
Environmental Specifications ...................................................................................... 23
9.1
Temperature ........................................................................................................................... 23
9.2
Humidity.................................................................................................................................. 23
9.3
Ambient Light Immunity .......................................................................................................... 23
9.4
Dust and Drip Proof ................................................................................................................ 24
9.5
Vibration Strength (without packing) ...................................................................................... 24
9.6
Vibration Strength (in individual packing) ............................................................................... 24
9.7
Drop Impact Strength (without packaging) ............................................................................. 24
9.8
Drop Impact Strength (in individual packaging) ..................................................................... 25
9.9
Electrostatic Discharge Immunity ........................................................................................... 25
10 Regulatory Compliance ................................................................................................ 26
OPH-5000i
1st
10.1
LED Safety ............................................................................................................................. 26
10.2
Product Safety ........................................................................................................................ 26
10.3
EMC........................................................................................................................................ 26
10.4
Other....................................................................................................................................... 28
11 RoHS .............................................................................................................................. 28
12 Reliability ....................................................................................................................... 28
13 Precautions.................................................................................................................... 28
13.1
Radio Law............................................................................................................................... 29
13.2
Bluetooth ................................................................................................................................ 29
13.3
Frequency Baud ..................................................................................................................... 29
13.4
Usage Note ............................................................................................................................ 29
14 Product Labels .............................................................................................................. 30
15 Packaging Specifications ............................................................................................. 31
15.1
Individual Packaging .............................................................................................................. 31
15.2
Collective Packaging .............................................................................................................. 33
16 Physical Features.......................................................................................................... 34
16.1
Dimensions ............................................................................................................................. 34
16.2
Weight .................................................................................................................................... 34
16.3
Mechanical Drawing ............................................................................................................... 34
17 Supported Symbologies ............................................................................................... 35
17.1
Default Setting ........................................................................................................................ 35
17.2
Supported Symbologies ......................................................................................................... 35
17.2.1
1D Barcodes ................................................................................................................... 35
17.2.2
GS1 Databar, Composite Code ...................................................................................... 36
17.2.3
2D Codes ........................................................................................................................ 36
Table of Figures
Figure 1: Detailed View ......................................................................................................................... 11
Figure 2: micro USB B Connector ......................................................................................................... 13
Figure 3: Interface Circuit (USB) ........................................................................................................... 13
Figure 4: Aiming Pattern and Imaging Range ....................................................................................... 16
Figure 5: Scan Area and Depth of Field ................................................................................................ 19
Figure 6: Wide Barcode ......................................................................................................................... 20
Figure 7: Pitch, Skew and Tilt ................................................................................................................ 21
Figure 8: Curvature................................................................................................................................ 21
Figure 9: Motion Tolerance.................................................................................................................... 22
Figure 10: Drop Test.............................................................................................................................. 24
Figure 11: Product Label Position ......................................................................................................... 30
Figure 12: Individual Packaging ............................................................................................................ 31
Figure 13: Collective Packaging ............................................................................................................ 33
Figure 14: Mechanical Drawing ............................................................................................................. 34
OPH-5000i
1st
1 Abstract
This manual provides specifications for the OPH-5000i 2D Handy Terminal with built-in Wireless LAN
and Bluetooth.
2 Overview
The OPH-5000i is compact imager scanner built-in and output scanned barcode and 2D code data to
hostdevice conected by TCP/IP via wiress LAN. Bluetooth is also aveliable for output.
・ OPH-5000i is handy terminal with a numeric keypad and TFT color LCD display.
・ All barcode data scanned is transmitted to a host device through the Wireless LAN, Bluetooth or
USB interface interface.
・ Wireless LAN supports IEEE 802.11 b/g/n.
・ Bluetooth SPP (Serial Port Profile) and HID (Human Interface Device Profile) are implemented.
・ In addition to the current buzzer sound and LED display, vibration function is also equipped.
・ A green LED aiming line toward a target barcode can help the users find the appropriate scanning
position.
・ Alcohol can be used to wipe the scanner clean
・ The power source is 3.7 V 1100 mAh (typ.) Li-ion battery.
・ The charging is done through a dedicated charging cradle or USB interface.
・ The scanner is Apple MFi certified.
OPH-5000i
1st
3 Basic Specifications
Item
Specification
Note
Control Section
CPU
32bit CISC/96MHz
FROM
2Mbyte + 32KByte
System area
FROM
1Mbyte
Application area
RAM
16Mbyte
It may be cleared by
the removal of the
main battery.
FROM (storage)
128Mbyte
For data area only
Input Section
Side touch sensor
Number
F1~F3
Power
Up, down, SCAN (Placed on top
panel)
SHIFT, BS, CLEAR, decimal point,
ENT
1 sensor for scan
Backlight
White
Display element
TFT color LCD display
Backlight
White, brightness adjustable
Display size
1.77 inch, (W)128× (L)128 dots
Font size
12/16/24 dot
Key type
10 key
3 key
1 key
Display Section
RTC
Type of characters
JIS Standard No.1 and 2, ANK
Structure of Characters
When in 12 dot Font mode
(digit × row)
Reduced-size ANK: 21×21
Half-size character: 21×10
Kanji character: 10×10
When in 16 dot Font mode
(digit × row)
Reduced-size ANK: 16×16
Half-size character: 16×8
Kanji character: 8×8
When in 24dot Font mode
(digit × row)
Reduced-size ANK: 10×10
Half-size character: 10×5
Kanji character: 5×5
LED
red, green one place, and blue 1 place
Buzzer
Loudness (3-level) / tone adjustable
Vibration motor
Strength (3-level) / duration adjustable
Contents
Year, month, date, hour, minute, second
Accuracy
± 90 seconds per month
Interface
Wireless LAN
3 key
5 key
Specification
IEEE 802.11 b/g/n compliant
Frequency
2412~2472MHz (1~13ch)
Maximum output
0.0026W/MHz
Access method
Infrastructure mode (STA)
Security
WEP,WPA,WPA2
Data and time are lost
when the main battery
is removed.
IEEE 802.11b
OPH-5000i
1st
Item
Specification
Bluetooth
Note
Network stack
TCP/IP, UDP, DHCP, ARP,
SSL, DNS
Frequency
2402 ~ 2480 MHz
Specification
Bluetooth Ver 2.1 compliant
Communication
distance
10 m
Not guaranteed.
Output level
Class 2
Max output 4 dBm
Profile
SPP / HID
ISO/IEC 14443 TYPE A, TYPE B
JISX6319-4
・Full-Speed 12Mbps ( HID/COM )
・Hi-Power Bus-powered supported
Built-in NFC tag
USB
Optical Section
Scanning method
VGA CMOS area sensor
Scanning light source
1 Warm-White LED
Aiming light source
1 green LED
Effective pixels
0.30 million pixels
Horizontal: about 38.0°
Vertical: about 28.9°
UPC-A, UPC-A Add-on, UPC-E,
UPC-E Add-on, EAN-13, EAN-13 Add-on, EAN-8,
EAN-8 Add-on, JAN-8, JAN-13, Code 39, Tri-Optic,
NW-7, Industrial 2 of 5,
Interleaved 2 of 5, S-Code, IATA, Code 93,
Code 128, MSI/Plessey, UK/Plessey, TELEPEN,
Matrix 2 of 5, Chinese Post Matrix 2 of 5,
Code 11, Korean Postal Authority code, Postal
Code
View angle
Symbologies
Refer to Chapter 17.
for details
Supported 1D Symbologies
Minimum resolution
Code 39 : 0.1 mm
PCS 0.9
Curvature
R ≥ 16 mm ( 9-digit JAN)
R ≥ 20 mm (13-digit JAN)
PCS 0.9
Barcode width
100 mm wide 0.2 mm resolution Code 39 (DOF 150
mm) is readable:
Motion Tolerance
UPC 100% moving at 2m/sec (DOF 100 mm)
is readable:
Resolution (0.127)
90 ~ 110
Resolution (0.254)
65 ~ 185
Resolution (0.508)
65 ~ 260
Code 128
Resolution (0.2)
85 ~ 165
UPC
Resolution (0.33)
55 ~ 195
Code 39
Depth of Field
GS1/Composite
Symbologies
Minimum resolution
Supported
2D
Symbologies
Symbologies
GS1 DataBar , GS1 DataBar Limited,
GS1 DataBar Expanded,
Composite GS1 DataBar, Composite GS1-128,
Composite EAN, Composite UPC
GS1 DataBar
: 0.169mm
Composite Code: 0.169mm
PDF417 , MicroPDF417 , Codablock F ,
QR Code , MicroQR Code ,
Data Matrix ( ECC 0 - 140 / ECC 200 ) ,
MaxiCode( Modes 2 to 5 ) , Aztec Code ,
Chinese-sensible code
GS1 DataBar:
formerly called
“RSS”
Disable Code 128
when Codablock F is
enabled.
OPH-5000i
1st
Item
Specification
Minimum resolution (mm)
PDF417
Depth of
field
(mm)
QR Code
DataMatrix
PDF417
: 0.169 mm
QR Code : 0.169 mm
DataMatrix : 0.169 mm
Note
PCS 0.9
Resolution (0.169)
85~ 135
Resolution (0.254)
65 ~ 180
Resolution (0.212)
90 ~ 110
Resolution (0.381)
55 ~ 180
Resolution (0.254)
85 ~ 135
PCS 0.9
Pitch : ±70°
Common
Scan angle
Skew : ±70°
Tilt
: ±360°
Power Section
Minimum PCS
0.2 or more
Main battery
Lithium-ion 1100 mAh (typ.)
Up-time
20 hours or more
*1
Charging time
Less than 3 hour
Using dedicated
cradle.
Room temperature
25℃
Feeding system
Electromagnetic guidance wireless charging,
microUSB
Operating (charging) voltage
4.5 ~ 5.5V
Current
consumption
Charging
Less than 500 mA
Operating
-10 ~ 50°C
Storage
-20 ~ 60°C
Operating
20 ~ 85%
Storage
20 ~ 85%
Fluorescent
10,000 lx or less
Temperature
Environmental Specifications
Humidity
Ambient light
immunity
Sunlight
Vibration
Drop
Dust and drip proof
LED safety
Regulatory Compliance
Product safety
EMC
European conformity
100,000 lx or less
MRD 32% or more
Charging with USB
No condensing
No frost
UPC 100%
Optical axis angle 75°
Distance: 100mm
10 Hz ~ 100 Hz, acceleration of 19.6 m/s , 60
minutes per cycle, repeat in each X, Y and Zdirection
Drop the scanner 18 times (6 faces x 3) from a
height of 150 cm onto a concrete floor
IP54 equivalent
JIS C 6802：2011 Class2
IEC 60825-1 Ed.2: 2007 Class 2
CDRH Class Ⅱ
EN60950-1:2005
IEC60950-1:2006
EN 55024:2010
EN 55032:2012+AC: 2013
EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1
EN 300 328 V1.9.1
EN 302 291-2 V1.1.1
FCC Part 15 Subpart C, Subpart B Class A
VCCI Class A
For residential,
commercial and lightindustrial
environments
CE Marking
OPH-5000i
1st
Item
Specification
Note
Certification for Construction Design of Specified
Radio Equipment
Bluetooth logo certification
MFi license
Other
Immunity
Test
ESD
No
distraction
No
malfunction
Air discharge (direct): ±15 kV
Conditions:
IEC61000-4-2
compliant
Air discharge (direct): ±8 kV
Physical
Features
Dimensions
136 × 44 × 30.3(22) (WDH mm)
Weight
Approx. 120 g
() is grip dimension
Not include projection
Excluding accessories
Including main battery
*1: When a barcode is read twice every 10 seconds at room temperature 25℃.
4 Detailed View
12
10
11
13
14
15
16
10
OPH-5000i
1st
Figure 1: Detailed View
11
OPH-5000i
1st
No
Name
LED
LCD
MicroUSB Connecter Cap
Buzzer Orifice
Strap Orifice
Scan Window
Battery Cover
Battery Cover Lock
Charging Coil
10
NFC
11
12
13
Side Trigger Sensor
Trigger Key
Up and Down Key
14
Numeric Keypad
15
16
F1, F2, F3
Power Key
Description
Indicates operational status, such as scanning and
communication.
It is able to be controlled by user’s programs.
Indicates scanned barcodes and operational items.
MicroUSB connector is stored.
Holes for buzzer.
Holes for attaching a hand strap.
LED illumination is emitted from this window to read barcodes.
Rechargeable battery is stored.
Used to lock / open the battery cover.
The charging coil is located here with which the dedicated cradle
can supply power to the scanner.
This is the location of the NFC tag. Hold an NFC reader close to
this area when the tag has to be read.
Start an operation of reading code by touching.
Press when reading code.
Key use for selecting item and moving cursor.
Numeric, enter, decimal point key and the key’s to support these
inputs.
Function key.
Power On/Off key.
12
OPH-5000i
1st
5 Ele
ectrical Specifica
ations
5.1
Electrical Specificati
ions
Su
upply Voltage
Bu
us-power (Cllass)
Cu
urrent consu
umption
5.2
: 4.5-5.5V
: Hi-Powe
er ( 500mA max
m )
: Less tha
an 500mA
Wireless Charging
Fe
eeding system
Po
ower consum
mption
: Electrom
magnetic indu
uction
: Less tha
an 5W
6 Intterface Specifica
ations
The OPH
H-5000i interrface is selec
ctable from th
hree types; USB
/ Blueto
ooth and Wireeless LAN.
6.1
USB Interfa
ace
Interface is Fu
ull Speed USB interface.
6.1.1
Connectorr
Signal Name
Contact
Num
mber
VCC
DATA
A(-)
DATA
A(+)
(NC
C)
GND
Figure 2: micro US
SB B Connecttor
6.1.2
USB Interfa
ace Circuitt
USB Connect
ctor
Pow
wer
Sup
pply
Microcontroller
Figure 3:: Interface Circ
cuit (USB)
13
OPH-5000i
1st
6.2
Bluetooth
The specifications of the OPH-5000i Bluetooth interface are as follows:
Specification
: Bluetooth Ver 2.1 compliant
6.3
Frequency
: 2402 MHz ~ 2480 MHz
Communication distance
: 10 m
Output level
: Class 2 (max 4 dBm)
Implemented profile
: SPP / HID
Communication configuration
: 1 to 1
Operating mode in communication
: Master / Slave mode
Security mode
: Authentication supported
Encryption
: Encryption supported
Wireless LAN
The specifications of the OPH-5000i Bluetooth interface are as follows:
Specification
: IEEE 802.11 b/g/n compliant
6.3.1
6.3.2
6.3.3
6.4
Frequency
: 2412 MHz ~ 2472MHz (1~13ch)
Access method
: Infrastructure mode, (STA)
Security
: WEP 64/128, WPA-TKIP, 128-bit WPA2 CCMP (AES)
Network stack
: IP, TCP, UDP, DHCP, ARP, SSL, DNS
IEEE 802.11b
Maximum output
: 0.0026W/MHz
Supported data rate
: 1, 2, 5.5, 11Mbps
IEEE 802.11g
Maximum output
: 0.0013W/MHz
Supported data rate
: 6, 9, 12,18, 24, 36, 48, 54Mbps
IEEE 802.11n
Maximum output
: 0.0007W/MHz
Supported data rate
: 6.5, 7.2, 13.0, 14.4, 19.5, 21.7, 26.0, 28.9, 39.0, 43.3,
52.0, 57.8, 58.5, 65.0, 72.2Mbps
Built-in NFC Tag
OPH-5000i has NFC tag built-in which record Bluetooth device address.
Frequency
: 13.56MHz
Standard
: ISO/IEC 14443 TYPE A, TYPE B and JISX6319-4
14
OPH-5000i
1st
Total 928 byte
NDEF
Record #1
type: ”application/vnd.bluetooth.ep.oob”
OOB data length: 8 Byte
MAC address: 00:12:6A:xx:xx:xx
Record #2
type: ”T”
TEXT data length: 15 Byte
TEXT data: ”00126Axxxxxx”
Recorded Contents:
Free area
Reserved area
*xx differ depending on the product.
Rewriting from external:
possible
7 Optical Specifications
7.1
Basic Specifications
Item
Scan method
CMOS area sensor (white / black)
Number of effective pixel
(Column) × (Row)
Image capture speed (*1)
Frame rate
Focal distance
Distance from the front edge of scanner
View angle
100 fps
109.2mm
Vertical
Approx. 28.9°
Diagonal
Approx. 46.4°
Color temperature
Warm white
2600～3700K
114lm/W
Color
Green
Peak wavelength
535 nm
Maximum radiation output (*4)
*1
*2
*3, *4
640 × 480 dots
Approx. 38.0°
Maximum radiation output (*3)
Aiming light source
(LED × 1)
Horizontal
Color
Illumination light source
(LED × 1)
Characteristics
87.4m/W
The fastest seed of image capture
Reference value extracted from the datasheet.
Reference value based on the datasheet (25°C, IF = 140 mA ).
15
OPH-5000i
1st
7.2
Aiming Patttern
The aiming iss used for the following p
purpose:
1. Fill light to
o recognize th
he appropria
ate reading ra
ange.
2. Fill light when auto trig
gger is used.
The aiming specifications
s are as follo
ows:
- The horizon
ntal width of the imaging field of view and the horizontal aiminng width are equal at
a distance of L=85±20 mm from the
e front edge of
o the scanner.
- The horizon
ntal imaging field of view at a distance of L=85 mm is 100%±110% of the horizontal
aiming widtth.
Fiigure 4: Aimin
ng Pattern and
d Imaging Range
16
OPH-5000i
1st
8 Technical Specifications
Aim the laser light at the center of a code to scan it. For long distance scanning, ambient light entering
the angle of view may affect the scanning performance. The conditions for technical specifications are
as follows, unless otherwise specified in each section.

Ambient Temperature and Humidity
Ambient Light
Angles
Curvature
Power Supply Voltage
PCS (1D and 2D)
Scanning Test
Barcode Test Sample (1D and 2D)
Room temperature, room humidity
100 ~200 lux (on the surface of a barcode)
Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0°
R=∞
5.0 V
0.9 or higher
Accept the performance with 90% or more success rate
for 10 tries of scan. One reading should be 2 seconds.
Specified below.
< Test chart >
For 1D codes, OPTOELECTRONICS test samples
For GS1 Databar, stacked codes and 2D codes, printed by a dedicated printer for barcode
8.1
Barcode Test Sample
1D Barcodes

Resolution
0.1 mm (3.9 mil)
0.127 mm (5 mil)
0.20 mm (7.9 mil)
0.254 mm (10 mil)
0.508 mm (20 mil)
Symbology
PCS
Code 39
0.9

Resolution
0.20 mm (7.9 mil)
Symbology
Code 128

Resolution
0.330 mm (13 mil)
Size (mm)
26 × 10
11 × 10
100 × 10
32.5 × 10
43 × 25
No. of Digits
16
31
PCS
0.9
Size (mm)
52 × 10
No. of Digits
36
Symbology
PCS
Size (mm)
No. of Digits
12-digit UPC
12-digit EAN
0.9/0.2
31.5 × 24.5
12/13
PCS
0.9
0.9
Size (mm)
12 × 1.5
12 × 3.0
No. of Digits
14
26
GS1 Databar/Composite

Resolution
Symbology
0.169 mm (6.7 mil)
Limited
0.169 mm (6.7 mil)
Limited-Composite
17
OPH-5000i
1st
2D Codes

Resolution
0.169 mm (6.7 mil)
0.254 mm (10 mil)

Resolution
0.212 mm (8.4 mil)
0.381 mm (15 mil)

Resolution
0.212 mm (8.4 mil)
0.254 mm (10 mil)
Error Correction
PCS
Level-3
0.9
Error Correction
PCS
0.9
Model
PCS
ECC200
0.9
Size (mm)
23 × 10
35 × 15
No. of Character
Size (mm)
5×5
11 × 11
No. of Character
Size (mm)
4×4
No. of Character
6×6
58
44
40
* The size is outline dimensions excluding the quiet zones.
18
OPH-5000i
1st
8.2
Scan Area and Depth of Field
The scan area is the depth of field range, measured from the front edge of the scanner, swept
over the entire scan arc.
18
50
150
100
200
250
300
Resolution 0 127mm
Resolution 0 254mm
Resolution 0 508mm
Resolution 0 2mm
Resolution 0 33mm
Resolution 0 169mm
Resolution 0 254mm
Resolution 0 212mm
Resolution 0 381mm
Resolution 0 254mm
[Unit: mm]
[単位：mm]
Figure 5: Scan Area and Depth of Field
19
OPH-5000i
1st
8.3
Printed Contrast Signal (PCS)
0.2 or higher

MRD
: 32% and higher
(70% or higher reflectivity of space and quiet zone)
: 125mm from the front edge of the scanner
: UPC specified in Chapter 8. (Resolution: 0.33 mm, PCS: 0.3)
Distance
Barcode Sample
MRD = Minimum reflectance of white bar - Maximum reflectance of black bar
PCS =
8.4
Minimum Resolution
1D Code
GS1-Databar
Stacked Code
2D Code
: 0.1 mm (3.9 mil) Code 39 specified in Chapter 8.1
: 0.169 mm (6.7 mil) GS1 Databar Limited specified in Chapter 8.1
: 0.169 mm (6.7 mil) PDF417, GS1 Databar Limited Composite specified in Chapter 8.1
: 0.169 mm (6.7 mil) QR Code, Data Matrix specified in Chapter 8.1

Barcode Sample
Distance
Angle
Curvature
8.5
Reflectance of white space – Reflectance of black bar
Reflectance of white space
: The above codes specified in Chapter 8.1
: 95 mm from the front edge of the scanner
: α = 0°, β =＋15°, γ = 0°
:R=∞
Barcode Width
Code 39 with width of 100 mm and resolution of 0.2 mm can be read

Barcode Sample
Distance
Angle
Curvature
: 0.20 mm Code 39 / PCS 0.9 specified in Chapter 8.1
: 155 mm from the front edge of the scanner
: α = 0°, β =＋15°, γ = 0°
:R=∞
Figure 6: Wide Barcode
20
OPH-5000i
1st
8.6
Pitch, Skew and Tilt
Pitch
Skew
Tilt
: α = ±50°
: β = ±50°
: γ = ±180°

Barcode Sample
: 0.33 mm Code 39 specified in Chapter 7.1
Distance
: 125 mm from the front edge of the scanner
Curvature
:R=∞
* For the pitch angle and tilt angle measurement, set the skew angle β = +15°
β
γ
Figure 7: Pitch, Skew and Tilt
8.7
Curvature
0.33 mm 12-digit UPC
0.15 mm 10-digit Codabar(NW-7)

Barcode Sample
Distance
Angle
: R ≧ 20 mm
: R ≧ 16 mm
0.33 mm UPC, 0.15 mm Codabar specified in Chapter 8.1
105 mm from the edge of the scan engine
Skew angle β = +15°
バーコード
Barcode
Figure 8: Curvature
Note: Scanning may fail due to the specular reflection of the LED illumination when the reflectivity of the barcode
is high.
21
OPH-5000i
1st
8.8
Motion Tolerance
UPC 100% can be read when it is moving at 2m/s.

Ambient Temperature and Humidity
Ambient Light
Distance
PCS (1D and 2D)
Barcode Sample
: Room temperature and Room humidity
: 500 ~ 1000 lux
: 125 mm from the front edge of the scanner
: 0.9 or higher
: Refer to Chapter 8.1.
Figure 9: Motion Tolerance
* Scanning may fail due to the specular reflection of LED illumination when the reflectivity is high.
22
OPH-5000i
1st
9 Environmental Specifications
9.1
Temperature
Scanning performance is guaranteed when the ambient temperature around the scanner is
within the following ranges:
Operating Temperature
Storage Temperature
: -10 ~ 50 °C
: -20 ~ 60 °C
Please charge when the temperature is between 0 and 40°C. When the temperature is over 40°C,
charging may stop to prevent battery breakdown.

Barcode
Distance
Angle
Curvature
Scanning Test
Power consumption
9.2
: Resolution 0.33 mm, 9-digit Code 39 specified in Section 9.1.
: 125 mm from the front edge of the scanner
: α = 0°, β =＋15°, γ = 0°
:R=∞
: Scan at interval 1000ms
: 3.7V
Humidity
Scanning performance is guaranteed when the ambient humidity around the scanner is within
the following ranges:
Operating Humidity
: 20 ~ 85%RH (no condensation, no frost)
Storage Humidity
: 20 ~ 85%RH (no condensation, no frost)

Barcode
Distance
Angle
Curvature
Scanning Test
Power consumption
9.3
: Resolution 0.33 mm, 9-digit Code 39 specified in Section 9.1.
: 125 mm from the front edge of the scanner
: α = 0°, β =＋15°, γ = 0°
:R=∞
: Scan at interval 1000ms
: 3.7V
Ambient Light Immunity
Scanning performance is guaranteed when the range of illumination on a barcode surface is
between zero and the following values:
Incandescent light:
Fluorescent light:
Sunlight:

Barcode:
Distance:
Angle:
Curvature:
Power consumption:
10,000 lx
10,000 lx
100,000 lx
Resolution 0.33 mm, 9-digit Code 39 specified in Section 9.1.
125 mm from the front edge of the scanner
α = 0°, β =＋15°, γ = 0°
R=∞
3.7V
Avoid direct or specula reflection from the light source as it may blind the scanners optical receiver.
23
OPH-5000i
1st
9.4
Dust and Drip Proof
IEC IP54 equivalent
Protection against solid objects: Level 5 equivalent (Dust proof type)
Prevent dust ingress to inside. Even if slight dust intrusion will not inhibit normal operation.
Protection against liquids: Level 4 equivalent (Splash proof type)
Protected against water splash from any direction.
* () is JIS drip-proof type.
9.5
Vibration Tolerance (without packing)
There shall be no malfunction after the following vibration test.
Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an acceleration
velocity of 19.6m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in the non-operating state.
Repeat this of each X, Y and Z direction.
9.6
Vibration Tolerance (in individual packing)
There shall be no malfunction after the following vibration test.
Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerattion
velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in individually packaged state.
Repeat this of each X, Y and Z direction.
9.7
Drop Impact Tolerance (without packaging)
There shall be no malfunction after the following drop test.
Drop test: Drop the scanner 18 times in total (3 times at each 6 face), from a height of 150 cm
onto a concrete floor as shown below.
150cm
Figure 10: Drop Test
24
OPH-5000i
1st
9.8
Drop Impact Tolerance (in individual packaging)
There shall be no sign of malfunction after the following drop test.
Drop test: Drop an individually packaged scanner 10 times in total, at any of 1 corner, 3 edges,
and 6 faces, from a height of 150 cm onto a concrete floor.
9.9
Electrostatic Discharge Immunity
Air discharge
±8 kV max. (No malfunction)
±15 kV max. (No destruction)
Measurement environment
An electrostatic testing device compliant with IEC 61000-4-2
is used.
330 Ω
150 pF
Discharge resistance
Charging capacitor
25
OPH-5000i
1st
10 Regulatory Compliance
10.1 LED Safety
IEC 62471:2006 Exempt_Group
10.2 Product Safety
EN60950-1:2005
IEC60950-1:2006
10.3 EMC
・EN 55024:2010
・EN 55032:2012+AC: 2013
・EN 301 489-1 V1.9.2
・EN 301 489-17 V2.2.1
・EN 300 328 V1.9.1
・EN 302 291-2 V1.1.1
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to the manufacturer’s instructions
26
OPH-5000i
1st
FCC Part 15 Subpart C, Subpart B Class A
Federal Communications Commission Notices
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case users will be required
to correct the interference at their own expense.
Harmful Interference Notice
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with FCC SAR exposure limits set forth for an uncontrolled
environment. SAR compliance for using the equipment in close proximity to the human
body has been evaluated at 0mm.
This equipment must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provide with antenna installation
instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
VCCI Class A
This is a Class A product based on the standard of the Voluntary Control Council for Interference
(VCCI). If this equipment is used in a domestic environment, radio interference may occur, in
which case the user may be required to take corrective actions.
27
OPH-5000i
1st
10.4 Other
・Bluetooth logo certification
・MFi license
・Certification for Construction Design of Specified Radio Equipment
・Classification of Specified
Radio Equipment
・Model Name
・Certificate Number
Article 2 Paragraph 1, Item 19 Low power data
communication system in 2.4 GHz band
OPA-26X1
201-125603
・Classification of Specified
Radio Equipment
・Wireless LAN Model Name
・Certificate Number
Article 2 Paragraph 1, Item 19 Low power data
communication system in 2.4 GHz band
ATWINC1500-MR210PB
007-AD0199
11 RoHS
RoHS compliance.
RoHS: The restriction of the use of certain hazardous substances in electrical and
electronic equipment, 2011/65/EU
12 Reliability
MTBF (Mean Time Between Failures)
50,000 hours
13 Precautions
Handle this product carefully. Do not deliberately subject it to any of the following.
(1) Shock:
・ Do not drop this product from a height greater than specified in this manual.
・ Do not place this product under or between any heavy items.
・ Do not swing the cable around.
(2) Temperature Conditions:
・ Do not use this product at temperatures outside the specified range.
・ Do not pour boiling water on this product.
・ Do not throw this product into a fire.
(3) Foreign Materials:
・ Do not immerse this product in water or other liquid.
・ Do not expose this product to chemicals.
(4) Others
・ Do not disassemble this product.
・ Do not use this product near a radio or a TV. It may cause reception problems.
・ This product may be affected by a momentary voltage drop caused by lightning.
・ Do not place pieces of metal such as coins, nor attach metallic foil to the area where the
charging coil is located.
Also, do not affix anything which prevent from placing OPH-5000i to cradle.
・ Although surface of LCD is tempered glass, but do not drop or hit any hard object on purpose.
28
OPH-5000i
1st
13.1 Radio Law
This product qualifies as specified radio equipment for radio stations of 2.4 GHz band data
communication system and has obtained the Certification for Construction
Design of Specified Radio Equipment. Therefore, radio station license is not required in Japan.
The following activities are prohibited under the Radio Law:
・Remodelling and disassembly
・Peeling off the certificate label
Do not use this equipment under the following environment, as radio interference may affect
other device and end up with causing physical or material damage.
・Safety apparatus and medical device for human body protection
・Environment where is concerned to cause serious damage
13.2 Bluetooth
・This product supports Bluetooth wireless communication with other Bluetooth devices that
have the same profile
・This product complies with Bluetooth standards; however, its communication performance
with untested devices is not guaranteed.
・Bluetooth devices use the 2.4 GHz frequency band that is shared among other devices. It
may affect the communication speed and distance between this product and the host device.
・The communication speed and distance vary depending on the interference and radio wave
condition between this product and the host device.
13.3 Frequency Band
This product uses the 2.4 GHz frequency band. Read carefully the followings before using this
product.
In the frequency band of this product, scientific, medical and industrial devices including
microwaves are used. Also other radio stations including local private radio station for mobile
object identification requiring license for such as manufacturing lines at factories, specific
power-saving radio station requiring no license and amateur radio station are managed.
1. Make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before
using this product.
2. In case that radio interference occurs between this product and “other radio stations,” change
the service space immediately, or stop transmitting radio wave to avoid the interference.
3. If you have any questions or troubles, please contact our sales office.
13.4 Usage Note
・Do not attach metal foil or piece of metal to charging coil storage part. Also, do not insert
metal like coins between scanner and dedicated cradle when charging.
・Be careful of dust or foreign objects inserting when opening battery cover. Precisions dust
and drip proof may not be satisfied.
* This specification manual is subject to change without prior notice.
29
OPH-5000i
1st
14 Product Labels
The product labels are affixed to the scanner as shown below.
Figure 11: Product Label Position
30
OPH-5000i
1st
15 Packaging Specifications
15.1 Individual Packaging
Assembled package size: 125 × 112 × 40 (WDH mm)
Weight: Approx. xx kg
Packing
bag
梱包袋：
2回、巻き付ける
Wrap twice
Poly bag
Neck strap
ﾈｯｸｽﾄﾗｯﾌﾟ
MicroUSB
cable
MicroUSBｹｰﾌﾞﾙ
Place as the
イラストの向きで
drawing
on top.
一番上に入れる
Individual box
個装箱
ｼﾘｱﾙNo. の 表 示 に つ い て
『 123456 』
123456＝ 製品ｼﾘｱﾙNo.
6桁のｼﾘｱﾙNo.を 表示
LDCを上にして入れる
Put in with LCD upward
【原産国表示】～country of origin～
中国生産（produced in China）＝MADE IN CHINA
日本生産（produced in Japan）＝MADE IN JAPAN
【国内向】 個装箱ﾊﾞｰｺｰﾄﾞﾗﾍﾞﾙ (3A0002）
余った梱包袋の上に
Place neck strap on
top of the space
ネックストラップを入れる
Model No.
MADE IN
▲ ▲▲ ▲ ▲
MODEL NEME
OPH-5000i-BLK
Spec No.
*ﾊﾞｰｺｰﾄﾞ*
*UF1OPH5000*
Serial No.
* △ △ △ △ △ △*
Quantity
Ｒｏ
Figure 12: Individual Packaging
31
OPH-5000i
1st
32
OPH-5000i
1st
15.2 C
Collective Packaging
10
00pcs per bo
ox
Asssembled pa
ackage size
Weight: Appro
ox. xx kg
: 595 × 520
0 × 245 (WDH mm)
No
ote: ‘Ro mark’ on the trays and
a boxes ind
dicates that the
e product is Ro
oHS compliannt as is declare
ed by
Op
ptoelectronicss Co., Ltd.
3: Collective Packaging
Figure 13
33
OPH-5000i
1st
16 Physical Features
16.1 Dimensions
136 × 44 × 30.3(22) (DWH mm)
() is grip dimensions
16.2 Weight
Approx. 120 g (excluding accessories)
16.3 Mechanical Drawing
Unit: mm
Figure 14: Mechanical Drawing
34
OPH-5000i
1st
17 Supported Symbologies
17.1 Default Setting
The scanner is set to default by reading the following menu label.
Default
@MENU_OPTO@ZZ@SO@ZZ@OTPO_UNEM@
17.2 Supported Symbologies
17.2.1 1D Barcodes
Code type
UPC
UPC Add-on 2
UPC Add-on 5
EAN(JAN)
EAN Add-on 2
EAN Add-on 5
EAN-13
EAN-13 Add-on 2
EAN-13 Add-on 5
EAN-8
EAN-8 Add-on 2
EAN-8 Add-on 5
Code 39
○
Minimum
length
○
Default
Remarks
○
○
○
Not transmit ST/SP
Tri-Optic
○
Not transmit ST/SP
Codabar (NW7)
○
Not transmit ST/SP
Industrial 2of 5
○
Interleaved 2of 5
S-Code
Code 128
○
○
Code 93
○
IATA
○
MSI/Plessey
UK/Plessey
Telepen
Code 11
Matrix 2 of 5
Chinese Post Matrix 2 of 5
Korean Postal Authority
Intelligent Mail Barcode
POSTNET
JPN (Customer Barcode)
GS1 conversion (setting required)
35
OPH-5000i
1st
17.2.2 GS1 Databar, Composite Code
Code type
GS1 DataBar
・GS1 DataBar Omnidirectional
・GS1 DataBar Truncated
・GS1 DataBar Stacked
・GS1 DataBar Stacked Omnidirectional
GS1 DataBar Limited
GS1 DataBar Expanded
・GS1 DataBar Expanded
・GS1 DataBar Expanded Stacked
Composite GS1-DataBar
・CC-A
・CC-B
・Limited CC-A
・Limited CC-B
・Expanded CC-A
・Expanded CC-B
Composite GS1-128
・CC-A
・CC-B
・CC-C
Composite EAN
・EAN-13 CC-A
・EAN-13 CC-B
・EAN-8 CC-A
・EAN-8 CC-B
Composite UPC
・UPC-A CC-A
・UPC-A CC-B
・UPC-E CC-A
・UPC-E CC-B
Default
Remarks
○
GS1 conversion (setting required)
○
○
GS1 conversion (setting required)
GS1 conversion (setting required)
GS1 conversion (setting required)
GS1 conversion (setting required)
17.2.3 2D Codes
Code type
PDF417
Default
Remarks
○
Micro PDF417
Codablock F
QR Code
○
Micro QR
○
Data Matrix (ECC 200)
○
GS1 conversion (setting required)
GS1 conversion (setting required)
Data Matrix (ECC 000-140)
Aztec Code
○
Aztec Runes
Chinese-sensible code
Maxi Code
* The supported symbologies vary depending on specifications for the application to be loaded.
36

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Format                          : application/pdf
Creator                         : skonno0287
Title                           : Microsoft Word - SS16051(SS16003)_PX49 OPH-5000i_Preliminary_171127_Eng vcci a.docx
Create Date                     : 2017:12:21 13:43:38+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2017:12:21 13:43:38+09:00
Producer                        : Acrobat Distiller 8.3.1 (Windows)
Document ID                     : uuid:41c0679f-671c-4fde-82a8-c7e219284389
Instance ID                     : uuid:d19aa1ce-0c28-4d9e-bc12-c2f81677e27a
Page Count                      : 36
Author                          : skonno0287