OPTOELECTRONICS OPN3102I Data Collector User Manual

OPTOELECTRONICS Co., Ltd. Data Collector Users Manual

Users Manual

1st OThis m OPDanual provdataSPECIFIPNData Collevides specia collector ICATIONS MN-3ector withifications fowith 2D imMANUAL 310h Bluetootor the OPNmager scan02th N-3102i Blunner. Oi uetooth OPN-3102i 1st 1
OPN-3102i 1st 2 SPECIFICATIONS MANUAL The information in this document is subject to change without notice. Document History Model Number: OPN-3102i Specification Number: SS16057 Edition: 1st Original Spec Number: (SS15053) Date: 30-September-2016 2016 Copyright Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase excluding batteries. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages. Packaging The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your data collector or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty. Trademarks Trademarks used are the property of their respective owners. Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184 SUPPORT USA Europe Phone: 800-636-0090 Email: support@opticonusa.com Email: support@opticon.com Web: www.opticonusa.com Web: www.opticon.com
OPN-3102i 1st 3 SPECIFICATIONS MANUAL Revision History Product Name : OPN-3102i Edition Date Page Section Description of Changes 1st 2016/09/30 - -
OPN-3102i 1st 4 SPECIFICATIONS MANUAL Contents 1 Abstract ............................................................................................................................ 6 2 Overview .......................................................................................................................... 6 3 Basic Specifications ....................................................................................................... 7 4 Detailed View ................................................................................................................. 10 5 Electrical Specifications ............................................................................................... 11 5.1 USB ........................................................................................................................................ 11 5.2 Wireless Charging .................................................................................................................. 11 6 Interface Specifications ................................................................................................ 11 6.1 USB Interface ......................................................................................................................... 11 6.1.1 Connector ....................................................................................................................... 11 6.1.2 USB Interface Circuit ...................................................................................................... 11 6.2 Bluetooth ................................................................................................................................ 12 6.3 NFC Tag ................................................................................................................................. 12 7 Optical Specifications ................................................................................................... 13 7.1 Basic Specifications ............................................................................................................... 13 7.2 Aiming Pattern ........................................................................................................................ 14 8 Technical Specifications .............................................................................................. 15 8.1 Barcode Test Sample ............................................................................................................. 16 8.2 Scan Area and Depth of Field ................................................................................................ 17 8.3 Printed Contrast Signal (PCS) ............................................................................................... 19 8.4 Minimum Resolution ............................................................................................................... 19 8.5 Barcode Width ........................................................................................................................ 19 8.6 Pitch, Skew and Tilt ................................................................................................................ 20 8.7 Curvature ................................................................................................................................ 20 8.8 Scanning from LCD Screen.................................................................................................... 21 8.9 Motion Tolerance .................................................................................................................... 21 9 Environmental Specifications ...................................................................................... 22 9.1 Temperature ........................................................................................................................... 22 9.2 Humidity .................................................................................................................................. 22 9.3 Ambient Light Immunity .......................................................................................................... 22 9.4 Dust and Drip Proof ................................................................................................................ 22 9.5 Vibration Strength (without packing) ...................................................................................... 23 9.6 Vibration Strength (in individual packing) ............................................................................... 23 9.7 Drop Impact Strength (without packaging) ............................................................................. 23 9.8 Drop Impact Strength (in individual packaging) ..................................................................... 23 9.9 Electrostatic Discharge Immunity ........................................................................................... 23 10 Regulatory Compliance ................................................................................................ 24 10.1 LED Safety ............................................................................................................................. 24 10.2 Product Safety ........................................................................................................................ 24 10.3 EMC ........................................................................................................................................ 24
OPN-3102i 1st 5 SPECIFICATIONS MANUAL 10.4 Other ....................................................................................................................................... 25 11 RoHS .............................................................................................................................. 25 12 Reliability ....................................................................................................................... 25 13 Precautions .................................................................................................................... 25 13.1 Radio Law............................................................................................................................... 26 13.2 Bluetooth ................................................................................................................................ 26 13.3 Frequency Band ..................................................................................................................... 26 14 Product Labels .............................................................................................................. 27 15 Packaging Specifications ............................................................................................. 28 15.1 Individual Packaging .............................................................................................................. 28 15.2 Collective Packaging .............................................................................................................. 29 16 Physical Features .......................................................................................................... 30 16.1 Dimensions ............................................................................................................................. 30 16.2 Weight .................................................................................................................................... 30 16.3 Mechanical Drawing ............................................................................................................... 30 17 Supported Symbologies ............................................................................................... 31 17.1 Default Setting ........................................................................................................................ 31 17.2 Supported Symbologies ......................................................................................................... 31 17.2.1 1D Barcodes ................................................................................................................... 31 17.2.2 GS1 Databar, Composite Code ...................................................................................... 32 17.2.3 2D Codes ........................................................................................................................ 32 Table of Figures Figure 1: Detailed View ......................................................................................................................... 10 Figure 2: micro USB B Connector ......................................................................................................... 11 Figure 3: Interface Circuit (USB) ........................................................................................................... 11 Figure 4: Aiming Pattern and Imaging Range ....................................................................................... 14 Figure 5: Scanning conditions ............................................................................................................... 15 Figure 6: Scan Area and Depth of Field ................................................................................................ 18 Figure 7: Wide Barcode ......................................................................................................................... 19 Figure 8: Pitch, Skew and Tilt ................................................................................................................ 20 Figure 9: Curvature ................................................................................................................................ 20 Figure 10: Motion Tolerance.................................................................................................................. 21 Figure 11: Drop Test .............................................................................................................................. 23 Figure 12: Product Label Position ......................................................................................................... 27 Figure 13: Individual Packaging ............................................................................................................ 28 Figure 14: Collective Packaging ............................................................................................................ 29 Figure 15: Mechanical Drawing ............................................................................................................. 30
OPN-3102i 1st 6 SPECIFICATIONS MANUAL 1 Abstract This manual provides specifications for the OPN-3102i compact 2D data collector with built-in Bluetooth. 2 Overview The OPN-3102i is 2D imager scanner built-in and output scanned barcode data using the Bluetooth interface. ・OPN-3102i is handy and simple data collector. ・All barcode data scanned is transmitted to a host device through the USB interface or Bluetooth. ・The scanner can work with many Bluetooth-enabled host devices, such as PCs, tablet PCs and smart phones. ・Bluetooth SPP (Serial Port Profile) and HID (Human Interface Device Profile) are implemented. ・Built-in NFC tag facilitate the Bluetooth connection ・The scanner can read barcodes from LCD screens. ・A green LED aiming line toward a target barcode can help the users find the appropriate scanning position. ・Alcohol can be used to wipe the scanner clean ・The power source is 3.7 V 600 mAh (typ.) Li-ion polymer battery. ・The charging is done through a dedicated charging cradle CRD-3000 or USB interface. ・The scanner is Apple MFi certified.
OPN-3102i 1st 7 SPECIFICATIONS MANUAL 3 Basic Specifications Item Specification Note Control Section CPU 32 bit CISC / 96 MHz FROM 512 Kbyte + 32 Kbyte SRAM 96 Kbyte FROM (storage) 1 Mbyte For data area only Input Section Key type 2 key: trigger, function Indicator LED 2 bi-colors LEDs (red, green) and 1 blue LED Buzzer Loudness (3-level) / tone adjustable Vibration motor Strength (3-level) / duration adjustable RTC Contents Year, month, date, hour, minute, second Data and time are lost when the main battery is removed. Accuracy ± 90 seconds per month Interface Bluetooth Frequency 2402 ~ 2480 MHz Specification Bluetooth Ver 2.1 compliant Communication distance 10 m Not guaranteed. Output level Class 2 Max output 4 dBm Profile SPP / HID NFC tag ISO/IEC 14443 TYPE A, TYPE B JISX6319-4 USB ・Full-Speed 12Mbps ( HID/COM ) ・Hi-Power Bus-powered supported Optical Section Scanning method VGA CMOS area sensor Scanning light source 1 Warm-White LED Aiming light source 1 green LED Effective pixels 0.30 million pixels View angle Horizontal: about 38.0° Vertical: about 26.4° Supported 1D Symbologies Symbologies UPC-A, UPC-A Add-on, UPC-E, UPC-E Add-on, EAN-13, EAN-13 Add-on, EAN-8, EAN-8 Add-on, JAN-8, JAN-13, Code 39, Tri-Optic, NW-7, Industrial 2 of 5, Interleaved 2 of 5, S-Code, IATA, Code 93, Code 128, MSI/Plessey, UK/Plessey, TELEPEN, Matrix 2 of 5, Chinese Post Matrix 2 of 5, Code 11, Korean Postal Authority code, Postal Code Refer to Chapter 17. for details Minimum resolution Code 39 : 0.1 mm PCS 0.9 Curvature R ≥ 16 mm (10-digit Codabar 0.15mm) R ≥ 20 mm (12-digit UPC) PCS 0.9 Barcode width 100 mm wide 0.2 mm resolution Code 39 (DOF 150 mm) is readable:
OPN-3102i 1st 8 SPECIFICATIONS MANUAL Item Specification Note Motion Tolerance UPC 100% moving at 2m/sec (DOF 100 mm) is readable: Depth of Field Code 39 Resolution (0.127) 90 ~ 110 Resolution (0.254) 65 ~ 185 Resolution (0.508) 65 ~ 260 Code 128 Resolution (0.2) 85 ~ 165 UPC Resolution (0.33) 55 ~ 195 GS1/CompositeSymbologies GS1 DataBar , GS1 DataBar Limited, GS1 DataBar Expanded, Composite GS1 DataBar, Composite GS1-128, Composite EAN, Composite UPC GS1 DataBar: formerly called “RSS” Minimum resolution GS1 DataBar : 0.127mm Composite Code: 0.127 mm Supported 2D Symbologies Symbologies PDF417 , MicroPDF417 , Codablock F , QR Code , MicroQR Code , Data Matrix ( ECC 0 - 140 / ECC 200 ) , MaxiCode( Modes 2 to 5 ) , Aztec Code , Chinese-sensible code Disable Code 128 when Codablock F is enabled. Minimum resolution (mm) PDF417 : 0.169 mm QR Code : 0.169 mm DataMatrix : 0.169 mm PCS 0.9 Depth of field (mm) PDF417 Resolution (0.169) 85~ 135 PCS 0.9 TBD Resolution (0.254) 65 ~ 180 QR Code Resolution (0.212) 90 ~ 110 Resolution (0.381) 55 ~ 180 DataMatrix Resolution (0.254) 85 ~ 135 Common Scan angle Pitch : ±70° Skew : ±70° Tilt : ±360° Minimum PCS 0.2 or more MRD 32% or more Scanning from LCD screen White brightness 30 cd/m2 or more Contrast ratio 100:1 or more Power Section Main battery Lithium-polymer 600 mAh (typ.) Up-time 10 hours or more *1 Feeding system Electromagnetic guidance wireless charging, microUSB Operating (charging) voltage 4.5 ~ 5.5V Charging with USB Current consumption Charging Less than 500 mA Environmental Specifications Temperature Operating -10 ~ 50°C Storage -20 ~ 60°C Humidity Operating 20 ~ 85% No condensing No frost Storage 20 ~ 85% Ambient light immunity Fluorescent 10,000 lx or less Sunlight 100,000 lx or less
OPN-3102i 1st 9 SPECIFICATIONS MANUAL Item Specification Note Vibration 10 Hz ~ 100 Hz, acceleration of 19.6 m/s2, 60 minutes per cycle, repeat once in each X, Y and Z-direction Drop Drop the scanner 18 times (6 faces x 3) from a height of 150 cm onto a concrete floor Dust and drip proof IP54 equivalent Regulatory Compliance LED safety IEC 62471:2006 Exempt_Group Peak Wavelength： 624 nm Product safety EN60950-1:2005 IEC60950-1:2006 EMC EN 55024:2010 EN 55032:2012+AC :2013 EN 301 489-1 V1.9.2 EN 301 489-17 V2.1.1 EN 300 328 V1.9.1 EN 302 291-2 V1.1.1 FCC Part 15 Subpart C, Subpart B ClassB VCCI Class B For residential, commercial and light-industrial environments European conformity CE Marking Certification for Construction Design of Specified Radio Equipment Other Bluetooth logo certification MFi license Immunity Test ESD No distraction Air discharge (direct): ±15 kV Conditions: IEC61000-4-2 compliant No malfunction Air discharge (direct): ±8 kV Physical FeaturesDimensions 83.0 × 36 × 21.5 (WDH mm) Weight Approx. 60 g Excluding accessories*1: When a barcode is read twice every 10 seconds at room temperature in a constant Bluetooth connection (SPP master mode).
OPN-3102i 1st 10 SPECIFICATIONS MANUAL 4 Detailed View 123456789 Figure 1: Detailed View No Name Description 1 Scan Window LED illumination is emitted from this window to read barcodes. 2 USB Cap Cap for USB connector part used to make the scanner IP54 water tight. 3 Trigger Key Press this key to enable the laser and start reading barcodes. 4 Function Key The function of this key depends on the installed application. 5 LED Indicates operating status, such as bar code reading, Bluetooth connection, warning etc. 6 Buzzer Orifice Holes for buzzer. 7 Strap Orifice Holes for attaching a hand strap. 8 Charging Coil The charging coil is located here with which the dedicated cradle can supply power to the scanner. 9 NFC This is the location of the NFC tag. Hold an NFC reader close to this area when the tag has to be read.
5 Ele5.1 USuBuCu 5.2 WFePo 6 IntThe OPN6.1 UIn 6.1.1 C 6.1.2 ectrical SUSB upply Voltagus-power (Clurrent consuWireless Ceeding systeower consumterface SN-3102i suppUSB Interfaterface is FuConnectorSignal NVCDATADATA(NCGNUSB InterfaSpecificae lass)umption harging m mption Specificaports two typace ull Speed USr Name CC A(-) A(+) C) D ace Circuit PowSupMicro-controller SPECIFIations : 4.5-5.5V: 500mA m: Less tha: Electrom: Less thaations pes of interfacB interface.Contact Num1 2 3 4 5 t Figure 3: wer pply ICATIONS MV max (Hi-Powan 500mA magnetic induan 5W ces; USB anmber : Interface CircMANUAL wer) uction nd Bluetooth.Figucuit (USB) re 2: micro USUSB Connect OSB B Connect ctor OPN-3102i 1st 11 tor
OPN-3102i 1st 12 SPECIFICATIONS MANUAL 6.2 Bluetooth The specifications of the OPN-3102i Bluetooth interface are as follows: Frequency : 2402 ~ 2480 MHz Specification : Bluetooth Ver 2.1 compliant Communication distance : 10 m Output level : Class 2 (max 4 dBm) Implemented profile : SPP / HID Communication configuration : 1 to 1 Operating mode in communication : Master / Slave mode Security mode : Authentication supported Encryption : Encryption supported 6.3 NFC Tag OPN-3102i has NFC tag built-in which record Bluetooth device address. Frequency: 13.56MHz Standard : ISO/IEC 14443 TYPE A, TYPE B and JISX6319-4 Recorded Contents: : Total 928 byte NDEF Record #1 type: ”application/vnd.bluetooth.ep.oob” OOB data length: 8 Byte MAC address: 00:12:6A:xx:xx:xx Record #2 type: ”T” TEXT data length: 15 Byte TEXT data: ”00126Axxxxxx” Free area Reserved area *xx will differ according to product. Rewriting from external: possible
OPN-3102i 1st 13 SPECIFICATIONS MANUAL 7 Optical Specifications 7.1 Basic Specifications Item Characteristics Scan method CMOS area sensor (white / black) - Number of effective pixel (Column) × (Row) 640 × 480 dots Image capture speed (*1) Frame rate 100 fps Focal distance Distance from the front edge of scanner 109.2 mm View angle Horizontal Approx. 38.0° Vertical Approx. 28.9° Diagonal Approx. 46.4° Illumination light source (LED × 1) Color Warm white Color temperature 2600～3700K Radiant efficiency(*2) 114lm/W Aiming light source (LED × 1) Color Green Peak wavelength 535 nm Radiant efficiency (*2) 114lm/W *1 The fastest seed of image capture *2 Reference value extracted from the LED datasheet.
7.2 AT12 T-- Aiming PatThe aiming is1. Fill light to2. Fill light wThe aiming s- The horizona distance - The horizonhorizontal attern s used for tho recognize thhen auto trigspecificationsntal width of of L=144.2±4ntal imaging aiming widthFiSPECIFIe following phe appropriagger is used. s are as follothe imaging 40 mm from field of view . igure 4: Aimin ICATIONS Mpurpose: ate reading ra ows: field of viewthe front edg at a distanc ng Pattern andMANUAL ange. and the horge of the scae of L=144.2d Imaging Ranizontal aiminanner. 2 mm is 0%±ge Ong width are ±10% of the OPN-3102i 1st 14 equal at
OPN-3102i 1st 15 SPECIFICATIONS MANUAL 8 Technical Specifications Aim the laser light at the center of a code to scan it. The conditions for technical specifications are as follows, unless otherwise specified in each section. <Conditions> Ambient Temperature and Humidity Room temperature, room humidity Ambient Light 100 ~200 lux (on the surface of a barcode) Angles Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0° Curvature R = ∞ Power Supply Voltage 5.0 V (USB) PCS (1D and 2D) 0.9 or higher Scanning Test Accept the performance with 90% or more success rate for 10 tries of scan. One reading should be 2 seconds. Barcode Test Sample (1D and 2D) Specified below. < Test chart > For 1D codes, OPTOELECTRONICS test samples For GS1 Databar, stacked codes and 2D codes, printed by a dedicated printer for barcode βγ+++--- Figure 5: Scanning conditions Center of image
OPN-3102i 1st 16 SPECIFICATIONS MANUAL 8.1 Barcode Test Sample 1D Barcodes <Code 39> Resolution Symbology PCS Size (mm) No. of Digits 0.1 mm (3.9 mil) Code 39 0.9 8.5 × 10 4 0.127 mm (5 mil) 32 × 10 15 0.20 mm (7.9 mil) 100 × 10 31 0.254 mm (10 mil) 32.5 × 12 7 0.508 mm (20 mil) 36 × 25 4 <Code 128> Resolution Symbology PCS Size (mm) No. of Digits 0.20 mm (7.9 mil) Code 128 0.9 42 × 10 16 <UPC> Resolution Symbology PCS Size (mm) No. of Digits 0.330 mm (13 mil) 12-digit UPC 12-digit EAN 0.9/0.2 31.5 × 25.0 12/13 <Codabar> Resolution Symbology PCS Size (mm) No. of Digits 0.150 mm (6 mil) Codabar(NW-7) 0.9 20 × 10 10 GS1 Databar/Composite <GS1-limited> Resolution Symbology PCS Size (mm) No. of Digits 0.169 mm (6.7 mil) Limited 0.9 12 × 1.5 14 0.169 mm (6.7 mil) Limited-Composite 0.9 12 × 3.0 26 2D Codes <PDF417> Resolution Error Correction PCS Size (mm) No. of Character0.169 mm (6.7 mil) Level-3 0.9 23 × 10 58 0.254 mm (10 mil) 35 × 15 <QR Code: Model-2> Resolution Error Correction PCS Size (mm) No. of Character0.212 mm (8.4 mil) M 0.9 5 × 5 44 0.381 mm (15 mil) 11 × 11 <Data Matrix> Resolution Model PCS Size (mm) No. of Character0.212 mm (8.4 mil) ECC200 0.9 4 × 4 40 0.254 mm (10 mil) 6 × 6 * The size is outline dimensions excluding the quiet zones.
OPN-3102i 1st 17 SPECIFICATIONS MANUAL 8.2 Scan Area and Depth of Field The scanner is able to read in the area between the two arcs that are centered on the scan origin with a center line distance from the front of the scanner as indicated for each resolution. Symbology Resolution Depth of Field (mm) Code 39 0.127mm 60 ～ 105 0.254mm 70 ～ 205 0.508mm 80 ～ 390 Code 128 0.20mm 80 ～ 165 UPC 0.33mm 65 ～ 260 PDF417 0.169mm 65 ～ 125 0.254mm 50 ～ 180 QR Code 0.169mm 70 ～ 95 0.381mm 35 ～ 225 Data Matrix 0.212mm 60 ～ 130 0.254mm 50 ～ 150 <Conditions> Barcode Sample The above codes specified in Chapter 8.1 Angle α = 0°, β =＋15°, γ = 0°
OPN-3102i 1st 18 SPECIFICATIONS MANUAL 050 100 150 200 250 300 350 4002" 4" 6" 8" 10" 12" 14" 16"0"05050 252575 75100 100 125 1501251500" 2"2" 1"1"3" 3"4" 4" 5" 6"5"6"[ mm ][ inch ][ mm ][ inch ]Code 39Code 128100%EAN/UPCPDF417QR CodeData Matrix0.127mm ( 5mil )0.254mm ( 10mil )0.508mm ( 20mil )0.20mm ( 7.9mil )0.33mm( 13mil )0.169mm( 10mil )0.254mm( 10mil )0.169mm( 6.7mil )0.381mm( 15mil )0.212mm( 8.4mil )0.254mm( 10mil )45017" Figure 6: Scan Area and Depth of Field
OPN-3102i 1st 19 SPECIFICATIONS MANUAL 8.3 Printed Contrast Signal (PCS) 0.2 or higher <Conditions> MRD : 10% and higher (70% or higher reflectivity of space and quiet zone) Distance : 125mm from the front edge of the scanner Barcode Sample : UPC specified in Chapter 8. (Resolution: 0.33 mm, PCS: 0.3)MRD = Minimum reflectance of white bar - Maximum reflectance of black bar * Be sure to keep the optical window clean without dirt or scratches, or it may have a detrimental effect on the reading characteristics. 8.4 Minimum Resolution 1D Code : 0.1 mm (3.9 mil) Code 39 specified in Chapter 8.1 GS1-Databar : 0.127 mm (5 mil) GS1 Databar Limited specified in Chapter 8.1 Stacked Code : 0.169 mm (6.7 mil) PDF417, GS1 Databar Limited Composite specified in Chapter 8.1 2D Code : 0.169 mm (6.7 mil) QR Code, Data Matrix specified in Chapter 8.1 <Conditions> Barcode Sample The above codes specified in Chapter 8.1 Distance 95 mm from the front edge of the scanner Angle α = 0°, β =＋15°, γ = 0° Curvature R = ∞ 8.5 Barcode Width Code 39 with width of 100 mm and resolution of 0.2 mm can be read <Conditions> Barcode Sample 0.20 mm Code 39 / PCS 0.9 specified in Chapter 8.1 Distance 150 mm from the front edge of the scanner Angle α = 0°, β =＋15°, γ = 0° Curvature R = ∞ Figure 7: Wide Barcode PCS = Reflectance of white space – Reflectance of black bar Reflectance of white space
OPN-3102i 1st 20 SPECIFICATIONS MANUAL 8.6 Pitch, Skew and Tilt Pitch : α = ±70° Skew : β = ±70° Tilt : γ = ±360° <Conditions> Barcode Sample : 0.33 mm UPC specified in Chapter 8.1 Distance : 125 mm from the front edge of the scanner Curvature : R = ∞ * For the pitch angle and tilt angle measurement, set the skew angle β = +15° βγ+++--- Figure 8: Pitch, Skew and Tilt 8.7 Curvature 0.33 mm 12-digit UPC: R ≧ 20 mm 0.15 mm 10-digit Codabar(NW-7): R ≧ 16 mm <Conditions> Barcode Sample 0.33 mm UPC, 0.15 mm Codabar specified in Chapter 8.1 Distance 105 mm from the edge of the scan engine Angle Skew angle β = +15° Rバーコード Figure 9: Curvature Note: The reading performance may deteriorate if there is specular reflection of the laser light, this typically will occur when the reflectivity of the barcode is high. Barcode
OPN-3102i 1st 21 SPECIFICATIONS MANUAL 8.8 Scanning from LCD Screen Barcodes displayed on LCD screens (brightness of white part 30 cd/m2 or more, contrast ratio 100:1 or more) can be read. <Conditions> Barcode : UPC, resolution 0.33 mm specified in Chapter 8.1. Ambient light : 100 lx or less Distance : 95 mm from the front edge of the scanner Angle : α = 0°, β = 0°, γ = 0° LCD screen type : Transmissive (backlight) TFT Illumination mode : Disable Contrast ratio = Brightness of white parts Brightness of black parts * The barcode resolution is the value when displayed on the LCD screen. * The width of barcode element is an integral multiple of pixel width of LCD screen. * The reading characteristics may deteriorate due to the specular reflection of LED illumination when the reflectivity is high. 8.9 Motion Tolerance UPC 100%/EAN can be read when it is moving at 2.54m/s. <Conditions> Ambient Temperature and Humidity : Room temperature and Room humidity Ambient Light : 500 ~ 1000 lux Distance : 125 mm from the front edge of the scanner PCS (1D and 2D) : 0.9 or higher Barcode Sample : UPC 0.33mm specified in Chapter 8.1. * Scanning may fail due to the specular reflection of LED illumination when the reflectivity is high. Figure 10: Motion Tolerance
OPN-3102i 1st 22 SPECIFICATIONS MANUAL 9 Environmental Specifications 9.1 Temperature Scanning performance is guaranteed when the ambient temp. is within the following range: Operating Temperature: -10 ~ 50 °C Storage Temperature: -20 ~ 60 °C * Please charge when the temperature is between 0 and 40°C. When the temperature is over 40°C, charging may stop to prevent battery breakdown. 9.2 Humidity Scanning performance is guaranteed when the ambient humidity within following range: Operating Humidity: 20 ~ 85%RH (no condensation, no frost) Storage Humidity: 20 ~ 85%RH (no condensation, no frost) 9.3 Ambient Light Immunity Scanning performance is guaranteed when the illumination on a barcode surface is between zero and the following values: Incandescent light: 10,000 lx Fluorescent light: 10,000 lx Sunlight: 100,000 lx <Conditions> Barcode: 0.33 mm JAN specified in Chapter 8.1. Distance: 95 mm from the front edge of the scanner Angle: α = 0°, β =＋15°, γ = 0° Curvature: R = ∞ Power-supply voltage: 3.7V * Avoid direct or specula reflection from the light source as it may blind the scanners optical receiver. 9.4 Dust and Drip Proof IEC IP54 equivalent Protection against solid objects: Level 5 equivalent (Dust proof type) Prevent dust ingress to inside. Even if slight dust intrusion will not inhibit normal operation. Protection against liquids: Level 4 equivalent (Splash proof type) Protected against water splash from any direction. * () is JIS drip-proof type.
OPN-3102i 1st 23 SPECIFICATIONS MANUAL 9.5 Vibration Strength (without packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in non-operating state. Repeat this in each X, Y and Z direction. 9.6 Vibration Strength (in individual packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes per cycle) in individually packaged state. Repeat this in each X, Y and Z direction. 9.7 Drop Impact Strength (without packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop the scanner 18 times in total (3 times at each 6 face), from a height of 150 cm onto a concrete floor as shown below. 150cm Figure 11: Drop Test 9.8 Drop Impact Strength (in individual packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop an individually packaged scanner 10 times in total, at any of 1 corner, 3 edges, and 6 faces, from a height of 150 cm onto a concrete floor. 9.9 Electrostatic Discharge Immunity Air discharge ±8 kV max. (No malfunction) ±15 kV max. (No destruction) Measurement environment An electrostatic testing device compliant with IEC 61000-4-2 Discharge resistance 330 Ω Charging capacitor 150 pF
OPN-3102i 1st 24 SPECIFICATIONS MANUAL 10 Regulatory Compliance 10.1 LED Safety IEC 62471:2006 Exempt_Group 10.2 Product Safety EN60950-1:2005 IEC60950-1:2006 10.3 EMC R & TTE Directive ・EN 55024:2010 ・EN 55032:2012+AC:2013 ・EN 301 489-1 V1.9.2 ・EN 301 489-17 V2.1.1 ・EN 300 328 V1.9.1 ・EN 302 291-2 V1.1.1 FCC Part 15 Subpart C, Subpart B ClassB VCCI Class B Federal Communications Commission Notices This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Harmful Interference Notice This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the receiver's • Consult a dealer or an experienced radio/TV technician for assistance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference.
10.4 O・・ ・ 11 RoRoRoele 12 ReMTBF (M 13 PrHa (1・・・ (2・・・ (3・・ Ot・・・ “Made formean that connect spand has beperformanoperation oregulatory accessory performanOther Bluetooth loMFi license Certification・ClassificaRadio Equ・Model Na・CertificateoHS oHS compliaoHS: The resectronic equieliability Mean Time Becautionandle this pr) Shock: Do not drop Do not plac Do not swin2) Temperatu Do not use Do not pou Do not thro3) Foreign Ma Do not imm Do not expothers Do not disa Do not use This producr iPod,” “Madean electronic pecifically to iPeen certified bce standards.of this device standards. Plwith iPod, iPhce. ogo certificatin for Construcation of Specifiuipment ame e Number ance. striction of thpment, 2011Between Failns roduct carefup this producce this produng the cable ure Conditionthis product r boiling watew this produaterials: merse this proose this prodassemble thisthis product ct may be affSPECIFI for iPhone,” aaccessory haPod, iPhone, oby the developApple is not reor its complianease note thahone, or iPad on ction Designed AcO2e use of cert1/65/EU ures) 50,0ully. Do not dct from a heigct under or baround. ns: at temperatuer on this proct into a fire.oduct in wateduct to chems product. near a radiofected by a m ICATIONS Mand “Made foras been designor iPad, respeper to meet Apesponsible fornce with safetat the use of thmay affect wirn of SpecifiedArticle 2 ParacommunicatioOPA-26X1 201-125603tain hazardo000 hours deliberately sght greater thbetween any ures outsideoduct. . er or other liqmicals. o or a TV. It mmomentary vMANUAL r iPad” ned to ctively, pple r the ty and his reless d Radio Equiagraph 1, Itemon system in 2us substancubject it to ahan specifiedheavy items the specifiequid. may cause revoltage drop pment m 19 Low po.4 GHz band es in electricny of the folld in this mans. d range. eception procaused by lig Oower data cal and lowing. ual. blems. ghtning. OPN-3102i 1st 25
OPN-3102i 1st 26 SPECIFICATIONS MANUAL ・ Do not attach piece of metal or metal foil to the back of charging coil stored part and NFC coil stored part. Also, do not fix anything that prevents placing to charging cradle. ・ Please securely close the USB cap to keep the waterproof. ・ Do not pull strong, fold and bend the cables. ・ Do not add shock or apply load to jack and connector. ・ When charging is completed, please remove USB cable from connector. 13.1 Radio Law This product qualifies as specified radio equipment for radio stations of 2.4 GHz band data communication system and has obtained the Certification for Construction Design of Specified Radio Equipment. Therefore, radio station license is not required in Japan. The following activities are prohibited under the Radio Law: ・Remodeling and disassembly ・Peeling off the certificate label Do not use this equipment under the following environment, as radio interference may affect other device and end up with causing physical or material damage. ・Safety apparatus and medical device for human body protection ・Environment where is concerned to cause serious damage 13.2 Bluetooth ・This product supports Bluetooth wireless communication with other Bluetooth devices that have the same profile ・This product complies with Bluetooth standards; however, its communication performance with untested devices is not guaranteed. ・Bluetooth devices use the 2.4 GHz frequency band that is shared among other devices. It may affect the communication speed and distance between this product and the host device. ・The communication speed and distance vary depending on the interference and radio wave condition between this product and the host device. 13.3 Frequency Band This product uses the 2.4 GHz frequency band. Read carefully the followings before using this product. In the frequency band of this product, scientific, medical and industrial devices including microwaves are used. Also other radio stations including local private radio station for mobile object identification requiring license for such as manufacturing lines at factories, specific power-saving radio station requiring no license and amateur radio station are managed. 1. Make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before using this product. 2. In case that radio interference occurs between this product and “other radio stations,” change the service space immediately, or stop transmitting radio wave to avoid the interference. 3. If you have any questions or troubles, please contact our sales office. * This specification manual is subject to change without prior notice.
OPN-3102i 1st 27 SPECIFICATIONS MANUAL 14 Product Labels The product labels are affixed to the scanner as shown below. Figure 12: Product Label Position Unit: mm
15 Pa15.1 InAsW ackagingndividual Pssembled paWeight: ApproPlace ind*Place wPut MicroUSBproduct side bMake it thinneoverlap on thePlace the conand taped sideg SpecificPackagingackage size: ox. kg nto the box witdown without twith Opticon lo*Do not foOPN-3B cable and by side. er so as not to e product. necter on right se at the back. SPECIFIcationsg 125 × 112 ×Figure 13h folded side taped. ogo upward.old the barcode w102 side Place conne ICATIONS M 40 (WDH m3: Individual Pwhen pastingneck strap on toctor, and place MANUAL mm) Packaging op of USB cableQSG at the topDispla123456=Prod Dispe . Individ Oay for the Ser『123456』duct serial numplay 6-digets sdual box label:OPN-3102i 1st 28 rial-No. mber. serial number.3A0002
15.2 C10AsW Note: ‘Rodeclared Collective P00pcs per bossembled paWeight: Approo mark’ on the by OptoelectrPaEnter battery battery」and pho22-31-31」. Aneither side of thA: Barcode SerStick the labelsPackagingox ackage size ox. kg trays and the ronics Co., Ltdacking box: 5B000type 「Lithium ionone number 「01-nd place 1pc next he packing box labrial Label for Packs on both front andSPECIFIg : 595 × 520boxes for thed. Figure 1408 (100pcs per bon -24-to bel. king Box d back side of the ICATIONS M0 × 245 (WDe product indic4: Collective Pox) boxB: MiAttacserial MANUAL H mm) cates that the pPackaging ssing Serial Numbh this label when l number s are ouproduct is RoHber Label: there are more that of order (not in a5StTh OHS compliant an 3 labels of whia correct sequenceStepshe order of serial-OPN-3102i 1st 29 which is ich e). -No.
OPN-3102i 1st 30 SPECIFICATIONS MANUAL 16 Physical Features 16.1 Dimensions 83.0 × 36.0 × 21.5 (DWH mm) 16.2 Weight Approx. 60 g (excluding accessories) 16.3 Mechanical Drawing Figure 15: Mechanical Drawing Unit: mm
OPN-3102i 1st 31 SPECIFICATIONS MANUAL 17 Supported Symbologies 17.1 Default Setting The scanner is set to default by reading the following menu label. Recorded contents of the NFC tag will also return to default. Default 17.2 Supported Symbologies 17.2.1 1D Barcodes Code type Default Minimum length Remarks UPC ○ - UPC Add-on 2 UPC Add-on 5 EAN(JAN) ○ - EAN Add-on 2 EAN Add-on 5 EAN-13 ○ EAN-13 Add-on 2 EAN-13 Add-on 5 EAN-8 ○ EAN-8 Add-on 2 EAN-8 Add-on 5 Code 39 ○ 1 Not transmit ST/SP Tri-Optic ○ - Not transmit ST/SP Codabar (NW7) ○ 1 Not transmit ST/SP Industrial 2of 5 ○ 5 Interleaved 2of 5 ○ 6 S-Code 5 Code 128 ○ 1 GS1 conversion (setting required) Code 93 ○ 1 IATA ○ 5 MSI/Plessey 3 UK/Plessey 2 Telepen 1 Code 11 1 Matrix 2 of 5 5 Chinese Post Matrix 2 of 5 - Korean Postal Authority - Intelligent Mail Barcode - POSTNET - JPN (Customer Barcode) - @MENU_OPTO@ZZ@SO@ZZ@OTPO_UNEM@
OPN-3102i 1st 32 SPECIFICATIONS MANUAL 17.2.2 GS1 Databar, Composite Code Code type Default Remarks GS1 DataBar ・GS1 DataBar Omnidirectional ・GS1 DataBar Truncated ・GS1 DataBar Stacked ・GS1 DataBar Stacked Omnidirectional ○ GS1 conversion (setting required) GS1 DataBar Limited ○ GS1 DataBar Expanded ・GS1 DataBar Expanded ・GS1 DataBar Expanded Stacked ○ Composite GS1-DataBar ・CC-A ・CC-B ・Limited CC-A ・Limited CC-B ・Expanded CC-A ・Expanded CC-B GS1 conversion (setting required) Composite GS1-128 ・CC-A ・CC-B ・CC-C GS1 conversion (setting required) Composite EAN ・EAN-13 CC-A ・EAN-13 CC-B ・EAN-8 CC-A ・EAN-8 CC-B GS1 conversion (setting required) Composite UPC ・UPC-A CC-A ・UPC-A CC-B ・UPC-E CC-A ・UPC-E CC-B GS1 conversion (setting required) 17.2.3 2D Codes Code type Default Remarks PDF417 ○ Micro PDF417 Codablock F QR Code ○ GS1 conversion (setting required) Micro QR ○ Data Matrix (ECC 200) ○ GS1 conversion (setting required) Data Matrix (ECC 000-140) Aztec Code ○ Aztec Runes Chinese-sensible code Maxi Code

Navigation menu